void CoreAuthHandler::startSsl()
{
#ifdef HAVE_SSL
QSslSocket *sslSocket = qobject_cast<QSslSocket *>(socket());
Q_ASSERT(sslSocket);
qDebug() << qPrintable(tr("Starting encryption for Client:")) << _peer->description();
connect(sslSocket, SIGNAL(sslErrors(const QList<QSslError> &)), SLOT(onSslErrors()));
sslSocket->flush(); // ensure that the write cache is flushed before we switch to ssl (bug 682)
sslSocket->startServerEncryption();
#endif
}
void QHttpNetworkConnectionChannel::_q_error(QAbstractSocket::SocketError socketError)
{
if (!socket)
return;
QNetworkReply::NetworkError errorCode = QNetworkReply::UnknownNetworkError;
switch (socketError) {
case QAbstractSocket::HostNotFoundError:
errorCode = QNetworkReply::HostNotFoundError;
break;
case QAbstractSocket::ConnectionRefusedError:
errorCode = QNetworkReply::ConnectionRefusedError;
break;
case QAbstractSocket::RemoteHostClosedError:
// try to reconnect/resend before sending an error.
// while "Reading" the _q_disconnected() will handle this.
if (state != QHttpNetworkConnectionChannel::IdleState && state != QHttpNetworkConnectionChannel::ReadingState) {
if (reconnectAttempts-- > 0) {
closeAndResendCurrentRequest();
return;
} else {
errorCode = QNetworkReply::RemoteHostClosedError;
}
} else if (state == QHttpNetworkConnectionChannel::ReadingState) {
if (!reply->d_func()->expectContent()) {
// No content expected, this is a valid way to have the connection closed by the server
return;
}
if (reply->contentLength() == -1 && !reply->d_func()->isChunked()) {
// There was no content-length header and it's not chunked encoding,
// so this is a valid way to have the connection closed by the server
return;
}
// ok, we got a disconnect even though we did not expect it
// Try to read everything from the socket before we emit the error.
if (socket->bytesAvailable()) {
// Read everything from the socket into the reply buffer.
// we can ignore the readbuffersize as the data is already
// in memory and we will not receive more data on the socket.
reply->setReadBufferSize(0);
_q_receiveReply();
#ifndef QT_NO_SSL
if (ssl) {
// QT_NO_OPENSSL. The QSslSocket can still have encrypted bytes in the plainsocket.
// So we need to check this if the socket is a QSslSocket. When the socket is flushed
// it will force a decrypt of the encrypted data in the plainsocket.
QSslSocket *sslSocket = static_cast<QSslSocket*>(socket);
qint64 beforeFlush = sslSocket->encryptedBytesAvailable();
while (sslSocket->encryptedBytesAvailable()) {
sslSocket->flush();
_q_receiveReply();
qint64 afterFlush = sslSocket->encryptedBytesAvailable();
if (afterFlush == beforeFlush)
break;
beforeFlush = afterFlush;
}
}
#endif
}
errorCode = QNetworkReply::RemoteHostClosedError;
} else {
errorCode = QNetworkReply::RemoteHostClosedError;
}
break;
case QAbstractSocket::SocketTimeoutError:
// try to reconnect/resend before sending an error.
if (state == QHttpNetworkConnectionChannel::WritingState && (reconnectAttempts-- > 0)) {
closeAndResendCurrentRequest();
return;
}
errorCode = QNetworkReply::TimeoutError;
break;
case QAbstractSocket::ProxyAuthenticationRequiredError:
errorCode = QNetworkReply::ProxyAuthenticationRequiredError;
break;
case QAbstractSocket::SslHandshakeFailedError:
errorCode = QNetworkReply::SslHandshakeFailedError;
break;
default:
// all other errors are treated as NetworkError
errorCode = QNetworkReply::UnknownNetworkError;
break;
}
QPointer<QHttpNetworkConnection> that = connection;
QString errorString = connection->d_func()->errorDetail(errorCode, socket, socket->errorString());
// In the InProgress state the channel should not emit the error.
// This will instead be handled by the connection.
if (!connection->d_func()->shouldEmitChannelError(socket))
return;
// Need to dequeu the request so that we can emit the error.
