Ejemplo n.º 1
0
OGRGeometry* BuildOgrPolygon(Polygon* poly, OGRCoordinateTransformation* transform)
{
    OGRPolygon* result = new OGRPolygon();

    list<Point*>* pOuter = poly->outerRing;
    list<Point*>::iterator ringIter;
    OGRLinearRing* ring = new OGRLinearRing();
    for (ringIter = pOuter->begin(); ringIter != pOuter->end(); ringIter++) {
        double x = (*ringIter)->X;
        double y = (*ringIter)->Y;
        if (transform != NULL)
            transform->Transform(1, &x, &y);
        ring->addPoint(x, y);
    }
    result->addRingDirectly(ring);

    list<list<Point *>*>* innerRings = poly->innerRings;
    list<list<Point *>*>::iterator ringsIter;
    for (ringsIter = innerRings->begin(); ringsIter != innerRings->end(); ringsIter++) {
        ring = new OGRLinearRing();
        list<Point*>* currRing = *ringsIter;
        for (ringIter = currRing->begin(); ringIter != currRing->end(); ringIter++) {
            double x = (*ringIter)->X;
            double y = (*ringIter)->Y;
            if (transform != NULL)
                transform->Transform(1, &x, &y);
            ring->addPoint(x, y);
        }
        result->addRingDirectly(ring);
    }

    result->closeRings();
    return result;
}
Ejemplo n.º 2
0
OGRFeature *OGRCADLayer::GetFeature( GIntBig nFID )
{
    if( poCADLayer.getGeometryCount() <= static_cast<size_t>(nFID)
        || nFID < 0 )
    {
        return nullptr;
    }

    OGRFeature  *poFeature = nullptr;
    CADGeometry *poCADGeometry = poCADLayer.getGeometry( static_cast<size_t>(nFID) );

    if( nullptr == poCADGeometry || GetLastErrorCode() != CADErrorCodes::SUCCESS )
    {
        CPLError( CE_Failure, CPLE_NotSupported,
                 "Failed to get geometry with ID = " CPL_FRMT_GIB " from layer \"%s\". Libopencad errorcode: %d",
                 nFID, poCADLayer.getName().c_str(), GetLastErrorCode() );
        return nullptr;
    }

    poFeature = new OGRFeature( poFeatureDefn );
    poFeature->SetFID( nFID );
    poFeature->SetField( FIELD_NAME_THICKNESS, poCADGeometry->getThickness() );

    if( !poCADGeometry->getEED().empty() )
    {
        std::vector<std::string> asGeometryEED = poCADGeometry->getEED();
        std::string sEEDAsOneString = "";
        for ( std::vector<std::string>::const_iterator
              iter = asGeometryEED.cbegin();
              iter != asGeometryEED.cend(); ++iter )
        {
            sEEDAsOneString += *iter;
            sEEDAsOneString += ' ';
        }

        poFeature->SetField( FIELD_NAME_EXT_DATA, sEEDAsOneString.c_str() );
    }

    RGBColor stRGB = poCADGeometry->getColor();
    CPLString sHexColor;
    sHexColor.Printf("#%02X%02X%02X%02X", stRGB.R, stRGB.G, stRGB.B, 255);
    poFeature->SetField( FIELD_NAME_COLOR, sHexColor );

    CPLString sStyle;
    sStyle.Printf("PEN(c:%s,w:5px)", sHexColor.c_str());
    poFeature->SetStyleString( sStyle );

    std::vector< CADAttrib > oBlockAttrs = poCADGeometry->getBlockAttributes();
    for( const CADAttrib& oAttrib : oBlockAttrs )
    {
        CPLString osTag = oAttrib.getTag();
        auto featureAttrIt = asFeaturesAttributes.find( osTag );
        if( featureAttrIt != asFeaturesAttributes.end())
        {
            poFeature->SetField(*featureAttrIt, oAttrib.getTextValue().c_str());
        }
    }

    switch( poCADGeometry->getType() )
    {
        case CADGeometry::POINT:
        {
            CADPoint3D * const poCADPoint = ( CADPoint3D* ) poCADGeometry;
            CADVector stPositionVector = poCADPoint->getPosition();

