int
ImfHeaderSetBox2fAttribute (ImfHeader *hdr,
const char name[],
float xMin, float yMin,
float xMax, float yMax)
{
try
{
Box2f box (V2f (xMin, yMin), V2f (xMax, yMax));
if (header(hdr)->find(name) == header(hdr)->end())
{
header(hdr)->insert (name, Imf::Box2fAttribute (box));
}
else
{
header(hdr)->typedAttribute<Imf::Box2fAttribute>(name).value() =
box;
}
return 1;
}
catch (const std::exception &e)
{
setErrorMessage (e);
return 0;
}
}
void
ImfHeaderSetDataWindow (ImfHeader *hdr,
int xMin, int yMin,
int xMax, int yMax)
{
header(hdr)->dataWindow() = Box2i (V2i (xMin, yMin), V2i (xMax, yMax));
}
VonMisesFischerApprox::VonMisesFischerApprox(const float* data, int length):
kappas(), mus(), radiosities() {
int nLobes = (length-1)/7;
kappas.resize(nLobes,0.0f);
mus.resize(nLobes,V3f(0,0,0));
radiosities.resize(nLobes,C3f(0,0,0));
for (int i=0; i < nLobes; i++) {
kappas[i] = data[i*7+1];
mus[i] = V3f(data[(i*7+2)],data[(i*7+3)],data[(i*7+4)]);
radiosities[i] = C3f(data[(i*7+5)],data[(i*7+6)],data[(i*7+7)]);
}
}
PhongModelApprox::PhongModelApprox(const float* data, int length):
lobeDirs(), lobeCols() {
int nLobes = (length-5)/6;
phong = (int) data[1];
N = V3f(data[2],data[3],data[4]);
lobeDirs.resize(nLobes,V3f(0,0,0));
lobeCols.resize(nLobes,C3f(0,0,0));
for (int i=0; i < nLobes; i++) {
lobeDirs[i] = V3f(data[(i*6+5)],data[(i*6+6)],data[(i*6+7)]);
lobeCols[i] = C3f(data[(i*6+8)],data[(i*6+9)],data[(i*6+10)]);
}
}
float
Gamma::operator() (half h)
{
//
// Defog
//
float x = max (0.f, (h - d));
//
// Exposure
//
x *= m;
//
// Knee
//
if (x > kl)
x = kl + knee (x - kl, f);
//
// Gamma
//
x = Imath::Math<float>::pow (x, g);
//
// Scale and clamp
//
return clamp (x * s, 0.f, 255.f);
}
Header::Header (int width,
int height,
float pixelAspectRatio,
const V2f &screenWindowCenter,
float screenWindowWidth,
LineOrder lineOrder,
Compression compression)
:
_map()
{
staticInitialize();
Box2i displayWindow (V2i (0, 0), V2i (width - 1, height - 1));
initialize (*this,
displayWindow,
displayWindow,
pixelAspectRatio,
screenWindowCenter,
screenWindowWidth,
lineOrder,
compression);
}
void VonMisesFischerApprox::approximate(const Hemisphere& hemi) {
float kappa = hemi.getPhong();
V3f N = hemi.getNormal();
V3f* directions = hemi.getLobeDirections();
C3f* hemiRads = hemi.getLobeRadiosities();
for (int i=0; i <mus.size(); i++) {
if (i >= hemi.getNLobes()) {
float nan = std::numeric_limits<float>::quiet_NaN();
mus[i] = V3f(nan,nan,nan);
} else {
V3f L = directions[i];
V3f R = -L - 2 * (dot(-L, N)) * N;
mus[i] = R;
radiosities[i] = hemiRads[i]*dot(L,N);
kappas[i] = kappa;
}
}
}
void PhongModelApprox::approximate(const Hemisphere& hemi) {
N = hemi.getNormal();
phong = hemi.getPhong();
V3f* directions = hemi.getLobeDirections();
C3f* radiosities = hemi.getLobeRadiosities();
for (int i=0; i <lobeDirs.size(); i++) {
if (i >= hemi.getNLobes()) {
float nan = std::numeric_limits<float>::quiet_NaN();
lobeDirs[i] = V3f(nan,nan,nan);
} else {
V3f L = directions[i];
L = L/L.length();
V3f R = -L - 2 * (dot(-L, N)) * N;
lobeDirs[i] = R;
lobeCols[i] = radiosities[i]*dot(N,L);
}
}
}
VonMisesFischerApprox::VonMisesFischerApprox(int nLobes) :
kappas(nLobes,0), mus(nLobes,V3f(0,0,0)), radiosities(nLobes,C3f(0,0,0)) {
}
PhongModelApprox::PhongModelApprox(int nLobes) :
lobeDirs(nLobes,V3f(0,0,0)), lobeCols(nLobes,C3f(0,0,0)) {
}
static void renderNode(IntegratorT& integrator, V3f P, V3f N, float cosConeAngle,
float sinConeAngle, float maxSolidAngle, int dataSize,
const DiffusePointOctree::Node* node)
{
// This is an iterative traversal of the point hierarchy, since it's
// slightly faster than a recursive traversal.
