void UnwrapMod::fnPasteInstance()
{
//make sure mods are the same
theHold.Begin();
HoldPointsAndFaces();
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
if ((this == copyPasteBuffer.mod) && (ld == copyPasteBuffer.lmd))
{
BitArray faceSel = ld->GetFaceSelection();
//loop through selected faces
int copyIndex = 0;
for (int i =0; i < faceSel.GetSize(); i++)
{
if (faceSel[i])
{
//make sure selected faces count = buffer face
if (( i < ld->GetNumberFaces()/*TVMaps.f.Count()*/) && (copyIndex < copyPasteBuffer.faceData.Count()))
{
int degree = ld->GetFaceDegree(i);
if (degree == copyPasteBuffer.faceData[copyIndex]->count)
{
//if so set the face data indices as the same
for (int j = 0; j < degree; j++)
{
//index into the texture vertlist
ld->SetFaceTVVert(i,j,copyPasteBuffer.faceData[copyIndex]->t[j]);//TVMaps.f[i]->t[j] = copyPasteBuffer.faceData[copyIndex]->t[j];
//index into the geometric vertlist
if ((ld->GetFaceHasVectors(i)/*TVMaps.f[i]->vecs*/) && (j < 4))
{
ld->SetFaceTVInterior(i,j,copyPasteBuffer.faceData[copyIndex]->vecs->interiors[j]);//TVMaps.f[i]->vecs->interiors[j] = copyPasteBuffer.faceData[copyIndex]->vecs->interiors[j];
ld->SetFaceTVHandle(i,j*2,copyPasteBuffer.faceData[copyIndex]->vecs->handles[j*2]);//TVMaps.f[i]->vecs->handles[j*2] = copyPasteBuffer.faceData[copyIndex]->vecs->handles[j*2];
ld->SetFaceTVHandle(i,j*2+1,copyPasteBuffer.faceData[copyIndex]->vecs->handles[j*2+1]);//TVMaps.f[i]->vecs->handles[j*2+1] = copyPasteBuffer.faceData[copyIndex]->vecs->handles[j*2+1];
}
}
copyIndex++;
}
}
}
}
ld->SetTVEdgeInvalid();
}
}
CleanUpDeadVertices();
theHold.Accept(GetString(IDS_PW_PASTE));
NotifyDependents(FOREVER,PART_ALL,REFMSG_CHANGE);
InvalidateView();
GetCOREInterface()->RedrawViews(GetCOREInterface()->GetTime());
}
void UnwrapMod::fnGizmoCenter()
{
//get our tm
//set the tm scale
TimeValue t = GetCOREInterface()->GetTime();
//get our selection
Box3 bounds;
bounds.Init();
//get the bounding box
Point3 pnorm(0.0f,0.0f,0.0f);
int ct = 0;
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
Matrix3 tm = mMeshTopoData.GetNodeTM(t,ldID);
for (int k = 0; k < ld->GetNumberFaces(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
bounds += ld->GetGeomVert(index) * tm; //gverts.d[index].p * tm;
if (j < 4)
temp_point[j] = ld->GetGeomVert(index) * tm; //gverts.d[index].p;
}
pnorm += Normalize(temp_point[1]-temp_point[0]^temp_point[2]-temp_point[1]);
ct++;
}
}
}
if (ct == 0) return;
theHold.Begin();
SuspendAnimate();
AnimateOff();
pnorm = pnorm / (float) ct;//gfaces.Count();
//if just a primary axis set the tm;
Point3 center = bounds.Center();
// build the scale
//get our tm
Matrix3 tm(1);
tm = *fnGetGizmoTM();
Matrix3 initialTM = tm;
Point3 vec2;
vec2 = Normalize(tm.GetRow(0));
tm.SetRow(0,vec2);
vec2 = Normalize(tm.GetRow(1)) ;
tm.SetRow(1,vec2);
vec2 = Normalize(tm.GetRow(2));
tm.SetRow(2,vec2);
tm.SetRow(3,center);
Matrix3 itm = Inverse(tm);
//find our x and y scale
Box3 localBounds;
localBounds.Init();
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
Matrix3 tm = mMeshTopoData.GetNodeTM(t,ldID);
for (int k = 0; k < ld->GetNumberFaces(); k++)
{
if (ld->GetFaceSelected(k))
{ // Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
Point3 p = ld->GetGeomVert(index) * tm * itm;//gverts.d[index].p * tm * itm;
localBounds += p;
// if (fabs(p.x) > xmax) xmax = fabs(p.x);
// if (fabs(p.y) > ymax) ymax = fabs(p.y);
// if (fabs(p.z) > zmax) zmax = fabs(p.z);
}
}
}
}
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP))
center = localBounds.Center() * tm;
else if (fnGetMapMode() == CYLINDRICALMAP)
{
Point3 zvec = initialTM.GetRow(2);
// center = center * tm;
center = localBounds.Center() * tm - (zvec * 0.5f);
}
initialTM.SetRow(3,center);
Matrix3 ptm(1), id(1);
initialTM = initialTM ;
SetXFormPacket tmpck(initialTM,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
ResumeAnimate();
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == CYLINDRICALMAP) || (fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
ApplyGizmo();
theHold.Accept(GetString(IDS_MAPPING_FIT));
fnGetGizmoTM();
if (ip) ip->RedrawViews(ip->GetTime());
}
void UnwrapMod::fnAlignAndFit(int axis)
{
//get our selection
Box3 bounds;
bounds.Init();
//get the bounding box
Point3 pnorm(0.0f,0.0f,0.0f);
int ct = 0;
TimeValue t = GetCOREInterface()->GetTime();
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
Matrix3 tm = mMeshTopoData.GetNodeTM(t,ldID);
for (int k = 0; k < ld->GetNumberFaces(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
bounds += ld->GetGeomVert(index) *tm;//gverts.d[index].p;
