Ejemplo n.º 1
0
	CMS(Section* configuration):Module_base(configuration) {
		Section_prop * section = static_cast<Section_prop *>(configuration);
		Bitu sample_rate_temp = section->Get_int("oplrate");
		sample_rate = static_cast<double>(sample_rate_temp);
		base_port = section->Get_hex("sbbase");
		WriteHandler.Install(base_port, write_cms, IO_MB,4);

		// A standalone Gameblaster has a magic chip on it which is
		// sometimes used for detection.
		const char * sbtype=section->Get_string("sbtype");
		if (!strcasecmp(sbtype,"gb")) {
			DetWriteHandler.Install(base_port+4,write_cms_detect,IO_MB,12);
			DetReadHandler.Install(base_port,read_cms_detect,IO_MB,16);
		}

		/* Register the Mixer CallBack */
		cms_chan = MixerChan.Install(CMS_CallBack,sample_rate_temp,"CMS");
	
		last_command = PIC_Ticks;
	
		for (int s=0;s<2;s++) {
			struct SAA1099 *saa = &saa1099[s];
			memset(saa, 0, sizeof(struct SAA1099));
		}
	}
Ejemplo n.º 2
0
void MENU_Check_Drive(HMENU handle, int cdrom, int floppy, int local, int image, int automount, int umount, char drive) {
#if !defined(HX_DOS)
	std::string full_drive(1, drive);
	Section_prop * sec = static_cast<Section_prop *>(control->GetSection("dos"));
	full_drive += ":\\";
	EnableMenuItem(handle, cdrom, (Drives[drive - 'A'] || menu.boot) ? MF_GRAYED : MF_ENABLED);
	EnableMenuItem(handle, floppy, (Drives[drive - 'A'] || menu.boot) ? MF_GRAYED : MF_ENABLED);
	EnableMenuItem(handle, local, (Drives[drive - 'A'] || menu.boot) ? MF_GRAYED : MF_ENABLED);
	EnableMenuItem(handle, image, (Drives[drive - 'A'] || menu.boot) ? MF_GRAYED : MF_ENABLED);
	if(sec) EnableMenuItem(handle, automount, AUTOMOUNT(full_drive.c_str(), drive) && !menu.boot && sec->Get_bool("automount") ? MF_ENABLED : MF_GRAYED);
	EnableMenuItem(handle, umount, (!Drives[drive - 'A']) || menu.boot ? MF_GRAYED : MF_ENABLED);
#endif
}
Ejemplo n.º 3
0
/*
 * Initialize config file settings
 */
void FIRMWARE_Init(void)
{
	char **list;
	std::string config_path, rc_file;
	Section_prop *secprop;
	Section_line *secline;
	Prop_int *Pint;
	Prop_hex *Phex;
	Prop_string *Pstring;
	Prop_bool *Pbool;
	Prop_multival *Pmulti;
	Prop_multival_remain *Pmulti_remain;

	/* Configuration file directory */
	Cross::GetPlatformConfigDir(config_path);

	// Create list of supported firmware systems
	list = initFirmwareList();

	// Setup firmware config file options
	secprop=control->AddSection_prop("firmware", &FIRMWARE_Config);

	// System type to use
	Pstring = secprop->Add_string("system", Property::Changeable::OnlyAtStart, list[0]);
	Pstring->Set_values(list);
	Pstring->Set_help("Select the firmware to use.");

	// System configuration file
	rc_file = config_path + "sys.rc";
	Pstring = secprop->Add_path("sysrc", Property::Changeable::OnlyAtStart, rc_file.c_str());
	Pstring->Set_help("Path to the system configuration file.");

	// Boot rc file
	rc_file = config_path + "boot.rc";
	Pstring = secprop->Add_path("bootrc", Property::Changeable::OnlyAtStart, rc_file.c_str());
	Pstring->Set_help("Path to the boot configuration file.");
}
Ejemplo n.º 4
0
bool Config::PrintConfig(char const * const configfilename,bool everything) const {
	char temp[50];char helpline[256];
	FILE* outfile=fopen(configfilename,"w+t");
	if(outfile==NULL) return false;

