PhysicsFrameSplineEditor::PhysicsFrameSplineEditor(const GuiText& caption, GuiPane* dockPane, GuiTheme::Ref theme) :
GuiWindow(caption,
theme,
Rect2D::xywh(0,0,100,40),
GuiTheme::TOOL_WINDOW_STYLE,
GuiWindow::HIDE_ON_CLOSE),
m_selectedControlPointIndex(0),
m_isDocked(dockPane != NULL) {
m_cachedPhysicsFrameString = CFrame(m_cachedPhysicsFrameValue).toAny().unparse();
m_spline.append(CFrame());
m_surface = new SplineSurface(this);
m_nodeManipulator = ThirdPersonManipulator::create();
m_nodeManipulator->setEnabled(false);
GuiPane* p = dockPane;
if (p == NULL) {
// Place into the window
p = pane();
} else {
// No need to show the window
setVisible(false);
}
GuiPane* cpPane = p->addPane("Control Point", GuiTheme::ORNATE_PANE_STYLE);
cpPane->moveBy(0, -15);
if (false) {
static float x,y,z;
//static const float translationControlWidth = 80;
static const float rotationControlWidth = 40;
//static const float captionWidth = 10;
static const float rotationPrecision = 0.1;
//static const float translationPrecision = 0.001;
static const std::string degrees = "\xba";
cpPane->beginRow(); {
GuiNumberBox<float>* c = NULL;
static std::string s = "100.0, 100.0, 100.0";
GuiControl* t = cpPane->addTextBox("xyz (", &s);
t->setWidth(155);
t->setCaptionWidth(26);
cpPane->addLabel(") m");
c = cpPane->addNumberBox("", &x, degrees, GuiTheme::NO_SLIDER, -finf(), finf(), rotationPrecision);
c->moveBy(20, 0);
c->setCaptionWidth(0); c->setWidth(rotationControlWidth); c->setUnitsSize(8);
c = cpPane->addNumberBox("", &y, degrees, GuiTheme::NO_SLIDER, -finf(), finf(), rotationPrecision);
c->setCaptionWidth(0); c->setWidth(rotationControlWidth); c->setUnitsSize(8);
c = cpPane->addNumberBox("", &z, degrees, GuiTheme::NO_SLIDER, -finf(), finf(), rotationPrecision);
c->setCaptionWidth(0); c->setWidth(rotationControlWidth); c->setUnitsSize(8);
} cpPane->endRow();
}
cpPane->addLabel("Control point: 0");
cpPane->addNumberBox("Time", Pointer<float>(this, &PhysicsFrameSplineEditor::selectedNodeTime, &PhysicsFrameSplineEditor::setSelectedNodeTime), "s");
cpPane->addTextBox("", Pointer<std::string>(this, &PhysicsFrameSplineEditor::selectedNodePFrameAsString, &PhysicsFrameSplineEditor::setSelectedNodePFrameFromString));
cpPane->beginRow(); {
GuiButton* b = cpPane->addButton("Add new", this, &PhysicsFrameSplineEditor::addControlPoint);
b->moveBy(-2, -7);
m_removeSelectedButton = cpPane->addButton("Remove", this, &PhysicsFrameSplineEditor::removeSelectedControlPoint);
} cpPane->endRow();
cpPane->pack();
GuiControl* prev = p->addCheckBox("Loop with final interval", Pointer<bool>(this, &PhysicsFrameSplineEditor::cyclic, &PhysicsFrameSplineEditor::setCyclic));
GuiPane* finalIntervalPane = p->addPane("", GuiTheme::NO_PANE_STYLE);
finalIntervalPane->moveRightOf(prev);
finalIntervalPane->moveBy(-1, -5);
static int m_explicitFinalInterval = 0;
m_finalIntervalChoice[0] = finalIntervalPane->addRadioButton("automatic", 0, &m_explicitFinalInterval);
finalIntervalPane->beginRow(); {
m_finalIntervalChoice[1] = finalIntervalPane->addRadioButton("", 1, &m_explicitFinalInterval);
m_finalIntervalBox = finalIntervalPane->addNumberBox("", &m_spline.finalInterval, "s", GuiTheme::NO_SLIDER, -1.0f, 10000.0f, 0.001f);
m_finalIntervalBox->setWidth(76);
m_finalIntervalBox->moveBy(-2, 0);
} finalIntervalPane->endRow();
pack();
