Ejemplo n.º 1
0
void CCTsyPrivacyFU::DoSetPrivacyL(const TDesC& aLineName,RMobilePhone::TMobilePhonePrivacy aPrivacySetting)
	{
	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));
	OpenPhoneL();

	RLine line;
	TInt err = line.Open(iPhone, aLineName);
	ASSERT_EQUALS(KErrNone, err)
	CleanupClosePushL(line);
	
	RMobileCall mobileCall;
	err = mobileCall.OpenNewCall(line);
	ASSERT_EQUALS(KErrNone, err)
	CleanupClosePushL(mobileCall);
	
	// EMobileCallSetPrivacy is not passed to LTSY
	// CTSY returns KErrNotSupported immediately
	err = mobileCall.SetPrivacy(aPrivacySetting);
	ASSERT_EQUALS(KErrNotSupported, err);

	AssertMockLtsyStatusL();

	CleanupStack::PopAndDestroy(3, this); // mobileCall, line, this	

	}
Ejemplo n.º 2
0
enum TVerdict CTestOpenCallFrLine::doTestStepL()
	{
	INFO_PRINTF1(_L("Open Call from RLine!"));
    RTelServer server;
	TInt ret = server.Connect();
    TESTCHECK(ret, KErrNone);
   	ret=server.LoadPhoneModule(DSTD_MODULE_NAME);
    TESTCHECK(ret, KErrNone);

	RPhone phone;
    ret = phone.Open(server,DSTD_PHONE_NAME);
    TESTCHECK(ret, KErrNone);

	RLine line;
    ret = line.Open(phone,DSTD_LINE_NAME);
	TESTCHECK(ret, KErrNone);

	RCall call;
	ret = call.OpenNewCall(line);
    TESTCHECK(ret, KErrNone);
	call.Close();

	line.Close();
	phone.Close();
  	ret=server.UnloadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);
    ServerClose(server);

	return TestStepResult();
	}
Ejemplo n.º 3
0
void CCTsyPrivacyFU::DoCancelNotifyPrivacyConfirmationL(const TDesC& aLineName)
	{
	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));
	OpenPhoneL();

	RLine line;
	RMobileCall mobileCall;

	TInt err = line.Open(iPhone, aLineName);
	ASSERT_EQUALS(KErrNone, err)
	CleanupClosePushL(line);
	
	err = mobileCall.OpenNewCall(line);
	ASSERT_EQUALS(KErrNone, err)
    CleanupClosePushL(mobileCall);

 	//-------------------------------------------------------------------------
	// Test cancelling of RMobileCall::NotifyPrivacyConfirmation
 	//-------------------------------------------------------------------------
	TRequestStatus notifyStatus;

	RMobilePhone::TMobilePhonePrivacy privacy;
	mobileCall.NotifyPrivacyConfirmation(notifyStatus,privacy);
	mobileCall.CancelAsyncRequest(EMobileCallNotifyPrivacyConfirmation);
	User::WaitForRequest(notifyStatus);

    ASSERT_EQUALS(KErrCancel, notifyStatus.Int());

	AssertMockLtsyStatusL(); // just in case

	CleanupStack::PopAndDestroy(3); // mobileCall, line, this
	}
/**
@SYMTestCaseID BA-CTSY-ALTC-CNACS-0003
@SYMComponent  telephony_ctsy
@SYMTestCaseDesc Test support in CTSY for RMobileCall::NotifyAlternatingCallSwitch for fax calls
@SYMTestPriority High
@SYMTestActions Invokes RMobileCall::NotifyAlternatingCallSwitch for fax calls
@SYMTestExpectedResults Pass
@SYMTestType CT
*/
void CCTsyAlternatingCallFU::TestNotifyAlternatingCallSwitch0003L()
	{

	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));
	OpenPhoneL();

	RMobileCall mobileCall;
	RLine line;

	TInt err = line.Open(iPhone, KMmTsyFaxLineName);
	ASSERT_EQUALS(KErrNone, err)
    CleanupClosePushL(line);
	
	err = OpenNewCall(line, mobileCall, KMmTsyFaxLineName);
	ASSERT_EQUALS(KErrNone, err)
    CleanupClosePushL(mobileCall);

	TRequestStatus reqStatus;
	mobileCall.NotifyAlternatingCallSwitch(reqStatus);
	User::WaitForRequest(reqStatus);
	ASSERT_EQUALS(KErrNotSupported, reqStatus.Int())

	AssertMockLtsyStatusL();
	CleanupStack::PopAndDestroy(3, this); // mobileCall, line, this
	
	}
Ejemplo n.º 5
0
enum TVerdict CTestErrNewTelObjectIllegalBuffer::doTestStepL()
/** 
Check that CTelSession::NewTelObject fails when an illegal buffer is passed to it for the name of the call.
 (Uses similar code to that in RTelServer::OpenNewCall().)

@return EPass or EFail 
*/
	{
	RTelServer1 server;
	TInt ret = server.Connect();
	TESTCHECK(ret, KErrNone);
	ret=server.LoadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);

	RTelServer::TPhoneInfo phoneInfo;

	ret = server.GetPhoneInfo( 0, phoneInfo );
	TESTCHECK(ret, KErrNone);

	RPhone phone;
	ret = phone.Open( server, phoneInfo.iName );
	TESTCHECK(ret, KErrNone);


	RPhone::TLineInfo lineInfo;
	ret = phone.GetLineInfo( 0, lineInfo );
	TESTCHECK(ret, KErrNone);


	RLine line;
	ret = line.Open( phone, lineInfo.iName );

	char retName;  
		// Illegal buffer.

