TEST(EventBaseTest, RunInThread) {
uint32_t numThreads = 50;
uint32_t opsPerThread = 100;
RunInThreadData data(numThreads, opsPerThread);
deque<std::thread> threads;
for (uint32_t i = 0; i < numThreads; ++i) {
threads.emplace_back([i, &data] {
for (int n = 0; n < data.opsPerThread; ++n) {
RunInThreadArg* arg = new RunInThreadArg(&data, i, n);
data.evb.runInEventBaseThread(runInThreadTestFunc, arg);
usleep(10);
}
});
}
// Add a timeout event to run after 3 seconds.
// Otherwise loop() will return immediately since there are no events to run.
// Once the last thread exits, it will stop the loop(). However, this
// timeout also stops the loop in case there is a bug performing the normal
// stop.
data.evb.tryRunAfterDelay(std::bind(&EventBase::terminateLoopSoon, &data.evb),
3000);
TimePoint start;
data.evb.loop();
TimePoint end;
// Verify that the loop exited because all threads finished and requested it
// to stop. This should happen much sooner than the 3 second timeout.
// Assert that it happens in under a second. (This is still tons of extra
// padding.)
auto timeTaken = std::chrono::duration_cast<milliseconds>(
end.getTime() - start.getTime());
ASSERT_LT(timeTaken.count(), 1000);
VLOG(11) << "Time taken: " << timeTaken.count();
// Verify that we have all of the events from every thread
int expectedValues[numThreads];
for (uint32_t n = 0; n < numThreads; ++n) {
expectedValues[n] = 0;
}
for (deque< pair<int, int> >::const_iterator it = data.values.begin();
it != data.values.end();
++it) {
int threadID = it->first;
int value = it->second;
ASSERT_EQ(expectedValues[threadID], value);
++expectedValues[threadID];
}
for (uint32_t n = 0; n < numThreads; ++n) {
ASSERT_EQ(expectedValues[n], opsPerThread);
}
// Wait on all of the threads.
for (auto& thread: threads) {
thread.join();
}
}
// instanciate and play with gates
TEST(ALibxx, ChronoTest){
using namespace Davix::Chrono;
TimePoint pp;
ASSERT_EQ(0, pp.toTimestamp());
pp = Clock(Clock::Monolitic).now();
TimePoint copy_time = pp;
ASSERT_EQ(pp, copy_time);
copy_time = copy_time + Duration(5);
ASSERT_NE(copy_time, pp);
ASSERT_EQ(copy_time, pp + Duration(5));
ASSERT_GE(copy_time, pp);
ASSERT_GE(copy_time, pp + Duration(5));
ASSERT_GT(copy_time, pp);
ASSERT_LE(copy_time, pp + Duration(5));
ASSERT_LE(copy_time, pp + Duration(10));
ASSERT_LT(copy_time, pp + Duration(10));
ASSERT_EQ(copy_time + Duration(5), pp + Duration(10));
copy_time = pp;
ASSERT_EQ(copy_time, pp + Duration(10) - Duration(20) + Duration(10));
TimePoint dd;
ASSERT_ANY_THROW(
Duration res = dd - pp;
);
// Print the spatial entities corresponding to the given time point and of the requested type
void printSpatialEntities(TimePoint &timePoint, const SubsetSpecificType &spatialEntityType) {
for (auto it = timePoint.getSpatialEntitiesBeginIterator(spatialEntityType);
it != timePoint.getSpatialEntitiesEndIterator(spatialEntityType); it++) {
std::cout << "\t SpatialEntity" << std::endl;
std::cout << (*(*it)).toString() << std::endl;
}
}
void
SpatialTemporalDataReader::setTimePointValue(const pt::ptree &timePointTree, TimePoint &timePoint) {
double timePointValue;
if (timePointHasValue(timePointTree, timePointValue)) {
timePoint.setValue(timePointValue);
} else {
timePoint.setValue(std::numeric_limits<double>::max());
}
}
void TimeLine::addPoint(ofPoint _pos){
if ( (startTime == -1) || (points.size() == 0) ){
startTime = ofGetElapsedTimef();
}
TimePoint newPoint;
newPoint.set(_pos);
newPoint.time = ofGetElapsedTimef() - startTime;
points.push_back( newPoint );
}
/**
* Test destroying a registered EventHandler
*/
TEST(EventBaseTest, DestroyHandler) {
class DestroyHandler : public AsyncTimeout {
public:
DestroyHandler(EventBase* eb, EventHandler* h)
: AsyncTimeout(eb)
, handler_(h) {}
virtual void timeoutExpired() noexcept {
delete handler_;
}
private:
EventHandler* handler_;
};
EventBase eb;
SocketPair sp;
// Fill up the write buffer before starting
size_t initialBytesWritten = writeUntilFull(sp[0]);
// Register for write events
TestHandler* handler = new TestHandler(&eb, sp[0]);
handler->registerHandler(EventHandler::WRITE | EventHandler::PERSIST);
// After 10ms, read some data, so that the handler
// will be notified that it can write.