setEnabled(false);
}
PhysicsFrameSplineEditor::PhysicsFrameSplineEditor(const GuiText& caption, GuiPane* dockPane, shared_ptr<GuiTheme> theme) :
GuiWindow(caption,
theme,
Rect2D::xywh(0,0,100,40),
GuiTheme::TOOL_WINDOW_STYLE,
GuiWindow::HIDE_ON_CLOSE),
m_selectedControlPointIndex(0),
m_isDocked(dockPane != NULL)
{
m_cachedPhysicsFrameString = CFrame(m_cachedPhysicsFrameValue).toAny().unparse();
m_spline.append(CFrame());
m_surface.reset(new SplineSurface(this));
m_nodeManipulator = ThirdPersonManipulator::create();
m_nodeManipulator->setEnabled(false);
GuiPane* p = dockPane;
if (p == NULL) {
// Place into the window
p = pane();
} else {
// No need to show the window
setVisible(false);
}
GuiPane* cpPane = p->addPane("Control Point", GuiTheme::ORNATE_PANE_STYLE);
cpPane->moveBy(0, -15);
Array<std::string> indexList;
getIndexRange(1, indexList);
m_selectedControlPointDropDown = cpPane->addDropDownList("Control point: ", indexList, &m_selectedControlPointIndex,
GuiControl::Callback(this, &PhysicsFrameSplineEditor::controlPointDropDownCallback));
cpPane->addNumberBox("Time", Pointer<float>(this, &PhysicsFrameSplineEditor::selectedNodeTime, &PhysicsFrameSplineEditor::setSelectedNodeTime), "s");
cpPane->addTextBox("", Pointer<std::string>(this, &PhysicsFrameSplineEditor::selectedNodePFrameAsString, &PhysicsFrameSplineEditor::setSelectedNodePFrameFromString));
cpPane->beginRow(); {
GuiButton* b = cpPane->addButton("Add new", this, &PhysicsFrameSplineEditor::addControlPoint);
b->moveBy(-2, -7);
m_removeSelectedButton = cpPane->addButton("Remove", this, &PhysicsFrameSplineEditor::removeSelectedControlPoint);
} cpPane->endRow();
cpPane->pack();
GuiPane* exPane = p->addPane("Extrapolation Mode", GuiTheme::NO_PANE_STYLE);
exPane->beginRow(); {
GuiControl* linearButton = exPane->addRadioButton("Linear", SplineExtrapolationMode::LINEAR, this,
&PhysicsFrameSplineEditor::extrapolationMode, &PhysicsFrameSplineEditor::setExtrapolationMode);
GuiControl* clampedButton = exPane->addRadioButton("Clamped", SplineExtrapolationMode::CLAMP, this,
&PhysicsFrameSplineEditor::extrapolationMode, &PhysicsFrameSplineEditor::setExtrapolationMode);
clampedButton->moveRightOf(linearButton);
clampedButton->moveBy(-145, 0);
GuiControl* cyclicButton = exPane->addRadioButton("Cyclic", SplineExtrapolationMode::CYCLIC, this,
&PhysicsFrameSplineEditor::extrapolationMode, &PhysicsFrameSplineEditor::setExtrapolationMode);
cyclicButton->moveRightOf(clampedButton);
cyclicButton->moveBy(-140, 0);
} exPane->endRow();
exPane->pack();
GuiPane* inPane = p->addPane("Interpolation Mode", GuiTheme::NO_PANE_STYLE);
inPane->beginRow(); {
GuiControl* linearButton = inPane->addRadioButton("Linear", SplineInterpolationMode::LINEAR, this,
&PhysicsFrameSplineEditor::interpolationMode, &PhysicsFrameSplineEditor::setInterpolationMode);
GuiControl* cubicButton = inPane->addRadioButton("Cubic", SplineInterpolationMode::CUBIC, this,
&PhysicsFrameSplineEditor::interpolationMode, &PhysicsFrameSplineEditor::setInterpolationMode);
cubicButton->moveRightOf(linearButton);
cubicButton->moveBy(-145, 0);
} inPane->endRow();
inPane->pack();
GuiPane* finalIntervalPane = p->addPane("Final Interval", GuiTheme::NO_PANE_STYLE);
finalIntervalPane->moveRightOf(exPane);
finalIntervalPane->moveBy(-100, -5);
static int m_explicitFinalInterval = 0;
