/********************************************************************************************
> OpState OpBaseConvertPathSegment::BaseGetState(INT32 PathType)
Author: Peter_Arnold (Xara Group Ltd) <*****@*****.**>
Created: 16/8/95
Inputs: Type of the path that ends a segment
Returns: The tick/grey state of OpBaseConvertPathSegment and derived classes
Purpose: For finding the state of this op
SeeAlso: OpState
********************************************************************************************/
OpState OpBaseConvertPathSegment::BaseGetState(INT32 PathType)
{
OpState OpSt;
#ifndef STANDALONE
SelRange* Selected = GetApplication()->FindSelection();
if ((Document::GetSelected() == NULL) || (Selected == NULL) )
{ // There is no selected document or selrange is invalid
OpSt.Greyed = TRUE;
return OpSt;
}
Node* pNode = Selected->FindFirst();
BOOL FoundSegment = FALSE;
BOOL AllConverted = TRUE;
BOOL PrevSelected = FALSE;
while ((pNode != NULL) && AllConverted)
{
if (pNode->IsNodePath() && ((NodePath*)pNode)->IsPathAllowable())
{
Path* ThisPath = &(((NodePath*)pNode)->InkPath);
PathFlags* Flags = ThisPath->GetFlagArray();
PathVerb* Verbs = ThisPath->GetVerbArray();
INT32 UsedSlots = ThisPath->GetNumCoords();
PrevSelected = FALSE;
for (INT32 i=0; i<UsedSlots; i++)
{
if (Flags[i].IsEndPoint)
{
if (Flags[i].IsSelected)
{
if (PrevSelected && ((Verbs[i] & ~PT_CLOSEFIGURE) != PT_MOVETO) )
{
FoundSegment = TRUE;
if ((Verbs[i] & ~PT_CLOSEFIGURE) != PathType)
AllConverted = FALSE;
}
PrevSelected = TRUE;
}
else
{
PrevSelected = FALSE;
}
}
}
}
pNode = Selected->FindNext(pNode);
}
OpSt.Greyed = !FoundSegment;
OpSt.Ticked = AllConverted && FoundSegment;
#endif // #ifdef STANDALONE
return OpSt;
}
OpState OpBreakAtPoints::GetState(String_256* UIDescription, OpDescriptor*)
{
OpState OpSt;
String_256 DisableReason;
OpSt.Greyed = FALSE;
BOOL FoundSelected = FALSE;
// Go through the selection until we find a selected point
SelRange* Selected = GetApplication()->FindSelection();
Node* pNode = Selected->FindFirst();
while (pNode)
{
if (IS_A(pNode,NodePath) || IS_A(pNode,NodeBlendPath))
{
NodePath* pNodePath = (NodePath*)pNode;
INT32 NumSplinters = pNodePath->InkPath.NumSplinters();
if (NumSplinters > 0)
{
// We need to ask the effected nodes if they (and their parents) can handle this node being replaced
ObjChangeFlags cFlags;
if (NumSplinters > 1)
cFlags.MultiReplaceNode = TRUE; // Node will be replaced with more than one node.
else
cFlags.ReplaceNode = TRUE; // Node will be replaced with one node only.
String_32 optokenstring(OPTOKEN_BREAKATPOINTS);
ObjChangeParamWithToken ObjChange(OBJCHANGE_STARTING,cFlags,pNodePath,NULL,&optokenstring);
// Will the node allow this op to happen?
if (pNodePath->AllowOp(&ObjChange,FALSE))
{
FoundSelected = TRUE;
break;
}
}
}
pNode = Selected->FindNext(pNode);
}
// The operation is disabled if there are no complex paths selected
if (!FoundSelected)
{
OpSt.Greyed = TRUE;
DisableReason = String_256(_R(IDS_NEEDS_SELECTED_POINT));
*UIDescription = DisableReason;
}
return(OpSt);
}
OpState OpNudge::GetState(String_256* UIDescription, OpDescriptor*)
{
OpState OpSt;
SelRange* pSelRange = GetApplication()->FindSelection();
if (pSelRange != NULL && pSelRange->FindFirst() != NULL)
OpSt.Greyed = FALSE;
else
OpSt.Greyed = TRUE;
return (OpSt);
}
void SelectionState::DeselectAll(BOOL RenderBlobs)
{
// Find the selected objects in the tree;
SelRange* Selected = GetApplication()->FindSelection();
ERROR3IF( Selected==NULL, "Selection object is null in DeselectAll()");
// Get the selected spread
Spread* pSpread = Document::GetSelectedSpread();
ERROR3IF(pSpread == NULL,"NULL selected spread");
// Make sure that we have a spread and a selection
if (pSpread == NULL || Selected == NULL)
return;
// Find first selected node
#if !defined(EXCLUDE_FROM_RALPH)
Node* pFirstSelectedNode = Selected->FindFirst();
// If there is a selection, EOR blobs off, deselect nodes, and inform everybody
if (pFirstSelectedNode != NULL && RenderBlobs)
{
// Go though and render all the EOR blobs off the screen
// Find the Blob Manager
BlobManager* BlobMgr = GetApplication()->GetBlobManager();
ENSURE( BlobMgr!=NULL, "Blob Manager unexpectedly not there.");
// Render all the blobs
BlobMgr->RenderOff(NULL, pFirstSelectedNode->FindParentSpread());
Tool* pTool = Tool::GetCurrent();
// Get the tool to remove all its blobs before we deselect the nodes.