	/* Print start of configfile and add an return to improve readibility. */
	fprintf(outfile,MSG_Get("CONFIGFILE_INTRO"),VERSION);
	fprintf(outfile,"\n");
	for (const_it tel=sectionlist.begin(); tel!=sectionlist.end(); tel++){
		/* Print out the Section header */
		Section_prop *sec = dynamic_cast<Section_prop *>(*tel);
		strcpy(temp,(*tel)->GetName());
		lowcase(temp);

		if (sec) {
			int mods=0;
			Property *p;
			size_t i = 0, maxwidth = 0;
			while ((p = sec->Get_prop(i++))) {
				if (!everything && !p->modified()) continue;

				size_t w = strlen(p->propname.c_str());
				if (w > maxwidth) maxwidth = w;
				mods++;
			}

			if (!everything && mods == 0) {
				/* nothing to print */
				continue;
			}

			fprintf(outfile,"[%s]\n",temp);

			i=0;
			char prefix[80];
			snprintf(prefix,80, "\n# %*s  ", (int)maxwidth, "");
			while ((p = sec->Get_prop(i++))) {
				if (!everything && !p->modified()) continue;

				std::string help = p->Get_help();
				std::string::size_type pos = std::string::npos;
				while ((pos = help.find("\n", pos+1)) != std::string::npos) {
					help.replace(pos, 1, prefix);
				}

				std::vector<Value> values = p->GetValues();

				if (help != "" || !values.empty()) {
					fprintf(outfile, "# %*s: %s", (int)maxwidth, p->propname.c_str(), help.c_str());

					if (!values.empty()) {
						fprintf(outfile, "%s%s:", prefix, MSG_Get("CONFIG_SUGGESTED_VALUES"));
						std::vector<Value>::iterator it = values.begin();
						while (it != values.end()) {
							if((*it).ToString() != "%u") { //Hack hack hack. else we need to modify GetValues, but that one is const...
								if (it != values.begin()) fputs(",", outfile);
								fprintf(outfile, " %s", (*it).ToString().c_str());
							}
							++it;
						}
						fprintf(outfile,".");
					}
					fprintf(outfile, "\n");
				}
			}
		} else {
			fprintf(outfile,"[%s]\n",temp);

			upcase(temp);
			strcat(temp,"_CONFIGFILE_HELP");
			const char * helpstr=MSG_Get(temp);
			char * helpwrite=helpline;
			while (*helpstr) {
				*helpwrite++=*helpstr;
				if (*helpstr == '\n') {
					*helpwrite=0;
					fprintf(outfile,"# %s",helpline);
					helpwrite=helpline;
				}
				helpstr++;
			}
		}
	   
		(*tel)->PrintData(outfile,everything);
		fprintf(outfile,"\n");		/* Always an empty line between sections */
	}
	fclose(outfile);
	return true;
}
Ejemplo n.º 5
0
void CONFIG::Run(void) {
	static const char* const params[] = {
		"-r", "-wcp", "-wcd", "-wc", "-writeconf", "-l", "-rmconf",
		"-h", "-help", "-?", "-axclear", "-axadd", "-axtype", "-get", "-set",
		"-writelang", "-wl", "-securemode", "" };
	enum prs {
		P_NOMATCH, P_NOPARAMS, // fixed return values for GetParameterFromList
		P_RESTART,
		P_WRITECONF_PORTABLE, P_WRITECONF_DEFAULT, P_WRITECONF, P_WRITECONF2,
		P_LISTCONF,	P_KILLCONF,
		P_HELP, P_HELP2, P_HELP3,
		P_AUTOEXEC_CLEAR, P_AUTOEXEC_ADD, P_AUTOEXEC_TYPE,
		P_GETPROP, P_SETPROP,
		P_WRITELANG, P_WRITELANG2,
		P_SECURE
	} presult = P_NOMATCH;
	
	bool first = true;
	std::vector<std::string> pvars;
	// Loop through the passed parameters
	while(presult != P_NOPARAMS) {
		presult = (enum prs)cmd->GetParameterFromList(params, pvars);
		switch(presult) {
		
		case P_RESTART:
			if (securemode_check()) return;
			if (pvars.size() == 0) restart_program(control->startup_params);
			else {
				std::vector<std::string> restart_params;
				restart_params.push_back(control->cmdline->GetFileName());
				for(size_t i = 0; i < pvars.size(); i++) {
					restart_params.push_back(pvars[i]);
					if (pvars[i].find(' ') != std::string::npos) {
						pvars[i] = "\""+pvars[i]+"\""; // add back spaces
					}
				}
				// the rest on the commandline, too
				cmd->FillVector(restart_params);
				restart_program(restart_params);
			}
			return;
		
