void FCEUI_MakeBackupMovie(bool dispMessage)
{
//This function generates backup movie files
string currentFn; //Current movie fillename
string backupFn; //Target backup filename
string tempFn; //temp used in back filename creation
stringstream stream;
int x; //Temp variable for string manip
bool exist = false; //Used to test if filename exists
bool overflow = false; //Used for special situation when backup numbering exceeds limit
currentFn = curMovieFilename; //Get current moviefilename
backupFn = curMovieFilename; //Make backup filename the same as current moviefilename
x = backupFn.find_last_of("."); //Find file extension
backupFn = backupFn.substr(0,x); //Remove extension
tempFn = backupFn; //Store the filename at this point
for (unsigned int backNum=0;backNum<999;backNum++) //999 = arbituary limit to backup files
{
stream.str(""); //Clear stream
if (backNum > 99)
stream << "-" << backNum; //assign backNum to stream
else if (backNum <= 99 && backNum >= 10)
stream << "-0" << backNum; //Make it 010, etc if two digits
else
stream << "-00" << backNum; //Make it 001, etc if single digit
backupFn.append(stream.str()); //add number to bak filename
backupFn.append(".bak"); //add extension
exist = CheckFileExists(backupFn.c_str()); //Check if file exists
if (!exist)
break; //Yeah yeah, I should use a do loop or something
else
{
backupFn = tempFn; //Before we loop again, reset the filename
if (backNum == 999) //If 999 exists, we have overflowed, let's handle that
{
backupFn.append("-001.bak"); //We are going to simply overwrite 001.bak
overflow = true; //Flag that we have exceeded limit
break; //Just in case
}
}
}
MovieData md = currMovieData; //Get current movie data
EMUFILE* outf = new EMUFILE_FILE(backupFn.c_str(),"wb"); //FCEUD_UTF8_fstream(backupFn, "wb"); //open/create file
md.dump(outf,false); //dump movie data
delete outf; //clean up, delete file object
//TODO, decide if fstream successfully opened the file and print error message if it doesn't
if (dispMessage) //If we should inform the user
{
// if (overflow)
// FCEUI_DispMessage("Backup overflow, overwriting %s",backupFn.c_str()); //Inform user of overflow
// else
// FCEUI_DispMessage("%s created",backupFn.c_str()); //Inform user of backup filename
}
}
bool CheckTimelines(MovieData& stateMovie, MovieData& currMovie, int& errorFr)
{
bool isInTimeline = true;
int length;
//First check, make sure we are checking is for a post-movie savestate, we just want to adjust the length for now, we will handle this situation later in another function
if (currFrameCounter <= stateMovie.getNumRecords())
length = currFrameCounter; //Note: currFrameCounter corresponds to the framecounter in the savestate
else if (currFrameCounter > currMovie.getNumRecords()) //Now that we know the length of the records of the savestate we plan to load, let's match the length against the movie
length = currMovie.getNumRecords(); //If length < currMovie records then this is a "future" event from the current movie, againt we will handle this situation later, we just want to find the right number of frames to compare
else
length = stateMovie.getNumRecords();
for (int x = 0; x < length; x++)
{
if (!stateMovie.records[x].Compare(currMovie.records[x]))
{
isInTimeline = false;
errorFr = x;
break;
}
}
return isInTimeline;
}
void FCEUI_CreateMovieFile(std::string fn)
{
MovieData md = currMovieData; //Get current movie data
EMUFILE* outf = FCEUD_UTF8_fstream(fn, "wb"); //open/create file
md.dump(outf,false); //dump movie data
delete outf; //clean up, delete file object
}
//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
static void FCEUI_SaveMovie(const char *fname, std::wstring author)
{
//if(!FCEU_IsValidUI(FCEUI_RECORDMOVIE))
// return;
assert(fname);
FCEUI_StopMovie();
openRecordingMovie(fname);
currFrameCounter = 0;
//LagCounterReset();
currMovieData = MovieData();
currMovieData.guid.newGuid();
if(author != L"") currMovieData.comments.push_back(L"author " + author);
//currMovieData.romChecksum = GameInfo->MD5;
//currMovieData.romFilename = FileBase;
//todo ?
//poweron(true);
//else
// MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);
//we are going to go ahead and dump the header. from now on we will only be appending frames
currMovieData.dump(osRecordingMovie, false);
movieMode = MOVIEMODE_RECORD;
movie_readonly = false;
currRerecordCount = 0;
//FCEU_DispMessage("Movie recording started.");
}
int FCEUMOV_WriteState(EMUFILE* os)
{
//we are supposed to dump the movie data into the savestate
if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_FINISHED)
return currMovieData.dump(os, true);
else return 0;
}
static int FCEUMOV_WriteState(std::ostream* os)
{
//we are supposed to dump the movie data into the savestate
if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
return currMovieData.dump(os, true);
else return 0;
}
void mov_savestate(std::ostream *os)//std::ostream* os
{
if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
{
write32lemov(kMOVI,os);
currMovieData.dump(os, true);
}
else
{
write32lemov(kNOMO,os);
}
}
void mov_savestate(EMUFILE* fp)
{
//we are supposed to dump the movie data into the savestate
//if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
// return currMovieData.dump(os, true);
//else return 0;
if(movieMode != MOVIEMODE_INACTIVE)
{
write32le(kMOVI,fp);
currMovieData.dump(fp, true);
}
else
{
write32le(kNOMO,fp);
}
}
//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
void SaveMovie(const char *fname, std::string author, int controllers)
{
assert(fname);
StopMovie();
openRecordingMovie(fname);
currFrameCounter = 0;
//LagCounterReset();
currMovieData = MovieData();
// currMovieData.guid.newGuid();
if(author != "") currMovieData.comments.push_back("author " + author);
//currMovieData.romChecksum = GameInfo->MD5;
// currMovieData.romFilename = cdip->gamename;//GetRomName();
// extern bool _HACK_DONT_STOPMOVIE;
// _HACK_DONT_STOPMOVIE = true;
pcejin.lagFrameCounter = 0;
pcejin.isLagFrame = false;
PCE_Power();
// _HACK_DONT_STOPMOVIE = false;
currMovieData.ports = controllers;
//todo ?
