void SyncWheels()
{
int numWheels = GetNumWheels();
int i;
for (i=0;i<numWheels;i++)
{
WheelInfo& info = m_vehicle->GetWheelInfo(i);
PHY_IMotionState* motionState = (PHY_IMotionState*)info.m_clientInfo ;
m_vehicle->UpdateWheelTransform(i);
SimdTransform trans = m_vehicle->GetWheelTransformWS(i);
SimdQuaternion orn = trans.getRotation();
const SimdVector3& pos = trans.getOrigin();
motionState->setWorldOrientation(orn.x(),orn.y(),orn.z(),orn[3]);
motionState->setWorldPosition(pos.x(),pos.y(),pos.z());
}
}
int main(int argc,char** argv)
{
CollisionDispatcher* dispatcher = new CollisionDispatcher();
SimdVector3 worldAabbMin(-10000,-10000,-10000);
SimdVector3 worldAabbMax(10000,10000,10000);
BroadphaseInterface* broadphase = new AxisSweep3(worldAabbMin,worldAabbMax);
//BroadphaseInterface* broadphase = new SimpleBroadphase();
physicsEnvironmentPtr = new CcdPhysicsEnvironment(dispatcher,broadphase);
physicsEnvironmentPtr->setDeactivationTime(2.f);
physicsEnvironmentPtr->setGravity(0,-10,0);
PHY_ShapeProps shapeProps;
shapeProps.m_do_anisotropic = false;
shapeProps.m_do_fh = false;
shapeProps.m_do_rot_fh = false;
shapeProps.m_friction_scaling[0] = 1.;
shapeProps.m_friction_scaling[1] = 1.;
shapeProps.m_friction_scaling[2] = 1.;
shapeProps.m_inertia = 1.f;
shapeProps.m_lin_drag = 0.2f;
shapeProps.m_ang_drag = 0.1f;
shapeProps.m_mass = 10.0f;
PHY_MaterialProps materialProps;
materialProps.m_friction = 10.5f;
materialProps.m_restitution = 0.0f;
CcdConstructionInfo ccdObjectCi;
ccdObjectCi.m_friction = 0.5f;
ccdObjectCi.m_linearDamping = shapeProps.m_lin_drag;
ccdObjectCi.m_angularDamping = shapeProps.m_ang_drag;
SimdTransform tr;
tr.setIdentity();
int i;
for (i=0;i<numObjects;i++)
{
if (i>0)
{
shapeIndex[i] = 1;//sphere
}
else
shapeIndex[i] = 0;
}
for (i=0;i<numObjects;i++)
{
shapeProps.m_shape = shapePtr[shapeIndex[i]];
shapeProps.m_shape->SetMargin(0.05f);
bool isDyna = i>0;
//if (i==1)
// isDyna=false;
if (0)//i==1)
{
SimdQuaternion orn(0,0,0.1*SIMD_HALF_PI);
ms[i].setWorldOrientation(orn.x(),orn.y(),orn.z(),orn[3]);
}
if (i>0)
{
switch (i)
{
case 1:
{
ms[i].setWorldPosition(0,10,0);
//for testing, rotate the ground cube so the stack has to recover a bit
break;
}
case 2:
{
ms[i].setWorldPosition(0,8,2);
break;
}
default:
ms[i].setWorldPosition(0,i*CUBE_HALF_EXTENTS*2 - CUBE_HALF_EXTENTS,0);
}
float quatIma0,quatIma1,quatIma2,quatReal;
SimdQuaternion quat;
SimdVector3 axis(0,0,1);
SimdScalar angle=0.5f;
quat.setRotation(axis,angle);
ms[i].setWorldOrientation(quat.getX(),quat.getY(),quat.getZ(),quat[3]);
} else
{
ms[i].setWorldPosition(0,-10+EXTRA_HEIGHT,0);
}
ccdObjectCi.m_MotionState = &ms[i];
ccdObjectCi.m_gravity = SimdVector3(0,0,0);
ccdObjectCi.m_localInertiaTensor =SimdVector3(0,0,0);
if (!isDyna)
{
shapeProps.m_mass = 0.f;
ccdObjectCi.m_mass = shapeProps.m_mass;
ccdObjectCi.m_collisionFlags = CollisionObject::isStatic;
}
else
{
shapeProps.m_mass = 1.f;
ccdObjectCi.m_mass = shapeProps.m_mass;
ccdObjectCi.m_collisionFlags = 0;
}
SimdVector3 localInertia;
if (shapePtr[shapeIndex[i]]->GetShapeType() == EMPTY_SHAPE_PROXYTYPE)
{
//take inertia from first shape
shapePtr[1]->CalculateLocalInertia(shapeProps.m_mass,localInertia);
} else
{
shapePtr[shapeIndex[i]]->CalculateLocalInertia(shapeProps.m_mass,localInertia);
}
ccdObjectCi.m_localInertiaTensor = localInertia;
ccdObjectCi.m_collisionShape = shapePtr[shapeIndex[i]];
physObjects[i]= new CcdPhysicsController( ccdObjectCi);
// Only do CCD if motion in one timestep (1.f/60.f) exceeds CUBE_HALF_EXTENTS
physObjects[i]->GetRigidBody()->m_ccdSquareMotionTreshold = CUBE_HALF_EXTENTS;
//Experimental: better estimation of CCD Time of Impact:
//physObjects[i]->GetRigidBody()->m_ccdSweptShereRadius = 0.5*CUBE_HALF_EXTENTS;
physicsEnvironmentPtr->addCcdPhysicsController( physObjects[i]);
if (i==1)
{
//physObjects[i]->SetAngularVelocity(0,0,-2,true);
}
physicsEnvironmentPtr->setDebugDrawer(&debugDrawer);
}
clientResetScene();
{
//physObjects[i]->SetAngularVelocity(0,0,-2,true);
int constraintId;
float pivotX=CUBE_HALF_EXTENTS,
pivotY=CUBE_HALF_EXTENTS,
pivotZ=CUBE_HALF_EXTENTS;
float axisX=0,axisY=1,axisZ=0;
constraintId =physicsEnvironmentPtr->createConstraint(
physObjects[1],
//0,
physObjects[2],
////PHY_POINT2POINT_CONSTRAINT,
PHY_GENERIC_6DOF_CONSTRAINT,//can leave any of the 6 degree of freedom 'free' or 'locked'
//PHY_LINEHINGE_CONSTRAINT,
pivotX,pivotY,pivotZ,
axisX,axisY,axisZ
);
}
setCameraDistance(26.f);
