void run_sample_data()
{
TStopwatch timer;
timer.Start();
const Int_t nev = -1; // number of events to read, -1 - untill CTRL+C
const Int_t trigger = -1; // 1 - onspill, 2 - offspill. -1 - all
TString filename = "sample_data_2.lmd";
TString outputFileName = "output_raw_land.root"; // name of output file
const Int_t refresh = 100000; // refresh rate for saving control histograms
TString parFileName = "params_raw_land.root"; // name of parameter file
const Int_t updateRate = 150000;
const Int_t minStats = 10000; // minimum number of entries for TCAL calibration
const Int_t nModules = 800; // number of photomultipliers (for TCAL calibration)
// Create source with unpackers ----------------------------------------------
TString ntuple_options = "UNPACK:EVENTNO,UNPACK:TRIGGER,RAW";
TString ucesb_dir = getenv("UCESB_DIR");
TString ucesb_path = ucesb_dir + "/../upexps/s438b/s438b";
EXT_STR_h101 ucesb_struct;
R3BUcesbSource* source = new R3BUcesbSource(filename, ntuple_options, ucesb_path, &ucesb_struct, sizeof(ucesb_struct));
source->SetMaxEvents(nev);
source->AddReader(new R3BUnpackReader((EXT_STR_h101_unpack*)&ucesb_struct.unpack, offsetof(EXT_STR_h101, unpack)));
source->AddReader(new R3BNeulandTacquilaReader((EXT_STR_h101_raw_nnp*)&ucesb_struct.nnp, offsetof(EXT_STR_h101, nnp)));
source->AddReader(new R3BLosReader((EXT_STR_h101_LOS*)&ucesb_struct.los, offsetof(EXT_STR_h101, los)));
// ---------------------------------------------------------------------------
// Create online run ---------------------------------------------------------
FairRunOnline* run = new FairRunOnline(source);
run->SetOutputFile(outputFileName.Data());
run->SetRunId(1111);
// ---------------------------------------------------------------------------
// Create ALADIN field map ---------------------------------------------------
R3BAladinFieldMap* magField = new R3BAladinFieldMap("AladinMaps");
Double_t fMeasCurrent = 2500.; // I_current [A]
magField->SetCurrent(fMeasCurrent);
magField->SetScale(1.);
run->SetField(magField);
// ---------------------------------------------------------------------------
// TCAL ----------------------------------------------------------------------
R3BNeulandMapped2CalPar* tcalFill = new R3BNeulandMapped2CalPar("TcalFill");
tcalFill->SetUpdateRate(updateRate);
tcalFill->SetMinStats(minStats);
tcalFill->SetTrigger(trigger);
tcalFill->SetNofModules(nModules);
run->AddTask(tcalFill);
R3BLosMapped2CalPar* losTcalFill = new R3BLosMapped2CalPar("LosTcalFill");
losTcalFill->SetUpdateRate(updateRate);
losTcalFill->SetMinStats(minStats);
losTcalFill->SetNofModules(1, 4);
run->AddTask(losTcalFill);
// ---------------------------------------------------------------------------
// Add analysis task ---------------------------------------------------------
R3BNeulandMappedHist* ana = new R3BNeulandMappedHist("LandRawAna", 1);
run->AddTask(ana);
// ---------------------------------------------------------------------------
// Initialize ----------------------------------------------------------------
run->Init();
FairLogger::GetLogger()->SetLogScreenLevel("INFO");
// ---------------------------------------------------------------------------
// Runtime data base ---------------------------------------------------------
FairRuntimeDb* rtdb = run->GetRuntimeDb();