//poweron(true);
//else
// MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);
//we are going to go ahead and dump the header. from now on we will only be appending frames
currMovieData.dump(osRecordingMovie, false);
movieMode = MOVIEMODE_RECORD;
movie_readonly = false;
currRerecordCount = 0;
ClearPCESRAM();
LagFrameCounter=0;
DisplayMessage("Movie recording started.");
}
//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
void FCEUI_SaveMovie(const char *fname, EMOVIE_FLAG flags, std::wstring author)
{
if(!FCEU_IsValidUI(FCEUI_RECORDMOVIE))
return;
assert(fname);
FCEUI_StopMovie();
openRecordingMovie(fname);
currFrameCounter = 0;
LagCounterReset();
FCEUMOV_CreateCleanMovie();
#ifndef _GLIBCXX_USE_WCHAR_T
if(author != "") currMovieData.comments.push_back("author " + author);
#else
if(author != L"") currMovieData.comments.push_back(L"author " + author);
#endif
if(flags & MOVIE_FLAG_FROM_POWERON)
{
movieFromPoweron = true;
poweron(true);
}
else
{
movieFromPoweron = false;
MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);
}
FCEUMOV_ClearCommands();
//we are going to go ahead and dump the header. from now on we will only be appending frames
currMovieData.dump(osRecordingMovie, false);
movieMode = MOVIEMODE_RECORD;
movie_readonly = false;
FCEU_DispMessage("Movie recording started.",0);
}
bool mov_loadstate(EMUFILE* fp, int size)
{
load_successful = false;
u32 cookie;
if(read32le(&cookie,fp) != 1) return false;
if(cookie == kNOMO)
{
if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
FinishPlayback();
return true;
}
else if(cookie != kMOVI)
return false;
size -= 4;
if (!movie_readonly && autoMovieBackup && freshMovie) //If auto-backup is on, movie has not been altered this session and the movie is in read+write mode
{
FCEUI_MakeBackupMovie(false); //Backup the movie before the contents get altered, but do not display messages
}
//a little rule: cant load states in read+write mode with a movie from an archive.
//so we are going to switch it to readonly mode in that case
// if(!movie_readonly
// //*&& FCEU_isFileInArchive(curMovieFilename)*/
// ) {
// FCEU_PrintError("Cannot loadstate in Read+Write with movie from archive. Movie is now Read-Only.");
// movie_readonly = true;
// }
MovieData tempMovieData = MovieData();
//int curr = fp->ftell();
if(!LoadFM2(tempMovieData, fp, size, false)) {
// is->seekg((uint32)curr+size);
/* extern bool FCEU_state_loading_old_format;
if(FCEU_state_loading_old_format) {
if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD) {
FCEUI_StopMovie();
FCEU_PrintError("You have tried to use an old savestate while playing a movie. This is unsupported (since the old savestate has old-format movie data in it which can't be converted on the fly)");
}
}*/
return false;
}
//----------------
//complex TAS logic for loadstate
//fully conforms to the savestate logic documented in the Laws of TAS
//http://tasvideos.org/LawsOfTAS/OnSavestates.html
//----------------
/*
Playback or Recording + Read-only
* Check that GUID of movie and savestate-movie must match or else error
o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
+ failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted if user has backup savstates enabled else stop movie
* Check that movie and savestate-movie are in same timeline. If not then this is a wrong timeline error.
o on error: a message informing that the savestate doesn't belong to this movie
+ failstate: loadstate attempt canceled, movie can resume as if not attempted if user has backup savestates enabled else stop movie
* Check that savestate-movie is not greater than movie. If not then this is a future event error and is not allowed in read-only
o on error: message informing that the savestate is from a frame after the last frame of the movie
+ failstate - loadstate attempt cancelled, movie can resume if user has backup savesattes enabled, else stop movie
* Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate
o on post-movie: See post-movie event section.
* All error checks have passed, state will be loaded
* Movie contained in the savestate will be discarded
* Movie is now in Playback mode
Playback, Recording + Read+write
* Check that GUID of movie and savestate-movie must match or else error
o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
+ failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted (stop movie if resume fails)canceled, movie can resume if backup savestates enabled else stopmovie
* Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate
o on post-movie: See post-movie event section.
* savestate passed all error checks and will now be loaded in its entirety and replace movie (note: there will be no truncation yet)
* current framecount will be set to savestate framecount
* on the next frame of input, movie will be truncated to framecount
o (note: savestate-movie can be a future event of the movie timeline, or a completely new timeline and it is still allowed)
* Rerecord count of movie will be incremented
* Movie is now in record mode
Post-movie savestate event
* Whan a savestate is loaded and is determined that the savestate-movie length is less than the savestate framecount then it is a post-movie savestate. These occur when a savestate was made during Movie Finished mode.
* If read+write, the entire savestate movie will be loaded and replace current movie.
* If read-only, the savestate movie will be discarded
* Mode will be switched to Move Finished
* Savestate will be loaded
* Current framecount changes to savestate framecount
* User will have control of input as if Movie inactive mode
*/
if(movieMode != MOVIEMODE_INACTIVE)
{
//handle moviefile mismatch
if(tempMovieData.guid != currMovieData.guid)
{
//mbg 8/18/08 - this code can be used to turn the error message into an OK/CANCEL
#if defined(WIN32) && !defined(WXPORT)
std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
int result = MessageBox(MainWindow->getHWnd(),msg.c_str(),"Error loading savestate",MB_OKCANCEL);
if(result == IDCANCEL)
return false;
#else
FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
return false;
#endif
}
closeRecordingMovie();
if(!movie_readonly)
{
currMovieData = tempMovieData;
currMovieData.rerecordCount = currRerecordCount;
}
if(currFrameCounter > (int)currMovieData.records.size())
{
// if the frame counter is longer than our current movie,
// switch to "finished" mode.
// this is a mode that behaves like "inactive"
// except it permits switching to play/record by loading an earlier savestate.
// (and we continue to store the finished movie in savestates made while finished)
osd->setLineColor(255,0,0); // let's make the text red too to hopefully catch the user's attention a bit.
FinishPlayback();
osd->setLineColor(255,255,255);
//FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
//return false;
}
else if(movie_readonly)
{
//-------------------------------------------------------------
//this code would reload the movie from disk. allegedly it is helpful to hexers, but
//it is way too slow with dsm format. so it is only here as a reminder, and in case someone
//wants to play with it
//-------------------------------------------------------------
//{
// fstream fs (curMovieFilename);
// if(!LoadFM2(tempMovieData, &fs, INT_MAX, false))
// {
// FCEU_PrintError("Failed to reload DSM after loading savestate");
// }
// fs.close();
// currMovieData = tempMovieData;
//}
//-------------------------------------------------------------
movieMode = MOVIEMODE_PLAY;
}
else
{
// #ifdef _S9XLUA_H
// if(!FCEU_LuaRerecordCountSkip())
currRerecordCount++;
// #endif
currMovieData.rerecordCount = currRerecordCount;
currMovieData.truncateAt(currFrameCounter);
openRecordingMovie(curMovieFilename);
if(!osRecordingMovie)
{
osd->setLineColor(255, 0, 0);
osd->addLine("Can't save movie file!");
}
//printf("DUMPING MOVIE: %d FRAMES\n",currMovieData.records.size());
currMovieData.dump(osRecordingMovie, false);
movieMode = MOVIEMODE_RECORD;
}
}
load_successful = true;
freshMovie = false;
return true;
}
static bool FCEUMOV_ReadState(std::istream* is, uint32 size)
{
load_successful = false;
//a little rule: cant load states in read+write mode with a movie from an archive.