// Only do this if the current tool dosent update itself on sel changed messages
if (pSpread!=NULL && pTool!=NULL && !pTool->AreToolBlobsRenderedOnSelection())
pTool->RenderToolBlobs(pSpread,NULL);
}
#endif
DeselectAll(pSpread->FindFirstChild());
// Selection cache is no longer valid, so update and tell everyone that it has changed
// *Note*, This used to be 'Selected->Update(TRUE)', but I (Will) removed the TRUE, so
// that a message is NOT broadcast. This should only be called from an operation,
// and the op will send a message when it ends.
Selected->Update();
}
void LiveEffectsTool::OnMouseMove(DocCoord Coord, Spread* pSpread, ClickModifiers mods)
{
// Stub out this function if the tool isn't wanted
#ifndef NO_ADVANCED_TOOLS
// We are interested in any selected paths that the cursor is over
// we will also be needing the current docview
SelRange* Selected = GetApplication()->FindSelection();
Node* pNode = Selected->FindFirst();
// Check to see if the selection is on the same spread as the mouse
if (pNode!=NULL)
{
// Get the spread and return if it is different from the one with the cursor
Spread* pNodeSpread = pNode->FindParentSpread();
if (pNodeSpread!=pSpread)
return;
}
// Find the Blob manager, so we can find out how big a rect to use
BlobManager* pBlobMgr = GetApplication()->GetBlobManager();
if (pBlobMgr==NULL)
return;
// Find the Rect round the mouse pos that counts as a hit
DocRect BlobRect;
pBlobMgr->GetBlobRect(Coord, &BlobRect);
// Work out the square of the distance that we will count as 'close' to the line
INT32 Range = BlobRect.Width() / 2;
Range *= Range;
// // loop through the selection
// while (pNode!=NULL)
// {
// // Now find the next selected node
// pNode = Selected->FindNext(pNode);
// }
// We did not find anything good, so set the cursor to the normal one
ChangeCursor(pNormalCursor);
// And set the status bar text
StatusMsg.Load(_R(IDS_LIVEEFFECTSTART), Tool::GetModuleID(GetID()));
GetApplication()->UpdateStatusBarText(&StatusMsg);
#endif // NO_ADVANCED_TOOLS
}
BOOL ViewContextMenu::AskBlobsForItems( Spread* pSpread,
DocCoord ClickPos,
ClickModifiers ClickMods
)
{
// Test for a click on a fill attribute first, as they aren't NodeRenderableInks, and so
// won't be included in the tests below.
// if (AttrFillGeometry::CheckAttrClick(ClickStart, TypeOfClick, ClickMods, StartSpread))
// {
// return TRUE;
// }
// Look for a selected object to pass the click to.
SelRange* pSel = GetApplication()->FindSelection();
if (pSel==NULL)
return FALSE;
Node* pNode = pSel->FindFirst();
if (pNode == NULL)
return FALSE;
// Providing we are displaying object blobs, try passing the click on to each object
// in the selection.
BlobManager* pBlobs = GetApplication()->GetBlobManager();
if (pBlobs && pBlobs->GetCurrentInterest().Object)
{
// For all selected objects . . .
while (pNode != NULL)
{
// Is this node ink-renderable?
if (pNode->IsKindOf(CC_RUNTIME_CLASS(NodeRenderableInk)))
{
// Yes. Does it want the click?
if (((NodeRenderableInk*) pNode)->OnBlobPopUp(pSpread, ClickPos, this))
{
// An object processed the click, so indicate that there's no more to do.
return TRUE;
}
}
// Try the next object in the selection.
pNode = pSel->FindNext(pNode);
}
}
return FALSE;
}
OpState OpReversePath::GetState (String_256* Description, OpDescriptor*)
{
OpState OpSt;
SelRange* Selected = GetApplication ()->FindSelection ();
if ((Document::GetSelected () == NULL) || (Selected == NULL) )
{ // There is no selected document or selrange is invalid
OpSt.Greyed = TRUE;
return (OpSt);
}
if (Selected->Count () == 0) // if there ain't no selection - return cause we ain't
// going to be reversing anything
{
OpSt.Greyed = TRUE;
return (OpSt);
}
Node* pNode = Selected->FindFirst ();
// scan the selection and if even a single DoThisNode fails, then return that the op
// is greyed immediately ....
while (pNode != NULL)
{ // we're only interested in NodePaths which have selected points
BOOL DoThisNode = pNode->IsNodePath ();
//if (DoThisNode)
// DoThisNode = (((NodePath*)pNode)->InkPath.IsSubSelection());
if (DoThisNode)
DoThisNode = (((NodePath*)pNode)->IsPathAllowable ());
if (DoThisNode)
{
pNode = Selected->FindNext (pNode);
}
else
{
pNode = NULL;
OpSt.Greyed = TRUE;
}
}
return (OpSt);
}
/********************************************************************************************
> BOOL OpMenuSelectPathPoints::DoAction(BOOL SelectPoints)
Author: Peter_Arnold (Xara Group Ltd) <*****@*****.**>
Created: 30/04/95
Inputs: SelectPoints - TRUE to select all the points in the path
- FALSE to deslect all the points in the path
Outputs: -
Returns: TRUE/FALSE for success/failure
Purpose: Common code for selecting or deselecting all the points in all the selected
paths.
