void testExportAsSinglePage()
{
// Same testcase as testVerticalScaling, for now
fillModel(1, 40);
Report report;
report.setReportMode(Report::SpreadSheet);
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(1, 2); // must cram 40 rows into 2 page vertically
QFont font = QFont(QLatin1String(s_fontName));
font.setPointSize(86); // huge :)
report.setDefaultFont(font);
//QCOMPARE(report.numberOfPages(), 2);
//report.exportToFile( "testExportAsSinglePage.pdf" ); // for debugging
QTemporaryFile tempFile;
QVERIFY(tempFile.open());
const QString filename = tempFile.fileName();
tempFile.close();
const QSize size(1000, 2000);
bool ok = report.exportToImage( size, filename, "PNG" );
QVERIFY(ok);
QVERIFY(QFile::exists(filename));
QPixmap pix;
QVERIFY(pix.load(filename));
QCOMPARE(pix.size(), size);
QCOMPARE(report.mainTable()->pageRects()[0], QRect(0,0,1,40));
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() > 0.9999);
// The only way to truly validate that it worked, though, is to open test-export.jpg and check...
QFile::remove(filename);
}
void test4000SmallCells()
{
fillModel(40, 100, true /*small cells*/);
Report report;
report.setReportMode(Report::SpreadSheet);
AutoTableElement tableElement(&m_model);
tableElement.setVerticalHeaderVisible(false);
tableElement.setPadding(3);
report.mainTable()->setAutoTableElement(tableElement);
QFont font(QLatin1String("Arial"));
font.setPixelSize(19);
report.setDefaultFont(font);
report.scaleTo(2, 50);
report.mainTable()->setTableBreakingPageOrder(Report::RightThenDown);
QCOMPARE(report.numberOfPages(), 6);
// With point size 10, initially I was getting 0.583037. With FontScaler: 0.524504.
// With pixel sizes: 0.478, on both machines.
// Autobuild on linux gets 37 rows instead of 43, though (taller font, by one pixel...)
qDebug() << report.mainTable()->lastAutoFontScalingFactor();
#ifdef Q_OS_MAC
// Bah, fonts change too much.
return;
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() >= 0.37);
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() <= 0.39);
#else
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() >= 0.45);
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() <= 0.50);
#endif
const int rows = report.mainTable()->pageRects()[0].height();
qDebug() << rows << "rows";
QVERIFY(rows >= 37);
QVERIFY(rows <= 48);
const int columns = report.mainTable()->pageRects()[0].width();
QVERIFY(columns >= 20);
QVERIFY(columns <= 21);
//qDebug() << report.mainTable()->pageRects();
QCOMPARE(report.mainTable()->pageRects()[0], QRect(0,0,columns,rows));
QCOMPARE(report.mainTable()->pageRects()[1], QRect(columns,0,40-columns,rows));
QCOMPARE(report.mainTable()->pageRects()[2], QRect(0,rows,columns,rows));
QCOMPARE(report.mainTable()->pageRects()[3], QRect(columns,rows,40-columns,rows));
QCOMPARE(report.mainTable()->pageRects()[4], QRect(0,2*rows,columns,100-2*rows));
QCOMPARE(report.mainTable()->pageRects()[5], QRect(columns,2*rows,40-columns,100-2*rows));
report.setTableBreakingPageOrder(Report::DownThenRight);
//qDebug() << report.mainTable()->pageRects();
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>()
<< QRect(0,0,columns,rows)
<< QRect(0,rows,columns,rows)
<< QRect(0,2*rows,columns,100-2*rows)
<< QRect(columns,0,40-columns,rows)
<< QRect(columns,rows,40-columns,rows)
<< QRect(columns,2*rows,40-columns,100-2*rows));
}
void testOnePageLayout()
{
SKIP_IF_FONT_NOT_FOUND
fillModel(4, 8);
Report report;
report.setReportMode(Report::SpreadSheet);
report.setDefaultFont(QFont(QLatin1String(s_fontName), 14));
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
QCOMPARE(report.numberOfPages(), 1);
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>() << QRect(0,0,4,8));
QCOMPARE(report.mainTable()->lastAutoFontScalingFactor(), 1.0);
}
void testVertAndHorizScaling()
