int64
GusdBoundsCache::Clear(const UT_Set<std::string>& paths)
{
int64 freed = 0;
UT_Array<Key> keys;
for( auto const& entry : m_map ) {
if( paths.contains( entry.first.path.GetString() ) ) {
keys.append( entry.first );
}
}
for( auto const& k : keys ) {
m_map.erase( k );
}
return freed;
}
void
SOP_PrimGroupCentroid::buildGroupData(UT_String &pattern,
const GU_Detail *input_geo,
UT_Array<GA_Range> &range_array,
UT_StringArray &string_values)
{
GA_Range pr_range;
const GA_PrimitiveGroup *group;
GA_ElementGroupTable::ordered_iterator group_it;
UT_String group_name;
UT_WorkArgs tokens;
// Tokenize the pattern.
pattern.tokenize(tokens);
// Get all the primitive groups.
const GA_ElementGroupTable &prim_groups = input_geo->primitiveGroups();
// For each primitive group in order.
for (group_it=prim_groups.obegin(); !group_it.atEnd(); ++group_it)
{
// Get the group.
group = static_cast<GA_PrimitiveGroup *>(*group_it);
// Ensure the group is valid.
if (!group)
continue;
// Skip internal groups.
if (group->getInternal())
continue;
// Check to see if this group name matches the pattern.
group_name = group->getName();
if (!group_name.matchPattern(tokens))
continue;
// Get a range for the primitives in the group.
pr_range = input_geo->getPrimitiveRange(group);
// Add the primitive range and the group name to the arrays.
range_array.append(pr_range);
string_values.append(group_name);
}
}
OP_ERROR
SOP_Smoke_Source::cookMySop(OP_Context &context)
{
// We must lock our inputs before we try to access their geometry.
// OP_AutoLockInputs will automatically unlock our inputs when we return.
// NOTE: Don't call unlockInputs yourself when using this!
OP_AutoLockInputs inputs(this);
if (inputs.lock(context) >= UT_ERROR_ABORT)
return error();
fpreal now = context.getTime();
duplicateSource(0, context);
// These three lines enable the local variable support. This allows
// $CR to get the red colour, for example, as well as supporting
// any varmap created by the Attribute Create SOP.
// Note that if you override evalVariableValue for your own
// local variables (like SOP_Star does) it is essential you
// still call the SOP_Node::evalVariableValue or you'll not
// get any of the benefit of the built in local variables.
// The variable order controls precedence for which attribute will be
// be bound first if the same named variable shows up in multiple
// places. This ordering ensures point attributes get precedence.
setVariableOrder(3, 2, 0, 1);
// The setCur* functions track which part of the gdp is currently
// being processed - it is what is used in the evalVariableValue
// callback as the current point. The 0 is for the first input,
// you can have two inputs so $CR2 would get the second input's
// value.
setCurGdh(0, myGdpHandle);
// Builds the lookup table matching attributes to the local variables.
setupLocalVars();
// Here we determine which groups we have to work on. We only
// handle point groups.
if (error() < UT_ERROR_ABORT && cookInputGroups(context) < UT_ERROR_ABORT &&
(!myGroup || !myGroup->isEmpty()))
{
UT_AutoInterrupt progress("Flattening Points");
// Handle all position, normal, and vector attributes.
// It's not entirely clear what to do for quaternion or transform attributes.
// We bump the data IDs of the attributes to modify in advance,
// since we're already looping over them, and we want to avoid
// bumping them all for each point, in case that's slow.
UT_Array<GA_RWHandleV3> positionattribs(1);
UT_Array<GA_RWHandleV3> normalattribs;
UT_Array<GA_RWHandleV3> vectorattribs;
GA_Attribute *attrib;
GA_FOR_ALL_POINT_ATTRIBUTES(gdp, attrib)
{
// Skip non-transforming attributes
if (!attrib->needsTransform())
continue;
GA_TypeInfo typeinfo = attrib->getTypeInfo();
if (typeinfo == GA_TYPE_POINT || typeinfo == GA_TYPE_HPOINT)
{
GA_RWHandleV3 handle(attrib);
if (handle.isValid())
{
positionattribs.append(handle);
attrib->bumpDataId();
}
}
else if (typeinfo == GA_TYPE_NORMAL)
{
GA_RWHandleV3 handle(attrib);
if (handle.isValid())
{
normalattribs.append(handle);
attrib->bumpDataId();
}
}
else if (typeinfo == GA_TYPE_VECTOR)
{
GA_RWHandleV3 handle(attrib);
if (handle.isValid())
{
vectorattribs.append(handle);
attrib->bumpDataId();
}
}
}
// Iterate over points up to GA_PAGE_SIZE at a time using blockAdvance.
