void
nsProgressFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsProgressFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mBarDiv, "Progress bar div must exist!");
NS_ASSERTION(!GetPrevContinuation(),
"nsProgressFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first.");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
nsIFrame* barFrame = mBarDiv->GetPrimaryFrame();
NS_ASSERTION(barFrame, "The progress frame should have a child with a frame!");
ReflowBarFrame(barFrame, aPresContext, aReflowInput, aStatus);
aDesiredSize.SetSize(aReflowInput.GetWritingMode(),
aReflowInput.ComputedSizeWithBorderPadding());
aDesiredSize.SetOverflowAreasToDesiredBounds();
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, barFrame);
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsSVGForeignObjectFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(!(GetStateBits() & NS_FRAME_IS_NONDISPLAY),
"Should not have been called");
// Only InvalidateAndScheduleBoundsUpdate marks us with NS_FRAME_IS_DIRTY,
// so if that bit is still set we still have a resize pending. If we hit
// this assertion, then we should get the presShell to skip reflow roots
// that have a dirty parent since a reflow is going to come via the
// reflow root's parent anyway.
NS_ASSERTION(!(GetStateBits() & NS_FRAME_IS_DIRTY),
"Reflowing while a resize is pending is wasteful");
// ReflowSVG makes sure mRect is up to date before we're called.
NS_ASSERTION(!aReflowInput.mParentReflowInput,
"should only get reflow from being reflow root");
NS_ASSERTION(aReflowInput.ComputedWidth() == GetSize().width &&
aReflowInput.ComputedHeight() == GetSize().height,
"reflow roots should be reflowed at existing size and "
"svg.css should ensure we have no padding/border/margin");
DoReflow();
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm, aReflowInput.ComputedISize(),
aReflowInput.ComputedBSize());
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
aStatus = NS_FRAME_COMPLETE;
}
void
nsTableWrapperFrame::UpdateOverflowAreas(ReflowOutput& aMet)
{
aMet.SetOverflowAreasToDesiredBounds();
ConsiderChildOverflow(aMet.mOverflowAreas, InnerTableFrame());
if (mCaptionFrames.NotEmpty()) {
ConsiderChildOverflow(aMet.mOverflowAreas, mCaptionFrames.FirstChild());
}
}
void
nsTextControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTextControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// make sure that the form registers itself on the initial/first reflow
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
// set values of reflow's out parameters
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize
finalSize(wm,
aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm),
aReflowInput.ComputedBSize() +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(wm));
aDesiredSize.SetSize(wm, finalSize);
// computation of the ascent wrt the input height
nscoord lineHeight = aReflowInput.ComputedBSize();
float inflation = nsLayoutUtils::FontSizeInflationFor(this);
if (!IsSingleLineTextControl()) {
lineHeight = ReflowInput::CalcLineHeight(GetContent(), StyleContext(),
NS_AUTOHEIGHT, inflation);
}
RefPtr<nsFontMetrics> fontMet =
nsLayoutUtils::GetFontMetricsForFrame(this, inflation);
// now adjust for our borders and padding
aDesiredSize.SetBlockStartAscent(
nsLayoutUtils::GetCenteredFontBaseline(fontMet, lineHeight,
wm.IsLineInverted()) +
aReflowInput.ComputedLogicalBorderPadding().BStart(wm));
// overflow handling
aDesiredSize.SetOverflowAreasToDesiredBounds();
// perform reflow on all kids
nsIFrame* kid = mFrames.FirstChild();
while (kid) {
ReflowTextControlChild(kid, aPresContext, aReflowInput, aStatus, aDesiredSize);
kid = kid->GetNextSibling();
}
// take into account css properties that affect overflow handling
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/* virtual */ void
nsRubyTextFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
// Even if we want to hide this frame, we have to reflow it first.
// If we leave it dirty, changes to its content will never be
// propagated to the ancestors, then it won't be displayed even if
// the content is no longer the same, until next reflow triggered by
// some other change. In general, we always reflow all the frames we
// created. There might be other problems if we don't do that.
nsRubyContentFrame::Reflow(aPresContext, aDesiredSize, aReflowInput, aStatus);
if (IsAutoHidden()) {
// Reset the ISize. The BSize is not changed so that it won't
// affect vertical positioning in unexpected way.
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
aDesiredSize.ISize(lineWM) = 0;
aDesiredSize.SetOverflowAreasToDesiredBounds();
}
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
aMetrics.Width() = aReflowInput.ComputedWidth();
aMetrics.Height() = aReflowInput.ComputedHeight();
// stash this away so we can compute our inner area later
mBorderPadding = aReflowInput.ComputedPhysicalBorderPadding();
aMetrics.Width() += mBorderPadding.left + mBorderPadding.right;
aMetrics.Height() += mBorderPadding.top + mBorderPadding.bottom;
// Reflow the child frames. We may have up to two, an image frame
// which is the poster, and a box frame, which is the video controls.
for (nsIFrame* child : mFrames) {
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(mBorderPadding.left, mBorderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsSize size = child->GetSize();
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(mBorderPadding.left,
mBorderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
if (child->GetSize() != size) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
} else if (child->GetContent() == mCaptionDiv) {
// Reflow to caption div
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize,
&cbSize);
nsSize size(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight());
size.width -= kidReflowInput.ComputedPhysicalBorderPadding().LeftRight();
size.height -= kidReflowInput.ComputedPhysicalBorderPadding().TopBottom();
kidReflowInput.SetComputedWidth(std::max(size.width, 0));
kidReflowInput.SetComputedHeight(std::max(size.height, 0));
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
mBorderPadding.left, mBorderPadding.top, 0, aStatus);
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
mBorderPadding.left, mBorderPadding.top, 0);
}
}
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
ViewportFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("ViewportFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE_REFLOW_IN("ViewportFrame::Reflow");
// Initialize OUT parameters
aStatus = NS_FRAME_COMPLETE;
// Because |Reflow| sets ComputedBSize() on the child to our
// ComputedBSize().
AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
// Set our size up front, since some parts of reflow depend on it
// being already set. Note that the computed height may be
// unconstrained; that's ok. Consumers should watch out for that.
SetSize(nsSize(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight()));
// Reflow the main content first so that the placeholders of the
// fixed-position frames will be in the right places on an initial
// reflow.
nscoord kidBSize = 0;
WritingMode wm = aReflowInput.GetWritingMode();
if (mFrames.NotEmpty()) {
// Deal with a non-incremental reflow or an incremental reflow
// targeted at our one-and-only principal child frame.
if (aReflowInput.ShouldReflowAllKids() ||
aReflowInput.IsBResize() ||
NS_SUBTREE_DIRTY(mFrames.FirstChild())) {
// Reflow our one-and-only principal child frame
nsIFrame* kidFrame = mFrames.FirstChild();
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = kidFrame->GetWritingMode();
LogicalSize availableSpace = aReflowInput.AvailableSize(wm);
ReflowInput kidReflowInput(aPresContext, aReflowInput,
kidFrame, availableSpace);
// Reflow the frame
kidReflowInput.SetComputedBSize(aReflowInput.ComputedBSize());
ReflowChild(kidFrame, aPresContext, kidDesiredSize, kidReflowInput,
0, 0, 0, aStatus);
kidBSize = kidDesiredSize.BSize(wm);
FinishReflowChild(kidFrame, aPresContext, kidDesiredSize, nullptr, 0, 0, 0);
} else {
kidBSize = LogicalSize(wm, mFrames.FirstChild()->GetSize()).BSize(wm);
}
}
NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
"shouldn't happen anymore");
// Return the max size as our desired size
LogicalSize maxSize(wm, aReflowInput.AvailableISize(),
// Being flowed initially at an unconstrained block size
// means we should return our child's intrinsic size.
aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE
? aReflowInput.ComputedBSize()
: kidBSize);
aDesiredSize.SetSize(wm, maxSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (HasAbsolutelyPositionedChildren()) {
// Make a copy of the reflow state and change the computed width and height
// to reflect the available space for the fixed items
ReflowInput reflowInput(aReflowInput);
if (reflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
// We have an intrinsic-height document with abs-pos/fixed-pos children.
// Set the available height and mComputedHeight to our chosen height.
reflowInput.AvailableBSize() = maxSize.BSize(wm);
// Not having border/padding simplifies things
NS_ASSERTION(reflowInput.ComputedPhysicalBorderPadding() == nsMargin(0,0,0,0),
"Viewports can't have border/padding");
reflowInput.SetComputedBSize(maxSize.BSize(wm));
}
nsRect rect = AdjustReflowInputAsContainingBlock(&reflowInput);
nsOverflowAreas* overflowAreas = &aDesiredSize.mOverflowAreas;
nsIScrollableFrame* rootScrollFrame =
aPresContext->PresShell()->GetRootScrollFrameAsScrollable();
if (rootScrollFrame && !rootScrollFrame->IsIgnoringViewportClipping()) {
overflowAreas = nullptr;
}
AbsPosReflowFlags flags =
AbsPosReflowFlags::eCBWidthAndHeightChanged; // XXX could be optimized
GetAbsoluteContainingBlock()->Reflow(this, aPresContext, reflowInput, aStatus,
rect, flags, overflowAreas);
}
if (mFrames.NotEmpty()) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, mFrames.FirstChild());
}
// If we were dirty then do a repaint
if (GetStateBits() & NS_FRAME_IS_DIRTY) {
InvalidateFrame();
}
// Clipping is handled by the document container (e.g., nsSubDocumentFrame),
// so we don't need to change our overflow areas.
bool overflowChanged = FinishAndStoreOverflow(&aDesiredSize);
if (overflowChanged) {
// We may need to alert our container to get it to pick up the
// overflow change.
nsSubDocumentFrame* container = static_cast<nsSubDocumentFrame*>
(nsLayoutUtils::GetCrossDocParentFrame(this));
if (container && !container->ShouldClipSubdocument()) {
container->PresContext()->PresShell()->
FrameNeedsReflow(container, nsIPresShell::eResize, NS_FRAME_IS_DIRTY);
}
}
NS_FRAME_TRACE_REFLOW_OUT("ViewportFrame::Reflow", aStatus);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/*
* Note: we largely position/size out our children (page frames) using
* \*physical\* x/y/width/height values, because the print preview UI is always
* arranged in the same orientation, regardless of writing mode.
*/
void
nsSimplePageSequenceFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
NS_PRECONDITION(aPresContext->IsRootPaginatedDocument(),
"A Page Sequence is only for real pages");
DO_GLOBAL_REFLOW_COUNT("nsSimplePageSequenceFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!");
NS_FRAME_TRACE_REFLOW_IN("nsSimplePageSequenceFrame::Reflow");
// Don't do incremental reflow until we've taught tables how to do
// it right in paginated mode.
if (!(GetStateBits() & NS_FRAME_FIRST_REFLOW)) {
// Return our desired size
SetDesiredSize(aDesiredSize, aReflowInput, mSize.width, mSize.height);
aDesiredSize.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aDesiredSize);
if (GetRect().Width() != aDesiredSize.Width()) {
// Our width is changing; we need to re-center our children (our pages).