	RCall1 call;

	// Taken from OpenNewCall(line , retName); 
	RSessionBase* session=&line.SessionHandle();
	call.ConstructL();
	TInt subSessionHandle=line.SubSessionHandle();

	TPtrC name(_L("::"));	// necessary so that server knows to ask TSY for new name

	TIpcArgs args(&name,REINTERPRET_CAST(TDes*,&retName),subSessionHandle);
	call.SetSessionHandle(*session);
	ret = call.CreateSubSession(*session,EEtelOpenFromSubSession,args);
	call.Destruct();

	TESTCHECK(ret, KErrBadDescriptor);

	line.Close();
	phone.Close();

	ret=server.UnloadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);	
	ServerClose(server);
	return TestStepResult();
	}
Ejemplo n.º 6
0
TInt CTestDriveSsFax::DriveETelApiL()
//
// This function contains the real meat of the Client-side test code
//
	{
	_LIT(KFaxLineName,"Fax");
	_LIT(KMmPhoneName,"GsmPhone1");

	RMobilePhone mmPhone;
	INFO_PRINTF1(_L("Opening Multimode Phone\n"));
	TESTL(mmPhone.Open(iServer,KMmPhoneName)==KErrNone);

	RLine faxLine;
	INFO_PRINTF1(_L("Opening Fax Line\n"));
	TESTL(faxLine.Open(iPhone,KFaxLineName)==KErrNone);
 	RCall faxCall;
	INFO_PRINTF1(_L("Opening New fax Call\n"));
	TESTL(faxCall.OpenNewCall(faxLine)==KErrNone);

	TRequestStatus stat1,stat2,reqStatus;
	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);

	// Now wait for an incoming fax call...
	INFO_PRINTF1(_L("Answering a Fax Call\n"));
	RCall::TFaxSessionSettings faxSessionSettings;
	faxSessionSettings.iMode=RCall::EReceive;
	faxSessionSettings.iFaxRetrieveType=RCall::EFaxOnDemand;
	faxSessionSettings.iFaxClass=EClassAuto;
	faxSessionSettings.iFaxId.Zero();
	faxSessionSettings.iMaxSpeed=14400;
	faxSessionSettings.iMinSpeed=12000;
	faxSessionSettings.iRxResolution=EFaxNormal;
	faxSessionSettings.iRxCompression=EModifiedHuffman;
	faxCall.SetFaxSettings(faxSessionSettings);
	faxCall.AnswerIncomingCall(stat2);
	User::After(2000000L);					// Wait for a 2secs to make sure the port is "access denied"

	INFO_PRINTF1(_L("Get Signal Strength\n"));
	TInt32 signalStrength;
	TInt8 bar=0;
	mmPhone.GetSignalStrength(stat1,signalStrength,bar);
	User::WaitForRequest(stat1);
	TESTL(stat1==KErrAccessDenied);			// The port is "access denied" by this time

	User::WaitForRequest(stat2);
	User::After(300000L);
	TESTL(faxCall.HangUp()==KErrNone);
	
	mmPhone.Close();
	faxLine.Close();
	faxCall.Close();
	return KErrNone;
	}
enum TVerdict CTestMemZeroLength::doTestStepL()
	{
	INFO_PRINTF1(_L("Test Zero Length Dials"));
    RTelServer server;
	TInt ret = server.Connect();
    TESTCHECK(ret, KErrNone);
   	ret=server.LoadPhoneModule(DSTD_MODULE_NAME);
    TESTCHECK(ret, KErrNone);

	RPhone phone;
    ret = phone.Open(server,DSTD_PHONE_NAME);
    TESTCHECK(ret, KErrNone);

	RLine line;
    ret = line.Open(phone,DSTD_LINE_NAME);
	TESTCHECK(ret, KErrNone);

	RCall call;
	TName name;
    ret = call.OpenNewCall(line,name);
	TESTCHECK(ret, KErrNone);

	RCall::TTelNumberC number(_L(""));
	TPtrC8 callParams(_L8(""));
	ret=call.Dial(number);
    TESTCHECK(ret, KErrArgument);

	ret=call.Dial(callParams,number);
    TESTCHECK(ret, KErrArgument);

	TRequestStatus status;
	call.Dial(status,number);
	User::WaitForRequest(status);
    TESTCHECK(status.Int(), KErrArgument);

	call.Dial(status,callParams,number);
	User::WaitForRequest(status);
    TESTCHECK(status.Int(), KErrArgument);

	call.Close();
	line.Close();

	INFO_PRINTF1(_L("Passed illegal Cancel Test"));
	INFO_PRINTF1(_L("Test an illegal Cancel"));

// This shouldn't panic
	phone.NotifyModemDetectedCancel();

	phone.Close();
    ServerClose(server);

	INFO_PRINTF1(_L("Passed illegal Cancel Test"));

	return TestStepResult();
	}
void CCTsySessionManagementFU::AuxReferenceCountL(const TDesC &aName)
	{

	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));

	OpenPhoneL();

    TName lineName(aName);    
    RLine line;
    
    TInt ret  = line.Open(iPhone, lineName);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(line);  
    
    TName name;
	RCall call;
    
    ret = OpenNewCall(line, call, lineName, name);    
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call);    

	// test on successful completion
	TInt count = call.ReferenceCount();
    ASSERT_EQUALS(1, count);

	AssertMockLtsyStatusL();

	// test on successful completion, increasing count
	RCall call2;
	
	ret = call2.OpenExistingCall(line, name);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call2);  
	
	count = call.ReferenceCount();
    ASSERT_EQUALS(2, count);

	AssertMockLtsyStatusL();

	// test on successful completion, decreasing count
	CleanupStack::PopAndDestroy(1);

	count = call.ReferenceCount();
    ASSERT_EQUALS(1, count);


	AssertMockLtsyStatusL();
	CleanupStack::PopAndDestroy(3, this); 
	
	}
Ejemplo n.º 9
0
enum TVerdict CTestErrNewTelObjectOk::doTestStepL()
/** 
Check that RTelServer::OpenNewCall returns no errors 
 when it has a large enough valid buffer to put the call name in. 