//so we are going to switch it to readonly mode in that case
if(!movie_readonly
//*&& FCEU_isFileInArchive(curMovieFilename)*/
) {
FCEU_PrintError("Cannot loadstate in Read+Write with movie from archive. Movie is now Read-Only.");
movie_readonly = true;
}
MovieData tempMovieData = MovieData();
std::ios::pos_type curr = is->tellg();
if(!LoadFM2(tempMovieData, is, size, false)) {
/*is->seekg((uint32)curr+size);
extern bool FCEU_state_loading_old_format;
if(FCEU_state_loading_old_format) {
if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD) {
FCEUI_StopMovie();
FCEU_PrintError("You have tried to use an old savestate while playing a movie. This is unsupported (since the old savestate has old-format movie data in it which can't be converted on the fly)");
}
}*/
return false;
}
//complex TAS logic for when a savestate is loaded:
//----------------
//if we are playing or recording and toggled read-only:
// then, the movie we are playing must match the guid of the one stored in the savestate or else error.
// the savestate is assumed to be in the same timeline as the current movie.
// if the current movie is not long enough to get to the savestate's frame#, then it is an error.
// the movie contained in the savestate will be discarded.
// the emulator will be put into play mode.
//if we are playing or recording and toggled read+write
// then, the movie we are playing must match the guid of the one stored in the savestate or else error.
// the movie contained in the savestate will be loaded into memory
// the frames in the movie after the savestate frame will be discarded
// the in-memory movie will have its rerecord count incremented
// the in-memory movie will be dumped to disk as fcm.
// the emulator will be put into record mode.
//if we are doing neither:
// then, we must discard this movie and just load the savestate
if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD)
{
//handle moviefile mismatch
if(tempMovieData.guid != currMovieData.guid)
{
//mbg 8/18/08 - this code can be used to turn the error message into an OK/CANCEL
#ifdef WIN32
//std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
//extern HWND pwindow;
//int result = MessageBox(pwindow,msg.c_str(),"Error loading savestate",MB_OKCANCEL);
//if(result == IDCANCEL)
// return false;
#else
FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
return false;
#endif
}
closeRecordingMovie();
if(movie_readonly)
{
//if the frame counter is longer than our current movie, then error
if(currFrameCounter > (int)currMovieData.records.size())
{
FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
return false;
}
movieMode = MOVIEMODE_PLAY;
}
else
{
//truncate before we copy, just to save some time
tempMovieData.truncateAt(currFrameCounter);
currMovieData = tempMovieData;
#ifdef _S9XLUA_H
if(!FCEU_LuaRerecordCountSkip())
currRerecordCount++;
#endif
currMovieData.rerecordCount = currRerecordCount;
openRecordingMovie(curMovieFilename);
currMovieData.dump(osRecordingMovie, false);
movieMode = MOVIEMODE_RECORD;
}
}
load_successful = true;
//// Maximus: Show the last input combination entered from the
//// movie within the state
//if(current!=0) // <- mz: only if playing or recording a movie
// memcpy(&cur_input_display, joop, 4);
return true;
}
//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
void FCEUI_SaveMovie(const char *fname, std::wstring author, int flag, std::string sramfname, const DateTime &rtcstart)
{
//if(!FCEU_IsValidUI(FCEUI_RECORDMOVIE))
// return;
assert(fname);
FCEUI_StopMovie();
openRecordingMovie(fname);
currFrameCounter = 0;
//LagCounterReset();
currMovieData = MovieData();
currMovieData.guid.newGuid();
if(author != L"") currMovieData.comments.push_back(L"author " + author);
currMovieData.romChecksum = gameInfo.crc;
currMovieData.romSerial = gameInfo.ROMserial;
currMovieData.romFilename = path.GetRomName();
currMovieData.rtcStart = rtcstart;
// reset firmware (some games can write to it)
if (CommonSettings.UseExtFirmware == false)
{
NDS_CreateDummyFirmware(&CommonSettings.InternalFirmConf);
}
NDS_Reset();
//todo ?
//poweron(true);
//else
// MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);
if(flag == 1)
EMUFILE::readAllBytes(&currMovieData.sram, sramfname);
//we are going to go ahead and dump the header. from now on we will only be appending frames
currMovieData.dump(osRecordingMovie, false);
currFrameCounter=0;
lagframecounter=0;
LagFrameFlag=0;
lastLag=0;
TotalLagFrames=0;
movieMode = MOVIEMODE_RECORD;
movie_readonly = false;
currRerecordCount = 0;
MMU_new.backupDevice.movie_mode();
if(currMovieData.sram.size() != 0)
{
bool success = MovieData::loadSramFrom(&currMovieData.sram);
if(!success) return;
}
driver->USR_InfoMessage("Movie recording started.");
}
//yuck... another custom text parser.
bool LoadFM2(MovieData& movieData, EMUFILE* fp, int size, bool stopAfterHeader)
{
//TODO - start with something different. like 'desmume movie version 1"
int curr = fp->ftell();
//movie must start with "version 1"
char buf[9];
curr = fp->ftell();
fp->fread(buf,9);
fp->fseek(curr, SEEK_SET);
// if(fp->fail()) return false;
if(memcmp(buf,"version 1",9))
return false;
std::string key,value;
enum {
NEWLINE, KEY, SEPARATOR, VALUE, RECORD, COMMENT
} state = NEWLINE;
bool bail = false;
for(;;)
{
bool iswhitespace, isrecchar, isnewline;
int c;
if(size--<=0) goto bail;
c = fp->fgetc();
if(c == -1)
goto bail;
iswhitespace = (c==' '||c=='\t');
isrecchar = (c=='|');
isnewline = (c==10||c==13);
if(isrecchar && movieData.binaryFlag && !stopAfterHeader)
{
LoadFM2_binarychunk(movieData, fp, size);
return true;
}
switch(state)
{
case NEWLINE:
if(isnewline) goto done;
if(iswhitespace) goto done;
if(isrecchar)
goto dorecord;
//must be a key
key = "";
value = "";
goto dokey;
break;
case RECORD:
{
dorecord:
if (stopAfterHeader) return true;
int currcount = movieData.records.size();
movieData.records.resize(currcount+1);
int preparse = fp->ftell();
movieData.records[currcount].parse(&movieData, fp);
int postparse = fp->ftell();
size -= (postparse-preparse);
state = NEWLINE;
break;
}
case KEY:
dokey: //dookie
state = KEY;
if(iswhitespace) goto doseparator;
if(isnewline) goto commit;
key += c;
break;
case SEPARATOR:
doseparator:
state = SEPARATOR;
if(isnewline) goto commit;
if(!iswhitespace) goto dovalue;
break;
case VALUE:
dovalue:
state = VALUE;
if(isnewline) goto commit;
value += c;
break;
case COMMENT:
default:
break;
}
goto done;
bail:
bail = true;
if(state == VALUE) goto commit;
goto done;
commit:
movieData.installValue(key,value);
state = NEWLINE;
done: ;
if(bail) break;
}
return true;
}
/**
* The main loop for the SDL.
