StructLayout::StructLayout(const StructType *ST, const TargetData &TD) {
assert(!ST->isOpaque() && "Cannot get layout of opaque structs");
StructAlignment = 0;
StructSize = 0;
NumElements = ST->getNumElements();
// Loop over each of the elements, placing them in memory.
for (unsigned i = 0, e = NumElements; i != e; ++i) {
const Type *Ty = ST->getElementType(i);
unsigned TyAlign = ST->isPacked() ? 1 : TD.getABITypeAlignment(Ty);
// Add padding if necessary to align the data element properly.
if ((StructSize & (TyAlign-1)) != 0)
StructSize = TargetData::RoundUpAlignment(StructSize, TyAlign);
// Keep track of maximum alignment constraint.
StructAlignment = std::max(TyAlign, StructAlignment);
MemberOffsets[i] = StructSize;
StructSize += TD.getTypeAllocSize(Ty); // Consume space for this data item
}
// Empty structures have alignment of 1 byte.
if (StructAlignment == 0) StructAlignment = 1;
// Add padding to the end of the struct so that it could be put in an array
// and all array elements would be aligned correctly.
if ((StructSize & (StructAlignment-1)) != 0)
StructSize = TargetData::RoundUpAlignment(StructSize, StructAlignment);
}
void
nest::TargetTable::add_target( const thread tid,
const thread target_rank,
const TargetData& target_data )
{
const index lid = target_data.get_source_lid();
vector_util::grow( targets_[ tid ][ lid ] );
if ( target_data.is_primary() )
{
const TargetDataFields& target_fields = target_data.target_data;
targets_[ tid ][ lid ].push_back( Target( target_fields.get_tid(),
target_rank,
target_fields.get_syn_id(),
target_fields.get_lcid() ) );
}
else
{
const SecondaryTargetDataFields& secondary_fields =
target_data.secondary_data;
const size_t send_buffer_pos = secondary_fields.get_send_buffer_pos();
const synindex syn_id = secondary_fields.get_syn_id();
assert( syn_id < secondary_send_buffer_pos_[ tid ][ lid ].size() );
secondary_send_buffer_pos_[ tid ][ lid ][ syn_id ].push_back(
send_buffer_pos );
}
}
bool MemsetRange::isProfitableToUseMemset(const TargetData &TD) const {
// If we found more than 8 stores to merge or 64 bytes, use memset.
if (TheStores.size() >= 8 || End-Start >= 64) return true;
// Assume that the code generator is capable of merging pairs of stores
// together if it wants to.
if (TheStores.size() <= 2) return false;
// If we have fewer than 8 stores, it can still be worthwhile to do this.
// For example, merging 4 i8 stores into an i32 store is useful almost always.
// However, merging 2 32-bit stores isn't useful on a 32-bit architecture (the
// memset will be split into 2 32-bit stores anyway) and doing so can
// pessimize the llvm optimizer.
//
// Since we don't have perfect knowledge here, make some assumptions: assume
// the maximum GPR width is the same size as the pointer size and assume that
// this width can be stored. If so, check to see whether we will end up
// actually reducing the number of stores used.
unsigned Bytes = unsigned(End-Start);
unsigned NumPointerStores = Bytes/TD.getPointerSize();
// Assume the remaining bytes if any are done a byte at a time.
unsigned NumByteStores = Bytes - NumPointerStores*TD.getPointerSize();
// If we will reduce the # stores (according to this heuristic), do the
// transformation. This encourages merging 4 x i8 -> i32 and 2 x i16 -> i32
// etc.
return TheStores.size() > NumPointerStores+NumByteStores;
}
NewProjectDialog::NewProjectDialog(QWidget *parent) :
QDialog(parent),
ui(new Ui::NewProjectDialog)
{
ui->setupUi(this);
/* Getting the default directory from the application settings */
QSettings settings;
settings.beginGroup("NewProjectDialog");
ui->locationBox->setText(settings.value("defaultDir",
QDir::home().absolutePath())
.toString());
settings.endGroup();
/* Populating the target box */
TargetData targets;
for(int i = 0; i < targets.count(); i++)
{
ui->targetBox->insertItem(i, QIcon(), targets.name(i), targets.id(i));
}
targetChange(0);
/* Connecting the browse button and target box */
QObject::connect(ui->browseButton, SIGNAL(clicked()),
this, SLOT(browse()));
QObject::connect(ui->targetBox, SIGNAL(currentIndexChanged(int)),
this, SLOT(targetChange(int)));
}
// Write ViewPaneBlock keywords
bool UChromaSession::writeViewPaneBlock(LineParser& parser, ViewPane* pane)
{
parser.writeLineF(" %s '%s'\n", UChromaSession::viewKeyword(UChromaSession::ViewPaneBlockKeyword), qPrintable(pane->name()));
parser.writeLineF(" %s %s\n", UChromaSession::viewPaneKeyword(UChromaSession::AutoPositionTitlesKeyword), stringBool(pane->axes().autoPositionTitles()));
for (int axis=0; axis < 3; ++axis) writeAxisBlock(parser, pane->axes(), axis);
parser.writeLineF(" %s %i\n", UChromaSession::viewPaneKeyword(UChromaSession::BoundingBoxKeyword), pane->boundingBox());
parser.writeLineF(" %s %f\n", UChromaSession::viewPaneKeyword(UChromaSession::BoundingBoxPlaneYKeyword), pane->boundingBoxPlaneY());
parser.writeLineF(" %s %s\n", UChromaSession::viewPaneKeyword(UChromaSession::FlatLabelsKeyword), stringBool(pane->flatLabels()));
parser.writeLineF(" %s %i %i %i %i\n", UChromaSession::viewPaneKeyword(UChromaSession::GeometryKeyword), pane->bottomEdge(), pane->leftEdge(), pane->width(), pane->height());
parser.writeLineF(" %s %f\n", UChromaSession::viewPaneKeyword(UChromaSession::LabelPointSizeKeyword), pane->labelPointSize());
parser.writeLineF(" %s %f\n", UChromaSession::viewPaneKeyword(UChromaSession::TitlePointSizeKeyword), pane->titlePointSize());
Matrix mat = pane->viewRotation();
Vec3<double> trans = pane->viewTranslation();
parser.writeLineF(" %s %f %f %f\n", UChromaSession::viewPaneKeyword(UChromaSession::RotationXKeyword), mat[0], mat[1], mat[2]);
parser.writeLineF(" %s %f %f %f\n", UChromaSession::viewPaneKeyword(UChromaSession::RotationYKeyword), mat[4], mat[5], mat[6]);
parser.writeLineF(" %s %f %f %f\n", UChromaSession::viewPaneKeyword(UChromaSession::RotationZKeyword), mat[8], mat[9], mat[10]);
parser.writeLineF(" %s %f %f %f\n", UChromaSession::viewPaneKeyword(UChromaSession::TranslationKeyword), trans.x, trans.y, trans.z);
parser.writeLineF(" %s %s\n", UChromaSession::viewPaneKeyword(UChromaSession::PerspectiveKeyword), stringBool(pane->hasPerspective()));
parser.writeLineF(" %s '%s'\n", UChromaSession::viewPaneKeyword(UChromaSession::RoleKeyword), ViewPane::paneRole(pane->role()));
for (TargetData* target = pane->collectionTargets(); target != NULL; target = target->next)
{
if (!Collection::objectValid(target->collection(), "collection in UChromaSession::writeViewPaneBlock")) continue;
parser.writeLineF(" %s '%s'\n", UChromaSession::viewPaneKeyword(UChromaSession::RoleTargetCollectionKeyword), qPrintable(target->collection()->locator()));
}
for (RefListItem<ViewPane,bool>* ri = pane->paneTargets(); ri != NULL; ri = ri->next) parser.writeLineF(" %s '%s'\n", UChromaSession::viewPaneKeyword(UChromaSession::RoleTargetPaneKeyword), qPrintable(ri->item->name()));
parser.writeLineF(" %s %s\n", UChromaSession::viewPaneKeyword(UChromaSession::UseBestFlatViewKeyword), stringBool(pane->axes().useBestFlatView()));
parser.writeLineF(" %s '%s'\n", UChromaSession::viewPaneKeyword(UChromaSession::ViewTypeKeyword), ViewPane::viewType(pane->viewType()));
parser.writeLineF(" %s\n", UChromaSession::viewPaneKeyword(UChromaSession::EndViewPaneKeyword));
return true;
}
static int64_t GetOffsetFromIndex(const GEPOperator *GEP, unsigned Idx,
bool &VariableIdxFound, const TargetData &TD) {
// Skip over the first indices.
gep_type_iterator GTI = gep_type_begin(GEP);
for (unsigned i = 1; i != Idx; ++i, ++GTI)
/*skip along*/;
// Compute the offset implied by the rest of the indices.
int64_t Offset = 0;
for (unsigned i = Idx, e = GEP->getNumOperands(); i != e; ++i, ++GTI) {
ConstantInt *OpC = dyn_cast<ConstantInt>(GEP->getOperand(i));
if (OpC == 0)
return VariableIdxFound = true;
if (OpC->isZero()) continue; // No offset.