SeeAlso: -
********************************************************************************************/
BOOL OpMenuSelectPathPoints::DoAction(BOOL SelectPoints)
{
SelRange* pSelection = GetApplication()->FindSelection();
Node* pNode = pSelection->FindFirst();
// Cycle through all the selected paths
while (pNode != NULL)
{
if (pNode->IsNodePath())
{
NodePath* pPath = (NodePath*)pNode;
Spread* pSpread = pNode->FindParentSpread();
ERROR2IF(pSpread == NULL, FALSE, "NodePath didn't have a parent spread");
// Remove the blobs from the path
RenderRegion* pRegion = DocView::RenderOnTop(NULL, pSpread, ClippedEOR);
while (pRegion != NULL)
{
pPath->RenderObjectBlobs(pRegion);
pRegion = DocView::GetNextOnTop(NULL);
}
// Set the selection state
const INT32 NumCoords = pPath->InkPath.GetNumCoords();
for (INT32 loop = 0; loop<NumCoords; loop++)
{
pPath->InkPath.GetFlagArray()[loop].IsSelected = SelectPoints;
}
// Put the blobs back on the path
pRegion = DocView::RenderOnTop(NULL, pSpread, ClippedEOR);
while (pRegion != NULL)
{
pPath->RenderObjectBlobs(pRegion);
pRegion = DocView::GetNextOnTop(NULL);
}
GetApplication()->UpdateSelection();
}
pNode = pSelection->FindNext(pNode);
}
return TRUE;
}
void SelectionState::Restore(BOOL RestoreSelBlobs, BOOL RemoveBlobs)
{
DeselectAll(RemoveBlobs); // Deselect all selections
#ifdef _DEBUG
UINT32 NumRestored = 0;
#endif
// ----------------------------------------------------------------------------------
// Restore all nodes in the SelNdList
UINT32 i;
for (i=0; i < NumNd; i++)
{
// Only NodeRenderableInk nodes should be selected
ENSURE(SelNdList[i]->IsKindOf(CC_RUNTIME_CLASS(NodeRenderableInk)),
"Node to be selected is not a NodeRenderableInk");
// Ensure node to be selected is not already selected
//ENSURE(!(SelNdList[i]->IsSelected()), "Invalid selected node");
// Select the node
SelNdList[i]->SetSelected(TRUE);
#ifdef _DEBUG
NumRestored++;
#endif
}
// ----------------------------------------------------------------------------------
// Restore all nodes in the SelNdRngList
Node* Current;
for (i=0; i < NumNdRng; i++)
{
// A SelNdRng shold represent at least two contiguous selected nodes
ENSURE(SelNdRngList[i].NumSelected >= 2, "Number of nodes in SelNdRng < 2");
UINT32 NumNodesSelected = 0;
Current = SelNdRngList[i].FirstNode; // First node in range
// Select the next SelNdRng->NumSelected nodes
do
{
ENSURE((Current != NULL), "Node in a SelNdRng is NULL, Has tree changed ?" );
// Only NodeRenderableInk nodes should be selected
ENSURE(Current->IsKindOf(CC_RUNTIME_CLASS(NodeRenderableInk)),
"Selected node is not a NodeRenderableInk");
// [Phil, 11/10/2005] The Current node may be a Caret node
// because Carets are included in the selection, even when
// a sub-selection of characters is present, so that attributes
// optimise correctly within the text story
// However, the Record function treats them as single selected
// nodes, not part of a contiguous run of selected nodes to
// allow for them moving around...
// So we should ignore carets here
if (!IS_A(Current, CaretNode))
{
// Ensure SelNode not already selected
ENSURE(!(Current->IsSelected()), "Invalid selected node");
Current->SetSelected(TRUE); // Set the nodes selected flag
NumNodesSelected++;
#ifdef _DEBUG
NumRestored++;
#endif
}
Current = Current->FindNextNonHidden();
}
while (NumNodesSelected != SelNdRngList[i].NumSelected);
}
#if !defined(EXCLUDE_FROM_RALPH)
// Only restore the blobs if any selections have been restored
if (((NumNdRng != 0) || (NumNd !=0)) && RestoreSelBlobs) // We need to restore the selection blobs
{
// Find the current selections
SelRange* pSel;
pSel = GetApplication()->FindSelection();
Current = pSel->FindFirst(); // The first selected node
Spread *pSpread = NULL;
if (Current != NULL)
pSpread = Current->FindParentSpread();
// ENSURE(pSpread != NULL, "First selected node does not have a parent spread");
// It's a legal state to not find a selected node - the layers may all be locked.
if (pSpread == NULL)
{
AttrFillGeometry::LastRenderedMesh = NULL;
return;
}
// Go get the blob manager
BlobManager* BlobMgr = GetApplication()->GetBlobManager();
ENSURE( BlobMgr!=NULL, "Blob Manger was not there when we needed him!");
if (BlobMgr==NULL)
return;
Current = pSel->FindFirst(); // The first selected node
while (Current != NULL)
{
ENSURE(Current->IsSelected(), "Node not selected");
ENSURE(Current->IsKindOf(CC_RUNTIME_CLASS(NodeRenderable)),
"Selected Node not a NodeRenderable");
// Tell the node to add selection blobs
BlobMgr->RenderMyBlobsOn(NULL, pSpread, (NodeRenderable*)Current);
Current = pSel->FindNext(Current); // Get next selected node
}
Tool* pTool = Tool::GetCurrent();
// Get the tool to remove all its blobs before we deselect the nodes.