@return EPass or EFail 
*/
	{
	RTelServer1 server;
	TInt ret = server.Connect();
	TESTCHECK(ret, KErrNone);
	ret=server.LoadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);

	RTelServer::TPhoneInfo phoneInfo;

	ret = server.GetPhoneInfo( 0, phoneInfo );
	TESTCHECK(ret, KErrNone);

	RPhone phone;
	ret = phone.Open( server, phoneInfo.iName );
	TESTCHECK(ret, KErrNone);


	RPhone::TLineInfo lineInfo;
	ret = phone.GetLineInfo( 0, lineInfo );
	TESTCHECK(ret, KErrNone);


	RLine line;
	ret = line.Open( phone, lineInfo.iName );

	TName retName;

	// Check that we can get a name for the newly opened call. 

	RCall call;
	ret = call.OpenNewCall(line , retName); 
	TESTCHECK(ret, KErrNone);

	call.Close();
	line.Close();
	phone.Close();

	ret=server.UnloadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);	
	ServerClose(server);

	return TestStepResult();
	}
Ejemplo n.º 10
0
enum TVerdict CTestErrNewTelObjectSmallBuffer::doTestStepL()
/** 
Check that CTelSession::NewTelObject fails when a small buffer is passed to it for the name of the call.
 (Uses similar code to that in RTelServer::OpenNewCall().)

@return EPass or EFail 
*/
	{
	RTelServer1 server;
	TInt ret = server.Connect();
	TESTCHECK(ret, KErrNone);
	ret=server.LoadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);

	RTelServer::TPhoneInfo phoneInfo;

	ret = server.GetPhoneInfo( 0, phoneInfo );
	TESTCHECK(ret, KErrNone);

	RPhone phone;
	ret = phone.Open( server, phoneInfo.iName );
	TESTCHECK(ret, KErrNone);


	RPhone::TLineInfo lineInfo;
	ret = phone.GetLineInfo( 0, lineInfo );
	TESTCHECK(ret, KErrNone);


	RLine line;
	ret = line.Open( phone, lineInfo.iName );

	TBuf<1> retName;
		//Buffer too small to recieve name.

	RCall call;
	ret = call.OpenNewCall(line , retName); 

	TESTCHECK(ret, KErrOverflow);

	line.Close();
	phone.Close();

	ret=server.UnloadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);	
	ServerClose(server);
	return TestStepResult();
	}
/**
 *  "Outgoing Call" function.  This function will wait until the
 *  Watchers have started and then will make and terminate a call.
 */
void CTelWatchersIntTestOutgoingCallStatusWithPublishSubscribe::OutgoingCallL()
	{
	const TInt KStartupPollPeriod = 1*1000000;
	const TInt KCallActivePeriod  = 5*1000000;

	TInt val(KErrNotFound);

	while (val < KErrNone)
		{
		User::After(KStartupPollPeriod);
		User::LeaveIfError(RProperty::Get(KUidSystemCategory, KUidCurrentCall.iUid, val));
		}

	RTelServer  telServer;

	User::LeaveIfError(telServer.Connect());
	CleanupClosePushL(telServer);

	RPhone  phone;

	User::LeaveIfError(phone.Open(telServer, KPhoneName));
	CleanupClosePushL(phone);

	RLine  line;

	User::LeaveIfError(line.Open(phone, KVoiceLineName));
	CleanupClosePushL(line);

	RCall  call;
	TName  callName;

	User::LeaveIfError(call.OpenNewCall(line, callName));
	CleanupClosePushL(call);

	_LIT(KTelNumber,"1234");

	User::LeaveIfError(call.Dial(KTelNumber));

	User::After(KCallActivePeriod);
	call.HangUp();

	CleanupStack::PopAndDestroy(&call);
	CleanupStack::PopAndDestroy(&line);
	CleanupStack::PopAndDestroy(&phone);
	CleanupStack::PopAndDestroy(&telServer);
	} // CTelWatchersIntTestOutgoingCallStatusWithPublishSubscribe::OutgoingCallL
Ejemplo n.º 12
0
void CTelServerProcessor::GetLineInfoL(RPhone::TLineInfo& aInfo,const TDesC& aPhoneName, TUint aLineType)
        {
        RPhone phone;
        User::LeaveIfError(phone.Open(iTelServer,aPhoneName));
        CleanupClosePushL(phone);
        
        TInt count = 0;
        User::LeaveIfError(phone.EnumerateLines(count));
	if (count <= 0)
		{
    	OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CTELSERVERPROCESSOR_GETLINEINFOL_1,"NetDial:\tGetLineInfoL(): no line info available - leaving with -1");
	        User::Leave(KErrNotFound);
		}
        
        TBool found = EFalse;
	for (TInt i=0; i<count && !found; ++i)
		{
		User::LeaveIfError(phone.GetLineInfo(i,aInfo));
		/* if (aInfo.iLineCapsFlags & aLineType) // Required line found
		        {
		        found=ETrue;
		        } */

		RLine line;
		User::LeaveIfError(line.Open(phone,aInfo.iName));
		CleanupClosePushL(line);

		RLine::TCaps caps;
		User::LeaveIfError(line.GetCaps(caps));
		if (caps.iFlags & aLineType) // Required line found
		        {
		        found=ETrue;
		        }
                CleanupStack::PopAndDestroy(&line);
	