            poFeature->SetGeometryDirectly( new OGRPoint( stPositionVector.getX(),
                                                          stPositionVector.getY(),
                                                          stPositionVector.getZ() ) );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADPoint" );
            break;
        }

        case CADGeometry::LINE:
        {
            CADLine * const poCADLine = ( CADLine* ) poCADGeometry;
            OGRLineString *poLS = new OGRLineString();
            poLS->addPoint( poCADLine->getStart().getPosition().getX(),
                           poCADLine->getStart().getPosition().getY(),
                           poCADLine->getStart().getPosition().getZ() );
            poLS->addPoint( poCADLine->getEnd().getPosition().getX(),
                           poCADLine->getEnd().getPosition().getY(),
                           poCADLine->getEnd().getPosition().getZ() );

            poFeature->SetGeometryDirectly( poLS );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADLine" );
            break;
        }

        case CADGeometry::SOLID:
        {
            CADSolid * const poCADSolid = ( CADSolid* ) poCADGeometry;
            OGRPolygon * poPoly = new OGRPolygon();
            OGRLinearRing * poLR = new OGRLinearRing();

            std::vector<CADVector> astSolidCorners = poCADSolid->getCorners();
            for( size_t i = 0; i < astSolidCorners.size(); ++i )
            {
                poLR->addPoint( astSolidCorners[i].getX(),
                                astSolidCorners[i].getY(),
                                astSolidCorners[i].getZ());
            }
            poPoly->addRingDirectly( poLR );
            poPoly->closeRings();
            poFeature->SetGeometryDirectly( poPoly );

            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADSolid" );
            break;
        }

        case CADGeometry::CIRCLE:
        {
            CADCircle * poCADCircle = static_cast<CADCircle*>(poCADGeometry);
            OGRCircularString * poCircle = new OGRCircularString();

            CADVector stCircleCenter = poCADCircle->getPosition();
            OGRPoint  oCirclePoint1;
            oCirclePoint1.setX( stCircleCenter.getX() - poCADCircle->getRadius() );
            oCirclePoint1.setY( stCircleCenter.getY() );
            oCirclePoint1.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint1 );

            OGRPoint  oCirclePoint2;
            oCirclePoint2.setX( stCircleCenter.getX() );
            oCirclePoint2.setY( stCircleCenter.getY() + poCADCircle->getRadius() );
            oCirclePoint2.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint2 );

            OGRPoint  oCirclePoint3;
            oCirclePoint3.setX( stCircleCenter.getX() + poCADCircle->getRadius() );
            oCirclePoint3.setY( stCircleCenter.getY() );
            oCirclePoint3.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint3 );

            OGRPoint  oCirclePoint4;
            oCirclePoint4.setX( stCircleCenter.getX() );
            oCirclePoint4.setY( stCircleCenter.getY() - poCADCircle->getRadius() );
            oCirclePoint4.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint4 );

            // Close the circle
            poCircle->addPoint( &oCirclePoint1 );

            /*NOTE: The alternative way:
                    OGRGeometry *poCircle = OGRGeometryFactory::approximateArcAngles(
                    poCADCircle->getPosition().getX(),
                    poCADCircle->getPosition().getY(),
                    poCADCircle->getPosition().getZ(),
                    poCADCircle->getRadius(), poCADCircle->getRadius(), 0.0,
                    0.0, 360.0,
                    0.0 );
            */
            poFeature->SetGeometryDirectly( poCircle );

            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADCircle" );
            break;
        }

        case CADGeometry::ARC:
        {
            CADArc * poCADArc = static_cast<CADArc*>(poCADGeometry);
            OGRCircularString * poCircle = new OGRCircularString();

            // Need at least 3 points in arc
            double dfStartAngle = poCADArc->getStartingAngle() * DEG2RAD;
            double dfEndAngle = poCADArc->getEndingAngle() * DEG2RAD;
            double dfMidAngle = (dfEndAngle + dfStartAngle) / 2;
            CADVector stCircleCenter = poCADArc->getPosition();

