void
CMakePlugin::OnExportMakefile(clBuildEvent& event)
{
const wxString project = event.GetProjectName();
const wxString config = event.GetConfigurationName();
// Get settings
const CMakeProjectSettings* settings = GetSettingsManager()->GetProjectSettings(project, config);
// Doesn't exists or not enabled
if (!settings || !settings->enabled) {
// Unable to export makefile
event.Skip();
return;
}
// Get project directory - this is directory where the makefile is stored
const wxFileName projectDir = GetProjectDirectory(project);
// Targets forward inspired by
// https://gist.github.com/doitian/4978329
// Content of the generated makefile
wxString content = wxString() <<
"# Generated by CMakePlugin\n"
".PHONY: all clean $(MAKECMDGOALS)\n"
"\n"
;
// Parent project is set
if (!settings->parentProject.IsEmpty()) {
// Configure parent project instead
const wxString& parentProject = settings->parentProject;
settings = GetSettingsManager()->GetProjectSettings(parentProject, config);
// Parent project not found
if (!settings || !settings->enabled) {
CL_ERROR("Unable to find or not enabled parent project "
"'" + parentProject + "' for project '" + project + "'");
return;
}
// Get parent project directory
wxFileName parentProjectDir = GetProjectDirectory(parentProject);
parentProjectDir.MakeRelativeTo(projectDir.GetFullPath());
// Path is relative so UNIX path system can be used
const wxString parentProjectDirEsc = parentProjectDir.GetPath(wxPATH_NO_SEPARATOR, wxPATH_UNIX);
// Redirect make to the parent project
content <<
"# Parent project\n"
"PARENT := " << parentProjectDirEsc << "\n"
"PARENT_MAKEFILE := " << parentProject << ".mk\n"
"\n"
"all:\n"
"\t$(MAKE) -C \"$(PARENT)\" -f \"$(PARENT_MAKEFILE)\" " << project << "\n"
"\n"
"clean:\n"
"\t$(MAKE) -C \"$(PARENT)\" -f \"$(PARENT_MAKEFILE)\" " << project << " clean\n"
"\n"
;
} else {
// Macro expander
// FIXME use IMacroManager (unable to find it yet)
MacroManager* macro = MacroManager::Instance();
wxASSERT(macro);
// Get variables
// Expand variables for final project
const wxString cmake = GetConfiguration()->GetProgramPath();
wxFileName sourceDir = wxFileName::DirName(macro->Expand(settings->sourceDirectory, GetManager(), project, config));
wxFileName buildDir = wxFileName::DirName(macro->Expand(settings->buildDirectory, GetManager(), project, config));
// Source dir must be relative to build directory (here is cmake called)
sourceDir.MakeRelativeTo(buildDir.GetFullPath());
// Build dir must be relative to project directory
buildDir.MakeRelativeTo(projectDir.GetFullPath());
// Relative paths
const wxString sourceDirEsc = sourceDir.GetPath(wxPATH_NO_SEPARATOR, wxPATH_UNIX);
const wxString buildDirEsc = buildDir.GetPath(wxPATH_NO_SEPARATOR, wxPATH_UNIX);
// Generated makefile
content <<
"CMAKE := \"" << cmake << "\"\n"
"BUILD_DIR := " << buildDirEsc << "\n"
"SOURCE_DIR := " << sourceDirEsc << "\n"
"CMAKE_ARGS := " << CreateArguments(*settings, *m_configuration.get()) << "\n"
"\n"
"# Building project(s)\n"
"$(or $(lastword $(MAKECMDGOALS)), all): $(BUILD_DIR)/Makefile\n"
"\t$(MAKE) -C \"$(BUILD_DIR)\" $(MAKECMDGOALS)\n"
"\n"
"# Building directory\n"
"$(BUILD_DIR):\n"
"\t$(CMAKE) -E make_directory \"$(BUILD_DIR)\"\n"
