Ejemplo n.º 1
0
void IppReportDlg::slotUser1()
{
	KPrinter	printer;
	printer.setFullPage(true);
	printer.setDocName(caption());
	if (printer.setup(this))
	{
		TQPainter	painter(&printer);
		TQPaintDeviceMetrics	metrics(&printer);

		// report is printed using TQSimpleRichText
		TQSimpleRichText	rich(m_edit->text(), font());
		rich.setWidth(&painter, metrics.width());
		int	margin = (int)(1.5 / 2.54 * metrics.logicalDpiY());	// 1.5 cm
		TQRect	r(margin, margin, metrics.width()-2*margin, metrics.height()-2*margin);
		int	hh = rich.height(), page(1);
		while (1)
		{
			rich.draw(&painter, margin, margin, r, colorGroup());
			TQString	s = caption() + ": " + TQString::number(page);
			TQRect	br = painter.fontMetrics().boundingRect(s);
			painter.drawText(r.right()-br.width()-5, r.top()-br.height()-4, br.width()+5, br.height()+4, Qt::AlignRight|Qt::AlignTop, s);
			r.moveBy(0, r.height()-10);
			painter.translate(0, -(r.height()-10));
			if (r.top() < hh)
			{
				printer.newPage();
				page++;
			}
			else
				break;
		}
	}
}
Ejemplo n.º 2
0
void KJotsEdit::print(TQString title)
{
    KPrinter printer;
    printer.setDocName(title);
    printer.setFullPage(false);
    printer.setCreator("KJots");

    if (printer.setup(this))
    {
        TQFont printFont = font();
        TQPainter painter( &printer );
        TQPaintDeviceMetrics metrics( &printer );
        int y = 0;
        int maxWidth = metrics.width();
        int maxHeight = metrics.height();
        TQString currentParagraph;

        for (int paragraphCount = 0; paragraphCount < paragraphs(); ++paragraphCount )
        {
            currentParagraph = text(paragraphCount);
            TQRect r = painter.boundingRect(0, y, maxWidth, maxHeight,
                    TQPainter::ExpandTabs | TQPainter::WordBreak,
                    currentParagraph);

            if ((y + r.height()) > maxHeight)
            {
                printer.newPage();
                y = 0;
            }

            painter.drawText(0, y, maxWidth, maxHeight - y,
                    TQPainter::ExpandTabs | TQPainter::WordBreak,
                    currentParagraph);
            y += r.height();
        }
        painter.end();
    }
}
Ejemplo n.º 3
0
void DetailledPrintStyle::print( const KABC::Addressee::List &contacts, PrintProgress *progress )
{
  mPrintProgress = progress;

  progress->addMessage( i18n( "Setting up fonts and colors" ) );
  progress->setProgress( 0 );

  bool useKDEFonts;
  QFont font;
  QColor foreColor = Qt::black;
  QColor headerColor = Qt::white;
  bool useHeaderColor = true;
  QColor backColor = Qt::black;
  bool useBGColor;

  // save, always available defaults:
  QFont header = QFont("Helvetica", 12, QFont::Normal);
  QFont headlines = QFont("Helvetica", 12, QFont::Normal, true);
  QFont body = QFont("Helvetica", 12, QFont::Normal);
  QFont fixed = QFont("Courier", 12, QFont::Normal);
  QFont comment = QFont("Helvetica", 10, QFont::Normal);

  // store the configuration settings:
  KConfig *config = kapp->config();
  config->setGroup( ConfigSectionName );
  useKDEFonts = mPageAppearance->cbStandardFonts->isChecked();
  config->writeEntry( UseKDEFonts, useKDEFonts );

  // read the font and color selections from the wizard pages:
  useBGColor=mPageAppearance->cbBackgroundColor->isChecked();
  config->writeEntry( ColoredContactHeaders, useBGColor );