R3BFieldPar* fieldPar = (R3BFieldPar*)rtdb->getContainer("R3BFieldPar");
fieldPar->SetParameters(magField);
fieldPar->setChanged();
Bool_t kParameterMerged = kTRUE;
FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
parOut->open(parFileName);
rtdb->setOutput(parOut);
rtdb->print();
// ---------------------------------------------------------------------------
// Run -----------------------------------------------------------------------
if(nev < 0)
{
run->Run(nev, 0);
}
else
{
run->Run(0, nev);
}
rtdb->saveOutput();
// ---------------------------------------------------------------------------
timer.Stop();
Double_t rtime = timer.RealTime();
Double_t ctime = timer.CpuTime();
cout << endl << endl;
cout << "Macro finished succesfully." << endl;
cout << "Output file is " << outputFileName << endl;
cout << "Parameter file is " << parFileName << endl;
cout << "Real time " << rtime << " s, CPU time " << ctime << "s" << endl << endl;
if(ana->GetNItemsTotal() > 3800)
{
cout << " Test passed" << endl;
cout << " All ok " << endl;
}
delete run;
}
void r3ball(Int_t nEvents = 1,
TMap& fDetList,
TString Target = "LeadTarget",
Bool_t fVis = kFALSE,
TString fMC = "TGeant3",
TString fGenerator = "box",
Bool_t fUserPList = kFALSE,
Bool_t fR3BMagnet = kTRUE,
Bool_t fCalifaHitFinder = kFALSE,
Bool_t fStarTrackHitFinder = kFALSE,
Double_t fMeasCurrent = 2000.,
TString OutFile = "r3bsim.root",
TString ParFile = "r3bpar.root",
TString InFile = "evt_gen.dat",
double energy1, double energy2)
{
TString dir = getenv("VMCWORKDIR");
TString r3bdir = dir + "/macros";
TString r3b_geomdir = dir + "/geometry";
gSystem->Setenv("GEOMPATH",r3b_geomdir.Data());
TString r3b_confdir = dir + "gconfig";
gSystem->Setenv("CONFIG_DIR",r3b_confdir.Data());
// In general, the following parts need not be touched
// ========================================================================
// ---- Debug option -------------------------------------------------
gDebug = 0;
// ------------------------------------------------------------------------
// ----- Timer --------------------------------------------------------
TStopwatch timer;
timer.Start();
// ------------------------------------------------------------------------
// ----- Create simulation run ----------------------------------------
FairRunSim* run = new FairRunSim();
run->SetName(fMC.Data()); // Transport engine
run->SetOutputFile(OutFile.Data()); // Output file
FairRuntimeDb* rtdb = run->GetRuntimeDb();
FairLogger::GetLogger()->SetLogScreenLevel("DEBUG");
// R3B Special Physics List in G4 case
if ( (fUserPList == kTRUE ) &&
(fMC.CompareTo("TGeant4") == 0)
){
run->SetUserConfig("g4R3bConfig.C");
run->SetUserCuts("SetCuts.C");
}
// ----- Create media -------------------------------------------------
run->SetMaterials("media_r3b.geo"); // Materials
// Magnetic field map type
Int_t fFieldMap = 0;
// Global Transformations
//- Two ways for a Volume Rotation are supported
//-- 1) Global Rotation (Euler Angles definition)
//-- This represent the composition of : first a rotation about Z axis with
//-- angle phi, then a rotation with theta about the rotated X axis, and
//-- finally a rotation with psi about the new Z axis.
Double_t phi,theta,psi;
//-- 2) Rotation in Ref. Frame of the Volume
//-- Rotation is Using Local Ref. Frame axis angles
Double_t thetaX,thetaY,thetaZ;
//- Global Translation Lab. frame.