            OGRPoint  oCirclePoint;
            oCirclePoint.setX( stCircleCenter.getX() + poCADArc->getRadius() *
                                                            cos( dfStartAngle ) );
            oCirclePoint.setY( stCircleCenter.getY() + poCADArc->getRadius() *
                                                            sin( dfStartAngle ) );
            oCirclePoint.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint );

            oCirclePoint.setX( stCircleCenter.getX() + poCADArc->getRadius() *
                                                            cos( dfMidAngle ) );
            oCirclePoint.setY( stCircleCenter.getY() + poCADArc->getRadius() *
                                                            sin( dfMidAngle ) );
            oCirclePoint.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint );

            oCirclePoint.setX( stCircleCenter.getX() + poCADArc->getRadius() *
                                                            cos( dfEndAngle ) );
            oCirclePoint.setY( stCircleCenter.getY() + poCADArc->getRadius() *
                                                            sin( dfEndAngle ) );
            oCirclePoint.setZ( stCircleCenter.getZ() );
            poCircle->addPoint( &oCirclePoint );

            /*NOTE: alternative way:
                OGRGeometry * poArc = OGRGeometryFactory::approximateArcAngles(
                poCADArc->getPosition().getX(),
                poCADArc->getPosition().getY(),
                poCADArc->getPosition().getZ(),
                poCADArc->getRadius(), poCADArc->getRadius(), 0.0,
                dfStartAngle,
                dfStartAngle > dfEndAngle ?
                    ( dfEndAngle + 360.0f ) :
                    dfEndAngle,
                0.0 );
            */

            poFeature->SetGeometryDirectly( poCircle );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADArc" );

            break;
        }

        case CADGeometry::FACE3D:
        {
            CADFace3D * const poCADFace = ( CADFace3D* ) poCADGeometry;
            OGRPolygon * poPoly = new OGRPolygon();
            OGRLinearRing * poLR = new OGRLinearRing();

            for ( size_t i = 0; i < 3; ++i )
            {
                poLR->addPoint(
                    poCADFace->getCorner( i ).getX(),
                    poCADFace->getCorner( i ).getY(),
                    poCADFace->getCorner( i ).getZ()
                );
            }
            if ( !(poCADFace->getCorner( 2 ) == poCADFace->getCorner( 3 )) )
            {
                poLR->addPoint(
                    poCADFace->getCorner( 3 ).getX(),
                    poCADFace->getCorner( 3 ).getY(),
                    poCADFace->getCorner( 3 ).getZ()
                );
            }
            poPoly->addRingDirectly( poLR );
            poPoly->closeRings();
            poFeature->SetGeometryDirectly( poPoly );

            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADFace3D" );
            break;
        }

        case CADGeometry::LWPOLYLINE:
        {
            CADLWPolyline * const poCADLWPolyline = ( CADLWPolyline* ) poCADGeometry;

            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADLWPolyline" );

            /*
             * Excessive check, like in DXF driver.
             * I tried to make a single-point polyline, but couldn't make it.
             * Probably this check should be removed.
             */
            if( poCADLWPolyline->getVertexCount() == 1 )
            {
                poFeature->SetGeometryDirectly(
                            new OGRPoint( poCADLWPolyline->getVertex(0).getX(),
                                          poCADLWPolyline->getVertex(0).getY(),
                                          poCADLWPolyline->getVertex(0).getZ() )
                );

                break;
            }

            /*
             * If polyline has no arcs, handle it in easy way.
             */
            OGRLineString * poLS = new OGRLineString();

            if( poCADLWPolyline->getBulges().empty() )
            {
                for( size_t i = 0; i < poCADLWPolyline->getVertexCount(); ++i )
                {
                    CADVector stVertex = poCADLWPolyline->getVertex( i );
                    poLS->addPoint( stVertex.getX(),
                                    stVertex.getY(),
                                    stVertex.getZ()
                    );
                }

                poFeature->SetGeometryDirectly( poLS );
                break;
            }

            /*
             * Last case - if polyline has mixed arcs and lines.
             */
            bool   bLineStringStarted = false;
            std::vector< double > adfBulges = poCADLWPolyline->getBulges();
            const size_t nCount = std::min(adfBulges.size(), poCADLWPolyline->getVertexCount());

