int
main(int argc, char* argv[])
{
// Setting default parameters for PointToPoint links and channels
Config::SetDefault("ns3::PointToPointNetDevice::DataRate", StringValue("1Mbps"));
Config::SetDefault("ns3::PointToPointChannel::Delay", StringValue("10ms"));
Config::SetDefault("ns3::QueueBase::MaxPackets", UintegerValue(10));
// Read optional command-line parameters (e.g., enable visualizer with ./waf --run=<> --visualize
CommandLine cmd;
cmd.Parse(argc, argv);
// Creating 3x3 topology
PointToPointHelper p2p;
PointToPointGridHelper grid(3, 3, p2p);
grid.BoundingBox(100, 100, 200, 200);
// Install NDN stack on all nodes
ndn::StackHelper ndnHelper;
ndnHelper.InstallAll();
// Set BestRoute strategy
ndn::StrategyChoiceHelper::InstallAll("/", "/localhost/nfd/strategy/best-route");
// Installing global routing interface on all nodes
ndn::GlobalRoutingHelper ndnGlobalRoutingHelper;
ndnGlobalRoutingHelper.InstallAll();
// Getting containers for the consumer/producer
Ptr<Node> producer = grid.GetNode(2, 2);
NodeContainer consumerNodes;
consumerNodes.Add(grid.GetNode(0, 0));
// Install NDN applications
std::string prefix = "/prefix";
ndn::AppHelper consumerHelper("ns3::ndn::ConsumerCbr");
consumerHelper.SetPrefix(prefix);
consumerHelper.SetAttribute("Frequency", StringValue("100")); // 100 interests a second
consumerHelper.Install(consumerNodes);
ndn::AppHelper producerHelper("ns3::ndn::Producer");
producerHelper.SetPrefix(prefix);
producerHelper.SetAttribute("PayloadSize", StringValue("1024"));
producerHelper.Install(producer);
// Add /prefix origins to ndn::GlobalRouter
ndnGlobalRoutingHelper.AddOrigins(prefix, producer);
// Calculate and install FIBs
ndn::GlobalRoutingHelper::CalculateRoutes();
Simulator::Stop(Seconds(20.0));
Simulator::Run();
Simulator::Destroy();
return 0;
}
int
main(int argc, char* argv[])
{
CommandLine cmd;
cmd.Parse(argc, argv);
AnnotatedTopologyReader topologyReader("", 25);
topologyReader.SetFileName("src/ndnSIM/examples/topologies/topo-grid-3x3-red-queues.txt");
topologyReader.Read();
// Install NDN stack on all nodes
ndn::StackHelper ndnHelper;
ndnHelper.InstallAll();
ndn::StrategyChoiceHelper::InstallAll("/", "ndn:/localhost/nfd/strategy/best-route");
// Installing global routing interface on all nodes
ndn::GlobalRoutingHelper ndnGlobalRoutingHelper;
ndnGlobalRoutingHelper.InstallAll();
// Getting containers for the consumer/producer
Ptr<Node> producer = Names::Find<Node>("Node8");
NodeContainer consumerNodes;
consumerNodes.Add(Names::Find<Node>("Node0"));
// Install NDN applications
std::string prefix = "/prefix";
ndn::AppHelper consumerHelper("ns3::ndn::ConsumerCbr");
consumerHelper.SetPrefix(prefix);
consumerHelper.SetAttribute("Frequency", StringValue("100")); // 100 interests a second
consumerHelper.Install(consumerNodes);
ndn::AppHelper producerHelper("ns3::ndn::Producer");
producerHelper.SetPrefix(prefix);
producerHelper.SetAttribute("PayloadSize", StringValue("1024"));
producerHelper.Install(producer);
// Add /prefix origins to ndn::GlobalRouter
ndnGlobalRoutingHelper.AddOrigins(prefix, producer);
// Calculate and install FIBs
ndn::GlobalRoutingHelper::CalculateRoutes();
Simulator::Stop(Seconds(20.0));
Simulator::Run();
Simulator::Destroy();
return 0;
}
// Network topology (default)
//
// n2 + + n3 .
// | ... |\ /| ... | .
// ======= \ / ======= .
// CSMA \ / CSMA .
// \ / .
// n1 +--- n0 ---+ n4 .
// | ... | / \ | ... | .
// ======= / \ ======= .
// CSMA / \ CSMA .
// / \ .
// n6 + + n5 .
// | ... | | ... | .