		case P_LISTCONF: {
			Bitu size = control->configfiles.size();
			std::string config_path;
			Cross::GetPlatformConfigDir(config_path);
			WriteOut(MSG_Get("PROGRAM_CONFIG_CONFDIR"), VERSION,config_path.c_str());
			if (size==0) WriteOut(MSG_Get("PROGRAM_CONFIG_NOCONFIGFILE"));
			else {
				WriteOut(MSG_Get("PROGRAM_CONFIG_PRIMARY_CONF"),control->configfiles.front().c_str());
				if (size > 1) {
					WriteOut(MSG_Get("PROGRAM_CONFIG_ADDITIONAL_CONF"));
					for(Bitu i = 1; i < size; i++)
						WriteOut("%s\n",control->configfiles[i].c_str());
				}
			}
			if (control->startup_params.size() > 0) {
				std::string test;
				for(size_t k = 0; k < control->startup_params.size(); k++)
					test += control->startup_params[k] + " ";
				WriteOut(MSG_Get("PROGRAM_CONFIG_PRINT_STARTUP"), test.c_str());
			}
			break;
		}
		case P_WRITECONF: case P_WRITECONF2:
			if (securemode_check()) return;
			if (pvars.size() > 1) return;
			else if (pvars.size() == 1) {
				// write config to specific file, except if it is an absolute path
				writeconf(pvars[0], !Cross::IsPathAbsolute(pvars[0]));
			} else {
				// -wc without parameter: write primary config file
				if (control->configfiles.size()) writeconf(control->configfiles[0], false);
				else WriteOut(MSG_Get("PROGRAM_CONFIG_NOCONFIGFILE"));
			}
			break;
		case P_WRITECONF_DEFAULT: {
			// write to /userdir/dosbox0.xx.conf
			if (securemode_check()) return;
			if (pvars.size() > 0) return;
			std::string confname;
			Cross::GetPlatformConfigName(confname);
			writeconf(confname, true);
			break;
		}
		case P_WRITECONF_PORTABLE:
			if (securemode_check()) return;
			if (pvars.size() > 1) return;
			else if (pvars.size() == 1) {
				// write config to startup directory
				writeconf(pvars[0], false);
			} else {
				// -wcp without parameter: write dosbox.conf to startup directory
				if (control->configfiles.size()) writeconf(std::string("dosbox.conf"), false);
				else WriteOut(MSG_Get("PROGRAM_CONFIG_NOCONFIGFILE"));
			}
			break;

		case P_NOPARAMS:
			if (!first) break;

		case P_NOMATCH:
			WriteOut(MSG_Get("PROGRAM_CONFIG_USAGE"));
			return;

		case P_HELP: case P_HELP2: case P_HELP3: {
			switch(pvars.size()) {
			case 0:
				WriteOut(MSG_Get("PROGRAM_CONFIG_USAGE"));
				return;
			case 1: {
				if (!strcasecmp("sections",pvars[0].c_str())) {
					// list the sections
					WriteOut(MSG_Get("PROGRAM_CONFIG_HLP_SECTLIST"));
					Bitu i = 0;
					while(true) {
						Section* sec = control->GetSection(i++);
						if (!sec) break;
						WriteOut("%s\n",sec->GetName());
					}
					return;
				}
				// if it's a section, leave it as one-param
				Section* sec = control->GetSection(pvars[0].c_str());
				if (!sec) {
					// could be a property
					sec = control->GetSectionFromProperty(pvars[0].c_str());
					if (!sec) {
						WriteOut(MSG_Get("PROGRAM_CONFIG_PROPERTY_ERROR"));
						return;
					}
					pvars.insert(pvars.begin(),std::string(sec->GetName()));
				}
				break;
			}
			case 2: {
				// sanity check
				Section* sec = control->GetSection(pvars[0].c_str());
				Section* sec2 = control->GetSectionFromProperty(pvars[1].c_str());
				if (sec != sec2) {
					WriteOut(MSG_Get("PROGRAM_CONFIG_PROPERTY_ERROR"));
				}
				break;
			}
			default:
				WriteOut(MSG_Get("PROGRAM_CONFIG_USAGE"));
				return;
			}	
			// if we have one value in pvars, it's a section
			// two values are section + property
			Section* sec = control->GetSection(pvars[0].c_str());
			if (sec==NULL) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_PROPERTY_ERROR"));
				return;
			}
			Section_prop* psec = dynamic_cast <Section_prop*>(sec);
			if (psec==NULL) {
				// failed; maybe it's the autoexec section?
				Section_line* pline = dynamic_cast <Section_line*>(sec);
				if (pline==NULL) E_Exit("Section dynamic cast failed.");