{
fillModel(4, 20); // 20 rows
Report report;
report.setReportMode(Report::SpreadSheet);
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(2, 1); // must cram 20 rows into 1 page vertically
report.setDefaultFont(QFont(QLatin1String(s_fontName), 48));
QCOMPARE(report.numberOfPages(), 2);
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() < 0.8);
//qDebug() << report.mainTable()->pageRects();
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>() << QRect(0,0,2,20) << QRect(2,0,2,20));
}
void testScaleToHuge()
{
SKIP_IF_FONT_NOT_FOUND
fillModel(2, 2);
Report report;
report.setReportMode(Report::SpreadSheet);
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(4, 4); // that's much more than we need
// Expected result: columns are split on the 2 pages horizontally, but rows are kept together
report.setDefaultFont(QFont(QLatin1String(s_fontName), 48));
QCOMPARE(report.numberOfPages(), 2);
QCOMPARE(report.mainTable()->lastAutoFontScalingFactor(), 1.0);
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>() << QRect(0,0,1,2) << QRect(1,0,1,2));
}
void testHorizontalScaling()
{
fillModel(10, 4); // 10 columns
Report report;
report.setReportMode(Report::SpreadSheet);
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(2, 1); // must fit in two pages horizontally
report.setDefaultFont(QFont(QLatin1String(s_fontName), 48));
QCOMPARE(report.numberOfPages(), 2);
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() < 0.8);
//qDebug() << report.mainTable()->pageRects();
const int columns = report.mainTable()->pageRects()[0].width();
Q_ASSERT(columns == 5 || columns == 6); // I get 6 on linux, but 5 on Windows
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>() << QRect(0,0,columns,4) << QRect(columns,0,10-columns,4));
}
void testVerticalScaling() // when scaleTo doesn't have enough room vertically
{
fillModel(1, 40);
Report report;
report.setReportMode(Report::SpreadSheet);
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(1, 2); // must cram 40 rows into 2 page vertically
QFont font = QFont(QLatin1String(s_fontName));
font.setPointSize(86);
report.setDefaultFont(font);
QCOMPARE(report.numberOfPages(), 2);
QVERIFY(report.mainTable()->lastAutoFontScalingFactor() < 0.8);
QCOMPARE(report.mainTable()->pageRects()[0], QRect(0,0,1,20));
QCOMPARE(report.mainTable()->pageRects()[1], QRect(0,20,1,20));
}
void testVerticalHeader()
{
// Check that the font for vertical headers is taken into account
// in the layouting.
// For that, we make it huge, and we check that the report takes two pages.
fillModel(4, 20);
Report report;
report.setReportMode(Report::SpreadSheet);
report.setDefaultFont(QFont(QLatin1String(s_fontName), 8));
report.mainTable()->setVerticalHeaderFont(QFont(QLatin1String("courier"), 30));
AutoTableElement tableElement(&m_model);
tableElement.setVerticalHeaderVisible(true);
tableElement.setPadding(3);
report.mainTable()->setAutoTableElement(tableElement);
QCOMPARE(report.numberOfPages(), 2);
}
void testHorizForcedBreaking()
{
SKIP_IF_FONT_NOT_FOUND
// There would be room for a single page horizontally, but the user forced 2
fillModel(2, 10);
Report report;
report.setReportMode(Report::SpreadSheet);
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(2, 1);
report.setDefaultFont(QFont(QLatin1String(s_fontName), 48));
QCOMPARE(report.numberOfPages(), 2);
QCOMPARE(report.mainTable()->lastAutoFontScalingFactor(), 1.0);
//qDebug() << report.mainTable()->pageRects();
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>() << QRect(0,0,1,10) << QRect(1,0,1,10));
}
void testMaxVerticPages()
{
QFETCH(int, numColumns);
QFETCH(int, numRows);
QFETCH(int, maxHorizPages);
QFETCH(int, maxVerticPages);
QFETCH(int, minVerticPages);
QFETCH(int, verticalHeaderFontSize);
QFETCH(int, horizontalHeaderFontSize);
