Ejemplo n.º 1
0
void KisClipboardTest::testRoundTrip()
{
    const KoColorSpace *cs = KoColorSpaceRegistry::instance()->rgb8();
    KisPaintDeviceSP dev = new KisPaintDevice(cs);
    KisPaintDeviceSP newDev;
    QPoint errorPoint;

    QRect fillRect(10,10,20,20);
    KoColor pixel(Qt::red, cs);
    dev->fill(fillRect.x(),fillRect.y(),
              fillRect.width(), fillRect.height(), pixel.data());

    QCOMPARE(dev->exactBounds(), fillRect);
    KisClipboard::instance()->setClip(dev, QPoint());
    newDev = KisClipboard::instance()->clip(QPoint());
    QCOMPARE(newDev->exactBounds().size(), fillRect.size());
    newDev->setX(dev->x());
    newDev->setY(dev->y());
    QVERIFY(TestUtil::comparePaintDevices(errorPoint, dev, newDev));

    QPoint offset(100,100);
    dev->setX(offset.x());
    dev->setY(offset.y());

    QCOMPARE(dev->exactBounds(), fillRect.translated(offset));
    KisClipboard::instance()->setClip(dev, QPoint());
    newDev = KisClipboard::instance()->clip(QPoint());
    QCOMPARE(newDev->exactBounds().size(), fillRect.translated(offset).size());
    newDev->setX(dev->x());
    newDev->setY(dev->y());
    QVERIFY(TestUtil::comparePaintDevices(errorPoint, dev, newDev));
}
Ejemplo n.º 2
0
void MoveSelectionStrokeStrategy::doStrokeCallback(KisStrokeJobData *data)
{
    MoveStrokeStrategy::Data *d = dynamic_cast<MoveStrokeStrategy::Data*>(data);

    if (d) {
        KisIndirectPaintingSupport *indirect =
            static_cast<KisIndirectPaintingSupport*>(m_paintLayer.data());

        KisPaintDeviceSP movedDevice = indirect->temporaryTarget();

        QRegion dirtyRegion = movedDevice->region();

        QPoint currentDeviceOffset(movedDevice->x(), movedDevice->y());
        QPoint newDeviceOffset(m_initialDeviceOffset + d->offset);

        dirtyRegion |= dirtyRegion.translated(newDeviceOffset - currentDeviceOffset);

        movedDevice->setX(newDeviceOffset.x());
        movedDevice->setY(newDeviceOffset.y());
        m_finalOffset = d->offset;

        m_paintLayer->setDirty(dirtyRegion);
    } else {
        KisStrokeStrategyUndoCommandBased::doStrokeCallback(data);
    }
}
Ejemplo n.º 3
0
KisPaintDeviceSP KisShearVisitor::yShear(KisPaintDeviceSP src, qreal shearY, KoUpdater *progress)
{
    int start = progress->progress();

    KisPaintDeviceSP dst = KisPaintDeviceSP(new KisPaintDevice(src->colorSpace()));
    KoMixColorsOp * mixOp = src->colorSpace()->mixColorsOp();

    dst->setX(src->x());
    dst->setY(src->y());

    QRect r = src->exactBounds();

    qreal displacement;
    qint32 displacementInt;
    qreal weight;

    for (qint32 x = r.left(); x <= r.right(); x++) {

        //calculate displacement
        displacement = x * shearY;

        displacementInt = (qint32)(floor(displacement));
        weight = displacement - displacementInt;

        qint16 pixelWeights[2];

        pixelWeights[0] = static_cast<quint8>(weight * 255 + 0.5);
        pixelWeights[1] = 255 - pixelWeights[0];

        KisVLineConstIteratorPixel srcIt = src->createVLineIterator(x, r.y(), r.height() + 1);
        KisVLineIteratorPixel leftSrcIt = src->createVLineIterator(x, r.y() - 1, r.height() + 1);
        KisVLineIteratorPixel dstIt = dst->createVLineIterator(x, r.y() + displacementInt, r.height() + 1);

        while (!srcIt.isDone()) {

            const quint8 *pixelPtrs[2];

            pixelPtrs[0] = leftSrcIt.rawData();
            pixelPtrs[1] = srcIt.rawData();

            mixOp->mixColors(pixelPtrs, pixelWeights, 2, dstIt.rawData());

            ++srcIt;
            ++leftSrcIt;
            ++dstIt;
        }
        progress->setProgress(start + x);
    }
    return dst;
}
Ejemplo n.º 4
0
KisPaintDeviceSP KisShearVisitor::xShear(KisPaintDeviceSP src, qreal shearX, KoUpdater *progress)
{
    KisPaintDeviceSP dst = KisPaintDeviceSP(new KisPaintDevice(src->colorSpace()));
    dst->setX(src->x());
    dst->setY(src->y());

    QRect r = src->exactBounds();

    qreal displacement;
    qint32 displacementInt;
    qreal weight;

    KoMixColorsOp * mixOp = src->colorSpace()->mixColorsOp();

    for (qint32 y = r.top(); y <= r.bottom(); y++) {

        //calculate displacement
        displacement = -y * shearX;

        displacementInt = (qint32)(floor(displacement));
        weight = displacement - displacementInt;

        qint16 pixelWeights[2];

        pixelWeights[0] = static_cast<quint8>(weight * 255 + 0.5);
        pixelWeights[1] = 255 - pixelWeights[0];