            for( size_t iCurrentVertex = 0; iCurrentVertex + 1 < nCount; iCurrentVertex++ )
            {
                CADVector stCurrentVertex = poCADLWPolyline->getVertex( iCurrentVertex );
                CADVector stNextVertex = poCADLWPolyline->getVertex( iCurrentVertex + 1 );

                double dfLength = sqrt( pow( stNextVertex.getX() - stCurrentVertex.getX(), 2 )
                                      + pow( stNextVertex.getY() - stCurrentVertex.getY(), 2 ) );

                /*
                 * Handling straight polyline segment.
                 */
                if( ( dfLength == 0 ) || ( adfBulges[iCurrentVertex] == 0 ) )
                {
                    if( !bLineStringStarted )
                    {
                        poLS->addPoint( stCurrentVertex.getX(),
                                        stCurrentVertex.getY(),
                                        stCurrentVertex.getZ()
                        );
                        bLineStringStarted = true;
                    }

                    poLS->addPoint( stNextVertex.getX(),
                                    stNextVertex.getY(),
                                    stNextVertex.getZ()
                    );
                }
                else
                {
                    double dfSegmentBulge = adfBulges[iCurrentVertex];
                    double dfH = ( dfSegmentBulge * dfLength ) / 2;
                    if( dfH == 0.0 )
                        dfH = 1.0; // just to avoid a division by zero
                    double dfRadius = ( dfH / 2 ) + ( dfLength * dfLength / ( 8 * dfH ) );
                    double dfOgrArcRotation = 0, dfOgrArcRadius = fabs( dfRadius );

                    /*
                     * Set arc's direction and keep bulge positive.
                     */
                    bool   bClockwise = ( dfSegmentBulge < 0 );
                    if( bClockwise )
                        dfSegmentBulge *= -1;

                    /*
                     * Get arc's center point.
                     */
                    double dfSaggita = fabs( dfSegmentBulge * ( dfLength / 2.0 ) );
                    double dfApo = bClockwise ? -( dfOgrArcRadius - dfSaggita ) :
                                                -( dfSaggita - dfOgrArcRadius );

                    CADVector stVertex;
                    stVertex.setX( stCurrentVertex.getX() - stNextVertex.getX() );
                    stVertex.setY( stCurrentVertex.getY() - stNextVertex.getY() );
                    stVertex.setZ( stCurrentVertex.getZ() );

                    CADVector stMidPoint;
                    stMidPoint.setX( stNextVertex.getX() + 0.5 * stVertex.getX() );
                    stMidPoint.setY( stNextVertex.getY() + 0.5 * stVertex.getY() );
                    stMidPoint.setZ( stVertex.getZ() );

                    CADVector stPperp;
                    stPperp.setX( stVertex.getY() );
                    stPperp.setY( -stVertex.getX() );
                    double dfStPperpLength = sqrt( stPperp.getX() * stPperp.getX() +
                                                   stPperp.getY() * stPperp.getY() );
                    // TODO: Check that length isnot 0
                    stPperp.setX( stPperp.getX() / dfStPperpLength );
                    stPperp.setY( stPperp.getY() / dfStPperpLength );

                    CADVector stOgrArcCenter;
                    stOgrArcCenter.setX( stMidPoint.getX() + ( stPperp.getX() * dfApo ) );
                    stOgrArcCenter.setY( stMidPoint.getY() + ( stPperp.getY() * dfApo ) );

                    /*
                     * Get the line's general vertical direction ( -1 = down, +1 = up ).
                     */
                    double dfLineDir = stNextVertex.getY() >
                                            stCurrentVertex.getY() ? 1.0f : -1.0f;

                    /*
                     * Get arc's starting angle.
                     */
                    double dfA = atan2( ( stOgrArcCenter.getY() - stCurrentVertex.getY() ),
                                        ( stOgrArcCenter.getX() - stCurrentVertex.getX() ) ) * DEG2RAD;
                    if( bClockwise && ( dfLineDir == 1.0 ) )
                        dfA += ( dfLineDir * 180.0 );

                    double dfOgrArcStartAngle = dfA > 0.0 ? -( dfA - 180.0 ) :
                                                            -( dfA + 180.0 );