return glutmain(argc, argv,640,480,"Bullet Physics Demo. http://www.continuousphysics.com/Bullet/phpBB2/");
}
void Raytracer::displayCallback()
{
updateCamera();
for (int i=0;i<numObjects;i++)
{
transforms[i].setIdentity();
SimdVector3 pos(-3.5f+i*2.5f,0.f,0.f);
transforms[i].setOrigin( pos );
SimdQuaternion orn;
if (i < 2)
{
orn.setEuler(yaw,pitch,roll);
transforms[i].setRotation(orn);
}
}
myMink.SetTransformA(SimdTransform(transforms[0].getRotation()));
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glDisable(GL_LIGHTING);
if (once)
{
glGenTextures(1, &glTextureId);
glBindTexture(GL_TEXTURE_2D,glTextureId );
once = 0;
glPixelStorei(GL_UNPACK_ALIGNMENT, 1);
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP);
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP);
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
}
glDisable(GL_TEXTURE_2D);
glDisable(GL_BLEND);
#define RAYTRACER
#ifdef RAYTRACER
SimdVector4 rgba(1.f,0.f,0.f,0.5f);
float top = 1.f;
float bottom = -1.f;
float nearPlane = 1.f;
float tanFov = (top-bottom)*0.5f / nearPlane;
float fov = 2.0 * atanf (tanFov);
SimdVector3 rayFrom = getCameraPosition();
SimdVector3 rayForward = getCameraTargetPosition()-getCameraPosition();
rayForward.normalize();
float farPlane = 600.f;
rayForward*= farPlane;
SimdVector3 rightOffset;
SimdVector3 vertical(0.f,1.f,0.f);
SimdVector3 hor;
hor = rayForward.cross(vertical);
hor.normalize();
vertical = hor.cross(rayForward);
vertical.normalize();
float tanfov = tanf(0.5f*fov);
hor *= 2.f * farPlane * tanfov;
vertical *= 2.f * farPlane * tanfov;
SimdVector3 rayToCenter = rayFrom + rayForward;
SimdVector3 dHor = hor * 1.f/float(screenWidth);
SimdVector3 dVert = vertical * 1.f/float(screenHeight);
SimdTransform rayFromTrans;
rayFromTrans.setIdentity();
rayFromTrans.setOrigin(rayFrom);
SimdTransform rayFromLocal;
SimdTransform rayToLocal;
SphereShape pointShape(0.0f);
///clear texture
for (int x=0;x<screenWidth;x++)
{
for (int y=0;y<screenHeight;y++)
{
SimdVector4 rgba(0.f,0.f,0.f,0.f);
raytracePicture->SetPixel(x,y,rgba);
}
}
ConvexCast::CastResult rayResult;
SimdTransform rayToTrans;
rayToTrans.setIdentity();
SimdVector3 rayTo;
for (int x=0;x<screenWidth;x++)
{
for (int y=0;y<screenHeight;y++)
{
rayTo = rayToCenter - 0.5f * hor + 0.5f * vertical;
rayTo += x * dHor;
rayTo -= y * dVert;
rayToTrans.setOrigin(rayTo);
for (int s=0;s<numObjects;s++)
{
// rayFromLocal = transforms[s].inverse()* rayFromTrans;
// rayToLocal = transforms[s].inverse()* rayToTrans;
//choose the continuous collision detection method
SubsimplexConvexCast convexCaster(&pointShape,shapePtr[s],&simplexSolver);
//GjkConvexCast convexCaster(&pointShape,shapePtr[0],&simplexSolver);
//ContinuousConvexCollision convexCaster(&pointShape,shapePtr[0],&simplexSolver,0);
// BU_Simplex1to4 ptShape(SimdVector3(0,0,0));//algebraic needs features, doesnt use 'supporting vertex'
// BU_CollisionPair convexCaster(&ptShape,shapePtr[0]);
//reset previous result
rayResult.m_fraction = 1.f;
if (convexCaster.calcTimeOfImpact(rayFromTrans,rayToTrans,transforms[s],transforms[s],rayResult))
{
//float fog = 1.f - 0.1f * rayResult.m_fraction;
rayResult.m_normal.normalize();
SimdVector3 worldNormal;
worldNormal = transforms[s].getBasis() *rayResult.m_normal;
float light = worldNormal.dot(SimdVector3(0.4f,-1.f,-0.4f));
if (light < 0.2f)
light = 0.2f;
if (light > 1.f)
light = 1.f;
rgba = SimdVector4(light,light,light,1.f);
raytracePicture->SetPixel(x,y,rgba);
} else
{
//clear is already done
//rgba = SimdVector4(0.f,0.f,0.f,0.f);
//raytracePicture->SetPixel(x,y,rgba);
}
}
}
}
#define TEST_PRINTF
#ifdef TEST_PRINTF
extern BMF_FontData BMF_font_helv10;
raytracePicture->Printf("CCD RAYTRACER",&BMF_font_helv10);
char buffer[256];
sprintf(buffer,"%d RAYS / Frame",screenWidth*screenHeight*numObjects);
raytracePicture->Printf(buffer,&BMF_font_helv10,0,10);
#endif //TEST_PRINTF
glMatrixMode(GL_PROJECTION);
glPushMatrix();
glLoadIdentity();
glFrustum(-1.0,1.0,-1.0,1.0,3,2020.0);
glMatrixMode(GL_MODELVIEW);
glPushMatrix();
glLoadIdentity(); // Reset The Modelview Matrix
glTranslatef(0.0f,0.0f,-3.0f); // Move Into The Screen 5 Units
glEnable(GL_TEXTURE_2D);
glBindTexture(GL_TEXTURE_2D,glTextureId );
const unsigned char *ptr = raytracePicture->GetBuffer();
glTexImage2D(GL_TEXTURE_2D,
0,
GL_RGBA,
raytracePicture->GetWidth(),raytracePicture->GetHeight(),
0,
GL_RGBA,
GL_UNSIGNED_BYTE,
ptr);
glEnable (GL_BLEND);
glBlendFunc (GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