// Only do this if the current tool dosent update itself on sel changed messages
if (pSpread!=NULL && pTool!=NULL && !pTool->AreToolBlobsRenderedOnSelection())
pTool->RenderToolBlobs(pSpread,NULL);
AttrFillGeometry::LastRenderedMesh = NULL;
}
#endif
#ifdef _DEBUG
//if (IsUserName("Simon"))
// TRACE( _T(" Num Restored = %lu\n"), NumRestored);
#endif
}
BOOL SelectionState::Record()
{
// Make sure that Record has not been called before
ENSURE(((SelNdList == NULL) && (SelNdRngList == NULL)), "SelectionState::Record called twice");
// Find the current selections
SelRange* pSel;
pSel = GetApplication()->FindSelection();
Node* StartRange;
UINT32 SelNdRngListIndex = 0;
UINT32 SelNdListIndex = 0;
UINT32 NumSelectedNodes = pSel->Count();
if (NumSelectedNodes != 0)
{
// At this point we don't know exactly how much memory to allocate for the SelNdRngList
// and SelNdList. So we allocate two temporary arrays which are more than big enough to
// store the selection state. When we have completed recording the selection state into
// these temporary arrays, we know how big the SelNdRngList and SelNdList should
// be. so we can allocate memory for these and then copy the data from the temporary
// arrays into them.
SelNdRng* SelNdRngListTmp = new SelNdRng[NumSelectedNodes];
if (SelNdRngListTmp == NULL)
{
return FALSE;
}
Node** SelNdListTmp = new Node*[NumSelectedNodes];
if (SelNdListTmp == NULL)
{
delete[] SelNdRngListTmp; // Tidy up
return FALSE;
}
// Get the first selected node in the tree
Node * Current = pSel->FindFirst();
Node* Last;
BYTE NumAdjacentSel; // Number of contiguous selected nodes
#ifdef _DEBUG
UINT32 NumSel = 0;
#endif
// always use the selection object to determine next node to store... this fixes bug #10775 whereby
// selected Bevel,Contour & Shadow objects were not being restored on Undo
while (Current != NULL)
{
// At this point Current will always point to the next selected node which needs
// recording.
// Only NodeRenderableInk nodes should be selected
ENSURE(Current->IsKindOf(CC_RUNTIME_CLASS(NodeRenderableInk)),
"A non NodeRenderableInk node is selected");
NumAdjacentSel = 1;
#ifdef _DEBUG
NumSel++;
#endif
StartRange = Current;
Last = Current;
Current = pSel->FindNext(Current); //next from selection
// if we have at least two contiguous nodes, store as a range
if (Current && AreContiguous(Last, Current) && !IS_A(Last, CaretNode) && !IS_A(Current, CaretNode))
{
SelNdRngListTmp[SelNdRngListIndex].FirstNode = StartRange;
do
{
if (IS_A(Current, CaretNode))
{
// Give Caret it's own selection record but don't break the contiguous range
SelNdListTmp[SelNdListIndex] = Current;
SelNdListIndex++;
#ifdef _DEBUG
NumSel++;
#endif
}
else
{
NumAdjacentSel++;
#ifdef _DEBUG
NumSel++;
#endif
}
Last = Current;
Current = pSel->FindNext(Current);
if (Current == NULL)
break;
} while ((AreContiguous(Last,Current)) && (NumAdjacentSel < 255));
// Either there are no more contiguous selected nodes or
// we have hit the maximum number of selected nodes that a SelNdRng can
// represent.
SelNdRngListTmp[SelNdRngListIndex].NumSelected = NumAdjacentSel;
SelNdRngListIndex++;
}
else // Store node in the SelNdLst
{
ERROR3IF(StartRange==NULL, "Trying to add NULL pointer to SelNdList\n");
SelNdListTmp[SelNdListIndex] = StartRange;
SelNdListIndex++;
}
}
ERROR3IF(NumSel!=NumSelectedNodes,"Incorrect selection state stored!");
NumNd = SelNdListIndex;
NumNdRng = SelNdRngListIndex;
if (SelNdRngListIndex != 0)
{
// We have created at least one SelNdRange
SelNdRngList = new SelNdRng[NumNdRng];
if (SelNdRngList == NULL) // Out of memory
{
// Delete the two temporary lists
delete [] SelNdRngListTmp;
delete [] SelNdListTmp;
return FALSE;
}
// Copy the SelNdRngListTmp to the SelNdRngList
memcpy(SelNdRngList, SelNdRngListTmp, sizeof(SelNdRng)*NumNdRng);
}
delete[] SelNdRngListTmp; // No longer required
if (SelNdListIndex != 0)
{
SelNdList = new Node*[NumNd];
if (SelNdList == NULL) // Out of memory
{
delete [] SelNdListTmp;
if (SelNdRngList != NULL) // We allocated the SelNdRng list
{
delete [] SelNdRngList;
}
return FALSE;
}
// copy the SelNdListTmp to the SelNdList
memcpy(SelNdList, SelNdListTmp, sizeof(Node*)*NumNd);
}
delete[] SelNdListTmp; // No longer required
#ifdef _DEBUG
//if (IsUserName("Simon"))
//TRACE( _T("Number of nodes selected = %lu\n"), NumSel);
#endif
}
return (TRUE);
}
/********************************************************************************************
> void OpBaseConvertPathSegment::Do(OpDescriptor*)
Author: Peter_Arnold (Xara Group Ltd) <*****@*****.**>
Created: 16/8/95
Inputs: OpDescriptor (unused)
Purpose: Performs the common SelRange scanning part of converting path segments. Calls
the ProcessSegment function in derived classes to do the actual processing
Errors: -
SeeAlso: -
********************************************************************************************/
void OpBaseConvertPathSegment::Do(OpDescriptor*)
{
#ifndef STANDALONE