// Handle struct indices, which add their field offset to the pointer.
if (StructType *STy = dyn_cast<StructType>(*GTI)) {
Offset += TD.getStructLayout(STy)->getElementOffset(OpC->getZExtValue());
continue;
}
// Otherwise, we have a sequential type like an array or vector. Multiply
// the index by the ElementSize.
uint64_t Size = TD.getTypeAllocSize(GTI.getIndexedType());
Offset += Size*OpC->getSExtValue();
}
return Offset;
}
static unsigned getTypeSize(TargetData &TD, Type *type) {
if (type->isFunctionTy()) /* it is not sized, weird */
return TD.getPointerSize();
if (!type->isSized())
return 100; /* FIXME */
if (StructType *ST = dyn_cast<StructType>(type))
return TD.getStructLayout(ST)->getSizeInBytes();
return TD.getTypeAllocSize(type);
}
/// IsConstantOffsetFromGlobal - If this constant is actually a constant offset
/// from a global, return the global and the constant. Because of
/// constantexprs, this function is recursive.
static bool IsConstantOffsetFromGlobal(Constant *C, GlobalValue *&GV,
int64_t &Offset, const TargetData &TD) {
// Trivial case, constant is the global.
if ((GV = dyn_cast<GlobalValue>(C))) {
Offset = 0;
return true;
}
// Otherwise, if this isn't a constant expr, bail out.
ConstantExpr *CE = dyn_cast<ConstantExpr>(C);
if (!CE) return false;
// Look through ptr->int and ptr->ptr casts.
if (CE->getOpcode() == Instruction::PtrToInt ||
CE->getOpcode() == Instruction::BitCast)
return IsConstantOffsetFromGlobal(CE->getOperand(0), GV, Offset, TD);
// i32* getelementptr ([5 x i32]* @a, i32 0, i32 5)
if (CE->getOpcode() == Instruction::GetElementPtr) {
// Cannot compute this if the element type of the pointer is missing size
// info.
if (!cast<PointerType>(CE->getOperand(0)->getType())->getElementType()->isSized())
return false;
// If the base isn't a global+constant, we aren't either.
if (!IsConstantOffsetFromGlobal(CE->getOperand(0), GV, Offset, TD))
return false;
// Otherwise, add any offset that our operands provide.
gep_type_iterator GTI = gep_type_begin(CE);
for (unsigned i = 1, e = CE->getNumOperands(); i != e; ++i, ++GTI) {
ConstantInt *CI = dyn_cast<ConstantInt>(CE->getOperand(i));
if (!CI) return false; // Index isn't a simple constant?
if (CI->getZExtValue() == 0) continue; // Not adding anything.
if (const StructType *ST = dyn_cast<StructType>(*GTI)) {
// N = N + Offset
Offset += TD.getStructLayout(ST)->getElementOffset(CI->getZExtValue());
} else {
const SequentialType *SQT = cast<SequentialType>(*GTI);
Offset += TD.getTypeSize(SQT->getElementType())*CI->getSExtValue();
}
}
return true;
}
return false;
}
static void ComputeStructureFieldIndices(const Type *Ty, unsigned Offset,
std::vector<unsigned> &Idxs,
const TargetData &TD) {
if (Ty->isFirstClassType()) {
assert(Offset == 0 && "Illegal structure index!");
return;
}
if (const SequentialType *STy = dyn_cast<SequentialType>(Ty)) {
ComputeStructureFieldIndices(STy->getElementType(), Offset, Idxs, TD);
} else if (const StructType *STy = dyn_cast<StructType>(Ty)) {
const StructLayout *SL = TD.getStructLayout(STy);
std::vector<uint64_t>::const_iterator SI =
std::upper_bound(SL->MemberOffsets.begin(), SL->MemberOffsets.end(),
Offset);
assert(SI != SL->MemberOffsets.begin() && "Offset not in structure type!");
--SI;
assert(*SI <= Offset && "upper_bound didn't work");
assert((SI == SL->MemberOffsets.begin() || *(SI-1) < Offset) &&
(SI+1 == SL->MemberOffsets.end() || *(SI+1) > Offset) &&
"Upper bound didn't work!");
Offset -= *SI; // Skip over the offset to this structure field.
unsigned Idx = SI - SL->MemberOffsets.begin();
assert(Idx < STy->getNumElements() && "Illegal structure index");
Idxs.push_back(Idx);
ComputeStructureFieldIndices(STy->getElementType(Idx), Offset, Idxs, TD);
} else {
assert(0 && "Unknown type to index into!");
}
}
/// isObjectSmallerThan - Return true if we can prove that the object specified
/// by V is smaller than Size.
static bool isObjectSmallerThan(const Value *V, unsigned Size,
const TargetData &TD) {
const Type *AccessTy;
if (const GlobalVariable *GV = dyn_cast<GlobalVariable>(V)) {
AccessTy = GV->getType()->getElementType();
} else if (const AllocaInst *AI = dyn_cast<AllocaInst>(V)) {
if (!AI->isArrayAllocation())
AccessTy = AI->getType()->getElementType();
else
return false;
} else if (const CallInst* CI = extractMallocCall(V)) {
if (!isArrayMalloc(V, &TD))
// The size is the argument to the malloc call.
if (const ConstantInt* C = dyn_cast<ConstantInt>(CI->getOperand(1)))
return (C->getZExtValue() < Size);
return false;
} else if (const Argument *A = dyn_cast<Argument>(V)) {
if (A->hasByValAttr())
AccessTy = cast<PointerType>(A->getType())->getElementType();
else
return false;
} else {
return false;
}
if (AccessTy->isSized())
return TD.getTypeAllocSize(AccessTy) < Size;
return false;
}
/// getPointeeAlignment - Compute the minimum alignment of the value pointed
/// to by the given pointer.
static unsigned getPointeeAlignment(Value *V, const TargetData &TD) {
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(V))
if (CE->getOpcode() == Instruction::BitCast ||
(CE->getOpcode() == Instruction::GetElementPtr &&
cast<GEPOperator>(CE)->hasAllZeroIndices()))
return getPointeeAlignment(CE->getOperand(0), TD);
if (GlobalVariable *GV = dyn_cast<GlobalVariable>(V))
if (!GV->isDeclaration())
return TD.getPreferredAlignment(GV);
if (PointerType *PT = dyn_cast<PointerType>(V->getType()))
return TD.getABITypeAlignment(PT->getElementType());
return 0;
}
/// getEntryAlignment - Return the alignment of each entry in the jump table.
unsigned MachineJumpTableInfo::getEntryAlignment(const TargetData &TD) const {
// The alignment of a jump table entry is the alignment of int32 unless the
// entry is just the address of a block, in which case it is the pointer
// alignment.
switch (getEntryKind()) {
case MachineJumpTableInfo::EK_BlockAddress:
return TD.getPointerABIAlignment();
case MachineJumpTableInfo::EK_GPRel32BlockAddress:
case MachineJumpTableInfo::EK_LabelDifference32:
case MachineJumpTableInfo::EK_Custom32:
return TD.getABIIntegerTypeAlignment(32);
case MachineJumpTableInfo::EK_Inline:
return 1;
}
assert(0 && "Unknown jump table encoding!");
return ~0;
}
Kleerer(ModulePass &modPass, Module &M, TargetData &TD,
callgraph::Callgraph &CG) : modPass(modPass),
M(M), TD(TD), CG(CG), C(M.getContext()), intPtrTy(TD.getIntPtrType(C)),
done(false) {
voidPtrType = TypeBuilder<void *, false>::get(C);
intType = TypeBuilder<int, false>::get(C);
uintType = TypeBuilder<unsigned, false>::get(C);
}
// Peephole Malloc instructions: we take a look at the use chain of the
// malloc instruction, and try to find out if the following conditions hold:
// 1. The malloc is of the form: 'malloc [sbyte], uint <constant>'
// 2. The only users of the malloc are cast & add instructions
// 3. Of the cast instructions, there is only one destination pointer type
// [RTy] where the size of the pointed to object is equal to the number
// of bytes allocated.
//
// If these conditions hold, we convert the malloc to allocate an [RTy]
// element. TODO: This comment is out of date WRT arrays
//
static bool MallocConvertibleToType(MallocInst *MI, const Type *Ty,
ValueTypeCache &CTMap,
const TargetData &TD) {
if (!isa<PointerType>(Ty)) return false; // Malloc always returns pointers
// Deal with the type to allocate, not the pointer type...
Ty = cast<PointerType>(Ty)->getElementType();
if (!Ty->isSized()) return false; // Can only alloc something with a size
// Analyze the number of bytes allocated...
ExprType Expr = ClassifyExpr(MI->getArraySize());
// Get information about the base datatype being allocated, before & after
int ReqTypeSize = TD.getTypeSize(Ty);
if (ReqTypeSize == 0) return false;
unsigned OldTypeSize = TD.getTypeSize(MI->getType()->getElementType());
// Must have a scale or offset to analyze it...
if (!Expr.Offset && !Expr.Scale && OldTypeSize == 1) return false;
// Get the offset and scale of the allocation...
int64_t OffsetVal = Expr.Offset ? getConstantValue(Expr.Offset) : 0;
int64_t ScaleVal = Expr.Scale ? getConstantValue(Expr.Scale) :(Expr.Var != 0);
// The old type might not be of unit size, take old size into consideration
// here...
int64_t Offset = OffsetVal * OldTypeSize;
int64_t Scale = ScaleVal * OldTypeSize;
// In order to be successful, both the scale and the offset must be a multiple
// of the requested data type's size.
