void tst_QBluetoothTransferRequest::initTestCase()
{
    // start Bluetooth if not started
    QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
    device->powerOn();
    delete device;
}
Ejemplo n.º 2
0
MdBluetoothCom::MdBluetoothCom(QObject *parent, QString mdServiceName)
    : MdAbstractCom(parent), sDiscoveryAgent (0), socket (0), sdNeeded(Yes), mdServiceName(mdServiceName)
{

    QBluetoothLocalDevice localDevice;

    // Check if Bluetooth is available on this device
    if (localDevice.isValid()) {

        // Turn Bluetooth on
        localDevice.powerOn();

        // Read local device name
        localDeviceName = localDevice.name();
        qDebug() << "local bluetooth device name: " << localDeviceName;
        // Make it visible to others
        //localDevice.setHostMode(QBluetoothLocalDevice::HostDiscoverable);

        // Get connected devices
        remotes = localDevice.connectedDevices();

        startServiceDiscovery();

    } else {
        qDebug() << "bluetooth not available!";
        emit showStatusMessage( "Bluetooth: not available!" );
    }
}
void tst_QBluetoothLocalDevice::tst_pairDevice()
{
    QFETCH(QBluetoothAddress, deviceAddress);
    QFETCH(QBluetoothLocalDevice::Pairing, pairingExpected);

    QBluetoothLocalDevice localDevice;
    //powerOn if not already
    localDevice.powerOn();

    QSignalSpy pairingSpy(&localDevice, SIGNAL(pairingFinished(const QBluetoothAddress &,QBluetoothLocalDevice::Pairing)) );
    // there should be no signals yet
    QVERIFY(pairingSpy.isEmpty());

    localDevice.requestPairing(deviceAddress, pairingExpected);
    // async, wait for it
    WAIT_FOR_CONDITION(pairingSpy.count(),1);
    QVERIFY(pairingSpy.count() > 0);

    // test the actual signal values.
    QList<QVariant> arguments = pairingSpy.takeFirst();
    QBluetoothAddress address = qvariant_cast<QBluetoothAddress>(arguments.at(0));
    QBluetoothLocalDevice::Pairing pairingResult = qvariant_cast<QBluetoothLocalDevice::Pairing>(arguments.at(1));
    QCOMPARE(deviceAddress, address);
    QCOMPARE(pairingExpected, pairingResult);

    QCOMPARE(pairingExpected, localDevice.pairingStatus(deviceAddress));

}
void MyClass::localDevice() {
//! [turningon]
QBluetoothLocalDevice localDevice;
QString localDeviceName;

// Check if Bluetooth is available on this device
if (localDevice.isValid()) {

    // Turn Bluetooth on
    localDevice.powerOn();

    // Read local device name
    localDeviceName = localDevice.name();

    // Make it visible to others
    localDevice.setHostMode(QBluetoothLocalDevice::HostDiscoverable);

    // Get connected devices
    QList<QBluetoothAddress> remotes;
    remotes = localDevice.connectedDevices();
}
//! [turningon]


}
void tst_QBluetoothLocalDevice::tst_pairDevice()
{
    QFETCH(QBluetoothAddress, deviceAddress);
    QFETCH(QBluetoothLocalDevice::Pairing, pairingExpected);

    if (!QBluetoothLocalDevice::allDevices().count())
        QSKIP("Skipping test due to missing Bluetooth device");

    qDebug() << "tst_pairDevice(): address=" << deviceAddress.toString() << "pairingModeExpected="
            << static_cast<int>(pairingExpected);

    QBluetoothLocalDevice localDevice;
    //powerOn if not already
    localDevice.powerOn();

    QSignalSpy pairingSpy(&localDevice, SIGNAL(pairingFinished(const QBluetoothAddress &,QBluetoothLocalDevice::Pairing)) );
    // there should be no signals yet
    QVERIFY(pairingSpy.isValid());
    QVERIFY(pairingSpy.isEmpty());

    QVERIFY(localDevice.isValid());
    localDevice.requestPairing(deviceAddress, pairingExpected);
    // async, wait for it
    QTRY_VERIFY(pairingSpy.count() > 0);