// Obtain the current selections and the first node in the selection
SelRange* Selected = GetApplication()->FindSelection();
BOOL ok = (Selected != NULL);
// Start the op
BeginSlowJob();
if (ok)
ok = DoStartSelOp(TRUE,TRUE);
// Check with the selrange it is ok to run this op
ObjChangeFlags cFlags;
ObjChangeParam ObjChange(OBJCHANGE_STARTING,cFlags,NULL,this);
if (ok)
{
if (!Selected->AllowOp(&ObjChange))
{
EndSlowJob();
FailAndExecute();
End();
return;
}
}
Node* pNode = Selected->FindFirst();
NodePath* ThisPath = NULL;
while (ok && (pNode != NULL))
{ // we're only interested in NodePaths which have selected points
BOOL DoThisNode = pNode->IsNodePath();
if (DoThisNode)
DoThisNode = (((NodePath*)pNode)->InkPath.IsSubSelection());
if (DoThisNode)
DoThisNode = (((NodePath*)pNode)->IsPathAllowable());
if ( DoThisNode )
{
// for convenience, cast the pointer to a pointer to a NodePath
ThisPath = (NodePath*)pNode;
// First get pointers to the arrays
PathVerb* Verbs = NULL;
PathFlags* Flags = NULL;
DocCoord* Coords = NULL;
ThisPath->InkPath.GetPathArrays(&Verbs, &Coords, &Flags);
INT32 NumCoords = ThisPath->InkPath.GetNumCoords();
BOOL PrevSelected = FALSE;
INT32 PrevPos = 0;
// Set the NeedToRender flags
INT32 loop;
for (loop = 0; loop < NumCoords; loop++)
{
if (Flags[loop].IsEndPoint && Flags[loop].IsSelected)
Flags[loop].NeedToRender = TRUE;
else
Flags[loop].NeedToRender = FALSE;
}
// Force a re-draw of the place where the path used to be
if (ok)
ok = (RecalcBoundsAction::DoRecalc(this, &UndoActions, ThisPath, TRUE) != AC_FAIL);
// loop through the points
for (loop = 0; loop<NumCoords; loop++)
{
if (Flags[loop].IsEndPoint)
{ // its an endpoint
if (Flags[loop].IsSelected)
{ // which is selected
if (PrevSelected && ((Verbs[loop] & ~PT_CLOSEFIGURE) == GetProcessPathType()) )
{ // and the previous was selected and it's a processable segment
if (ok)
ok = ProcessSegment(ThisPath, &loop, PrevPos);
// Recache array pointers
ThisPath->InkPath.GetPathArrays(&Verbs, &Coords, &Flags);
NumCoords = ThisPath->InkPath.GetNumCoords();
Flags[loop].NeedToRender = TRUE;
}
PrevSelected = TRUE;
PrevPos = loop;
}
else
PrevSelected = FALSE;
}
}
// Having finished processing this path go round and smooth it.
DocCoord NewCoord;
for (loop = 0; (ok && (loop < NumCoords)); loop++)
{
if (Verbs[loop] == PT_BEZIERTO && !(Flags[loop].IsEndPoint) && Flags[loop].IsSmooth)
{
NewCoord = ThisPath->InkPath.SmoothControlPoint(loop);
if (ok && (NewCoord != Coords[loop]))
{
ok = DoAlterPathElement(ThisPath, loop, NewCoord, Flags[loop], Verbs[loop], FALSE);
ThisPath->InkPath.GetPathArrays(&Verbs, &Coords, &Flags);
}
}
}
ThisPath->InvalidateBoundingRect();
// Force a redraw of the place where the path is now.
if (ok)
ok = (RecordBoundsAction::DoRecord(this, &UndoActions, ThisPath, TRUE) != AC_FAIL);
}
pNode = Selected->FindNext(pNode);
}
if (ok)
{
ObjChange.Define(OBJCHANGE_FINISHED,cFlags,NULL,this);
if (!UpdateChangedNodes(&ObjChange))
{
FailAndExecute();
End();
return;
}
}
EndSlowJob();
if (!ok)
{
FailAndExecute();
InformError();
}
#endif
End();
}
void OpReversePath::Do (OpDescriptor*)
{
// Obtain the current selections and the first node in the selection
SelRange* Selected = GetApplication()->FindSelection();
BOOL ok = (Selected != NULL);
// Start the op
BeginSlowJob();
if (ok)
ok = DoStartSelOp(TRUE,TRUE);
// Check with the selrange it is ok to run this op
ObjChangeFlags cFlags;
ObjChangeParam ObjChange(OBJCHANGE_STARTING,cFlags,NULL,this);
if (ok)
{
if (!Selected->AllowOp(&ObjChange))
{
EndSlowJob();
FailAndExecute();
End();
return;
}
}
Node* pNode = Selected->FindFirst();
NodePath* ThisPath = NULL;
//Document* pDocument = GetWorkingDoc();
while (ok && (pNode != NULL))
{ // we're only interested in NodePaths which have selected points
BOOL DoThisNode = pNode->IsNodePath();
//if (DoThisNode)
// DoThisNode = (((NodePath*)pNode)->InkPath.IsSubSelection());
if (DoThisNode)
DoThisNode = (((NodePath*)pNode)->IsPathAllowable());
if ( DoThisNode )
{
// for convenience, cast the pointer to a pointer to a NodePath
ThisPath = (NodePath*)pNode;
// First get pointers to the arrays
PathVerb* Verbs = NULL;
PathFlags* Flags = NULL;
DocCoord* Coords = NULL;
ThisPath->InkPath.GetPathArrays(&Verbs, &Coords, &Flags);
INT32 NumCoords = ThisPath->InkPath.GetNumCoords();
// BOOL PrevSelected = FALSE;
// INT32 PrevPos = 0;
ObjChangeFlags cFlags;
cFlags.TransformNode = TRUE;
ObjChangeParam ObjChange(OBJCHANGE_STARTING,cFlags,ThisPath,this);
if (!ThisPath->AllowOp(&ObjChange, TRUE))
{
return;
}
// Set the NeedToRender flags
for (INT32 loop = 0; loop < NumCoords; loop++)
{
if (Flags[loop].IsEndPoint && Flags[loop].IsSelected)
Flags[loop].NeedToRender = TRUE;
else
Flags[loop].NeedToRender = FALSE;
}
// Force a re-draw of the place where the path used to be
if (ok)
ok = (RecalcBoundsAction::DoRecalc(this, &UndoActions, ThisPath, TRUE) != AC_FAIL);
DoReversePath (ThisPath);
// Force a redraw of the place where the path is now.