//
if (Offset/ReqTypeSize*ReqTypeSize != Offset ||
Scale/ReqTypeSize*ReqTypeSize != Scale)
return false; // Nope.
return true;
}
void NewProjectDialog::targetChange(int target)
{
TargetData targets;
if(targets.fm(target))
{
ui->fmsBox->setEnabled(true);
ui->rfmsBox->setEnabled(true);
}
else
{
ui->fmsBox->setChecked(false);
ui->rfmsBox->setChecked(false);
ui->fmsBox->setEnabled(false);
ui->rfmsBox->setEnabled(false);
}
if(targets.remoteDepth(target) == TargetData::None)
{
ui->rwpsBox->setChecked(false);
ui->rsbsBox->setChecked(false);
ui->rfmsBox->setChecked(false);
ui->rsbsBox->setEnabled(false);
ui->rwpsBox->setEnabled(false);
ui->rfmsBox->setEnabled(false);
}
else
{
ui->rsbsBox->setEnabled(true);
ui->rwpsBox->setEnabled(true);
if(targets.fm(target))
ui->rfmsBox->setEnabled(true);
}
}
/// getEntrySize - Return the size of each entry in the jump table.
unsigned MachineJumpTableInfo::getEntrySize(const TargetData &TD) const {
// The size of a jump table entry is 4 bytes unless the entry is just the
// address of a block, in which case it is the pointer size.
switch (getEntryKind()) {
case MachineJumpTableInfo::EK_BlockAddress:
return TD.getPointerSize();
case MachineJumpTableInfo::EK_GPRel32BlockAddress:
case MachineJumpTableInfo::EK_LabelDifference32:
case MachineJumpTableInfo::EK_Custom32:
return 4;
case MachineJumpTableInfo::EK_Inline:
return 0;
}
assert(0 && "Unknown jump table encoding!");
return ~0;
}
/// isObjectSmallerThan - Return true if we can prove that the object specified
/// by V is smaller than Size.
static bool isObjectSmallerThan(const Value *V, unsigned Size,
const TargetData &TD) {
const Type *AccessTy;
if (const GlobalVariable *GV = dyn_cast<GlobalVariable>(V)) {
AccessTy = GV->getType()->getElementType();
} else if (const AllocationInst *AI = dyn_cast<AllocationInst>(V)) {
if (!AI->isArrayAllocation())
AccessTy = AI->getType()->getElementType();
else
return false;
} else if (const Argument *A = dyn_cast<Argument>(V)) {
if (A->hasByValAttr())
AccessTy = cast<PointerType>(A->getType())->getElementType();
else
return false;
} else {
return false;
}
if (AccessTy->isSized())
return TD.getTypePaddedSize(AccessTy) < Size;
return false;
}
/// processByValArgument - This is called on every byval argument in call sites.
bool MemCpyOpt::processByValArgument(CallSite CS, unsigned ArgNo) {
TargetData *TD = getAnalysisIfAvailable<TargetData>();
if (!TD) return false;
// Find out what feeds this byval argument.
Value *ByValArg = CS.getArgument(ArgNo);
const Type *ByValTy =cast<PointerType>(ByValArg->getType())->getElementType();
uint64_t ByValSize = TD->getTypeAllocSize(ByValTy);
MemDepResult DepInfo =
MD->getPointerDependencyFrom(AliasAnalysis::Location(ByValArg, ByValSize),
true, CS.getInstruction(),
CS.getInstruction()->getParent());
if (!DepInfo.isClobber())
return false;
// If the byval argument isn't fed by a memcpy, ignore it. If it is fed by
// a memcpy, see if we can byval from the source of the memcpy instead of the
// result.
MemCpyInst *MDep = dyn_cast<MemCpyInst>(DepInfo.getInst());
if (MDep == 0 || MDep->isVolatile() ||
ByValArg->stripPointerCasts() != MDep->getDest())
return false;
// The length of the memcpy must be larger or equal to the size of the byval.
ConstantInt *C1 = dyn_cast<ConstantInt>(MDep->getLength());
if (C1 == 0 || C1->getValue().getZExtValue() < ByValSize)
return false;
// Get the alignment of the byval. If it is greater than the memcpy, then we
// can't do the substitution. If the call doesn't specify the alignment, then
// it is some target specific value that we can't know.
unsigned ByValAlign = CS.getParamAlignment(ArgNo+1);
if (ByValAlign == 0 || MDep->getAlignment() < ByValAlign)
return false;
// Verify that the copied-from memory doesn't change in between the memcpy and
// the byval call.
// memcpy(a <- b)
// *b = 42;
// foo(*a)
// It would be invalid to transform the second memcpy into foo(*b).
//
// NOTE: This is conservative, it will stop on any read from the source loc,
// not just the defining memcpy.
MemDepResult SourceDep =
MD->getPointerDependencyFrom(AliasAnalysis::getLocationForSource(MDep),
false, CS.getInstruction(), MDep->getParent());
if (!SourceDep.isClobber() || SourceDep.getInst() != MDep)
return false;
Value *TmpCast = MDep->getSource();
if (MDep->getSource()->getType() != ByValArg->getType())
TmpCast = new BitCastInst(MDep->getSource(), ByValArg->getType(),
"tmpcast", CS.getInstruction());
DEBUG(dbgs() << "MemCpyOpt: Forwarding memcpy to byval:\n"
<< " " << *MDep << "\n"
<< " " << *CS.getInstruction() << "\n");
// Otherwise we're good! Update the byval argument.
CS.setArgument(ArgNo, TmpCast);
++NumMemCpyInstr;
return true;
}
void SVMBlockSizeAccumulator::AddConstant(const TargetData &TD,
const MachineConstantPoolEntry &CPE)
{
AddConstant(TD.getTypeAllocSize(CPE.getType()), CPE.getAlignment());
}
/// processStore - When GVN is scanning forward over instructions, we look for
/// some other patterns to fold away. In particular, this looks for stores to
/// neighboring locations of memory. If it sees enough consequtive ones
/// (currently 4) it attempts to merge them together into a memcpy/memset.
bool MemCpyOpt::processStore(StoreInst *SI, BasicBlock::iterator &BBI) {
if (SI->isVolatile()) return false;
LLVMContext &Context = SI->getContext();
// There are two cases that are interesting for this code to handle: memcpy
// and memset. Right now we only handle memset.
// Ensure that the value being stored is something that can be memset'able a
// byte at a time like "0" or "-1" or any width, as well as things like
// 0xA0A0A0A0 and 0.0.
Value *ByteVal = isBytewiseValue(SI->getOperand(0));
if (!ByteVal)
return false;
TargetData *TD = getAnalysisIfAvailable<TargetData>();
if (!TD) return false;
AliasAnalysis &AA = getAnalysis<AliasAnalysis>();
Module *M = SI->getParent()->getParent()->getParent();
// Okay, so we now have a single store that can be splatable. Scan to find
// all subsequent stores of the same value to offset from the same pointer.
// Join these together into ranges, so we can decide whether contiguous blocks
// are stored.
MemsetRanges Ranges(*TD);
Value *StartPtr = SI->getPointerOperand();
BasicBlock::iterator BI = SI;
for (++BI; !isa<TerminatorInst>(BI); ++BI) {
if (isa<CallInst>(BI) || isa<InvokeInst>(BI)) {
// If the call is readnone, ignore it, otherwise bail out. We don't even
// allow readonly here because we don't want something like:
// A[1] = 2; strlen(A); A[2] = 2; -> memcpy(A, ...); strlen(A).
if (AA.getModRefBehavior(CallSite::get(BI)) ==
AliasAnalysis::DoesNotAccessMemory)
continue;
// TODO: If this is a memset, try to join it in.
break;
} else if (isa<VAArgInst>(BI) || isa<LoadInst>(BI))
break;
// If this is a non-store instruction it is fine, ignore it.
StoreInst *NextStore = dyn_cast<StoreInst>(BI);
if (NextStore == 0) continue;
// If this is a store, see if we can merge it in.
if (NextStore->isVolatile()) break;
// Check to see if this stored value is of the same byte-splattable value.
if (ByteVal != isBytewiseValue(NextStore->getOperand(0)))
break;
// Check to see if this store is to a constant offset from the start ptr.
int64_t Offset;
if (!IsPointerOffset(StartPtr, NextStore->getPointerOperand(), Offset, *TD))
break;
Ranges.addStore(Offset, NextStore);
}
// If we have no ranges, then we just had a single store with nothing that
// could be merged in. This is a very common case of course.
if (Ranges.empty())
return false;
// If we had at least one store that could be merged in, add the starting
// store as well. We try to avoid this unless there is at least something
// interesting as a small compile-time optimization.
Ranges.addStore(0, SI);
// Now that we have full information about ranges, loop over the ranges and
// emit memset's for anything big enough to be worthwhile.
bool MadeChange = false;
for (MemsetRanges::const_iterator I = Ranges.begin(), E = Ranges.end();
I != E; ++I) {
const MemsetRange &Range = *I;
if (Range.TheStores.size() == 1) continue;
// If it is profitable to lower this range to memset, do so now.
if (!Range.isProfitableToUseMemset(*TD))
continue;
// Otherwise, we do want to transform this! Create a new memset. We put
// the memset right before the first instruction that isn't part of this
// memset block. This ensure that the memset is dominated by any addressing
// instruction needed by the start of the block.
BasicBlock::iterator InsertPt = BI;
// Get the starting pointer of the block.
StartPtr = Range.StartPtr;
// Determine alignment
unsigned Alignment = Range.Alignment;
if (Alignment == 0) {
const Type *EltType =
cast<PointerType>(StartPtr->getType())->getElementType();
Alignment = TD->getABITypeAlignment(EltType);
}
// Cast the start ptr to be i8* as memset requires.
const PointerType* StartPTy = cast<PointerType>(StartPtr->getType());
const PointerType *i8Ptr = Type::getInt8PtrTy(Context,
StartPTy->getAddressSpace());
if (StartPTy!= i8Ptr)
StartPtr = new BitCastInst(StartPtr, i8Ptr, StartPtr->getName(),
InsertPt);
Value *Ops[] = {
StartPtr, ByteVal, // Start, value
// size
ConstantInt::get(Type::getInt64Ty(Context), Range.End-Range.Start),
// align
ConstantInt::get(Type::getInt32Ty(Context), Alignment),
// volatile
ConstantInt::get(Type::getInt1Ty(Context), 0),
};
const Type *Tys[] = { Ops[0]->getType(), Ops[2]->getType() };
Function *MemSetF = Intrinsic::getDeclaration(M, Intrinsic::memset, Tys, 2);
Value *C = CallInst::Create(MemSetF, Ops, Ops+5, "", InsertPt);
DEBUG(dbgs() << "Replace stores:\n";
for (unsigned i = 0, e = Range.TheStores.size(); i != e; ++i)
dbgs() << *Range.TheStores[i];
dbgs() << "With: " << *C); C=C;
// Don't invalidate the iterator
BBI = BI;
// Zap all the stores.
for (SmallVector<StoreInst*, 16>::const_iterator
SI = Range.TheStores.begin(),
SE = Range.TheStores.end(); SI != SE; ++SI)
(*SI)->eraseFromParent();
++NumMemSetInfer;
MadeChange = true;
}
return MadeChange;
}
/// performCallSlotOptzn - takes a memcpy and a call that it depends on,
/// and checks for the possibility of a call slot optimization by having
/// the call write its result directly into the destination of the memcpy.
bool MemCpyOpt::performCallSlotOptzn(MemCpyInst *cpy, CallInst *C) {
// The general transformation to keep in mind is
//
// call @func(..., src, ...)
