Dubins::Dubins(const QVector2D &posA,
qreal angleA,
const QVector2D &posB,
qreal angleB,
qreal minTurnRadius) :
_posA(posA.toPointF()),
_angleA(angleA),
_posB(posB.toPointF()),
_angleB(angleB),
_minTurnRadius(minTurnRadius),
_isValid(false)
{
_solvePath();
}
float SCgBus::dotPos(const QPointF &point) const
{
// get sector with minimal distance to point
// and calculates relative dot position on it
qreal minDist = -1.f;
qreal result = 0.f;
QPointF np = mapFromScene(point);
for (int i = 1; i < mPoints.size(); i++)
{
QPointF p1 = mPoints[i - 1];
QPointF p2 = mPoints[i];
QVector2D v(p2 - p1);
QVector2D vp(np - p1);
QVector2D vn = v.normalized();
//vp.normalize();
// calculate point on line
QVector2D p = QVector2D(p1) + vn * QVector2D::dotProduct(vn, vp);
if(v.length() == 0)
return result;
qreal dotPos = QVector2D(p.toPointF() - p1).length() / v.length();
if (dotPos < 0.f || dotPos > 1.f)
continue;
// we doesn't need to get real length, because we need minimum
// so we get squared length to make that procedure faster
qreal d = QVector2D(np - p.toPointF()).lengthSquared();
// compare with minimum distance
if (minDist < 0.f || minDist > d)
{
minDist = d;
result = (i - 1) + dotPos;
}
}
return result;
}
void NeuroLinkItem::adjustLinks()
{
QVector2D front(_line.p2());
QVector2D back(_line.p1());
QVector2D center = front + (c2 - front) * 0.33 + (back - front) * 0.1;
foreach (NeuroItem *ni, _incoming)
{
MixinArrow *link = dynamic_cast<MixinArrow *>(ni);
if (link)
link->setLine(link->line().p1(), mapToScene(center.toPointF()));
}
void Car::advance(int phase)
{
if( phase == 0 ) {
return;
}
if( ! scene()->cellBlocked(this) ) {
QRectF carRect = boundingRect();
QVector2D v = QVector2D(targetPoint - startPoint) / 100.0 * progress;
carRect.moveCenter( v.toPointF() + startPoint );
setPos(carRect.topLeft());
progress += progressDelta;
if( progress >= 100 ) {
_direction = targetDirection;
setCell( targetCellRow, targetCellCol );
progress %= 100;
}
update();
}
}
QLineF Geometry::veryLongLine(QPointF const &pointOnLine, QVector2D const &directionVector)
{
qreal const halfLength = 10000;
return QLineF(pointOnLine + halfLength * directionVector.toPointF()
, pointOnLine - halfLength * directionVector.toPointF());
}
/* draw an angle from the current point to b and then to c,
* with a rounded corner of the given radius.
*/
void
KeyboardLayoutWidget::roundedCorner (QPainterPath& path,
QPointF b, QPointF c, double radius)
{
/* we may have 5 point here
* a is the current point
* c is the end point
* and b is the corner
* we will have a rounded corner with radious (maybe adjust by a,b,c position)
*
* a1 is on a-b, and c1 is on b-c
*/
QPointF a = path.currentPosition();
//qDebug() << "current" << a << b << c;
/* make sure radius is not too large */
double dist1 = distance (a, b);
double dist2 = distance (b, c);
//qDebug() << "dist" << dist1 << dist2 << radius;
radius = qMin (radius, qMin (dist1, dist2));
QPointF ba = a - b;
QPointF bc = c - b;
QVector2D na(ba);
QVector2D nc(bc);
na.normalize();
nc.normalize();
qreal cosine = QVector2D::dotProduct(na, nc);
qreal halfcosine = qSqrt((1 + cosine) / 2);
qreal halfsine = qSqrt( 1- halfcosine * halfcosine);
qreal halftan = halfsine / halfcosine;
QPointF a1 = b + na.toPointF() * (radius / halftan);
QPointF c1 = b + nc.toPointF() * (radius / halftan);
QVector2D n = na + nc;
n.normalize();
QPointF ctr = b + n.toPointF() * radius / halfsine;
QRectF arcRect(ctr.x() - radius, ctr.y() - radius, 2 * radius, 2 * radius);
qreal phiA, phiC;
//qDebug() << c1 << ctr << a1;
QVector2D ctra = QVector2D(a1 - ctr);
QVector2D ctrc = QVector2D(c1 - ctr);
ctra.normalize();
ctrc.normalize();
phiA = angle(ctra);
phiC = angle(ctrc);
qreal delta = phiC - phiA;
while (delta > 0)
delta -= 360;
while (delta < -360)
delta += 360;
if (delta <- 180)
delta += 360;
//qDebug() << arcRect << ctra << ctrc << ctr << "degree" << phiA << phiC;
path.lineTo(a1);
path.arcTo(arcRect, phiA, delta);
path.lineTo(c1);
path.lineTo(c);
}
/*! \internal
Draws the line ending with the specified \a painter at the position \a pos. The direction of the
line ending is controlled with \a dir.