        KisHLineConstIteratorPixel srcIt = src->createHLineIterator(r.x(), y, r.width() + 1);
        KisHLineConstIteratorPixel leftSrcIt = src->createHLineIterator(r.x() - 1, y, r.width() + 1);
        KisHLineIteratorPixel dstIt = dst->createHLineIterator(r.x() + displacementInt, y, r.width() + 1);

        while (!srcIt.isDone()) {

            const quint8 *pixelPtrs[2];

            pixelPtrs[0] = leftSrcIt.rawData();
            pixelPtrs[1] = srcIt.rawData();

            mixOp->mixColors(pixelPtrs, pixelWeights, 2, dstIt.rawData());

            ++srcIt;
            ++leftSrcIt;
            ++dstIt;
        }
        progress->setProgress(y);

    }
    return dst;
}
Ejemplo n.º 5
0
void KisPaintDeviceTest::testTranslate()
{
    QRect fillRect(0,0,64,64);
    quint8 fillPixel[4]={255,255,255,255};

    const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
    KisPaintDeviceSP device = new KisPaintDevice(cs);

    device->fill(fillRect.left(), fillRect.top(),
                 fillRect.width(), fillRect.height(),fillPixel);

    device->setX(-10);
    device->setY(10);
    QCOMPARE(device->exactBounds(), QRect(-10,10,64,64));
    QCOMPARE(device->extent(), QRect(-10,10,64,64));
}
void KisPasteActionFactory::run(KisView2 *view)
{
    KisImageWSP image = view->image();

    //figure out where to position the clip
    // XXX: Fix this for internal points & zoom! (BSAR)
    QWidget * w = view->canvas();
    QPoint center = QPoint(w->width() / 2, w->height() / 2);
    QPoint bottomright = QPoint(w->width(), w->height());
    if (bottomright.x() > image->width())
        center.setX(image->width() / 2);
    if (bottomright.y() > image->height())
        center.setY(image->height() / 2);

    const KoCanvasBase* canvasBase = view->canvasBase();
    const KoViewConverter* viewConverter = view->canvasBase()->viewConverter();

    KisPaintDeviceSP clip = KisClipboard::instance()->clip(
        QPoint(
            viewConverter->viewToDocumentX(canvasBase->canvasController()->canvasOffsetX()) + center.x(),
            viewConverter->viewToDocumentY(canvasBase->canvasController()->canvasOffsetY()) + center.y()));

    if (clip) {
        // Pasted layer content could be outside image bounds and invisible, if that is the case move content into the bounds
        QRect exactBounds = clip->exactBounds();
        if (!exactBounds.isEmpty() && !exactBounds.intersects(image->bounds())) {
            clip->setX(clip->x() - exactBounds.x());
            clip->setY(clip->y() - exactBounds.y());
        }

        KisPaintLayer *newLayer = new KisPaintLayer(image.data(), image->nextLayerName() + i18n("(pasted)"), OPACITY_OPAQUE_U8, clip);
        KisNodeSP aboveNode = view->activeLayer();
        KisNodeSP parentNode = aboveNode ? aboveNode->parent() : image->root();

        KUndo2Command *cmd = new KisImageLayerAddCommand(image, newLayer, parentNode, aboveNode);
        KisProcessingApplicator *ap = beginAction(view, cmd->text());
        ap->applyCommand(cmd, KisStrokeJobData::SEQUENTIAL, KisStrokeJobData::NORMAL);
        endAction(ap, KisOperationConfiguration(id()).toXML());
    } else {
#ifdef __GNUC__
#warning "Add saving of XML data for Paste of shapes"
#endif

        view->canvasBase()->toolProxy()->paste();
    }
}
Ejemplo n.º 7
0
void KisPaintDeviceTest::testThumbnailDeviceWithOffset()
{
    QImage image(QString(FILES_DATA_DIR) + QDir::separator() + "hakonepa.png");
    const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
    KisPaintDeviceSP dev = new KisPaintDevice(cs);
    dev->convertFromQImage(image, 0);
    dev->setX(10);
    dev->setY(10);

    QImage thumb = dev->createThumbnail(640,441,QRect(10,10,640,441));

    image.save("oring.png");
    thumb.save("thumb.png");

    QPoint pt;
    QVERIFY(TestUtil::compareQImages(pt, thumb, image));
}
Ejemplo n.º 8
0
void KisPaintDeviceTest::testSharedDataManager()
{
    QRect fillRect(0,0,100,100);
    quint8 fillPixel[4]={255,255,255,255};
    QRect clearRect(10,10,20,20);
    QImage srcImage;
    QImage dstImage;

    const KoColorSpace *cs = KoColorSpaceRegistry::instance()->rgb8();
    KisPaintDeviceSP srcDevice = new KisPaintDevice(cs);

    srcDevice->setX(10);
    srcDevice->setY(20);

    srcDevice->fill(fillRect.left(), fillRect.top(),
                 fillRect.width(), fillRect.height(),fillPixel);

    KisPaintDeviceSP dstDevice = new KisPaintDevice(srcDevice->dataManager(), srcDevice);


    QVERIFY(srcDevice->extent() == dstDevice->extent());
    QVERIFY(srcDevice->exactBounds() == dstDevice->exactBounds());
    QVERIFY(srcDevice->defaultBounds() == dstDevice->defaultBounds());
    QVERIFY(srcDevice->x() == dstDevice->x());
    QVERIFY(srcDevice->y() == dstDevice->y());

    srcImage = srcDevice->convertToQImage(0);
    dstImage = dstDevice->convertToQImage(0);
    QVERIFY(srcImage == dstImage);

    srcDevice->clear(clearRect);

    srcImage = srcDevice->convertToQImage(0);
    dstImage = dstDevice->convertToQImage(0);
    QVERIFY(srcImage == dstImage);
}