cid_load_glyph( T1_Decoder decoder,
FT_UInt glyph_index )
{
CID_Face face = (CID_Face)decoder->builder.face;
CID_FaceInfo cid = &face->cid;
FT_Byte* p;
FT_UInt fd_select;
FT_Stream stream = face->cid_stream;
FT_Error error = CID_Err_Ok;
FT_Byte* charstring = 0;
FT_Memory memory = face->root.memory;
FT_ULong glyph_length = 0;
PSAux_Service psaux = (PSAux_Service)face->psaux;
#ifdef FT_CONFIG_OPTION_INCREMENTAL
FT_Incremental_InterfaceRec *inc =
face->root.internal->incremental_interface;
#endif
FT_TRACE4(( "cid_load_glyph: glyph index %d\n", glyph_index ));
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* For incremental fonts get the character data using */
/* the callback function. */
if ( inc )
{
FT_Data glyph_data;
error = inc->funcs->get_glyph_data( inc->object,
glyph_index, &glyph_data );
if ( error )
goto Exit;
p = (FT_Byte*)glyph_data.pointer;
fd_select = (FT_UInt)cid_get_offset( &p, (FT_Byte)cid->fd_bytes );
if ( glyph_data.length != 0 )
{
glyph_length = glyph_data.length - cid->fd_bytes;
(void)FT_ALLOC( charstring, glyph_length );
if ( !error )
ft_memcpy( charstring, glyph_data.pointer + cid->fd_bytes,
glyph_length );
}
inc->funcs->free_glyph_data( inc->object, &glyph_data );
if ( error )
goto Exit;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
/* For ordinary fonts read the CID font dictionary index */
/* and charstring offset from the CIDMap. */
{
FT_UInt entry_len = cid->fd_bytes + cid->gd_bytes;
FT_ULong off1;
if ( FT_STREAM_SEEK( cid->data_offset + cid->cidmap_offset +
glyph_index * entry_len ) ||
FT_FRAME_ENTER( 2 * entry_len ) )
goto Exit;
p = (FT_Byte*)stream->cursor;
fd_select = (FT_UInt) cid_get_offset( &p, (FT_Byte)cid->fd_bytes );
off1 = (FT_ULong)cid_get_offset( &p, (FT_Byte)cid->gd_bytes );
p += cid->fd_bytes;
glyph_length = cid_get_offset( &p, (FT_Byte)cid->gd_bytes ) - off1;
FT_FRAME_EXIT();
if ( fd_select >= (FT_UInt)cid->num_dicts )
{
error = CID_Err_Invalid_Offset;
goto Exit;
}
if ( glyph_length == 0 )
goto Exit;
if ( FT_ALLOC( charstring, glyph_length ) )
goto Exit;
if ( FT_STREAM_READ_AT( cid->data_offset + off1,
charstring, glyph_length ) )
goto Exit;
}
/* Now set up the subrs array and parse the charstrings. */
{
CID_FaceDict dict;
CID_Subrs cid_subrs = face->subrs + fd_select;
FT_Int cs_offset;
/* Set up subrs */
decoder->num_subrs = cid_subrs->num_subrs;
decoder->subrs = cid_subrs->code;
decoder->subrs_len = 0;
/* Set up font matrix */
dict = cid->font_dicts + fd_select;
decoder->font_matrix = dict->font_matrix;
decoder->font_offset = dict->font_offset;
decoder->lenIV = dict->private_dict.lenIV;
/* Decode the charstring. */
/* Adjustment for seed bytes. */
cs_offset = ( decoder->lenIV >= 0 ? decoder->lenIV : 0 );
/* Decrypt only if lenIV >= 0. */
if ( decoder->lenIV >= 0 )
psaux->t1_decrypt( charstring, glyph_length, 4330 );
error = decoder->funcs.parse_charstrings(
decoder, charstring + cs_offset,
(FT_Int)glyph_length - cs_offset );
}
FT_FREE( charstring );
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* Incremental fonts can optionally override the metrics. */
if ( !error && inc && inc->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
metrics.bearing_x = FIXED_TO_INT( decoder->builder.left_bearing.x );
metrics.bearing_y = 0;
metrics.advance = FIXED_TO_INT( decoder->builder.advance.x );
metrics.advance_v = FIXED_TO_INT( decoder->builder.advance.y );
error = inc->funcs->get_glyph_metrics( inc->object,