				WriteOut(MSG_Get("PROGRAM_CONFIG_HLP_LINEHLP"),
					pline->GetName(),
					// this is 'unclean' but the autoexec section has no help associated
					MSG_Get("AUTOEXEC_CONFIGFILE_HELP"),
					pline->data.c_str() );
				return;
			} 
			if (pvars.size()==1) {
				size_t i = 0;
				WriteOut(MSG_Get("PROGRAM_CONFIG_HLP_SECTHLP"),pvars[0].c_str());
				while(true) {
					// list the properties
					Property* p = psec->Get_prop(i++);
					if (p==NULL) break;
					WriteOut("%s\n", p->propname.c_str());
				}
			} else {
				// find the property by it's name
				size_t i = 0;
				while (true) {
					Property *p = psec->Get_prop(i++);
					if (p==NULL) break;
					if (!strcasecmp(p->propname.c_str(),pvars[1].c_str())) {
						// found it; make the list of possible values
						std::string propvalues;
						std::vector<Value> pv = p->GetValues();
						
						if (p->Get_type()==Value::V_BOOL) {
							// possible values for boolean are true, false
							propvalues += "true, false";
						} else if (p->Get_type()==Value::V_INT) {
							// print min, max for integer values if used
							Prop_int* pint = dynamic_cast <Prop_int*>(p);
							if (pint==NULL) E_Exit("Int property dynamic cast failed.");
							if (pint->getMin() != pint->getMax()) {
								std::ostringstream oss;
								oss << pint->getMin();
								oss << "..";
								oss << pint->getMax();
								propvalues += oss.str();
							}
						}
						for(Bitu k = 0; k < pv.size(); k++) {
							if (pv[k].ToString() =="%u")
								propvalues += MSG_Get("PROGRAM_CONFIG_HLP_POSINT");
							else propvalues += pv[k].ToString();
							if ((k+1) < pv.size()) propvalues += ", ";
						}

						WriteOut(MSG_Get("PROGRAM_CONFIG_HLP_PROPHLP"),
							p->propname.c_str(),
							sec->GetName(),
							p->Get_help(),propvalues.c_str(),
							p->Get_Default_Value().ToString().c_str(),
							p->GetValue().ToString().c_str());
						// print 'changability'
						if (p->getChange()==Property::Changeable::OnlyAtStart) {
							WriteOut(MSG_Get("PROGRAM_CONFIG_HLP_NOCHANGE"));
						}
						return;
					}
				}
				break;
			}
			return;
		}
		case P_AUTOEXEC_CLEAR: {
			Section_line* sec = dynamic_cast <Section_line*>
				(control->GetSection(std::string("autoexec")));
			sec->data.clear();
			break;
		}
		case P_AUTOEXEC_ADD: {
			if (pvars.size() == 0) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_MISSINGPARAM"));
				return;
			}
			Section_line* sec = dynamic_cast <Section_line*>
				(control->GetSection(std::string("autoexec")));

			for(Bitu i = 0; i < pvars.size(); i++) sec->HandleInputline(pvars[i]);
			break;
		}
		case P_AUTOEXEC_TYPE: {
			Section_line* sec = dynamic_cast <Section_line*>
				(control->GetSection(std::string("autoexec")));
			WriteOut("\n%s",sec->data.c_str());
			break;
		}
		case P_GETPROP: {
			// "section property"
			// "property"
			// "section"
			// "section" "property"
			if (pvars.size()==0) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_GET_SYNTAX"));
				return;
			}
			std::string::size_type spcpos = pvars[0].find_first_of(' ');
			// split on the ' '
			if (spcpos != std::string::npos) {
				pvars.insert(++pvars.begin(),pvars[0].substr(spcpos+1));
				pvars[0].erase(spcpos);
			}
			switch(pvars.size()) {
			case 1: {
				// property/section only
				// is it a section?
				Section* sec = control->GetSection(pvars[0].c_str());
				if (sec) {
					// list properties in section
					Bitu i = 0;
					Section_prop* psec = dynamic_cast <Section_prop*>(sec);
					if (psec==NULL) {
						// autoexec section
						Section_line* pline = dynamic_cast <Section_line*>(sec);
						if (pline==NULL) E_Exit("Section dynamic cast failed.");