eb.tryRunAfterDelay(std::bind(checkReadUntilEmpty, sp[1], initialBytesWritten),
10);
// Start a timer to destroy the handler after 25ms
// This mainly just makes sure the code doesn't break or assert
DestroyHandler dh(&eb, handler);
dh.scheduleTimeout(25);
TimePoint start;
eb.loop();
TimePoint end;
// Make sure the EventHandler was uninstalled properly when it was
// destroyed, and the EventBase loop exited
T_CHECK_TIMEOUT(start, end, milliseconds(25));
// Make sure that the handler wrote data to the socket
// before it was destroyed
size_t bytesRemaining = readUntilEmpty(sp[1]);
ASSERT_GT(bytesRemaining, 0);
}
int TimePoint::getTimeDiffInMinute(const TimePoint &another) const
{
int diff = convertToMinute() - another.convertToMinute();
if(diff < 0)
diff = -diff;
return diff;
}
//---------------------------------------------------------------------------
void getMeanAndStdErrorEndPoint(const std::vector<TimeSeries>& timeSeries, TimePoint& mean, TimePoint& stdError)
{
assert(mean.isNull()==true);
assert(stdError.isNull()==true);
//Only set: biasA, biasB, fractionMixedPairs
const unsigned int nTimeSeries = timeSeries.size();
for (unsigned i=0; i<nTimeSeries; ++i)
{
//Get the index of the final index
const unsigned int time = timeSeries[i].timePoints.size() - 1;
mean += timeSeries[i].timePoints[time];
}
mean/=nTimeSeries;
}
inline void setAnimationTime(const TimePoint& timePoint) {
if (mode == MapMode::Still) {
return;
}
animationTime = timePoint.time_since_epoch();
};
static inline int32 timeSeed()
{
using namespace chrono;
static int32 count = 0;
typedef high_resolution_clock::time_point TimePoint;
typedef TimePoint::duration Duration;
TimePoint now = high_resolution_clock::now();
Duration sinceEpoch = now.time_since_epoch();
seconds secs = duration_cast<seconds>(sinceEpoch);
nanoseconds nsecs = sinceEpoch - secs;
return (int32)secs.count() ^ (int32)nsecs.count() ^ count--;
}
// Print the given time point
void printTimePoint(TimePoint &timePoint) {
std::cout << "Time point " << timePoint.getValue() << std::endl;
for (std::size_t i = 0; i < NR_SUBSET_SPECIFIC_TYPES; i++) {
std::cout << "Subset specific type " << i << ": " << std::endl;
printSpatialEntities(timePoint, subsetspecific::computeSubsetSpecificType(i));
}
}
const synfig::Node::time_set & ValueNode_DynamicList::ListEntry::get_times() const
{
synfig::ActivepointList::const_iterator j = timing_info.begin(),
end = timing_info.end();
//must remerge with all the other values because we don't know if we've changed...