for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
nsIFrame* child = e.get();
nsMargin pageCSSMargin = child->GetUsedMargin();
nscoord centeringMargin =
ComputeCenteringMargin(aReflowInput.ComputedWidth(),
child->GetRect().Width(),
pageCSSMargin);
nscoord newX = pageCSSMargin.left + centeringMargin;
// Adjust the child's x-position:
child->MovePositionBy(nsPoint(newX - child->GetNormalPosition().x, 0));
}
}
return;
}
// See if we can get a Print Settings from the Context
if (!mPageData->mPrintSettings &&
aPresContext->Medium() == nsGkAtoms::print) {
mPageData->mPrintSettings = aPresContext->GetPrintSettings();
}
// now get out margins & edges
if (mPageData->mPrintSettings) {
nsIntMargin unwriteableTwips;
mPageData->mPrintSettings->GetUnwriteableMarginInTwips(unwriteableTwips);
NS_ASSERTION(unwriteableTwips.left >= 0 && unwriteableTwips.top >= 0 &&
unwriteableTwips.right >= 0 && unwriteableTwips.bottom >= 0,
"Unwriteable twips should be non-negative");
nsIntMargin marginTwips;
mPageData->mPrintSettings->GetMarginInTwips(marginTwips);
mMargin = aPresContext->CSSTwipsToAppUnits(marginTwips + unwriteableTwips);
int16_t printType;
mPageData->mPrintSettings->GetPrintRange(&printType);
mPrintRangeType = printType;
nsIntMargin edgeTwips;
mPageData->mPrintSettings->GetEdgeInTwips(edgeTwips);
// sanity check the values. three inches are sometimes needed
int32_t inchInTwips = NS_INCHES_TO_INT_TWIPS(3.0);
edgeTwips.top = clamped(edgeTwips.top, 0, inchInTwips);
edgeTwips.bottom = clamped(edgeTwips.bottom, 0, inchInTwips);
edgeTwips.left = clamped(edgeTwips.left, 0, inchInTwips);
edgeTwips.right = clamped(edgeTwips.right, 0, inchInTwips);
mPageData->mEdgePaperMargin =
aPresContext->CSSTwipsToAppUnits(edgeTwips + unwriteableTwips);
}
// *** Special Override ***
// If this is a sub-sdoc (meaning it doesn't take the whole page)
// and if this Document is in the upper left hand corner
// we need to suppress the top margin or it will reflow too small
nsSize pageSize = aPresContext->GetPageSize();
mPageData->mReflowSize = pageSize;
mPageData->mReflowMargin = mMargin;
// We use the CSS "margin" property on the -moz-page pseudoelement
// to determine the space between each page in print preview.
// Keep a running y-offset for each page.
nscoord y = 0;
nscoord maxXMost = 0;
// Tile the pages vertically
ReflowOutput kidSize(aReflowInput);
for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
nsIFrame* kidFrame = e.get();
// Set the shared data into the page frame before reflow
nsPageFrame * pf = static_cast<nsPageFrame*>(kidFrame);
pf->SetSharedPageData(mPageData);
// Reflow the page
ReflowInput kidReflowInput(aPresContext, aReflowInput, kidFrame,
LogicalSize(kidFrame->GetWritingMode(),
pageSize));
nsReflowStatus status;
kidReflowInput.SetComputedISize(kidReflowInput.AvailableISize());
//kidReflowInput.SetComputedHeight(kidReflowInput.AvailableHeight());
PR_PL(("AV ISize: %d BSize: %d\n",
kidReflowInput.AvailableISize(),
kidReflowInput.AvailableBSize()));
nsMargin pageCSSMargin = kidReflowInput.ComputedPhysicalMargin();
y += pageCSSMargin.top;
nscoord x = pageCSSMargin.left;
// Place and size the page.
ReflowChild(kidFrame, aPresContext, kidSize, kidReflowInput, x, y, 0, status);
// If the page is narrower than our width, then center it horizontally:
x += ComputeCenteringMargin(aReflowInput.ComputedWidth(),
kidSize.Width(), pageCSSMargin);
FinishReflowChild(kidFrame, aPresContext, kidSize, nullptr, x, y, 0);
y += kidSize.Height();
y += pageCSSMargin.bottom;
maxXMost = std::max(maxXMost, x + kidSize.Width() + pageCSSMargin.right);
// Is the page complete?
nsIFrame* kidNextInFlow = kidFrame->GetNextInFlow();
if (status.IsFullyComplete()) {
NS_ASSERTION(!kidNextInFlow, "bad child flow list");
} else if (!kidNextInFlow) {
// The page isn't complete and it doesn't have a next-in-flow, so
// create a continuing page.
nsIFrame* continuingPage = aPresContext->PresShell()->FrameConstructor()->
CreateContinuingFrame(aPresContext, kidFrame, this);
// Add it to our child list
mFrames.InsertFrame(nullptr, kidFrame, continuingPage);
}
}
// Get Total Page Count
// XXXdholbert technically we could calculate this in the loop above,
// instead of needing a separate walk.