glColor4f (1,1,1,1); // alpha=0.5=half visible
glBegin(GL_QUADS);
glTexCoord2f(0.0f, 0.0f);
glVertex2f(-1,1);
glTexCoord2f(1.0f, 0.0f);
glVertex2f(1,1);
glTexCoord2f(1.0f, 1.0f);
glVertex2f(1,-1);
glTexCoord2f(0.0f, 1.0f);
glVertex2f(-1,-1);
glEnd();
glMatrixMode(GL_MODELVIEW);
glPopMatrix();
glMatrixMode(GL_PROJECTION);
glPopMatrix();
glMatrixMode(GL_MODELVIEW);
#endif //RAYRACER
glDisable(GL_TEXTURE_2D);
glDisable(GL_DEPTH_TEST);
GL_ShapeDrawer::DrawCoordSystem();
glPushMatrix();
/*
/// normal opengl rendering
float m[16];
int i;
for (i=0;i<numObjects;i++)
{
transA.getOpenGLMatrix( m );
/// draw the simplex
GL_ShapeDrawer::DrawOpenGL(m,shapePtr[i],SimdVector3(1,1,1));
/// calculate closest point from simplex to the origin, and draw this vector
simplex.CalcClosest(m);
}
*/
glPopMatrix();
pitch += 0.005f;
yaw += 0.01f;
glFlush();
glutSwapBuffers();
}
void LinearConvexCastDemo::displayCallback(void)
{
updateCamera();
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glDisable(GL_LIGHTING);
//GL_ShapeDrawer::DrawCoordSystem();
float m[16];
int i;
for (i=0;i<numObjects;i++)
{
tr[i].getOpenGLMatrix( m );
GL_ShapeDrawer::DrawOpenGL(m,shapePtr[i],SimdVector3(1,1,1),getDebugMode());
}
int shapeIndex = 1;
SimdQuaternion orn;
orn.setEuler(yaw,pitch,roll);
tr[shapeIndex].setRotation(orn);
if (m_stepping || m_singleStep)
{
m_singleStep = false;
pitch += 0.005f;
yaw += 0.01f;
}
SimdVector3 fromA(-25,11,0);
SimdVector3 toA(15,11,0);
SimdQuaternion ornFromA(0.f,0.f,0.f,1.f);
SimdQuaternion ornToA(0.f,0.f,0.f,1.f);
SimdTransform rayFromWorld(ornFromA,fromA);
SimdTransform rayToWorld(ornToA,toA);
tr[0] = rayFromWorld;
if (drawLine)
{
glBegin(GL_LINES);
glColor3f(0, 0, 1);
glVertex3d(rayFromWorld.getOrigin().x(), rayFromWorld.getOrigin().y(),rayFromWorld.getOrigin().z());
glVertex3d(rayToWorld.getOrigin().x(),rayToWorld.getOrigin().y(),rayToWorld.getOrigin().z());
glEnd();
}
//now perform a raycast on the shapes, in local (shape) space
//choose one of the following lines
for (i=1;i<numObjects;i++)
{
ContinuousConvexCollision convexCaster0(shapePtr[0],shapePtr[i],&gGjkSimplexSolver,0);
GjkConvexCast convexCaster1(shapePtr[0],shapePtr[i],&gGjkSimplexSolver);
//BU_CollisionPair (algebraic version) is currently broken, will look into this
//BU_CollisionPair convexCaster2(shapePtr[0],shapePtr[i]);
SubsimplexConvexCast convexCaster3(shapePtr[0],shapePtr[i],&gGjkSimplexSolver);
gGjkSimplexSolver.reset();
ConvexCast::CastResult rayResult;
if (convexCaster3.calcTimeOfImpact(rayFromWorld,rayToWorld,tr[i],tr[i],rayResult))
{
glDisable(GL_DEPTH_TEST);
SimdVector3 hitPoint;
hitPoint.setInterpolate3(rayFromWorld.getOrigin(),rayToWorld.getOrigin(),rayResult.m_fraction);
//draw the raycast result
glBegin(GL_LINES);
glColor3f(1, 1, 1);
glVertex3d(rayFromWorld.getOrigin().x(), rayFromWorld.getOrigin().y(),rayFromWorld.getOrigin().z());
glVertex3d(hitPoint.x(),hitPoint.y(),hitPoint.z());
glEnd();
glEnable(GL_DEPTH_TEST);
SimdTransform toTransWorld;
toTransWorld = tr[0];
toTransWorld.setOrigin(hitPoint);
toTransWorld.getOpenGLMatrix( m );
GL_ShapeDrawer::DrawOpenGL(m,shapePtr[0],SimdVector3(0,1,1),getDebugMode());
}
}
glFlush();
glutSwapBuffers();
}
int main(int argc,char** argv)
{
int i;
for (i=0;i<numObjects;i++)
{
if (i>0)
{
shapePtr[i] = prebuildShapePtr[1];
shapeIndex[i] = 1;//sphere
}
else
{
shapeIndex[i] = 0;
shapePtr[i] = prebuildShapePtr[0];
}
}
ConvexDecomposition::WavefrontObj wo;
char* filename = "file.obj";
tcount = wo.loadObj(filename);
class MyConvexDecomposition : public ConvexDecomposition::ConvexDecompInterface
{
public:
MyConvexDecomposition (FILE* outputFile)
:mBaseCount(0),
mHullCount(0),
mOutputFile(outputFile)
{
}
virtual void ConvexDecompResult(ConvexDecomposition::ConvexResult &result)
{
TriangleMesh* trimesh = new TriangleMesh();
SimdVector3 localScaling(6.f,6.f,6.f);
//export data to .obj
printf("ConvexResult\n");
if (mOutputFile)
{
fprintf(mOutputFile,"## Hull Piece %d with %d vertices and %d triangles.\r\n", mHullCount, result.mHullVcount, result.mHullTcount );
fprintf(mOutputFile,"usemtl Material%i\r\n",mBaseCount);
fprintf(mOutputFile,"o Object%i\r\n",mBaseCount);
for (unsigned int i=0; i<result.mHullVcount; i++)
{
const float *p = &result.mHullVertices[i*3];
fprintf(mOutputFile,"v %0.9f %0.9f %0.9f\r\n", p[0], p[1], p[2] );
}
//calc centroid, to shift vertices around center of mass
centroids[numObjects] = SimdVector3(0,0,0);
if ( 1 )