times = value_node->get_times();
for(; j != end; ++j)
{
TimePoint t;
t.set_time(j->get_time());
t.set_guid(j->get_guid());
times.insert(t);
}
return times;
}
static inline int64 OSCTime(TimePoint const & tp)
{
using namespace chrono;
typedef typename TimePoint::duration Duration;
Duration sinceEpoch = tp.time_since_epoch();
seconds secs = duration_cast<seconds>(sinceEpoch);
nanoseconds nsecs = sinceEpoch - secs;
return ((int64)(secs.count() + kSECONDS_FROM_1900_to_1970) << 32)
+ (int64)(nsecs.count() * kNanosToOSCunits);
}
void
SpatialTemporalDataReader::addSpatialEntityToTimePoint(const pt::ptree &spatialEntityTree,
TimePoint &timePoint) {
std::shared_ptr<SpatialEntity> spatialEntity;
SubsetSpecificType spatialEntityType;
createDerivedSpatialEntity(spatialEntityTree, spatialEntity, spatialEntityType);
setSpatialEntityScaleAndSubsystem(spatialEntityTree, spatialEntity);
setSpatialEntityMeasureValues(spatialEntityTree, spatialEntity);
timePoint.addSpatialEntityAndType(spatialEntity, spatialEntityType);
}
void TemporalDataReader::addNumericStateVariablesToTimePoint(const std::vector<std::string> &lineTokens,
TimePoint &timePoint) {
std::size_t nrOfTokens = lineTokens.size();
for (std::size_t i = 1; i < nrOfTokens; i++) {
double observableVariableValue = StringManipulator::convert<double>(lineTokens[i]);
timePoint.addNumericStateVariable(
numericStateVariableIds[i],
observableVariableValue
);
}
}
jobject mdr::JniStationPrediction::createJniStationPrediction(JNIEnv *env,
TimePoint timePoint,
float value,
std::string timeZone) {
auto duration = timePoint.time_since_epoch();
auto epoch = std::chrono::duration_cast<std::chrono::milliseconds>(duration).count();
jlong jniEpoch = static_cast<jlong>(epoch);
jobject jniValue = mdr::JniFloat::toJni(env, value);
jstring tz = mdr::JniString::toJni(env, timeZone);
auto retVal = env->CallStaticObjectMethod(stationPredictionFactoryClass, factoryCtor, jniEpoch,
tz, jniValue);
mdr::Jni::checkException(env, true);
return retVal;
}
bool checkTimeout(
const TimePoint& start,
const TimePoint& end,
nanoseconds expected,
bool allowSmaller,
nanoseconds tolerance) {
auto elapsedTime = end.getTimeStart() - start.getTimeEnd();
if (!allowSmaller) {
// Timeouts should never fire before the time was up.
// Allow 1ms of wiggle room for rounding errors.
if (elapsedTime < (expected - milliseconds(1))) {
return false;
}
}
// Check that the event fired within a reasonable time of the timout.
//
// If the system is under heavy load, our process may have had to wait for a
// while to be run. The time spent waiting for the processor shouldn't
// count against us, so exclude this time from the check.
nanoseconds timeExcluded;
if (end.getTid() != start.getTid()) {
// We can only correctly compute the amount of time waiting to be scheduled
// if both TimePoints were set in the same thread.
timeExcluded = nanoseconds(0);
} else {
timeExcluded = end.getTimeWaiting() - start.getTimeWaiting();
assert(end.getTimeWaiting() >= start.getTimeWaiting());
// Add a tolerance here due to precision issues on linux, see below note.
assert((elapsedTime + tolerance) >= timeExcluded);
}
nanoseconds effectiveElapsedTime(0);
if (elapsedTime > timeExcluded) {
effectiveElapsedTime = elapsedTime - timeExcluded;
}
// On x86 Linux, sleep calls generally have precision only to the nearest
// millisecond. The tolerance parameter lets users allow a few ms of slop.
auto overrun = effectiveElapsedTime - expected;
if (overrun > tolerance) {
return false;
}
return true;
}
/**
* Test the behavior of tryRunAfterDelay() when some timeouts are
* still scheduled when the EventBase is destroyed.