*/
int main(int argc, char *argv[])
{
// this is a hackish check for the --help arguemnts
// these are normally processed by the config parser, but SDL_Init
// must be run before the config parser: so if even SDL_Init fails,
// these six lines will still print the help output
if(argc > 1)
{
if(!strcmp(argv[1], "--help") || !strcmp(argv[1],"-h"))
{
ShowUsage(argv[0]);
return 0;
}
}
int error, frameskip;
FCEUD_Message("Starting " FCEU_NAME_AND_VERSION "...\n");
#ifdef WIN32
/* Taken from win32 sdl_main.c */
SDL_SetModuleHandle(GetModuleHandle(NULL));
#endif
/* SDL_INIT_VIDEO Needed for (joystick config) event processing? */
if(SDL_Init(SDL_INIT_VIDEO)) {
printf("Could not initialize SDL: %s.\n", SDL_GetError());
return(-1);
}
#ifdef OPENGL
SDL_GL_LoadLibrary(0);
#endif
// Initialize the configuration system
g_config = InitConfig();
if(!g_config) {
SDL_Quit();
return -1;
}
// initialize the infrastructure
error = FCEUI_Initialize();
if(error != 1) {
ShowUsage(argv[0]);
SDL_Quit();
return -1;
}
// check for --help or -h and display usage; also check for --nogui
for(int i=0; i<argc;i++)
{
if(strcmp(argv[i], "--help") == 0 || strcmp(argv[i], "-h") == 0)
{
ShowUsage(argv[0]);
SDL_Quit();
return 0;
}
#ifdef _GTK
else if(strcmp(argv[i], "--nogui") == 0)
{
noGui = 1;
argv[i] = "";
}
#endif
}
int romIndex = g_config->parse(argc, argv);
// This is here so that a default fceux.cfg will be created on first
// run, even without a valid ROM to play.
// Unless, of course, there's actually --no-config given
// mbg 8/23/2008 - this is also here so that the inputcfg routines can have
// a chance to dump the new inputcfg to the fceux.cfg in case you didnt
// specify a rom filename
g_config->getOption("SDL.NoConfig", &noconfig);
if (!noconfig)
g_config->save();
std::string s;
g_config->getOption("SDL.InputCfg", &s);
if(s.size() != 0)
{
InitVideo(GameInfo);
InputCfg(s);
}
// set the FAMICOM PAD 2 Mic thing
{
int t;
g_config->getOption("SDL.Input.FamicomPad2.EnableMic", &t);
if(t)
replaceP2StartWithMicrophone = t;
}
// update the input devices
UpdateInput(g_config);
// check for a .fcm file to convert to .fm2
g_config->getOption ("SDL.FCMConvert", &s);
g_config->setOption ("SDL.FCMConvert", "");
if (!s.empty())
{
int okcount = 0;
std::string infname = s.c_str();
// produce output filename
std::string outname;
size_t dot = infname.find_last_of (".");
if (dot == std::string::npos)
outname = infname + ".fm2";
else
outname = infname.substr(0,dot) + ".fm2";
MovieData md;
EFCM_CONVERTRESULT result = convert_fcm (md, infname);
if (result == FCM_CONVERTRESULT_SUCCESS) {
okcount++;
// *outf = new EMUFILE;
EMUFILE_FILE* outf = FCEUD_UTF8_fstream (outname, "wb");
md.dump (outf,false);
delete outf;
FCEUD_Message ("Your file has been converted to FM2.\n");
}
else {
FCEUD_Message ("Something went wrong while converting your file...\n");
}
DriverKill();
SDL_Quit();
return 0;
}
// If x/y res set to 0, store current display res in SDL.LastX/YRes
int yres, xres;
g_config->getOption("SDL.XResolution", &xres);
g_config->getOption("SDL.YResolution", &yres);
#if SDL_VERSION_ATLEAST(2, 0, 0)
// TODO _ SDL 2.0
#else
const SDL_VideoInfo* vid_info = SDL_GetVideoInfo();
if(xres == 0)
{
if(vid_info != NULL)
{
g_config->setOption("SDL.LastXRes", vid_info->current_w);
}
else
{
g_config->setOption("SDL.LastXRes", 512);
}
}
else
{
g_config->setOption("SDL.LastXRes", xres);
}
if(yres == 0)
{
if(vid_info != NULL)
{
g_config->setOption("SDL.LastYRes", vid_info->current_h);
}
else
{
g_config->setOption("SDL.LastYRes", 448);
}
}
else
{
g_config->setOption("SDL.LastYRes", yres);
}
#endif
int autoResume;
g_config->getOption("SDL.AutoResume", &autoResume);
if(autoResume)
{
AutoResumePlay = true;
}
else
{
AutoResumePlay = false;
}
// check to see if recording HUD to AVI is enabled
int rh;
g_config->getOption("SDL.RecordHUD", &rh);
if( rh == 0)
FCEUI_SetAviEnableHUDrecording(true);
else
FCEUI_SetAviEnableHUDrecording(false);
// check to see if movie messages are disabled
int mm;
g_config->getOption("SDL.MovieMsg", &mm);
if( mm == 0)
FCEUI_SetAviDisableMovieMessages(true);
else
FCEUI_SetAviDisableMovieMessages(false);
// check for a .fm2 file to rip the subtitles
g_config->getOption("SDL.RipSubs", &s);
g_config->setOption("SDL.RipSubs", "");
if (!s.empty())
{
MovieData md;
std::string infname;
infname = s.c_str();
FCEUFILE *fp = FCEU_fopen(s.c_str(), 0, "rb", 0);
// load the movie and and subtitles
extern bool LoadFM2(MovieData&, EMUFILE*, int, bool);
LoadFM2(md, fp->stream, INT_MAX, false);
LoadSubtitles(md); // fill subtitleFrames and subtitleMessages
delete fp;