{
const unsigned int *src = result.mHullIndices;
for (unsigned int i=0; i<result.mHullTcount; i++)
{
unsigned int index0 = *src++;
unsigned int index1 = *src++;
unsigned int index2 = *src++;
SimdVector3 vertex0(result.mHullVertices[index0*3], result.mHullVertices[index0*3+1],result.mHullVertices[index0*3+2]);
SimdVector3 vertex1(result.mHullVertices[index1*3], result.mHullVertices[index1*3+1],result.mHullVertices[index1*3+2]);
SimdVector3 vertex2(result.mHullVertices[index2*3], result.mHullVertices[index2*3+1],result.mHullVertices[index2*3+2]);
vertex0 *= localScaling;
vertex1 *= localScaling;
vertex2 *= localScaling;
centroids[numObjects] += vertex0;
centroids[numObjects]+= vertex1;
centroids[numObjects]+= vertex2;
}
}
centroids[numObjects] *= 1.f/(float(result.mHullTcount) * 3);
if ( 1 )
{
const unsigned int *src = result.mHullIndices;
for (unsigned int i=0; i<result.mHullTcount; i++)
{
unsigned int index0 = *src++;
unsigned int index1 = *src++;
unsigned int index2 = *src++;
SimdVector3 vertex0(result.mHullVertices[index0*3], result.mHullVertices[index0*3+1],result.mHullVertices[index0*3+2]);
SimdVector3 vertex1(result.mHullVertices[index1*3], result.mHullVertices[index1*3+1],result.mHullVertices[index1*3+2]);
SimdVector3 vertex2(result.mHullVertices[index2*3], result.mHullVertices[index2*3+1],result.mHullVertices[index2*3+2]);
vertex0 *= localScaling;
vertex1 *= localScaling;
vertex2 *= localScaling;
vertex0 -= centroids[numObjects];
vertex1 -= centroids[numObjects];
vertex2 -= centroids[numObjects];
trimesh->AddTriangle(vertex0,vertex1,vertex2);
index0+=mBaseCount;
index1+=mBaseCount;
index2+=mBaseCount;
fprintf(mOutputFile,"f %d %d %d\r\n", index0+1, index1+1, index2+1 );
}
}
shapeIndex[numObjects] = numObjects;
shapePtr[numObjects++] = new ConvexTriangleMeshShape(trimesh);
mBaseCount+=result.mHullVcount; // advance the 'base index' counter.
}
}
int mBaseCount;
int mHullCount;
FILE* mOutputFile;
};
if (tcount)
{
numObjects = 1; //always have the ground object first
TriangleMesh* trimesh = new TriangleMesh();
SimdVector3 localScaling(6.f,6.f,6.f);
for (int i=0;i<wo.mTriCount;i++)
{
int index0 = wo.mIndices[i*3];
int index1 = wo.mIndices[i*3+1];
int index2 = wo.mIndices[i*3+2];
SimdVector3 vertex0(wo.mVertices[index0*3], wo.mVertices[index0*3+1],wo.mVertices[index0*3+2]);
SimdVector3 vertex1(wo.mVertices[index1*3], wo.mVertices[index1*3+1],wo.mVertices[index1*3+2]);
SimdVector3 vertex2(wo.mVertices[index2*3], wo.mVertices[index2*3+1],wo.mVertices[index2*3+2]);
vertex0 *= localScaling;
vertex1 *= localScaling;
vertex2 *= localScaling;
trimesh->AddTriangle(vertex0,vertex1,vertex2);
}
shapePtr[numObjects++] = new ConvexTriangleMeshShape(trimesh);
}
if (tcount)
{
char outputFileName[512];
strcpy(outputFileName,filename);
char *dot = strstr(outputFileName,".");
if ( dot )
*dot = 0;
strcat(outputFileName,"_convex.obj");
FILE* outputFile = fopen(outputFileName,"wb");
unsigned int depth = 7;
float cpercent = 5;
float ppercent = 15;
unsigned int maxv = 16;
float skinWidth = 0.01;
printf("WavefrontObj num triangles read %i",tcount);
ConvexDecomposition::DecompDesc desc;
desc.mVcount = wo.mVertexCount;
desc.mVertices = wo.mVertices;
desc.mTcount = wo.mTriCount;
desc.mIndices = (unsigned int *)wo.mIndices;
desc.mDepth = depth;
desc.mCpercent = cpercent;
desc.mPpercent = ppercent;
desc.mMaxVertices = maxv;
desc.mSkinWidth = skinWidth;
MyConvexDecomposition convexDecomposition(outputFile);
desc.mCallback = &convexDecomposition;
//convexDecomposition.performConvexDecomposition(desc);
ConvexBuilder cb(desc.mCallback);
int ret = cb.process(desc);
if (outputFile)
fclose(outputFile);
}
CollisionDispatcher* dispatcher = new CollisionDispatcher();
SimdVector3 worldAabbMin(-10000,-10000,-10000);
SimdVector3 worldAabbMax(10000,10000,10000);
OverlappingPairCache* broadphase = new AxisSweep3(worldAabbMin,worldAabbMax);
//OverlappingPairCache* broadphase = new SimpleBroadphase();
physicsEnvironmentPtr = new CcdPhysicsEnvironment(dispatcher,broadphase);
physicsEnvironmentPtr->setDeactivationTime(2.f);
physicsEnvironmentPtr->setGravity(0,-10,0);
PHY_ShapeProps shapeProps;
shapeProps.m_do_anisotropic = false;
shapeProps.m_do_fh = false;
shapeProps.m_do_rot_fh = false;
shapeProps.m_friction_scaling[0] = 1.;
shapeProps.m_friction_scaling[1] = 1.;
shapeProps.m_friction_scaling[2] = 1.;
shapeProps.m_inertia = 1.f;
shapeProps.m_lin_drag = 0.2f;
shapeProps.m_ang_drag = 0.1f;