  // use colored contact headers, otherwise use plain black and white):
  if ( useBGColor ) {
    headerColor = mPageAppearance->kcbHeaderTextColor->color();
    backColor = mPageAppearance->kcbHeaderBGColor->color();
    config->writeEntry( ContactHeaderForeColor, headerColor );
    config->writeEntry( ContactHeaderBGColor, backColor );
  }

  if ( mPageAppearance->cbStandardFonts->isChecked() ) {
    QFont standard = KGlobalSettings::generalFont();
    header = standard;
    headlines = standard;
    body = standard;
    fixed = KGlobalSettings::fixedFont();
    comment = standard;
  } else {
    header.setFamily( mPageAppearance->kfcHeaderFont->currentText() );
    header.setPointSize( mPageAppearance->kisbHeaderFontSize->value() );
    config->writeEntry( HeaderFont, header );

    // headlines:
    headlines.setFamily( mPageAppearance->kfcHeadlineFont->currentText() );
    headlines.setPointSize( mPageAppearance->kisbHeadlineFontSize->value() );
    config->writeEntry( HeadlinesFont, headlines );

    // body:
    body.setFamily( mPageAppearance->kfcBodyFont->currentText() );
    body.setPointSize( mPageAppearance->kisbBodyFontSize->value() );
    config->writeEntry( BodyFont, body );

    // details:
    comment.setFamily( mPageAppearance->kfcDetailsFont->currentText() );
    comment.setPointSize( mPageAppearance->kisbDetailsFontSize->value() );
    config->writeEntry( DetailsFont, comment );

    // fixed:
    fixed.setFamily( mPageAppearance->kfcFixedFont->currentText() );
    fixed.setPointSize( mPageAppearance->kisbFixedFontSize->value() );
    config->writeEntry( FixedFont, fixed );
  }

  mPainter = new KABEntryPainter;
  mPainter->setForegroundColor( foreColor );
  mPainter->setHeaderColor( headerColor );
  mPainter->setBackgroundColor( backColor );
  mPainter->setUseHeaderColor( useHeaderColor );
  mPainter->setHeaderFont( header );
  mPainter->setHeadLineFont( headlines );
  mPainter->setBodyFont( body );
  mPainter->setFixedFont( fixed );
  mPainter->setCommentFont( comment );

  KPrinter *printer = wizard()->printer();

  QPainter painter;
  progress->addMessage( i18n( "Setting up margins and spacing" ) );
  int marginTop = 0,
      marginLeft = 64, // to allow stapling, need refinement with two-side prints
      marginRight = 0,
      marginBottom = 0;

  register int left, top, width, height;

  painter.begin( printer );
  printer->setFullPage( true ); // use whole page

  QPaintDeviceMetrics metrics( printer );

  left = QMAX( printer->margins().width(), marginLeft );
  top = QMAX( printer->margins().height(), marginTop );
  width = metrics.width() - left - QMAX( printer->margins().width(), marginRight );
  height = metrics.height() - top - QMAX( printer->margins().height(), marginBottom );

  painter.setViewport( left, top, width, height );
  progress->addMessage( i18n( "Printing" ) );

  printEntries( contacts, printer, &painter,
                QRect( 0, 0, metrics.width(), metrics.height() ) );

  progress->addMessage( i18n( "Done" ) );
  painter.end();

  config->sync();
}
Ejemplo n.º 4
0
bool KexiSimplePrintingCommand::print(const QString& aTitleText)
{
	KexiDB::Connection *conn = m_mainWin->project()->dbConnection();
	KexiDB::TableOrQuerySchema tableOrQuery(conn, m_objectId);
	if (!tableOrQuery.table() && !tableOrQuery.query()) {
//! @todo item not found
		return false;
	}
	QString titleText(aTitleText.stripWhiteSpace());
	if (titleText.isEmpty())
		titleText = tableOrQuery.captionOrName();

	KexiSimplePrintingEngine engine(m_settings, this);
	QString errorMessage;
	if (!engine.init(*conn, tableOrQuery, titleText, errorMessage)) {
		if (!errorMessage.isEmpty())
			KMessageBox::sorry(m_mainWin, errorMessage, i18n("Printing"));
		return false;
	}

	//setup printing
#ifdef Q_WS_WIN
	QPrinter printer(QPrinter::HighResolution);
	printer.setOrientation( m_settings.pageLayout.orientation == PG_PORTRAIT 
		? QPrinter::Portrait : QPrinter::Landscape );
	printer.setPageSize( 
		(QPrinter::PageSize)KoPageFormat::printerPageSize( m_settings.pageLayout.format ) );