// produce .srt file's name and open it for writing
std::string outname;
size_t dot = infname.find_last_of (".");
if (dot == std::string::npos)
outname = infname + ".srt";
else
outname = infname.substr(0,dot) + ".srt";
FILE *srtfile;
srtfile = fopen(outname.c_str(), "w");
if (srtfile != NULL)
{
extern std::vector<int> subtitleFrames;
extern std::vector<std::string> subtitleMessages;
float fps = (md.palFlag == 0 ? 60.0988 : 50.0069); // NTSC vs PAL
float subduration = 3; // seconds for the subtitles to be displayed
for (int i = 0; i < subtitleFrames.size(); i++)
{
fprintf(srtfile, "%i\n", i+1); // starts with 1, not 0
double seconds, ms, endseconds, endms;
seconds = subtitleFrames[i]/fps;
if (i+1 < subtitleFrames.size()) // there's another subtitle coming after this one
{
if (subtitleFrames[i+1]-subtitleFrames[i] < subduration*fps) // avoid two subtitles at the same time
{
endseconds = (subtitleFrames[i+1]-1)/fps; // frame x: subtitle1; frame x+1 subtitle2
} else {
endseconds = seconds+subduration;
}
} else {
endseconds = seconds+subduration;
}
ms = modf(seconds, &seconds);
endms = modf(endseconds, &endseconds);
// this is just beyond ugly, don't show it to your kids
fprintf(srtfile,
"%02.0f:%02d:%02d,%03d --> %02.0f:%02d:%02d,%03d\n", // hh:mm:ss,ms --> hh:mm:ss,ms
floor(seconds/3600), (int)floor(seconds/60 ) % 60, (int)floor(seconds) % 60, (int)(ms*1000),
floor(endseconds/3600), (int)floor(endseconds/60) % 60, (int)floor(endseconds) % 60, (int)(endms*1000));
fprintf(srtfile, "%s\n\n", subtitleMessages[i].c_str()); // new line for every subtitle
}
fclose(srtfile);
printf("%d subtitles have been ripped.\n", (int)subtitleFrames.size());
} else {
FCEUD_Message("Couldn't create output srt file...\n");
}
DriverKill();
SDL_Quit();
return 0;
}
// if we're not compiling w/ the gui, exit if a rom isn't specified
#ifndef _GTK
if(romIndex <= 0) {
ShowUsage(argv[0]);
FCEUD_Message("\nError parsing command line arguments\n");
SDL_Quit();
return -1;
}
#endif
// update the emu core
UpdateEMUCore(g_config);
#ifdef CREATE_AVI
g_config->getOption("SDL.VideoLog", &s);
g_config->setOption("SDL.VideoLog", "");
if(!s.empty())
{
NESVideoSetVideoCmd(s.c_str());
LoggingEnabled = 1;
g_config->getOption("SDL.MuteCapture", &mutecapture);
} else {
mutecapture = 0;
}
#endif
{
int id;
g_config->getOption("SDL.InputDisplay", &id);
extern int input_display;
input_display = id;
// not exactly an id as an true/false switch; still better than creating another int for that
g_config->getOption("SDL.SubtitleDisplay", &id);
extern int movieSubtitles;
movieSubtitles = id;
}
// load the hotkeys from the config life
setHotKeys();
#ifdef _GTK
if(noGui == 0)
{
gtk_init(&argc, &argv);
InitGTKSubsystem(argc, argv);
while(gtk_events_pending())
gtk_main_iteration_do(FALSE);
}
#endif
if(romIndex >= 0)
{
// load the specified game
error = LoadGame(argv[romIndex]);
if(error != 1) {
DriverKill();
SDL_Quit();
return -1;
}
g_config->setOption("SDL.LastOpenFile", argv[romIndex]);
g_config->save();
}
// movie playback
g_config->getOption("SDL.Movie", &s);
g_config->setOption("SDL.Movie", "");
if (s != "")
{
if(s.find(".fm2") != std::string::npos || s.find(".fm3") != std::string::npos)
{
static int pauseframe;
g_config->getOption("SDL.PauseFrame", &pauseframe);
g_config->setOption("SDL.PauseFrame", 0);
FCEUI_printf("Playing back movie located at %s\n", s.c_str());
FCEUI_LoadMovie(s.c_str(), false, pauseframe ? pauseframe : false);
}
else
{
FCEUI_printf("Sorry, I don't know how to play back %s\n", s.c_str());
}
}
int periodic_saves;
int save_state;
g_config->getOption("SDL.PeriodicSaves", &periodic_saves);
g_config->getOption("SDL.AutoSaveState", &save_state);
if(periodic_saves && save_state < 10 && save_state >= 0){
FCEUI_SelectState(save_state, 0);
} else {
periodic_saves = 0;
}
#ifdef _S9XLUA_H
// load lua script if option passed
g_config->getOption("SDL.LuaScript", &s);
g_config->setOption("SDL.LuaScript", "");
if (s != "")
{
FCEU_LoadLuaCode(s.c_str());
}
#endif
{
int id;
g_config->getOption("SDL.NewPPU", &id);
if (id)
newppu = 1;
}
g_config->getOption("SDL.Frameskip", &frameskip);
// loop playing the game
#ifdef _GTK
if(noGui == 0)
{
while(1)
{
if(GameInfo)
DoFun(frameskip, periodic_saves);
else
SDL_Delay(1);
while(gtk_events_pending())
gtk_main_iteration_do(FALSE);
}
}
else
{
while(GameInfo)
DoFun(frameskip, periodic_saves);
}
#else
while(GameInfo)
{
DoFun(frameskip, periodic_saves);
}
#endif
CloseGame();
// exit the infrastructure
FCEUI_Kill();
SDL_Quit();
return 0;
}
//the main interaction point between the emulator and the movie system.