Double_t tx,ty,tz;
// ----- Create R3B geometry --------------------------------------------
//R3B Cave definition
FairModule* cave= new R3BCave("CAVE");
cave->SetGeometryFileName("r3b_cave.geo");
run->AddModule(cave);
//R3B Target definition
if (fDetList.FindObject("TARGET") ) {
R3BModule* target= new R3BTarget(Target.Data());
target->SetGeometryFileName(((TObjString*)fDetList.GetValue("TARGET"))->GetString().Data());
run->AddModule(target);
}
//R3B SiTracker Cooling definition
if (fDetList.FindObject("VACVESSELCOOL") ) {
R3BModule* vesselcool= new R3BVacVesselCool(Target.Data());
vesselcool->SetGeometryFileName(((TObjString*)fDetList.GetValue("VACVESSELCOOL"))->GetString().Data());
run->AddModule(vesselcool);
}
//R3B Magnet definition
if (fDetList.FindObject("ALADIN") ) {
fFieldMap = 0;
R3BModule* mag = new R3BMagnet("AladinMagnet");
mag->SetGeometryFileName(((TObjString*)fDetList.GetValue("ALADIN"))->GetString().Data());
run->AddModule(mag);
}
//R3B Magnet definition
if (fDetList.FindObject("GLAD") ) {
fFieldMap = 1;
R3BModule* mag = new R3BGladMagnet("GladMagnet", ((TObjString*)fDetList->GetValue("GLAD"))->GetString(), "GLAD Magnet");
run->AddModule(mag);
}
if (fDetList.FindObject("CRYSTALBALL") ) {
//R3B Crystal Calorimeter
R3BDetector* xball = new R3BXBall("XBall", kTRUE);
xball->SetGeometryFileName(((TObjString*)fDetList.GetValue("CRYSTALBALL"))->GetString().Data());
run->AddModule(xball);
}
if (fDetList.FindObject("CALIFA") ) {
// CALIFA Calorimeter
R3BDetector* califa = new R3BCalifa("Califa", kTRUE);
// ((R3BCalifa *)califa)->SelectGeometryVersion(0x438b);
((R3BCalifa *)califa)->SelectGeometryVersion(17);
//Selecting the Non-uniformity of the crystals (1 means +-1% max deviation)
((R3BCalifa *)califa)->SetNonUniformity(.0);
califa->SetGeometryFileName(((TObjString*)fDetList.GetValue("CALIFA"))->GetString().Data());
run->AddModule(califa);
}
// Tracker
if (fDetList.FindObject("TRACKER") ) {
R3BDetector* tra = new R3BTra("Tracker", kTRUE);
tra->SetGeometryFileName(((TObjString*)fDetList.GetValue("TRACKER"))->GetString().Data());
run->AddModule(tra);
}
// STaRTrack
if (fDetList.FindObject("STaRTrack") ) {
R3BDetector* tra = new R3BSTaRTra("STaRTrack", kTRUE);
tra->SetGeometryFileName(((TObjString*)fDetList.GetValue("STaRTrack"))->GetString().Data());
run->AddModule(tra);
}
// DCH drift chambers
if (fDetList.FindObject("DCH") ) {
R3BDetector* dch = new R3BDch("Dch", kTRUE);
dch->SetGeometryFileName(((TObjString*)fDetList.GetValue("DCH"))->GetString().Data());
run->AddModule(dch);
}
// Tof
if (fDetList.FindObject("TOF") ) {
R3BDetector* tof = new R3BTof("Tof", kTRUE);
tof->SetGeometryFileName(((TObjString*)fDetList.GetValue("TOF"))->GetString().Data());
run->AddModule(tof);
}
// mTof
if (fDetList.FindObject("MTOF") ) {
R3BDetector* mTof = new R3BmTof("mTof", kTRUE);
mTof->SetGeometryFileName(((TObjString*)fDetList.GetValue("MTOF"))->GetString().Data());
run->AddModule(mTof);
}
// GFI detector
if (fDetList.FindObject("GFI") ) {
R3BDetector* gfi = new R3BGfi("Gfi", kTRUE);
gfi->SetGeometryFileName(((TObjString*)fDetList.GetValue("GFI"))->GetString().Data());
run->AddModule(gfi);
}
// Land Detector
if (fDetList.FindObject("LAND") ) {
R3BDetector* land = new R3BLand("Land", kTRUE);
land->SetVerboseLevel(1);
land->SetGeometryFileName(((TObjString*)fDetList.GetValue("LAND"))->GetString().Data());
run->AddModule(land);
}
// NeuLand Scintillator Detector
if(fDetList.FindObject("SCINTNEULAND")) {
R3BDetector* land = new R3BLand("Land", kTRUE);
land->SetVerboseLevel(1);