if (ok)
ok = (RecordBoundsAction::DoRecord(this, &UndoActions, ThisPath, TRUE) != AC_FAIL);
}
pNode = Selected->FindNext(pNode);
}
if (ok)
{
ObjChange.Define(OBJCHANGE_FINISHED,cFlags,NULL,this);
if (!UpdateChangedNodes(&ObjChange))
{
FailAndExecute();
End();
return;
}
}
EndSlowJob();
if (!ok)
{
FailAndExecute();
InformError();
}
End();
}
BOOL ViewContextMenu::BuildOverView(Spread* pSpread, DocCoord ClickPos, ClickModifiers ClickMods)
{
ERROR2IF(pSpread==NULL,FALSE,"BuildOverView passed NULL spread pointer");
BOOL ok = TRUE;
//---------------------------------------------//
// First ask selected nodes if they want to supply items and if so show the blob menu...
if (AskBlobsForItems(pSpread, ClickPos, ClickMods))
{
// If they supply items then we won't add the normal items about the selection
return TRUE;
}
//---------------------------------------------//
// Find what the click was on and show the object menu...
// NodeRenderableInk* pHitNode = NodeRenderableInk::FindSimpleAtPoint(pSpread, ClickPos);
NodeRenderableInk* pHitNode = FindNodeAtPoint(pSpread,ClickPos);
if (pHitNode)
{
BOOL HitNodeIsGuideline = IS_A(pHitNode,NodeGuideline);
if (!HitNodeIsGuideline) // BODGE so that guidelines (which can't be selected) can have a pop-up menu
{
// Now find out if there's just one node selected and if so ask it for some items...
SelRange* pSel = GetApplication()->FindSelection();
if (pSel!=NULL)
{
Node* pNode = pSel->FindFirst();
if (pNode && pSel->FindNext(pNode) == NULL)
{
// There's only one object selected so let's ask it about itself...
((NodeRenderableInk*) pNode)->OnNodePopUp(pSpread, ClickPos, this);
}
}
}
else
pHitNode->OnNodePopUp(pSpread, ClickPos, this);
if (!HitNodeIsGuideline) // BODGE to stop guideline pop-up menus having irrelevant menu items
{
// Build the rest of the standard object menu...
// Effect commands
ok = ok && BuildEffectCommands();
// Edit commands
ok = ok && BuildTransferCommands(TRUE);
// Arrange commands
// WEBSTER-ranbirr-13/11/96
// #ifndef WEBSTER
ok = ok && BuildCommand(OPTOKEN_MAKE_SHAPES);
// #endif //webster
ok = ok && BuildCommand(OPTOKEN_CONVERTTOBITMAP);
// WEBSTER-ranbirr-13/11/96
// Now Taken out by vector stroking code Neville 2/10/97
#ifdef VECTOR_STROKING
// ok = ok && BuildCommand(OPTOKEN_MAKE_STROKE);
#endif // VECTOR_STROKING
ok = ok && BuildCommand(OPTOKEN_COMBINESHAPES,TRUE);
MenuItem* pCombineRoot = GetLastItem();
// WEBSTER-ranbirr-13/11/96
// #ifndef WEBSTER
ok = ok && BuildCommand(OPTOKEN_ADDSHAPES, FALSE, pCombineRoot);
ok = ok && BuildCommand(OPTOKEN_SUBTRACTSHAPES, FALSE, pCombineRoot);
ok = ok && BuildCommand(OPTOKEN_INTERSECTSHAPES, FALSE, pCombineRoot);
ok = ok && BuildCommand(OPTOKEN_SLICESHAPES, FALSE, pCombineRoot);
// #endif //webster
#ifndef WEBSTER
// Imagesetting submenu
ok = ok && BuildCommand(OPTOKEN_IMAGESETTING, TRUE);
pCombineRoot = GetLastItem();
ok = ok && BuildCommand(OPTOKEN_OVERPRINTFILL, FALSE, pCombineRoot);
ok = ok && BuildCommand(OPTOKEN_OVERPRINTLINE, TRUE, pCombineRoot);
ok = ok && BuildCommand(OPTOKEN_PRINTONALLPLATES, FALSE, pCombineRoot);
#endif //webster
// Utils commands
ok = ok && BuildCommand(OPTOKEN_WEBADDRESSDLG);
ok = ok && BuildCommand(OPTOKEN_COLOUREDITDLG, TRUE);
PORTNOTE("other", "Removed brush edit dialog from popup menu")
#ifndef EXCLUDE_FROM_XARALX
ok = ok && BuildCommand(OPTOKEN_BRUSHEDIT_DLG);
#endif
ok = ok && BuildCommand(OPTOKEN_SELECTBRUSH);
}
return ok;
}
//---------------------------------------------//
// If on white space then show the white space menu...