		}

        CleanupStack::PopAndDestroy(&phone);
        if (!found)
        	{
        	OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CTELSERVERPROCESSOR_GETLINEINFOL_2, "NetDial:\tGetLineInfoL(): required line not found - leaving with -1");
	        User::Leave(KErrNotFound);
        	}
        }
Ejemplo n.º 13
0
enum TVerdict CTestOpenLineFrServ::doTestStepL()
	{
	INFO_PRINTF1(_L("Test Open Line From Server"));

    RTelServer server;
	TInt ret = server.Connect();
    TESTCHECK(ret, KErrNone);
   	ret=server.LoadPhoneModule(DSTD_MODULE_NAME);
    TESTCHECK(ret, KErrNone);

	RLine line;
    ret = line.Open(server,DSTD_LINE_FULLNAME);
	TESTCHECK(ret, KErrNone);
	line.Close();

  	ret=server.UnloadPhoneModule(DSTD_MODULE_NAME);
	TESTCHECK(ret, KErrNone);
    ServerClose(server);

	return TestStepResult();
    }
Ejemplo n.º 14
0
void CPubSubMode::TestCallInitiationL(const TDesC& aLineName, TUid aPSCallInitCategory, const TInt aPSCallInitKey)
	{		
	RLine line;
	CleanupClosePushL(line); 
	
	TName callName;
	
	INFO_PRINTF2(_L("Opening %S Line"), &aLineName);

	TInt ret = line.Open(iPhone,aLineName);
	TEST(ret==KErrNone);

	TInt callID = 0;
	RCall call;

	//Test  Initiate call using P&S
	
	line.NotifyIncomingCall(iStatus, callName);	// wait for a call
	
	ret = RProperty::Set(aPSCallInitCategory, aPSCallInitKey, callID);
	TEST(ret == KErrNone);
	callID++;
	
	User::WaitForRequest(iStatus);
	TEST(iStatus == KErrNone);	
	
	//answer the call then hangup.
	ret = call.OpenExistingCall(line, callName);
	TEST(ret == KErrNone);
	call.AnswerIncomingCall(iStatus);
	User::WaitForRequest(iStatus);	
	call.HangUp();
	call.Close();
	
	CleanupStack::PopAndDestroy(); //call	
	}
void CCTsySessionManagementFU::AuxOpenExisting1L(const TDesC &aName)
	{
	
	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));
	OpenPhoneL();

    TName lineName(aName);   
    RLine line;
    
    TInt ret  = line.Open(iPhone, lineName);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(line);  
    
    TName callname;
	RCall call;
	
    ret = OpenNewCall(line, call, lineName, callname);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call);    


	// test on successful completion
	RCall call2;
	
	ret = call2.OpenExistingCall(line, callname);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call2);  
	
	AssertMockLtsyStatusL();

	// test on successful completion (another params set)
    TName name;
    name = lineName;
    name.Append(KDoubleColon);
    name.Append(callname);

	RCall call3;
	
	ret = call3.OpenExistingCall(iPhone, name);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call3);  
	
	AssertMockLtsyStatusL();

	// test on successful completion (another params set)
	RCall call4;

    name = KMmTsyPhoneName;
    name.Append(KDoubleColon);
    name.Append(lineName);
    name.Append(KDoubleColon);
    name.Append(callname);
	
	ret = call4.OpenExistingCall(iTelServer, name);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call4);  

	AssertMockLtsyStatusL();
	
	CleanupStack::PopAndDestroy(6, this); 
		
	}
TInt CTestDriveTwoFaxRx::DriveETelApiL()
//
// This function contains the real meat of the Client-side test code
//
	{
	_LIT(KFaxLineName,"Fax");

	RLine faxLine;
	INFO_PRINTF1(_L("Opening Fax Line\n"));
	TESTL(faxLine.Open(iPhone,KFaxLineName)==KErrNone);

	TRequestStatus stat1,stat2,reqStatus;
	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);

// Now wait for an incoming fax call...
	INFO_PRINTF1(_L("Waiting for an incoming fax call\n"));
	TName callName;
	faxLine.NotifyIncomingCall(stat1,callName);
	User::WaitForRequest(stat1);
	TESTL(stat1==KErrNone);

	RCall faxCall;
	INFO_PRINTF1(_L("Opening Fax Call to answer\n"));
	TESTL(faxCall.OpenNewCall(faxLine)==KErrNone);

	INFO_PRINTF1(_L("Answering a Fax Call\n"));
	RCall::TFaxSessionSettings faxSessionSettings;
	faxSessionSettings.iMode=RCall::EReceive;
	faxSessionSettings.iFaxRetrieveType=RCall::EFaxOnDemand;
	faxSessionSettings.iFaxClass=EClassAuto;
	faxSessionSettings.iFaxId.Zero();
	faxSessionSettings.iMaxSpeed=14400;
	faxSessionSettings.iMinSpeed=12000;
	faxSessionSettings.iRxResolution=EFaxNormal;
	faxSessionSettings.iRxCompression=EModifiedHuffman;
	faxCall.SetFaxSettings(faxSessionSettings);
	faxCall.AnswerIncomingCall(stat2);
	User::WaitForRequest(stat2);
	User::After(300000L);
	TESTL(faxCall.HangUp()==KErrNone);
	faxCall.Close();

// Now wait for a second incoming fax call...
	INFO_PRINTF1(_L("Waiting for a second incoming fax call\n"));
	TName callName2;
	faxLine.NotifyIncomingCall(stat1,callName2);
	User::WaitForRequest(stat1);
	TESTL(stat1==KErrNone);

	RCall faxCall2;
	INFO_PRINTF1(_L("Opening Fax Call to answer\n"));
	TESTL(faxCall2.OpenNewCall(faxLine)==KErrNone);