    // test the actual signal values.
    QList<QVariant> arguments = pairingSpy.takeFirst();
    QBluetoothAddress address = qvariant_cast<QBluetoothAddress>(arguments.at(0));
    QBluetoothLocalDevice::Pairing pairingResult = qvariant_cast<QBluetoothLocalDevice::Pairing>(arguments.at(1));
    QCOMPARE(deviceAddress, address);
    QCOMPARE(pairingExpected, pairingResult);

    QCOMPARE(pairingExpected, localDevice.pairingStatus(deviceAddress));

}
void tst_QBluetoothLocalDevice::tst_powerOff()
{
    if (!QBluetoothLocalDevice::allDevices().count())
        QSKIP("Skipping test due to missing Bluetooth device");

    {
        QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
        device->powerOn();
        delete device;
        // wait for the device to switch bluetooth mode.
        QTest::qWait(1000);
    }
    QBluetoothLocalDevice localDevice;
    QSignalSpy hostModeSpy(&localDevice, SIGNAL(hostModeStateChanged(QBluetoothLocalDevice::HostMode)));
    // there should be no changes yet
    QVERIFY(hostModeSpy.isValid());
    QVERIFY(hostModeSpy.isEmpty());

    localDevice.setHostMode(QBluetoothLocalDevice::HostPoweredOff);
    // async, wait for it
    QTRY_VERIFY(hostModeSpy.count() > 0);
    // we should not be powered off
    QVERIFY(localDevice.hostMode() == QBluetoothLocalDevice::HostPoweredOff);

}
void tst_QBluetoothDeviceInfo::initTestCase()
{
    qRegisterMetaType<QBluetoothDeviceInfo::ServiceClasses>("QBluetoothDeviceInfo::ServiceClasses");
    qRegisterMetaType<QBluetoothDeviceInfo::MajorDeviceClass>("QBluetoothDeviceInfo::MajorDeviceClass");
    // start Bluetooth if not started
    QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
    device->powerOn();
    delete device;
}
Ejemplo n.º 8
0
void tst_QBluetoothServiceInfo::initTestCase()
{
    qRegisterMetaType<QBluetoothUuid::ProtocolUuid>("QBluetoothUuid::ProtocolUuid");
    qRegisterMetaType<QUuid>("QUuid");
    qRegisterMetaType<QBluetoothServiceInfo::Protocol>("QBluetoothServiceInfo::Protocol");
    // start Bluetooth if not started
    QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
    device->powerOn();
    delete device;
}
void tst_QBluetoothLocalDevice::tst_powerOn()
{
    {
    QBluetoothLocalDevice localDevice;

    QSignalSpy hostModeSpy(&localDevice, SIGNAL(hostModeStateChanged(QBluetoothLocalDevice::HostMode)));
    // there should be no changes yet
    QVERIFY(hostModeSpy.isEmpty());

    localDevice.powerOn();
    // async, wait for it
    WAIT_FOR_CONDITION(hostModeSpy.count(),1);
    QVERIFY(hostModeSpy.count() > 0);
    QBluetoothLocalDevice::HostMode hostMode= localDevice.hostMode();
    // we should not be powered off
    QVERIFY(hostMode == QBluetoothLocalDevice::HostConnectable
         || hostMode == QBluetoothLocalDevice::HostDiscoverable);
    }

}
void tst_QBluetoothLocalDevice::tst_powerOn()
{
    QBluetoothLocalDevice localDevice;

    QSignalSpy hostModeSpy(&localDevice, SIGNAL(hostModeStateChanged(QBluetoothLocalDevice::HostMode)));
    // there should be no changes yet
    QVERIFY(hostModeSpy.isValid());
    QVERIFY(hostModeSpy.isEmpty());

    if (!QBluetoothLocalDevice::allDevices().count())
        QSKIP("Skipping test due to missing Bluetooth device");

    localDevice.powerOn();
    // async, wait for it
    QTRY_VERIFY(hostModeSpy.count() > 0);
    QBluetoothLocalDevice::HostMode hostMode= localDevice.hostMode();
    // we should not be powered off
    QVERIFY(hostMode == QBluetoothLocalDevice::HostConnectable
         || hostMode == QBluetoothLocalDevice::HostDiscoverable);
}
void tst_QBluetoothLocalDevice::tst_powerOff()
{
    {
        QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
        device->powerOn();
        delete device;
        // wait for the device to switch bluetooth mode.
        QTest::qWait(1000);
    }
    QBluetoothLocalDevice localDevice;
    QSignalSpy hostModeSpy(&localDevice, SIGNAL(hostModeStateChanged(QBluetoothLocalDevice::HostMode)));
    // there should be no changes yet
    QVERIFY(hostModeSpy.isEmpty());