// Window commands
// MENUITEM OPTOKEN_TOOLBARDLG
// MENUITEM OPTOKEN_VIEWCOLOURBAR
// MENUITEM OPTOKEN_VIEWSTATUSBAR
// MENUITEM OPTOKEN_VIEWSCROLLBARS
// WEBSTER-ranbirr-13/11/96
#ifndef WEBSTER
ok = ok && BuildCommand(OPTOKEN_WINDOWNEWVIEW);
ok = ok && BuildCommand(OPTOKEN_VIEWFULLSCREEN,TRUE);
#else
ok = ok && BuildCommand(OPTOKEN_WINDOWNEWVIEW,TRUE);
#endif //webster
// Paste option - we don't need to do the
// BuildTransferCommands as the Cut and Copy operations
// are never applicable here... matt-23/08/2000
ok = ok && BuildCommand(OPTOKEN_PASTE, TRUE);
// View quality
ok = ok && BuildCommand(OPTOKEN_WINDOWQUALITY,FALSE);
MenuItem* pQualityRoot = GetLastItem();
ok = ok && BuildCommand(OPTOKEN_QUALITYANTIALIASED, FALSE, pQualityRoot);
ok = ok && BuildCommand(OPTOKEN_QUALITYNORMAL, FALSE, pQualityRoot);
ok = ok && BuildCommand(OPTOKEN_QUALITYSIMPLE, FALSE, pQualityRoot);
ok = ok && BuildCommand(OPTOKEN_QUALITYOUTLINE, FALSE, pQualityRoot);
// View commands
// WEBSTER-ranbirr-13/11/96
#ifndef WEBSTER
ok = ok && BuildCommand(OPTOKEN_SHOWGRID);
ok = ok && BuildCommand(OPTOKEN_SHOWGUIDES,TRUE);
#else
ok = ok && BuildCommand(OPTOKEN_SHOWGRID,TRUE);
#endif //webster
// WEBSTER-ranbirr-13/11/96
#ifndef WEBSTER
ok = ok && BuildCommand(OPTOKEN_SNAPTOGRID);
ok = ok && BuildCommand(OPTOKEN_SNAPTOGUIDES);
ok = ok && BuildCommand(OPTOKEN_SNAPTOOBJECTS,TRUE);
#else
ok = ok && BuildCommand(OPTOKEN_SNAPTOGRID,TRUE);
#endif //webster
ok = ok && BuildCommand(OPTOKEN_DELETEPAGEBACKGROUND);
// Page commands (almost "Properties...")
ok = ok && BuildCommand(OPTOKEN_PAGESIZEDLG);
return ok;
}
/********************************************************************************************
> BOOL MakeBitmapFilter::DoCreateBitmap(Operation *pOp, Document *pDoc, KernelBitmap** ppBitmap)
Author: Will_Cowling (Xara Group Ltd) <*****@*****.**>
Created: 11/6/96
Purpose: Exports the current selection as a bitmap, via the virtual fns of the
inherited class.
Returns: TRUE if worked, FALSE if failed.
SeeAlso: GetExportOptions; PrepareToExport; ExportRenderNodes; CleanUpAfterExport;
********************************************************************************************/
BOOL MakeBitmapFilter::DoCreateBitmap(Operation *pOp, Document *pDoc, KernelBitmap** ppBitmap)
{
ERROR3IF(ppBitmap == NULL, "NULL bitmap pointer passed to MakeBitmapFilter::DoCreateBitmap");
if (ppBitmap == NULL)
return FALSE;
pTheBitmap = NULL;
*ppBitmap = NULL;
// Set the bitmap pointer to null just in case, usually only used by DoExportBitmap
pExportBitmap = NULL;
// Get pointer to the spread to export.
PORTNOTE("spread", "Multi-spread warning!")
pSpread = GetFirstSpread(pDoc);
// remember the document in the class variable
TheDocument = pDoc;
// We must now check if there is a selection present so that we can set up whether the
// user gets the choice of exporting the selection, drawing or spread if there is a
// selection present OR just a choice between the spread or drawing if no selection is
// present.
// If have a caret selected in a text story then the selection will be almost zero so trap
// this case as well.
RangeControl rg = GetApplication()->FindSelection()->GetRangeControlFlags();
rg.PromoteToParent = TRUE;
GetApplication()->FindSelection()->Range::SetRangeControl(rg);
SelRange Rng(*(GetApplication()->FindSelection()));
// now, run through the selection selecting all nodes under all compound nodes
// if we don't do this then all compound nodes aren't rendered correctly with transparent
// bitmaps
Node * pNode = Rng.FindFirst(FALSE);
while (pNode)
{
pNode->SetSelected(FALSE);
pNode->SetSelected(TRUE);
pNode = Rng.FindNext(pNode, FALSE);
}
rg.PromoteToParent = FALSE;
GetApplication()->FindSelection()->Range::SetRangeControl(rg);
GetApplication()->UpdateSelection();
DocRect ClipRect = GetApplication()->FindSelection()->GetBoundingRect();
SelectionType Selection = DRAWING;
if ( ClipRect.IsEmpty() || ClipRect.Width() < MinExportSize ||
ClipRect.Height() < MinExportSize)
Selection = DRAWING; // no selection present, so choose drawing by default
else
Selection = SELECTION; // selection present, so choose this by default
if (Selection != SELECTION)
{
BOOL UseDrawingBounds = TRUE;
SelRange* pSel = GetApplication()->FindSelection();
if (pSel && pSel->Count()==1)
{
// Only one thing selected ... Is it the Text Caret per chance ?