// memcpy(dest, src, ...)
//
// ->
//
// memcpy(dest, src, ...)
// call @func(..., dest, ...)
//
// Since moving the memcpy is technically awkward, we additionally check that
// src only holds uninitialized values at the moment of the call, meaning that
// the memcpy can be discarded rather than moved.
// Deliberately get the source and destination with bitcasts stripped away,
// because we'll need to do type comparisons based on the underlying type.
Value *cpyDest = cpy->getDest();
Value *cpySrc = cpy->getSource();
CallSite CS = CallSite::get(C);
// We need to be able to reason about the size of the memcpy, so we require
// that it be a constant.
ConstantInt *cpyLength = dyn_cast<ConstantInt>(cpy->getLength());
if (!cpyLength)
return false;
// Require that src be an alloca. This simplifies the reasoning considerably.
AllocaInst *srcAlloca = dyn_cast<AllocaInst>(cpySrc);
if (!srcAlloca)
return false;
// Check that all of src is copied to dest.
TargetData *TD = getAnalysisIfAvailable<TargetData>();
if (!TD) return false;
ConstantInt *srcArraySize = dyn_cast<ConstantInt>(srcAlloca->getArraySize());
if (!srcArraySize)
return false;
uint64_t srcSize = TD->getTypeAllocSize(srcAlloca->getAllocatedType()) *
srcArraySize->getZExtValue();
if (cpyLength->getZExtValue() < srcSize)
return false;
// Check that accessing the first srcSize bytes of dest will not cause a
// trap. Otherwise the transform is invalid since it might cause a trap
// to occur earlier than it otherwise would.
if (AllocaInst *A = dyn_cast<AllocaInst>(cpyDest)) {
// The destination is an alloca. Check it is larger than srcSize.
ConstantInt *destArraySize = dyn_cast<ConstantInt>(A->getArraySize());
if (!destArraySize)
return false;
uint64_t destSize = TD->getTypeAllocSize(A->getAllocatedType()) *
destArraySize->getZExtValue();
if (destSize < srcSize)
return false;
} else if (Argument *A = dyn_cast<Argument>(cpyDest)) {
// If the destination is an sret parameter then only accesses that are
// outside of the returned struct type can trap.
if (!A->hasStructRetAttr())
return false;
const Type *StructTy = cast<PointerType>(A->getType())->getElementType();
uint64_t destSize = TD->getTypeAllocSize(StructTy);
if (destSize < srcSize)
return false;
} else {
return false;
}
// Check that src is not accessed except via the call and the memcpy. This
// guarantees that it holds only undefined values when passed in (so the final
// memcpy can be dropped), that it is not read or written between the call and
// the memcpy, and that writing beyond the end of it is undefined.
SmallVector<User*, 8> srcUseList(srcAlloca->use_begin(),
srcAlloca->use_end());
while (!srcUseList.empty()) {
User *UI = srcUseList.pop_back_val();
if (isa<BitCastInst>(UI)) {
for (User::use_iterator I = UI->use_begin(), E = UI->use_end();
I != E; ++I)
srcUseList.push_back(*I);
} else if (GetElementPtrInst *G = dyn_cast<GetElementPtrInst>(UI)) {
if (G->hasAllZeroIndices())
for (User::use_iterator I = UI->use_begin(), E = UI->use_end();
I != E; ++I)
srcUseList.push_back(*I);
else
return false;
} else if (UI != C && UI != cpy) {
return false;
}
}
// Since we're changing the parameter to the callsite, we need to make sure
// that what would be the new parameter dominates the callsite.
DominatorTree &DT = getAnalysis<DominatorTree>();
if (Instruction *cpyDestInst = dyn_cast<Instruction>(cpyDest))
if (!DT.dominates(cpyDestInst, C))
return false;
// In addition to knowing that the call does not access src in some
// unexpected manner, for example via a global, which we deduce from
// the use analysis, we also need to know that it does not sneakily
// access dest. We rely on AA to figure this out for us.
AliasAnalysis &AA = getAnalysis<AliasAnalysis>();
if (AA.getModRefInfo(C, cpy->getRawDest(), srcSize) !=
AliasAnalysis::NoModRef)
return false;
// All the checks have passed, so do the transformation.
bool changedArgument = false;
for (unsigned i = 0; i < CS.arg_size(); ++i)
if (CS.getArgument(i)->stripPointerCasts() == cpySrc) {
if (cpySrc->getType() != cpyDest->getType())
cpyDest = CastInst::CreatePointerCast(cpyDest, cpySrc->getType(),
cpyDest->getName(), C);
changedArgument = true;
if (CS.getArgument(i)->getType() == cpyDest->getType())
CS.setArgument(i, cpyDest);
else
CS.setArgument(i, CastInst::CreatePointerCast(cpyDest,
CS.getArgument(i)->getType(), cpyDest->getName(), C));
}
if (!changedArgument)
return false;
// Drop any cached information about the call, because we may have changed
// its dependence information by changing its parameter.
MemoryDependenceAnalysis &MD = getAnalysis<MemoryDependenceAnalysis>();
MD.removeInstruction(C);
// Remove the memcpy
MD.removeInstruction(cpy);
cpy->eraseFromParent();
++NumMemCpyInstr;
return true;
}
// ExpressionConvertibleToType - Return true if it is possible
bool llvm::ExpressionConvertibleToType(Value *V, const Type *Ty,
ValueTypeCache &CTMap, const TargetData &TD) {
// Expression type must be holdable in a register.
if (!Ty->isFirstClassType())
return false;
ValueTypeCache::iterator CTMI = CTMap.find(V);
if (CTMI != CTMap.end()) return CTMI->second == Ty;
// If it's a constant... all constants can be converted to a different
// type.
//
if (isa<Constant>(V) && !isa<GlobalValue>(V))
return true;
CTMap[V] = Ty;
if (V->getType() == Ty) return true; // Expression already correct type!
Instruction *I = dyn_cast<Instruction>(V);
if (I == 0) return false; // Otherwise, we can't convert!
switch (I->getOpcode()) {
case Instruction::Cast:
// We can convert the expr if the cast destination type is losslessly
// convertible to the requested type.
if (!Ty->isLosslesslyConvertibleTo(I->getType())) return false;
// We also do not allow conversion of a cast that casts from a ptr to array
// of X to a *X. For example: cast [4 x %List *] * %val to %List * *
//
if (const PointerType *SPT =
dyn_cast<PointerType>(I->getOperand(0)->getType()))
if (const PointerType *DPT = dyn_cast<PointerType>(I->getType()))
if (const ArrayType *AT = dyn_cast<ArrayType>(SPT->getElementType()))
if (AT->getElementType() == DPT->getElementType())
return false;
break;
case Instruction::Add:
case Instruction::Sub:
if (!Ty->isInteger() && !Ty->isFloatingPoint()) return false;
if (!ExpressionConvertibleToType(I->getOperand(0), Ty, CTMap, TD) ||
!ExpressionConvertibleToType(I->getOperand(1), Ty, CTMap, TD))
return false;
break;
case Instruction::Shr:
if (!Ty->isInteger()) return false;
if (Ty->isSigned() != V->getType()->isSigned()) return false;
// FALL THROUGH
case Instruction::Shl:
if (!Ty->isInteger()) return false;
if (!ExpressionConvertibleToType(I->getOperand(0), Ty, CTMap, TD))
return false;
break;
case Instruction::Load: {
LoadInst *LI = cast<LoadInst>(I);
if (!ExpressionConvertibleToType(LI->getPointerOperand(),
PointerType::get(Ty), CTMap, TD))
return false;
break;
}
case Instruction::PHI: {
PHINode *PN = cast<PHINode>(I);
// Be conservative if we find a giant PHI node.
if (PN->getNumIncomingValues() > 32) return false;
for (unsigned i = 0; i < PN->getNumIncomingValues(); ++i)
if (!ExpressionConvertibleToType(PN->getIncomingValue(i), Ty, CTMap, TD))
return false;
break;
}
case Instruction::Malloc:
if (!MallocConvertibleToType(cast<MallocInst>(I), Ty, CTMap, TD))
return false;
break;
case Instruction::GetElementPtr: {
// GetElementPtr's are directly convertible to a pointer type if they have
// a number of zeros at the end. Because removing these values does not
// change the logical offset of the GEP, it is okay and fair to remove them.
// This can change this:
// %t1 = getelementptr %Hosp * %hosp, ubyte 4, ubyte 0 ; <%List **>
// %t2 = cast %List * * %t1 to %List *
// into
// %t2 = getelementptr %Hosp * %hosp, ubyte 4 ; <%List *>
//
GetElementPtrInst *GEP = cast<GetElementPtrInst>(I);
const PointerType *PTy = dyn_cast<PointerType>(Ty);
if (!PTy) return false; // GEP must always return a pointer...
const Type *PVTy = PTy->getElementType();
// Check to see if there are zero elements that we can remove from the
// index array. If there are, check to see if removing them causes us to
// get to the right type...