// ======= ======= .
// CSMA CSMA .
//
void
CsmaStarTestCase::DoRun (void)
{
//
// Default number of nodes in the star.
//
uint32_t nSpokes = 7;
CsmaHelper csma;
csma.SetChannelAttribute ("DataRate", StringValue ("100Mbps"));
csma.SetChannelAttribute ("Delay", StringValue ("1ms"));
CsmaStarHelper star (nSpokes, csma);
NodeContainer fillNodes;
//
// Just to be nasy, hang some more nodes off of the CSMA channel for each
// spoke, so that there are a total of 16 nodes on each channel. Stash
// all of these new devices into a container.
//
NetDeviceContainer fillDevices;
uint32_t nFill = 14;
for (uint32_t i = 0; i < star.GetSpokeDevices ().GetN (); ++i)
{
Ptr<Channel> channel = star.GetSpokeDevices ().Get (i)->GetChannel ();
Ptr<CsmaChannel> csmaChannel = channel->GetObject<CsmaChannel> ();
NodeContainer newNodes;
newNodes.Create (nFill);
fillNodes.Add (newNodes);
fillDevices.Add (csma.Install (newNodes, csmaChannel));
}
InternetStackHelper internet;
star.InstallStack (internet);
internet.Install (fillNodes);
star.AssignIpv4Addresses (Ipv4AddressHelper ("10.1.0.0", "255.255.255.0"));
//
// We assigned addresses to the logical hub and the first "drop" of the
// CSMA network that acts as the spoke, but we also have a number of fill
// devices (nFill) also hanging off the CSMA network. We have got to
// assign addresses to them as well. We put all of the fill devices into
// a single device container, so the first nFill devices are associated
// with the channel connected to spokeDevices.Get (0), the second nFill
// devices afe associated with the channel connected to spokeDevices.Get (1)
// etc.
//
Ipv4AddressHelper address;
for(uint32_t i = 0; i < star.SpokeCount (); ++i)
{
std::ostringstream subnet;
subnet << "10.1." << i << ".0";
address.SetBase (subnet.str ().c_str (), "255.255.255.0", "0.0.0.3");
for (uint32_t j = 0; j < nFill; ++j)
{
address.Assign (fillDevices.Get (i * nFill + j));
}
}
//
// Create a packet sink on the star "hub" to receive packets.
//
uint16_t port = 50000;
Address hubLocalAddress (InetSocketAddress (Ipv4Address::GetAny (), port));
PacketSinkHelper packetSinkHelper ("ns3::TcpSocketFactory", hubLocalAddress);
ApplicationContainer hubApp = packetSinkHelper.Install (star.GetHub ());
hubApp.Start (Seconds (1.0));
hubApp.Stop (Seconds (10.0));
//
// Create OnOff applications to send TCP to the hub, one on each spoke node.
//
// Make packets be sent about every DefaultPacketSize / DataRate =
// 4096 bits / (5000 bits/second) = 0.82 second.
OnOffHelper onOffHelper ("ns3::TcpSocketFactory", Address ());
onOffHelper.SetConstantRate (DataRate (5000));
ApplicationContainer spokeApps;
for (uint32_t i = 0; i < star.SpokeCount (); ++i)
{
AddressValue remoteAddress (InetSocketAddress (star.GetHubIpv4Address (i), port));
onOffHelper.SetAttribute ("Remote", remoteAddress);
spokeApps.Add (onOffHelper.Install (star.GetSpokeNode (i)));
}
spokeApps.Start (Seconds (1.0));
spokeApps.Stop (Seconds (10.0));
//
// Because we are evil, we also add OnOff applications to send TCP to the hub
// from the fill devices on each CSMA link. The first nFill nodes in the
// fillNodes container are on the CSMA network talking to the zeroth device
// on the hub node. The next nFill nodes are on the CSMA network talking to
// the first device on the hub node, etc. So the ith fillNode is associated
// with the hub address found on the (i / nFill)th device on the hub node.
//
ApplicationContainer fillApps;
for (uint32_t i = 0; i < fillNodes.GetN (); ++i)
{
AddressValue remoteAddress (InetSocketAddress (star.GetHubIpv4Address (i / nFill), port));
onOffHelper.SetAttribute ("Remote", remoteAddress);
fillApps.Add (onOffHelper.Install (fillNodes.Get (i)));
}
fillApps.Start (Seconds (1.0));
fillApps.Stop (Seconds (10.0));
//
// Turn on global static routing so we can actually be routed across the star.