						WriteOut("%s",pline->data.c_str());
						break;
					}
					while(true) {
						// list the properties
						Property* p = psec->Get_prop(i++);
						if (p==NULL) break;
						WriteOut("%s=%s\n", p->propname.c_str(),
							p->GetValue().ToString().c_str());
					}
				} else {
					// no: maybe it's a property?
					sec = control->GetSectionFromProperty(pvars[0].c_str());
					if (!sec) {
						WriteOut(MSG_Get("PROGRAM_CONFIG_PROPERTY_ERROR"));
						return;
					}
					// it's a property name
					std::string val = sec->GetPropValue(pvars[0].c_str());
					WriteOut("%s",val.c_str());
				}
				break;
			}
			case 2: {
				// section + property
				Section* sec = control->GetSection(pvars[0].c_str());
				if (!sec) {
					WriteOut(MSG_Get("PROGRAM_CONFIG_SECTION_ERROR"));
					return;
				}
				std::string val = sec->GetPropValue(pvars[1].c_str());
				if (val == NO_SUCH_PROPERTY) {
					WriteOut(MSG_Get("PROGRAM_CONFIG_NO_PROPERTY"),
						pvars[1].c_str(),pvars[0].c_str());   
					return;
				}
				WriteOut("%s",val.c_str());
				break;
			}
			default:
				WriteOut(MSG_Get("PROGRAM_CONFIG_GET_SYNTAX"));
				return;
			}
			return;
		}
		case P_SETPROP:	{
			// Code for the configuration changes
			// Official format: config -set "section property=value"
			// Accepted: with or without -set, 
			// "section property value"
			// "section property=value"
			// "property" "value"
			// "section" "property=value"
			// "section" "property=value" "value" "value" ...
			// "section" "property" "value" "value" ...
			// "section property" "value" "value" ...
			// "property" "value" "value" ...
			// "property=value" "value" "value" ...

			if (pvars.size()==0) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_SET_SYNTAX"));
				return;
			}

			// add rest of command
			std::string rest;
			if (cmd->GetStringRemain(rest)) pvars.push_back(rest);

			// attempt to split off the first word
			std::string::size_type spcpos = pvars[0].find_first_of(' ');
			std::string::size_type equpos = pvars[0].find_first_of('=');