*/
TEST(EventBaseTest, RunAfterDelayDestruction) {
TimePoint timestamp1(false);
TimePoint timestamp2(false);
TimePoint timestamp3(false);
TimePoint timestamp4(false);
TimePoint start(false);
TimePoint end(false);
{
EventBase eb;
// Run two normal timeouts
eb.tryRunAfterDelay(std::bind(&TimePoint::reset, ×tamp1), 10);
eb.tryRunAfterDelay(std::bind(&TimePoint::reset, ×tamp2), 20);
// Schedule a timeout to stop the event loop after 40ms
eb.tryRunAfterDelay(std::bind(&EventBase::terminateLoopSoon, &eb), 40);
// Schedule 2 timeouts that would fire after the event loop stops
eb.tryRunAfterDelay(std::bind(&TimePoint::reset, ×tamp3), 80);
eb.tryRunAfterDelay(std::bind(&TimePoint::reset, ×tamp4), 160);
start.reset();
eb.loop();
end.reset();
}
T_CHECK_TIMEOUT(start, timestamp1, milliseconds(10));
T_CHECK_TIMEOUT(start, timestamp2, milliseconds(20));
T_CHECK_TIMEOUT(start, end, milliseconds(40));
ASSERT_TRUE(timestamp3.isUnset());
ASSERT_TRUE(timestamp4.isUnset());
// Ideally this test should be run under valgrind to ensure that no
// memory is leaked.
}
void
SpatialTemporalDataReader::addNumericStateVariableToTimePoint(const pt::ptree &numericStateVariableTree,
TimePoint &timePoint) {
std::string name
= numericStateVariableTree.get<std::string>(LABEL_NUMERIC_STATE_VARIABLE_NAME);
boost::optional<std::string> scaleAndSubsystem
= numericStateVariableTree.get_optional<std::string>(LABEL_NUMERIC_STATE_VARIABLE_SCALE_AND_SUBSYSTEM);
double value
= numericStateVariableTree.get<double>(LABEL_NUMERIC_STATE_VARIABLE_VALUE);
NumericStateVariableId numericStateVariableId(
name,
scaleAndSubsystem.get_value_or(ScaleAndSubsystem::DEFAULT_VALUE)
);
timePoint.addNumericStateVariable(numericStateVariableId, value);
}
void readMDXVelocityField(const string &filename, TimePoint &timePoint, const Mesh3d &mesh, double time) {
ifstream input(filename);
double unusedTime; //TODO: Should this be thrown out?