//
Ipv4GlobalRoutingHelper::PopulateRoutingTables ();
// Trace receptions
Config::ConnectWithoutContext ("/NodeList/0/ApplicationList/*/$ns3::PacketSink/Rx",
MakeCallback (&CsmaStarTestCase::SinkRx, this));
Simulator::Run ();
Simulator::Destroy ();
// The hub node should have received 10 packets from the nFill + 1
// nodes on each spoke.
NS_TEST_ASSERT_MSG_EQ (m_count, 10 * ( nSpokes * (nFill + 1)), "Hub node did not receive the proper number of packets");
}
// Network topology
//
// n0 n1 n2 n3
// | | | |
// =====================
//
// node n0,n1,n3 pings to node n2
// node n0 generates protocol 2 (IGMP) to node n3
//
void
CsmaPingTestCase::DoRun (void)
{
// Here, we will explicitly create four nodes.
NodeContainer c;
c.Create (4);
// connect all our nodes to a shared channel.
CsmaHelper csma;
csma.SetChannelAttribute ("DataRate", DataRateValue (DataRate (5000000)));
csma.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2)));
csma.SetDeviceAttribute ("EncapsulationMode", StringValue ("Llc"));
NetDeviceContainer devs = csma.Install (c);
// add an ip stack to all nodes.
InternetStackHelper ipStack;
ipStack.Install (c);
// assign ip addresses
Ipv4AddressHelper ip;
ip.SetBase ("192.168.1.0", "255.255.255.0");
Ipv4InterfaceContainer addresses = ip.Assign (devs);
// Create the OnOff application to send UDP datagrams from n0 to n1.
//
// Make packets be sent about every DefaultPacketSize / DataRate =
// 4096 bits / (5000 bits/second) = 0.82 second.
Config::SetDefault ("ns3::Ipv4RawSocketImpl::Protocol", StringValue ("2"));
InetSocketAddress dst = InetSocketAddress (addresses.GetAddress (3));
OnOffHelper onoff = OnOffHelper ("ns3::Ipv4RawSocketFactory", dst);
onoff.SetConstantRate (DataRate (5000));
ApplicationContainer apps = onoff.Install (c.Get (0));
apps.Start (Seconds (1.0));
apps.Stop (Seconds (10.0));
PacketSinkHelper sink = PacketSinkHelper ("ns3::Ipv4RawSocketFactory", dst);
apps = sink.Install (c.Get (3));
apps.Start (Seconds (0.0));
apps.Stop (Seconds (11.0));
V4PingHelper ping = V4PingHelper (addresses.GetAddress (2));
NodeContainer pingers;
pingers.Add (c.Get (0));
pingers.Add (c.Get (1));
pingers.Add (c.Get (3));
apps = ping.Install (pingers);
apps.Start (Seconds (2.0));
apps.Stop (Seconds (5.0));
// Trace receptions
Config::ConnectWithoutContext ("/NodeList/3/ApplicationList/0/$ns3::PacketSink/Rx",
MakeCallback (&CsmaPingTestCase::SinkRx, this));
// Trace pings
Config::Connect ("/NodeList/*/ApplicationList/*/$ns3::V4Ping/Rtt",
MakeCallback (&CsmaPingTestCase::PingRtt, this));
Simulator::Run ();
Simulator::Destroy ();
// We should have sent and received 10 packets
NS_TEST_ASSERT_MSG_EQ (m_countSinkRx, 10, "Node 3 should have received 10 packets");
// We should have 3 pingers that ping every second for 3 seconds.
NS_TEST_ASSERT_MSG_EQ (m_countPingRtt, 9, "Node 2 should have been pinged 9 times");
}
int
main (int argc, char *argv[])
{
CommandLine cmd;
cmd.Parse (argc, argv);
// Here, we will explicitly create four nodes.
NS_LOG_INFO ("Create nodes.");
NodeContainer c;
c.Create (4);
// connect all our nodes to a shared channel.
NS_LOG_INFO ("Build Topology.");
CsmaHelper csma;
csma.SetChannelAttribute ("DataRate", DataRateValue (DataRate (5000000)));
csma.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2)));
csma.SetDeviceAttribute ("EncapsulationMode", StringValue ("Llc"));
NetDeviceContainer devs = csma.Install (c);
// add an ip stack to all nodes.