*/
void QCPLineEnding::draw(QCPPainter *painter, const QVector2D &pos, const QVector2D &dir) const
{
if (mStyle == esNone)
return;
QVector2D lengthVec(dir.normalized());
if (lengthVec.isNull())
lengthVec = QVector2D(1, 0);
QVector2D widthVec(-lengthVec.y(), lengthVec.x());
lengthVec *= (float)(mLength*(mInverted ? -1 : 1));
widthVec *= (float)(mWidth*0.5*(mInverted ? -1 : 1));
QPen penBackup = painter->pen();
QBrush brushBackup = painter->brush();
QPen miterPen = penBackup;
miterPen.setJoinStyle(Qt::MiterJoin); // to make arrow heads spikey
QBrush brush(painter->pen().color(), Qt::SolidPattern);
switch (mStyle)
{
case esNone: break;
case esFlatArrow:
{
QPointF points[3] = {pos.toPointF(),
(pos-lengthVec+widthVec).toPointF(),
(pos-lengthVec-widthVec).toPointF()
};
painter->setPen(miterPen);
painter->setBrush(brush);
painter->drawConvexPolygon(points, 3);
painter->setBrush(brushBackup);
painter->setPen(penBackup);
break;
}
case esSpikeArrow:
{
QPointF points[4] = {pos.toPointF(),
(pos-lengthVec+widthVec).toPointF(),
(pos-lengthVec*0.8f).toPointF(),
(pos-lengthVec-widthVec).toPointF()
};
painter->setPen(miterPen);
painter->setBrush(brush);
painter->drawConvexPolygon(points, 4);
painter->setBrush(brushBackup);
painter->setPen(penBackup);
break;
}
case esLineArrow:
{
QPointF points[3] = {(pos-lengthVec+widthVec).toPointF(),
pos.toPointF(),
(pos-lengthVec-widthVec).toPointF()
};
painter->setPen(miterPen);
painter->drawPolyline(points, 3);
painter->setPen(penBackup);
break;
}
case esDisc:
{
painter->setBrush(brush);
painter->drawEllipse(pos.toPointF(), mWidth*0.5, mWidth*0.5);
painter->setBrush(brushBackup);
break;
}
case esSquare:
{
QVector2D widthVecPerp(-widthVec.y(), widthVec.x());
QPointF points[4] = {(pos-widthVecPerp+widthVec).toPointF(),
(pos-widthVecPerp-widthVec).toPointF(),
(pos+widthVecPerp-widthVec).toPointF(),
(pos+widthVecPerp+widthVec).toPointF()
};
painter->setPen(miterPen);
painter->setBrush(brush);
painter->drawConvexPolygon(points, 4);
painter->setBrush(brushBackup);
painter->setPen(penBackup);
break;
}
case esDiamond:
{
QVector2D widthVecPerp(-widthVec.y(), widthVec.x());
QPointF points[4] = {(pos-widthVecPerp).toPointF(),
(pos-widthVec).toPointF(),
(pos+widthVecPerp).toPointF(),
(pos+widthVec).toPointF()
};
painter->setPen(miterPen);
painter->setBrush(brush);
painter->drawConvexPolygon(points, 4);
painter->setBrush(brushBackup);
painter->setPen(penBackup);
break;
}
case esBar:
{
painter->drawLine((pos+widthVec).toPointF(), (pos-widthVec).toPointF());
break;
}
case esHalfBar:
{
painter->drawLine((pos+widthVec).toPointF(), pos.toPointF());
break;
}
case esSkewedBar:
{
if (qFuzzyIsNull(painter->pen().widthF()) && !painter->modes().testFlag(QCPPainter::pmNonCosmetic))
{
// if drawing with cosmetic pen (perfectly thin stroke, happens only in vector exports), draw bar exactly on tip of line
painter->drawLine((pos+widthVec+lengthVec*0.2f*(mInverted?-1:1)).toPointF(),
(pos-widthVec-lengthVec*0.2f*(mInverted?-1:1)).toPointF());
} else
{
// if drawing with thick (non-cosmetic) pen, shift bar a little in line direction to prevent line from sticking through bar slightly
painter->drawLine((pos+widthVec+lengthVec*0.2f*(mInverted?-1:1)+dir.normalized()*qMax(1.0f, (float)painter->pen().widthF())*0.5f).toPointF(),
(pos-widthVec-lengthVec*0.2f*(mInverted?-1:1)+dir.normalized()*qMax(1.0f, (float)painter->pen().widthF())*0.5f).toPointF());
}
break;
}
}
}