//
std::vector<Value*> Indices(GEP->idx_begin(), GEP->idx_end());
const Type *BaseType = GEP->getPointerOperand()->getType();
const Type *ElTy = 0;
while (!Indices.empty() &&
Indices.back() == Constant::getNullValue(Indices.back()->getType())){
Indices.pop_back();
ElTy = GetElementPtrInst::getIndexedType(BaseType, Indices, true);
if (ElTy == PVTy)
break; // Found a match!!
ElTy = 0;
}
if (ElTy) break; // Found a number of zeros we can strip off!
// Otherwise, we can convert a GEP from one form to the other iff the
// current gep is of the form 'getelementptr sbyte*, long N
// and we could convert this to an appropriate GEP for the new type.
//
if (GEP->getNumOperands() == 2 &&
GEP->getType() == PointerType::get(Type::SByteTy)) {
// Do not Check to see if our incoming pointer can be converted
// to be a ptr to an array of the right type... because in more cases than
// not, it is simply not analyzable because of pointer/array
// discrepancies. To fix this, we will insert a cast before the GEP.
//
// Check to see if 'N' is an expression that can be converted to
// the appropriate size... if so, allow it.
//
std::vector<Value*> Indices;
const Type *ElTy = ConvertibleToGEP(PTy, I->getOperand(1), Indices, TD);
if (ElTy == PVTy) {
if (!ExpressionConvertibleToType(I->getOperand(0),
PointerType::get(ElTy), CTMap, TD))
return false; // Can't continue, ExConToTy might have polluted set!
break;
}
}
// Otherwise, it could be that we have something like this:
// getelementptr [[sbyte] *] * %reg115, long %reg138 ; [sbyte]**
// and want to convert it into something like this:
// getelemenptr [[int] *] * %reg115, long %reg138 ; [int]**
//
if (GEP->getNumOperands() == 2 &&
PTy->getElementType()->isSized() &&
TD.getTypeSize(PTy->getElementType()) ==
TD.getTypeSize(GEP->getType()->getElementType())) {
const PointerType *NewSrcTy = PointerType::get(PVTy);
if (!ExpressionConvertibleToType(I->getOperand(0), NewSrcTy, CTMap, TD))
return false;
break;
}
return false; // No match, maybe next time.
}
case Instruction::Call: {
if (isa<Function>(I->getOperand(0)))
return false; // Don't even try to change direct calls.
// If this is a function pointer, we can convert the return type if we can
// convert the source function pointer.
//
const PointerType *PT = cast<PointerType>(I->getOperand(0)->getType());
const FunctionType *FT = cast<FunctionType>(PT->getElementType());
std::vector<const Type *> ArgTys(FT->param_begin(), FT->param_end());
const FunctionType *NewTy =
FunctionType::get(Ty, ArgTys, FT->isVarArg());
if (!ExpressionConvertibleToType(I->getOperand(0),
PointerType::get(NewTy), CTMap, TD))
return false;
break;
}
default:
return false;
}
// Expressions are only convertible if all of the users of the expression can
// have this value converted. This makes use of the map to avoid infinite
// recursion.
//
for (Value::use_iterator It = I->use_begin(), E = I->use_end(); It != E; ++It)
if (!OperandConvertibleToType(*It, I, Ty, CTMap, TD))
return false;
return true;
}
/// isSafeToPromoteArgument - As you might guess from the name of this method,
/// it checks to see if it is both safe and useful to promote the argument.
/// This method limits promotion of aggregates to only promote up to three
/// elements of the aggregate in order to avoid exploding the number of
/// arguments passed in.
bool ArgPromotion::isSafeToPromoteArgument(Argument *Arg, bool isByVal) const {
typedef std::set<IndicesVector> GEPIndicesSet;
// Quick exit for unused arguments
if (Arg->use_empty())
return true;
// We can only promote this argument if all of the uses are loads, or are GEP
// instructions (with constant indices) that are subsequently loaded.
//
// Promoting the argument causes it to be loaded in the caller
// unconditionally. This is only safe if we can prove that either the load
// would have happened in the callee anyway (ie, there is a load in the entry
// block) or the pointer passed in at every call site is guaranteed to be
// valid.
// In the former case, invalid loads can happen, but would have happened
// anyway, in the latter case, invalid loads won't happen. This prevents us
// from introducing an invalid load that wouldn't have happened in the
// original code.
//
// This set will contain all sets of indices that are loaded in the entry
// block, and thus are safe to unconditionally load in the caller.
GEPIndicesSet SafeToUnconditionallyLoad;
// This set contains all the sets of indices that we are planning to promote.
// This makes it possible to limit the number of arguments added.
GEPIndicesSet ToPromote;
// If the pointer is always valid, any load with first index 0 is valid.
if (isByVal || AllCalleesPassInValidPointerForArgument(Arg))
SafeToUnconditionallyLoad.insert(IndicesVector(1, 0));
// First, iterate the entry block and mark loads of (geps of) arguments as
// safe.
BasicBlock *EntryBlock = Arg->getParent()->begin();
// Declare this here so we can reuse it
IndicesVector Indices;
for (BasicBlock::iterator I = EntryBlock->begin(), E = EntryBlock->end();
I != E; ++I)
if (LoadInst *LI = dyn_cast<LoadInst>(I)) {
Value *V = LI->getPointerOperand();
if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(V)) {
V = GEP->getPointerOperand();
if (V == Arg) {
// This load actually loads (part of) Arg? Check the indices then.
Indices.reserve(GEP->getNumIndices());
for (User::op_iterator II = GEP->idx_begin(), IE = GEP->idx_end();
II != IE; ++II)
if (ConstantInt *CI = dyn_cast<ConstantInt>(*II))
Indices.push_back(CI->getSExtValue());
else
// We found a non-constant GEP index for this argument? Bail out
// right away, can't promote this argument at all.
return false;
// Indices checked out, mark them as safe
MarkIndicesSafe(Indices, SafeToUnconditionallyLoad);
Indices.clear();
}
} else if (V == Arg) {
// Direct loads are equivalent to a GEP with a single 0 index.
MarkIndicesSafe(IndicesVector(1, 0), SafeToUnconditionallyLoad);
}
}
// Now, iterate all uses of the argument to see if there are any uses that are
// not (GEP+)loads, or any (GEP+)loads that are not safe to promote.
SmallVector<LoadInst*, 16> Loads;
IndicesVector Operands;
for (Value::use_iterator UI = Arg->use_begin(), E = Arg->use_end();
UI != E; ++UI) {
User *U = *UI;
Operands.clear();
if (LoadInst *LI = dyn_cast<LoadInst>(U)) {
if (LI->isVolatile()) return false; // Don't hack volatile loads
Loads.push_back(LI);
// Direct loads are equivalent to a GEP with a zero index and then a load.
Operands.push_back(0);
} else if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(U)) {
if (GEP->use_empty()) {
// Dead GEP's cause trouble later. Just remove them if we run into
// them.
getAnalysis<AliasAnalysis>().deleteValue(GEP);
GEP->eraseFromParent();
// TODO: This runs the above loop over and over again for dead GEPs
// Couldn't we just do increment the UI iterator earlier and erase the
// use?
return isSafeToPromoteArgument(Arg, isByVal);
}
// Ensure that all of the indices are constants.
for (User::op_iterator i = GEP->idx_begin(), e = GEP->idx_end();
i != e; ++i)
if (ConstantInt *C = dyn_cast<ConstantInt>(*i))
Operands.push_back(C->getSExtValue());
else
return false; // Not a constant operand GEP!
// Ensure that the only users of the GEP are load instructions.
for (Value::use_iterator UI = GEP->use_begin(), E = GEP->use_end();
UI != E; ++UI)
if (LoadInst *LI = dyn_cast<LoadInst>(*UI)) {
if (LI->isVolatile()) return false; // Don't hack volatile loads
Loads.push_back(LI);
} else {
// Other uses than load?
return false;
}
} else {
return false; // Not a load or a GEP.
}
// Now, see if it is safe to promote this load / loads of this GEP. Loading
// is safe if Operands, or a prefix of Operands, is marked as safe.
if (!PrefixIn(Operands, SafeToUnconditionallyLoad))
return false;
// See if we are already promoting a load with these indices. If not, check
// to make sure that we aren't promoting too many elements. If so, nothing
// to do.
if (ToPromote.find(Operands) == ToPromote.end()) {
if (maxElements > 0 && ToPromote.size() == maxElements) {
DEBUG(dbgs() << "argpromotion not promoting argument '"
<< Arg->getName() << "' because it would require adding more "
<< "than " << maxElements << " arguments to the function.\n");
// We limit aggregate promotion to only promoting up to a fixed number
// of elements of the aggregate.
return false;
}
ToPromote.insert(Operands);
}
}
if (Loads.empty()) return true; // No users, this is a dead argument.
// Okay, now we know that the argument is only used by load instructions and
// it is safe to unconditionally perform all of them. Use alias analysis to
// check to see if the pointer is guaranteed to not be modified from entry of
// the function to each of the load instructions.
// Because there could be several/many load instructions, remember which
// blocks we know to be transparent to the load.
SmallPtrSet<BasicBlock*, 16> TranspBlocks;
AliasAnalysis &AA = getAnalysis<AliasAnalysis>();
TargetData *TD = getAnalysisIfAvailable<TargetData>();
if (!TD) return false; // Without TargetData, assume the worst.
for (unsigned i = 0, e = Loads.size(); i != e; ++i) {
// Check to see if the load is invalidated from the start of the block to
// the load itself.