    localDevice.setHostMode(QBluetoothLocalDevice::HostPoweredOff);
    // async, wait for it
    WAIT_FOR_CONDITION(hostModeSpy.count(),1);
    QVERIFY(hostModeSpy.count() > 0);
    // we should not be powered off
    QVERIFY(localDevice.hostMode() == QBluetoothLocalDevice::HostPoweredOff);

}
void tst_QBluetoothDeviceDiscoveryAgent::initTestCase()
{
    qRegisterMetaType<QBluetoothDeviceInfo>("QBluetoothDeviceInfo");
    qRegisterMetaType<QBluetoothDeviceDiscoveryAgent::InquiryType>("QBluetoothDeviceDiscoveryAgent::InquiryType");

    // turn on BT in case it is not on
    QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
    if (device->hostMode() == QBluetoothLocalDevice::HostPoweredOff) {
        QSignalSpy hostModeSpy(device, SIGNAL(hostModeStateChanged(QBluetoothLocalDevice::HostMode)));
        QVERIFY(hostModeSpy.isEmpty());
        device->powerOn();
        int connectTime = 5000;  // ms
        while (hostModeSpy.count() < 1 && connectTime > 0) {
            QTest::qWait(500);
            connectTime -= 500;
        }
        QVERIFY(hostModeSpy.count() > 0);
    }
    QBluetoothLocalDevice::HostMode hostMode= device->hostMode();
    QVERIFY(hostMode == QBluetoothLocalDevice::HostConnectable
         || hostMode == QBluetoothLocalDevice::HostDiscoverable
         || hostMode == QBluetoothLocalDevice::HostDiscoverableLimitedInquiry);
    delete device;
}
Ejemplo n.º 13
0
Tennis::Tennis(QWidget *parent)
: QDialog(parent), ui(new Ui_Tennis), board(new Board), controller(new Controller), socket(0),
  m_discoveryAgent(new QBluetoothServiceDiscoveryAgent), m_handover(0)
{
    // start Bluetooth if not started
    QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
    device->powerOn();
    delete device;
    device = 0;

    //! [Construct UI]
    ui->setupUi(this);

    isClient = false;
    isConnected = false;
    quickDiscovery = true;

#if defined (Q_OS_SYMBIAN) || defined(Q_OS_WINCE) || defined(Q_WS_MAEMO_5) || defined(Q_WS_MAEMO_6)
    setWindowState(Qt::WindowMaximized);
#endif

    ui->pongView->setScene(board->getScene());    

    connect(ui->pongView, SIGNAL(mouseMove(int, int)), this, SLOT(mouseMove(int, int)));
    ui->pongView->setMouseTracking(false);

    connect(board, SIGNAL(ballCollision(Board::Edge)), controller, SLOT(ballCollision(Board::Edge)));
    connect(board, SIGNAL(scored(Board::Edge)), controller, SLOT(scored(Board::Edge)));
    connect(controller, SIGNAL(moveBall(int,int)), board, SLOT(setBall(int,int)));
    connect(this, SIGNAL(moveLeftPaddle(int)), board, SLOT(setLeftPaddle(int)));
    connect(this, SIGNAL(moveRightPaddle(int)), board, SLOT(setRightPaddle(int)));
    connect(controller, SIGNAL(score(int,int)), board, SLOT(setScore(int,int)));
    connect(controller, SIGNAL(fps(const QString&)), this, SLOT(fps(const QString&)));

    setFocusPolicy(Qt::WheelFocus);

    paddle_pos = (Board::Height-12)/2-Board::Paddle/2;
    endPaddlePos = paddle_pos;

    emit moveLeftPaddle(paddle_pos);
    board->setRightPaddle(paddle_pos);

    server = new TennisServer(this);

