int Convert::execute(int argc, char **argv)
{
// Extract command line arguments.
String inFile = "";
String outFile = "";
String refFile = "";
bool lshift = false;
bool noeof = false;
bool params = false;
bool useBases = false;
bool useEquals = false;
bool useOrigSeq = false;
bool recover = false;
ParameterList inputParameters;
BEGIN_LONG_PARAMETERS(longParameterList)
LONG_STRINGPARAMETER("in", &inFile)
LONG_STRINGPARAMETER("out", &outFile)
LONG_STRINGPARAMETER("refFile", &refFile)
LONG_PARAMETER("lshift", &lshift)
LONG_PARAMETER("noeof", &noeof)
LONG_PARAMETER("recover", &recover)
LONG_PARAMETER("params", ¶ms)
LONG_PARAMETER_GROUP("SequenceConversion")
EXCLUSIVE_PARAMETER("useBases", &useBases)
EXCLUSIVE_PARAMETER("useEquals", &useEquals)
EXCLUSIVE_PARAMETER("useOrigSeq", &useOrigSeq)
LONG_PHONEHOME(VERSION)
END_LONG_PARAMETERS();
inputParameters.Add(new LongParameters ("Input Parameters",
longParameterList));
// parameters start at index 2 rather than 1.
inputParameters.Read(argc, argv, 2);
// If no eof block is required for a bgzf file, set the bgzf file type to
// not look for it.
if(noeof)
{
// Set that the eof block is not required.
BgzfFileType::setRequireEofBlock(false);
}
// Check to see if the in file was specified, if not, report an error.
if(inFile == "")
{
printUsage(std::cerr);
inputParameters.Status();
// In file was not specified but it is mandatory.
std::cerr << "--in is a mandatory argument, "
<< "but was not specified" << std::endl;
return(-1);
}
if(outFile == "")
{
printUsage(std::cerr);
inputParameters.Status();
// In file was not specified but it is mandatory.
std::cerr << "--out is a mandatory argument, "
<< "but was not specified" << std::endl;
return(-1);
}
// Check to see if the ref file was specified.
// Open the reference.
GenomeSequence* refPtr = NULL;
if(refFile != "")
{
refPtr = new GenomeSequence(refFile);
}
SamRecord::SequenceTranslation translation;
if((useBases) && (refPtr != NULL))
{
translation = SamRecord::BASES;
}
else if((useEquals) && (refPtr != NULL))
{
translation = SamRecord::EQUAL;
}
else
{
useOrigSeq = true;
translation = SamRecord::NONE;
}
if(params)
{
inputParameters.Status();
}
// Open the input file for reading.
SamFile samIn;
if(recover) samIn.setAttemptRecovery(true);
samIn.OpenForRead(inFile);
// Open the output file for writing.
SamFile samOut;
samOut.OpenForWrite(outFile);
samOut.SetWriteSequenceTranslation(translation);
samOut.SetReference(refPtr);
// Read the sam header.
SamFileHeader samHeader;
samIn.ReadHeader(samHeader);
// Write the sam header.
samOut.WriteHeader(samHeader);
SamRecord samRecord;
// Set returnStatus to success. It will be changed
// to the failure reason if any of the writes fail.
SamStatus::Status returnStatus = SamStatus::SUCCESS;
while(1) {
try {
// Keep reading records until ReadRecord returns false.
while(samIn.ReadRecord(samHeader, samRecord))
{
// left shift if necessary.
if(lshift)
{
samRecord.shiftIndelsLeft();
}
// Successfully read a record from the file, so write it.
if(!samOut.WriteRecord(samHeader, samRecord))
{
// Failed to write a record.
fprintf(stderr, "%s\n", samOut.GetStatusMessage());
returnStatus = samOut.GetStatus();
}
}
break;
} catch (std::runtime_error e) {
std::cerr << "Caught runtime error: " << e.what() << "\n";
if(!recover) {
std::cerr << "Corrupted BAM file detected - consider using --recover option.\n";
break;
}
std::cerr << "Attempting to resync at next good BGZF block and BAM record.\n";
// XXX need to resync SamFile stream here
bool rc = samIn.attemptRecoverySync(checkSignature, SIGNATURE_LENGTH);
if(rc) {
std::cerr << "Successful resync - some data lost.\n";
continue; // succeeded
}
std::cerr << "Failed to re-sync on data stream.\n";
break; // failed to resync
}
}
std::cerr << std::endl << "Number of records read = " <<
samIn.GetCurrentRecordCount() << std::endl;
std::cerr << "Number of records written = " <<
samOut.GetCurrentRecordCount() << std::endl;
if(refPtr != NULL)
{
delete(refPtr);
}
// Since the reads were successful, return the status based
// on the status of the writes. If any failed, return
// their failure status.
return(returnStatus);
}
int Bam2FastQ::execute(int argc, char **argv)
{
// Extract command line arguments.
