void setup() {
Serial.begin(9600);
//while(!Serial.available()) Particle.process();
//nextion.setBrightness(DISPLAY_BRIGHTNESS);
/* BUTTON - WILL BE REMOVED LATER */
pinMode(D4, INPUT_PULLUP);
// Setup button timers (all in milliseconds / ms)
// (These are default if not set, but changeable for convenience)
button1.debounceTime = 20; // Debounce timer in ms
button1.multiclickTime = 250; // Time limit for multi clicks
button1.longClickTime = 1000; // time until "held-down clicks" register
// Subscribing for sensor data
Particle.subscribe("Outside_Temperature", dataHandler, MY_DEVICES);
Particle.subscribe("Outside_Humidity", dataHandler, MY_DEVICES);
// Subscribing for weather data API call
Particle.subscribe(HOOK_RESP, processWeatherData, MY_DEVICES);
/* Set the baudrate which is for debug and communicate with Nextion screen. */
nexInit();
/* Register the pop event callback functions for the button components. */
b0.attachPop(b0PopCallback);
b1.attachPop(b1PopCallback);
b2.attachPop(b2PopCallback);
bt0.attachPop(bt0PopCallback, &bt0);
bt1.attachPop(bt1PopCallback, &bt1);
n0.attachPop(n0PopCallback);
n1.attachPop(n1PopCallback);
bu0.attachPop(bu0PopCallback);
u0.attachPop(u0PopCallback);
// See if this EEPROM has saved data
if(EEPROM.read(0)==117) {
// Set language
if(EEPROM.read(1)==1) {
langCode = 1;
bt0.setValue((uint32_t)langCode);
}
else {
langCode = 0;
}
// Set temperature scale
if(EEPROM.read(2)==1) {
tempScale = 1;
bt1.setValue((uint32_t)tempScale);
}
else
tempScale = 0;
} else {
// Initialize
EEPROM.write(0, 117);
// Language
EEPROM.write(1, 0);
// Temperature scale
EEPROM.write(2, 0);
}
// Set timezone
Time.zone(TIMEZONE_OFFSET);
// Set current day of the week
currentWeekday = Time.weekday();
renderScreen(HOME_SCREEN);
}
void lcd_init() {
HAL::delayMilliseconds(2000);
for (uint8_t i = 0; i < 10; i++) {
NextionON = nexInit();
if (NextionON) break;
delay(1000);
}
if (!NextionON) {
ECHO_LM(DB, "Nextion LCD not connected!");
}
else {
ECHO_LM(DB, "Nextion LCD connected!");
Pstart.attachPop(ExitPopCallback);
Exit1.attachPop(ExitPopCallback);
Exit3.attachPop(ExitPopCallback);
#if ENABLED(NEXTION_GFX)
gfx.color_set(VC_AXIS + X_AXIS, 63488);
gfx.color_set(VC_AXIS + Y_AXIS, 2016);
gfx.color_set(VC_AXIS + Z_AXIS, 31);
gfx.color_set(VC_MOVE, 2047);
gfx.color_set(VC_TOOL, 65535);
#endif
#if ENABLED(SDSUPPORT)
MSD1.attachPop(setpageSDPopCallback);
MSD3.attachPop(setpageSDPopCallback);
MSD5.attachPop(setpageSDPopCallback);
MSD6.attachPop(setpageSDPopCallback);
sdlist.attachPop(sdlistPopCallback);
ScrollUp.attachPop(sdlistPopCallback);
ScrollDown.attachPop(sdlistPopCallback);
Exit2.attachPop(ExitPopCallback);
NPlay.attachPop(PlayPausePopCallback);
NStop.attachPop(StopPopCallback);
#endif
#if HAS_TEMP_0
hot0.attachPop(hotPopCallback, &hot0);
#endif
#if HAS_TEMP_1
hot1.attachPop(hotPopCallback, &hot1);
#endif
#if HAS_TEMP_2 || HAS_TEMP_BED
hot2.attachPop(hotPopCallback, &hot2);
#endif
Fanpic.attachPop(setfanPopCallback, &Fanpic);
m11.attachPop(sethotPopCallback, &m11);
tup.attachPop(settempPopCallback, &tup);
tdown.attachPop(settempPopCallback, &tdown);
XYHome.attachPop(setmovePopCallback);
XYUp.attachPop(setmovePopCallback);
XYRight.attachPop(setmovePopCallback);
XYDown.attachPop(setmovePopCallback);
XYLeft.attachPop(setmovePopCallback);
ZHome.attachPop(setmovePopCallback);
ZUp.attachPop(setmovePopCallback);
ZDown.attachPop(setmovePopCallback);
SpeedOk.attachPop(ExitPopCallback);
Benter.attachPop(setgcodePopCallback);
startimer.enable();
}
}