//either dumps the current joystick state or loads one state from the movie
void FCEUMOV_AddInputState()
{
#if defined(WIN32) && !defined(DINGUX)
if (movieMode == MOVIEMODE_TASEDITOR)
{
// if movie length is less or equal to currFrame, pad it with empty frames
if (((int)currMovieData.records.size() - 1) < (currFrameCounter + 1))
currMovieData.insertEmpty(-1, (currFrameCounter + 1) - ((int)currMovieData.records.size() - 1));
MovieRecord* mr = &currMovieData.records[currFrameCounter];
if (isTaseditorRecording())
{
// record commands and buttons
mr->commands |= _currCommand;
joyports[0].log(mr);
joyports[1].log(mr);
recordInputByTaseditor();
}
// replay buttons
joyports[0].load(mr);
joyports[1].load(mr);
// replay commands
if (mr->command_power())
PowerNES();
if (mr->command_reset())
ResetNES();
if (mr->command_fds_insert())
FCEU_FDSInsert();
if (mr->command_fds_select())
FCEU_FDSSelect();
if (mr->command_vs_insertcoin())
FCEU_VSUniCoin();
_currCommand = 0;
} else
#endif
if (movieMode == MOVIEMODE_PLAY)
{
//stop when we run out of frames
if (currFrameCounter >= (int)currMovieData.records.size())
{
FinishPlayback();
//tell all drivers to poll input and set up their logical states
for(int port=0;port<2;port++)
joyports[port].driver->Update(port,joyports[port].ptr,joyports[port].attrib);
portFC.driver->Update(portFC.ptr,portFC.attrib);
} else
{
MovieRecord* mr = &currMovieData.records[currFrameCounter];
//reset and power cycle if necessary
if(mr->command_power())
PowerNES();
if(mr->command_reset())
ResetNES();
if(mr->command_fds_insert())
FCEU_FDSInsert();
if(mr->command_fds_select())
FCEU_FDSSelect();
if (mr->command_vs_insertcoin())
FCEU_VSUniCoin();
joyports[0].load(mr);
joyports[1].load(mr);
}
//if we are on the last frame, then pause the emulator if the player requested it
if (currFrameCounter == currMovieData.records.size()-1)
{
if(FCEUD_PauseAfterPlayback())
{
FCEUI_ToggleEmulationPause();
}
}
//pause the movie at a specified frame
if (FCEUMOV_ShouldPause() && FCEUI_EmulationPaused()==0)
{
FCEUI_ToggleEmulationPause();
FCEU_DispMessage("Paused at specified movie frame",0);
}
} else if (movieMode == MOVIEMODE_RECORD)
{
MovieRecord mr;
joyports[0].log(&mr);
joyports[1].log(&mr);
mr.commands = _currCommand;
_currCommand = 0;
//Adelikat: in normal mode, this is done at the time of loading a savestate in read+write mode
//If the user chooses it can be delayed to here
if (fullSaveStateLoads && (currFrameCounter < (int)currMovieData.records.size()))
currMovieData.truncateAt(currFrameCounter);
mr.dump(&currMovieData, osRecordingMovie,currMovieData.records.size()); // to disk
currMovieData.records.push_back(mr);
}
currFrameCounter++;
extern uint8 joy[4];
memcpy(&cur_input_display,joy,4);
}
//yuck... another custom text parser.
bool LoadFM2(MovieData& movieData, EMUFILE* fp, int size, bool stopAfterHeader)
{
// if there's no "binary" tag in the movie header, consider it as a movie in text format
movieData.binaryFlag = false;
// Non-TASEditor projects consume until EOF
movieData.loadFrameCount = -1;
std::ios::pos_type curr = fp->ftell();
if (!stopAfterHeader)
{
// first, look for an fcm signature
char fcmbuf[3];
fp->fread(fcmbuf,3);
fp->fseek(curr,SEEK_SET);
if(!strncmp(fcmbuf,"FCM",3)) {
FCEU_PrintError("FCM File format is no longer supported. Please use Tools > Convert FCM");
return false;
}
}
//movie must start with "version 3"
char buf[9];
curr = fp->ftell();
fp->fread(buf,9);
fp->fseek(curr,SEEK_SET);
if(fp->fail()) return false;
if(memcmp(buf,"version 3",9))
return false;
std::string key,value;
enum {
NEWLINE, KEY, SEPARATOR, VALUE, RECORD, COMMENT, SUBTITLE
} state = NEWLINE;
bool bail = false;
bool iswhitespace, isrecchar, isnewline;
int c;
for(;;)
{
if(size--<=0) goto bail;
c = fp->fgetc();
if(c == -1)
goto bail;
iswhitespace = (c==' '||c=='\t');
isrecchar = (c=='|');
isnewline = (c==10||c==13);
if(isrecchar && movieData.binaryFlag && !stopAfterHeader)
{
LoadFM2_binarychunk(movieData, fp, size);
return true;
} else if (isnewline && movieData.loadFrameCount == movieData.records.size())
// exit prematurely if loaded the specified amound of records
return true;
switch(state)
{
case NEWLINE:
if(isnewline) goto done;
if(iswhitespace) goto done;
if(isrecchar)
goto dorecord;
//must be a key
key = "";
value = "";
goto dokey;
break;
case RECORD:
{
dorecord:
if (stopAfterHeader) return true;
int currcount = movieData.records.size();
movieData.records.resize(currcount+1);
int preparse = fp->ftell();
movieData.records[currcount].parse(&movieData, fp);
int postparse = fp->ftell();
size -= (postparse-preparse);
state = NEWLINE;
break;
}
case KEY:
dokey: //dookie
state = KEY;
if(iswhitespace) goto doseparator;
if(isnewline) goto commit;
key += c;
break;
case SEPARATOR:
doseparator:
state = SEPARATOR;
if(isnewline) goto commit;
if(!iswhitespace) goto dovalue;
break;
case VALUE:
dovalue:
state = VALUE;
if(isnewline) goto commit;
value += c;
}
goto done;
bail:
bail = true;
if(state == VALUE) goto commit;
goto done;
commit:
movieData.installValue(key,value);
state = NEWLINE;
done: ;
if(bail) break;
}
return true;
}
bool FCEUMOV_ReadState(EMUFILE* is, uint32 size)
{
load_successful = false;
if (!movie_readonly)
{
if (currMovieData.loadFrameCount >= 0)
{
#if defined(WIN32) && !defined(DINGUX)
int result = MessageBox(hAppWnd, "This movie is a TAS Editor project file.\nIt can be modified in TAS Editor only.\n\nOpen it in TAS Editor now?", "Movie Replay", MB_YESNO);
if (result == IDYES)
mustEngageTaseditor = true;
#else
FCEUI_printf("This movie is a TAS Editor project file! It can be modified in TAS Editor only.\nMovie is now Read-Only.\n");
#endif
movie_readonly = true;
}
if (FCEU_isFileInArchive(curMovieFilename))
{
//a little rule: cant load states in read+write mode with a movie from an archive.