GA_Offset start;
GA_Offset end;
for (GA_Iterator it(gdp->getPointRange(myGroup)); it.blockAdvance(start, end);)
{
// Check if user requested abort
if (progress.wasInterrupted())
break;
for (GA_Offset ptoff = start; ptoff < end; ++ptoff)
{
// This sets the current point that is beint processed to
// ptoff. This means that ptoff will be used for any
// local variable for any parameter evaluation that occurs
// after this point.
// NOTE: Local variables and repeated parameter evaluation
// is significantly slower and sometimes more complicated
// than having a string parameter that specifies the name
// of an attribute whose values should be used instead.
// That parameter would only need to be evaluated once,
// the attribute could be looked up once, and quickly
// accessed; however, a separate point attribute would
// be needed for each property that varies per point.
// Local variable evaluation isn't threadsafe either,
// whereas attributes can be read safely from multiple
// threads.
//
// Long story short: *Local variables are terrible.*
myCurPtOff[0] = ptoff;
float dist = DIST(now);
UT_Vector3 normal;
if (!DIRPOP())
{
switch (ORIENT())
{
case 0 : // XY Plane
normal.assign(0, 0, 1);
break;
case 1 : // YZ Plane
normal.assign(1, 0, 0);
break;
case 2 : // XZ Plane
normal.assign(0, 1, 0);
break;
}
}
else
{
normal.assign(NX(now), NY(now), NZ(now));
normal.normalize();
}
// Project positions onto the plane by subtracting
// off the normal component.
for (exint i = 0; i < positionattribs.size(); ++i)
{
UT_Vector3 p = positionattribs(i).get(ptoff);
p -= normal * (dot(normal, p) - dist);
positionattribs(i).set(ptoff, p);
}
// Normals will now all either be normal or -normal.
for (exint i = 0; i < normalattribs.size(); ++i)
{
UT_Vector3 n = normalattribs(i).get(ptoff);
if (dot(normal, n) < 0)
n = -normal;
else
n = normal;
normalattribs(i).set(ptoff, n);
}
// Project vectors onto the plane through the origin by
// subtracting off the normal component.
for (exint i = 0; i < vectorattribs.size(); ++i)
{
UT_Vector3 v = vectorattribs(i).get(ptoff);
v -= normal * dot(normal, v);
vectorattribs(i).set(ptoff, v);
}
}
}
}
int
SOP_PrimGroupCentroid::buildAttribData(int mode,
const GU_Detail *input_geo,
UT_Array<GA_Range> &range_array,
UT_StringArray &string_values,
UT_IntArray &int_values)
{
int unique_count;
exint int_value;
GA_Range pr_range;
GA_ROAttributeRef source_gah;
UT_String attr_name, str_value;
// Determine the attribute name to use.
attr_name = (mode == 1) ? "name": "class";
// Find the attribute.
source_gah = input_geo->findPrimitiveAttribute(attr_name);
// If there is no attribute, add an error message and quit.
if (source_gah.isInvalid())
{
addError(SOP_ATTRIBUTE_INVALID, attr_name);
return 1;
}
// If the 'name' attribute isn't a string, add an error and quit.
if (mode == 1 && !source_gah.isString())
{
addError(SOP_ATTRIBUTE_INVALID, "'name' must be a string.");
return 1;
}
// If the 'class' attribute isn't an int, add an error and quit.
else if (mode == 2 && !source_gah.isInt())
{
addError(SOP_ATTRIBUTE_INVALID, "'class' must be an integer.");
return 1;
}
// The number of unique values for the attribute.
unique_count = input_geo->getUniqueValueCount(source_gah);
// Add all the ranges and unique values to the appropriate arrays.
if (mode == 1)
{
for (int idx=0; idx<unique_count; ++idx)
{
// Get the unique string value.
str_value = input_geo->getUniqueStringValue(source_gah, idx);
// Get the primitive range corresponding to that value.
pr_range = input_geo->getRangeByValue(source_gah, str_value);
// Add the range to the array.
range_array.append(pr_range);
// Add the string value to the string value list.
string_values.append(str_value);
}
}
else
{
for (int idx=0; idx<unique_count; ++idx)
{
// Get the unique integer value.
int_value = input_geo->getUniqueIntegerValue(source_gah, idx);
// Get the primitive range corresponding to that value.
pr_range = input_geo->getRangeByValue(source_gah, int_value);
// Add the range to the array.
range_array.append(pr_range);
// Add the integer value to the integer value list.
int_values.append(int_value);
}
}
// Return 0 for success.
return 0;
}