int32_t pageTot = mFrames.GetLength();
// Set Page Number Info
int32_t pageNum = 1;
for (nsFrameList::Enumerator e(mFrames); !e.AtEnd(); e.Next()) {
MOZ_ASSERT(e.get()->IsPageFrame(),
"only expecting nsPageFrame children. Other children will make "
"this static_cast bogus & probably violate other assumptions");
nsPageFrame* pf = static_cast<nsPageFrame*>(e.get());
pf->SetPageNumInfo(pageNum, pageTot);
pageNum++;
}
nsAutoString formattedDateString;
PRTime now = PR_Now();
if (NS_SUCCEEDED(DateTimeFormat::FormatPRTime(kDateFormatShort,
kTimeFormatNoSeconds,
now,
formattedDateString))) {
SetDateTimeStr(formattedDateString);
}
// Return our desired size
// Adjust the reflow size by PrintPreviewScale so the scrollbars end up the
// correct size
SetDesiredSize(aDesiredSize, aReflowInput, maxXMost, y);
aDesiredSize.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aDesiredSize);
// cache the size so we can set the desired size
// for the other reflows that happen
mSize.width = maxXMost;
mSize.height = y;
NS_FRAME_TRACE_REFLOW_OUT("nsSimplePageSequeceFrame::Reflow", aStatus);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsSubDocumentFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsSubDocumentFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsSubDocumentFrame::Reflow: maxSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_ASSERTION(aReflowInput.ComputedWidth() != NS_UNCONSTRAINEDSIZE,
"Shouldn't have unconstrained stuff here "
"thanks to the rules of reflow");
NS_ASSERTION(NS_INTRINSICSIZE != aReflowInput.ComputedHeight(),
"Shouldn't have unconstrained stuff here "
"thanks to ComputeAutoSize");
aStatus = NS_FRAME_COMPLETE;
NS_ASSERTION(mContent->GetPrimaryFrame() == this,
"Shouldn't happen");
// XUL <iframe> or <browser>, or HTML <iframe>, <object> or <embed>
aDesiredSize.SetSize(aReflowInput.GetWritingMode(),
aReflowInput.ComputedSizeWithBorderPadding());
// "offset" is the offset of our content area from our frame's
// top-left corner.
nsPoint offset = nsPoint(aReflowInput.ComputedPhysicalBorderPadding().left,
aReflowInput.ComputedPhysicalBorderPadding().top);
if (mInnerView) {
const nsMargin& bp = aReflowInput.ComputedPhysicalBorderPadding();
nsSize innerSize(aDesiredSize.Width() - bp.LeftRight(),
aDesiredSize.Height() - bp.TopBottom());
// Size & position the view according to 'object-fit' & 'object-position'.
nsIFrame* subDocRoot = ObtainIntrinsicSizeFrame();
IntrinsicSize intrinsSize;
nsSize intrinsRatio;
if (subDocRoot) {
intrinsSize = subDocRoot->GetIntrinsicSize();
intrinsRatio = subDocRoot->GetIntrinsicRatio();
}
nsRect destRect =
nsLayoutUtils::ComputeObjectDestRect(nsRect(offset, innerSize),
intrinsSize, intrinsRatio,
StylePosition());
nsViewManager* vm = mInnerView->GetViewManager();
vm->MoveViewTo(mInnerView, destRect.x, destRect.y);
vm->ResizeView(mInnerView, nsRect(nsPoint(0, 0), destRect.Size()), true);
}
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (!ShouldClipSubdocument()) {
nsIFrame* subdocRootFrame = GetSubdocumentRootFrame();
if (subdocRootFrame) {
aDesiredSize.mOverflowAreas.UnionWith(subdocRootFrame->GetOverflowAreas() + offset);
}
}
FinishAndStoreOverflow(&aDesiredSize);
if (!aPresContext->IsPaginated() && !mPostedReflowCallback) {
PresContext()->PresShell()->PostReflowCallback(this);
mPostedReflowCallback = true;
}
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsSubDocumentFrame::Reflow: size=%d,%d status=%x",
aDesiredSize.Width(), aDesiredSize.Height(), aStatus));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
BRFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("BRFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm);
finalSize.BSize(wm) = 0; // BR frames with block size 0 are ignored in quirks
// mode by nsLineLayout::VerticalAlignFrames .
// However, it's not always 0. See below.
finalSize.ISize(wm) = 0;
aMetrics.SetBlockStartAscent(0);
// Only when the BR is operating in a line-layout situation will it
// behave like a BR. Additionally, we suppress breaks from BR inside
// of ruby frames. To determine if we're inside ruby, we have to rely
// on the *parent's* ShouldSuppressLineBreak() method, instead of our
// own, because we may have custom "display" value that makes our
// ShouldSuppressLineBreak() return false.
nsLineLayout* ll = aReflowInput.mLineLayout;
if (ll && !GetParent()->StyleContext()->ShouldSuppressLineBreak()) {
// Note that the compatibility mode check excludes AlmostStandards
// mode, since this is the inline box model. See bug 161691.
if ( ll->LineIsEmpty() ||
aPresContext->CompatibilityMode() == eCompatibility_FullStandards ) {
// The line is logically empty; any whitespace is trimmed away.
//
// If this frame is going to terminate the line we know
// that nothing else will go on the line. Therefore, in this
// case, we provide some height for the BR frame so that it
// creates some vertical whitespace. It's necessary to use the
// line-height rather than the font size because the
// quirks-mode fix that doesn't apply the block's min
// line-height makes this necessary to make BR cause a line
// of the full line-height
// We also do this in strict mode because BR should act like a
// normal inline frame. That line-height is used is important
// here for cases where the line-height is less than 1.
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetInflatedFontMetricsForFrame(this);
if (fm) {
nscoord logicalHeight = aReflowInput.CalcLineHeight();
finalSize.BSize(wm) = logicalHeight;
aMetrics.SetBlockStartAscent(nsLayoutUtils::GetCenteredFontBaseline(
fm, logicalHeight, wm.IsLineInverted()));
}
else {
aMetrics.SetBlockStartAscent(aMetrics.BSize(wm) = 0);
}
// XXX temporary until I figure out a better solution; see the
// code in nsLineLayout::VerticalAlignFrames that zaps minY/maxY
// if the width is zero.
// XXX This also fixes bug 10036!
// Warning: nsTextControlFrame::CalculateSizeStandard depends on
// the following line, see bug 228752.