                    /*
                     * Get arc's ending angle.
                     */
                    dfA = atan2( ( stOgrArcCenter.getY() - stNextVertex.getY() ),
                                 ( stOgrArcCenter.getX() - stNextVertex.getX() ) ) * DEG2RAD;
                    if( bClockwise && ( dfLineDir == 1.0 ) )
                        dfA += ( dfLineDir * 180.0 );

                    double dfOgrArcEndAngle = dfA > 0.0 ? -( dfA - 180.0 ) :
                                                          -( dfA + 180.0 );

                    if( !bClockwise && ( dfOgrArcStartAngle < dfOgrArcEndAngle) )
                        dfOgrArcEndAngle = -180.0 + ( dfLineDir * dfA );

                    if( bClockwise && ( dfOgrArcStartAngle > dfOgrArcEndAngle ) )
                        dfOgrArcEndAngle += 360.0;

                    /*
                     * Flip arc's rotation if necessary.
                     */
                    if( bClockwise && ( dfLineDir == 1.0 ) )
                        dfOgrArcRotation = dfLineDir * 180.0;

                    /*
                     * Tessellate the arc segment and append to the linestring.
                     */
                    OGRLineString * poArcpoLS =
                        ( OGRLineString * ) OGRGeometryFactory::approximateArcAngles(
                            stOgrArcCenter.getX(), stOgrArcCenter.getY(), stOgrArcCenter.getZ(),
                            dfOgrArcRadius, dfOgrArcRadius, dfOgrArcRotation,
                            dfOgrArcStartAngle,dfOgrArcEndAngle,
                            0.0 );

                    poLS->addSubLineString( poArcpoLS );

                    delete( poArcpoLS );
                }
            }

            if( poCADLWPolyline->isClosed() )
            {
                poLS->addPoint( poCADLWPolyline->getVertex(0).getX(),
                                poCADLWPolyline->getVertex(0).getY(),
                                poCADLWPolyline->getVertex(0).getZ()
                );
            }

            poFeature->SetGeometryDirectly( poLS );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADLWPolyline" );
            break;
        }

        // TODO: Unsupported smooth lines
        case CADGeometry::POLYLINE3D:
        {
            CADPolyline3D * const poCADPolyline3D = ( CADPolyline3D* ) poCADGeometry;
            OGRLineString * poLS = new OGRLineString();

            for( size_t i = 0; i < poCADPolyline3D->getVertexCount(); ++i )
            {
                CADVector stVertex = poCADPolyline3D->getVertex( i );

                poLS->addPoint( stVertex.getX(),
                                stVertex.getY(),
                                stVertex.getZ() );
            }

            poFeature->SetGeometryDirectly( poLS );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADPolyline3D" );
            break;
        }

        case CADGeometry::TEXT:
        {
            CADText * const poCADText = ( CADText * ) poCADGeometry;
            OGRPoint * poPoint = new OGRPoint( poCADText->getPosition().getX(),
                                               poCADText->getPosition().getY(),
                                               poCADText->getPosition().getZ() );
            CPLString sTextValue = CADRecode( poCADText->getTextValue(), nDWGEncoding );

            poFeature->SetField( FIELD_NAME_TEXT, sTextValue );
            poFeature->SetGeometryDirectly( poPoint );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADText" );

            sStyle.Printf("LABEL(f:\"Arial\",t:\"%s\",c:%s)", sTextValue.c_str(),
                                                              sHexColor.c_str());
            poFeature->SetStyleString( sStyle );
            break;
        }

        case CADGeometry::MTEXT:
        {
            CADMText * const poCADMText = ( CADMText * ) poCADGeometry;
            OGRPoint * poPoint = new OGRPoint( poCADMText->getPosition().getX(),
                                               poCADMText->getPosition().getY(),
                                               poCADMText->getPosition().getZ() );
            CPLString sTextValue = CADRecode( poCADMText->getTextValue(), nDWGEncoding );

            poFeature->SetField( FIELD_NAME_TEXT, sTextValue );
            poFeature->SetGeometryDirectly( poPoint );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADMText" );

            sStyle.Printf("LABEL(f:\"Arial\",t:\"%s\",c:%s)", sTextValue.c_str(),
                                                              sHexColor.c_str());
            poFeature->SetStyleString( sStyle );
            break;
        }

        case CADGeometry::SPLINE:
        {
            CADSpline * const poCADSpline = ( CADSpline * ) poCADGeometry;
            OGRLineString * poLS = new OGRLineString();

