static bool
MacCreadyProcessTimer()
{
bool modified = false;
static ExternalSettings last_external_settings;
static Validity last_auto_mac_cready;
const NMEAInfo &basic = CommonInterface::Basic();
const DerivedInfo &calculated = CommonInterface::Calculated();
if (last_auto_mac_cready.Modified(calculated.auto_mac_cready_available)) {
/* time warp, reset */
last_auto_mac_cready.Clear();
modified = true;
}
if (basic.settings.mac_cready_available.Modified(last_external_settings.mac_cready_available)) {
ActionInterface::SetMacCready(basic.settings.mac_cready, false);
modified = true;
} else if (calculated.auto_mac_cready_available.Modified(last_auto_mac_cready)) {
last_auto_mac_cready = calculated.auto_mac_cready_available;
ActionInterface::SetMacCready(calculated.auto_mac_cready);
modified = true;
}
last_external_settings = basic.settings;
return modified;
}
static Validity
invalid()
{
Validity v;
v.Clear();
return v;
}
void Reset() {
bank_angle_available.Clear();
bank_angle_computed = false;
pitch_angle_available.Clear();
pitch_angle_computed = false;
heading_available.Clear();
heading_computed = false;
}
int main(int argc, char **argv)
{
Args args(argc, argv, "DRIVER FILE");
DebugReplay *replay = CreateDebugReplay(args);
if (replay == NULL)
return EXIT_FAILURE;
args.ExpectEnd();
printf("# time wind_bearing (deg) wind_speed (m/s)\n");
GlidePolar glide_polar(fixed(0));
CirclingSettings circling_settings;
WindSettings wind_settings;
wind_settings.SetDefaults();
CirclingComputer circling_computer;
circling_computer.Reset();
WindComputer wind_computer;
wind_computer.Reset();
Validity last;
last.Clear();
while (replay->Next()) {
const MoreData &basic = replay->Basic();
const DerivedInfo &calculated = replay->Calculated();
circling_computer.TurnRate(replay->SetCalculated(),
basic, calculated.flight);
circling_computer.Turning(replay->SetCalculated(),
basic,
calculated.flight,
circling_settings);
wind_computer.Compute(wind_settings, glide_polar, basic,
replay->SetCalculated());
if (calculated.estimated_wind_available.Modified(last)) {
TCHAR time_buffer[32];
FormatTime(time_buffer, replay->Basic().time);
_tprintf(_T("%s %d %g\n"),
time_buffer, (int)calculated.estimated_wind.bearing.Degrees(),
(double)calculated.estimated_wind.norm);
}
last = calculated.estimated_wind_available;
}
delete replay;
}
void CanvasBase::validateSelection()
{
register Sheet * const sheet = activeSheet();
if (!sheet)
return;
#if 0
XXX TODO
if (selection()->isSingular()) {
const Cell cell = Cell(sheet, selection()->marker()).masterCell();
Validity validity = cell.validity();
if (validity.displayValidationInformation()) {
const QString title = validity.titleInfo();
QString message = validity.messageInfo();
if (title.isEmpty() && message.isEmpty())
return;
if (!d->validationInfo) {
d->validationInfo = new QLabel(this);
QPalette palette = d->validationInfo->palette();
palette.setBrush(QPalette::Window, palette.toolTipBase());
palette.setBrush(QPalette::WindowText, palette.toolTipText());
d->validationInfo->setPalette(palette);
// d->validationInfo->setWindowFlags(Qt::ToolTip);
d->validationInfo->setFrameShape(QFrame::Box);
d->validationInfo->setAlignment(Qt::AlignVCenter);
d->validationInfo->setTextFormat(Qt::RichText);
}
QString resultText("<html><body>");
if (!title.isEmpty()) {
resultText += "<h2>" + title + "</h2>";
}
if (!message.isEmpty()) {
message.replace(QChar('\n'), QString("<br>"));
resultText += "<p>" + message + "</p>";
}
resultText += "</body></html>";
d->validationInfo->setText(resultText);
const double xpos = sheet->columnPosition(cell.column()) + cell.width();
const double ypos = sheet->rowPosition(cell.row()) + cell.height();
const QPointF position = QPointF(xpos, ypos) - offset();
const QPoint viewPosition = viewConverter()->documentToView(position).toPoint();
d->validationInfo->move(/*mapToGlobal*/(viewPosition)); // Qt::ToolTip!
d->validationInfo->show();
} else {
delete d->validationInfo;
d->validationInfo = 0;
}
} else {
delete d->validationInfo;
d->validationInfo = 0;
}
#endif
}
/**
* Set the true airspeed [m/s] and derive the indicated airspeed
* from it, using the specified altitude [m].
*/
void ProvideTrueAirspeedWithAltitude(fixed tas, fixed altitude) {
true_airspeed = tas;
indicated_airspeed = true_airspeed /
AtmosphericPressure::AirDensityRatio(altitude);
airspeed_available.Update(clock);
airspeed_real = true;
}
bool Complement(const Validity &other) {
if (!IsValid() && other.IsValid()) {
*this = other;
return true;
} else
return false;
}
/**
* Set the true airspeed [m/s] and derive the indicated airspeed
* from it, using the specified altitude [m].