glyph_index, FALSE, &metrics );
decoder->builder.left_bearing.x = INT_TO_FIXED( metrics.bearing_x );
decoder->builder.advance.x = INT_TO_FIXED( metrics.advance );
decoder->builder.advance.y = INT_TO_FIXED( metrics.advance_v );
}
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
Exit:
return error;
}
T1_Get_Private_Dict( T1_Parser parser,
PSAux_Service psaux )
{
FT_Stream stream = parser->stream;
FT_Memory memory = parser->root.memory;
FT_Error error = FT_Err_Ok;
FT_ULong size;
if ( parser->in_pfb )
{
/* in the case of the PFB format, the private dictionary can be */
/* made of several segments. We thus first read the number of */
/* segments to compute the total size of the private dictionary */
/* then re-read them into memory. */
FT_Long start_pos = FT_STREAM_POS();
FT_UShort tag;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Fail;
if ( tag != 0x8002U )
break;
parser->private_len += size;
if ( FT_STREAM_SKIP( size ) )
goto Fail;
}
/* Check that we have a private dictionary there */
/* and allocate private dictionary buffer */
if ( parser->private_len == 0 )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" invalid private dictionary section\n" ));
error = FT_THROW( Invalid_File_Format );
goto Fail;
}
if ( FT_STREAM_SEEK( start_pos ) ||
FT_ALLOC( parser->private_dict, parser->private_len ) )
goto Fail;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error || tag != 0x8002U )
{
error = FT_Err_Ok;
break;
}
if ( FT_STREAM_READ( parser->private_dict + parser->private_len,
size ) )
goto Fail;
parser->private_len += size;
}
}
else
{
/* We have already `loaded' the whole PFA font file into memory; */
/* if this is a memory resource, allocate a new block to hold */
/* the private dict. Otherwise, simply overwrite into the base */
/* dictionary block in the heap. */
/* first of all, look at the `eexec' keyword */
FT_Byte* cur = parser->base_dict;
FT_Byte* limit = cur + parser->base_len;
FT_Byte c;
Again:
for (;;)
{
c = cur[0];
if ( c == 'e' && cur + 9 < limit ) /* 9 = 5 letters for `eexec' + */
/* whitespace + 4 chars */
{
if ( cur[1] == 'e' &&
cur[2] == 'x' &&
cur[3] == 'e' &&
cur[4] == 'c' )
break;
}
cur++;
if ( cur >= limit )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" could not find `eexec' keyword\n" ));
error = FT_THROW( Invalid_File_Format );
goto Exit;
}
}
/* check whether `eexec' was real -- it could be in a comment */
/* or string (as e.g. in u003043t.gsf from ghostscript) */
parser->root.cursor = parser->base_dict;
/* set limit to `eexec' + whitespace + 4 characters */
parser->root.limit = cur + 10;
cur = parser->root.cursor;
limit = parser->root.limit;
while ( cur < limit )
{
if ( *cur == 'e' && ft_strncmp( (char*)cur, "eexec", 5 ) == 0 )
goto Found;
T1_Skip_PS_Token( parser );
if ( parser->root.error )
break;
T1_Skip_Spaces ( parser );
cur = parser->root.cursor;
}
/* we haven't found the correct `eexec'; go back and continue */
/* searching */
cur = limit;
limit = parser->base_dict + parser->base_len;
goto Again;
/* now determine where to write the _encrypted_ binary private */
/* dictionary. We overwrite the base dictionary for disk-based */
/* resources and allocate a new block otherwise */
Found:
parser->root.limit = parser->base_dict + parser->base_len;
T1_Skip_PS_Token( parser );
cur = parser->root.cursor;
limit = parser->root.limit;
/* according to the Type1 spec, the first cipher byte must not be */