String inFile = "";
bool readName = false;
String refFile = "";
String firstOut = "";
String secondOut = "";
String unpairedOut = "";
bool interleave = false;
bool noeof = false;
bool gzip = false;
bool params = false;
myOutBase = "";
myNumMateFailures = 0;
myNumPairs = 0;
myNumUnpaired = 0;
mySplitRG = false;
myQField = "";
myNumQualTagErrors = 0;
myReverseComp = true;
myRNPlus = false;
myFirstRNExt = DEFAULT_FIRST_EXT;
mySecondRNExt = DEFAULT_SECOND_EXT;
myCompression = InputFile::DEFAULT;
ParameterList inputParameters;
BEGIN_LONG_PARAMETERS(longParameterList)
LONG_PARAMETER_GROUP("Required Parameters")
LONG_STRINGPARAMETER("in", &inFile)
LONG_PARAMETER_GROUP("Optional Parameters")
LONG_PARAMETER("readName", &readName)
LONG_PARAMETER("splitRG", &mySplitRG)
LONG_STRINGPARAMETER("qualField", &myQField)
LONG_PARAMETER("merge", &interleave)
LONG_STRINGPARAMETER("refFile", &refFile)
LONG_STRINGPARAMETER("firstRNExt", &myFirstRNExt)
LONG_STRINGPARAMETER("secondRNExt", &mySecondRNExt)
LONG_PARAMETER("rnPlus", &myRNPlus)
LONG_PARAMETER("noReverseComp", &myReverseComp)
LONG_PARAMETER("gzip", &gzip)
LONG_PARAMETER("noeof", &noeof)
LONG_PARAMETER("params", ¶ms)
LONG_PARAMETER_GROUP("Optional OutputFile Names")
LONG_STRINGPARAMETER("outBase", &myOutBase)
LONG_STRINGPARAMETER("firstOut", &firstOut)
LONG_STRINGPARAMETER("secondOut", &secondOut)
LONG_STRINGPARAMETER("unpairedOut", &unpairedOut)
LONG_PHONEHOME(VERSION)
END_LONG_PARAMETERS();
inputParameters.Add(new LongParameters ("Input Parameters",
longParameterList));
// parameters start at index 2 rather than 1.
inputParameters.Read(argc, argv, 2);
// If no eof block is required for a bgzf file, set the bgzf file type to
// not look for it.
if(noeof)
{
// Set that the eof block is not required.
BgzfFileType::setRequireEofBlock(false);
}
if(gzip)
{
myCompression = InputFile::GZIP;
}
// Check to see if the in file was specified, if not, report an error.
if(inFile == "")
{
usage();
inputParameters.Status();
// In file was not specified but it is mandatory.
std::cerr << "--in is a mandatory argument, "
<< "but was not specified" << std::endl;
return(-1);
}
// Cannot specify both interleaved & secondOut since secondOut would be N/A.
if(interleave && !secondOut.IsEmpty())
{
usage();
inputParameters.Status();
std::cerr << "ERROR: Cannot specify --merge & --secondOut.\n";
return(-1);
}
// Cannot specify both interleaved & secondOut since secondOut would be N/A.
if(interleave && !secondOut.IsEmpty())
{
usage();
inputParameters.Status();
std::cerr << "ERROR: Cannot specify --merge & --secondOut.\n";
return(-1);
}
// Cannot specify both splitRG & firstOut/secondOut/unpairedOut
// since it needs a different file for each RG.
if(mySplitRG && (!firstOut.IsEmpty() ||
!secondOut.IsEmpty() || !unpairedOut.IsEmpty()))
{
usage();
inputParameters.Status();
std::cerr << "ERROR: Cannot specify --splitRG & --firstOut/--secondOut/--unpairedOut.\n";
std::cerr << "Use --outBase instead.\n";
return(-1);
}
// Cannot specify splitRG & output to stdout.
if(mySplitRG && (myOutBase[0] == '-'))
{
usage();
inputParameters.Status();
std::cerr << "ERROR: Cannot specify --splitRG & write to stdout.\n";
return(-1);
}
// Check to see if the out file was specified, if not, generate it from
// the input filename.
if(myOutBase == "")
{
// Just remove the extension from the input filename.