LoadInst *Load = Loads[i];
BasicBlock *BB = Load->getParent();
const PointerType *LoadTy =
cast<PointerType>(Load->getPointerOperand()->getType());
unsigned LoadSize =(unsigned)TD->getTypeStoreSize(LoadTy->getElementType());
if (AA.canInstructionRangeModify(BB->front(), *Load, Arg, LoadSize))
return false; // Pointer is invalidated!
// Now check every path from the entry block to the load for transparency.
// To do this, we perform a depth first search on the inverse CFG from the
// loading block.
for (pred_iterator PI = pred_begin(BB), E = pred_end(BB); PI != E; ++PI) {
BasicBlock *P = *PI;
for (idf_ext_iterator<BasicBlock*, SmallPtrSet<BasicBlock*, 16> >
I = idf_ext_begin(P, TranspBlocks),
E = idf_ext_end(P, TranspBlocks); I != E; ++I)
if (AA.canBasicBlockModify(**I, Arg, LoadSize))
return false;
}
}
// If the path from the entry of the function to each load is free of
// instructions that potentially invalidate the load, we can make the
// transformation!
return true;
}
// OperandConvertibleToType - Return true if it is possible to convert operand
// V of User (instruction) U to the specified type. This is true iff it is
// possible to change the specified instruction to accept this. CTMap is a map
// of converted types, so that circular definitions will see the future type of
// the expression, not the static current type.
//
static bool OperandConvertibleToType(User *U, Value *V, const Type *Ty,
ValueTypeCache &CTMap,
const TargetData &TD) {
// if (V->getType() == Ty) return true; // Operand already the right type?
// Expression type must be holdable in a register.
if (!Ty->isFirstClassType())
return false;
Instruction *I = dyn_cast<Instruction>(U);
if (I == 0) return false; // We can't convert!
switch (I->getOpcode()) {
case Instruction::Cast:
assert(I->getOperand(0) == V);
// We can convert the expr if the cast destination type is losslessly
// convertible to the requested type.
// Also, do not change a cast that is a noop cast. For all intents and
// purposes it should be eliminated.
if (!Ty->isLosslesslyConvertibleTo(I->getOperand(0)->getType()) ||
I->getType() == I->getOperand(0)->getType())
return false;
// Do not allow a 'cast ushort %V to uint' to have it's first operand be
// converted to a 'short' type. Doing so changes the way sign promotion
// happens, and breaks things. Only allow the cast to take place if the
// signedness doesn't change... or if the current cast is not a lossy
// conversion.
//
if (!I->getType()->isLosslesslyConvertibleTo(I->getOperand(0)->getType()) &&
I->getOperand(0)->getType()->isSigned() != Ty->isSigned())
return false;
// We also do not allow conversion of a cast that casts from a ptr to array
// of X to a *X. For example: cast [4 x %List *] * %val to %List * *
//
if (const PointerType *SPT =
dyn_cast<PointerType>(I->getOperand(0)->getType()))
if (const PointerType *DPT = dyn_cast<PointerType>(I->getType()))
if (const ArrayType *AT = dyn_cast<ArrayType>(SPT->getElementType()))
if (AT->getElementType() == DPT->getElementType())
return false;
return true;
case Instruction::Add:
if (isa<PointerType>(Ty)) {
Value *IndexVal = I->getOperand(V == I->getOperand(0) ? 1 : 0);
std::vector<Value*> Indices;
if (const Type *ETy = ConvertibleToGEP(Ty, IndexVal, Indices, TD)) {
const Type *RetTy = PointerType::get(ETy);
// Only successful if we can convert this type to the required type
if (ValueConvertibleToType(I, RetTy, CTMap, TD)) {
CTMap[I] = RetTy;
return true;
}
// We have to return failure here because ValueConvertibleToType could
// have polluted our map
return false;
}
}
// FALLTHROUGH
case Instruction::Sub: {
if (!Ty->isInteger() && !Ty->isFloatingPoint()) return false;
Value *OtherOp = I->getOperand((V == I->getOperand(0)) ? 1 : 0);
return ValueConvertibleToType(I, Ty, CTMap, TD) &&
ExpressionConvertibleToType(OtherOp, Ty, CTMap, TD);
}
case Instruction::SetEQ:
case Instruction::SetNE: {
Value *OtherOp = I->getOperand((V == I->getOperand(0)) ? 1 : 0);
return ExpressionConvertibleToType(OtherOp, Ty, CTMap, TD);
}
case Instruction::Shr:
if (Ty->isSigned() != V->getType()->isSigned()) return false;
// FALL THROUGH
case Instruction::Shl:
if (I->getOperand(1) == V) return false; // Cannot change shift amount type
if (!Ty->isInteger()) return false;
return ValueConvertibleToType(I, Ty, CTMap, TD);
case Instruction::Free:
assert(I->getOperand(0) == V);
return isa<PointerType>(Ty); // Free can free any pointer type!
case Instruction::Load:
// Cannot convert the types of any subscripts...
if (I->getOperand(0) != V) return false;
if (const PointerType *PT = dyn_cast<PointerType>(Ty)) {
LoadInst *LI = cast<LoadInst>(I);
const Type *LoadedTy = PT->getElementType();
// They could be loading the first element of a composite type...
if (const CompositeType *CT = dyn_cast<CompositeType>(LoadedTy)) {
unsigned Offset = 0; // No offset, get first leaf.
std::vector<Value*> Indices; // Discarded...
LoadedTy = getStructOffsetType(CT, Offset, Indices, TD, false);
assert(Offset == 0 && "Offset changed from zero???");
}
if (!LoadedTy->isFirstClassType())
return false;
if (TD.getTypeSize(LoadedTy) != TD.getTypeSize(LI->getType()))
return false;
return ValueConvertibleToType(LI, LoadedTy, CTMap, TD);
}
return false;
case Instruction::Store: {
StoreInst *SI = cast<StoreInst>(I);
if (V == I->getOperand(0)) {
ValueTypeCache::iterator CTMI = CTMap.find(I->getOperand(1));
if (CTMI != CTMap.end()) { // Operand #1 is in the table already?
// If so, check to see if it's Ty*, or, more importantly, if it is a
// pointer to a structure where the first element is a Ty... this code
// is necessary because we might be trying to change the source and
// destination type of the store (they might be related) and the dest
// pointer type might be a pointer to structure. Below we allow pointer
// to structures where the 0th element is compatible with the value,
// now we have to support the symmetrical part of this.
//
const Type *ElTy = cast<PointerType>(CTMI->second)->getElementType();
// Already a pointer to what we want? Trivially accept...
if (ElTy == Ty) return true;
// Tricky case now, if the destination is a pointer to structure,
// obviously the source is not allowed to be a structure (cannot copy
// a whole structure at a time), so the level raiser must be trying to
// store into the first field. Check for this and allow it now:
//
if (const StructType *SElTy = dyn_cast<StructType>(ElTy)) {
unsigned Offset = 0;
std::vector<Value*> Indices;
ElTy = getStructOffsetType(ElTy, Offset, Indices, TD, false);
assert(Offset == 0 && "Offset changed!");
if (ElTy == 0) // Element at offset zero in struct doesn't exist!
return false; // Can only happen for {}*
if (ElTy == Ty) // Looks like the 0th element of structure is
return true; // compatible! Accept now!
// Otherwise we know that we can't work, so just stop trying now.
return false;
}
}
// Can convert the store if we can convert the pointer operand to match
// the new value type...
return ExpressionConvertibleToType(I->getOperand(1), PointerType::get(Ty),
CTMap, TD);
} else if (const PointerType *PT = dyn_cast<PointerType>(Ty)) {
const Type *ElTy = PT->getElementType();
assert(V == I->getOperand(1));
if (isa<StructType>(ElTy)) {
// We can change the destination pointer if we can store our first
// argument into the first element of the structure...
//
unsigned Offset = 0;
std::vector<Value*> Indices;
ElTy = getStructOffsetType(ElTy, Offset, Indices, TD, false);
assert(Offset == 0 && "Offset changed!");
if (ElTy == 0) // Element at offset zero in struct doesn't exist!
return false; // Can only happen for {}*
}
// Must move the same amount of data...
if (!ElTy->isSized() ||
TD.getTypeSize(ElTy) != TD.getTypeSize(I->getOperand(0)->getType()))
return false;
// Can convert store if the incoming value is convertible and if the
// result will preserve semantics...
const Type *Op0Ty = I->getOperand(0)->getType();
if (!(Op0Ty->isIntegral() ^ ElTy->isIntegral()) &&
!(Op0Ty->isFloatingPoint() ^ ElTy->isFloatingPoint()))
return ExpressionConvertibleToType(I->getOperand(0), ElTy, CTMap, TD);
}
return false;
}
case Instruction::GetElementPtr:
if (V != I->getOperand(0) || !isa<PointerType>(Ty)) return false;
// If we have a two operand form of getelementptr, this is really little
// more than a simple addition. As with addition, check to see if the
// getelementptr instruction can be changed to index into the new type.
//
if (I->getNumOperands() == 2) {
const Type *OldElTy = cast<PointerType>(I->getType())->getElementType();
unsigned DataSize = TD.getTypeSize(OldElTy);
Value *Index = I->getOperand(1);
Instruction *TempScale = 0;
// If the old data element is not unit sized, we have to create a scale
// instruction so that ConvertibleToGEP will know the REAL amount we are
// indexing by. Note that this is never inserted into the instruction
// stream, so we have to delete it when we're done.