/* an ASCII whitespace character code (blank, tab, carriage return */
/* or line feed). We have seen Type 1 fonts with two line feed */
/* characters... So skip now all whitespace character codes. */
/* SumatraPDF: stop at \r if it's not used for EOL - cf. https://code.google.com/p/sumatrapdf/issues/detail?id=2408 */
c = !memchr(cur, '\n', limit - cur) || memchr(cur, '\n', limit - cur) > memchr(cur, '\r', limit - cur);
while ( cur < limit &&
( *cur == ' ' ||
*cur == '\t' ||
( c && *cur == '\r' ) ||
*cur == '\n' ) )
++cur;
if ( cur >= limit )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" `eexec' not properly terminated\n" ));
error = FT_THROW( Invalid_File_Format );
goto Exit;
}
size = (FT_ULong)( parser->base_len - ( cur - parser->base_dict ) );
if ( parser->in_memory )
{
/* note that we allocate one more byte to put a terminating `0' */
if ( FT_ALLOC( parser->private_dict, size + 1 ) )
goto Fail;
parser->private_len = size;
}
else
{
parser->single_block = 1;
parser->private_dict = parser->base_dict;
parser->private_len = size;
parser->base_dict = 0;
parser->base_len = 0;
}
/* now determine whether the private dictionary is encoded in binary */
/* or hexadecimal ASCII format -- decode it accordingly */
/* we need to access the next 4 bytes (after the final whitespace */
/* following the `eexec' keyword); if they all are hexadecimal */
/* digits, then we have a case of ASCII storage */
if ( cur + 3 < limit &&
ft_isxdigit( cur[0] ) && ft_isxdigit( cur[1] ) &&
ft_isxdigit( cur[2] ) && ft_isxdigit( cur[3] ) )
{
/* ASCII hexadecimal encoding */
FT_Long len;
parser->root.cursor = cur;
(void)psaux->ps_parser_funcs->to_bytes( &parser->root,
parser->private_dict,
parser->private_len,
&len,
0 );
parser->private_len = len;
/* put a safeguard */
parser->private_dict[len] = '\0';
}
else
/* binary encoding -- copy the private dict */
FT_MEM_MOVE( parser->private_dict, cur, size );
}
/* we now decrypt the encoded binary private dictionary */
psaux->t1_decrypt( parser->private_dict, parser->private_len, 55665U );
if ( parser->private_len < 4 )
{
FT_ERROR(( "T1_Get_Private_Dict:"
" invalid private dictionary section\n" ));
error = FT_THROW( Invalid_File_Format );
goto Fail;
}
/* replace the four random bytes at the beginning with whitespace */
parser->private_dict[0] = ' ';
parser->private_dict[1] = ' ';
parser->private_dict[2] = ' ';
parser->private_dict[3] = ' ';
parser->root.base = parser->private_dict;
parser->root.cursor = parser->private_dict;
parser->root.limit = parser->root.cursor + parser->private_len;
Fail:
Exit:
return error;
}
T1_Get_Private_Dict( T1_Parser parser,
PSAux_Service psaux )
{
FT_Stream stream = parser->stream;
FT_Memory memory = parser->root.memory;
FT_Error error = 0;
FT_Long size;
if ( parser->in_pfb )
{
/* in the case of the PFB format, the private dictionary can be */
/* made of several segments. We thus first read the number of */
/* segments to compute the total size of the private dictionary */
/* then re-read them into memory. */
FT_Long start_pos = FT_STREAM_POS();
FT_UShort tag;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error )
goto Fail;
if ( tag != 0x8002U )
break;
parser->private_len += size;
if ( FT_STREAM_SKIP( size ) )
goto Fail;
}
/* Check that we have a private dictionary there */
/* and allocate private dictionary buffer */
if ( parser->private_len == 0 )
{