	INFO_PRINTF1(_L("Answering a Fax Call\n"));
	faxSessionSettings.iMode=RCall::EReceive;
	faxSessionSettings.iFaxRetrieveType=RCall::EFaxOnDemand;
	faxSessionSettings.iFaxClass=EClassAuto;
	faxSessionSettings.iFaxId.Zero();
	faxSessionSettings.iMaxSpeed=14400;
	faxSessionSettings.iMinSpeed=12000;
	faxSessionSettings.iRxResolution=EFaxNormal;
	faxSessionSettings.iRxCompression=EModifiedHuffman;
	faxCall2.SetFaxSettings(faxSessionSettings);
	faxCall2.AnswerIncomingCall(stat2);
	User::WaitForRequest(stat2);
	User::After(300000L);
	TESTL(faxCall2.HangUp()==KErrNone);
	faxCall2.Close();

	faxLine.Close();
	return KErrNone;
	}
Ejemplo n.º 17
0
static void DialNumberL(PktBuf &in, PktBuf &out) {
	/// @todo maybe use a CActive object to allow the call to be cancelled from gammu
	TBuf<100> aPhoneNumber;

	in >> aPhoneNumber;

	cons->Printf( _L("dialing... number:\n") );
	cons->Printf( aPhoneNumber );
	cons->Printf( _L("\n") );

	TName newCallName = _L("call");

	//Create a connection to the tel server
	RTelServer server;
	CleanupClosePushL(server);
	User::LeaveIfError(server.Connect());

	//Load in the phone device driver
	User::LeaveIfError(server.LoadPhoneModule(KTsyName));
	
	//Find the number of phones available from the tel server
	TInt numberPhones;
	User::LeaveIfError(server.EnumeratePhones(numberPhones));

	//Check there are available phones
	if (numberPhones < 1)
	{
		User::Leave(KErrNotFound);
	}

	//Get info about the first available phone
	RTelServer::TPhoneInfo info;
	User::LeaveIfError(server.GetPhoneInfo(0, info));

	//Use this info to open a connection to the phone, the phone is identified by its name
	RPhone phone;
	CleanupClosePushL(phone);
	User::LeaveIfError(phone.Open(server, info.iName));

	//Get info about the first line from the phone
	RPhone::TLineInfo lineInfo;
	User::LeaveIfError(phone.GetLineInfo(0, lineInfo));

	//Use this to open a line
	RLine line;
	CleanupClosePushL(line);
	User::LeaveIfError(line.Open(phone, lineInfo.iName));

	//Open a new call on this line
	RCall call;
	CleanupClosePushL(call);
	User::LeaveIfError(call.OpenNewCall(line, newCallName));

	if ((call.Dial(aPhoneNumber) == KErrNone))
	{
		TRequestStatus iStatus;
		RCall::TStatus iLineStatus;
		line.NotifyStatusChange(iStatus, iLineStatus);
		User::WaitForRequest(iStatus);
	}

	CleanupStack::PopAndDestroy(4);//phone, line, call

	//Unload the phone device driver
	User::LeaveIfError(server.UnloadPhoneModule(KTsyName));

	out << (TUint16)GNAPPLET_MSG_PHONEBOOK_DIAL_RESP;
	out << (TUint16)GN_ERR_NONE;
}
Ejemplo n.º 18
0
void CCTsyPrivacyFU::DoNotifyPrivacyConfirmationL(const TDesC& aLineName)
	{
	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));
	OpenPhoneL();

	RLine line;
	RMobileCall mobileCall;

	TInt err = line.Open(iPhone, aLineName);
	ASSERT_EQUALS(KErrNone, err)
	CleanupClosePushL(line);
	
	err = mobileCall.OpenNewCall(line);
	ASSERT_EQUALS(KErrNone, err)
	CleanupClosePushL(mobileCall);

 	//-------------------------------------------------------------------------
	// TEST C: Successful completion request of
	// RMobileCall::NotifyPrivacyConfirmation when result is not cached.
 	//-------------------------------------------------------------------------

	// invoke RMobilePhone::NotifyPrivacyConfirmation
	TRequestStatus notifyStatus;

	// initialize the variable to be set by CTSY with the value other than passed to MockLTSY
	RMobilePhone::TMobilePhonePrivacy privacy = RMobilePhone::EPrivacyOn;
	mobileCall.NotifyPrivacyConfirmation(notifyStatus,privacy);

	// prepare the data to be returned from MockLTSY
	RMobilePhone::TMobilePhonePrivacy privacySetting = RMobilePhone::EPrivacyUnspecified;
	TMockLtsyCallData1<RMobilePhone::TMobilePhonePrivacy> privacySettingData(privacySetting);

	RBuf8 data;
	CleanupClosePushL(data);
	privacySettingData.SerialiseL(data);

	// trigger EMobileCallNotifyPrivacyConfirmation completion via MockLTSY 
	TRequestStatus mockLtsyStatus;
	iMockLTSY.NotifyTerminated(mockLtsyStatus); 
	iMockLTSY.CompleteL(EMobileCallNotifyPrivacyConfirmation, KErrNone,data);
	User::WaitForRequest(mockLtsyStatus);
	ASSERT_EQUALS(KErrNone,mockLtsyStatus.Int());

	// wait for RMobilePhone::NotifyPrivacyConfirmation completion
	User::WaitForRequest(notifyStatus);

	ASSERT_EQUALS(KErrNone,notifyStatus.Int());
	ASSERT_EQUALS(RMobilePhone::EPrivacyUnspecified, privacy);
	AssertMockLtsyStatusL();
	