// The code below in AddInlinePrefISize also adds 1 appunit to width
finalSize.ISize(wm) = 1;
}
// Return our reflow status
uint32_t breakType = aReflowInput.mStyleDisplay->PhysicalBreakType(wm);
if (NS_STYLE_CLEAR_NONE == breakType) {
breakType = NS_STYLE_CLEAR_LINE;
}
aStatus = NS_INLINE_BREAK | NS_INLINE_BREAK_AFTER |
NS_INLINE_MAKE_BREAK_TYPE(breakType);
ll->SetLineEndsInBR(true);
}
else {
aStatus = NS_FRAME_COMPLETE;
}
aMetrics.SetSize(wm, finalSize);
aMetrics.SetOverflowAreasToDesiredBounds();
mAscent = aMetrics.BlockStartAscent();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
const WritingMode myWM = aReflowInput.GetWritingMode();
// The ISize of our content box, which is the available ISize
// for our anonymous content:
const nscoord contentBoxISize = aReflowInput.ComputedISize();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
// Figure out our border-box sizes as well (by adding borderPadding to
// content-box sizes):
const nscoord borderBoxISize = contentBoxISize +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
nscoord borderBoxBSize;
if (contentBoxBSize != NS_INTRINSICSIZE) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
} // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxBSize == NS_INTRINSICSIZE) {
contentBoxBSize = 0;
borderBoxBSize =
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
ReflowOutput wrappersDesiredSize(aReflowInput);
WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wrapperWM);
availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;
ReflowInput wrapperReflowInput(aPresContext, aReflowInput,
outerWrapperFrame, availSize);
// Convert wrapper margin into my own writing-mode (in case it differs):
LogicalMargin wrapperMargin =
wrapperReflowInput.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);
// offsets of wrapper frame within this frame:
LogicalPoint
wrapperOffset(myWM,
aReflowInput.ComputedLogicalBorderPadding().IStart(myWM) +
wrapperMargin.IStart(myWM),
aReflowInput.ComputedLogicalBorderPadding().BStart(myWM) +
wrapperMargin.BStart(myWM));
nsReflowStatus childStatus;
// We initially reflow the child with a dummy containerSize; positioning
// will be fixed later.
const nsSize dummyContainerSize;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowInput, myWM, wrapperOffset, dummyContainerSize, 0,
childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained available block-size, "
"so it should be complete");
nscoord wrappersMarginBoxBSize =
wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// block-size:
contentBoxBSize = wrappersMarginBoxBSize;
// Make sure we obey min/max-bsize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since ComputedMaxBSize and
// ComputedMinBSize are content heights.
contentBoxBSize =
NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
// Center child in block axis
nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);
// Needed in FinishReflowChild, for logical-to-physical conversion:
nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
GetPhysicalSize(myWM);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowInput, myWM, wrapperOffset,
borderBoxSize, 0);
nsSize contentBoxSize =
LogicalSize(myWM, contentBoxISize, contentBoxBSize).
GetPhysicalSize(myWM);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowInput.GetWritingMode(),
contentBoxSize));
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aDesiredSize.SetSize(myWM, logicalDesiredSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsFieldSetFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFieldSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_PRECONDITION(aReflowInput.ComputedISize() != NS_INTRINSICSIZE,
"Should have a precomputed inline-size!");
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
ocStatus);
}
//------------ Handle Incremental Reflow -----------------
bool reflowInner;
bool reflowLegend;
nsIFrame* legend = GetLegend();
nsIFrame* inner = GetInner();
if (aReflowInput.ShouldReflowAllKids()) {
reflowInner = inner != nullptr;
reflowLegend = legend != nullptr;
} else {
reflowInner = inner && NS_SUBTREE_DIRTY(inner);
reflowLegend = legend && NS_SUBTREE_DIRTY(legend);
}
// We don't allow fieldsets to break vertically. If we did, we'd
// need logic here to push and pull overflow frames.
// Since we're not applying our padding in this frame, we need to add it here
// to compute the available width for our children.
WritingMode wm = GetWritingMode();
WritingMode innerWM = inner ? inner->GetWritingMode() : wm;
WritingMode legendWM = legend ? legend->GetWritingMode() : wm;
LogicalSize innerAvailSize = aReflowInput.ComputedSizeWithPadding(innerWM);
LogicalSize legendAvailSize = aReflowInput.ComputedSizeWithPadding(legendWM);
innerAvailSize.BSize(innerWM) = legendAvailSize.BSize(legendWM) =
NS_UNCONSTRAINEDSIZE;
NS_ASSERTION(!inner ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
inner,
nsLayoutUtils::MIN_ISIZE) <=
innerAvailSize.ISize(innerWM),
"Bogus availSize.ISize; should be bigger");
NS_ASSERTION(!legend ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
legend,
nsLayoutUtils::MIN_ISIZE) <=
legendAvailSize.ISize(legendWM),
"Bogus availSize.ISize; should be bigger");
// get our border and padding
LogicalMargin border = aReflowInput.ComputedLogicalBorderPadding() -
aReflowInput.ComputedLogicalPadding();
// Figure out how big the legend is if there is one.
