bool DIALOG_TARGET_PROPERTIES::TransferDataFromWindow()
{
// Zero-size targets are hard to see/select.
if( !m_Size.Validate( Mils2iu( 1 ), INT_MAX ) )
return false;
BOARD_COMMIT commit( m_Parent );
commit.Modify( m_Target );
if( m_DC )
m_Target->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
// Save old item in undo list, if is is not currently edited (will be later if so)
bool pushCommit = ( m_Target->GetFlags() == 0 );
if( m_Target->GetFlags() != 0 ) // other edit in progress (MOVE, NEW ..)
m_Target->SetFlags( IN_EDIT ); // set flag in edit to force
// undo/redo/abort proper operation
m_Target->SetWidth( m_Thickness.GetValue() );
m_Target->SetSize( m_Size.GetValue() );
m_Target->SetShape( m_TargetShape->GetSelection() ? 1 : 0 );
if( m_DC )
m_Target->Draw( m_Parent->GetCanvas(), m_DC, ( m_Target->IsMoving() ) ? GR_XOR : GR_OR );
if( pushCommit )
commit.Push( _( "Modified alignment target" ) );
return true;
}
bool DIALOG_TARGET_PROPERTIES::TransferDataToWindow()
{
m_Size.SetValue( m_Target->GetSize() );
m_Thickness.SetValue( m_Target->GetWidth() );
m_TargetShape->SetSelection( m_Target->GetShape() ? 1 : 0 );
return true;
}
bool DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataToWindow()
{
m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );
m_cornerRadius.SetValue( m_settings.GetCornerRadius() );
m_minWidth.SetValue( m_settings.m_ZoneMinThickness );
m_ConstrainOpt->SetValue( m_settings.m_Zone_45_Only );
switch( m_settings.m_Zone_HatchingStyle )
{
case ZONE_CONTAINER::NO_HATCH: m_OutlineAppearanceCtrl->SetSelection( 0 ); break;
case ZONE_CONTAINER::DIAGONAL_EDGE: m_OutlineAppearanceCtrl->SetSelection( 1 ); break;
case ZONE_CONTAINER::DIAGONAL_FULL: m_OutlineAppearanceCtrl->SetSelection( 2 ); break;
}
SetInitialFocus( m_OutlineAppearanceCtrl );
switch( m_settings.m_FillMode )
{
case ZFM_HATCH_PATTERN:
m_GridStyleCtrl->SetSelection( 1 ); break;
default:
m_GridStyleCtrl->SetSelection( 0 ); break;
}
m_gridStyleRotation.SetUnits( DEGREES );
m_gridStyleRotation.SetValue( m_settings.m_HatchFillTypeOrientation*10 ); // IU is decidegree
// Gives a reasonable value to grid style parameters, if currently there are no defined
// parameters for grid pattern thickness and gap (if the value is 0)
// the grid pattern thickness default value is (arbitrary) m_ZoneMinThickness * 4
// or 1mm
// the grid pattern gap default value is (arbitrary) m_ZoneMinThickness * 6
// or 1.5 mm
int bestvalue = m_settings.m_HatchFillTypeThickness;
if( bestvalue <= 0 ) // No defined value for m_HatchFillTypeThickness
bestvalue = std::max( m_settings.m_ZoneMinThickness * 4, Millimeter2iu( 1.0 ) );
m_gridStyleThickness.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );
bestvalue = m_settings.m_HatchFillTypeGap;
if( bestvalue <= 0 ) // No defined value for m_HatchFillTypeGap
bestvalue = std::max( m_settings.m_ZoneMinThickness * 6, Millimeter2iu( 1.5 ) );
m_gridStyleGap.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );
m_spinCtrlSmoothLevel->SetValue( m_settings.m_HatchFillTypeSmoothingLevel );
m_spinCtrlSmoothValue->SetValue( m_settings.m_HatchFillTypeSmoothingValue );
// Enable/Disable some widgets
wxCommandEvent event;
OnStyleSelection( event );
return true;
}
bool DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataFromWindow()
{
m_settings.SetCornerSmoothingType( m_cornerSmoothingChoice->GetSelection() );
m_settings.SetCornerRadius( m_settings.GetCornerSmoothingType() == ZONE_SETTINGS::SMOOTHING_NONE
? 0 : m_cornerRadius.GetValue() );
if( !m_gridStyleRotation.Validate( -1800, 1800 ) )
return false;
m_settings.m_ZoneMinThickness = m_minWidth.GetValue();
switch( m_OutlineAppearanceCtrl->GetSelection() )
{
case 0: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::NO_HATCH; break;
case 1: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_EDGE; break;
case 2: m_settings.m_Zone_HatchingStyle = ZONE_CONTAINER::DIAGONAL_FULL; break;
}
if( m_GridStyleCtrl->GetSelection() > 0 )
m_settings.m_FillMode = ZFM_HATCH_PATTERN;
else
m_settings.m_FillMode = ZFM_POLYGONS;
if( m_settings.m_FillMode == ZFM_HATCH_PATTERN )
{
int minThickness = m_minWidth.GetValue();
if( !m_gridStyleThickness.Validate( minThickness, INT_MAX ) )
return false;
if( !m_gridStyleGap.Validate( minThickness, INT_MAX ) )
return false;
}
m_settings.m_HatchFillTypeOrientation = m_gridStyleRotation.GetValue()/10.0; // value is returned in deci-degree
m_settings.m_HatchFillTypeThickness = m_gridStyleThickness.GetValue();
m_settings.m_HatchFillTypeGap = m_gridStyleGap.GetValue();
m_settings.m_HatchFillTypeSmoothingLevel = m_spinCtrlSmoothLevel->GetValue();
m_settings.m_HatchFillTypeSmoothingValue = m_spinCtrlSmoothValue->GetValue();
wxConfigBase* cfg = Kiface().KifaceSettings();
wxASSERT( cfg );
cfg->Write( ZONE_NET_OUTLINES_STYLE_KEY, (long) m_settings.m_Zone_HatchingStyle );
m_settings.m_Zone_45_Only = m_ConstrainOpt->GetValue();
// Get the layer selection for this zone
int layer = -1;
for( int ii = 0; ii < m_layers->GetItemCount(); ++ii )
{
if( m_layers->GetToggleValue( (unsigned) ii, 0 ) )
{
layer = ii;
break;
}
}
if( layer < 0 )
{
DisplayError( this, _( "No layer selected." ) );
return false;
}
*m_ptr = m_settings;
return true;
}