input >> unusedTime; // unused
if (time != unusedTime) {
cout << "Warning: File " << filename << " Specifies time " << unusedTime << ", using " << time << " instead." << endl;
}
timePoint.time = time;
timePoint.resize(mesh.points.size());
cout << "Reading velocities from " << filename << endl;
readMDXPoints(timePoint.velocities, input, mesh.points.size());
cout<<" Velocities were read succesfully " <<endl;
calculateVorticityMesh(mesh, timePoint);
cout<<" Vorticities were calculated succesfully " <<endl;
#ifdef DUMP_MSH
writeMshFile(filename + "_out.msh", mesh, timePoint);
cout<<" Dumped msh file to " << filename << "_out.msh" << endl;
#endif
}
void TemporalDataReader::setTimePointValue(const std::vector<std::string> &lineTokens,
TimePoint &timePoint) {
double timePointValue = StringManipulator::convert<double>(lineTokens[0]);
timePoint.setValue(timePointValue);
}
static inline double secondsSinceEpoch(TimePoint const & tp)
{
return chrono::duration_cast<chrono::nanoseconds>(tp.time_since_epoch()).count() * 1e-9;
}
TimerId Evloop::runEvery(double secs , AlarmCallback&& acb)
{
TimePoint tp = TimePoint::now();
tp.addSeconds(secs);
return timerQueue_->addTimer(tp , std::move(acb) , secs);
}
TimerId Evloop::runEvery(double secs , const AlarmCallback& acb)
{
TimePoint tp = TimePoint::now();
tp.addSeconds(secs);
return timerQueue_->addTimer(tp , acb , secs);
}
int main(void)
{
int caseId, numEvent, hour, minute, diff;
vector<TimePeriod> events;
char desc[MAX_LEN + 1];
int maxInd, maxMinute;
TimePoint endP(18, 0);
TimePoint startP(10, 0);
TimePeriod endPeriod(endP, endP);
TimePeriod startPeriod(startP, startP);
//freopen("in.txt", "r", stdin);
caseId = 1;
while(scanf("%d", &numEvent) > 0)
{
gets(desc);
events.clear();
events.push_back(startPeriod);
for(int i = 0; i < numEvent; i++)
{
scanf("%d:%d", &hour, &minute);
TimePoint mStart(hour, minute);
scanf("%d:%d", &hour, &minute);
TimePoint mEnd(hour, minute);
events.push_back(TimePeriod(mStart, mEnd));
gets(desc);
}
events.push_back(endPeriod);
numEvent += 2;
sort(events.begin(), events.end());
maxInd = 0;
maxMinute = 0;
for(int i = 0; i < numEvent - 1; i++)
{
diff = events[i].getDistanceInMinute(events[i + 1]);
if(diff > maxMinute)
{
maxMinute = diff;
maxInd = i;
}
}
TimePoint result;
result.getTimePointFromMinute(maxMinute);
printf("Day #%d: the longest nap starts at %d:%02d and will last for ", caseId,
events[maxInd].getEndP().getHour(), events[maxInd].getEndP().getMinute());
if(result.getHour() != 0)
printf("%d hours and ", result.getHour());
printf("%d minutes.\n", result.getMinute());
caseId++;
}
return 0;
}
inline int TimePeriod::getDistanceInMinute(const TimePeriod & another) const
{
return _endP.getTimeDiffInMinute(another._startP);
}
inline bool TimePoint::operator< (const TimePoint & another) const
{
return convertToMinute() < another.convertToMinute();
}
void
CellRenderer_TimeTrack::render_vfunc(
const ::Cairo::RefPtr< ::Cairo::Context>& cr,
Gtk::Widget& /* widget */,
const Gdk::Rectangle& /* background_area */,
const Gdk::Rectangle& cell_area,
Gtk::CellRendererState /* flags */)
{
if(!cr)
return;
Glib::RefPtr<Gtk::Adjustment> adjustment=get_adjustment();
// Gtk::StateType state = Gtk::STATE_ACTIVE;
// Gtk::ShadowType shadow;
Gdk::Color
change_time_color("#008800"),
curr_time_color("#0000ff"),
inactive_color("#000000"),
keyframe_color("#a07f7f");
Gdk::Color activepoint_color[2];
activepoint_color[0]=Gdk::Color("#ff0000");
activepoint_color[1]=Gdk::Color("#00ff00");
synfig::Canvas::Handle canvas(property_canvas().get_value());
synfigapp::ValueDesc value_desc = property_value_desc().get_value();
synfig::ValueNode *base_value = value_desc.get_value_node().get();