if (j < 4)
temp_point[j] = ld->GetGeomVert(index);//gverts.d[index].p;
}
pnorm += VectorTransform(Normalize(temp_point[1]-temp_point[0]^temp_point[2]-temp_point[1]),tm);
ct++;
}
}
}
if (ct == 0) return;
theHold.Begin();
SuspendAnimate();
AnimateOff();
pnorm = pnorm / (float) ct;
Matrix3 tm(1);
//if just a primary axis set the tm;
Point3 center = bounds.Center();
// build the scale
Point3 scale(bounds.Width().x ,bounds.Width().y , bounds.Width().z);
if (scale.x == 0.0f) scale.x = 1.0f;
if (scale.y == 0.0f) scale.y = 1.0f;
if (scale.z == 0.0f) scale.z = 1.0f;
if (axis == 0) // x axi
{
tm.SetRow(0,Point3(0.0f,-scale.y,0.0f));
tm.SetRow(1,Point3(0.0f,0.0f,scale.z));
tm.SetRow(2,Point3(scale.x,0.0f,0.0f));
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP) || (fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
tm.SetRow(3,center);
else if (fnGetMapMode() == CYLINDRICALMAP)
{
center.x = bounds.pmin.x;
tm.SetRow(3,center);
}
Matrix3 ptm(1), id(1);
tm = tm ;
SetXFormPacket tmpck(tm,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
}
else if (axis == 1) // y axi
{
tm.SetRow(0,Point3(scale.x,0.0f,0.0f));
tm.SetRow(1,Point3(0.0f,0.0f,scale.z));
tm.SetRow(2,Point3(0.0f,scale.y,0.0f));
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP)|| (fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
tm.SetRow(3,center);
else if (fnGetMapMode() == CYLINDRICALMAP)
{
center.y = bounds.pmin.y;
tm.SetRow(3,center);
}
Matrix3 ptm(1), id(1);
tm = tm;
SetXFormPacket tmpck(tm,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
}
else if (axis == 2) //z axi
{
tm.SetRow(0,Point3(scale.x,0.0f,0.0f));
tm.SetRow(1,Point3(0.0f,scale.y,0.0f));
tm.SetRow(2,Point3(0.0f,0.0f,scale.z));
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP)|| (fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
tm.SetRow(3,center);
else if (fnGetMapMode() == CYLINDRICALMAP)
{
center.z = bounds.pmin.z;
tm.SetRow(3,center);
}
Matrix3 ptm(1), id(1);
tm = tm;
SetXFormPacket tmpck(tm,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
}
else if (axis == 3) // normal
{
int numberOfSelectionGroups = 0;
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
if (ld->GetFaceSelection().NumberSet())
numberOfSelectionGroups++;
}
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP) || (numberOfSelectionGroups > 1))
{
//get our tm
Matrix3 tm;
UnwrapMatrixFromNormal(pnorm,tm);
Matrix3 itm = Inverse(tm);
//find our x and y scale
float xmax = 0.0f;
float ymax = 0.0f;
float zmax = 0.0f;
Box3 localBounds;
localBounds.Init();
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
Matrix3 tm = mMeshTopoData.GetNodeTM(t,ldID);
for (int k = 0; k < ld->GetNumberFaces(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
Point3 p = ld->GetGeomVert(index) * tm * itm;//gverts.d[index].p * itm;
localBounds += p;
}
}
}
}
// center = localBounds.Center();
xmax = localBounds.pmax.x - localBounds.pmin.x;
ymax = localBounds.pmax.y - localBounds.pmin.y;
zmax = localBounds.pmax.z - localBounds.pmin.z;
if (xmax < 0.001f)
xmax = 1.0f;
if (ymax < 0.001f)
ymax = 1.0f;
if (zmax < 0.001f)
zmax = 1.0f;
Point3 vec;
vec = Normalize(tm.GetRow(0)) * xmax;
tm.SetRow(0,vec);
vec = Normalize(tm.GetRow(1)) * ymax;
tm.SetRow(1,vec);
vec = Normalize(tm.GetRow(2)) * zmax;
tm.SetRow(2,vec);
tm.SetRow(3,center);
Matrix3 ptm(1), id(1);
tm = tm ;
SetXFormPacket tmpck(tm,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
}
else if ((fnGetMapMode() == CYLINDRICALMAP) || (fnGetMapMode() == SPHERICALMAP)|| (fnGetMapMode() == BOXMAP))
{
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
//get our first 2 rings
Tab<int> openEdges;
Tab<int> startRing;
Tab<int> endRing;
MeshTopoData *ld = mMeshTopoData[ldID];
//skip any local data that has no selections
if (ld->GetFaceSelection().NumberSet() == 0)
continue;
Matrix3 nodeTM = mMeshTopoData.GetNodeTM(t,ldID);
for (int i = 0; i < ld->GetNumberGeomEdges(); i++)//TVMaps.gePtrList.Count(); i++)
{
int numberSelectedFaces = 0;
int ct = ld->GetGeomEdgeNumberOfConnectedFaces(i);//TVMaps.gePtrList[i]->faceList.Count();
for (int j = 0; j < ct; j++)
{
int faceIndex = ld->GetGeomEdgeConnectedFace(i,j);//TVMaps.gePtrList[i]->faceList[j];
if (ld->GetFaceSelected(faceIndex))//fsel[faceIndex])
numberSelectedFaces++;
}
if (numberSelectedFaces == 1)
{
openEdges.Append(1,&i,1000);
}
}
GetOpenEdges(ld,openEdges, startRing);
GetOpenEdges(ld,openEdges, endRing);
Point3 zVec = pnorm;
Point3 centerS(0.0f,0.0f,0.0f), centerE;
if ((startRing.Count() != 0) && (endRing.Count() != 0))
{
//get the center start
Box3 BoundsS, BoundsE;
BoundsS.Init();
