/*
* Function BuildHolesList
* Create the list of holes and tools for a given board
* The list is sorted by increasing drill values
* Only holes from aFirstLayer to aLastLayer copper layers are listed (for vias, because pad holes are always through holes)
* param aPcb : the given board
* param aHoleListBuffer : the std::vector<HOLE_INFO> to fill with pcb holes info
* param aToolListBuffer : the std::vector<DRILL_TOOL> to fill with tools to use
* param aFirstLayer = first layer to consider. if < 0 aFirstLayer is ignored (used to creates report file)
* param aLastLayer = last layer to consider. if < 0 aLastLayer is ignored
* param aExcludeThroughHoles : if true, exclude through holes ( pads and vias through )
* param aGenerateNPTH_list :
* true to create NPTH only list (with no plated holes)
* false to created plated holes list (with no NPTH )
*/
void Build_Holes_List( BOARD* aPcb,
std::vector<HOLE_INFO>& aHoleListBuffer,
std::vector<DRILL_TOOL>& aToolListBuffer,
int aFirstLayer, int aLastLayer, bool aExcludeThroughHoles,
bool aGenerateNPTH_list )
{
HOLE_INFO new_hole;
int hole_value;
aHoleListBuffer.clear();
aToolListBuffer.clear();
if( (aFirstLayer >= 0) && (aLastLayer >= 0) )
{
if( aFirstLayer > aLastLayer )
EXCHG( aFirstLayer, aLastLayer );
}
/* build hole list for vias
*/
if( ! aGenerateNPTH_list ) // vias are always plated !
{
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( track->Type() != PCB_VIA_T )
continue;
SEGVIA* via = (SEGVIA*) track;
hole_value = via->GetDrillValue();
if( hole_value == 0 )
continue;
new_hole.m_Tool_Reference = -1; // Flag value for Not initialized
new_hole.m_Hole_Orient = 0;
new_hole.m_Hole_Diameter = hole_value;
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Pos = via->m_Start;
via->ReturnLayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );
// ReturnLayerPair return params with m_Hole_Bottom_Layer < m_Hole_Top_Layer
if( (new_hole.m_Hole_Bottom_Layer > aFirstLayer) && (aFirstLayer >= 0) )
continue;
if( (new_hole.m_Hole_Top_Layer < aLastLayer) && (aLastLayer >= 0) )
continue;
if( aExcludeThroughHoles && (new_hole.m_Hole_Bottom_Layer == LAYER_N_BACK)
&& (new_hole.m_Hole_Top_Layer == LAYER_N_FRONT) )
continue;
aHoleListBuffer.push_back( new_hole );
}
}
// build hole list for pads (assumed always through holes)
if( !aExcludeThroughHoles || aGenerateNPTH_list )
{
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
// Read and analyse pads
for( D_PAD* pad = module->m_Pads; pad; pad = pad->Next() )
{
if( ! aGenerateNPTH_list && pad->GetAttribute() == PAD_HOLE_NOT_PLATED )
continue;
if( aGenerateNPTH_list && pad->GetAttribute() != PAD_HOLE_NOT_PLATED )
continue;
if( pad->GetDrillSize().x == 0 )
continue;
new_hole.m_Hole_NotPlated = (pad->GetAttribute() == PAD_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->GetOrientation();
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = std::min( pad->GetDrillSize().x, pad->GetDrillSize().y );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->GetDrillShape() != PAD_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size = pad->GetDrillSize();
new_hole.m_Hole_Pos = pad->GetPosition(); // hole position
new_hole.m_Hole_Bottom_Layer = LAYER_N_BACK;
new_hole.m_Hole_Top_Layer = LAYER_N_FRONT;// pad holes are through holes
aHoleListBuffer.push_back( new_hole );
}
}
}
// Sort holes per increasing diameter value
sort( aHoleListBuffer.begin(), aHoleListBuffer.end(), CmpHoleDiameterValue );
// build the tool list
int LastHole = -1; /* Set to not initialised (this is a value not used
* for aHoleListBuffer[ii].m_Hole_Diameter) */
DRILL_TOOL new_tool( 0 );
unsigned jj;
for( unsigned ii = 0; ii < aHoleListBuffer.size(); ii++ )
{
if( aHoleListBuffer[ii].m_Hole_Diameter != LastHole )
{
new_tool.m_Diameter = ( aHoleListBuffer[ii].m_Hole_Diameter );
aToolListBuffer.push_back( new_tool );
LastHole = new_tool.m_Diameter;
}
jj = aToolListBuffer.size();
if( jj == 0 )
continue; // Should not occurs
aHoleListBuffer[ii].m_Tool_Reference = jj; // Tool value Initialized (value >= 1)
aToolListBuffer.back().m_TotalCount++;
if( aHoleListBuffer[ii].m_Hole_Shape )
aToolListBuffer.back().m_OvalCount++;
}
}
/*
* Delete dangling tracks
* Vias:
* If a via is only connected to a dangling track, it also will be removed
*/
bool TRACKS_CLEANER::deleteUnconnectedTracks()
{
if( m_Brd->m_Track == NULL )
return false;
bool modified = false;
bool item_erased = true;
while( item_erased ) // Iterate when at least one track is deleted
{
item_erased = false;
TRACK* next_track;
for( TRACK * track = m_Brd->m_Track; track ; track = next_track )
{
next_track = track->Next();
int flag_erase = 0; //Not connected indicator
int type_end = 0;
if( track->GetState( START_ON_PAD ) )
type_end |= START_ON_PAD;
if( track->GetState( END_ON_PAD ) )
type_end |= END_ON_PAD;
// if the track start point is not connected to a pad,
// test if this track start point is connected to another track
// For via test, an enhancement could be to test if connected
// to 2 items on different layers.