//
if (DataSize != 1) {
Value *CST;
if (Index->getType()->isSigned())
CST = ConstantSInt::get(Index->getType(), DataSize);
else
CST = ConstantUInt::get(Index->getType(), DataSize);
TempScale = BinaryOperator::create(Instruction::Mul, Index, CST);
Index = TempScale;
}
// Check to see if the second argument is an expression that can
// be converted to the appropriate size... if so, allow it.
//
std::vector<Value*> Indices;
const Type *ElTy = ConvertibleToGEP(Ty, Index, Indices, TD);
delete TempScale; // Free our temporary multiply if we made it
if (ElTy == 0) return false; // Cannot make conversion...
return ValueConvertibleToType(I, PointerType::get(ElTy), CTMap, TD);
}
return false;
case Instruction::PHI: {
PHINode *PN = cast<PHINode>(I);
// Be conservative if we find a giant PHI node.
if (PN->getNumIncomingValues() > 32) return false;
for (unsigned i = 0; i < PN->getNumIncomingValues(); ++i)
if (!ExpressionConvertibleToType(PN->getIncomingValue(i), Ty, CTMap, TD))
return false;
return ValueConvertibleToType(PN, Ty, CTMap, TD);
}
case Instruction::Call: {
User::op_iterator OI = find(I->op_begin(), I->op_end(), V);
assert (OI != I->op_end() && "Not using value!");
unsigned OpNum = OI - I->op_begin();
// Are we trying to change the function pointer value to a new type?
if (OpNum == 0) {
const PointerType *PTy = dyn_cast<PointerType>(Ty);
if (PTy == 0) return false; // Can't convert to a non-pointer type...
const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
if (FTy == 0) return false; // Can't convert to a non ptr to function...
// Do not allow converting to a call where all of the operands are ...'s
if (FTy->getNumParams() == 0 && FTy->isVarArg())
return false; // Do not permit this conversion!
// Perform sanity checks to make sure that new function type has the
// correct number of arguments...
//
unsigned NumArgs = I->getNumOperands()-1; // Don't include function ptr
// Cannot convert to a type that requires more fixed arguments than
// the call provides...
//
if (NumArgs < FTy->getNumParams()) return false;
// Unless this is a vararg function type, we cannot provide more arguments
// than are desired...
//
if (!FTy->isVarArg() && NumArgs > FTy->getNumParams())
return false;
// Okay, at this point, we know that the call and the function type match
// number of arguments. Now we see if we can convert the arguments
// themselves. Note that we do not require operands to be convertible,
// we can insert casts if they are convertible but not compatible. The
// reason for this is that we prefer to have resolved functions but casted
// arguments if possible.
//
for (unsigned i = 0, NA = FTy->getNumParams(); i < NA; ++i)
if (!FTy->getParamType(i)->isLosslesslyConvertibleTo(I->getOperand(i+1)->getType()))
return false; // Operands must have compatible types!
// Okay, at this point, we know that all of the arguments can be
// converted. We succeed if we can change the return type if
// necessary...
//
return ValueConvertibleToType(I, FTy->getReturnType(), CTMap, TD);
}
const PointerType *MPtr = cast<PointerType>(I->getOperand(0)->getType());
const FunctionType *FTy = cast<FunctionType>(MPtr->getElementType());
if (!FTy->isVarArg()) return false;
if ((OpNum-1) < FTy->getNumParams())
return false; // It's not in the varargs section...
// If we get this far, we know the value is in the varargs section of the
// function! We can convert if we don't reinterpret the value...
//
return Ty->isLosslesslyConvertibleTo(V->getType());
}
}
return false;
}
bool
nest::SourceTable::get_next_target_data( const thread tid,
const thread rank_start,
const thread rank_end,
thread& source_rank,
TargetData& next_target_data )
{
SourceTablePosition& current_position = current_positions_[ tid ];
// we stay in this loop either until we can return a valid
// TargetData object or we have reached the end of the sources table
while ( true )
{
current_position.wrap_position( sources_ );
if ( current_position.is_at_end() )
{
return false; // reached the end of the sources table
}
// the current position contains an entry, so we retrieve it
const Source& const_current_source =
sources_[ current_position.tid ][ current_position
.syn_id ][ current_position.lcid ];
if ( const_current_source.is_processed()
or const_current_source.is_disabled() )
{
// looks like we've processed this already, let's continue
--current_position.lcid;
continue;
}
source_rank = kernel().mpi_manager.get_process_id_of_gid(
const_current_source.get_gid() );
// determine whether this thread is responsible for this part of
// the MPI buffer; if not we just continue with the next iteration
// of the loop
if ( source_rank < rank_start or source_rank >= rank_end )
{
--current_position.lcid;
continue;
}
Source& current_source =
sources_[ current_position.tid ][ current_position
.syn_id ][ current_position.lcid ];
// we have found a valid entry, so mark it as processed
current_source.set_processed( true );
// we need to set a marker stating whether the entry following this
// entry, if existent, has the same source; start by assuming it
// has a different source, only change if necessary
kernel().connection_manager.set_has_source_subsequent_targets(
current_position.tid,
current_position.syn_id,
current_position.lcid,
false );
if ( ( current_position.lcid + 1
< static_cast< long >(
sources_[ current_position.tid ][ current_position.syn_id ]
.size() )
and sources_[ current_position.tid ][ current_position.syn_id ]
[ current_position.lcid + 1 ].get_gid()
== current_source.get_gid() ) )
{
kernel().connection_manager.set_has_source_subsequent_targets(
current_position.tid,
current_position.syn_id,
current_position.lcid,
true );
}
// decrease the position without returning a TargetData if the
// entry preceding this entry has the same source, but only if
// the preceding entry was not processed yet
if ( ( current_position.lcid - 1 >= 0 )
and ( sources_[ current_position.tid ][ current_position.syn_id ]
[ current_position.lcid - 1 ].get_gid()
== current_source.get_gid() )
and ( not sources_[ current_position.tid ][ current_position.syn_id ]
[ current_position.lcid - 1 ].is_processed() ) )
{
--current_position.lcid;
continue;
}
// otherwise we return a valid TargetData
else
{
// set values of next_target_data
next_target_data.set_source_lid(
kernel().vp_manager.gid_to_lid( current_source.get_gid() ) );
next_target_data.set_source_tid( kernel().vp_manager.vp_to_thread(
kernel().vp_manager.suggest_vp_for_gid( current_source.get_gid() ) ) );
next_target_data.reset_marker();
if ( current_source.is_primary() )
{
next_target_data.set_is_primary( true );
// we store the thread index of the source table, not our own tid!
TargetDataFields& target_fields = next_target_data.target_data;
target_fields.set_tid( current_position.tid );
target_fields.set_syn_id( current_position.syn_id );
target_fields.set_lcid( current_position.lcid );
}
else
{
next_target_data.set_is_primary( false );
const size_t recv_buffer_pos =
kernel().connection_manager.get_secondary_recv_buffer_position(
current_position.tid,
current_position.syn_id,
current_position.lcid );
// convert receive buffer position to send buffer position
// according to buffer layout of MPIAlltoall
const size_t send_buffer_pos =
kernel()
.mpi_manager.recv_buffer_pos_to_send_buffer_pos_secondary_events(
recv_buffer_pos, source_rank );
SecondaryTargetDataFields& secondary_fields =
next_target_data.secondary_data;
secondary_fields.set_send_buffer_pos( send_buffer_pos );
secondary_fields.set_syn_id( current_position.syn_id );
}
--current_position.lcid;
return true; // found a valid entry
}
}
}
static void ConvertOperandToType(User *U, Value *OldVal, Value *NewVal,
ValueMapCache &VMC, const TargetData &TD) {
if (isa<ValueHandle>(U)) return; // Valuehandles don't let go of operands...
if (VMC.OperandsMapped.count(U)) return;
VMC.OperandsMapped.insert(U);
ValueMapCache::ExprMapTy::iterator VMCI = VMC.ExprMap.find(U);
if (VMCI != VMC.ExprMap.end())
return;
Instruction *I = cast<Instruction>(U); // Only Instructions convertible
BasicBlock *BB = I->getParent();
assert(BB != 0 && "Instruction not embedded in basic block!");
std::string Name = I->getName();
I->setName("");
Instruction *Res; // Result of conversion
//std::cerr << endl << endl << "Type:\t" << Ty << "\nInst: " << I
// << "BB Before: " << BB << endl;
// Prevent I from being removed...
ValueHandle IHandle(VMC, I);
const Type *NewTy = NewVal->getType();
Constant *Dummy = (NewTy != Type::VoidTy) ?
Constant::getNullValue(NewTy) : 0;
switch (I->getOpcode()) {
case Instruction::Cast:
if (VMC.NewCasts.count(ValueHandle(VMC, I))) {
// This cast has already had it's value converted, causing a new cast to
// be created. We don't want to create YET ANOTHER cast instruction
// representing the original one, so just modify the operand of this cast
// instruction, which we know is newly created.
I->setOperand(0, NewVal);
I->setName(Name); // give I its name back
return;
} else {
Res = new CastInst(NewVal, I->getType(), Name);
}
break;
case Instruction::Add:
if (isa<PointerType>(NewTy)) {
Value *IndexVal = I->getOperand(OldVal == I->getOperand(0) ? 1 : 0);
std::vector<Value*> Indices;
BasicBlock::iterator It = I;
if (const Type *ETy = ConvertibleToGEP(NewTy, IndexVal, Indices, TD,&It)){
// If successful, convert the add to a GEP
//const Type *RetTy = PointerType::get(ETy);
// First operand is actually the given pointer...