// synfig::ValueNode_Animated *value_node=dynamic_cast<synfig::ValueNode_Animated*>(base_value);
synfig::ValueNode_DynamicList *parent_value_node(0);
if(property_value_desc().get_value().parent_is_value_node())
parent_value_node=dynamic_cast<synfig::ValueNode_DynamicList*>(property_value_desc().get_value().get_parent_value_node().get());
// If the canvas is defined, then load up the keyframes
if(canvas)
{
const synfig::KeyframeList& keyframe_list(canvas->keyframe_list());
synfig::KeyframeList::const_iterator iter;
for(iter=keyframe_list.begin();iter!=keyframe_list.end();++iter)
{
if(!iter->get_time().is_valid())
continue;
const int x((int)((float)cell_area.get_width()/(adjustment->get_upper()-adjustment->get_lower())*(iter->get_time()-adjustment->get_lower())));
if(iter->get_time()>=adjustment->get_lower() && iter->get_time()<adjustment->get_upper())
{
cr->set_source_rgb(keyframe_color.get_red_p(), keyframe_color.get_green_p(), keyframe_color.get_blue_p());
cr->rectangle(cell_area.get_x()+x, cell_area.get_y(), 1, cell_area.get_height()+1);
cr->fill();
}
}
}
const synfig::Time time_offset = get_time_offset_from_vdesc(value_desc);
const synfig::Time time_dilation = get_time_dilation_from_vdesc(value_desc);
Gdk::Rectangle area(cell_area);
float lower = adjustment->get_lower(),
upper = adjustment->get_upper();
//render time points where value changed
{
std::set<Time> times;
get_change_times_from_vdesc(value_desc, times);
for(std::set<Time>::const_iterator i = times.begin(); i != times.end(); ++i)
{
//find the coordinate in the drawable space...
Time t_orig = *i;
if(!t_orig.is_valid()) continue;
Time t = t_orig - time_offset;
if (time_dilation!=0)
t = t / time_dilation;
if(t<adjustment->get_lower() || t>adjustment->get_upper()) continue;
const int w = 1;
const int h = (area.get_height() - 2)/2;
const int x = area.get_x() + (int)((t-lower)*area.get_width()/(upper-lower));
const int y = area.get_y() + (area.get_height() - h)/2;
cr->rectangle(x, y, w, h);
cr->set_source_rgb(
change_time_color.get_red_p(),
change_time_color.get_green_p(),
change_time_color.get_blue_p() );
cr->fill();
}
}
//render all the time points that exist
{
const synfig::Node::time_set *tset = get_times_from_vdesc(value_desc);
if(tset)
{
synfig::Node::time_set::const_iterator i = tset->begin(), end = tset->end();
bool valselected = sel_value.get_value_node() == base_value && !sel_times.empty();
float cfps = get_canvas()->rend_desc().get_frame_rate();
vector<Time> drawredafter;
Time diff = actual_time - actual_dragtime;//selected_time-drag_time;
for(; i != end; ++i)
{
//find the coordinate in the drawable space...
Time t_orig = i->get_time();
if(!t_orig.is_valid()) continue;
Time t = t_orig - time_offset;
if (time_dilation!=0)
t = t / time_dilation;
if(t<adjustment->get_lower() || t>adjustment->get_upper()) continue;
//if it found it... (might want to change comparison, and optimize
// sel_times.find to not produce an overall nlogn solution)
bool selected=false;
//not dragging... just draw as per normal
//if move dragging draw offset
//if copy dragging draw both...
if(valselected && sel_times.find(t_orig) != sel_times.end())
{
if(dragging) //skip if we're dragging because we'll render it later
{
if(mode & COPY_MASK) // draw both blue and red moved
{
drawredafter.push_back(t + diff.round(cfps));
}else if(mode & DELETE_MASK) //it's just red...
{
selected=true;
}else //move - draw the red on top of the others...
{
drawredafter.push_back(t + diff.round(cfps));
continue;
}
}else
{
selected=true;
}
}
//synfig::info("Displaying time: %.3f s",(float)t);
const int x = (int)((t-lower)*area.get_width()/(upper-lower));
//should draw me a grey filled circle...