// Currently a via must be connected to 2 items, that can be on the same layer
LAYER_NUM top_layer, bottom_layer;
ZONE_CONTAINER* zone;
if( (type_end & START_ON_PAD ) == 0 )
{
TRACK* other = track->GetTrace( m_Brd->m_Track, NULL, FLG_START );
if( other == NULL ) // Test a connection to zones
{
if( track->Type() != PCB_VIA_T )
{
zone = m_Brd->HitTestForAnyFilledArea( track->GetStart(),
track->GetLayer(),
track->GetLayer(),
track->GetNet() );
}
else
{
((SEGVIA*)track)->ReturnLayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( track->GetStart(),
top_layer, bottom_layer,
track->GetNet() );
}
}
if( (other == NULL) && (zone == NULL) )
{
flag_erase |= 1;
}
else // segment, via or zone connected to this end
{
track->start = other;
// If a via is connected to this end,
// test if this via has a second item connected.
// If no, remove it with the current segment
if( other && other->Type() == PCB_VIA_T )
{
// search for another segment following the via
track->SetState( BUSY, true );
SEGVIA* via = (SEGVIA*) other;
other = via->GetTrace( m_Brd->m_Track, NULL, FLG_START );
if( other == NULL )
{
via->ReturnLayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( via->GetStart(),
bottom_layer,
top_layer,
via->GetNet() );
}
if( (other == NULL) && (zone == NULL) )
flag_erase |= 2;
track->SetState( BUSY, false );
}
}
}
// if track end point is not connected to a pad,
// test if this track end point is connected to an other track
if( (type_end & END_ON_PAD ) == 0 )
{
TRACK* other = track->GetTrace( m_Brd->m_Track, NULL, FLG_END );
if( other == NULL ) // Test a connection to zones
{
if( track->Type() != PCB_VIA_T )
{
zone = m_Brd->HitTestForAnyFilledArea( track->GetEnd(),
track->GetLayer(),
track->GetLayer(),
track->GetNet() );
}
else
{
((SEGVIA*)track)->ReturnLayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( track->GetEnd(),
top_layer, bottom_layer,
track->GetNet() );
}
}
if ( (other == NULL) && (zone == NULL) )
{
flag_erase |= 0x10;
}
else // segment, via or zone connected to this end
{
track->end = other;
// If a via is connected to this end, test if this via has a second item connected
// if no, remove it with the current segment
if( other && other->Type() == PCB_VIA_T )
{
// search for another segment following the via
track->SetState( BUSY, true );
SEGVIA* via = (SEGVIA*) other;
other = via->GetTrace( m_Brd->m_Track, NULL, FLG_END );
if( other == NULL )
{
via->ReturnLayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( via->GetEnd(),
bottom_layer, top_layer,
via->GetNet() );
}
if( (other == NULL) && (zone == NULL) )
flag_erase |= 0x20;
track->SetState( BUSY, false );
}
}
}
if( flag_erase )
{
// remove segment from board
track->DeleteStructure();
// iterate, because a track connected to the deleted track
// is now perhaps now not connected and should be deleted
item_erased = true;
modified = true;
}
}
}
return modified;
}