            // TODO: Interpolate spline as points or curves
            for( size_t i = 0; i < poCADSpline->getControlPoints().size(); ++i )
            {
                poLS->addPoint( poCADSpline->getControlPoints()[i].getX(),
                                poCADSpline->getControlPoints()[i].getY(),
                                poCADSpline->getControlPoints()[i].getZ() );
            }

            poFeature->SetGeometryDirectly( poLS );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADSpline" );
            break;
        }

        case CADGeometry::ELLIPSE:
        {
            CADEllipse * poCADEllipse = static_cast<CADEllipse*>(poCADGeometry);

            // FIXME: Start/end angles should be swapped to work exactly as DXF driver.
            // is it correct?
            double dfStartAngle = -1 * poCADEllipse->getEndingAngle() * DEG2RAD;
            double dfEndAngle = -1 * poCADEllipse->getStartingAngle() * DEG2RAD;
            double dfAxisRatio = poCADEllipse->getAxisRatio();

            dfStartAngle = fmod(dfStartAngle, 360.0);
            dfEndAngle = fmod(dfEndAngle, 360.0);
            if( dfStartAngle > dfEndAngle )
                dfEndAngle += 360.0;

            CADVector vectPosition = poCADEllipse->getPosition();
            CADVector vectSMAxis = poCADEllipse->getSMAxis();
            double dfPrimaryRadius, dfSecondaryRadius;
            double dfRotation;
            dfPrimaryRadius = sqrt( vectSMAxis.getX() * vectSMAxis.getX()
                                    + vectSMAxis.getY() * vectSMAxis.getY()
                                    + vectSMAxis.getZ() * vectSMAxis.getZ() );

            dfSecondaryRadius = dfAxisRatio * dfPrimaryRadius;

            dfRotation = -1 * atan2( vectSMAxis.getY(), vectSMAxis.getX() ) * DEG2RAD;

            OGRGeometry *poEllipse =
                OGRGeometryFactory::approximateArcAngles(
                    vectPosition.getX(), vectPosition.getY(), vectPosition.getZ(),
                    dfPrimaryRadius, dfSecondaryRadius, dfRotation,
                    dfStartAngle, dfEndAngle, 0.0 );

            poFeature->SetGeometryDirectly( poEllipse );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADEllipse" );
            break;
        }

        case CADGeometry::ATTDEF:
        {
            CADAttdef * const poCADAttdef = ( CADAttdef* ) poCADGeometry;
            OGRPoint * poPoint = new OGRPoint( poCADAttdef->getPosition().getX(),
                                               poCADAttdef->getPosition().getY(),
                                               poCADAttdef->getPosition().getZ() );
            CPLString sTextValue = CADRecode( poCADAttdef->getTag(), nDWGEncoding );

            poFeature->SetField( FIELD_NAME_TEXT, sTextValue );
            poFeature->SetGeometryDirectly( poPoint );
            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADAttdef" );

            sStyle.Printf("LABEL(f:\"Arial\",t:\"%s\",c:%s)", sTextValue.c_str(),
                                                              sHexColor.c_str());
            poFeature->SetStyleString( sStyle );
            break;
        }

        default:
        {
            CPLError( CE_Warning, CPLE_NotSupported,
                     "Unhandled feature. Skipping it." );

            poFeature->SetField( FIELD_NAME_GEOMTYPE, "CADUnknown" );
            delete poCADGeometry;
            return poFeature;
        }
    }

    delete poCADGeometry;
    poFeature->GetGeometryRef()->assignSpatialReference( poSpatialRef );
    return poFeature;
}