Node* pSelNode = pSel->FindFirst();
if (pSelNode && pSelNode->IsAVisibleTextNode())
{
VisibleTextNode* pTextNode = (VisibleTextNode*)pSelNode;
if (pTextNode->IsACaret())
{
// Aha! It's the Caret that's selected.
// We'll use the bounds of the parent text line instead then ...
Node* pTextLine = pTextNode->FindParent();
ERROR3IF(!IS_A(pTextLine, TextLine), "Caret doesn't have a parent text line in DoCreateBitmap");
// Get the bounds of the text line
ClipRect = ((TextLine*)pTextLine)->GetBoundingRect();
Selection = SELECTION;
UseDrawingBounds = FALSE;
}
}
}
if (UseDrawingBounds)
{
// Work out the size of the rectangle encompassing the drawing (visible layers only)
ClipRect = GetSizeOfDrawing(pSpread);
}
}
// Create somewhere to put the user options and fill them up
MakeBitmapExportOptions* pMakeBmpExportOptions = (MakeBitmapExportOptions*)CreateExportOptions();
if (pMakeBmpExportOptions == NULL)
{
Error::SetError(_R(IDS_OUT_OF_MEMORY));
return FALSE;
}
pMakeBmpExportOptions->RetrieveDefaults();
pMakeBmpExportOptions->SetDepth(32); // create bmp copies shoulda always default to being 32 bit
pMakeBmpExportOptions->SetSelectionType(Selection);
// Set the BaseBitmapFilter member so we can use base class functionality - blurghh
SetExportOptions(pMakeBmpExportOptions);
BOOL ok = GetExportOptions( (BitmapExportOptions*)pMakeBmpExportOptions );
BOOL IsAnimation = BmapPrevDlg::m_pExportOptions == NULL;
BaseBitmapFilter * pNewFilter = this;
BitmapExportOptions * pExportOptions = BmapPrevDlg::m_pExportOptions;
if (!IsAnimation)
{
pNewFilter = pExportOptions->FindBitmapFilterForTheseExportOptions();
// from the exporting point of view we should always have been using png options
// set them to the png options for the export part
if (pNewFilter)
pNewFilter->SetExportOptions(pExportOptions);
// gets the real export options that the prevdlg has set up for us
BmapPrevDlg::m_pExportOptions = NULL; // take responsibility for this data
}
else
{
// the animation export didn't bring up the dlg so never set BmapPrevDlg::m_pExportOptions
// so continue with these options
pExportOptions = (BitmapExportOptions*)pMakeBmpExportOptions;
}
SetExportOptions(pExportOptions);
if (!ok)
{
SetExportOptions(NULL); // deletes the filter ptr and nulls it
delete pExportOptions;
return FALSE; // if cancelled
}
//////////////// SMFIX
pExportOptions->MarkValid();
SetDepthToRender(pExportOptions->GetDepth());
// Set up device context and render region for this export.
// This will show a progress hourglass for the objects being rendered
// THis will now also write the data out to file via our ExportRenderNodes function
if (!PrepareToExport(pSpread, pExportOptions->GetDepth(), pExportOptions->GetDPI(),
pExportOptions->GetSelectionType(), pExportOptions->GetDither()))
{
pNewFilter->SetExportOptions(NULL);
SetExportOptions(NULL);
delete pExportOptions;
CleanUpAfterExport();
return FALSE;
}
RenderInStrips = FALSE;
if (!ExportRender(ExportRegion))
{
pNewFilter->SetExportOptions(NULL); // deletes the filter ptr and nulls it
SetExportOptions(NULL);
delete pExportOptions;
CleanUpAfterExport();
return FALSE;
}
// Now get the converted 32Bit BMP
pTheBitmap = GetTheBitmap(pExportOptions);
// if we`ve got a transparency index AND we`ve got a 32 Bit Render region with alpha channel info
// then we can quickly do
if(pExportOptions->GetDepth() <= 8 && pExportOptions->GetTransparencyIndex() != -1 && pTheBitmap)
{
// What we do now is to go throught the bitmap setting the relavent pixels to transparent
// depending on the alpha channel info held in the 32 bit version.
if(!ApplyTransparentColoursToBitmap(pTheBitmap,pExportOptions))
{
pNewFilter->SetExportOptions(NULL); // deletes the filter ptr and nulls it
return FALSE;
}
// Now make sure the bitmap knows that it has a transparent colour!
pTheBitmap->SetTransparencyIndex(pExportOptions->GetTransparencyIndex());
}
// Set pointer to the bitmap we have created
*ppBitmap = pTheBitmap;
pNewFilter->SetExportOptions(NULL); // deletes the filter ptr and nulls it
SetExportOptions(NULL);
delete pExportOptions;
CleanUpAfterExport();
return *ppBitmap != NULL;
//////////////// SMFIX
}