void StandardHypoTestDemo(const char* infile = "",
const char* workspaceName = "combined",
const char* modelSBName = "ModelConfig",
const char* modelBName = "",
const char* dataName = "obsData",
int calcType = 0, // 0 freq 1 hybrid, 2 asymptotic
int testStatType = 3, // 0 LEP, 1 TeV, 2 LHC, 3 LHC - one sided
int ntoys = 5000,
bool useNC = false,
const char * nuisPriorName = 0)
{
/*
Other Parameter to pass in tutorial
apart from standard for filename, ws, modelconfig and data
type = 0 Freq calculator
type = 1 Hybrid calculator
type = 2 Asymptotic calculator
testStatType = 0 LEP
= 1 Tevatron
= 2 Profile Likelihood
= 3 Profile Likelihood one sided (i.e. = 0 if mu < mu_hat)
ntoys: number of toys to use
useNumberCounting: set to true when using number counting events
nuisPriorName: name of prior for the nnuisance. This is often expressed as constraint term in the global model
It is needed only when using the HybridCalculator (type=1)
If not given by default the prior pdf from ModelConfig is used.
extra options are available as global paramwters of the macro. They major ones are:
generateBinned generate binned data sets for toys (default is false) - be careful not to activate with
a too large (>=3) number of observables
nToyRatio ratio of S+B/B toys (default is 2)
printLevel
*/
// disable - can cause some problems
//ToyMCSampler::SetAlwaysUseMultiGen(true);
SimpleLikelihoodRatioTestStat::SetAlwaysReuseNLL(true);
ProfileLikelihoodTestStat::SetAlwaysReuseNLL(true);
RatioOfProfiledLikelihoodsTestStat::SetAlwaysReuseNLL(true);
//RooRandom::randomGenerator()->SetSeed(0);
// to change minimizers
// ROOT::Math::MinimizerOptions::SetDefaultStrategy(0);
// ROOT::Math::MinimizerOptions::SetDefaultMinimizer("Minuit2");
// ROOT::Math::MinimizerOptions::SetDefaultTolerance(1);
/////////////////////////////////////////////////////////////
// First part is just to access a user-defined file
// or create the standard example file if it doesn't exist
////////////////////////////////////////////////////////////
const char* filename = "";
if (!strcmp(infile,""))
filename = "results/example_combined_GaussExample_model.root";
else
filename = infile;
// Check if example input file exists
TFile *file = TFile::Open(filename);
// if input file was specified byt not found, quit
if(!file && strcmp(infile,"")){
cout <<"file not found" << endl;
return;
}
// if default file not found, try to create it
if(!file ){
// Normally this would be run on the command line
cout <<"will run standard hist2workspace example"<<endl;
gROOT->ProcessLine(".! prepareHistFactory .");
gROOT->ProcessLine(".! hist2workspace config/example.xml");
cout <<"\n\n---------------------"<<endl;
cout <<"Done creating example input"<<endl;
cout <<"---------------------\n\n"<<endl;
}
// now try to access the file again
file = TFile::Open(filename);
if(!file){
// if it is still not there, then we can't continue
cout << "Not able to run hist2workspace to create example input" <<endl;
return;
}
/////////////////////////////////////////////////////////////
// Tutorial starts here
////////////////////////////////////////////////////////////
// get the workspace out of the file
RooWorkspace* w = (RooWorkspace*) file->Get(workspaceName);
if(!w){
cout <<"workspace not found" << endl;
return;
}
w->Print();
// get the modelConfig out of the file
ModelConfig* sbModel = (ModelConfig*) w->obj(modelSBName);
// get the modelConfig out of the file
RooAbsData* data = w->data(dataName);
// make sure ingredients are found
if(!data || !sbModel){
w->Print();
cout << "data or ModelConfig was not found" <<endl;
return;
}
// make b model
ModelConfig* bModel = (ModelConfig*) w->obj(modelBName);
// case of no systematics
// remove nuisance parameters from model
if (noSystematics) {
const RooArgSet * nuisPar = sbModel->GetNuisanceParameters();
if (nuisPar && nuisPar->getSize() > 0) {