BoundsE.Init();
//get the center end
for (int i = 0; i < startRing.Count(); i++)
{
int eIndex = startRing[i];
int a = ld->GetGeomEdgeVert(eIndex,0);//TVMaps.gePtrList[eIndex]->a;
int b = ld->GetGeomEdgeVert(eIndex,1);//TVMaps.gePtrList[eIndex]->b;
BoundsS += ld->GetGeomVert(a) * nodeTM;//TVMaps.geomPoints[a];
BoundsS += ld->GetGeomVert(b) * nodeTM;//TVMaps.geomPoints[b];
}
for (int i = 0; i < endRing.Count(); i++)
{
int eIndex = endRing[i];
int a = ld->GetGeomEdgeVert(eIndex,0);//TVMaps.gePtrList[eIndex]->a;
int b = ld->GetGeomEdgeVert(eIndex,1);//TVMaps.gePtrList[eIndex]->b;
BoundsE += ld->GetGeomVert(a) * nodeTM;//TVMaps.geomPoints[a];
BoundsE += ld->GetGeomVert(b) * nodeTM;//TVMaps.geomPoints[b];
}
centerS = BoundsS.Center();
centerE = BoundsE.Center();
//create the vec
zVec = centerE - centerS;
}
else if ((startRing.Count() != 0) && (endRing.Count() == 0))
{
//get the center start
Box3 BoundsS;
BoundsS.Init();
//get the center end
for (int i = 0; i < startRing.Count(); i++)
{
int eIndex = startRing[i];
int a = ld->GetGeomEdgeVert(eIndex,0);//TVMaps.gePtrList[eIndex]->a;
int b = ld->GetGeomEdgeVert(eIndex,1);//TVMaps.gePtrList[eIndex]->b;
BoundsS += ld->GetGeomVert(a) * nodeTM;//TVMaps.geomPoints[a];
BoundsS += ld->GetGeomVert(b) * nodeTM;//TVMaps.geomPoints[b];
}
centerS = BoundsS.Center();
int farthestPoint= -1;
Point3 fp;
float farthestDist= 0.0f;
for (int k=0; k < ld->GetNumberFaces(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
Point3 p = ld->GetGeomVert(index)* nodeTM;//gverts.d[index].p;
float d = LengthSquared(p-centerS);
if ((d > farthestDist) || (farthestPoint == -1))
{
farthestDist = d;
farthestPoint = index;
fp = p;
}
}
}
}
centerE = fp;
//create the vec
zVec = centerE - centerS;
}
else
{
zVec = Point3(0.0f,0.0f,1.0f);
}
//get our tm
Matrix3 tm;
UnwrapMatrixFromNormal(zVec,tm);
tm.SetRow(3,centerS);
Matrix3 itm = Inverse(tm);
//find our x and y scale
float xmax = 0.0f;
float ymax = 0.0f;
float zmax = 0.0f;
Box3 localBounds;
localBounds.Init();
for (int k = 0; k < ld->GetNumberFaces(); k++)//gfaces.Count(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
Point3 p = ld->GetGeomVert(index) * nodeTM * itm;//gverts.d[index].p * itm;
localBounds += p;
}
}
}
center = localBounds.Center() * tm;
if (fnGetMapMode() == CYLINDRICALMAP)
{
if ((startRing.Count() == 0) && (endRing.Count() == 0))
{
centerS = center;
centerS.z = localBounds.pmin.z;
}
else
{
centerS = centerS * itm;
centerS.z = localBounds.pmin.z;
centerS = centerS * tm;
}
}
else if ((fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
{
centerS = center;
}
Point3 bc = localBounds.Center();
bc.z = localBounds.pmin.z;
bc = bc * tm;
xmax = localBounds.pmax.x - localBounds.pmin.x;
ymax = localBounds.pmax.y - localBounds.pmin.y;
zmax = localBounds.pmax.z - localBounds.pmin.z;
Point3 vec;
vec = Normalize(tm.GetRow(0)) * xmax;
tm.SetRow(0,vec);
vec = Normalize(tm.GetRow(1)) * ymax;
tm.SetRow(1,vec);
vec = Normalize(tm.GetRow(2)) * zmax;
tm.SetRow(2,vec);
tm.SetRow(3,centerS);
Matrix3 ptm(1), id(1);
tm = tm;
SetXFormPacket tmpck(tm,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
}
}
}
ResumeAnimate();
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == CYLINDRICALMAP) || (fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
ApplyGizmo();
theHold.Accept(GetString(IDS_MAPPING_ALIGN));
fnGetGizmoTM();
if (ip) ip->RedrawViews(ip->GetTime());
}
void UnwrapMod::fnGizmoReset()
{
theHold.Begin();
SuspendAnimate();
AnimateOff();
TimeValue t = GetCOREInterface()->GetTime();
//get our selection
Box3 bounds;
bounds.Init();
//get the bounding box
for(int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
Matrix3 tm = mMeshTopoData.GetNodeTM(t,ldID);
for (int k = 0; k < ld->GetNumberFaces(); k++)//gfaces.Count(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
bounds += ld->GetGeomVert(index) * tm;//gverts.d[index].p;
}
}
}
}
Matrix3 tm(1);
//if just a primary axis set the tm;
Point3 center = bounds.Center();
// build the scale
Point3 scale(bounds.Width().x ,bounds.Width().y , bounds.Width().z);
if (scale.x == 0.0f) scale.x = 1.0f;
if (scale.y == 0.0f) scale.y = 1.0f;
if (scale.z == 0.0f) scale.z = 1.0f;
float scl = scale.x;
if (scale.y > scl) scl = scale.y;
if (scale.z > scl) scl = scale.z;
scale.x = scl;
scale.y = scl;
scale.z = scl;
tm.SetRow(0,Point3(scale.x,0.0f,0.0f));
tm.SetRow(1,Point3(0.0f,scale.y,0.0f));
tm.SetRow(2,Point3(0.0f,0.0f,scale.z));
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP)|| (fnGetMapMode() == SPHERICALMAP))
tm.SetRow(3,center);
else if (fnGetMapMode() == CYLINDRICALMAP)
{