shapeProps.m_mass = 10.0f;
PHY_MaterialProps materialProps;
materialProps.m_friction = 10.5f;
materialProps.m_restitution = 0.0f;
CcdConstructionInfo ccdObjectCi;
ccdObjectCi.m_friction = 0.5f;
ccdObjectCi.m_linearDamping = shapeProps.m_lin_drag;
ccdObjectCi.m_angularDamping = shapeProps.m_ang_drag;
SimdTransform tr;
tr.setIdentity();
for (i=0;i<numObjects;i++)
{
shapeProps.m_shape = shapePtr[shapeIndex[i]];
shapeProps.m_shape->SetMargin(0.05f);
bool isDyna = i>0;
//if (i==1)
// isDyna=false;
if (0)//i==1)
{
SimdQuaternion orn(0,0,0.1*SIMD_HALF_PI);
ms[i].setWorldOrientation(orn.x(),orn.y(),orn.z(),orn[3]);
}
if (i>0)
{
switch (i)
{
case 1:
{
ms[i].setWorldPosition(0,10,0);
//for testing, rotate the ground cube so the stack has to recover a bit
break;
}
case 2:
{
ms[i].setWorldPosition(0,8,2);
break;
}
default:
ms[i].setWorldPosition(0,i*CUBE_HALF_EXTENTS*2 - CUBE_HALF_EXTENTS,0);
}
float quatIma0,quatIma1,quatIma2,quatReal;
SimdQuaternion quat;
SimdVector3 axis(0,0,1);
SimdScalar angle=0.5f;
quat.setRotation(axis,angle);
ms[i].setWorldOrientation(quat.getX(),quat.getY(),quat.getZ(),quat[3]);
} else
{
ms[i].setWorldPosition(0,-10+EXTRA_HEIGHT,0);
}
ccdObjectCi.m_MotionState = &ms[i];
ccdObjectCi.m_gravity = SimdVector3(0,0,0);
ccdObjectCi.m_localInertiaTensor =SimdVector3(0,0,0);
if (!isDyna)
{
shapeProps.m_mass = 0.f;
ccdObjectCi.m_mass = shapeProps.m_mass;
ccdObjectCi.m_collisionFlags = CollisionObject::isStatic;
}
else
{
shapeProps.m_mass = 1.f;
ccdObjectCi.m_mass = shapeProps.m_mass;
ccdObjectCi.m_collisionFlags = 0;
}
SimdVector3 localInertia;
if (shapePtr[shapeIndex[i]]->GetShapeType() == EMPTY_SHAPE_PROXYTYPE)
{
//take inertia from first shape
shapePtr[1]->CalculateLocalInertia(shapeProps.m_mass,localInertia);
} else
{
shapePtr[shapeIndex[i]]->CalculateLocalInertia(shapeProps.m_mass,localInertia);
}
ccdObjectCi.m_localInertiaTensor = localInertia;
ccdObjectCi.m_collisionShape = shapePtr[shapeIndex[i]];
physObjects[i]= new CcdPhysicsController( ccdObjectCi);
// Only do CCD if motion in one timestep (1.f/60.f) exceeds CUBE_HALF_EXTENTS
physObjects[i]->GetRigidBody()->m_ccdSquareMotionTreshold = CUBE_HALF_EXTENTS;
//Experimental: better estimation of CCD Time of Impact:
//physObjects[i]->GetRigidBody()->m_ccdSweptShereRadius = 0.5*CUBE_HALF_EXTENTS;
physicsEnvironmentPtr->addCcdPhysicsController( physObjects[i]);
if (i==1)
{
//physObjects[i]->SetAngularVelocity(0,0,-2,true);
}
physicsEnvironmentPtr->setDebugDrawer(&debugDrawer);
}
//create a constraint
if (createConstraint)
{
//physObjects[i]->SetAngularVelocity(0,0,-2,true);
int constraintId;
float pivotX=CUBE_HALF_EXTENTS,
pivotY=-CUBE_HALF_EXTENTS,
pivotZ=CUBE_HALF_EXTENTS;
float axisX=1,axisY=0,axisZ=0;
HingeConstraint* hinge = 0;
SimdVector3 pivotInA(CUBE_HALF_EXTENTS,-CUBE_HALF_EXTENTS,CUBE_HALF_EXTENTS);
SimdVector3 pivotInB(-CUBE_HALF_EXTENTS,-CUBE_HALF_EXTENTS,CUBE_HALF_EXTENTS);
SimdVector3 axisInA(0,1,0);
SimdVector3 axisInB(0,-1,0);
RigidBody* rb0 = physObjects[1]->GetRigidBody();
RigidBody* rb1 = physObjects[2]->GetRigidBody();
hinge = new HingeConstraint(
*rb0,
*rb1,pivotInA,pivotInB,axisInA,axisInB);
physicsEnvironmentPtr->m_constraints.push_back(hinge);
hinge->SetUserConstraintId(100);
hinge->SetUserConstraintType(PHY_LINEHINGE_CONSTRAINT);
}
clientResetScene();
setCameraDistance(26.f);
return glutmain(argc, argv,640,480,"Bullet Physics Demo. http://www.continuousphysics.com/Bullet/phpBB2/");
}
bool BU_CollisionPair::calcTimeOfImpact(
const SimdTransform& fromA,
const SimdTransform& toA,
const SimdTransform& fromB,
const SimdTransform& toB,
CastResult& result)
{
SimdVector3 linvelA,angvelA;
SimdVector3 linvelB,angvelB;
SimdTransformUtil::CalculateVelocity(fromA,toA,1.f,linvelA,angvelA);
SimdTransformUtil::CalculateVelocity(fromB,toB,1.f,linvelB,angvelB);
SimdVector3 linearMotionA = toA.getOrigin() - fromA.getOrigin();
SimdQuaternion angularMotionA(0,0,0,1.f);
SimdVector3 linearMotionB = toB.getOrigin() - fromB.getOrigin();
SimdQuaternion angularMotionB(0,0,0,1);
result.m_fraction = 1.f;
SimdTransform impactTransA;
SimdTransform impactTransB;
int index=0;
SimdScalar toiUnscaled=result.m_fraction;
const SimdScalar toiUnscaledLimit = result.m_fraction;
SimdTransform a2w;
a2w = fromA;
SimdTransform b2w = fromB;
/* debugging code
{
const int numvertsB = m_convexB->GetNumVertices();
for (int v=0;v<numvertsB;v++)
{
SimdPoint3 pt;
m_convexB->GetVertex(v,pt);
pt = b2w * pt;
char buf[1000];
if (pt.y() < 0.)