NS_LOG_INFO ("Add ip stack.");
InternetStackHelper ipStack;
ipStack.Install (c);
// assign ip addresses
NS_LOG_INFO ("Assign ip addresses.");
Ipv4AddressHelper ip;
ip.SetBase ("192.168.1.0", "255.255.255.0");
Ipv4InterfaceContainer addresses = ip.Assign (devs);
NS_LOG_INFO ("Create Source");
Config::SetDefault ("ns3::Ipv4RawSocketImpl::Protocol", StringValue ("2"));
InetSocketAddress dst = InetSocketAddress (addresses.GetAddress (3));
OnOffHelper onoff = OnOffHelper ("ns3::Ipv4RawSocketFactory", dst);
onoff.SetConstantRate (DataRate (15000));
onoff.SetAttribute ("PacketSize", UintegerValue (1200));
ApplicationContainer apps = onoff.Install (c.Get (0));
apps.Start (Seconds (1.0));
apps.Stop (Seconds (10.0));
NS_LOG_INFO ("Create Sink.");
PacketSinkHelper sink = PacketSinkHelper ("ns3::Ipv4RawSocketFactory", dst);
apps = sink.Install (c.Get (3));
apps.Start (Seconds (0.0));
apps.Stop (Seconds (11.0));
NS_LOG_INFO ("Create pinger");
V4PingHelper ping = V4PingHelper (addresses.GetAddress (2));
NodeContainer pingers;
pingers.Add (c.Get (0));
pingers.Add (c.Get (1));
pingers.Add (c.Get (3));
apps = ping.Install (pingers);
apps.Start (Seconds (2.0));
apps.Stop (Seconds (5.0));
NS_LOG_INFO ("Configure Tracing.");
// first, pcap tracing in non-promiscuous mode
csma.EnablePcapAll ("csma-ping", false);
// then, print what the packet sink receives.
Config::ConnectWithoutContext ("/NodeList/3/ApplicationList/0/$ns3::PacketSink/Rx",
MakeCallback (&SinkRx));
// finally, print the ping rtts.
Config::Connect ("/NodeList/*/ApplicationList/*/$ns3::V4Ping/Rtt",
MakeCallback (&PingRtt));
Packet::EnablePrinting ();
NS_LOG_INFO ("Run Simulation.");
Simulator::Run ();
Simulator::Destroy ();
NS_LOG_INFO ("Done.");
}
int
main (int argc, char *argv[])
{
#ifdef NS3_MPI
// Distributed simulation setup
MpiInterface::Enable (&argc, &argv);
GlobalValue::Bind ("SimulatorImplementationType",
StringValue ("ns3::DistributedSimulatorImpl"));
LogComponentEnable ("BriteMPITest", LOG_LEVEL_ALL);
LogComponentEnable ("TcpSocketBase", LOG_LEVEL_INFO);
uint32_t systemId = MpiInterface::GetSystemId ();
uint32_t systemCount = MpiInterface::GetSize ();
// Check for valid distributed parameters.
// For just this particular example, must have 2 and only 2 Logical Processors (LPs)
NS_ASSERT_MSG (systemCount == 2, "This demonstration requires 2 and only 2 logical processors.");
// BRITE needs a configuration file to build its graph. By default, this
// example will use the TD_ASBarabasi_RTWaxman.conf file. There are many others
// which can be found in the BRITE/conf_files directory
std::string confFile = "src/brite/examples/conf_files/TD_ASBarabasi_RTWaxman.conf";
bool tracing = false;
bool nix = false;
CommandLine cmd;
cmd.AddValue ("confFile", "BRITE conf file", confFile);
cmd.AddValue ("tracing", "Enable or disable ascii tracing", tracing);
cmd.AddValue ("nix", "Enable or disable nix-vector routing", nix);
cmd.Parse (argc,argv);
// Invoke the BriteTopologyHelper and pass in a BRITE
// configuration file and a seed file. This will use
// BRITE to build a graph from which we can build the ns-3 topology
BriteTopologyHelper bth (confFile);
PointToPointHelper p2p;
Ipv4StaticRoutingHelper staticRouting;
Ipv4GlobalRoutingHelper globalRouting;
Ipv4ListRoutingHelper listRouting;
Ipv4NixVectorHelper nixRouting;
InternetStackHelper stack;
if (nix)
{
listRouting.Add (staticRouting, 0);
listRouting.Add (nixRouting, 10);
}
else
{
listRouting.Add (staticRouting, 0);
listRouting.Add (globalRouting, 10);
}
stack.SetRoutingHelper (listRouting);
Ipv4AddressHelper address;
address.SetBase ("10.0.0.0", "255.255.255.252");
//build topology as normal but also pass systemCount
bth.BuildBriteTopology (stack, systemCount);
bth.AssignIpv4Addresses (address);
NS_LOG_LOGIC ("Number of AS created " << bth.GetNAs ());
uint16_t port = 5001;
NodeContainer client;
NodeContainer server;
//For this example will use AS 0 and AS 1 which will be on seperate systems
//due to the mod divide used to assign AS to system.