center.z = bounds.pmin.z;
tm.SetRow(3,center);
}
Matrix3 ptm(1), id(1);
tm = tm ;
SetXFormPacket tmpck(tm,ptm);
tmControl->SetValue(t,&tmpck,TRUE,CTRL_RELATIVE);
ResumeAnimate();
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == CYLINDRICALMAP) || (fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == BOXMAP))
ApplyGizmo();
theHold.Accept(GetString(IDS_MAPPING_RESET));
fnGetGizmoTM();
if (ip) ip->RedrawViews(ip->GetTime());
}
void UnwrapMod::ApplyGizmo()
{
if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP) ||
(fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == CYLINDRICALMAP))
{
ApplyGizmoPrivate();
}
else
{
theHold.Begin();
//compute the center
//get our normal list
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
ld->HoldFaceSel();
}
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
ld->HoldFaceSel();
Tab<Point3> fnorms;
fnorms.SetCount(ld->GetNumberFaces());
for (int k=0; k< fnorms.Count(); k++)
fnorms[k] = Point3(0.0f,0.0f,0.0f);
//get our projection normal
Point3 projectionNorm(0.0f,0.0f,0.0f);
//build normals
for (int k = 0; k < fnorms.Count(); k++)
{
if (ld->GetFaceSelected(k))
{
// Grap the three points, xformed
int pcount = 3;
// if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
pcount = ld->GetFaceDegree(k);//gfaces[k]->count;
Point3 temp_point[4];
for (int j=0; j<pcount; j++)
{
int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];
if (j < 4)
temp_point[j] = ld->GetGeomVert(index);//gverts.d[index].p;
}
fnorms[k] = Normalize(temp_point[1]-temp_point[0]^temp_point[2]-temp_point[1]);
}
}
BitArray front,back,left,right,top,bottom;
front.SetSize(ld->GetNumberFaces());
front.ClearAll();
back = front;
left = front;
right = front;
top = front;
bottom = front;
Tab<Point3> norms;
Matrix3 gtm(1);
TimeValue t = 0;
if (ip) t = ip->GetTime();
if (tmControl)
tmControl->GetValue(t,>m,FOREVER,CTRL_RELATIVE);
norms.SetCount(6);
for (int i = 0; i < 3; i++)
{
Point3 v = gtm.GetRow(i);
norms[i*2] = Normalize(v);
norms[i*2+1] = norms[i*2] * -1.0f;
}
for (int k=0; k< ld->GetNumberFaces(); k++)
{
if (ld->GetFaceSelected(k))
{
int closestFace = -1;
float closestAngle = -10.0f;
for (int j = 0; j < 6; j++)
{
float dot = DotProd(norms[j],fnorms[k]);
if (dot > closestAngle)
{
closestAngle = dot;
closestFace = j;
}
}
if (closestFace == 0)
front.Set(k,TRUE);
else if (closestFace == 1)
back.Set(k,TRUE);
else if (closestFace == 2)
left.Set(k,TRUE);
else if (closestFace == 3)
right.Set(k,TRUE);
else if (closestFace == 4)
top.Set(k,TRUE);
else if (closestFace == 5)
bottom.Set(k,TRUE);
}
}
gtm.IdentityMatrix();
if (tmControl)
tmControl->GetValue(t,>m,FOREVER,CTRL_RELATIVE);
Point3 xvec,yvec,zvec;
xvec = gtm.GetRow(0);
yvec = gtm.GetRow(1);
zvec = gtm.GetRow(2);
Point3 center = gtm.GetRow(3);
for (int k = 0; k < 6; k++)
{
Matrix3 tm(1);
if (k == 0)
{
tm.SetRow(0,yvec);
tm.SetRow(1,zvec);
tm.SetRow(2,xvec);
ld->SetFaceSelection(front);
}
else if (k == 1)
{
tm.SetRow(0,yvec);
tm.SetRow(1,zvec);
tm.SetRow(2,(xvec*-1.0f));
ld->SetFaceSelection(back);
}
else if (k == 2)
{
tm.SetRow(0,xvec);
tm.SetRow(1,zvec);
tm.SetRow(2,yvec);
ld->SetFaceSelection(left);
}
else if (k == 3)
{
tm.SetRow(0,xvec);
tm.SetRow(1,zvec);
tm.SetRow(2,(yvec *-1.0f));
ld->SetFaceSelection(right);
}
else if (k == 4)
{
tm.SetRow(0,xvec);
tm.SetRow(1,yvec);
tm.SetRow(2,zvec);
ld->SetFaceSelection(top);
}
else if (k == 5)
{
tm.SetRow(0,xvec);
tm.SetRow(1,yvec);
tm.SetRow(2,(zvec*-1.0f));
ld->SetFaceSelection(bottom);
}
tm.SetRow(3,center);
if (!fnGetNormalizeMap())
{
for (int i = 0; i < 3; i++)
{
Point3 vec = tm.GetRow(i);
vec = Normalize(vec);
tm.SetRow(i,vec);
}
}
tm = mMeshTopoData.GetNodeTM(t,ldID) * Inverse(tm);
ld->ApplyMap(fnGetMapMode(), fnGetNormalizeMap(), tm, this);
}
ld->RestoreFaceSel();
}
theHold.Accept(GetString(IDS_PW_PLANARMAP));
}
}
void UnwrapMod::CleanUpDeadVertices()
{
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
BitArray usedList;
usedList.SetSize(ld->GetNumberTVVerts());//TVMaps.v.Count());
usedList.ClearAll();
for (int i = 0; i < ld->GetNumberFaces(); i++)//TVMaps.f.Count(); i++)
{
if (!ld->GetFaceDead(i))
{
int degree = ld->GetFaceDegree(i);
for (int j = 0; j < degree; j++)
{
int vertIndex = ld->GetFaceTVVert(i,j);//TVMaps.f[i]->t[j];
usedList.Set(vertIndex);
//index into the geometric vertlist
if ((ld->GetFaceHasVectors(i)/*TVMaps.f[i]->vecs*/) && (j < 4))
{
vertIndex = ld->GetFaceTVInterior(i,j);//TVMaps.f[i]->vecs->interiors[j];
if ((vertIndex>=0) && (vertIndex < usedList.GetSize()))
usedList.Set(vertIndex);
vertIndex = ld->GetFaceTVHandle(i,j*2);//TVMaps.f[i]->vecs->handles[j*2];
