void updateStreamMessage(void) {
// Initialize Stream Message
String stream_message = "\"GTYP\":\"Stream\",";
// Get Stream Message
stream_message += sensor_water_ph_temperature_ec_default.get();
stream_message += sensor_tsl2561_light_intensity_default.get();
stream_message += sensor_dht22_air_temperature_humidity_default.get(); // does not work on 1.0
stream_message += sensor_gc0011_air_co2_temperature_humidity_default.get();
stream_message += actuator_relay_air_heater_default.get();
stream_message += actuator_relay_air_humidifier_default.get();
stream_message += actuator_relay_air_vent_default.get();
stream_message += actuator_relay_air_circulation_default.get();
stream_message += chamber_illumination_default.get();
stream_message += dose_pump1_default.get();
stream_message += dose_pump2_default.get();
stream_message += dose_pump3_default.get();
stream_message += dose_pump4_default.get();
stream_message += actuator_relay_airpump_default.get();
stream_message += actuator_relay_co2_default.get();
stream_message += actuator_relay_watercir_default.get();
stream_message += actuator_relay_coolvalve_default.get();
// Return Stream Message
stream_message += "\"GEND\":0";
// Send Stream Message
communication.send(stream_message);
}
String handleIncomingMessage(void) {
// Parse Message into: Instruction Code - ID - Parameter
String return_message = "";
String incoming_message = communication.receive();
Instruction instruction = parseIncomingMessage(incoming_message);
// Pass Parsed Message To All Objects and Update Return Message if Applicable
if (instruction.valid) {
return_message += sensor_water_ph_temperature_ec_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_tsl2561_light_intensity_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_dht22_air_temperature_humidity_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_gc0011_air_co2_temperature_humidity_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_heater_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_humidifier_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_vent_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_circulation_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += chamber_illumination_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += dose_pump1_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += dose_pump2_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += dose_pump3_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += dose_pump4_default.set(instruction.code, instruction.id, instruction.parameter);
}
return return_message;
}
void updateStreamMessage(void) {
// Initialize Stream Message
String stream_message = "\"GTYP\":\"Stream\",";
// Get Stream Message
//stream_message += sensor_dfr01610300_water_ph_temperature_ec_default.get();
stream_message += sensor_venier_ph_default.get();
stream_message += sensor_vernier_ec_default.get();
stream_message += sensor_ds18b20_water_temperature.get();
stream_message += sensor_tsl2561_light_intensity_default.get();
stream_message += sensor_dht22_air_temperature_humidity_default.get(); // does not work on 1.0
stream_message += sensor_gc0011_air_co2_temperature_humidity_default.get();
stream_message += sensor_contact_switch_general_shell_open_default.get();
stream_message += sensor_contact_switch_general_window_open_default.get();
stream_message += actuator_relay_air_heater_default.get();
stream_message += actuator_relay_air_humidifier_default.get();
stream_message += actuator_relay_air_vent_default.get();
stream_message += actuator_relay_air_circulation_default.get();
stream_message += actuator_relay_light_panel_default.get();
stream_message += actuator_relay_light_chamber_illumination_default.get();
stream_message += actuator_relay_light_motherboard_illumination_default.get();
// Return Stream Message
stream_message += "\"GEND\":0";
// Send Stream Message
communication.send(stream_message);
}
String handleIncomingMessage(void) {
// Parse Message into: Instruction Code - ID - Parameter
String return_message = "";
String incoming_message = communication.receive();
Instruction instruction = parseIncomingMessage(incoming_message);
// Pass Parsed Message To All Objects and Update Return Message if Applicable
if (instruction.valid) {
//return_message += sensor_dfr01610300_water_ph_temperature_ec_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_venier_ph_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_vernier_ec_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_ds18b20_water_temperature.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_tsl2561_light_intensity_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_dht22_air_temperature_humidity_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_gc0011_air_co2_temperature_humidity_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_contact_switch_general_shell_open_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += sensor_contact_switch_general_window_open_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_heater_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_humidifier_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_vent_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_air_circulation_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_light_panel_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_light_chamber_illumination_default.set(instruction.code, instruction.id, instruction.parameter);
return_message += actuator_relay_light_motherboard_illumination_default.set(instruction.code, instruction.id, instruction.parameter);
}
return return_message;
}
void initializeModules(void) {
EE_Address = 0;
communication.begin();
sensor_water_ph_temperature_ec_default.begin();
sensor_tsl2561_light_intensity_default.begin();
sensor_dht22_air_temperature_humidity_default.begin();
sensor_gc0011_air_co2_temperature_humidity_default.begin();
actuator_relay_air_heater_default.begin();
chamber_illumination_default.begin();
actuator_relay_air_humidifier_default.begin();
actuator_relay_air_vent_default.begin();
actuator_relay_air_circulation_default.begin();
dose_pump1_default.begin();
dose_pump2_default.begin();
dose_pump3_default.begin();
dose_pump4_default.begin();
actuator_relay_airpump_default.begin();
actuator_relay_co2_default.begin();
actuator_relay_watercir_default.begin();
actuator_relay_coolvalve_default.begin();
// Set Default States
actuator_relay_air_circulation_default.set("AACR", 1, "1");
actuator_relay_air_vent_default.set("AAVE", 1, "1");
chamber_illumination_default.set("AWHI", 1, "0");
chamber_illumination_default.set("AUVI", 1, "0");
chamber_illumination_default.set("ARGB", 1, "0,0,0");
dose_pump1_default.set("ADSP", 1, "0");
dose_pump2_default.set("ADSP", 2, "0");
dose_pump3_default.set("ADSP", 3, "0");
dose_pump4_default.set("ADSP", 4, "0");
actuator_relay_airpump_default.set("AAPR", 1, "0");
actuator_relay_co2_default.set("ACOR", 1, "0");
actuator_relay_watercir_default.set("AWCR", 1, "1");
actuator_relay_coolvalve_default.set("AAPR", 1, "1");
}
void initializeModules(void) {
communication.begin();
//sensor_dfr01610300_water_ph_temperature_ec_default.begin();
sensor_venier_ph_default.begin();
sensor_vernier_ec_default.begin();
sensor_ds18b20_water_temperature.begin();
sensor_tsl2561_light_intensity_default.begin();
sensor_dht22_air_temperature_humidity_default.begin();
sensor_gc0011_air_co2_temperature_humidity_default.begin();
sensor_contact_switch_general_shell_open_default.begin();
sensor_contact_switch_general_window_open_default.begin();
actuator_relay_air_heater_default.begin();
actuator_relay_air_humidifier_default.begin();
actuator_relay_air_vent_default.begin();
actuator_relay_air_circulation_default.begin();
actuator_relay_light_panel_default.begin();
actuator_relay_light_chamber_illumination_default.begin();
actuator_relay_light_motherboard_illumination_default.begin();
// Set Default States
actuator_relay_air_circulation_default.set("AACR", 1, "1");
actuator_relay_light_motherboard_illumination_default.set("ALMI", 1, "1");
actuator_relay_air_vent_default.set("AAVE", 1, "1");
}