//GetSystemNumberForAs (uint32_t) can be used to determine which system an
//AS is assigned to
NS_LOG_LOGIC ("AS 0 has been assigned to system " << bth.GetSystemNumberForAs (0));
NS_LOG_LOGIC ("As 1 has been assigned to system " << bth.GetSystemNumberForAs (1));
//install client node on last leaf node of AS 0
client.Add (CreateObject<Node> (0));
stack.Install (client);
int numLeafNodesInAsZero = bth.GetNLeafNodesForAs (0);
client.Add (bth.GetLeafNodeForAs (0, numLeafNodesInAsZero - 1));
//install server node on last leaf node on AS 1
server.Add (CreateObject<Node> (1));
stack.Install (server);
int numLeafNodesInAsOne = bth.GetNLeafNodesForAs (1);
server.Add (bth.GetLeafNodeForAs (1, numLeafNodesInAsOne - 1));
p2p.SetDeviceAttribute ("DataRate", StringValue ("5Mbps"));
p2p.SetChannelAttribute ("Delay", StringValue ("2ms"));
NetDeviceContainer p2pClientDevices;
NetDeviceContainer p2pServerDevices;
p2pClientDevices = p2p.Install (client);
p2pServerDevices = p2p.Install (server);
address.SetBase ("10.1.0.0", "255.255.0.0");
Ipv4InterfaceContainer clientInterfaces;
clientInterfaces = address.Assign (p2pClientDevices);
address.SetBase ("10.2.0.0", "255.255.0.0");
Ipv4InterfaceContainer serverInterfaces;
serverInterfaces = address.Assign (p2pServerDevices);
if (!nix)
{
Ipv4GlobalRoutingHelper::PopulateRoutingTables ();
}
//only has two systems in this example. Install applications only on nodes in my system
//Moved here to get totalRX at end
ApplicationContainer sinkApps;
if (systemId == 1)
{
Address sinkLocalAddress (InetSocketAddress (Ipv4Address::GetAny (), port));
PacketSinkHelper packetSinkHelper ("ns3::TcpSocketFactory", sinkLocalAddress);
sinkApps.Add (packetSinkHelper.Install (server.Get (0)));
sinkApps.Start (Seconds (0.0));
sinkApps.Stop (Seconds (10.0));
}
if (systemId == 0)
{
OnOffHelper clientHelper ("ns3::TcpSocketFactory", Address ());
clientHelper.SetAttribute ("OnTime", StringValue ("ns3::ConstantRandomVariable[Constant=1]"));
clientHelper.SetAttribute ("OffTime", StringValue ("ns3::ConstantRandomVariable[Constant=0]"));
ApplicationContainer clientApps;
AddressValue remoteAddress (InetSocketAddress (serverInterfaces.GetAddress (0), port));
clientHelper.SetAttribute ("Remote", remoteAddress);
clientApps.Add (clientHelper.Install (client.Get (0)));
clientApps.Start (Seconds (1.0)); // Start 1 second after sink
clientApps.Stop (Seconds (9.0)); // Stop before the sink
}
if (!nix)
{
Ipv4GlobalRoutingHelper::PopulateRoutingTables ();
}
if (tracing)
{
AsciiTraceHelper ascii;
p2p.EnableAsciiAll (ascii.CreateFileStream ("briteLeaves.tr"));
}
// Run the simulator
Simulator::Stop (Seconds (200.0));
Simulator::Run ();
Simulator::Destroy ();
if (systemId == 1)
{
Ptr<PacketSink> sink1 = DynamicCast<PacketSink> (sinkApps.Get (0));
NS_LOG_DEBUG ("Total Bytes Received: " << sink1->GetTotalRx ());
}
MpiInterface::Disable ();
return 0;
#else
NS_FATAL_ERROR ("Can't use distributed simulator without MPI compiled in");
