void KisProjectionTest::testDirty()
{
KisImageSP image = new KisImage(0, 1000, 1000, 0, "layer tests");
// Two layers so the single-layer-is-rootlayer optimization doesn't kick in
KisLayerSP layer = new KisPaintLayer(image, "layer 1", OPACITY_OPAQUE_U8);
KisLayerSP layer2 = new KisPaintLayer(image, "layer 2", OPACITY_OPAQUE_U8);
image->addNode(layer);
image->addNode(layer2);
KisFillPainter gc(layer2->paintDevice());
KoColor c(Qt::red, layer2->colorSpace());
gc.fillRect(0, 0, 1000, 1000, c);
gc.end();
layer2->setDirty(gc.takeDirtyRegion());
// wait a little for the projection to finish
QTest::qSleep(250);
// Check that the projection is totally redistribute
KisSequentialConstIterator it(image->projection(), QRect(0, 0, 1000, 1000));
do {
QColor c;
image->colorSpace()->toQColor(it.oldRawData(), &c, image->profile());
QVERIFY(c == Qt::red);
} while (it.nextPixel());
}
KoFilter::ConversionStatus MagickExport::convert(const QCString& from, const QCString& to)
{
kdDebug(41008) << "magick export! From: " << from << ", To: " << to << "\n";
if (from != "application/x-krita")
return KoFilter::NotImplemented;
// XXX: Add dialog about flattening layers here
KisDoc *output = dynamic_cast<KisDoc*>(m_chain->inputDocument());
QString filename = m_chain->outputFile();
if (!output)
return KoFilter::CreationError;
if (filename.isEmpty()) return KoFilter::FileNotFound;
KURL url;
url.setPath(filename);
KisImageSP img = output->currentImage();
KisImageMagickConverter ib(output, output->undoAdapter());
KisPaintDeviceSP pd = new KisPaintDevice(*img->projection());
KisPaintLayerSP l = new KisPaintLayer(img, "projection", OPACITY_OPAQUE, pd);
vKisAnnotationSP_it beginIt = img->beginAnnotations();
vKisAnnotationSP_it endIt = img->endAnnotations();
if (ib.buildFile(url, l, beginIt, endIt) == KisImageBuilder_RESULT_OK) {
return KoFilter::OK;
}
return KoFilter::InternalError;
}
void KisTransparencyMaskTest::testMoveParentLayer()
{
KisImageSP image;
KisPaintLayerSP layer;
KisPaintDeviceSP dev;
KisTransparencyMaskSP mask;
initImage(image, layer, dev, mask);
mask->initSelection(layer);
mask->selection()->pixelSelection()->invert();
mask->select(QRect(50, 50, 100, 100));
KisFullRefreshWalker walker(image->bounds());
KisAsyncMerger merger;
walker.collectRects(layer, image->bounds());
merger.startMerge(walker);
// image->projection()->convertToQImage(0, 0,0,300,300).save("proj_before.png");
QRect initialRect(0,0,200,100);
QCOMPARE(layer->exactBounds(), initialRect);
QCOMPARE(image->projection()->exactBounds(), QRect(50,50,100,50));
layer->setX(100);
layer->setY(100);
dbgKrita << "Sel. rect before:" << mask->selection()->selectedExactRect();
mask->setX(100);
mask->setY(100);
dbgKrita << "Sel. rect after:" << mask->selection()->selectedExactRect();
QRect finalRect(100,100,200,100);
QCOMPARE(layer->exactBounds(), finalRect);
walker.collectRects(layer, initialRect | finalRect);
merger.startMerge(walker);
// image->projection()->convertToQImage(0, 0,0,300,300).save("proj_after.png");
QCOMPARE(image->projection()->exactBounds(), QRect(150,150,100,50));
}
QImage utils::StrokeTester::doStroke(bool cancelled,
bool indirectPainting,
bool externalLayer,
bool testUpdates,
bool needQImage)
{
KisImageSP image = utils::createImage(0, m_imageSize);
KoCanvasResourceManager *manager = utils::createResourceManager(image, 0, m_presetFilename);
KisNodeSP currentNode;
for (int i = 0; i < m_numIterations; i++) {
modifyResourceManager(manager, image, i);
KisPainter *painter = new KisPainter();
KisResourcesSnapshotSP resources =
new KisResourcesSnapshot(image,
image->rootLayer()->firstChild(),
image->postExecutionUndoAdapter(),
manager);
if(externalLayer) {
KisNodeSP externalNode = new KisPaintLayer(0, "extlyr", OPACITY_OPAQUE_U8, image->colorSpace());
resources->setCurrentNode(externalNode);
Q_ASSERT(resources->currentNode() == externalNode);
}
initImage(image, resources->currentNode(), i);
KisStrokeStrategy *stroke = createStroke(indirectPainting, resources, painter, image);
m_strokeId = image->startStroke(stroke);
addPaintingJobs(image, resources, painter, i);
if(!cancelled) {
image->endStroke(m_strokeId);
}
else {
image->cancelStroke(m_strokeId);
}
image->waitForDone();
currentNode = resources->currentNode();
}
QImage resultImage;
if(needQImage) {
KisPaintDeviceSP device = testUpdates ?