// get the legend's margin
LogicalMargin legendMargin(wm);
// reflow the legend only if needed
Maybe<ReflowInput> legendReflowInput;
if (legend) {
legendReflowInput.emplace(aPresContext, aReflowInput, legend,
legendAvailSize);
}
if (reflowLegend) {
ReflowOutput legendDesiredSize(aReflowInput);
// We'll move the legend to its proper place later, so the position
// and containerSize passed here are unimportant.
const nsSize dummyContainerSize;
ReflowChild(legend, aPresContext, legendDesiredSize, *legendReflowInput,
wm, LogicalPoint(wm), dummyContainerSize,
NS_FRAME_NO_MOVE_FRAME, aStatus);
#ifdef NOISY_REFLOW
printf(" returned (%d, %d)\n",
legendDesiredSize.Width(), legendDesiredSize.Height());
#endif
// figure out the legend's rectangle
legendMargin = legend->GetLogicalUsedMargin(wm);
mLegendRect =
LogicalRect(wm, 0, 0,
legendDesiredSize.ISize(wm) + legendMargin.IStartEnd(wm),
legendDesiredSize.BSize(wm) + legendMargin.BStartEnd(wm));
nscoord oldSpace = mLegendSpace;
mLegendSpace = 0;
if (mLegendRect.BSize(wm) > border.BStart(wm)) {
// center the border on the legend
mLegendSpace = mLegendRect.BSize(wm) - border.BStart(wm);
} else {
mLegendRect.BStart(wm) =
(border.BStart(wm) - mLegendRect.BSize(wm)) / 2;
}
// if the legend space changes then we need to reflow the
// content area as well.
if (mLegendSpace != oldSpace && inner) {
reflowInner = true;
}
FinishReflowChild(legend, aPresContext, legendDesiredSize,
legendReflowInput.ptr(), wm, LogicalPoint(wm),
dummyContainerSize, NS_FRAME_NO_MOVE_FRAME);
} else if (!legend) {
mLegendRect.SetEmpty();
mLegendSpace = 0;
} else {
// mLegendSpace and mLegendRect haven't changed, but we need
// the used margin when placing the legend.
legendMargin = legend->GetLogicalUsedMargin(wm);
}
// This containerSize is incomplete as yet: it does not include the size
// of the |inner| frame itself.
nsSize containerSize = (LogicalSize(wm, 0, mLegendSpace) +
border.Size(wm)).GetPhysicalSize(wm);
// reflow the content frame only if needed
if (reflowInner) {
ReflowInput kidReflowInput(aPresContext, aReflowInput, inner,
innerAvailSize, nullptr,
ReflowInput::CALLER_WILL_INIT);
// Override computed padding, in case it's percentage padding
kidReflowInput.Init(aPresContext, nullptr, nullptr,
&aReflowInput.ComputedPhysicalPadding());
// Our child is "height:100%" but we actually want its height to be reduced
// by the amount of content-height the legend is eating up, unless our
// height is unconstrained (in which case the child's will be too).
if (aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.SetComputedBSize(
std::max(0, aReflowInput.ComputedBSize() - mLegendSpace));
}
if (aReflowInput.ComputedMinBSize() > 0) {
kidReflowInput.ComputedMinBSize() =
std::max(0, aReflowInput.ComputedMinBSize() - mLegendSpace);
}
if (aReflowInput.ComputedMaxBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.ComputedMaxBSize() =
std::max(0, aReflowInput.ComputedMaxBSize() - mLegendSpace);
}
ReflowOutput kidDesiredSize(kidReflowInput,
aDesiredSize.mFlags);
// Reflow the frame
NS_ASSERTION(kidReflowInput.ComputedPhysicalMargin() == nsMargin(0,0,0,0),
"Margins on anonymous fieldset child not supported!");
LogicalPoint pt(wm, border.IStart(wm), border.BStart(wm) + mLegendSpace);
// We don't know the correct containerSize until we have reflowed |inner|,
// so we use a dummy value for now; FinishReflowChild will fix the position
// if necessary.
const nsSize dummyContainerSize;
ReflowChild(inner, aPresContext, kidDesiredSize, kidReflowInput,
wm, pt, dummyContainerSize, 0, aStatus);
// Update containerSize to account for size of the inner frame, so that
// FinishReflowChild can position it correctly.
containerSize += kidDesiredSize.PhysicalSize();
FinishReflowChild(inner, aPresContext, kidDesiredSize,
&kidReflowInput, wm, pt, containerSize, 0);
NS_FRAME_TRACE_REFLOW_OUT("FieldSet::Reflow", aStatus);
} else if (inner) {
// |inner| didn't need to be reflowed but we do need to include its size
// in containerSize.
containerSize += inner->GetSize();
}
LogicalRect contentRect(wm);
if (inner) {
// We don't support margins on inner, so our content rect is just the
// inner's border-box. (We don't really care about container size at this
// point, as we'll figure out the actual positioning later.)
contentRect = inner->GetLogicalRect(wm, containerSize);
}
// Our content rect must fill up the available width
LogicalSize availSize = aReflowInput.ComputedSizeWithPadding(wm);
if (availSize.ISize(wm) > contentRect.ISize(wm)) {
contentRect.ISize(wm) = innerAvailSize.ISize(wm);
}
if (legend) {
// The legend is positioned inline-wards within the inner's content rect
// (so that padding on the fieldset affects the legend position).
LogicalRect innerContentRect = contentRect;
innerContentRect.Deflate(wm, aReflowInput.ComputedLogicalPadding());
// If the inner content rect is larger than the legend, we can align the
// legend.
if (innerContentRect.ISize(wm) > mLegendRect.ISize(wm)) {
// NOTE legend @align values are: left/right/center/top/bottom.
// GetLogicalAlign converts left/right to start/end for the given WM.