	// "chicken-egg" problem: 
	// we cannot use real from/to values in setMinMax() and setFromTo() 
	// because page count is known after obtaining print settings
	printer.setFromTo(1,1);
#else
	KPrinter printer;
	printer.setOrientation( m_settings.pageLayout.orientation == PG_PORTRAIT 
		? KPrinter::Portrait : KPrinter::Landscape );
	printer.setPageSize( 
		(KPrinter::PageSize)KoPageFormat::printerPageSize( m_settings.pageLayout.format ) );
#endif

	printer.setFullPage(true);
	QString docName( titleText );
	printer.setDocName( docName );
	printer.setCreator(KEXI_APP_NAME);
	if ( !printer.setup( m_mainWin ) ) {
		return true;
	}

	// now we have final settings

//! @todo get printer.pageOrder() (for reversed order requires improved engine)
	QPainter painter;

	if (!painter.begin(&printer)) {
//! @todo msg
		return false;
	}
	engine.calculatePagesCount(painter);

	uint loops, loopsPerPage;
	QValueList<int> pagesToPrint;
	int fromPage = 0;
#ifdef Q_WS_WIN
	int toPage = 0;
	if (QPrinter::PageRange == printer.printRange()) {
		fromPage = printer.fromPage();
		toPage = printer.toPage();
	}
	if (fromPage==0 || toPage==0) {
		fromPage = 0;
		toPage = (int)engine.pagesCount()-1;
	}
	else {
		fromPage--;
		if (toPage > (int)engine.pagesCount())
			toPage = (int)engine.pagesCount();
		toPage--;
	}
	// win32 only supports one range, build the list
	for (int i = fromPage; i<=toPage; i++) {
		pagesToPrint.append(i);
	}
	// on win32 the OS does perform buffering (only when collation is off, each copy needs to be repeated)
	loops = 1;
	loopsPerPage = printer.collateCopies() ? 1 : printer.numCopies();
#else
	// on !win32 print QPrinter::numCopies() times (the OS does not perform buffering)
	pagesToPrint = printer.pageList();
	kdDebug() << pagesToPrint << endl;
	if (pagesToPrint.isEmpty()) {
		fromPage = 0;
		for (int i = 0; i<(int)engine.pagesCount(); i++) {
			pagesToPrint.append(i);
		}
	}
	else
		fromPage = pagesToPrint.first();
	if (printer.collate()==KPrinter::Collate) {
		//collation: p1, p2,..pn; p1, p2,..pn; ......; p1, p2,..pn
		loops = printer.numCopies();
		loopsPerPage = 1;
	}
	else {
		//no collation: p1, p1, ..., p1; p2, p2, ..., p2; ......; pn, pn,..pn
		loops = 1; 
		loopsPerPage = printer.numCopies();
	}
//! @todo also look at printer.pageSet() option : all/odd/even pages
#endif
	// now, total number of printed pages is printer.numCopies()*printer.pageList().count()

	kdDebug() << "printing..." << endl;
	bool firstPage = true;
	for (uint copy = 0;copy < loops; copy++) {
		kdDebug() << "copy " << (copy+1) << " of " << loops << endl;
		uint pageNumber = fromPage;
		QValueList<int>::ConstIterator pagesIt = pagesToPrint.constBegin();
		for(;(int)pageNumber == fromPage || !engine.eof(); ++pageNumber) {
			kdDebug() << "printing..." << endl;
			if (pagesIt == pagesToPrint.constEnd()) //no more pages to print
				break;
			if ((int)pageNumber < *pagesIt) { //skip pages without printing (needed for computation)
				engine.paintPage(pageNumber, painter, false);
				continue;
			}
			if (*pagesIt < (int)pageNumber) { //sanity
				++pagesIt;
				continue;
			}
			for (uint onePageCounter = 0; onePageCounter < loopsPerPage; onePageCounter++) {
				if (!firstPage)
					printer.newPage();
				else
					firstPage = false;
				kdDebug() << "page #" << pageNumber << endl;
				engine.paintPage(pageNumber, painter);
			}
			++pagesIt;
		}
	}
	kdDebug() << "end of printing." << endl;

	// stop painting, this will automatically send the print data to the printer
	if (!painter.end())
		return false;

	if (!engine.done())
		return false;

	return true;
}