#endif
}
void
EpcS1uDlTestCase::DoRun ()
{
Ptr<PointToPointEpcHelper> epcHelper = CreateObject<PointToPointEpcHelper> ();
Ptr<Node> pgw = epcHelper->GetPgwNode ();
// allow jumbo packets
Config::SetDefault ("ns3::CsmaNetDevice::Mtu", UintegerValue (30000));
Config::SetDefault ("ns3::PointToPointNetDevice::Mtu", UintegerValue (30000));
epcHelper->SetAttribute ("S1uLinkMtu", UintegerValue (30000));
// Create a single RemoteHost
NodeContainer remoteHostContainer;
remoteHostContainer.Create (1);
Ptr<Node> remoteHost = remoteHostContainer.Get (0);
InternetStackHelper internet;
internet.Install (remoteHostContainer);
// Create the internet
PointToPointHelper p2ph;
p2ph.SetDeviceAttribute ("DataRate", DataRateValue (DataRate ("100Gb/s")));
NetDeviceContainer internetDevices = p2ph.Install (pgw, remoteHost);
Ipv4AddressHelper ipv4h;
ipv4h.SetBase ("1.0.0.0", "255.0.0.0");
ipv4h.Assign (internetDevices);
// setup default gateway for the remote hosts
Ipv4StaticRoutingHelper ipv4RoutingHelper;
Ptr<Ipv4StaticRouting> remoteHostStaticRouting = ipv4RoutingHelper.GetStaticRouting (remoteHost->GetObject<Ipv4> ());
// hardcoded UE addresses for now
remoteHostStaticRouting->AddNetworkRouteTo (Ipv4Address ("7.0.0.0"), Ipv4Mask ("255.255.255.0"), 1);
NodeContainer enbs;
uint16_t cellIdCounter = 0;
for (std::vector<EnbDlTestData>::iterator enbit = m_enbDlTestData.begin ();
enbit < m_enbDlTestData.end ();
++enbit)
{
Ptr<Node> enb = CreateObject<Node> ();
enbs.Add (enb);
// we test EPC without LTE, hence we use:
// 1) a CSMA network to simulate the cell
// 2) a raw socket opened on the CSMA device to simulate the LTE socket
uint16_t cellId = ++cellIdCounter;
NodeContainer ues;
ues.Create (enbit->ues.size ());
NodeContainer cell;
cell.Add (ues);
cell.Add (enb);
CsmaHelper csmaCell;
NetDeviceContainer cellDevices = csmaCell.Install (cell);
// the eNB's CSMA NetDevice acting as an LTE NetDevice.
Ptr<NetDevice> enbDevice = cellDevices.Get (cellDevices.GetN () - 1);
// Note that the EpcEnbApplication won't care of the actual NetDevice type
epcHelper->AddEnb (enb, enbDevice, cellId);
// Plug test RRC entity
Ptr<EpcEnbApplication> enbApp = enb->GetApplication (0)->GetObject<EpcEnbApplication> ();
NS_ASSERT_MSG (enbApp != 0, "cannot retrieve EpcEnbApplication");
Ptr<EpcTestRrc> rrc = CreateObject<EpcTestRrc> ();
rrc->SetS1SapProvider (enbApp->GetS1SapProvider ());
enbApp->SetS1SapUser (rrc->GetS1SapUser ());
// we install the IP stack on UEs only
InternetStackHelper internet;
internet.Install (ues);
// assign IP address to UEs, and install applications
for (uint32_t u = 0; u < ues.GetN (); ++u)
{
Ptr<NetDevice> ueLteDevice = cellDevices.Get (u);
Ipv4InterfaceContainer ueIpIface = epcHelper->AssignUeIpv4Address (NetDeviceContainer (ueLteDevice));
Ptr<Node> ue = ues.Get (u);
// disable IP Forwarding on the UE. This is because we use
// CSMA broadcast MAC addresses for this test. The problem
// won't happen with a LteUeNetDevice.