land->SetGeometryFileName(((TObjString*)fDetList.GetValue("SCINTNEULAND"))->GetString().Data());
run->AddModule(land);
}
// MFI Detector
if(fDetList.FindObject("MFI")) {
R3BDetector* mfi = new R3BMfi("Mfi", kTRUE);
mfi->SetGeometryFileName(((TObjString*)fDetList.GetValue("MFI"))->GetString().Data());
run->AddModule(mfi);
}
// PSP Detector
if(fDetList.FindObject("PSP")) {
R3BDetector* psp = new R3BPsp("Psp", kTRUE);
psp->SetGeometryFileName(((TObjString*)fDetList.GetValue("PSP"))->GetString().Data());
run->AddModule(psp);
}
// Luminosity detector
if (fDetList.FindObject("LUMON") ) {
R3BDetector* lumon = new ELILuMon("LuMon", kTRUE);
lumon->SetGeometryFileName(((TObjString*)fDetList.GetValue("LUMON"))->GetString().Data());
run->AddModule(lumon);
}
// ----- Create R3B magnetic field ----------------------------------------
Int_t typeOfMagneticField = 0;
Int_t fieldScale = 1;
Bool_t fVerbose = kFALSE;
//NB: <D.B>
// If the Global Position of the Magnet is changed
// the Field Map has to be transformed accordingly
if (fFieldMap == 0) {
R3BAladinFieldMap* magField = new R3BAladinFieldMap("AladinMaps");
magField->SetCurrent(fMeasCurrent);
magField->SetScale(fieldScale);
if ( fR3BMagnet == kTRUE ) {
run->SetField(magField);
} else {
run->SetField(NULL);
}
} else if(fFieldMap == 1){
R3BGladFieldMap* magField = new R3BGladFieldMap("R3BGladMap");
magField->SetScale(fieldScale);
if ( fR3BMagnet == kTRUE ) {
run->SetField(magField);
} else {
run->SetField(NULL);
}
} //! end of field map section
// ----- Create PrimaryGenerator --------------------------------------
// 1 - Create the Main API class for the Generator
FairPrimaryGenerator* primGen = new FairPrimaryGenerator();
if (fGenerator.CompareTo("ion") == 0 ) {
// R3B Ion Generator
Int_t z = 30; // Atomic number
Int_t a = 65; // Mass number
Int_t q = 0; // Charge State
Int_t m = 1; // Multiplicity
Double_t px = 40./a; // X-Momentum / per nucleon!!!!!!
Double_t py = 600./a; // Y-Momentum / per nucleon!!!!!!
Double_t pz = 0.01/a; // Z-Momentum / per nucleon!!!!!!
R3BIonGenerator* ionGen = new R3BIonGenerator(z,a,q,m,px,py,pz);
ionGen->SetSpotRadius(1,1,0);
// add the ion generator
primGen->AddGenerator(ionGen);
}
if (fGenerator.CompareTo("ascii") == 0 ) {
R3BAsciiGenerator* gen = new R3BAsciiGenerator((dir+"/input/"+InFile).Data());
primGen->AddGenerator(gen);
}
if (fGenerator.CompareTo("box") == 0 ) {
// 2- Define the BOX generator
Double_t pdgId=2212; // proton beam
Double_t theta1= 25.; // polar angle distribution
//Double_t theta2= 7.;
Double_t theta2= 66.;
// Double_t momentum=1.09008; // 500 MeV/c
// Double_t momentum=0.4445834; // 100 MeV/c
Double_t momentum1=TMath::Sqrt(energy1*energy1 + 2*energy1*0.938272046);
Double_t momentum2=TMath::Sqrt(energy2*energy2 + 2*energy2*0.938272046);
FairBoxGenerator* boxGen = new FairBoxGenerator(pdgId, 1);
boxGen->SetThetaRange ( theta1, theta2);
boxGen->SetPRange (momentum1,momentum2);
boxGen->SetPhiRange (0,360.);
//boxGen->SetXYZ(0.0,0.0,-1.5);
boxGen->SetXYZ(0.0,0.0,0.0);
boxGen->SetDebug(kFALSE);
// add the box generator
primGen->AddGenerator(boxGen);
//primGen->SetTarget(0.25, 0.5);
//primGen->SmearVertexZ(kTRUE);
}
if (fGenerator.CompareTo("gammas") == 0 ) {
// 2- Define the CALIFA Test gamma generator
//Double_t pdgId=22; // gamma emission
Double_t pdgId=2212; // proton emission
Double_t theta1= 10.; // polar angle distribution
Double_t theta2= 40.;
//Double_t theta2= 90.;
//Double_t momentum=0.002; // 0.010 GeV/c = 10 MeV/c
Double_t momentumI=0.002; // 0.010 GeV/c = 10 MeV/c
Double_t momentumF=0.002; // 0.010 GeV/c = 10 MeV/c