 	//-------------------------------------------------------------------------
	// TEST E: Unsolicited completion of RMobileCall::NotifyPrivacyConfirmation
	// from LTSY.
 	//-------------------------------------------------------------------------

	iMockLTSY.NotifyTerminated(mockLtsyStatus); 
	iMockLTSY.CompleteL(EMobileCallNotifyPrivacyConfirmation, KErrNone,data);
	User::WaitForRequest(mockLtsyStatus);
	ASSERT_EQUALS(KErrNone,mockLtsyStatus.Int());
	AssertMockLtsyStatusL();

	CleanupStack::PopAndDestroy(4, this); // data, mobileCall, line, this
	}
TInt CTestDriveDataCallRemoteTerm::DriveETelApiL()
/**
 * This method contains the real meat of the Client-side the "Data Call set-up, data 
 * transfer and remote termination" test code.  This method sets up to make a data-call
 * and then transfer data.  After the data transfer, the call is terminated by the remote end.
 *
 * @return KErrNone.
 */
	{
	_LIT(KMmPhoneName,"GsmPhone1");
	_LIT(KDataLineName,"Data");

	INFO_PRINTF1(_L("Opening Mobile Phone\n"));
	RMobilePhone mmPhone;
	TESTL(mmPhone.Open(iServer,KMmPhoneName)==KErrNone);

	RLine line;
	INFO_PRINTF1(_L("Opening Data Line\n"));
	TESTL(line.Open(iPhone,KDataLineName)==KErrNone);

	INFO_PRINTF1(_L("Opening New Data Call\n"));
	RCall call;
	TESTL(call.OpenNewCall(line)==KErrNone);

	TRequestStatus reqStatus;
	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);

	// dial
	_LIT(KDialString,"+1234");
	TESTL(call.Dial(KDialString)==KErrNone);

	INFO_PRINTF1(_L("Loan Data Call Port to Comm Server\n"));
	RCall::TCommPort commPort;
	TESTL(call.LoanDataPort(commPort)==KErrNone);

	RCommServ cs;
	TESTL(cs.Connect()==KErrNone);

	RComm port;
	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	// Transfer data
	TRequestStatus stat;
	port.Write(stat,KWriteTestRemoteData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port
    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem
    User::After(500000);		

	port.Write(stat,KWriteTestRemoteData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

	// Remote termination of call should have occurred in scripts, 
	// close port and comm server
	port.Close();
	cs.Close();
	INFO_PRINTF1(_L("Reclaim Data Call Port from Comm Server\n"));
	TESTL(call.RecoverDataPort()==KErrNone);

	TInt32 ss;
	TInt8 bar=0;
	mmPhone.GetSignalStrength(stat,ss,bar);
	User::WaitForRequest(stat);
	TESTL(stat==KErrNone);

	// close iPhone, line and call
	mmPhone.Close();
	line.Close();
	call.Close();
	return KErrNone;
	}
Ejemplo n.º 20
0
TInt CTestDriveSSData::DriveETelApiL()
//
// This function contains the real meat of the Client-side test code
//
	{
	_LIT(KDataLineName,"Data");
	_LIT(KMmPhoneName,"GsmPhone1");

	RMobilePhone mmPhone;
	INFO_PRINTF1(_L("Opening Multimode Phone\n"));
	TESTL(mmPhone.Open(iServer,KMmPhoneName)==KErrNone);

	RLine line;
	INFO_PRINTF1(_L("Opening Data Line\n"));
	TESTL(line.Open(iPhone,KDataLineName)==KErrNone);

	INFO_PRINTF1(_L("Opening New Data Call\n"));
	RSpecialCall call;
	TESTL(call.OpenNewCall(line)==KErrNone);

	TRequestStatus stat,stat1,reqStatus;

	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);

	_LIT(KDialString,"+1234");
	TInt status = call.Dial(KDialString);
	TESTL(status == KErrNone);

	TInt32 signalStrength;
	TInt8 bar = 0;
	mmPhone.GetSignalStrength(stat1,signalStrength,bar);

	RCall::TCommPort commPort;
	TESTL(call.LoanDataPort(commPort)==KErrNone);

	RCommServ cs;
	TESTL(cs.Connect()==KErrNone);

	RComm port;
	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	port.Write(stat,KDataSsWriteTestData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port
    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem
    User::After(500000);		

	port.Write(stat,KDataSsWriteTestData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

	port.Close();
	cs.Close();

	call.RecoverDataPort();

	User::After(500000L);

	User::WaitForRequest(stat1); // Result of GetSignalStrength()
	TESTL(stat1==KErrAccessDenied);

	TESTL(call.HangUp()==KErrNone);

	mmPhone.Close();
	line.Close();
	call.Close();
	return KErrNone;
	}
void CCTsySessionManagementFU::AuxOpenExisting3L(const TDesC &aName)
	{
	OpenEtelServerL(EUseExtendedError);
	CleanupStack::PushL(TCleanupItem(Cleanup,this));
	OpenPhoneL();

    TName lineName(aName);    
    RLine line;
    
    TInt ret  = line.Open(iPhone, lineName);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(line);  
    
    TName callname;
	RCall call;
	
    ret = OpenNewCall(line, call, lineName, callname);
    ASSERT_EQUALS(KErrNone, ret);
    CleanupClosePushL(call);    


	// test on bad call name

	_LIT(KBadCallName, "BadCallName");

	RCall call2;
	
	ret = call2.OpenExistingCall(line, KBadCallName);
    ASSERT_EQUALS(KErrNotFound, ret);
	
	AssertMockLtsyStatusL();


	// test on bad line name

	_LIT(KBadLineName, "BadLineName");

    TName name;
    name = KBadLineName;
    name.Append(KDoubleColon);
    name.Append(callname);

	ret = call2.OpenExistingCall(iPhone, name);
    ASSERT_EQUALS(KErrNotSupported, ret);
	
	AssertMockLtsyStatusL();