{
sprintf(buf,"PRE ERROR (%d) %.20E %.20E %.20E!!!!!!!!!\n",v,pt.x(),pt.y(),pt.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
} else
{
sprintf(buf,"PRE %d = %.20E,%.20E,%.20E\n",v,pt.x(),pt.y(),pt.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
}
}
}
*/
SimdTransform b2wp = b2w;
b2wp.setOrigin(b2w.getOrigin() + linearMotionB);
b2wp.setRotation( b2w.getRotation() + angularMotionB);
impactTransB = b2wp;
SimdTransform a2wp;
a2wp.setOrigin(a2w.getOrigin()+ linearMotionA);
a2wp.setRotation(a2w.getRotation()+angularMotionA);
impactTransA = a2wp;
SimdTransform a2winv;
a2winv = a2w.inverse();
SimdTransform b2wpinv;
b2wpinv = b2wp.inverse();
SimdTransform b2winv;
b2winv = b2w.inverse();
SimdTransform a2wpinv;
a2wpinv = a2wp.inverse();
//Redon's version with concatenated transforms
SimdTransform relative;
relative = b2w * b2wpinv * a2wp * a2winv;
//relative = a2winv * a2wp * b2wpinv * b2w;
SimdQuaternion qrel;
relative.getBasis().getRotation(qrel);
SimdVector3 linvel = relative.getOrigin();
if (linvel.length() < SCREWEPSILON)
{
linvel.setValue(0.,0.,0.);
}
SimdVector3 angvel;
angvel[0] = 2.f * SimdAsin (qrel[0]);
angvel[1] = 2.f * SimdAsin (qrel[1]);
angvel[2] = 2.f * SimdAsin (qrel[2]);
if (angvel.length() < SCREWEPSILON)
{
angvel.setValue(0.f,0.f,0.f);
}
//Redon's version with concatenated transforms
m_screwing = BU_Screwing(linvel,angvel);
SimdTransform w2s;
m_screwing.LocalMatrix(w2s);
SimdTransform s2w;
s2w = w2s.inverse();
//impactTransA = a2w;
//impactTransB = b2w;
bool hit = false;
if (SimdFuzzyZero(m_screwing.GetS()) && SimdFuzzyZero(m_screwing.GetW()))
{
//W = 0 , S = 0 , no collision
//toi = 0;
/*
{
const int numvertsB = m_convexB->GetNumVertices();
for (int v=0;v<numvertsB;v++)
{
SimdPoint3 pt;
m_convexB->GetVertex(v,pt);
pt = impactTransB * pt;
char buf[1000];
if (pt.y() < 0.)
{
sprintf(buf,"EARLY POST ERROR (%d) %.20E,%.20E,%.20E!!!!!!!!!\n",v,pt.x(),pt.y(),pt.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
}
else
{
sprintf(buf,"EARLY POST %d = %.20E,%.20E,%.20E\n",v,pt.x(),pt.y(),pt.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
}
}
}
*/
return false;//don't continue moving within epsilon
}
#define EDGEEDGE
#ifdef EDGEEDGE
BU_EdgeEdge edgeEdge;
//for all edged in A check agains all edges in B
for (int ea = 0;ea < m_convexA->GetNumEdges();ea++)
{
SimdPoint3 pA0,pA1;
m_convexA->GetEdge(ea,pA0,pA1);
pA0= a2w * pA0;//in world space
pA0 = w2s * pA0;//in screwing space
pA1= a2w * pA1;//in world space
pA1 = w2s * pA1;//in screwing space
int numedgesB = m_convexB->GetNumEdges();
for (int eb = 0; eb < numedgesB;eb++)
{
{
SimdPoint3 pB0,pB1;
m_convexB->GetEdge(eb,pB0,pB1);
pB0= b2w * pB0;//in world space
pB0 = w2s * pB0;//in screwing space
pB1= b2w * pB1;//in world space
pB1 = w2s * pB1;//in screwing space
SimdScalar lambda,mu;
toiUnscaled = 1.;
SimdVector3 edgeDirA(pA1-pA0);
SimdVector3 edgeDirB(pB1-pB0);
if (edgeEdge.GetTimeOfImpact(m_screwing,pA0,edgeDirA,pB0,edgeDirB,toiUnscaled,lambda,mu))
{
//printf("edgeedge potential hit\n");
if (toiUnscaled>=0)
{
if (toiUnscaled < toiUnscaledLimit)
{
//inside check is already done by checking the mu and gamma !
SimdPoint3 vtx = pA0+lambda * (pA1-pA0);
SimdPoint3 hitpt = m_screwing.InBetweenPosition(vtx,toiUnscaled);
SimdPoint3 hitptWorld = s2w * hitpt;
{
if (toiUnscaled < result.m_fraction)
result.m_fraction = toiUnscaled;
hit = true;
SimdVector3 hitNormal = edgeDirB.cross(edgeDirA);
hitNormal = m_screwing.InBetweenVector(hitNormal,toiUnscaled);
hitNormal.normalize();
//an approximated normal can be calculated by taking the cross product of both edges
//take care of the sign !
SimdVector3 hitNormalWorld = s2w.getBasis() * hitNormal ;
SimdScalar dist = m_screwing.GetU().dot(hitNormalWorld);
if (dist > 0)
hitNormalWorld *= -1;
//todo: this is the wrong point, because b2winv is still at begin of motion
// not at time-of-impact location!