FT_ERROR(( "T1_Get_Private_Dict:" ));
FT_ERROR(( " invalid private dictionary section\n" ));
error = T1_Err_Invalid_File_Format;
goto Fail;
}
if ( FT_STREAM_SEEK( start_pos ) ||
FT_ALLOC( parser->private_dict, parser->private_len ) )
goto Fail;
parser->private_len = 0;
for (;;)
{
error = read_pfb_tag( stream, &tag, &size );
if ( error || tag != 0x8002U )
{
error = T1_Err_Ok;
break;
}
if ( FT_STREAM_READ( parser->private_dict + parser->private_len, size ) )
goto Fail;
parser->private_len += size;
}
}
else
{
/* we have already `loaded' the whole PFA font file into memory; */
/* if this is a memory resource, allocate a new block to hold */
/* the private dict. Otherwise, simply overwrite into the base */
/* dictionary block in the heap. */
/* first of all, look at the `eexec' keyword */
FT_Byte* cur = parser->base_dict;
FT_Byte* limit = cur + parser->base_len;
FT_Byte c;
for (;;)
{
c = cur[0];
if ( c == 'e' && cur + 9 < limit ) /* 9 = 5 letters for `eexec' + */
/* newline + 4 chars */
{
if ( cur[1] == 'e' && cur[2] == 'x' &&
cur[3] == 'e' && cur[4] == 'c' )
{
cur += 6; /* we skip the newling after the `eexec' */
/* XXX: Some fonts use DOS-linefeeds, i.e. \r\n; we need to */
/* skip the extra \n if we find it */
if ( cur[0] == '\n' )
cur++;
break;
}
}
cur++;
if ( cur >= limit )
{
FT_ERROR(( "T1_Get_Private_Dict:" ));
FT_ERROR(( " could not find `eexec' keyword\n" ));
error = T1_Err_Invalid_File_Format;
goto Exit;
}
}
/* now determine where to write the _encrypted_ binary private */
/* dictionary. We overwrite the base dictionary for disk-based */
/* resources and allocate a new block otherwise */
size = (FT_Long)( parser->base_len - ( cur - parser->base_dict ) );
if ( parser->in_memory )
{
/* note that we allocate one more byte to put a terminating `0' */
if ( FT_ALLOC( parser->private_dict, size + 1 ) )
goto Fail;
parser->private_len = size;
}
else
{
parser->single_block = 1;
parser->private_dict = parser->base_dict;
parser->private_len = size;
parser->base_dict = 0;
parser->base_len = 0;
}
/* now determine whether the private dictionary is encoded in binary */
/* or hexadecimal ASCII format -- decode it accordingly */
/* we need to access the next 4 bytes (after the final \r following */
/* the `eexec' keyword); if they all are hexadecimal digits, then */
/* we have a case of ASCII storage */
if ( ( hexa_value( cur[0] ) | hexa_value( cur[1] ) |
hexa_value( cur[2] ) | hexa_value( cur[3] ) ) < 0 )
/* binary encoding -- `simply' copy the private dict */
FT_MEM_COPY( parser->private_dict, cur, size );
else
{
/* ASCII hexadecimal encoding */
FT_Byte* write;
FT_Int count;
write = parser->private_dict;
count = 0;
for ( ;cur < limit; cur++ )
{
int hex1;
/* check for newline */
if ( cur[0] == '\r' || cur[0] == '\n' )
continue;
/* exit if we have a non-hexadecimal digit that isn't a newline */
hex1 = hexa_value( cur[0] );
if ( hex1 < 0 || cur + 1 >= limit )
break;
/* otherwise, store byte */
*write++ = (FT_Byte)( ( hex1 << 4 ) | hexa_value( cur[1] ) );
count++;
cur++;
}
/* put a safeguard */
parser->private_len = write - parser->private_dict;
*write++ = 0;
}
}
/* we now decrypt the encoded binary private dictionary */
psaux->t1_decrypt( parser->private_dict, parser->private_len, 55665U );
parser->root.base = parser->private_dict;
parser->root.cursor = parser->private_dict;
parser->root.limit = parser->root.cursor + parser->private_len;
Fail:
Exit:
return error;
}