"\n"
"# Rule that detects if cmake is called\n"
"$(BUILD_DIR)/Makefile: .cmake_dirty | $(BUILD_DIR)\n"
"\tcd \"$(BUILD_DIR)\" && $(CMAKE) $(CMAKE_ARGS) \"$(SOURCE_DIR)\"\n"
"\n"
"# This rule / file allows force cmake run\n"
".cmake_dirty:\n"
"\t@echo '' > .cmake_dirty\n"
"\n"
;
}
// Path to makefile - called project directory required
wxFileName makefile = projectDir;
makefile.SetName(project);
makefile.SetExt("mk");
// Read old content from disk
wxString oldContent;
bool ok = ReadFileWithConversion(makefile.GetFullPath(), oldContent);
// Write only if there are some changes
if (!ok || content != oldContent) {
// Write make file content
wxFile file(makefile.GetFullPath(), wxFile::write);
if (!file.Write(content)) {
CL_ERROR("Unable to write custom makefile (CMakePlugin): " + makefile.GetFullPath());
}
}
}
void CallGraph::OnShowCallGraph(wxCommandEvent& event)
{
// myLog("wxThread::IsMain(%d)", (int)wxThread::IsMain());
IConfigTool* config_tool = m_mgr->GetConfigTool();
MacroManager* macro = MacroManager::Instance();
wxASSERT(macro);
config_tool->ReadObject(wxT("CallGraph"), &confData);
if(!wxFileExists(GetGprofPath()) || !wxFileExists(GetDotPath()))
return MessageBox(_T("Failed to locate required tools (gprof, dot). Please check the plugin settings."),
wxICON_ERROR);
clCxxWorkspace* ws = m_mgr->GetWorkspace();
if(!ws) return MessageBox(_("Unable to get opened workspace."), wxICON_ERROR);
wxFileName ws_cfn = ws->GetWorkspaceFileName();
wxString projectName = ws->GetActiveProjectName();
wxString errMsg;
ProjectPtr proj = ws->FindProjectByName( projectName, errMsg );
wxString projPath = proj->GetProjectPath();
BuildMatrixPtr mtx = ws->GetBuildMatrix();
if(!mtx) return MessageBox(_("Unable to get current build matrix."), wxICON_ERROR);
wxString build_config_name = mtx->GetSelectedConfigurationName();
BuildConfigPtr bldConf = ws->GetProjBuildConf(projectName, build_config_name);
if(!bldConf) return MessageBox(_("Unable to get opened workspace."), wxICON_ERROR);
wxString projOutputFn = macro->Expand( bldConf->GetOutputFileName(), m_mgr, projectName, build_config_name );
#ifdef __WXMSW__
if( ! projOutputFn.Lower().EndsWith( wxT(".exe") ) ) projOutputFn += wxT(".exe");
#endif //__WXMSW__
// myLog("WorkspaceFileName = \"%s\"", ws_cfn.GetFullPath());
// myLog("projectName \"%s\"", projectName);
// myLog("build_config_name = \"%s\"", build_config_name);
// myLog("projOutputFn = \"%s\"", projOutputFn);
// myLog("projPath = \"%s\"", projPath);
wxFileName cfn(projPath + wxFileName::GetPathSeparator() + projOutputFn);
cfn.Normalize();
// base path
const wxString base_path = ws_cfn.GetPath();
// check source binary exists
wxString bin_fpath = cfn.GetFullPath();
if(!cfn.Exists()) {
bin_fpath = wxFileSelector("Please select the binary to analyze", base_path, "", "");
if(bin_fpath.IsEmpty()) return MessageBox("selected binary was canceled", wxICON_ERROR);
cfn.Assign(bin_fpath, wxPATH_NATIVE);
}
if(!cfn.IsFileExecutable()) return MessageBox("bin/exe isn't executable", wxICON_ERROR);
// check 'gmon.out' file exists
wxFileName gmon_cfn( cfn.GetPath() + wxFileName::GetPathSeparator() + GMON_FILENAME_OUT);
gmon_cfn.Normalize();