//so we are going to switch it to readonly mode in that case
FCEU_PrintError("Cannot loadstate in Read+Write with movie from archive. Movie is now Read-Only.");
movie_readonly = true;
}
}
MovieData tempMovieData = MovieData();
std::ios::pos_type curr = is->ftell();
if(!LoadFM2(tempMovieData, is, size, false)) {
is->fseek((uint32)curr+size,SEEK_SET);
extern bool FCEU_state_loading_old_format;
if(FCEU_state_loading_old_format) {
if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_FINISHED) {
//FCEUI_StopMovie(); //No reason to stop the movie, nothing destructive has happened yet.
FCEU_PrintError("You have tried to use an old savestate while playing a movie. This is unsupported (since the old savestate has old-format movie data in it which can't be converted on the fly)");
}
}
return false;
}
//----------------
//complex TAS logic for loadstate
//fully conforms to the savestate logic documented in the Laws of TAS
//http://tasvideos.org/LawsOfTAS/OnSavestates.html
//----------------
/*
Playback or Recording + Read-only
* Check that GUID of movie and savestate-movie must match or else error
o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
+ failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted if user has backup savstates enabled else stop movie
* Check that movie and savestate-movie are in same timeline. If not then this is a wrong timeline error.
o on error: a message informing that the savestate doesn't belong to this movie
+ failstate: loadstate attempt canceled, movie can resume as if not attempted if user has backup savestates enabled else stop movie
* Check that savestate-movie is not greater than movie. If it's greater then this is a future event error and is not allowed in read-only
o on error: message informing that the savestate is from a frame after the last frame of the movie
+ failstate - loadstate attempt cancelled, movie can resume if user has backup savesattes enabled, else stop movie
* Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate and is not allowed in read-only
o on error: message informing that the savestate is from a frame after the last frame of the savestated movie
+ failstate - loadstate attempt cancelled, movie can resume if user has backup savesattes enabled, else stop movie
* All error checks have passed, state will be loaded
* Movie contained in the savestate will be discarded
* Movie is now in Playback mode
Playback, Recording + Read+write
* Check that GUID of movie and savestate-movie must match or else error
o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
+ failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted (stop movie if resume fails)canceled, movie can resume if backup savestates enabled else stopmovie
* Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate
o on post-movie: See post-movie event section.
* savestate passed all error checks and will now be loaded in its entirety and replace movie (note: there will be no truncation yet)
* current framecount will be set to savestate framecount
* on the next frame of input, movie will be truncated to framecount
o (note: savestate-movie can be a future event of the movie timeline, or a completely new timeline and it is still allowed)
* Rerecord count of movie will be incremented
* Movie is now in record mode
Post-movie savestate event
* Whan a savestate is loaded and is determined that the savestate-movie length is less than the savestate framecount then it is a post-movie savestate. These occur when a savestate was made during Movie Finished mode.
* If read+write, the entire savestate movie will be loaded and replace current movie.
* If read-only, the savestate movie will be discarded
* Mode will be switched to Move Finished
* Savestate will be loaded
* Current framecount changes to savestate framecount
* User will have control of input as if Movie inactive mode
*/
if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_FINISHED)
{
//handle moviefile mismatch
if(tempMovieData.guid != currMovieData.guid)
{
//mbg 8/18/08 - this code can be used to turn the error message into an OK/CANCEL
#if defined(WIN32) && !defined(DINGUX)
std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
extern HWND pwindow;
int result = MessageBox(pwindow,msg.c_str(),"Error loading savestate",MB_OKCANCEL);
if(result == IDCANCEL)
{
if (!backupSavestates) //If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
{
FCEU_PrintError("Unable to restore backup, movie playback stopped.");
FCEUI_StopMovie();
}
return false;
}
#else
if (!backupSavestates) //If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
{
FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\nUnable to restore backup, movie playback stopped.\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
FCEUI_StopMovie();
}
else
FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
return false;
#endif
}
closeRecordingMovie();
if (movie_readonly)
{
// currFrameCounter at this point represents the savestate framecount
int frame_of_mismatch = CheckTimelines(tempMovieData, currMovieData);
if (frame_of_mismatch >= 0)
{
// Wrong timeline, do apprioriate logic here
if (!backupSavestates) //If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
{
FCEU_PrintError("Error: Savestate not in the same timeline as movie!\nFrame %d branches from current timeline\nUnable to restore backup, movie playback stopped.", frame_of_mismatch);
FCEUI_StopMovie();
} else
FCEU_PrintError("Error: Savestate not in the same timeline as movie!\nFrame %d branches from current timeline", frame_of_mismatch);
return false;
} else if (movieMode == MOVIEMODE_FINISHED
&& currFrameCounter > (int)currMovieData.records.size()
&& currMovieData.records.size() == tempMovieData.records.size())
{
// special case (in MOVIEMODE_FINISHED mode)
// allow loading post-movie savestates that were made after finishing current movie
} else if (currFrameCounter > (int)currMovieData.records.size())
{
// this is future event state, don't allow it
//TODO: turn frame counter to red to get attention
if (!backupSavestates) //If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
{
FCEU_PrintError("Error: Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.\nUnable to restore backup, movie playback stopped.", currFrameCounter, currMovieData.records.size()-1);
FCEUI_StopMovie();
} else
FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
return false;
} else if (currFrameCounter > (int)tempMovieData.records.size())
{
// this is post-movie savestate, don't allow it
//TODO: turn frame counter to red to get attention
if (!backupSavestates) //If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
{
FCEU_PrintError("Error: Savestate is from a frame (%d) after the final frame in the savestated movie (%d). This is not permitted.\nUnable to restore backup, movie playback stopped.", currFrameCounter, tempMovieData.records.size()-1);
FCEUI_StopMovie();
} else
FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the savestated movie (%d). This is not permitted.", currFrameCounter, tempMovieData.records.size()-1);
return false;
} else
{
// Finally, this is a savestate file for this movie
movieMode = MOVIEMODE_PLAY;
}
} else
{
//Read+Write mode
if (currFrameCounter > (int)tempMovieData.records.size())
{
//This is a post movie savestate, handle it differently
//Replace movie contents but then switch to movie finished mode
currMovieData = tempMovieData;
openRecordingMovie(curMovieFilename);
currMovieData.dump(osRecordingMovie, false/*currMovieData.binaryFlag*/);
FinishPlayback();
} else
{