std::cout << "StandardHypoTestInvDemo" << " - Switch off all systematics by setting them constant to their initial values" << std::endl;
RooStats::SetAllConstant(*nuisPar);
}
if (bModel) {
const RooArgSet * bnuisPar = bModel->GetNuisanceParameters();
if (bnuisPar)
RooStats::SetAllConstant(*bnuisPar);
}
}
if (!bModel ) {
Info("StandardHypoTestInvDemo","The background model %s does not exist",modelBName);
Info("StandardHypoTestInvDemo","Copy it from ModelConfig %s and set POI to zero",modelSBName);
bModel = (ModelConfig*) sbModel->Clone();
bModel->SetName(TString(modelSBName)+TString("B_only"));
RooRealVar * var = dynamic_cast<RooRealVar*>(bModel->GetParametersOfInterest()->first());
if (!var) return;
double oldval = var->getVal();
var->setVal(0);
//bModel->SetSnapshot( RooArgSet(*var, *w->var("lumi")) );
bModel->SetSnapshot( RooArgSet(*var) );
var->setVal(oldval);
}
if (!sbModel->GetSnapshot() || poiValue > 0) {
Info("StandardHypoTestDemo","Model %s has no snapshot - make one using model poi",modelSBName);
RooRealVar * var = dynamic_cast<RooRealVar*>(sbModel->GetParametersOfInterest()->first());
if (!var) return;
double oldval = var->getVal();
if (poiValue > 0) var->setVal(poiValue);
//sbModel->SetSnapshot( RooArgSet(*var, *w->var("lumi") ) );
sbModel->SetSnapshot( RooArgSet(*var) );
if (poiValue > 0) var->setVal(oldval);
//sbModel->SetSnapshot( *sbModel->GetParametersOfInterest() );
}
// part 1, hypothesis testing
SimpleLikelihoodRatioTestStat * slrts = new SimpleLikelihoodRatioTestStat(*bModel->GetPdf(), *sbModel->GetPdf());
// null parameters must includes snapshot of poi plus the nuisance values
RooArgSet nullParams(*bModel->GetSnapshot());
if (bModel->GetNuisanceParameters()) nullParams.add(*bModel->GetNuisanceParameters());
slrts->SetNullParameters(nullParams);
RooArgSet altParams(*sbModel->GetSnapshot());
if (sbModel->GetNuisanceParameters()) altParams.add(*sbModel->GetNuisanceParameters());
slrts->SetAltParameters(altParams);
ProfileLikelihoodTestStat * profll = new ProfileLikelihoodTestStat(*bModel->GetPdf());
RatioOfProfiledLikelihoodsTestStat *
ropl = new RatioOfProfiledLikelihoodsTestStat(*bModel->GetPdf(), *sbModel->GetPdf(), sbModel->GetSnapshot());
ropl->SetSubtractMLE(false);
if (testStatType == 3) profll->SetOneSidedDiscovery(1);
profll->SetPrintLevel(printLevel);
// profll.SetReuseNLL(mOptimize);
// slrts.SetReuseNLL(mOptimize);
// ropl.SetReuseNLL(mOptimize);
AsymptoticCalculator::SetPrintLevel(printLevel);
HypoTestCalculatorGeneric * hypoCalc = 0;
// note here Null is B and Alt is S+B
if (calcType == 0) hypoCalc = new FrequentistCalculator(*data, *sbModel, *bModel);
else if (calcType == 1) hypoCalc= new HybridCalculator(*data, *sbModel, *bModel);
else if (calcType == 2) hypoCalc= new AsymptoticCalculator(*data, *sbModel, *bModel);
if (calcType == 0)
((FrequentistCalculator*)hypoCalc)->SetToys(ntoys, ntoys/nToysRatio);
if (calcType == 1)
((HybridCalculator*)hypoCalc)->SetToys(ntoys, ntoys/nToysRatio);
if (calcType == 2 ) {
if (testStatType == 3) ((AsymptoticCalculator*) hypoCalc)->SetOneSidedDiscovery(true);
if (testStatType != 2 && testStatType != 3)
Warning("StandardHypoTestDemo","Only the PL test statistic can be used with AsymptoticCalculator - use by default a two-sided PL");
}
// check for nuisance prior pdf in case of nuisance parameters
if (calcType == 1 && (bModel->GetNuisanceParameters() || sbModel->GetNuisanceParameters() )) {
RooAbsPdf * nuisPdf = 0;
if (nuisPriorName) nuisPdf = w->pdf(nuisPriorName);
// use prior defined first in bModel (then in SbModel)
if (!nuisPdf) {
Info("StandardHypoTestDemo","No nuisance pdf given for the HybridCalculator - try to deduce pdf from the model");
if (bModel->GetPdf() && bModel->GetObservables() )
nuisPdf = RooStats::MakeNuisancePdf(*bModel,"nuisancePdf_bmodel");
else
nuisPdf = RooStats::MakeNuisancePdf(*sbModel,"nuisancePdf_sbmodel");