    connect(controller, SIGNAL(moveBall(int,int)), server, SLOT(moveBall(int,int)));
    connect(controller, SIGNAL(score(int,int)), server, SLOT(score(int,int)));
    connect(this, SIGNAL(moveLeftPaddle(int)), server, SLOT(moveLeftPaddle(int)));
    connect(server, SIGNAL(clientConnected(QString)), this, SLOT(serverConnected(QString)));
    connect(server, SIGNAL(clientDisconnected(QString)), this, SLOT(serverDisconnected()));
    connect(server, SIGNAL(moveRightPaddle(int)), board, SLOT(setRightPaddle(int)));
    connect(server, SIGNAL(lag(int)), this, SLOT(lagReport(int)));

    connect(server, SIGNAL(clientConnected(QString)), controller, SLOT(refresh()));

    server->startServer();

    client = new TennisClient(this);

    connect(client, SIGNAL(moveBall(int,int)), board, SLOT(setBall(int,int)));
    connect(client, SIGNAL(moveLeftPaddle(int)), board, SLOT(setLeftPaddle(int)));
    connect(client, SIGNAL(connected(QString)), this, SLOT(clientConnected(QString)));
    connect(client, SIGNAL(disconnected()), this, SLOT(clientDisconnected()));
    connect(this, SIGNAL(moveRightPaddle(int)), client, SLOT(moveRightPaddle(int)));
    connect(client, SIGNAL(score(int,int)), board, SLOT(setScore(int,int)));
    connect(client, SIGNAL(lag(int)), this, SLOT(lagReport(int)));

    connect(this, SIGNAL(moveLeftPaddle(int)), controller, SLOT(moveLeftPaddle(int)));
    connect(this, SIGNAL(moveRightPaddle(int)), controller, SLOT(moveRightPaddle(int)));
    connect(server, SIGNAL(moveRightPaddle(int)), controller, SLOT(moveRightPaddle(int)));


//    ui->pongView->setBackgroundBrush(QBrush(Qt::white));
    ui->pongView->setCacheMode(QGraphicsView::CacheBackground);

    QNearFieldManager nearFieldManager;
    if (nearFieldManager.isAvailable()) {
        m_handover = new Handover(server->serverPort(), this);
        connect(m_handover, SIGNAL(bluetoothServiceChanged()), this, SLOT(nearFieldHandover()));

        connect(m_discoveryAgent, SIGNAL(serviceDiscovered(QBluetoothServiceInfo)),
                this, SLOT(serviceDiscovered(QBluetoothServiceInfo)));
        connect(m_discoveryAgent, SIGNAL(finished()), this, SLOT(discoveryFinished()));
    }


    m_discoveryAgent->setUuidFilter(QBluetoothUuid(serviceUuid));


    QString address;
    QString port;
    QStringList args = QCoreApplication::arguments();
    if(args.length() >= 2){
        address = args.at(1);
        if(args.length() >= 3){
            port = args.at(2);
        }
    }

    if(address.isEmpty()){
        QSettings settings("QtDF", "bttennis");
        address = settings.value("lastclient").toString();
    }

    if(!address.isEmpty()){
        qDebug() << "Connect to" << address << port;
        QBluetoothDeviceInfo device = QBluetoothDeviceInfo(QBluetoothAddress(address), "", QBluetoothDeviceInfo::ComputerDevice);
        QBluetoothServiceInfo service;
        if (!port.isEmpty()) {
            QBluetoothServiceInfo::Sequence protocolDescriptorList;
            QBluetoothServiceInfo::Sequence protocol;
            protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::L2cap))
                     << QVariant::fromValue(port.toUShort());
            protocolDescriptorList.append(QVariant::fromValue(protocol));
            service.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
                                 protocolDescriptorList);
            qDebug() << "port" << port.toUShort() << service.protocolServiceMultiplexer();
        }
        else {
            service.setServiceUuid(QBluetoothUuid(serviceUuid));
        }
        service.setDevice(device);
        client->startClient(service);
        board->setStatus("Connecting", 100, 25);
    } else if (nearFieldManager.isAvailable()) {
        board->setStatus(tr("Touch to play"), 100, 25);
    }

    setEnabled(true);

    paddleAnimation = new QPropertyAnimation(this, "paddlePos", this);
    paddleAnimation->setEasingCurve(QEasingCurve::InOutQuad);

    ui->pongView->installEventFilter(this);

}