	// test on bad call name and correct line

    name = lineName;
    name.Append(KDoubleColon);
    name.Append(KBadCallName);

	ret = call2.OpenExistingCall(iPhone, name);
    ASSERT_EQUALS(KErrNotFound, ret);
	
	AssertMockLtsyStatusL();


	// test on bad phone name

	_LIT(KBadPhoneName, "BadPhoneName");

    name = KBadPhoneName;
    name.Append(KDoubleColon);
    name.Append(lineName);
    name.Append(KDoubleColon);
    name.Append(callname);
	
	ret = call2.OpenExistingCall(iTelServer, name);
    ASSERT_EQUALS(KErrNotFound, ret);

	AssertMockLtsyStatusL();


	// test on bad line name and correct phone

    name = KMmTsyPhoneName;
    name.Append(KDoubleColon);
    name.Append(KBadLineName);
    name.Append(KDoubleColon);
    name.Append(callname);
	
	ret = call2.OpenExistingCall(iTelServer, name);
    ASSERT_EQUALS(KErrNotSupported, ret);

	AssertMockLtsyStatusL();


	// test on bad call name with correct phone and line

    name = KMmTsyPhoneName;
    name.Append(KDoubleColon);
    name.Append(lineName);
    name.Append(KDoubleColon);
    name.Append(KBadCallName);
	
	ret = call2.OpenExistingCall(iTelServer, name);
    ASSERT_EQUALS(KErrNotFound, ret);


	// test on string analyze

	_LIT(KBad, "::::::::");

    name = KBad;
	
	ret = call2.OpenExistingCall(iTelServer, name);
    ASSERT_EQUALS(KErrNotFound, ret);

	AssertMockLtsyStatusL();
	
	CleanupStack::PopAndDestroy(3, this); 
	
	}
TInt CTestDriveRemoteHangupDial::DriveETelApiL()
/**
 * This method contains the real meat of the Client-side "Data Call answer and remote 
 * hang-up closely followed by a dial" test code.  This method sets up to answer a 
 * call and receive a data transfer.  The call is then terminated from the remote end, 
 * and then must quickly respond by dialing the remote end back.  Data is then 
 * transfered and the call is terminated again from the remote end.
 *
 * @return KErrNone.
 */
	{
	_LIT(KMmPhoneName,"GsmPhone1");
	_LIT(KDataLineName,"Data");

	INFO_PRINTF1(_L("Opening Mobile Phone\n"));
	RMobilePhone mmPhone;
	TESTL(mmPhone.Open(iServer,KMmPhoneName)==KErrNone);

	RLine line;
	INFO_PRINTF1(_L("Opening Data Line\n"));
	TESTL(line.Open(iPhone,KDataLineName)==KErrNone);

	INFO_PRINTF1(_L("Opening New Data Call\n"));
	RCall call;
	TESTL(call.OpenNewCall(line)==KErrNone);

	TRequestStatus reqStatus;
	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);
//
// Initialization complete
//

// Now wait for an incoming call...
	INFO_PRINTF1(_L("Wait to Answer incoming Data Call\n"));
	TESTL(call.AnswerIncomingCall()==KErrNone);

	INFO_PRINTF1(_L("Loan Data Call Port to Comm Server\n"));
	RCall::TCommPort commPort;
	TESTL(call.LoanDataPort(commPort)==KErrNone);

	RCommServ cs;
	TESTL(cs.Connect()==KErrNone);

	RComm port;
	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	// Transfer data
	TRequestStatus stat;
	port.Write(stat,KWriteTestRemoteHangupData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);
    
   //-- a small delay between successive writes to the COM port
    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem
    User::After(500000);		

	port.Write(stat,KWriteTestRemoteHangupData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

	// Remote termination of call should have occurred in scripts, 
	// close port and comm server
	port.Close();
	cs.Close();
	INFO_PRINTF1(_L("Reclaim Data Call Port from Comm Server\n"));
	TESTL(call.RecoverDataPort()==KErrNone);

	// Now perform the user specified delay before making outgoing call...
	INFO_PRINTF2(_L("Start the %d sec delay before making outgoing call\n"), iVarDelay);
	User::After( (TTimeIntervalMicroSeconds32)(iVarDelay*1000000L) );
	INFO_PRINTF2(_L("End of the delay before making outgoing call\n"), iVarDelay);

	// Now perform the outgoing call...
	// dial
	_LIT(KDialString,"+1234");
	TESTL(call.Dial(KDialString)==KErrNone);

	INFO_PRINTF1(_L("Loan Data Call Port to Comm Server\n"));
	TESTL(call.LoanDataPort(commPort)==KErrNone);

	TESTL(cs.Connect()==KErrNone);

	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	// Transfer data
	port.Write(stat,KWriteTestRemoteHangupData2);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port
    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem
    User::After(500000);		

	port.Write(stat,KWriteTestRemoteHangupData2);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

	// Remote termination of call should have occurred in scripts, 
	// close port and comm server
	port.Close();
	cs.Close();
	INFO_PRINTF1(_L("Reclaim Data Call Port from Comm Server\n"));
	TESTL(call.RecoverDataPort()==KErrNone);

	TInt32 ss;
	TInt8 bar=0;
	mmPhone.GetSignalStrength(stat,ss,bar);
	User::WaitForRequest(stat);
	TESTL(stat==KErrNone);

	// close iPhone, line and call
	mmPhone.Close();
	line.Close();
	call.Close();
	return KErrNone;
	}
TInt CTestDriveDataCallCallBack::DriveETelApiL()
/**
 * This method contains the real meat of the Client-side "Data Call dial-up networking 
 * call-back" test code.  This method sets up an outgoing data-call write test that is 
 * terminated from the remote end.  The test then quickly responds to an incoming call.  
 * Data is received and the call is terminated again from the remote end.
 */
	{
	_LIT(KDataLineName,"Data");