}
if (!nuisPdf ) {
if (bModel->GetPriorPdf()) {
nuisPdf = bModel->GetPriorPdf();
Info("StandardHypoTestDemo","No nuisance pdf given - try to use %s that is defined as a prior pdf in the B model",nuisPdf->GetName());
}
else {
Error("StandardHypoTestDemo","Cannnot run Hybrid calculator because no prior on the nuisance parameter is specified or can be derived");
return;
}
}
assert(nuisPdf);
Info("StandardHypoTestDemo","Using as nuisance Pdf ... " );
nuisPdf->Print();
const RooArgSet * nuisParams = (bModel->GetNuisanceParameters() ) ? bModel->GetNuisanceParameters() : sbModel->GetNuisanceParameters();
RooArgSet * np = nuisPdf->getObservables(*nuisParams);
if (np->getSize() == 0) {
Warning("StandardHypoTestDemo","Prior nuisance does not depend on nuisance parameters. They will be smeared in their full range");
}
delete np;
((HybridCalculator*)hypoCalc)->ForcePriorNuisanceAlt(*nuisPdf);
((HybridCalculator*)hypoCalc)->ForcePriorNuisanceNull(*nuisPdf);
}
// hypoCalc->ForcePriorNuisanceAlt(*sbModel->GetPriorPdf());
// hypoCalc->ForcePriorNuisanceNull(*bModel->GetPriorPdf());
ToyMCSampler * sampler = (ToyMCSampler *)hypoCalc->GetTestStatSampler();
if (sampler && (calcType == 0 || calcType == 1) ) {
// look if pdf is number counting or extended
if (sbModel->GetPdf()->canBeExtended() ) {
if (useNC) Warning("StandardHypoTestDemo","Pdf is extended: but number counting flag is set: ignore it ");
}
else {
// for not extended pdf
if (!useNC) {
int nEvents = data->numEntries();
Info("StandardHypoTestDemo","Pdf is not extended: number of events to generate taken from observed data set is %d",nEvents);
sampler->SetNEventsPerToy(nEvents);
}
else {
Info("StandardHypoTestDemo","using a number counting pdf");
sampler->SetNEventsPerToy(1);
}
}
if (data->isWeighted() && !generateBinned) {
Info("StandardHypoTestDemo","Data set is weighted, nentries = %d and sum of weights = %8.1f but toy generation is unbinned - it would be faster to set generateBinned to true\n",data->numEntries(), data->sumEntries());
}
if (generateBinned) sampler->SetGenerateBinned(generateBinned);
// set the test statistic
if (testStatType == 0) sampler->SetTestStatistic(slrts);
if (testStatType == 1) sampler->SetTestStatistic(ropl);
if (testStatType == 2 || testStatType == 3) sampler->SetTestStatistic(profll);
}
HypoTestResult * htr = hypoCalc->GetHypoTest();
htr->SetPValueIsRightTail(true);
htr->SetBackgroundAsAlt(false);
htr->Print(); // how to get meaningfull CLs at this point?
delete sampler;
delete slrts;
delete ropl;
delete profll;
if (calcType != 2) {
HypoTestPlot * plot = new HypoTestPlot(*htr,100);
plot->SetLogYaxis(true);
plot->Draw();
}
else {
std::cout << "Asymptotic results " << std::endl;
}
// look at expected significances
// found median of S+B distribution
if (calcType != 2) {
SamplingDistribution * altDist = htr->GetAltDistribution();
HypoTestResult htExp("Expected Result");
htExp.Append(htr);
// find quantiles in alt (S+B) distribution
double p[5];
double q[5];
for (int i = 0; i < 5; ++i) {
double sig = -2 + i;
p[i] = ROOT::Math::normal_cdf(sig,1);
}
std::vector<double> values = altDist->GetSamplingDistribution();
TMath::Quantiles( values.size(), 5, &values[0], q, p, false);
for (int i = 0; i < 5; ++i) {
htExp.SetTestStatisticData( q[i] );
double sig = -2 + i;
std::cout << " Expected p -value and significance at " << sig << " sigma = "
<< htExp.NullPValue() << " significance " << htExp.Significance() << " sigma " << std::endl;
}
}
else {
// case of asymptotic calculator
for (int i = 0; i < 5; ++i) {
double sig = -2 + i;
// sigma is inverted here
double pval = AsymptoticCalculator::GetExpectedPValues( htr->NullPValue(), htr->AlternatePValue(), -sig, false);
std::cout << " Expected p -value and significance at " << sig << " sigma = "
<< pval << " significance " << ROOT::Math::normal_quantile_c(pval,1) << " sigma " << std::endl;
}
}
}