//Double_t momentumF=0.808065; // 0.808065 GeV/c (300MeV Kin Energy for protons)
//Double_t momentumI=0.31016124; // 0.31016124 GeV/c (50MeV Kin Energy for protons)
//Double_t momentum=0.4442972; // 0.4442972 GeV/c (100MeV Kin Energy for protons)
//Double_t momentum=0.5509999; // 0.5509999 GeV/c (150MeV Kin Energy for protons)
//Double_t momentumI=0.64405; // 0.64405 GeV/c (200MeV Kin Energy for protons)
Int_t multiplicity = 1;
R3BCALIFATestGenerator* gammasGen = new R3BCALIFATestGenerator(pdgId, multiplicity);
gammasGen->SetThetaRange (theta1, theta2);
gammasGen->SetCosTheta();
gammasGen->SetPRange(momentumI,momentumF);
gammasGen->SetPhiRange(-180.,180.);
//gammasGen->SetXYZ(0.0,0.0,-1.5);
//gammasGen->SetXYZ(0.0,0.0,0);
gammasGen->SetBoxXYZ(-0.1,0.1,-0.1,0.1,-0.1,0.1);
//gammasGen->SetLorentzBoost(0.8197505718204776); //beta=0.81975 for 700 A MeV
// add the gamma generator
primGen->AddGenerator(gammasGen);
}
if (fGenerator.CompareTo("r3b") == 0 ) {
R3BSpecificGenerator *pR3bGen = new R3BSpecificGenerator();
// R3bGen properties
pR3bGen->SetBeamInteractionFlag("off");
pR3bGen->SetRndmFlag("off");
pR3bGen->SetRndmEneFlag("off");
pR3bGen->SetBoostFlag("off");
pR3bGen->SetReactionFlag("on");
pR3bGen->SetGammasFlag("off");
pR3bGen->SetDecaySchemeFlag("off");
pR3bGen->SetDissociationFlag("off");
pR3bGen->SetBackTrackingFlag("off");
pR3bGen->SetSimEmittanceFlag("off");
// R3bGen Parameters
pR3bGen->SetBeamEnergy(1.); // Beam Energy in GeV
pR3bGen->SetSigmaBeamEnergy(1.e-03); // Sigma(Ebeam) GeV
pR3bGen->SetParticleDefinition(2212); // Use Particle Pdg Code
pR3bGen->SetEnergyPrim(0.3); // Particle Energy in MeV
Int_t fMultiplicity = 50;
pR3bGen->SetNumberOfParticles(fMultiplicity); // Mult.
// Reaction type
// 1: "Elas"
// 2: "iso"
// 3: "Trans"
pR3bGen->SetReactionType("Elas");
// Target type
// 1: "LeadTarget"
// 2: "Parafin0Deg"
// 3: "Parafin45Deg"
// 4: "LiH"
pR3bGen->SetTargetType(Target.Data());
Double_t thickness = (0.11/2.)/10.; // cm
pR3bGen->SetTargetHalfThicknessPara(thickness); // cm
pR3bGen->SetTargetThicknessLiH(3.5); // cm
pR3bGen->SetTargetRadius(1.); // cm
pR3bGen->SetSigmaXInEmittance(1.); //cm
pR3bGen->SetSigmaXPrimeInEmittance(0.0001); //cm
// Dump the User settings
pR3bGen->PrintParameters();
primGen->AddGenerator(pR3bGen);
}
if (fGenerator.CompareTo("p2p") == 0 ) {
R3Bp2pGenerator* gen = new R3Bp2pGenerator(("/lustre/nyx/fairgsi/mwinkel/r3broot/input/p2p/build/" + InFile).Data());
primGen->AddGenerator(gen);
#if 0
// Coincident gammas
R3BGammaGenerator *gammaGen = new R3BGammaGenerator();
gammaGen->SetEnergyLevel(0, 0.);
gammaGen->SetEnergyLevel(1, 3E-3);
gammaGen->SetEnergyLevel(2, 4E-3);
gammaGen->SetBranchingRatio(2, 1, 0.5);
gammaGen->SetBranchingRatio(2, 0, 0.5);
gammaGen->SetBranchingRatio(1, 0, 1.);
gammaGen->SetInitialLevel(2);
gammaGen->SetLorentzBoost(TVector3(0, 0, 0.777792));
primGen->AddGenerator(gammaGen);
#endif
}
run->SetGenerator(primGen);
//-------Set visualisation flag to true------------------------------------
run->SetStoreTraj(fVis);
FairLogger::GetLogger()->SetLogVerbosityLevel("LOW");
// ----- Initialize CalifaHitFinder task (CrystalCal to Hit) ------------------------------------
if(fCalifaHitFinder) {
R3BCalifaCrystalCal2Hit* califaHF = new R3BCalifaCrystalCal2Hit();
califaHF->SetClusteringAlgorithm(1,0);
califaHF->SetDetectionThreshold(0.000050);//50 KeV
califaHF->SetExperimentalResolution(6.); //percent @ 1 MeV
//califaHF->SetComponentResolution(.25); //sigma = 0.5 MeV
califaHF->SetPhoswichResolution(3.,5.); //percent @ 1 MeV for LaBr and LaCl