			if ((equpos != std::string::npos) && 
				((spcpos == std::string::npos) || (equpos < spcpos))) {
				// If we have a '=' possibly before a ' ' split on the =
				pvars.insert(++pvars.begin(),pvars[0].substr(equpos+1));
				pvars[0].erase(equpos);
				// As we had a = the first thing must be a property now
				Section* sec=control->GetSectionFromProperty(pvars[0].c_str());
				if (sec) pvars.insert(pvars.begin(),std::string(sec->GetName()));
				else {
					WriteOut(MSG_Get("PROGRAM_CONFIG_PROPERTY_ERROR"));
					return;
				}
				// order in the vector should be ok now
			} else {
				if ((spcpos != std::string::npos) &&
					((equpos == std::string::npos) || (spcpos < equpos))) {
					// ' ' before a possible '=', split on the ' '
					pvars.insert(++pvars.begin(),pvars[0].substr(spcpos+1));
					pvars[0].erase(spcpos);
				}
				// check if the first parameter is a section or property
				Section* sec = control->GetSection(pvars[0].c_str());
				if (!sec) {
					// not a section: little duplicate from above
					Section* sec=control->GetSectionFromProperty(pvars[0].c_str());
					if (sec) pvars.insert(pvars.begin(),std::string(sec->GetName()));
					else {
						WriteOut(MSG_Get("PROGRAM_CONFIG_PROPERTY_ERROR"));
						return;
					}
				} else {
					// first of pvars is most likely a section, but could still be gus
					// have a look at the second parameter
					if (pvars.size() < 2) {
						WriteOut(MSG_Get("PROGRAM_CONFIG_SET_SYNTAX"));
						return;
					}
					std::string::size_type spcpos2 = pvars[1].find_first_of(' ');
					std::string::size_type equpos2 = pvars[1].find_first_of('=');
					if ((equpos2 != std::string::npos) && 
						((spcpos2 == std::string::npos) || (equpos2 < spcpos2))) {
						// split on the =
						pvars.insert(pvars.begin()+2,pvars[1].substr(equpos2+1));
						pvars[1].erase(equpos2);
					} else if ((spcpos2 != std::string::npos) &&
						((equpos2 == std::string::npos) || (spcpos2 < equpos2))) {
						// split on the ' '
						pvars.insert(pvars.begin()+2,pvars[1].substr(spcpos2+1));
						pvars[1].erase(spcpos2);
					}
					// is this a property?
					Section* sec2 = control->GetSectionFromProperty(pvars[1].c_str());
					if (!sec2) {
						// not a property, 
						Section* sec3 = control->GetSectionFromProperty(pvars[0].c_str());
						if (sec3) {
							// section and property name are identical
							pvars.insert(pvars.begin(),pvars[0]);
						} // else has been checked above already
					}
				}
			}
			if(pvars.size() < 3) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_SET_SYNTAX"));
				return;
			}
			// check if the property actually exists in the section
			Section* sec2 = control->GetSectionFromProperty(pvars[1].c_str());
			if (!sec2) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_NO_PROPERTY"),
					pvars[1].c_str(),pvars[0].c_str());
				return;
			}
			// Input has been parsed (pvar[0]=section, [1]=property, [2]=value)
			// now execute
			Section* tsec = control->GetSection(pvars[0]);
			std::string value;
			value += pvars[2];
			for(Bitu i = 3; i < pvars.size(); i++) value += (std::string(" ") + pvars[i]);
			std::string inputline = pvars[1] + "=" + value;
			
			tsec->ExecuteDestroy(false);
			bool change_success = tsec->HandleInputline(inputline.c_str());
			if (!change_success) WriteOut(MSG_Get("PROGRAM_CONFIG_VALUE_ERROR"),
				value.c_str(),pvars[1].c_str());
			tsec->ExecuteInit(false);
			return;
		}
		case P_WRITELANG: case P_WRITELANG2:
			// In secure mode don't allow a new languagefile to be created
			// Who knows which kind of file we would overwrite.
			if (securemode_check()) return;
			if (pvars.size() < 1) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_MISSINGPARAM"));
				return;
			}
			if (!MSG_Write(pvars[0].c_str())) {
				WriteOut(MSG_Get("PROGRAM_CONFIG_FILE_ERROR"),pvars[0].c_str());
				return;
			}
			break;

		case P_SECURE:
			// Code for switching to secure mode
			control->SwitchToSecureMode();
			WriteOut(MSG_Get("PROGRAM_CONFIG_SECURE_ON"));
			return;

		default:
			E_Exit("bug");
			break;
		}
		first = false;
	}
	return;
}
Ejemplo n.º 6
0
Section_prop* Config::AddSection_prop(char const * const _name,void (*_initfunction)(Section*),bool canchange){
	Section_prop* blah = new Section_prop(_name);
	blah->AddInitFunction(_initfunction,canchange);
	sectionlist.push_back(blah);
	return blah;
}
Ejemplo n.º 7
0
/*
 * Get a property string
 */
const char *FIRMWARE::propString(const char *prop)
{
	Section_prop *section = static_cast<Section_prop *>(m_configuration);

	return section->Get_string(prop);
}
Ejemplo n.º 8
0
bool DISNEY_ShouldInit() {
	Section_prop *sec = (Section_prop*)control->GetSection("speaker");
	return sec->Get_bool("disney");
}
Ejemplo n.º 9
0
bool MENU_SetBool(std::string secname, std::string value) {
	Section_prop * sec = static_cast<Section_prop *>(control->GetSection(secname));
	if(sec) SetVal(secname, value, sec->Get_bool(value) ? "false" : "true");
	return sec->Get_bool(value);
}