//
// The max required size for the explicit stack should be < 200, since
// tree depth shouldn't be > 24, and we have a max of 8 children per node.
const DiffusePointOctree::Node* nodeStack[200];
nodeStack[0] = node;
int stackSize = 1;
while(stackSize > 0)
{
node = nodeStack[--stackSize];
{
// Examine node bound and cull if possible
// TODO: Reinvestigate using (node->aggP - P) with spherical harmonics
V3f c = node->center - P;
if(sphereOutsideCone(c, c.length2(), node->boundRadius, N,
cosConeAngle, sinConeAngle))
continue;
}
float r = node->aggR;
V3f p = node->aggP - P;
float plen2 = p.length2();
// Examine solid angle of interior node bounding sphere to see whether we
// can render it directly or not.
//
// TODO: Would be nice to use dot(node->aggN, p.normalized()) in the solid
// angle estimation. However, we get bad artifacts if we do this naively.
// Perhaps with spherical harmoics it'll be better.
float solidAngle = M_PI*r*r / plen2;
if(solidAngle < maxSolidAngle)
{
integrator.setPointData(reinterpret_cast<const float*>(&node->aggCol));
renderDisk(integrator, N, p, node->aggN, r, cosConeAngle, sinConeAngle);
}
else
{
// If we get here, the solid angle of the current node was too large
// so we must consider the children of the node.
//
// The render order is sorted so that points are rendered front to
// back. This greatly improves the correctness of the hider.
//
// FIXME: The sorting procedure gets things wrong sometimes! The
// problem is that points may stick outside the bounds of their octree
// nodes. Probably we need to record all the points, sort, and
// finally render them to get this right.
if(node->npoints != 0)
{
// Leaf node: simply render each child point.
std::pair<float, int> childOrder[8];
// INDIRECT
assert(node->npoints <= 8);
for(int i = 0; i < node->npoints; ++i)
{
const float* data = &node->data[i*dataSize];
V3f p = V3f(data[0], data[1], data[2]) - P;
childOrder[i].first = p.length2();
childOrder[i].second = i;
}
std::sort(childOrder, childOrder + node->npoints);
for(int i = 0; i < node->npoints; ++i)
{
const float* data = &node->data[childOrder[i].second*dataSize];
V3f p = V3f(data[0], data[1], data[2]) - P;
V3f n = V3f(data[3], data[4], data[5]);
float r = data[6];
integrator.setPointData(data+7);
renderDisk(integrator, N, p, n, r, cosConeAngle, sinConeAngle);
}
continue;
}
else
{
// Interior node: render children.
std::pair<float, const DiffusePointOctree::Node*> children[8];
int nchildren = 0;
for(int i = 0; i < 8; ++i)
{
DiffusePointOctree::Node* child = node->children[i];
if(!child)
continue;
children[nchildren].first = (child->center - P).length2();
children[nchildren].second = child;
++nchildren;
}
std::sort(children, children + nchildren);
// Interior node: render each non-null child. Nodes we want to
// render first must go onto the stack last.
for(int i = nchildren-1; i >= 0; --i)
nodeStack[stackSize++] = children[i].second;
}
}
}
}
void
ImfHeaderSetScreenWindowCenter (ImfHeader *hdr, float x, float y)
{
header(hdr)->screenWindowCenter() = V2f (x, y);
}