califaHF->SelectGeometryVersion(17);
califaHF->SetAngularWindow(0.25,0.25); //[0.25 around 14.3 degrees, 3.2 for the complete calorimeter]
run->AddTask(califaHF);
}
// ----- Initialize StarTrackHitfinder task ------------------------------------
if(fStarTrackHitFinder) {
R3BSTaRTraHitFinder* trackHF = new R3BSTaRTraHitFinder();
//trackHF->SetClusteringAlgorithm(1,0);
trackHF->SetDetectionThreshold(0.000050); //50 KeV
trackHF->SetExperimentalResolution(0.);
//trackHF->SetAngularWindow(0.15,0.15); //[0.25 around 14.3 degrees, 3.2 for the complete calorimeter]
run->AddTask(trackHF);
}
// ----- Initialize simulation run ------------------------------------
run->Init();
// ------ Increase nb of step for CALO
Int_t nSteps = 150000;
TVirtualMC::GetMC()->SetMaxNStep(nSteps);
// ----- Runtime database ---------------------------------------------
R3BFieldPar* fieldPar = (R3BFieldPar*) rtdb->getContainer("R3BFieldPar");
fieldPar->SetParameters(magField);
fieldPar->setChanged();
Bool_t kParameterMerged = kTRUE;
FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
parOut->open(ParFile.Data());
rtdb->setOutput(parOut);
rtdb->saveOutput();
rtdb->print();
// ----- Start run ----------------------------------------------------
if(nEvents > 0) {
run->Run(nEvents);
}
// ----- Finish -------------------------------------------------------
timer.Stop();
Double_t rtime = timer.RealTime();
Double_t ctime = timer.CpuTime();
cout << endl << endl;
cout << "Macro finished succesfully." << endl;
cout << "Output file is " << OutFile << endl;
cout << "Parameter file is " << ParFile << endl;
cout << "Real time " << rtime << " s, CPU time " << ctime
<< "s" << endl << endl;
// ------------------------------------------------------------------------
cout << " Test passed" << endl;
cout << " All ok " << endl;
}
void tamex_multi_pc_ucesb_mh()
{
TStopwatch timer;
timer.Start();
const Int_t nev = 10000; /* number of events to read, -1 - until CTRL+C */
const Int_t trigger = -1; // 1 - onspill, 2 - offspill. -1 - all
/* Create source using ucesb for input ------------------ */
TString filename = "stream://x86l-3";
TString outputFileName = "tamex_text.root";
TString histFileName = "hist_neuland.root"; // name of file with control histograms
const Int_t refresh = 100000; // refresh rate for saving control histograms
TString parFileName = "params_neuland.root"; // name of parameter file
TString ntuple_options = "UNPACK:EVENTNO,UNPACK:TRIGGER,RAW";
TString ucesb_dir = getenv("UCESB_DIR");
TString ucesb_path = ucesb_dir +
"/../upexps/tamex_multi_pc_readout/tamex_multi_pc_readout";
EXT_STR_h101 ucesb_struct;
R3BUcesbSource* source = new R3BUcesbSource(filename, ntuple_options,
ucesb_path, &ucesb_struct, sizeof(ucesb_struct));
source->AddReader(new R3BUnpackReader(&ucesb_struct));
source->AddReader(new R3BNeulandTamexReader(&ucesb_struct));
/* ------------------------------------------------------ */
/* Create online run ------------------------------------ */
FairRunOnline* run = new FairRunOnline(source);
run->SetOutputFile("output.root");
/* ------------------------------------------------------ */
/* Create ALADIN field map ------------------------------ */
R3BAladinFieldMap* magField = new R3BAladinFieldMap("AladinMaps");
Double_t fMeasCurrent = 2500.; // I_current [A]
magField->SetCurrent(fMeasCurrent);
magField->SetScale(1.);
run->SetField(magField);
/* ------------------------------------------------------ */
const Int_t nBarsPerPlane = 50; // number of scintillator bars per plane
const Int_t updateRate = 15000;