//bhitpt = b2winv * hitptWorld;
// m_manifold.SetContactPoint(BUM_FeatureEdgeEdge,index,ea,eb,hitptWorld,hitNormalWorld);
}
}
}
}
}
index++;
}
};
#endif //EDGEEDGE
#define VERTEXFACE
#ifdef VERTEXFACE
// for all vertices in A, for each face in B,do vertex-face
{
const int numvertsA = m_convexA->GetNumVertices();
for (int v=0;v<numvertsA;v++)
//int v=3;
{
SimdPoint3 vtx;
m_convexA->GetVertex(v,vtx);
vtx = a2w * vtx;//in world space
vtx = w2s * vtx;//in screwing space
const int numplanesB = m_convexB->GetNumPlanes();
for (int p = 0 ; p < numplanesB; p++)
//int p=2;
{
{
SimdVector3 planeNorm;
SimdPoint3 planeSupport;
m_convexB->GetPlane(planeNorm,planeSupport,p);
planeSupport = b2w * planeSupport;//transform to world space
SimdVector3 planeNormWorld = b2w.getBasis() * planeNorm;
planeSupport = w2s * planeSupport ; //transform to screwing space
planeNorm = w2s.getBasis() * planeNormWorld;
planeNorm.normalize();
SimdScalar d = planeSupport.dot(planeNorm);
SimdVector4 planeEq(planeNorm[0],planeNorm[1],planeNorm[2],d);
BU_VertexPoly vtxApolyB;
toiUnscaled = 1.;
if ((p==2) && (v==6))
{
// printf("%f toiUnscaled\n",toiUnscaled);
}
if (vtxApolyB.GetTimeOfImpact(m_screwing,vtx,planeEq,toiUnscaled,false))
{
if (toiUnscaled >= 0. )
{
//not only collect the first point, get every contactpoint, later we have to check the
//manifold properly!
if (toiUnscaled <= toiUnscaledLimit)
{
// printf("toiUnscaled %f\n",toiUnscaled );
SimdPoint3 hitpt = m_screwing.InBetweenPosition(vtx,toiUnscaled);
SimdVector3 hitNormal = m_screwing.InBetweenVector(planeNorm ,toiUnscaled);
SimdVector3 hitNormalWorld = s2w.getBasis() * hitNormal ;
SimdPoint3 hitptWorld = s2w * hitpt;
hitpt = b2winv * hitptWorld;
//vertex has to be 'within' the facet's boundary
if (m_convexB->IsInside(hitpt,m_tolerance))
{
// m_manifold.SetContactPoint(BUM_FeatureVertexFace, index,v,p,hitptWorld,hitNormalWorld);
if (toiUnscaled < result.m_fraction)
result.m_fraction= toiUnscaled;
hit = true;
}
}
}
}
}
index++;
}
}
}
//
// for all vertices in B, for each face in A,do vertex-face
//copy and pasted from all verts A -> all planes B so potential typos!
//todo: make this into one method with a kind of 'swapped' logic
//
{
const int numvertsB = m_convexB->GetNumVertices();
for (int v=0;v<numvertsB;v++)
//int v=0;
{
SimdPoint3 vtx;
m_convexB->GetVertex(v,vtx);
vtx = b2w * vtx;//in world space
/*
char buf[1000];
if (vtx.y() < 0.)
{
sprintf(buf,"ERROR !!!!!!!!!\n",v,vtx.x(),vtx.y(),vtx.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
}
sprintf(buf,"vertexWorld(%d) = (%.20E,%.20E,%.20E)\n",v,vtx.x(),vtx.y(),vtx.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
*/
vtx = w2s * vtx;//in screwing space
const int numplanesA = m_convexA->GetNumPlanes();
for (int p = 0 ; p < numplanesA; p++)
//int p=2;
{
{
SimdVector3 planeNorm;
SimdPoint3 planeSupport;
m_convexA->GetPlane(planeNorm,planeSupport,p);
planeSupport = a2w * planeSupport;//transform to world space
SimdVector3 planeNormWorld = a2w.getBasis() * planeNorm;
planeSupport = w2s * planeSupport ; //transform to screwing space
planeNorm = w2s.getBasis() * planeNormWorld;
planeNorm.normalize();
SimdScalar d = planeSupport.dot(planeNorm);
SimdVector4 planeEq(planeNorm[0],planeNorm[1],planeNorm[2],d);
BU_VertexPoly vtxBpolyA;
toiUnscaled = 1.;
if (vtxBpolyA.GetTimeOfImpact(m_screwing,vtx,planeEq,toiUnscaled,true))
{
if (toiUnscaled>=0.)
{
if (toiUnscaled < toiUnscaledLimit)
{
SimdPoint3 hitpt = m_screwing.InBetweenPosition( vtx , -toiUnscaled);
SimdVector3 hitNormal = m_screwing.InBetweenVector(-planeNorm ,-toiUnscaled);
//SimdScalar len = hitNormal.length()-1;
//assert( SimdFuzzyZero(len) );
SimdVector3 hitNormalWorld = s2w.getBasis() * hitNormal ;
SimdPoint3 hitptWorld = s2w * hitpt;
hitpt = a2winv * hitptWorld;
//vertex has to be 'within' the facet's boundary
if (m_convexA->IsInside(hitpt,m_tolerance))
{
// m_manifold.SetContactPoint(BUM_FeatureFaceVertex,index,p,v,hitptWorld,hitNormalWorld);
if (toiUnscaled <result.m_fraction)
result.m_fraction = toiUnscaled;
hit = true;
}
}
}
}
}
}
index++;
}
}
#endif// VERTEXFACE
//the manifold now consists of all points/normals generated by feature-pairs that have a time-of-impact within this frame
//in addition there are contact points from previous frames
//we have to cleanup the manifold, using an additional epsilon/tolerance
//as long as the distance from the contactpoint (in worldspace) to both objects is within this epsilon we keep the point
//else throw it away
if (hit)
{
//try to avoid numerical drift on close contact
if (result.m_fraction < 0.00001)
{
// printf("toiUnscaledMin< 0.00001\n");
impactTransA = a2w;
impactTransB = b2w;
} else
{
//SimdScalar vel = linearMotionB.length();
//todo: check this margin
result.m_fraction *= 0.99f;
//move B to new position
impactTransB.setOrigin(b2w.getOrigin()+ result.m_fraction*linearMotionB);
SimdQuaternion ornB = b2w.getRotation()+angularMotionB*result.m_fraction;
ornB.normalize();
impactTransB.setRotation(ornB);
//now transform A
SimdTransform a2s,a2b;
a2s.mult( w2s , a2w);
a2s= m_screwing.InBetweenTransform(a2s,result.m_fraction);
a2s.multInverseLeft(w2s,a2s);
a2b.multInverseLeft(b2w, a2s);
//transform by motion B
impactTransA.mult(impactTransB, a2b);
//normalize rotation
SimdQuaternion orn;
impactTransA.getBasis().getRotation(orn);
orn.normalize();
impactTransA.setBasis(SimdMatrix3x3(orn));
}
}
/*
{
const int numvertsB = m_convexB->GetNumVertices();
for (int v=0;v<numvertsB;v++)
{
SimdPoint3 pt;
m_convexB->GetVertex(v,pt);
pt = impactTransB * pt;
char buf[1000];
if (pt.y() < 0.)