// @see HTMLLegendElement::ParseAttribute, nsLegendFrame::GetLogicalAlign
int32_t align = static_cast<nsLegendFrame*>
(legend->GetContentInsertionFrame())->GetLogicalAlign(wm);
switch (align) {
case NS_STYLE_TEXT_ALIGN_END:
mLegendRect.IStart(wm) =
innerContentRect.IEnd(wm) - mLegendRect.ISize(wm);
break;
case NS_STYLE_TEXT_ALIGN_CENTER:
// Note: rounding removed; there doesn't seem to be any need
mLegendRect.IStart(wm) = innerContentRect.IStart(wm) +
(innerContentRect.ISize(wm) - mLegendRect.ISize(wm)) / 2;
break;
case NS_STYLE_TEXT_ALIGN_START:
case NS_STYLE_VERTICAL_ALIGN_TOP:
case NS_STYLE_VERTICAL_ALIGN_BOTTOM:
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
break;
default:
MOZ_ASSERT_UNREACHABLE("unexpected GetLogicalAlign value");
}
} else {
// otherwise make place for the legend
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
innerContentRect.ISize(wm) = mLegendRect.ISize(wm);
contentRect.ISize(wm) = mLegendRect.ISize(wm) +
aReflowInput.ComputedLogicalPadding().IStartEnd(wm);
}
// place the legend
LogicalRect actualLegendRect = mLegendRect;
actualLegendRect.Deflate(wm, legendMargin);
LogicalPoint actualLegendPos(actualLegendRect.Origin(wm));
// Note that legend's writing mode may be different from the fieldset's,
// so we need to convert offsets before applying them to it (bug 1134534).
LogicalMargin offsets =
legendReflowInput->ComputedLogicalOffsets().
ConvertTo(wm, legendReflowInput->GetWritingMode());
ReflowInput::ApplyRelativePositioning(legend, wm, offsets,
&actualLegendPos,
containerSize);
legend->SetPosition(wm, actualLegendPos, containerSize);
nsContainerFrame::PositionFrameView(legend);
nsContainerFrame::PositionChildViews(legend);
}
// Return our size and our result.
LogicalSize finalSize(wm, contentRect.ISize(wm) + border.IStartEnd(wm),
mLegendSpace + border.BStartEnd(wm) +
(inner ? inner->BSize(wm) : 0));
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (legend) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, legend);
}
if (inner) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, inner);
}
// Merge overflow container bounds and status.
aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
NS_MergeReflowStatusInto(&aStatus, ocStatus);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus);
InvalidateFrame();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsSVGOuterSVGFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsSVGOuterSVGFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsSVGOuterSVGFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
aDesiredSize.Width() = aReflowInput.ComputedWidth() +
aReflowInput.ComputedPhysicalBorderPadding().LeftRight();
aDesiredSize.Height() = aReflowInput.ComputedHeight() +
aReflowInput.ComputedPhysicalBorderPadding().TopBottom();
NS_ASSERTION(!GetPrevInFlow(), "SVG can't currently be broken across pages.");
SVGSVGElement *svgElem = static_cast<SVGSVGElement*>(mContent);
nsSVGOuterSVGAnonChildFrame *anonKid =
static_cast<nsSVGOuterSVGAnonChildFrame*>(PrincipalChildList().FirstChild());
if (mState & NS_FRAME_FIRST_REFLOW) {
// Initialize
svgElem->UpdateHasChildrenOnlyTransform();
}
// If our SVG viewport has changed, update our content and notify.
// http://www.w3.org/TR/SVG11/coords.html#ViewportSpace
svgFloatSize newViewportSize(
nsPresContext::AppUnitsToFloatCSSPixels(aReflowInput.ComputedWidth()),
nsPresContext::AppUnitsToFloatCSSPixels(aReflowInput.ComputedHeight()));
svgFloatSize oldViewportSize = svgElem->GetViewportSize();
uint32_t changeBits = 0;
if (newViewportSize != oldViewportSize) {
// When our viewport size changes, we may need to update the overflow rects
// of our child frames. This is the case if:
//
// * We have a real/synthetic viewBox (a children-only transform), since
// the viewBox transform will change as the viewport dimensions change.
//
// * We do not have a real/synthetic viewBox, but the last time we
// reflowed (or the last time UpdateOverflow() was called) we did.
//
// We only handle the former case here, in which case we mark all our child
// frames as dirty so that we reflow them below and update their overflow
// rects.
//
// In the latter case, updating of overflow rects is handled for removal of
// real viewBox (the viewBox attribute) in AttributeChanged. Synthetic
// viewBox "removal" (e.g. a document references the same SVG via both an
// <svg:image> and then as a CSS background image (a synthetic viewBox is
// used when painting the former, but not when painting the latter)) is
// handled in SVGSVGElement::FlushImageTransformInvalidation.
//
if (svgElem->HasViewBoxOrSyntheticViewBox()) {
nsIFrame* anonChild = PrincipalChildList().FirstChild();
anonChild->AddStateBits(NS_FRAME_IS_DIRTY);
for (nsIFrame* child : anonChild->PrincipalChildList()) {
child->AddStateBits(NS_FRAME_IS_DIRTY);
}
}
changeBits |= COORD_CONTEXT_CHANGED;
svgElem->SetViewportSize(newViewportSize);
}
if (mFullZoom != PresContext()->GetFullZoom()) {
changeBits |= FULL_ZOOM_CHANGED;
mFullZoom = PresContext()->GetFullZoom();
}
if (changeBits) {
NotifyViewportOrTransformChanged(changeBits);
}
mViewportInitialized = true;
// Now that we've marked the necessary children as dirty, call
// ReflowSVG() or ReflowSVGNonDisplayText() on them, depending
// on whether we are non-display.
mCallingReflowSVG = true;
if (GetStateBits() & NS_FRAME_IS_NONDISPLAY) {
ReflowSVGNonDisplayText(this);
} else {
// Update the mRects and visual overflow rects of all our descendants,
// including our anonymous wrapper kid:
anonKid->AddStateBits(mState & NS_FRAME_IS_DIRTY);
anonKid->ReflowSVG();
MOZ_ASSERT(!anonKid->GetNextSibling(),
"We should have one anonymous child frame wrapping our real "
"children");
}
mCallingReflowSVG = false;
// Set our anonymous kid's offset from our border box:
anonKid->SetPosition(GetContentRectRelativeToSelf().TopLeft());
// Including our size in our overflow rects regardless of the value of
// 'background', 'border', etc. makes sure that we usually (when we clip to
// our content area) don't have to keep changing our overflow rects as our
// descendants move about (see perf comment below). Including our size in our
// scrollable overflow rect also makes sure that we scroll if we're too big
// for our viewport.