if ((vertIndex>=0) && (vertIndex < usedList.GetSize()))
usedList.Set(vertIndex);
vertIndex = ld->GetFaceTVHandle(i,j*2+1);//TVMaps.f[i]->vecs->handles[j*2+1];
if ((vertIndex>=0) && (vertIndex < usedList.GetSize()))
usedList.Set(vertIndex);
}
}
}
}
int vInitalDeadCount = 0;
int vFinalDeadCount = 0;
for (int i =0; i < ld->GetNumberTVVerts(); i++)//TVMaps.v.Count(); i++)
{
if (ld->GetTVVertDead(i))//TVMaps.v[i].flags & FLAG_DEAD)
vInitalDeadCount++;
}
for (int i =0; i < usedList.GetSize(); i++)
{
BOOL isRigPoint = ld->GetTVVertFlag(i) & FLAG_RIGPOINT;
if (!usedList[i] && (!isRigPoint))
{
ld->DeleteTVVert(i,this);
// TVMaps.v[i].flags |= FLAG_DEAD;
}
}
for (int i =0; i < ld->GetNumberTVVerts(); i++)
{
if (ld->GetTVVertDead(i))//TVMaps.v[i].flags & FLAG_DEAD)
vFinalDeadCount++;
}
#ifdef DEBUGMODE
if (gDebugLevel >= 3)
ScriptPrint(_T("Cleaning Dead Verts Total Verts %d Initial Dead Verts %d Final Dead Verts %d \n"),vTotalCount,vInitalDeadCount,vFinalDeadCount);
#endif
}
}
void UnwrapMod::fnCopy()
{
int ct = 0;
int currentLDID = -1;
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
BitArray fsel = mMeshTopoData[ldID]->GetFaceSelection();
if (fsel.NumberSet())
{
currentLDID = ldID;
ct++;
}
}
if (ct > 1)
{
//pop warnign message
TSTR error,msg;
error.printf(_T("%s"),GetString(IDS_PW_ERROR));
msg.printf(_T("%s"),GetString(IDS_PW_COPYERROR));
MessageBox( NULL,msg,error,MB_OK);
return;
}
//check for type
if ((ct == 0) || (currentLDID==-1))
return;
copyPasteBuffer.iRotate = 0;
copyPasteBuffer.copyType = 2;
//make sure we only have one faces off of one local data selected
MeshTopoData *ld = mMeshTopoData[currentLDID];
copyPasteBuffer.mod = this;
//copy the vertex list over
copyPasteBuffer.tVertData.SetCount(ld->GetNumberTVVerts());//TVMaps.v.Count());
for (int i =0; i < ld->GetNumberTVVerts(); i++)//TVMaps.v.Count(); i++)
{
copyPasteBuffer.tVertData[i] = ld->GetTVVert(i);//TVMaps.v[i].p;
}
// MeshTopoData *md = (MeshTopoData*)mcList[0]->localData;//copy the face data over that is selected
copyPasteBuffer.lmd = ld;
for (int i = 0; i < copyPasteBuffer.faceData.Count(); i++)
{
delete copyPasteBuffer.faceData[i];
}
BitArray faceSel = ld->GetFaceSelection();
ct = faceSel.NumberSet();
if (faceSel.NumberSet() == ld->GetNumberFaces())//TVMaps.f.Count())
copyPasteBuffer.copyType = 1;
if (faceSel.NumberSet() == 1)
copyPasteBuffer.copyType = 0;
copyPasteBuffer.faceData.SetCount(ct);
int faceIndex = 0;
for (int i = 0; i < ld->GetNumberFaces(); i++)//TVMaps.f.Count(); i++)
{
if (faceSel[i])
{
UVW_TVFaceClass *f = ld->CloneFace(i);//TVMaps.f[i]->Clone();
copyPasteBuffer.faceData[faceIndex] = f;
faceIndex++;
}
}
}
void UnwrapMod::fnPaste(BOOL rotate)
{
//check for type
TimeValue t = GetCOREInterface()->GetTime();
theHold.Begin();
HoldPointsAndFaces();
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
//check faces if just one selected normal paste with rotates
//or if all faces where selected
//or if first paste
//hold the points and faces
BitArray holdFaceSel(ld->GetFaceSelection());
BitArray subFaceSel;
if ( ip && (ip->GetSubObjectLevel() == 0) )
{
//convert our current selection into faces
if (fnGetTVSubMode() == TVVERTMODE)
ld->GetFaceSelFromVert(subFaceSel,FALSE);
else if (fnGetTVSubMode() == TVEDGEMODE)
{
BitArray tempVSel;
ld->GetVertSelFromEdge(tempVSel);
BitArray vsel = ld->GetTVVertSelection();
BitArray holdVSel(vsel);
ld->SetTVVertSelection(tempVSel);//vsel = tempVSel;
ld->GetFaceSelFromVert(subFaceSel,FALSE);
ld->SetTVVertSelection(holdVSel);//vsel = holdVSel;
}
else if (fnGetTVSubMode() == TVFACEMODE)
{
subFaceSel = ld->GetFaceSelection();//.SetSize(fsel.GetSize());
//subFaceSel = fsel;
}
}
else
{
if (fnGetTVSubMode() == TVFACEMODE)
{
subFaceSel = ld->GetFaceSelection();//.SetSize(fsel.GetSize());
//subFaceSel = fsel;
}
}
if ( (copyPasteBuffer.copyType == 0) || (copyPasteBuffer.copyType == 1) || (copyPasteBuffer.iRotate==0))
{
int copyIndex = 0;
Tab<int> vertexLookUpList;
vertexLookUpList.SetCount(copyPasteBuffer.tVertData.Count());
BitArray faceSel = ld->GetFaceSelection();
for (int i =0; i < vertexLookUpList.Count(); i++)
vertexLookUpList[i] = -1;
if (copyPasteBuffer.copyType == 1)
copyPasteBuffer.iRotate = 0;
else
{
if (copyPasteBuffer.lastSel.GetSize() == faceSel.GetSize())
{
if (copyPasteBuffer.lastSel == faceSel)
{
if (rotate)
{
copyPasteBuffer.iRotate++;
}
else copyPasteBuffer.iRotate = 0;
}
}
}
if (copyPasteBuffer.copyType == 2) copyPasteBuffer.iRotate = 0;
copyPasteBuffer.lastSel = faceSel;
//loop through selected faces
for (int i =0; i < faceSel.GetSize(); i++)
{