//truncate before we copy, just to save some time, unless the user selects a full copy option
if (!fullSaveStateLoads)
//we can only assume this here since we have checked that the frame counter is not greater than the movie data
tempMovieData.truncateAt(currFrameCounter);
currMovieData = tempMovieData;
FCEUMOV_IncrementRerecordCount();
openRecordingMovie(curMovieFilename);
currMovieData.dump(osRecordingMovie, false/*currMovieData.binaryFlag*/);
movieMode = MOVIEMODE_RECORD;
}
}
}
load_successful = true;
return true;
}
/*
* load and write a batch of users
*/
void IBBL_LargeFile::append_user_batch(int_set::iterator& batch_start,
int_set::iterator& batch_end,
int& offset,
ofstream& user_offset_file,
ofstream& user_file)
{
if (batch_start == batch_end)
return;
int_ur_mmap user_map;
/* go through every movie file */
MovieData d;
movie_rating r;
user_rating u;
int uid;
for (int id = 1; id <= NUM_MOVIES; ++id)
{
// load the movie
d.load_from_binary(this, id);
// go through each user
for (int_set::iterator itr = batch_start; itr != batch_end; ++itr)
{
uid = *itr;
if (d.find_rating_by_id(uid, &r))
{
// convert the rating to a user rating and add to that user's list
u.rating = r.rating;
u.movie_id = id;
u.year = r.year;
u.month = r.month;
u.day = r.day;
user_map.insert(make_pair(uid, u));
}
}
}
/* save each user to the file */
int num_user_ratings;
int_ur_mmap::iterator begin, end;
for (int_set::iterator itr = batch_start; itr != batch_end; ++itr)
{
uid = *itr;
pair<int_ur_mmap::iterator,int_ur_mmap::iterator> ret = user_map.equal_range(uid);
// write the number of ratings
num_user_ratings = user_map.count(uid);
user_file.write((char*)&num_user_ratings, 4);
// write and increment the offset
user_offset_file.write((char*)&uid, 4);
user_offset_file.write((char*)&offset, 4);
offset += 4 + num_user_ratings * sizeof(user_rating);
// write each rating
begin = ret.first;
end = ret.second;
for (int_ur_mmap::iterator u_itr = begin; u_itr != end; ++u_itr)
{
u = u_itr->second;
user_file.write((char*)&u, sizeof(user_rating));
}
}
}
bool mov_loadstate(std::istream* is, int size)//std::istream* is
{
load_successful = false;
int cookie;
if(read32lemov(&cookie,is) != 1) return false;
if(cookie == kNOMO)
return true;
else if(cookie != kMOVI)
return false;
size -= 4;
if (!movie_readonly && autoMovieBackup && freshMovie) //If auto-backup is on, movie has not been altered this session and the movie is in read+write mode
MakeBackupMovie(false); //Backup the movie before the contents get altered, but do not display messages
MovieData tempMovieData = MovieData();
std::ios::pos_type curr = is->tellg();
if(!LoadMC2(tempMovieData, is, size, false))
return false;
//----------------
//complex TAS logic for loadstate
//fully conforms to the savestate logic documented in the Laws of TAS
//http://tasvideos.org/LawsOfTAS/OnSavestates.html
//----------------
/*
Playback or Recording + Read-only
* Check that GUID of movie and savestate-movie must match or else error
o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
+ failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted if user has backup savstates enabled else stop movie
* Check that movie and savestate-movie are in same timeline. If not then this is a wrong timeline error.
o on error: a message informing that the savestate doesn't belong to this movie
+ failstate: loadstate attempt canceled, movie can resume as if not attempted if user has backup savestates enabled else stop movie
* Check that savestate-movie is not greater than movie. If not then this is a future event error and is not allowed in read-only
o on error: message informing that the savestate is from a frame after the last frame of the movie
+ failstate - loadstate attempt cancelled, movie can resume if user has backup savesattes enabled, else stop movie
* Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate
o on post-movie: See post-movie event section.
* All error checks have passed, state will be loaded
* Movie contained in the savestate will be discarded
* Movie is now in Playback mode
Playback, Recording + Read+write
* Check that GUID of movie and savestate-movie must match or else error
o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
+ failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted (stop movie if resume fails)canceled, movie can resume if backup savestates enabled else stopmovie
* Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate
o on post-movie: See post-movie event section.
* savestate passed all error checks and will now be loaded in its entirety and replace movie (note: there will be no truncation yet)
* current framecount will be set to savestate framecount
* on the next frame of input, movie will be truncated to framecount
o (note: savestate-movie can be a future event of the movie timeline, or a completely new timeline and it is still allowed)
* Rerecord count of movie will be incremented
* Movie is now in record mode
Post-movie savestate event
* Whan a savestate is loaded and is determined that the savestate-movie length is less than the savestate framecount then it is a post-movie savestate. These occur when a savestate was made during Movie Finished mode.
* If read+write, the entire savestate movie will be loaded and replace current movie.
* If read-only, the savestate movie will be discarded
* Mode will be switched to Move Finished
* Savestate will be loaded
* Current framecount changes to savestate framecount
* User will have control of input as if Movie inactive mode
*/
if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD)
{
//handle moviefile mismatch
/* if(tempMovieData.guid != currMovieData.guid)
{
//mbg 8/18/08 - this code can be used to turn the error message into an OK/CANCEL
#ifdef WIN32
//std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
//extern HWND pwindow;
//int result = MessageBox(pwindow,msg.c_str(),"Error loading savestate",MB_OKCANCEL);
//if(result == IDCANCEL)
// return false;
#else
DisplayMessage("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
return false;
#endif
}*/
closeRecordingMovie();
if(movie_readonly)
{
//-------------------------------------------------------------
//this code would reload the movie from disk. allegedly it is helpful to hexers, but
//it is way too slow with dsm format. so it is only here as a reminder, and in case someone
//wants to play with it
//-------------------------------------------------------------
//{
// fstream fs (curMovieFilename);
// if(!LoadMC2(tempMovieData, &fs, INT_MAX, false))
// {
// MDFN_PrintError("Failed to reload DSM after loading savestate");
// }
// fs.close();
// currMovieData = tempMovieData;
//}
//-------------------------------------------------------------
//if the frame counter is longer than our current movie, then error
if(currFrameCounter > (int)currMovieData.records.size())
{
MDFN_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
return false;
}
movieMode = MOVIEMODE_PLAY;
}
else
{
//truncate before we copy, just to save some time
tempMovieData.truncateAt(currFrameCounter);
currMovieData = tempMovieData;
currRerecordCount++;
currMovieData.rerecordCount = currRerecordCount;
openRecordingMovie(curMovieFilename);
currMovieData.dump(osRecordingMovie, false);
movieMode = MOVIEMODE_RECORD;
}
}
load_successful = true;
freshMovie = false;
//// Maximus: Show the last input combination entered from the
//// movie within the state
//if(current!=0) // <- mz: only if playing or recording a movie
// memcpy(&cur_input_display, joop, 4);
return true;
}