m_finalIntervalChoice[0] = finalIntervalPane->addRadioButton("automatic", 0, &m_explicitFinalInterval);
finalIntervalPane->beginRow(); {
m_finalIntervalChoice[1] = finalIntervalPane->addRadioButton("", 1, &m_explicitFinalInterval);
m_finalIntervalBox = finalIntervalPane->addNumberBox("", &m_spline.finalInterval, "s", GuiTheme::NO_SLIDER, -1.0f, 10000.0f, 0.001f);
m_finalIntervalBox->setWidth(76);
m_finalIntervalBox->moveBy(-2, 0);
} finalIntervalPane->endRow();
pack();
setEnabled(false);
}
void App::makeGUI() {
// Turn on the developer HUD
debugWindow->setVisible(true);
developerWindow->cameraControlWindow->setVisible(true);
developerWindow->videoRecordDialog->setEnabled(true);
GFont::Ref iconFont = GFont::fromFile(System::findDataFile("icon.fnt"));
// Create a scene management GUI
GuiPane* scenePane = debugPane->addPane("Scene", GuiTheme::ORNATE_PANE_STYLE);
scenePane->moveBy(0, -10);
scenePane->beginRow(); {
// Example of using a callback; you can also listen for events in onEvent or bind controls to data
m_sceneDropDownList = scenePane->addDropDownList("", Scene::sceneNames(), NULL, GuiControl::Callback(this, &App::loadScene));
static const char* reloadIcon = "q";
static const char* diskIcon = "\xcd";
scenePane->addButton(GuiText(reloadIcon, iconFont, 14), this, &App::loadScene, GuiTheme::TOOL_BUTTON_STYLE)->setWidth(32);
scenePane->addButton(GuiText(diskIcon, iconFont, 18), this, &App::saveScene, GuiTheme::TOOL_BUTTON_STYLE)->setWidth(32);
} scenePane->endRow();
const int w = 120;
scenePane->beginRow(); {
scenePane->addCheckBox("Axes", &m_showAxes)->setWidth(w);
scenePane->addCheckBox("Light sources", &m_showLightSources);
} scenePane->endRow();
scenePane->beginRow(); {
scenePane->addCheckBox("Wireframe", &m_showWireframe)->setWidth(w);
} scenePane->endRow();
static const char* lockIcon = "\xcf";
scenePane->addCheckBox(GuiText(lockIcon, iconFont, 20), &m_preventEntityDrag, GuiTheme::TOOL_CHECK_BOX_STYLE);
scenePane->pack();
GuiPane* entityPane = debugPane->addPane("Entity", GuiTheme::ORNATE_PANE_STYLE);
entityPane->moveRightOf(scenePane);
entityPane->moveBy(10, 0);
m_entityList = entityPane->addDropDownList("Name");
// Dock the spline editor
m_splineEditor = PhysicsFrameSplineEditor::create("Spline Editor", entityPane);
addWidget(m_splineEditor);
developerWindow->cameraControlWindow->moveTo(Point2(window()->width() - developerWindow->cameraControlWindow->rect().width(), 0));
m_splineEditor->moveTo(developerWindow->cameraControlWindow->rect().x0y0() - Vector2(m_splineEditor->rect().width(), 0));
entityPane->pack();
GuiPane* infoPane = debugPane->addPane("Info", GuiTheme::ORNATE_PANE_STYLE);
infoPane->moveRightOf(entityPane);
infoPane->moveBy(10, 0);
// Example of how to add debugging controls
infoPane->addLabel("You can add more GUI controls");
infoPane->addLabel("in App::onInit().");
infoPane->addButton("Exit", this, &App::endProgram);
infoPane->pack();
// More examples of debugging GUI controls:
// debugPane->addCheckBox("Use explicit checking", &explicitCheck);
// debugPane->addTextBox("Name", &myName);
// debugPane->addNumberBox("height", &height, "m", GuiTheme::LINEAR_SLIDER, 1.0f, 2.5f);
// button = debugPane->addButton("Run Simulator");
debugWindow->pack();
debugWindow->setRect(Rect2D::xywh(0, 0, window()->width(), debugWindow->rect().height()));
}