if (faceSel[i])
{
//make sure selected faces count = buffer face
if (( i < ld->GetNumberFaces()/*TVMaps.f.Count()*/) && (copyIndex < copyPasteBuffer.faceData.Count()))
{
int degree = ld->GetFaceDegree(i);
if (/*TVMaps.f[i]->count*/ degree == copyPasteBuffer.faceData[copyIndex]->count)
{
//if so set the face data indices as the same
for (int j = 0; j < degree/*TVMaps.f[i]->count*/; j++)
{
//index into the texture vertlist
int vid = (j + copyPasteBuffer.iRotate)%degree;//TVMaps.f[i]->count;
int vertexIndex = copyPasteBuffer.faceData[copyIndex]->t[vid];
if (vertexLookUpList[vertexIndex] == -1)
{
Point3 p = copyPasteBuffer.tVertData[vertexIndex];
ld->AddTVVert(t, p, i, j, this,FALSE);//ld->AddPoint(p, i, j,FALSE);
vertexLookUpList[vertexIndex] = ld->GetFaceTVVert(i,j);//TVMaps.f[i]->t[j];
}
else
ld->SetFaceTVVert(i,j,vertexLookUpList[vertexIndex]);//TVMaps.f[i]->t[j] = vertexLookUpList[vertexIndex];
if ((ld->GetFaceHasVectors(i)/*TVMaps.f[i]->vecs*/) && (copyPasteBuffer.faceData[copyIndex]->vecs) && (j < 4))
{
int hid = (j*2 + (copyPasteBuffer.iRotate*2))%(/*TVMaps.f[i]->count*/degree*2);
int handleIndex = copyPasteBuffer.faceData[copyIndex]->vecs->handles[hid];
if ((handleIndex >= 0) && (vertexLookUpList[handleIndex] == -1))
{
Point3 p = copyPasteBuffer.tVertData[handleIndex];
ld->AddTVHandle(t,p, i, j*2,this,FALSE);
vertexLookUpList[handleIndex] = ld->GetFaceTVHandle(i,j*2);// TVMaps.f[i]->vecs->handles[j*2];
}
else
ld->SetFaceTVHandle(i,j*2,vertexLookUpList[handleIndex]);//TVMaps.f[i]->vecs->handles[j*2] = vertexLookUpList[handleIndex];
hid = (j*2 + (copyPasteBuffer.iRotate*2))%(degree/*TVMaps.f[i]->count*/*2)+1;
handleIndex = copyPasteBuffer.faceData[copyIndex]->vecs->handles[hid];
if ((handleIndex >= 0) && (vertexLookUpList[handleIndex] == -1))
{
Point3 p = copyPasteBuffer.tVertData[handleIndex];
ld->AddTVHandle(t,p, i, j*2+1,this,FALSE);
vertexLookUpList[handleIndex] = ld->GetFaceTVHandle(i,j*2+1);//TVMaps.f[i]->vecs->handles[j*2+1];
}
else
ld->SetFaceTVHandle(i,j*2+1,vertexLookUpList[handleIndex]);//TVMaps.f[i]->vecs->handles[j*2+1] = vertexLookUpList[handleIndex];
int iid = (j + (copyPasteBuffer.iRotate))%degree;//(TVMaps.f[i]->count);
int interiorIndex = copyPasteBuffer.faceData[copyIndex]->vecs->interiors[iid];
if ((interiorIndex >= 0) && (vertexLookUpList[interiorIndex] == -1))
{
Point3 p = copyPasteBuffer.tVertData[interiorIndex];
ld->AddTVInterior(t,p, i, j,this,FALSE);
vertexLookUpList[interiorIndex] = ld->GetFaceTVInterior(i,j);//TVMaps.f[i]->vecs->handles[j];
}
else
ld->SetFaceTVInterior(i,j,vertexLookUpList[interiorIndex]);//TVMaps.f[i]->vecs->interiors[j] = vertexLookUpList[interiorIndex];
}
}
copyIndex++;
if (copyIndex >= copyPasteBuffer.faceData.Count()) copyIndex = 0;
}
}
}
}
}
ld->SetTVEdgeInvalid();//RebuildEdges();
if ( ip && (ip->GetSubObjectLevel() == 0) )
{
if (fnGetTVSubMode() == TVVERTMODE)
{
BitArray fsel = ld->GetFaceSelection();
BitArray vsel = ld->GetTVVertSelection();
BitArray holdFSel(fsel);
fsel = subFaceSel;
ld->GetVertSelFromFace(vsel);
ld->SetTVVertSelection(vsel);
ld->SetFaceSelection(holdFSel);//fsel = holdFSel;
}
else if (fnGetTVSubMode() == TVEDGEMODE)
{
BitArray fsel = ld->GetFaceSelection();
BitArray esel = ld->GetTVEdgeSelection();
BitArray holdFSel(fsel);
fsel = subFaceSel;
ld->GetVertSelFromFace(fsel);
ld->SetFaceSelection(fsel);//
ld->GetEdgeSelFromVert(esel,FALSE);
ld->SetTVEdgeSelection(esel);
ld->SetFaceSelection(holdFSel);//fsel = holdFSel;
}
else if (fnGetTVSubMode() == TVFACEMODE)
{
ld->SetFaceSelection(subFaceSel);//fsel = subFaceSel;
}
}
else
{
// md->faceSel = holdFaceSel;
ld->SetFaceSelection(subFaceSel);
/*
if (fnGetTVSubMode() == TVFACEMODE)
{
ld->SetFaceSelection(subFaceSel);//fsel = subFaceSel;
}
*/
}
}
CleanUpDeadVertices();
theHold.Accept(GetString(IDS_PW_PASTE));
NotifyDependents(FOREVER,PART_ALL,REFMSG_CHANGE);
InvalidateView();
GetCOREInterface()->RedrawViews(GetCOREInterface()->GetTime());
}
void UnwrapMod::fnFlattenMapByMatID(float angleThreshold, float spacing, BOOL normalize, int layoutType, BOOL rotateClusters, BOOL fillHoles)
{
int holdSubMode = fnGetTVSubMode();
fnSetTVSubMode(TVVERTMODE);
// vsel.SetAll();
Tab<Point3*> normList;
normList.SetCount(6);
normList[0] = new Point3(1.0f,0.0f,0.0f);
normList[1] = new Point3(-1.0f,0.0f,0.0f);
normList[2] = new Point3(0.0f,1.0f,0.0f);
normList[3] = new Point3(0.0f,-1.0f,0.0f);
normList[4] = new Point3(0.0f,0.0f,1.0f);
normList[5] = new Point3(0.0f,0.0f,-1.0f);
int largestID = -1;
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
for (int i = 0; i < ld->GetNumberFaces(); i++)//TVMaps.f.Count(); i++)