ue->GetObject<Ipv4> ()->SetAttribute ("IpForward", BooleanValue (false));
uint16_t port = 1234;
PacketSinkHelper packetSinkHelper ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), port));
ApplicationContainer apps = packetSinkHelper.Install (ue);
apps.Start (Seconds (1.0));
apps.Stop (Seconds (10.0));
enbit->ues[u].serverApp = apps.Get (0)->GetObject<PacketSink> ();
Time interPacketInterval = Seconds (0.01);
UdpEchoClientHelper client (ueIpIface.GetAddress (0), port);
client.SetAttribute ("MaxPackets", UintegerValue (enbit->ues[u].numPkts));
client.SetAttribute ("Interval", TimeValue (interPacketInterval));
client.SetAttribute ("PacketSize", UintegerValue (enbit->ues[u].pktSize));
apps = client.Install (remoteHost);
apps.Start (Seconds (2.0));
apps.Stop (Seconds (10.0));
enbit->ues[u].clientApp = apps.Get (0);
uint64_t imsi = u+1;
epcHelper->AddUe (ueLteDevice, imsi);
epcHelper->ActivateEpsBearer (ueLteDevice, imsi, EpcTft::Default (), EpsBearer (EpsBearer::NGBR_VIDEO_TCP_DEFAULT));
enbApp->GetS1SapProvider ()->InitialUeMessage (imsi, (uint16_t) imsi);
}
}
Simulator::Run ();
for (std::vector<EnbDlTestData>::iterator enbit = m_enbDlTestData.begin ();
enbit < m_enbDlTestData.end ();
++enbit)
{
for (std::vector<UeDlTestData>::iterator ueit = enbit->ues.begin ();
ueit < enbit->ues.end ();
++ueit)
{
NS_TEST_ASSERT_MSG_EQ (ueit->serverApp->GetTotalRx (), (ueit->numPkts) * (ueit->pktSize), "wrong total received bytes");
}
}
Simulator::Destroy ();
}
int
main(int argc, char* argv[])
{
// LogComponentEnable("ndn.CbisGlobalRoutingHelper", LOG_LEVEL_INFO);
// Setting default parameters for PointToPoint links and channels
Config::SetDefault("ns3::PointToPointNetDevice::DataRate", StringValue("1Mbps"));
Config::SetDefault("ns3::PointToPointChannel::Delay", StringValue("1ms"));
Config::SetDefault("ns3::QueueBase::MaxSize", StringValue("10p"));
// Read optional command-line parameters (e.g., enable visualizer with ./waf --run=<> --visualize
CommandLine cmd;
cmd.Parse(argc, argv);
// Creating 3x3 topology
PointToPointHelper p2p;
PointToPointGridHelper grid(3, 3, p2p);
grid.BoundingBox(100, 100, 200, 200);
// Install CCNx stack on all nodes
ndn::StackHelper ndnHelper;
// ndnHelper.SetForwardingStrategy ("ns3::ndn::fw::SmartFlooding");
// ndnHelper.SetContentStore ("ns3::ndn::cs::Lru", "MaxSize", "10");
ndnHelper.InstallAll();
// Choosing forwarding strategy
ndn::StrategyChoiceHelper::InstallAll("/prefix", "/localhost/nfd/strategy/ncc");
// Installing global routing interface on all nodes
// ndn::CbisGlobalRoutingHelper ndnGlobalRoutingHelper;
ndn::GlobalRoutingHelper ndnGlobalRoutingHelper;
ndnGlobalRoutingHelper.InstallAll();
// Getting containers for the consumer/producer
Ptr<Node> producer = grid.GetNode(2, 2);
NodeContainer consumerNodes;
consumerNodes.Add(grid.GetNode(0, 0));
// Install CCNx applications
std::string prefix = "/prefix";
ndn::AppHelper consumerHelper("ns3::ndn::ConsumerZipfMandelbrot");
// ndn::AppHelper consumerHelper ("ns3::ndn::ConsumerCbr");
consumerHelper.SetPrefix(prefix);
consumerHelper.SetAttribute("Frequency", StringValue("100")); // 100 interests a second
consumerHelper.SetAttribute("NumberOfContents", StringValue("100")); // 10 different contents
// consumerHelper.SetAttribute ("Randomize", StringValue ("uniform")); // 100 interests a second
consumerHelper.Install(consumerNodes);
ndn::AppHelper producerHelper("ns3::ndn::Producer");
producerHelper.SetPrefix(prefix);
producerHelper.SetAttribute("PayloadSize", StringValue("100"));
producerHelper.Install(producer);
ndnGlobalRoutingHelper.AddOrigins(prefix, producer);
// Calculate and install FIBs
ndn::GlobalRoutingHelper::CalculateRoutes();
Simulator::Stop(Seconds(1.0));
Simulator::Run();
Simulator::Destroy();
return 0;
}