const Int_t minStats = 10000; // minimum number of entries for TCAL calibration
const Int_t nPlanes = 1; // number of planes (for TCAL calibration)
// TCAL ----------------------------------------------------------------------
R3BNeulandTcalFill* tcalFill = new R3BNeulandTcalFill("TcalFill");
tcalFill->SetUpdateRate(updateRate);
tcalFill->SetMinStats(minStats);
tcalFill->SetTrigger(trigger);
tcalFill->SetNofModules(nPlanes,nBarsPerPlane, 0);
run->AddTask(tcalFill);
/* Add analysis task ------------------------------------ */
R3BLandRawAna* ana = new R3BLandRawAna("R3BNeulandTamexMappedItem", 1);
run->AddTask(ana);
/* ------------------------------------------------------ */
/* Initialize ------------------------------------------- */
run->Init();
FairLogger::GetLogger()->SetLogScreenLevel("INFO");
/* ------------------------------------------------------ */
/* Runtime data base ------------------------------------ */
/*FairRuntimeDb* rtdb = run->GetRuntimeDb();
R3BFieldPar* fieldPar = (R3BFieldPar*)rtdb->getContainer("R3BFieldPar");
fieldPar->SetParameters(magField);
fieldPar->setChanged();
Bool_t kParameterMerged = kTRUE;
FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
parOut->open(parFileName);
rtdb->setOutput(parOut);
rtdb->print();*/
/* ------------------------------------------------------ */
/* Run -------------------------------------------------- */
run->Run((nev < 0) ? nev : 0, (nev < 0) ? 0 : nev);
/*rtdb->saveOutput();*/
delete run;
/* ------------------------------------------------------ */
timer.Stop();
Double_t rtime = timer.RealTime();
Double_t ctime = timer.CpuTime();
cout << endl << endl;
cout << "Macro finished succesfully." << endl;
cout << "Output file is " << outputFileName << endl;
cout << "Real time " << rtime << " s, CPU time " << ctime << " s"
<< endl << endl;
}
void run(TString runNumber)
{
TStopwatch timer;
timer.Start();
const Int_t nev = -1; // number of events to read, -1 - untill CTRL+C
TString inDir = "/Volumes/Data/kresan/s438b/lmd/"; // directory with lmd files
TString outDir = "/Volumes/Data/kresan/s438b/data/"; // output directory
TString histDir = "/Users/kresan/Sites/"; // web-server directory
TString outputFileName = outDir + runNumber + "_raw.root"; // name of output file
TString histFileName = histDir + "hist_s438b_" + runNumber + "_raw.root"; // name of file with control histograms
const Int_t refresh = 100000; // refresh rate for saving control histograms
TString parFileName = outDir + "params_" + runNumber + "_raw.root"; // name of parameter file
//const Long64_t maxSize = 1 * 1024 * 1024 * 1024; // 1 GByte // file split size
const char *landMappingName = "cfg_neuland_s438b.hh"; // mapping file
const Int_t nBarsPerPlane = 50;
const Int_t updateRate = 150000;
const Int_t minStats = 5000;
const Int_t nModules = 800;
// Create source with unpackers ----------------------------------------------
Int_t iFile = 0;
Int_t kFile = 0;
if(runNumber.Contains("run331"))
{
iFile = 5209;
kFile = 5229;
}
FairLmdSource* source = new FairLmdSource();
char strName[1000];
for(Int_t i = iFile; i < kFile; i++)
{
sprintf(strName, "%s%s_%4d.lmd", inDir.Data(), runNumber.Data(), i);
for(Int_t j = 0; j < 1000; j++) if(' ' == strName[j]) strName[j] = '0';
cout << strName << endl;
source->AddFile(strName);
}
R3BEventHeaderUnpack *event_unpack = new R3BEventHeaderUnpack();
source->AddUnpacker(event_unpack);
// NeuLAND MBS parameters -------------------------------
Short_t type = 94;
Short_t subType = 9400;
Short_t procId = 12;
Short_t subCrate = 0;
Short_t control = 3;