//
// <svg> never allows scrolling to anything outside its mRect (only panning),
// so we must always keep our scrollable overflow set to our size.
//
// With regards to visual overflow, we always clip root-<svg> (see our
// BuildDisplayList method) regardless of the value of the 'overflow'
// property since that is per-spec, even for the initial 'visible' value. For
// that reason there's no point in adding descendant visual overflow to our
// own when this frame is for a root-<svg>. That said, there's also a very
// good performance reason for us wanting to avoid doing so. If we did, then
// the frame's overflow would often change as descendants that are partially
// or fully outside its rect moved (think animation on/off screen), and that
// would cause us to do a full NS_FRAME_IS_DIRTY reflow and repaint of the
// entire document tree each such move (see bug 875175).
//
// So it's only non-root outer-<svg> that has the visual overflow of its
// descendants added to its own. (Note that the default user-agent style
// sheet makes 'hidden' the default value for :not(root(svg)), so usually
// FinishAndStoreOverflow will still clip this back to the frame's rect.)
//
// WARNING!! Keep UpdateBounds below in sync with whatever we do for our
// overflow rects here! (Again, see bug 875175.)
//
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (!mIsRootContent) {
aDesiredSize.mOverflowAreas.VisualOverflow().UnionRect(
aDesiredSize.mOverflowAreas.VisualOverflow(),
anonKid->GetVisualOverflowRect() + anonKid->GetPosition());
}
FinishAndStoreOverflow(&aDesiredSize);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsSVGOuterSVGFrame::Reflow: size=%d,%d",
aDesiredSize.Width(), aDesiredSize.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
const WritingMode myWM = aReflowInput.GetWritingMode();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
const nscoord borderBoxISize = aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);
nscoord borderBoxBSize;
if (!isBSizeShrinkWrapping) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();
// Reflow the child frames. We may have up to three: an image
// frame (for the poster image), a container frame for the controls,
// and a container frame for the caption.
for (nsIFrame* child : mFrames) {
nsSize oldChildSize = child->GetSize();
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(borderPadding.left, borderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(borderPadding.left,
borderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
#endif // ANDROID
} else if (child->GetContent() == mCaptionDiv ||
child->GetContent() == mVideoControls) {
// Reflow the caption and control bar frames.
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.ComputedSize(wm);
availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize);
ReflowOutput kidDesiredSize(kidReflowInput);
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
borderPadding.left, borderPadding.top, 0, aStatus);
if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
// Resolve our own BSize based on the controls' size in the same axis.
contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
}
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
borderPadding.left, borderPadding.top, 0);
}
if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
}
if (isBSizeShrinkWrapping) {
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We didn't get a BSize from our intrinsic size/ratio, nor did we
// get one from our controls. Just use BSize of 0.
contentBoxBSize = 0;
}
contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aMetrics.SetSize(myWM, logicalDesiredSize);
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
ReflowOutput& aButtonDesiredSize,
const ReflowInput& aButtonReflowInput,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// See whether out availSize's inline-size is big enough. If it's
// smaller than our intrinsic min iSize, that means that the kid
// wouldn't really fit. In that case, we overflow into our internal
// focuspadding (which other browsers don't have) so that there's a
// little more space for it.
// Note that GetMinISize includes the focusPadding.
nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
aButtonReflowInput.ComputedISize();
nscoord IFocusPadding = focusPadding.IStartEnd(wm);
nscoord focusPaddingReduction = std::min(IFocusPadding,
std::max(IOverflow, 0));
if (focusPaddingReduction > 0) {
nscoord startReduction = focusPadding.IStart(wm);
if (focusPaddingReduction != IFocusPadding) {
startReduction = NSToCoordRound(startReduction *
(float(focusPaddingReduction) /
float(IFocusPadding)));
}
focusPadding.IStart(wm) -= startReduction;
focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
}
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
LogicalPoint childPos(wm);
childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
ReflowInput adjustedButtonReflowInput =
CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);
ReflowInput contentsReflowInput(aPresContext,
adjustedButtonReflowInput,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
ReflowOutput contentsDesiredSize(aButtonReflowInput);
childPos.B(wm) = 0; // This will be set properly later, after reflowing the
// child to determine its size.
// We just pass a dummy containerSize here, as the child will be
// repositioned later by FinishReflowChild.
nsSize dummyContainerSize;
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowInput,
wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box size:
LogicalSize buttonContentBox(wm);
if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBox.BSize(wm) =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBox.BSize(wm) =
NS_CSS_MINMAX(buttonContentBox.BSize(wm),
aButtonReflowInput.ComputedMinBSize(),
aButtonReflowInput.ComputedMaxBSize());
}
if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
} else {
buttonContentBox.ISize(wm) =
contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
buttonContentBox.ISize(wm) =
NS_CSS_MINMAX(buttonContentBox.ISize(wm),
aButtonReflowInput.ComputedMinISize(),
aButtonReflowInput.ComputedMaxISize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
childPos.B(wm) = std::max(0, extraSpace / 2);
// Adjust childPos.B() to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);
nsSize containerSize =
(buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowInput,
wm, childPos, containerSize, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
ReflowOutput::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowInput.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
childPos.B(wm));
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}