wxString gmonfn = gmon_cfn.GetFullPath();
if(!gmon_cfn.Exists()) {
gmonfn = wxFileSelector("Please select the gprof file", gmon_cfn.GetPath(), "gmon", "out");
if(gmonfn.IsEmpty()) return MessageBox("selected gprof was canceled", wxICON_ERROR);
gmon_cfn.Assign(gmonfn, wxPATH_NATIVE);
}
wxString bin, arg1, arg2;
bin = GetGprofPath();
arg1 = bin_fpath;
arg2 = gmonfn;
wxString cmdgprof = wxString::Format("%s %s %s", bin, arg1, arg2);
// myLog("about to wxExecute(\"%s\")", cmdgprof);
wxProcess* proc = new wxProcess(wxPROCESS_REDIRECT);
// wxStopWatch sw;
const int err = ::wxExecute(cmdgprof, wxEXEC_SYNC, proc);
// on sync returns 0 (success), -1 (failure / "couldn't be started")
// myLog("wxExecute() returned err %d, had pid %d", err, (int)proc->GetPid());
wxInputStream* process_is = proc->GetInputStream();
if(!process_is || !process_is->CanRead())
return MessageBox(_("wxProcess::GetInputStream() can't be opened, aborting"), wxICON_ERROR);
// start parsing and writing to dot language file
GprofParser pgp;
pgp.GprofParserStream(process_is);
// myLog("gprof done (read %d lines)", (int) pgp.lines.GetCount());
delete proc;
ConfCallGraph conf;
config_tool->ReadObject(wxT("CallGraph"), &conf);
DotWriter dotWriter;
// DotWriter
dotWriter.SetLineParser(&(pgp.lines));
int suggestedThreshold = pgp.GetSuggestedNodeThreshold();
if(suggestedThreshold <= conf.GetTresholdNode()) {
suggestedThreshold = conf.GetTresholdNode();
dotWriter.SetDotWriterFromDialogSettings(m_mgr);
} else {
dotWriter.SetDotWriterFromDetails(conf.GetColorsNode(),
conf.GetColorsEdge(),
suggestedThreshold,
conf.GetTresholdEdge(),
conf.GetHideParams(),
conf.GetStripParams(),
conf.GetHideNamespaces());
wxString suggest_msg = wxString::Format(_("The CallGraph plugin has suggested node threshold %d to speed-up "
"the call graph creation. You can alter it on the call graph panel."),
suggestedThreshold);
MessageBox(suggest_msg, wxICON_INFORMATION);
}
dotWriter.WriteToDotLanguage();
// build output dir
cfn.Assign(base_path, "");
cfn.AppendDir(CALLGRAPH_DIR);
cfn.Normalize();
if(!cfn.DirExists()) cfn.Mkdir(wxS_DIR_DEFAULT, wxPATH_MKDIR_FULL);
cfn.SetFullName(DOT_FILENAME_TXT);
wxString dot_fn = cfn.GetFullPath();
dotWriter.SendToDotAppOutputDirectory(dot_fn);
cfn.SetFullName(DOT_FILENAME_PNG);
wxString output_png_fn = cfn.GetFullPath();
// delete any existing PNG
if(wxFileExists(output_png_fn)) wxRemoveFile(output_png_fn);
wxString cmddot_ln;
cmddot_ln << GetDotPath() << " -Tpng -o" << output_png_fn << " " << dot_fn;
// myLog("wxExecute(\"%s\")", cmddot_ln);
wxExecute(cmddot_ln, wxEXEC_SYNC | wxEXEC_HIDE_CONSOLE);
// myLog("dot done");
if(!wxFileExists(output_png_fn))
return MessageBox(_("Failed to open file CallGraph.png. Please check the project settings, rebuild the project "
"and try again."),
wxICON_INFORMATION);
// show image and create table in the editor tab page
uicallgraphpanel* panel = new uicallgraphpanel(
m_mgr->GetEditorPaneNotebook(), m_mgr, output_png_fn, base_path, suggestedThreshold, &(pgp.lines));
wxString tstamp = wxDateTime::Now().Format(wxT(" %Y-%m-%d %H:%M:%S"));
wxString title = wxT("Call graph for \"") + output_png_fn + wxT("\" " + tstamp);
m_mgr->AddEditorPage(panel, title);
}