fillModel(numColumns, numRows, true /*small cells*/);
for (int i = 0; i < numRows; ++i) {
m_model.setVerticalHeaderItem(i, new QStandardItem(QString::fromLatin1("Row_%1").arg(i)));
}
Report report;
report.setReportMode(Report::SpreadSheet);
const QString fontName = QString::fromLatin1("Arial");
QFont font(fontName);
font.setPointSize(10);
report.setDefaultFont(font);
report.scaleTo(maxHorizPages, maxVerticPages);
AutoTableElement tableElement(&m_model);
tableElement.setHorizontalHeaderVisible(horizontalHeaderFontSize > 0);
tableElement.setVerticalHeaderVisible(verticalHeaderFontSize > 0);
tableElement.setPadding(3);
report.mainTable()->setAutoTableElement(tableElement);
if (horizontalHeaderFontSize > 0)
report.mainTable()->setHorizontalHeaderFont(QFont(fontName, horizontalHeaderFontSize));
if (verticalHeaderFontSize > 0) {
QFont vHeaderFont(fontName, verticalHeaderFontSize);
qDebug() << "vHeaderFont:" << vHeaderFont << QFontInfo( vHeaderFont ).family() << QFontMetricsF( vHeaderFont ).height();
report.mainTable()->setVerticalHeaderFont(vHeaderFont);
}
report.setTableBreakingPageOrder(Report::RightThenDown);
qDebug() << "numberOfPages=" << report.numberOfPages();
// If this is >, then KDReports is not respecting the scaleTo API.
QVERIFY(report.numberOfPages() <= maxHorizPages*maxVerticPages);
#ifndef Q_OS_WIN
qDebug() << maxHorizPages << "*" << minVerticPages << "=" << maxHorizPages*minVerticPages;
// If the DPI is known, we can even check that we're not down-scaling too much.
QVERIFY(report.numberOfPages() >= maxHorizPages*minVerticPages);
#else
Q_UNUSED(minVerticPages);
#endif
}
void testWithHeaders()
{
fillModel(4, 20);
Report report;
report.setReportMode(Report::SpreadSheet);
report.setDefaultFont(QFont(QLatin1String(s_fontName), 8));
// A page header with a huge font
KDReports::Header& header = report.header( KDReports::FirstPage );
header.setDefaultFont(QFont(QLatin1String("courier"), 40));
header.addElement( KDReports::TextElement( "This is the page header.\nIt's big.\nVery\nbig.\nHuge." ) );
AutoTableElement tableElement(&m_model);
tableElement.setVerticalHeaderVisible(true);
tableElement.setPadding(3);
report.mainTable()->setAutoTableElement(tableElement);
//report.exportToFile( "testWithHeaders.pdf" ); // for debugging
#ifndef Q_OS_MAC
QCOMPARE(report.numberOfPages(), 2);
#endif
}
void testSimpleScaleTo()
{
SKIP_IF_FONT_NOT_FOUND
fillModel(4, 8);
Report report;
report.setReportMode(Report::SpreadSheet);
report.setDefaultFont(QFont(QLatin1String(s_fontName), 14));
report.mainTable()->setAutoTableElement(AutoTableElement(&m_model));
report.scaleTo(1, 4);
QCOMPARE(report.numberOfPages(), 1); // it fits
QCOMPARE(report.mainTable()->lastAutoFontScalingFactor(), 1.0);
QCOMPARE(report.mainTable()->pageRects(), QList<QRect>() << QRect(0,0,4,8));
report.scaleTo(4, 1);
QCOMPARE(report.numberOfPages(), 4); // one column per page
QCOMPARE(report.mainTable()->lastAutoFontScalingFactor(), 1.0);
QCOMPARE(report.mainTable()->pageRects()[0], QRect(0,0,1,8));
QCOMPARE(report.mainTable()->pageRects()[1], QRect(1,0,1,8));
QCOMPARE(report.mainTable()->pageRects()[2], QRect(2,0,1,8));
QCOMPARE(report.mainTable()->pageRects()[3], QRect(3,0,1,8));
}
void testFontScaling()
{
SKIP_IF_FONT_NOT_FOUND
fillModel(2, 25);
Report report;
report.setReportMode(Report::SpreadSheet);
report.setDefaultFont(QFont(QLatin1String(s_fontName), 48));
AutoTableElement tableElement(&m_model);
tableElement.setHorizontalHeaderVisible(false);
tableElement.setVerticalHeaderVisible(false);
report.mainTable()->setAutoTableElement(tableElement);
QCOMPARE(report.numberOfPages(), 2);
QCOMPARE(report.mainTable()->pageRects().count(), 2);
#ifndef Q_OS_MAC // Somehow the mac gets different font size for the headers, even compared to linux with DPI 72.