image->projection() :
currentNode->paintDevice();
resultImage = device->convertToQImage(0, 0, 0, image->width(), image->height());
}
image = 0;
delete manager;
return resultImage;
}
void KisAsyncMergerTest::testSubgraphingWithoutUpdatingParent()
{
const KoColorSpace *colorSpace = KoColorSpaceRegistry::instance()->rgb8();
KisImageSP image = new KisImage(0, 128, 128, colorSpace, "clones test");
KisPaintDeviceSP device1 = new KisPaintDevice(colorSpace);
device1->fill(image->bounds(), KoColor(Qt::white, colorSpace));
KisLayerSP paintLayer1 = new KisPaintLayer(image, "paint1", OPACITY_OPAQUE_U8, device1);
KisPaintDeviceSP device2 = new KisPaintDevice(colorSpace);
device2->fill(image->bounds(), KoColor(Qt::black, colorSpace));
KisLayerSP paintLayer2 = new KisPaintLayer(image, "paint2", 128, device2);
image->addNode(paintLayer1, image->rootLayer());
image->addNode(paintLayer2, image->rootLayer());
image->initialRefreshGraph();
QImage refImage(QString(FILES_DATA_DIR) + QDir::separator() + "subgraphing_without_updating.png");
{
QImage resultImage = image->projection()->convertToQImage(0);
QCOMPARE(resultImage, refImage);
}
QRect cropRect(image->bounds());
KisRefreshSubtreeWalker walker(cropRect);
KisAsyncMerger merger;
walker.collectRects(paintLayer2, image->bounds());
merger.startMerge(walker);
{
QImage resultImage = image->projection()->convertToQImage(0);
QCOMPARE(resultImage, refImage);
}
}
bool doPartialTests(const QString &prefix, KisImageSP image, KisLayerSP paintLayer,
KisLayerSP visibilityToggleLayer, KisTransformMaskSP mask)
{
TestUtil::ExternalImageChecker chk(prefix, "transform_mask_updates");
bool result = true;
QRect refRect = image->bounds();
int testIndex = 1;
QString testName;
for (int y = 0; y < refRect.height(); y += 512) {
for (int x = 0; x < refRect.width(); x += 512) {
QRect rc(x, y, 512, 512);
if (rc.right() > refRect.right()) {
rc.setRight(refRect.right());
if (rc.isEmpty()) continue;
}
if (rc.bottom() > refRect.bottom()) {
rc.setBottom(refRect.bottom());
if (rc.isEmpty()) continue;
}
paintLayer->setDirty(rc);
image->waitForDone();
testName = QString("tm_%1_partial_%2_%3").arg(testIndex++).arg(x).arg(y);
result &= chk.checkImage(image, testName);
}
}
// initial update of the mask to clear the unused portions of the projection
// (it updates only when we call set dirty on the mask itself, which happens
// in Krita right after the addition of the mask onto a layer)
mask->setDirty();
image->waitForDone();
testName = QString("tm_%1_initial_mask_visible_on").arg(testIndex++);
result &= chk.checkImage(image, testName);
// start layer visibility testing
paintLayer->setVisible(false);
paintLayer->setDirty();
image->waitForDone();
testName = QString("tm_%1_layer_visible_off").arg(testIndex++);
result &= chk.checkImage(image, testName);
paintLayer->setVisible(true);
paintLayer->setDirty();
image->waitForDone();
testName = QString("tm_%1_layer_visible_on").arg(testIndex++);
result &= chk.checkImage(image, testName);
if (paintLayer != visibilityToggleLayer) {
visibilityToggleLayer->setVisible(false);
visibilityToggleLayer->setDirty();
image->waitForDone();
testName = QString("tm_%1_extra_layer_visible_off").arg(testIndex++);
result &= chk.checkImage(image, testName);
visibilityToggleLayer->setVisible(true);
visibilityToggleLayer->setDirty();