source->AddUnpacker(new R3BLandUnpack(type, subType, procId, subCrate, control));
// ------------------------------------------------------
// LOS MBS parameters -----------------------------------
type = 88;
subType = 8800;
procId = 10;
subCrate = 7;
control = 5;
//source->AddUnpacker(new R3BLosUnpack(type, subType, procId, subCrate, control));
// ------------------------------------------------------
// ---------------------------------------------------------------------------
// Create online run ---------------------------------------------------------
FairRunOnline* run = new FairRunOnline(source);
run->SetOutputFile(outputFileName.Data());
run->SetGenerateHtml(kTRUE, histFileName.Data(), refresh);
// ---------------------------------------------------------------------------
// Create ALADIN field map ---------------------------------------------------
R3BAladinFieldMap* magField = new R3BAladinFieldMap("AladinMaps");
Double_t fMeasCurrent = 2500.; // I_current [A]
magField->SetCurrent(fMeasCurrent);
magField->SetScale(1.);
run->SetField(magField);
// ---------------------------------------------------------------------------
// Channel mapping -----------------------------------------------------------
R3BLandMapping* map = new R3BLandMapping();
map->SetFileName(landMappingName);
map->SetNofBarsPerPlane(nBarsPerPlane);
run->AddTask(map);
// ---------------------------------------------------------------------------
// TCAL ----------------------------------------------------------------------
R3BLandTcalFill* tcalFill = new R3BLandTcalFill("TcalFill");
tcalFill->SetUpdateRate(updateRate);
tcalFill->SetMinStats(minStats);
tcalFill->SetTrigger(2);
tcalFill->SetNofModules(nModules, 50);
run->AddTask(tcalFill);
R3BLosTcalFill* losTcalFill = new R3BLosTcalFill("LosTcalFill");
losTcalFill->SetUpdateRate(updateRate);
losTcalFill->SetMinStats(minStats);
losTcalFill->SetNofModules(20);
//run->AddTask(losTcalFill);
// ---------------------------------------------------------------------------
// Add analysis task ---------------------------------------------------------
R3BLandRawAna* ana = new R3BLandRawAna("LandRawAna", 1);
run->AddTask(ana);
// ---------------------------------------------------------------------------
// Initialize ----------------------------------------------------------------
run->Init();
//((TTree*)gFile->Get("cbmsim"))->SetMaxTreeSize(maxSize);
FairLogger::GetLogger()->SetLogScreenLevel("INFO");
// ---------------------------------------------------------------------------
// Runtime data base ---------------------------------------------------------
FairRuntimeDb* rtdb = run->GetRuntimeDb();
R3BFieldPar* fieldPar = (R3BFieldPar*)rtdb->getContainer("R3BFieldPar");
fieldPar->SetParameters(magField);
fieldPar->setChanged();
Bool_t kParameterMerged = kTRUE;
FairParRootFileIo* parOut = new FairParRootFileIo(kParameterMerged);
parOut->open(parFileName);
rtdb->setOutput(parOut);
rtdb->print();
// ---------------------------------------------------------------------------
// Run -----------------------------------------------------------------------
run->Run(nev, 0);
rtdb->saveOutput();
// ---------------------------------------------------------------------------
timer.Stop();
Double_t rtime = timer.RealTime();
Double_t ctime = timer.CpuTime();
cout << endl << endl;
cout << "Macro finished succesfully." << endl;
cout << "Output file is " << outputFileName << endl;
cout << "Parameter file is " << parFileName << endl;
cout << "Real time " << rtime << " s, CPU time " << ctime << "s" << endl << endl;
}