{
int matID = ld->GetFaceMatID(i);
if (matID > largestID)
largestID = matID;
}
}
BitArray usedMats;
usedMats.SetSize(largestID+1);
usedMats.ClearAll();
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
for (int i = 0; i < ld->GetNumberFaces(); i++)//TVMaps.f.Count(); i++)
{
int matID = ld->GetFaceMatID(i);
usedMats.Set(matID,TRUE);
}
}
Tab<int> matIDs;
matIDs.SetCount(usedMats.NumberSet());
int ct = 0;
for (int i = 0; i < usedMats.GetSize(); i++)
{
if (usedMats[i])
{
matIDs[ct] = i;
ct++;
}
}
//loop through our mat ID
Tab<ClusterClass*> matIDClusters;
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
for (int i = 0; i < matIDs.Count(); i++)
{
int matID = matIDs[i];
FreeClusterList();
for (int ldIDSel = 0; ldIDSel < mMeshTopoData.Count(); ldIDSel++)
{
mMeshTopoData[ldIDSel]->ClearFaceSelection();
}
ld->SelectByMatID(matID);
if (ld->GetFaceSelection().NumberSet())
{
ClusterClass *mcluster = new ClusterClass();
mcluster->ld = ld;
for (int j = 0; j < ld->GetNumberFaces(); j++)//TVMaps.f.Count(); j++)
{
if (ld->GetFaceSelected(j))//(TVMaps.f[j]->MatID == matIDs[i])
{
mcluster->faces.Append(1,&j,100);
}
}
matIDClusters.Append(1,&mcluster,5);
fnFlattenMap(flattenAngleThreshold, &normList, flattenSpacing, FALSE, 2, flattenRotate, flattenCollapse);
}
}
}
FreeClusterList();
clusterList.SetCount(matIDClusters.Count());
for (int i = 0; i < matIDClusters.Count(); i++)
{
clusterList[i] = new ClusterClass();
clusterList[i]->ld = matIDClusters[i]->ld;
clusterList[i]->faces.SetCount(matIDClusters[i]->faces.Count());
for (int j = 0; j < matIDClusters[i]->faces.Count(); j++)
clusterList[i]->faces[j] = matIDClusters[i]->faces[j];
}
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
mMeshTopoData[ldID]->UpdateClusterVertices(clusterList);
Pack(0, spacing, normalize, rotateClusters, fillHoles,FALSE,FALSE);
FreeClusterList();
TimeValue t = GetCOREInterface()->GetTime();
if (normalize)
{
float per = 1.0f-(spacing*2.0f);
float add = spacing;
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
for (int i = 0; i < ld->GetNumberTVVerts(); i++)//TVMaps.v.Count(); i++)
{
Point3 p = ld->GetTVVert(i);
p *= per;
p.x += add;
p.y += add;
ld->SetTVVert(t,i,p,this);
// if (TVMaps.cont[i])
// TVMaps.cont[i]->SetValue(0,&TVMaps.v[i].p,CTRL_ABSOLUTE);
}
}
}
for (int i = 0; i < matIDs.Count(); i++)
{
if (matIDClusters[i])
delete matIDClusters[i];
}
for (int i = 0; i < 6; i++)
delete normList[i];
fnSetTVSubMode(holdSubMode);
}
void UnwrapMod::fnUnfoldSelectedPolygons(int unfoldMethod, BOOL normalize)
{
// flatten selected polygons
if (!ip) return;
BailStart();
theHold.Begin();
HoldPointsAndFaces();
Point3 normal(0.0f,0.0f,1.0f);
for (int ldID =0; ldID < mMeshTopoData.Count(); ldID++)
{
MeshTopoData *ld = mMeshTopoData[ldID];
ld->HoldFaceSel();
}
BOOL bContinue = TRUE;
for (int ldID =0; ldID < mMeshTopoData.Count(); ldID++)
{
Tab<Point3> mapNormal;
mapNormal.SetCount(0);
MeshTopoData *ld = mMeshTopoData[ldID];
for (int ldIDPrep =0; ldIDPrep < mMeshTopoData.Count(); ldIDPrep++)
{
MeshTopoData *ldPrep = mMeshTopoData[ldIDPrep];
if (ld != ldPrep)
ldPrep->ClearFaceSelection();
else
ldPrep->RestoreFaceSel();
}
//hold our face selection
//get our processed list
BitArray holdFaces = ld->GetFaceSelection();
BitArray processedFaces = ld->GetFaceSelection();
while (processedFaces.NumberSet())
{
//select the first one
int seed = -1;
for (int faceID = 0; faceID < processedFaces.GetSize(); faceID++)
{
if (processedFaces[faceID])
{
seed = faceID;
faceID = processedFaces.GetSize();
}
}
BitArray faceSel = ld->GetFaceSel();
faceSel.ClearAll();
//select the element the first one
faceSel.Set(seed,TRUE);
//select it
ld->SetFaceSel(faceSel);
SelectGeomElement(ld);
faceSel = ld->GetFaceSel();
// ld->SelectElement(TVFACEMODE,FALSE);
faceSel &= holdFaces;
//remove that from our process list
for (int faceID = 0; faceID < faceSel.GetSize(); faceID++)
{
if (faceSel[faceID])
{
processedFaces.Set(faceID,FALSE);
}
}
ld->SetFaceSel(faceSel);
bContinue = BuildCluster( mapNormal, 5.0f, TRUE, TRUE, MeshTopoData::kFaceAngle);
TSTR statusMessage;
if (bContinue)
{
for (int i =0; i < clusterList.Count(); i++)
{
ld->ClearFaceSelection();
for (int j = 0; j < clusterList[i]->faces.Count();j++)
ld->SetFaceSelected(clusterList[i]->faces[j],TRUE);// sel.Set(clusterList[i]->faces[j]);
ld->PlanarMapNoScale(clusterList[i]->normal,this);
int per = (i * 100)/clusterList.Count();
statusMessage.printf(_T("%s %d%%."),GetString(IDS_PW_STATUS_MAPPING),per);
if (Bail(ip,statusMessage))
{
i = clusterList.Count();
bContinue = FALSE;
}
}