	INFO_PRINTF1(_L("Opening Mobile Phone\n"));

	RLine line;
	INFO_PRINTF1(_L("Opening Data Line\n"));
	TESTL(line.Open(iPhone,KDataLineName)==KErrNone);

	INFO_PRINTF1(_L("Opening New Data Call\n"));
	RCall call;
	TESTL(call.OpenNewCall(line)==KErrNone);

	TRequestStatus reqStatus;
	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	iPhone.InitialiseMM(reqStatus , tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);

	// dial
	_LIT(KDialString,"+1234");
	TESTL(call.Dial(KDialString)==KErrNone);

	INFO_PRINTF1(_L("Loan Data Call Port to Comm Server\n"));
	RCall::TCommPort commPort;
	TESTL(call.LoanDataPort(commPort)==KErrNone);

	RCommServ cs;
	TESTL(cs.Connect()==KErrNone);

	RComm port;
	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	// Transfer data
	TRequestStatus stat;
	port.Write(stat,KWriteTestCallBackData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port
    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem
    User::After(500000);		

	port.Write(stat,KWriteTestCallBackData);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

	// Remote termination of call should have occurred in scripts, 
	// close port and comm server
	port.Close();
	cs.Close();
	INFO_PRINTF1(_L("Reclaim Data Call Port from Comm Server\n"));
	TESTL(call.RecoverDataPort()==KErrNone);

	// Now wait for an incoming call...
	INFO_PRINTF1(_L("Wait to Answer incoming Data Call\n"));
	TESTL(call.AnswerIncomingCall()==KErrNone);

	INFO_PRINTF1(_L("Loan Data Call Port to Comm Server\n"));
	TESTL(call.LoanDataPort(commPort)==KErrNone);

	TESTL(cs.Connect()==KErrNone);
	TESTL(port.Open(cs,commPort.iPort,ECommShared)==KErrNone);

	port.Write(stat,KWriteTestCallBackData2);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

    //-- a small delay between successive writes to the COM port
    //-- I had to insert it to fix mistiming between script execution and sending AT-commands to modem
    User::After(500000);		

	port.Write(stat,KWriteTestCallBackData2);
	User::WaitForRequest(stat);
	TESTL(stat.Int()==KErrNone);

	// Remote termination of call should have occurred in scripts, 
	// close port and comm server
	port.Close();
	cs.Close();
	INFO_PRINTF1(_L("Reclaim Data Call Port from Comm Server\n"));
	TESTL(call.RecoverDataPort()==KErrNone);

	TInt32 ss;
	TInt8 bar;
	iPhone.GetSignalStrength(stat,ss,bar);
	//	mmPhone.GetSignalStrength(stat,ss,bar);
	User::WaitForRequest(stat);
	TESTL(stat==KErrNone);

	// close iPhone, line and call
	line.Close();
	call.Close();
	return KErrNone;
	}
TInt CTestDriveOOMVoiceCall::DoTestL(TInt aAllocFailNumber)
	{
	_LIT(KPhoneModule,"MM");
	_LIT(KPhoneName,  "GsmPhone1");
	_LIT(KLineName,   "Voice");

	RTelServer telServer;
	TInt ret=telServer.Connect();
	if(ret!=KErrNone)
		return ret;

	telServer.__DbgFailNext(aAllocFailNumber);

	ret=telServer.LoadPhoneModule(KPhoneModule);
	if(ret!=KErrNone)
		{
		telServer.Close();
		return ret;
		}

	RMobilePhone mobilePhone;
	ret=mobilePhone.Open(telServer, KPhoneName);
	if(ret!=KErrNone)
		{
		mobilePhone.Close();
		telServer.Close();
		return ret;
		}

	RLine line;
	INFO_PRINTF1(_L("Opening Voice Line"));
	ret=line.Open(mobilePhone,KLineName);
	if(ret!=KErrNone)
		{
		line.Close();
		mobilePhone.Close();
		telServer.Close();
		return ret;
		}

	INFO_PRINTF1(_L("Opening New Voice Call"));
	RCall call;
	ret=call.OpenNewCall(line);
	if(ret!=KErrNone)
		{
		call.Close();
		line.Close();
		mobilePhone.Close();
		telServer.Close();
		return ret;
		}

	INFO_PRINTF1(_L("Initialise the Phone..."));
	
	TRequestStatus reqStatus;
	RMobilePhone::TMMTableSettings tableSettings;
	tableSettings.iLocId=KInternetAccessPoint;
	RMobilePhone::TMMTableSettingsPckg tableSettingsPckg(tableSettings);
	mobilePhone.InitialiseMM(reqStatus, tableSettingsPckg); 	
	User::WaitForRequest(reqStatus);
	TESTL(reqStatus == KErrNone);

	if(reqStatus!=KErrNone)
		{
		call.Close();
		line.Close();
		mobilePhone.Close();
		telServer.Close();
		return ret;
		}

	INFO_PRINTF1(_L("Dial a number..."));
	_LIT(KDialString, "+1234");
	ret=call.Dial(KDialString);
	if(ret!=KErrNone)
		{
		call.Close();
		line.Close();
		mobilePhone.Close();
		telServer.Close();
		return ret;
		}

	INFO_PRINTF1(_L("Hangup a call..."));
	ret=call.HangUp();
	if(ret!=KErrNone)
		{
		call.Close();
		line.Close();
		mobilePhone.Close();
		telServer.Close();
		return ret;
		}

	INFO_PRINTF1(_L("Close the call, line & iPhone..."));
	call.Close();
	line.Close();
	mobilePhone.Close();

	return KErrNone;
	}