int extStart = inFile.FastFindLastChar('.');
if(extStart <= 0)
{
myOutBase = inFile;
}
else
{
myOutBase = inFile.Left(extStart);
}
}
if(mySplitRG)
{
std::string fqList = myOutBase.c_str();
fqList += ".list";
myFqList = ifopen(fqList.c_str(), "w");
ifprintf(myFqList, "MERGE_NAME\tFASTQ1\tFASTQ2\tRG\n");
}
// Check to see if the first/second/single-ended were specified and
// if not, set them.
myFirstFileNameExt = "_1.fastq";
mySecondFileNameExt = "_2.fastq";
myUnpairedFileNameExt = ".fastq";
if(interleave)
{
myFirstFileNameExt = "_interleaved.fastq";
myFirstFileNameExt = "_interleaved.fastq";
}
getFileName(firstOut, myFirstFileNameExt);
getFileName(secondOut, mySecondFileNameExt);
getFileName(unpairedOut, myUnpairedFileNameExt);
if(params)
{
inputParameters.Status();
}
// Open the files for reading/writing.
// Open prior to opening the output files,
// so if there is an error, the outputs don't get created.
SamFile samIn;
samIn.OpenForRead(inFile, &mySamHeader);
// Skip non-primary reads.
samIn.SetReadFlags(0, 0x0100);
// Open the output files if not splitting RG
if(!mySplitRG)
{
myUnpairedFile = ifopen(unpairedOut, "w", myCompression);
// Only open the first file if it is different than an already opened file.
if(firstOut != unpairedOut)
{
myFirstFile = ifopen(firstOut, "w", myCompression);
}
else
{
myFirstFile = myUnpairedFile;
}
// If it is interleaved or the 2nd file is not a new name, set it appropriately.
if(interleave || secondOut == firstOut)
{
mySecondFile = myFirstFile;
}
else if(secondOut == unpairedOut)
{
mySecondFile = myUnpairedFile;
}
else
{
mySecondFile = ifopen(secondOut, "w", myCompression);
}
if(myUnpairedFile == NULL)
{
std::cerr << "Failed to open " << unpairedOut
<< " so can't convert bam2FastQ.\n";
return(-1);
}
if(myFirstFile == NULL)
{
std::cerr << "Failed to open " << firstOut
<< " so can't convert bam2FastQ.\n";
return(-1);
}
if(mySecondFile == NULL)
{
std::cerr << "Failed to open " << secondOut
<< " so can't convert bam2FastQ.\n";
return(-1);
}
}
if((readName) || (strcmp(mySamHeader.getSortOrder(), "queryname") == 0))
{
readName = true;
}
else
{
// defaulting to coordinate sorted.
samIn.setSortedValidation(SamFile::COORDINATE);
}
// Setup the '=' translation if the reference was specified.
if(!refFile.IsEmpty())
{
GenomeSequence* refPtr = new GenomeSequence(refFile);
samIn.SetReadSequenceTranslation(SamRecord::BASES);
samIn.SetReference(refPtr);
}
SamRecord* recordPtr;
int16_t samFlag;
SamStatus::Status returnStatus = SamStatus::SUCCESS;
while(returnStatus == SamStatus::SUCCESS)
{
recordPtr = myPool.getRecord();
if(recordPtr == NULL)
{
// Failed to allocate a new record.
throw(std::runtime_error("Failed to allocate a new SAM/BAM record"));
}
if(!samIn.ReadRecord(mySamHeader, *recordPtr))
{
// Failed to read a record.
returnStatus = samIn.GetStatus();
continue;
}
// Have a record. Check to see if it is a pair or unpaired read.
samFlag = recordPtr->getFlag();
if(SamFlag::isPaired(samFlag))
{
if(readName)
{
handlePairedRN(*recordPtr);
}
else
{
handlePairedCoord(*recordPtr);
}
}
else
{
++myNumUnpaired;
writeFastQ(*recordPtr, myUnpairedFile,
myUnpairedFileNameExt);
}
}
// Flush All
cleanUpMateMap(0, true);
if(returnStatus == SamStatus::NO_MORE_RECS)
{
returnStatus = SamStatus::SUCCESS;
}
samIn.Close();
closeFiles();
// Output the results
std::cerr << "\nFound " << myNumPairs << " read pairs.\n";
std::cerr << "Found " << myNumUnpaired << " unpaired reads.\n";
if(myNumMateFailures != 0)
{
std::cerr << "Failed to find mates for " << myNumMateFailures
<< " reads, so they were written as unpaired\n"
<< " (not included in either of the above counts).\n";
}
if(myNumQualTagErrors != 0)
{
std::cerr << myNumQualTagErrors << " records did not have tag "
<< myQField.c_str() << " or it was invalid, so the quality field was used for those records.\n";
}
return(returnStatus);
}