DebugPrint (_T("Final Vct %d \n"),ld->GetNumberTVVerts());
if ( (bContinue) && (clusterList.Count() > 1) )
{
Tab<Point3> objNormList;
BuildNormals(ld,objNormList);
//remove internal edges
Tab<int> clusterGroups;
clusterGroups.SetCount(ld->GetNumberFaces());
for (int i =0; i < clusterGroups.Count(); i++)
{
clusterGroups[i] = -1;
}
for (int i = 0; i < clusterList.Count(); i++)
{
for (int j = 0; j < clusterList[i]->faces.Count(); j++)
{
int faceIndex = clusterList[i]->faces[j];
clusterGroups[faceIndex] = i;
}
}
BitArray processedClusters;
processedClusters.SetSize(clusterList.Count());
processedClusters.ClearAll();
Tab<BorderClass> edgesToBeProcessed;
BOOL done = FALSE;
processedClusters.Set(0);
clusterList[0]->newX = 0.0f;
clusterList[0]->newY = 0.0f;
// clusterList[0]->angle = 0.0f;
for (int i = 0; i < clusterList[0]->borderData.Count(); i++)
{
int outerFaceIndex = clusterList[0]->borderData[i].outerFace;
int connectedClusterIndex = clusterGroups[outerFaceIndex];
if ((connectedClusterIndex != 0) && (connectedClusterIndex != -1))
{
edgesToBeProcessed.Append(1,&clusterList[0]->borderData[i]);
}
}
BitArray seedFaceList;
seedFaceList.SetSize(clusterGroups.Count());
seedFaceList.ClearAll();
for (int i = 0; i < seedFaces.Count(); i++)
{
seedFaceList.Set(seedFaces[i]);
}
while (!done)
{
Tab<int> clustersJustProcessed;
clustersJustProcessed.ZeroCount();
done = TRUE;
int edgeToAlign = -1;
float angDist = PI*2;
if (unfoldMethod == 1)
angDist = PI*2;
else if (unfoldMethod == 2) angDist = 0;
int i;
for (i = 0; i < edgesToBeProcessed.Count(); i++)
{
int outerFace = edgesToBeProcessed[i].outerFace;
int connectedClusterIndex = clusterGroups[outerFace];
if (!processedClusters[connectedClusterIndex])
{
int innerFaceIndex = edgesToBeProcessed[i].innerFace;
int outerFaceIndex = edgesToBeProcessed[i].outerFace;
//get angle
Point3 innerNorm, outerNorm;
innerNorm = objNormList[innerFaceIndex];
outerNorm = objNormList[outerFaceIndex];
float dot = DotProd(innerNorm,outerNorm);
float angle = 0.0f;
if (dot == -1.0f)
angle = PI;
else if (dot >= 1.0f)
angle = 0.f;
else angle = acos(dot);
if (unfoldMethod == 1)
{
if (seedFaceList[outerFaceIndex])
angle = 0.0f;
if (angle < angDist)
{
angDist = angle;
edgeToAlign = i;
}
}
else if (unfoldMethod == 2)
{
if (seedFaceList[outerFaceIndex])
angle = 180.0f;
if (angle > angDist)
{
angDist = angle;
edgeToAlign = i;
}
}
}
}
if (edgeToAlign != -1)
{
int innerFaceIndex = edgesToBeProcessed[edgeToAlign].innerFace;
int outerFaceIndex = edgesToBeProcessed[edgeToAlign].outerFace;
int edgeIndex = edgesToBeProcessed[edgeToAlign].edge;
int connectedClusterIndex = clusterGroups[outerFaceIndex];
seedFaceList.Set(outerFaceIndex, FALSE);
processedClusters.Set(connectedClusterIndex);
clustersJustProcessed.Append(1,&connectedClusterIndex);
ld->AlignCluster(clusterList,connectedClusterIndex,innerFaceIndex, outerFaceIndex,edgeIndex,this);
done = FALSE;
}
//build new cluster list
for (int j = 0; j < clustersJustProcessed.Count(); j++)
{
int clusterIndex = clustersJustProcessed[j];
for (int i = 0; i < clusterList[clusterIndex]->borderData.Count(); i++)
{
int outerFaceIndex = clusterList[clusterIndex]->borderData[i].outerFace;
int connectedClusterIndex = clusterGroups[outerFaceIndex];
if ((connectedClusterIndex != 0) && (connectedClusterIndex != -1) && (!processedClusters[connectedClusterIndex]))
{
edgesToBeProcessed.Append(1,&clusterList[clusterIndex]->borderData[i]);
}
}
}
}
}
ld->ClearSelection(TVVERTMODE);
for (int i = 0; i < clusterList.Count(); i++)
{
MeshTopoData *ld = clusterList[i]->ld;
ld->UpdateClusterVertices(clusterList);
for (int j =0; j < clusterList[i]->faces.Count(); j++)
{
int faceIndex = clusterList[i]->faces[j];
int degree = ld->GetFaceDegree(faceIndex);
for (int k =0; k < degree; k++)
{
int vertexIndex = ld->GetFaceTVVert(faceIndex,k);//TVMaps.f[faceIndex]->t[k];
ld->SetTVVertSelected(vertexIndex,TRUE);//vsel.Set(vertexIndex);
}
}
}
//now weld the verts
if (normalize)
{
NormalizeCluster();
}
ld->WeldSelectedVerts(0.001f,this);
}
FreeClusterList();
}
}
if (bContinue)
{
theHold.Accept(GetString(IDS_PW_PLANARMAP));
theHold.Suspend();
fnSyncTVSelection();
theHold.Resume();
}
else
{
theHold.Cancel();
}
for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
{
mMeshTopoData[ldID]->BuildTVEdges();
mMeshTopoData[ldID]->RestoreFaceSel();
}
theHold.Suspend();
fnSyncGeomSelection();
theHold.Resume();
if (matid != -1) // if we have a matID fileter set we need to rebuild since topology has changed
SetMatFilters();
NotifyDependents(FOREVER,PART_SELECT,REFMSG_CHANGE);
InvalidateView();
}