{
sprintf(buf,"POST ERROR (%d) %.20E,%.20E,%.20E!!!!!!!!!\n",v,pt.x(),pt.y(),pt.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
}
else
{
sprintf(buf,"POST %d = %.20E,%.20E,%.20E\n",v,pt.x(),pt.y(),pt.z());
if (debugFile)
fwrite(buf,1,strlen(buf),debugFile);
}
}
}
*/
return hit;
}
void clientDisplay(void) {
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glDisable(GL_LIGHTING);
//GL_ShapeDrawer::DrawCoordSystem();
float m[16];
int i;
GjkPairDetector convexConvex(shapePtr[0],shapePtr[1],&sGjkSimplexSolver,0);
SimdVector3 seperatingAxis(0.00000000f,0.059727669f,0.29259586f);
convexConvex.SetCachedSeperatingAxis(seperatingAxis);
PointCollector gjkOutput;
GjkPairDetector::ClosestPointInput input;
input.m_transformA = tr[0];
input.m_transformB = tr[1];
convexConvex.GetClosestPoints(input ,gjkOutput,0);
if (gjkOutput.m_hasResult)
{
SimdVector3 endPt = gjkOutput.m_pointInWorld +
gjkOutput.m_normalOnBInWorld*gjkOutput.m_distance;
glBegin(GL_LINES);
glColor3f(1, 0, 0);
glVertex3d(gjkOutput.m_pointInWorld.x(), gjkOutput.m_pointInWorld.y(),gjkOutput.m_pointInWorld.z());
glVertex3d(endPt.x(),endPt.y(),endPt.z());
//glVertex3d(gjkOutputm_pointInWorld.x(), gjkOutputm_pointInWorld.y(),gjkOutputm_pointInWorld.z());
//glVertex3d(gjkOutputm_pointInWorld.x(), gjkOutputm_pointInWorld.y(),gjkOutputm_pointInWorld.z());
glEnd();
}
for (i=0; i<numObjects; i++)
{
tr[i].getOpenGLMatrix( m );
GL_ShapeDrawer::DrawOpenGL(m,shapePtr[i],SimdVector3(1,1,1),getDebugMode());
}
simplex.SetSimplexSolver(&sGjkSimplexSolver);
SimdPoint3 ybuf[4],pbuf[4],qbuf[4];
int numpoints = sGjkSimplexSolver.getSimplex(pbuf,qbuf,ybuf);
simplex.Reset();
for (i=0; i<numpoints; i++)
simplex.AddVertex(ybuf[i]);
SimdTransform ident;
ident.setIdentity();
ident.getOpenGLMatrix(m);
GL_ShapeDrawer::DrawOpenGL(m,&simplex,SimdVector3(1,1,1),getDebugMode());
SimdQuaternion orn;
orn.setEuler(yaw,pitch,roll);
tr[0].setRotation(orn);
// pitch += 0.005f;
// yaw += 0.01f;
glFlush();
glutSwapBuffers();
}
void clientDisplay(void) {
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glDisable(GL_LIGHTING);
if (collisionWorld)
collisionWorld->PerformDiscreteCollisionDetection();
///one way to draw all the contact points is iterating over contact manifolds / points:
int i;
int numManifolds = collisionWorld->GetDispatcher()->GetNumManifolds();
for (i=0;i<numManifolds;i++)
{
PersistentManifold* contactManifold = collisionWorld->GetDispatcher()->GetManifoldByIndexInternal(i);
CollisionObject* obA = static_cast<CollisionObject*>(contactManifold->GetBody0());
CollisionObject* obB = static_cast<CollisionObject*>(contactManifold->GetBody1());
contactManifold->RefreshContactPoints(obA->m_worldTransform,obB->m_worldTransform);
int numContacts = contactManifold->GetNumContacts();
for (int j=0;j<numContacts;j++)
{
ManifoldPoint& pt = contactManifold->GetContactPoint(j);
glBegin(GL_LINES);
glColor3f(1, 0, 1);
SimdVector3 ptA = pt.GetPositionWorldOnA();
SimdVector3 ptB = pt.GetPositionWorldOnB();
glVertex3d(ptA.x(),ptA.y(),ptA.z());
glVertex3d(ptB.x(),ptB.y(),ptB.z());
glEnd();
}
}
//GL_ShapeDrawer::DrawCoordSystem();
float m[16];
for (i=0;i<numObjects;i++)
{
objects[i].m_worldTransform.getOpenGLMatrix( m );
GL_ShapeDrawer::DrawOpenGL(m,objects[i].m_collisionShape,SimdVector3(1,1,1),getDebugMode());
}
SimdQuaternion orn;
orn.setEuler(yaw,pitch,roll);
objects[1].m_worldTransform.setOrigin(objects[1].m_worldTransform.getOrigin()+SimdVector3(0,-0.01,0));
//objects[0].m_worldTransform.setRotation(orn);
pitch += 0.005f;
yaw += 0.01f;
glFlush();
glutSwapBuffers();
}