const int rowsFirstPage = report.mainTable()->pageRects()[0].height();
QVERIFY(rowsFirstPage <= 20);
QVERIFY(rowsFirstPage >= 18);
QCOMPARE(report.mainTable()->pageRects()[0], QRect(0,0,2,rowsFirstPage));
QCOMPARE(report.mainTable()->pageRects()[1], QRect(0,rowsFirstPage,2,m_model.rowCount()-rowsFirstPage));
// Now show a huge horizontal header, and check we have less rows per page
tableElement.setHorizontalHeaderVisible(true);
report.mainTable()->setAutoTableElement(tableElement);
report.mainTable()->setHorizontalHeaderFont(QFont(QLatin1String(s_fontName), 48));
QCOMPARE(report.numberOfPages(), 2);
QVERIFY(report.mainTable()->pageRects()[0].height() < rowsFirstPage);
// Now force a very small font scaling factor
report.setFontScalingFactor(0.2);
QCOMPARE(report.numberOfPages(), 1);
QCOMPARE(report.mainTable()->lastAutoFontScalingFactor(), 0.2);
QCOMPARE(report.mainTable()->pageRects()[0], QRect(0,0,2,m_model.rowCount()));
#endif
}
void testScaleTables()
{
qWarning("test temporarily disabled");
#if 0
// Note that this font is huge; each column is in fact larger than the page,
// so it wraps. Interesting testcase :)
QFont defaultFont( QLatin1String( s_fontName ), 48 );
int columns = 0;
int numOfPages = 0;
do {
// Add tables with as any columns as necessary to span 3 pages horizontally
// The API doesn't allow to keep adding cells to a single table, so we
// try this into a new report every time
// TODO: can be done with an autotable now
++columns;
Report testReport;
testReport.setReportMode(Report::SpreadSheet);
testReport.setDefaultFont( defaultFont );
testReport.setTableBreakingEnabled( true );
addTable( testReport, 1, columns );
numOfPages = testReport.numberOfPages();
} while ( numOfPages < 3 );
//qDebug() << "The table has 1 row and" << columns << "columns.";
QVERIFY( columns >= 3 );
{
Report report;
report.setDefaultFont( defaultFont );
report.setTableBreakingEnabled( true );
addTable( report, 1, columns );
QCOMPARE( report.numberOfPages(), 3 );
// Right now we're 1 | 2 | 3, let's try scaling down to 1 | 2
report.scaleTo( 2, 1 );
//report.exportToFile( "2-1.pdf" ); // for debugging
QCOMPARE( report.numberOfPages(), 2 );
report.scaleTo( 2, 10 /* doesn't matter */ );
//report.exportToFile( "2-10.pdf" ); // for debugging
QCOMPARE( report.numberOfPages(), 2 );
report.scaleTo( 3, 1 ); // back to orig
QCOMPARE( report.numberOfPages(), 3 );
report.scaleTo( 1, 1 ); // squeeze it into a single page
QCOMPARE( report.numberOfPages(), 1 );
report.scaleTo( 1, 10 ); // squeeze it into a single page
// ## how to check that all columns are visible, and not truncated?
QCOMPARE( report.numberOfPages(), 1 );
}
// Now add tables with more rows
int rows = 0;
do {
++rows;
Report testReport;
testReport.setDefaultFont( defaultFont );
testReport.setTableBreakingEnabled( true );
addTable( testReport, rows, columns );
numOfPages = testReport.numberOfPages();
} while ( numOfPages < 9 );
//qDebug() << "Making report with a big table: " << rows << "rows and" << columns << "columns.";
{
Report report;
report.setDefaultFont( defaultFont );
report.scaleTo( 3, 3 );
addTable( report, rows, columns );
//report.exportToFile( "3-3.pdf" ); // for debugging
// So now we have a table big enough for 3x3
QCOMPARE( report.numberOfPages(), 9 );
}
#endif
}