Gdk::Rectangle area2(
area.get_x() - area.get_height()/2 + x + 1,
area.get_y() + 1,
area.get_height()-2,
area.get_height()-2
);
if (time_dilation!=0)
{
TimePoint tp = *i;
tp.set_time((tp.get_time() - time_offset) / time_dilation);
render_time_point_to_window(cr,area2,tp,selected);
}
}
{
vector<Time>::iterator i = drawredafter.begin(), end = drawredafter.end();
for(; i != end; ++i)
{
//find the coordinate in the drawable space...
Time t = *i;
if(!t.is_valid())
continue;
//synfig::info("Displaying time: %.3f s",(float)t);
const int x = (int)((t-lower)*area.get_width()/(upper-lower));
//should draw me a grey filled circle...
Gdk::Rectangle area2(
area.get_x() - area.get_height()/2 + x + 1,
area.get_y() + 1,
area.get_height()-2,
area.get_height()-2
);
render_time_point_to_window(cr,area2,*i,true);
}
}
}
}
// If the parent of this value node is a dynamic list, then
// render the on and off times
if(parent_value_node)
{
const int index(property_value_desc().get_value().get_index());
const synfig::ValueNode_DynamicList::ListEntry& list_entry(parent_value_node->list[index]);
const synfig::ValueNode_DynamicList::ListEntry::ActivepointList& activepoint_list(list_entry.timing_info);
synfig::ValueNode_DynamicList::ListEntry::ActivepointList::const_iterator iter,next;
bool is_off(false);
if(!activepoint_list.empty())
is_off=!activepoint_list.front().state;
int xstart(0);
int x=0 /*,prevx=0*/;
for(next=activepoint_list.begin(),iter=next++;iter!=activepoint_list.end();iter=next++)
{
x=((int)((float)area.get_width()/(adjustment->get_upper()-adjustment->get_lower())*(iter->time-adjustment->get_lower())));
if(x<0)x=0;
if(x>area.get_width())x=area.get_width();
bool status_at_time=0;
if(next!=activepoint_list.end())
{
status_at_time=!list_entry.status_at_time((iter->time+next->time)/2.0);
}
else
status_at_time=!list_entry.status_at_time(Time::end());
if(!is_off && status_at_time)
{
xstart=x;
is_off=true;
}
else
if(is_off && !status_at_time)
{
// render the off time has a dashed line
draw_activepoint_off(cr, inactive_color, area.get_height()*2,
area.get_x()+xstart,
area.get_y(),
x-xstart,
area.get_y());
is_off=false;
}
if(iter->time>=adjustment->get_lower() && iter->time<adjustment->get_upper())
{
int w(1);
if(selected==*iter)
w=3;
cr->set_source_rgb( activepoint_color[iter->state].get_red_p(),
activepoint_color[iter->state].get_green_p(),
activepoint_color[iter->state].get_red_p() );
cr->rectangle(area.get_x()+x-w/2, area.get_y(), w, area.get_height());
cr->fill();
}
//prevx=x;
}
if(is_off)
{
// render the off time has a dashed line
draw_activepoint_off(cr, inactive_color, area.get_height()*2,
area.get_x()+xstart,
area.get_y(),
area.get_width()-xstart,
area.get_y());
}
}
// Render a line that defines the current tick in time
{
const int x((int)((float)area.get_width()/(adjustment->get_upper()-adjustment->get_lower())*(adjustment->get_value()-adjustment->get_lower())));
if(adjustment->get_value()>=adjustment->get_lower() && adjustment->get_value()<adjustment->get_upper())
{
cr->set_source_rgb( curr_time_color.get_red_p(),
curr_time_color.get_green_p(),
curr_time_color.get_red_p() );
cr->rectangle(area.get_x()+x, area.get_y(), 1, area.get_height());
cr->fill();
}
}
}
inline void print_ms(const TimePoint<Ms>& time_point)
{
std::cout << time_point.time_since_epoch().count() << " ms\n";
}