Res = new GetElementPtrInst(NewVal, Indices, Name);
assert(cast<PointerType>(Res->getType())->getElementType() == ETy &&
"ConvertibleToGEP broken!");
break;
}
}
// FALLTHROUGH
case Instruction::Sub:
case Instruction::SetEQ:
case Instruction::SetNE: {
Res = BinaryOperator::create(cast<BinaryOperator>(I)->getOpcode(),
Dummy, Dummy, Name);
VMC.ExprMap[I] = Res; // Add node to expression eagerly
unsigned OtherIdx = (OldVal == I->getOperand(0)) ? 1 : 0;
Value *OtherOp = I->getOperand(OtherIdx);
Res->setOperand(!OtherIdx, NewVal);
Value *NewOther = ConvertExpressionToType(OtherOp, NewTy, VMC, TD);
Res->setOperand(OtherIdx, NewOther);
break;
}
case Instruction::Shl:
case Instruction::Shr:
assert(I->getOperand(0) == OldVal);
Res = new ShiftInst(cast<ShiftInst>(I)->getOpcode(), NewVal,
I->getOperand(1), Name);
break;
case Instruction::Free: // Free can free any pointer type!
assert(I->getOperand(0) == OldVal);
Res = new FreeInst(NewVal);
break;
case Instruction::Load: {
assert(I->getOperand(0) == OldVal && isa<PointerType>(NewVal->getType()));
const Type *LoadedTy =
cast<PointerType>(NewVal->getType())->getElementType();
Value *Src = NewVal;
if (const CompositeType *CT = dyn_cast<CompositeType>(LoadedTy)) {
std::vector<Value*> Indices;
Indices.push_back(Constant::getNullValue(Type::UIntTy));
unsigned Offset = 0; // No offset, get first leaf.
LoadedTy = getStructOffsetType(CT, Offset, Indices, TD, false);
assert(LoadedTy->isFirstClassType());
if (Indices.size() != 1) { // Do not generate load X, 0
// Insert the GEP instruction before this load.
Src = new GetElementPtrInst(Src, Indices, Name+".idx", I);
}
}
Res = new LoadInst(Src, Name);
assert(Res->getType()->isFirstClassType() && "Load of structure or array!");
break;
}
case Instruction::Store: {
if (I->getOperand(0) == OldVal) { // Replace the source value
// Check to see if operand #1 has already been converted...
ValueMapCache::ExprMapTy::iterator VMCI =
VMC.ExprMap.find(I->getOperand(1));
if (VMCI != VMC.ExprMap.end()) {
// Comments describing this stuff are in the OperandConvertibleToType
// switch statement for Store...
//
const Type *ElTy =
cast<PointerType>(VMCI->second->getType())->getElementType();
Value *SrcPtr = VMCI->second;
if (ElTy != NewTy) {
// We check that this is a struct in the initial scan...
const StructType *SElTy = cast<StructType>(ElTy);
std::vector<Value*> Indices;
Indices.push_back(Constant::getNullValue(Type::UIntTy));
unsigned Offset = 0;
const Type *Ty = getStructOffsetType(ElTy, Offset, Indices, TD,false);
assert(Offset == 0 && "Offset changed!");
assert(NewTy == Ty && "Did not convert to correct type!");
// Insert the GEP instruction before this store.
SrcPtr = new GetElementPtrInst(SrcPtr, Indices,
SrcPtr->getName()+".idx", I);
}
Res = new StoreInst(NewVal, SrcPtr);
VMC.ExprMap[I] = Res;
} else {
// Otherwise, we haven't converted Operand #1 over yet...
const PointerType *NewPT = PointerType::get(NewTy);
Res = new StoreInst(NewVal, Constant::getNullValue(NewPT));
VMC.ExprMap[I] = Res;
Res->setOperand(1, ConvertExpressionToType(I->getOperand(1),
NewPT, VMC, TD));
}
} else { // Replace the source pointer
const Type *ValTy = cast<PointerType>(NewTy)->getElementType();
Value *SrcPtr = NewVal;
if (isa<StructType>(ValTy)) {
std::vector<Value*> Indices;
Indices.push_back(Constant::getNullValue(Type::UIntTy));
unsigned Offset = 0;
ValTy = getStructOffsetType(ValTy, Offset, Indices, TD, false);
assert(Offset == 0 && ValTy);
// Insert the GEP instruction before this store.
SrcPtr = new GetElementPtrInst(SrcPtr, Indices,
SrcPtr->getName()+".idx", I);
}
Res = new StoreInst(Constant::getNullValue(ValTy), SrcPtr);
VMC.ExprMap[I] = Res;
Res->setOperand(0, ConvertExpressionToType(I->getOperand(0),
ValTy, VMC, TD));
}
break;
}
case Instruction::GetElementPtr: {
// Convert a one index getelementptr into just about anything that is
// desired.
//
BasicBlock::iterator It = I;
const Type *OldElTy = cast<PointerType>(I->getType())->getElementType();
unsigned DataSize = TD.getTypeSize(OldElTy);
Value *Index = I->getOperand(1);
if (DataSize != 1) {
// Insert a multiply of the old element type is not a unit size...
Value *CST;
if (Index->getType()->isSigned())
CST = ConstantSInt::get(Index->getType(), DataSize);
else
CST = ConstantUInt::get(Index->getType(), DataSize);
Index = BinaryOperator::create(Instruction::Mul, Index, CST, "scale", It);
}
// Perform the conversion now...
//
std::vector<Value*> Indices;
const Type *ElTy = ConvertibleToGEP(NewVal->getType(),Index,Indices,TD,&It);
assert(ElTy != 0 && "GEP Conversion Failure!");
Res = new GetElementPtrInst(NewVal, Indices, Name);
assert(Res->getType() == PointerType::get(ElTy) &&
"ConvertibleToGet failed!");
}
#if 0
if (I->getType() == PointerType::get(Type::SByteTy)) {
// Convert a getelementptr sbyte * %reg111, uint 16 freely back to
// anything that is a pointer type...
//
BasicBlock::iterator It = I;
// Check to see if the second argument is an expression that can
// be converted to the appropriate size... if so, allow it.
//
std::vector<Value*> Indices;
const Type *ElTy = ConvertibleToGEP(NewVal->getType(), I->getOperand(1),
Indices, TD, &It);
assert(ElTy != 0 && "GEP Conversion Failure!");
Res = new GetElementPtrInst(NewVal, Indices, Name);
} else {
// Convert a getelementptr ulong * %reg123, uint %N
// to getelementptr long * %reg123, uint %N
// ... where the type must simply stay the same size...
//
GetElementPtrInst *GEP = cast<GetElementPtrInst>(I);
std::vector<Value*> Indices(GEP->idx_begin(), GEP->idx_end());
Res = new GetElementPtrInst(NewVal, Indices, Name);
}
#endif
break;
case Instruction::PHI: {
PHINode *OldPN = cast<PHINode>(I);
PHINode *NewPN = new PHINode(NewTy, Name);
VMC.ExprMap[I] = NewPN;
while (OldPN->getNumOperands()) {
BasicBlock *BB = OldPN->getIncomingBlock(0);
Value *OldVal = OldPN->getIncomingValue(0);
ValueHandle OldValHandle(VMC, OldVal);
OldPN->removeIncomingValue(BB, false);
Value *V = ConvertExpressionToType(OldVal, NewTy, VMC, TD);
NewPN->addIncoming(V, BB);
}
Res = NewPN;
break;
}
case Instruction::Call: {
Value *Meth = I->getOperand(0);
std::vector<Value*> Params(I->op_begin()+1, I->op_end());
if (Meth == OldVal) { // Changing the function pointer?
const PointerType *NewPTy = cast<PointerType>(NewVal->getType());
const FunctionType *NewTy = cast<FunctionType>(NewPTy->getElementType());
if (NewTy->getReturnType() == Type::VoidTy)
Name = ""; // Make sure not to name a void call!
// Get an iterator to the call instruction so that we can insert casts for
// operands if need be. Note that we do not require operands to be
// convertible, we can insert casts if they are convertible but not
// compatible. The reason for this is that we prefer to have resolved
// functions but casted arguments if possible.
//
BasicBlock::iterator It = I;
// Convert over all of the call operands to their new types... but only
// convert over the part that is not in the vararg section of the call.
//
for (unsigned i = 0; i != NewTy->getNumParams(); ++i)
if (Params[i]->getType() != NewTy->getParamType(i)) {
// Create a cast to convert it to the right type, we know that this
// is a lossless cast...
//
Params[i] = new CastInst(Params[i], NewTy->getParamType(i),
"callarg.cast." +
Params[i]->getName(), It);
}
Meth = NewVal; // Update call destination to new value
} else { // Changing an argument, must be in vararg area
std::vector<Value*>::iterator OI =
find(Params.begin(), Params.end(), OldVal);
assert (OI != Params.end() && "Not using value!");
*OI = NewVal;
}
Res = new CallInst(Meth, Params, Name);
break;
}
default:
assert(0 && "Expression convertible, but don't know how to convert?");
return;
}
// If the instruction was newly created, insert it into the instruction
// stream.
//
BasicBlock::iterator It = I;
assert(It != BB->end() && "Instruction not in own basic block??");
BB->getInstList().insert(It, Res); // Keep It pointing to old instruction
DEBUG(std::cerr << "COT CREATED: " << (void*)Res << " " << *Res
<< "In: " << (void*)I << " " << *I << "Out: " << (void*)Res
<< " " << *Res);
// Add the instruction to the expression map
VMC.ExprMap[I] = Res;
if (I->getType() != Res->getType())
ConvertValueToNewType(I, Res, VMC, TD);
else {
bool FromStart = true;
Value::use_iterator UI;
while (1) {
if (FromStart) UI = I->use_begin();
if (UI == I->use_end()) break;
if (isa<ValueHandle>(*UI)) {
++UI;
FromStart = false;
} else {
User *U = *UI;
if (!FromStart) --UI;
U->replaceUsesOfWith(I, Res);
if (!FromStart) ++UI;
}
}
}
}