image->waitForDone();
testName = QString("tm_%1_extra_layer_visible_on").arg(testIndex++);
result &= chk.checkImage(image, testName);
}
// toggle mask visibility
mask->setVisible(false);
mask->setDirty();
image->waitForDone();
testName = QString("tm_%1_mask_visible_off").arg(testIndex++);
result &= chk.checkImage(image, testName);
mask->setVisible(true);
mask->setDirty();
image->waitForDone();
testName = QString("tm_%1_mask_visible_on").arg(testIndex++);
result &= chk.checkImage(image, testName);
// entire bounds update
// no clearing, just don't hang up
paintLayer->setDirty(refRect);
image->waitForDone();
testName = QString("tm_%1_layer_dirty_bounds").arg(testIndex++);
result &= chk.checkImage(image, testName);
// no clearing, just don't hang up
mask->setDirty(refRect);
image->waitForDone();
testName = QString("tm_%1_mask_dirty_bounds").arg(testIndex++);
result &= chk.checkImage(image, testName);
if (paintLayer != visibilityToggleLayer) {
// no clearing, just don't hang up
visibilityToggleLayer->setDirty(refRect);
image->waitForDone();
testName = QString("tm_%1_extra_layer_dirty_bounds").arg(testIndex++);
result &= chk.checkImage(image, testName);
}
QRect fillRect;
// partial updates outside
fillRect = QRect(-100, 0.5 * refRect.height(), 50, 100);
paintLayer->paintDevice()->fill(fillRect, KoColor(Qt::red, image->colorSpace()));
paintLayer->setDirty(fillRect);
image->waitForDone();
testName = QString("tm_%1_layer_dirty_outside_%2_%3").arg(testIndex++).arg(fillRect.x()).arg(fillRect.y());
result &= chk.checkImage(image, testName);
fillRect = QRect(0.5 * refRect.width(), -100, 100, 50);
paintLayer->paintDevice()->fill(fillRect, KoColor(Qt::red, image->colorSpace()));
paintLayer->setDirty(fillRect);
image->waitForDone();
testName = QString("tm_%1_layer_dirty_outside_%2_%3").arg(testIndex++).arg(fillRect.x()).arg(fillRect.y());
result &= chk.checkImage(image, testName);
fillRect = QRect(refRect.width() + 50, 0.2 * refRect.height(), 50, 100);
paintLayer->paintDevice()->fill(fillRect, KoColor(Qt::red, image->colorSpace()));
paintLayer->setDirty(fillRect);
image->waitForDone();
testName = QString("tm_%1_layer_dirty_outside_%2_%3").arg(testIndex++).arg(fillRect.x()).arg(fillRect.y());
result &= chk.checkImage(image, testName);
// partial update inside
fillRect = QRect(0.5 * refRect.width() - 50, 0.5 * refRect.height() - 50, 100, 100);
paintLayer->paintDevice()->fill(fillRect, KoColor(Qt::red, image->colorSpace()));
paintLayer->setDirty(fillRect);
image->waitForDone();
testName = QString("tm_%1_layer_dirty_inside_%2_%3").arg(testIndex++).arg(fillRect.x()).arg(fillRect.y());
result &= chk.checkImage(image, testName);
// clear explicitly
image->projection()->clear();
mask->setDirty();
image->waitForDone();
testName = QString("tm_%1_mask_dirty_bounds").arg(testIndex++);
result &= chk.checkImage(image, testName);
KisDumbTransformMaskParams *params =
dynamic_cast<KisDumbTransformMaskParams*>(mask->transformParams().data());
QTransform t = params->testingGetTransform();
t *= QTransform::fromTranslate(400, 300);
params->testingSetTransform(t);
mask->setTransformParams(mask->transformParams());
mask->setDirty();
image->waitForDone();
testName = QString("tm_%1_mask_dirty_after_offset").arg(testIndex++);
result &= chk.checkImage(image, testName);
return result;
}