if (!reply)
connection->d_func()->dequeueRequest(socket);
if (reply) {
reply->d_func()->errorString = errorString;
emit reply->finishedWithError(errorCode, errorString);
reply = 0;
}
// send the next request
QMetaObject::invokeMethod(that, "_q_startNextRequest", Qt::QueuedConnection);
if (that) //signal emission triggered event loop
close();
}
bool ssh::dossh()
{
#ifdef USE_QSSH
{
if(m_connection && m_connection->state() != QSsh::SshConnection::Unconnected)
{
helpers::log("ssh: already connecting...", LOG_INF, qApp, 0);
return true;
}
m_connection = new QSsh::SshConnection(params, this);
connect(m_connection, SIGNAL(connected()), SLOT(onQsshConnected()));
connect(m_connection, SIGNAL(error(QSsh::SshError)), SLOT(onQsshConnectionError(QSsh::SshError)));
helpers::log("ssh: connecting START...", LOG_INF, qApp, 0);
m_connection->connectToHost();
return false;
}
#else
helpers::log("ssh: START: " + QString::number(QSslSocket::supportsSsl()), QSslSocket::supportsSsl() ? LOG_INF : LOG_ERR, qApp, 0);
//http://stackoverflow.com/questions/15213139/simple-qssl-client-server-cannot-start-handshake-on-non-plain-connection
QSslSocket *socket = new QSslSocket(this);
socket->ignoreSslErrors();
socket->setPeerVerifyMode(QSslSocket::VerifyNone);
socket->setProtocol(QSsl::SslV3);
connect(socket, SIGNAL(encrypted()), this, SLOT(ready()));
connect(socket, SIGNAL(encryptedBytesWritten(qint64)), this, SLOT(encryptedBytesWritten(qint64)));
connect(socket, SIGNAL(modeChanged(QSslSocket::SslMode)), this, SLOT(modeChanged(QSslSocket::SslMode)));
connect(socket, SIGNAL(peerVerifyError(const QSslError &)), this, SLOT(peerVerifyError(const QSslError &)));
connect(socket, SIGNAL(sslErrors(const QList<QSslError> &)), this, SLOT(sslErrors(const QList<QSslError> &)));
connect(socket, SIGNAL(connected()), this, SLOT(connected()));
connect(socket, SIGNAL(disconnected()), this, SLOT(disconnected()));
connect(socket, SIGNAL(error(QAbstractSocket::SocketError)), this, SLOT(error(QAbstractSocket::SocketError)));
connect(socket, SIGNAL(hostFound()), this, SLOT(hostFound()));
connect(socket, SIGNAL(proxyAuthenticationRequired(const QNetworkProxy &, QAuthenticator *)), this, SLOT(proxyAuthenticationRequired(const QNetworkProxy &, QAuthenticator *)));
connect(socket, SIGNAL(stateChanged(QAbstractSocket::SocketState)), this, SLOT(stateChanged(QAbstractSocket::SocketState)));
connect(socket, SIGNAL(readyRead()), this, SLOT(readyRead()));
{
{
QFile file( "c:/Users/gherczeg/.ssh/id_boot2docker" );
if( ! file.open( QIODevice::ReadOnly ) )
{
QMessageBox::question(0, "Erreur", "Impossible de charger id_boot2docker");
return;
}
QSslKey key(&file);
file.close();
helpers::log("ssh:keyok: "+QString::number(!key.isNull()), !key.isNull() ? LOG_INF : LOG_ERR, qApp, 0);
socket->setPrivateKey( key );
}
foreach (const QSslCertificate &cert, QSslCertificate::fromPath("c:/Users/gherczeg/.boot2docker/certs/boot2docker-vm/*.pem", QSsl::Pem, QRegExp::Wildcard))
{
helpers::log("ssh:certok1: "+QString::number(!cert.isNull()), !cert.isNull() ? LOG_INF : LOG_ERR, qApp, 0);
socket->setLocalCertificate( cert );
socket->sslConfiguration().caCertificates().append(cert);
socket->addCaCertificate( cert );
socket->addDefaultCaCertificate(cert);
}
}
socket->connectToHostEncrypted("127.0.0.1", 2022);
//socket->connectToHost("127.0.0.1", 2022);
bool bok = socket->waitForEncrypted(100000);
//bool bok = socket->waitForConnected(100000);
if(!bok)
{
helpers::log("ssh:!waited:"+QString::number(bok),LOG_ERR, qApp, 0);
return;
}
helpers::log("ssh:waited4ecnrypt/connect:"+QString::number(bok),LOG_INF, qApp, 0);
socket->startClientEncryption();
bool wait4Read1 = socket->waitForReadyRead(100000);
helpers::log("ssh:wait4Read1:"+QString::number(wait4Read1),wait4Read1 ? LOG_INF : LOG_ERR, qApp, 0);
QString s = "docker: do!";
qint64 written = socket->write(s.toStdString().c_str());
helpers::log("ssh:written:"+QString::number(written),written > 0 ? LOG_INF : LOG_ERR, qApp, 0);
bool flushed = socket->flush();
helpers::log("ssh:flush:"+QString::number(flushed),flushed ? LOG_INF : LOG_ERR, qApp, 0);
bool wait4Write = socket->waitForBytesWritten(100000);
helpers::log("ssh:wait4Write:"+QString::number(wait4Write),wait4Write ? LOG_INF : LOG_ERR, qApp, 0);
bool wait4Read2 = socket->waitForReadyRead(100000);
helpers::log("ssh:wait4Read2:"+QString::number(wait4Read2),wait4Read2 ? LOG_INF : LOG_ERR, qApp, 0);
socket->disconnectFromHost();
#endif
}