*/
void ProvideIndicatedAirspeedWithAltitude(fixed ias, fixed altitude) {
indicated_airspeed = ias;
true_airspeed = indicated_airspeed *
AtmosphericPressure::AirDensityRatio(altitude);
airspeed_available.Update(clock);
airspeed_real = true;
}
void Expire(fixed clock) {
new_traffic.Expire(clock, fixed(60));
for (unsigned i = list.size(); i-- > 0;)
if (!list[i].Refresh(clock))
list.quick_remove(i);
}
void Complement(const FlarmVersion &add) {
if (available.Complement(add.available)) {
hardware_version = add.hardware_version;
software_version = add.software_version;
obstacle_version = add.obstacle_version;
}
}
void
TrafficListWidget::UpdateList()
{
assert(filter_widget != nullptr);
items.clear();
last_update.Clear();
const TCHAR *callsign = filter_widget->GetValueString(CALLSIGN);
if (!StringIsEmpty(callsign)) {
FlarmId ids[30];
unsigned count = FlarmDetails::FindIdsByCallSign(callsign, ids, 30);
for (unsigned i = 0; i < count; ++i)
AddItem(ids[i]);
} else {
/* if no filter was set, show a list of current traffic and known
traffic */
/* add live FLARM traffic */
for (const auto &i : CommonInterface::Basic().flarm.traffic.list) {
AddItem(i.id);
}
/* add FLARM peers that have a user-defined color */
for (const auto &i : traffic_databases->flarm_colors) {
Item &item = AddItem(i.first);
item.color = i.second;
}
/* add FLARM peers that have a user-defined name */
for (const auto &i : traffic_databases->flarm_names) {
AddItem(i.id);
}
#ifdef HAVE_SKYLINES_TRACKING_HANDLER
/* show SkyLines traffic unless this is a FLARM traffic picker
dialog (from dlgTeamCode) */
if (action_listener == nullptr) {
const auto &data = tracking->GetSkyLinesData();
const ScopeLock protect(data.mutex);
for (const auto &i : data.traffic) {
items.emplace_back(i.first, i.second.location);
Item &item = items.back();
if (i.second.location.IsValid() &&
CommonInterface::Basic().location_available)
item.vector = GeoVector(CommonInterface::Basic().location,
i.second.location);
}
}
#endif
}
GetList().SetLength(items.size());
UpdateVolatile();
UpdateButtons();
}
void
ProcessTimer::AirspaceProcessTimer()
{
static Validity previous;
const AirspaceWarningsInfo &warnings =
CommonInterface::Calculated().airspace_warnings;
if (previous.Modified(warnings.latest))
/* time warp, reset */
previous.Clear();
if (warnings.latest.Modified(previous)) {
previous = warnings.latest;
CommonInterface::main_window.SendAirspaceWarning();
}
}
void ProvideAutoMacCready(fixed clock, fixed mc) {
if (auto_mac_cready_available &&
fabs(auto_mac_cready - mc) < fixed(0.05))
/* change is too small, ignore the new value to limit the rate */
return;
auto_mac_cready = mc;
auto_mac_cready_available.Update(clock);
}
/**
* Same as ProvideBaroAltitudeTrue(), but don't overwrite a "strong"
* value.
*/
void ProvideWeakBaroAltitude(double value) {
if (baro_altitude_available && !baro_altitude_weak)
/* don't overwrite "strong" value */
return;
baro_altitude = value;
baro_altitude_weak = true;
baro_altitude_available.Update(clock);
}
/**
* Same as ProvidePressureAltitude(), but don't overwrite a "strong"
* value.
*/
void ProvideWeakPressureAltitude(double value) {
if (pressure_altitude_available && !pressure_altitude_weak)
/* don't overwrite "strong" value */
return;
pressure_altitude = value;
pressure_altitude_weak = true;
pressure_altitude_available.Update(clock);
}
void Refresh(fixed Time) {
available.Expire(Time, fixed(10));
if (!available)
traffic.clear();
for (unsigned i = traffic.size(); i-- > 0;)
if (!traffic[i].Refresh(Time))
traffic.quick_remove(i);
NewTraffic = false;
}
void Complement(const FlarmError &add) {
if (available.Complement(add.available)) {
severity = add.severity;
code = add.code;
}
}
void Clear() {
available.Clear();
}
/**
* Set the external wind value.
*/
void ProvideExternalWind(const SpeedVector &value) {
external_wind = value;
external_wind_available.Update(clock);
}
void Clear() {
new_traffic.Clear();
list.clear();
}
/**
* Set the gross, non-compensated, plain-old vertical speed vario value [m/s].
*/
void ProvideNoncompVario(double value) {
noncomp_vario = value;
noncomp_vario_available.Update(clock);
}
/**
* Set both true airspeed and indicated airspeed to two different
* values [m/s].
*/
void ProvideBothAirspeeds(double ias, double tas) {
indicated_airspeed = ias;
true_airspeed = tas;
airspeed_available.Update(clock);
airspeed_real = true;
}
/**
* Used only as a config value that should be saved.
*
* Currently used for:
* battery voltage measurement (multiplier)
* offset between the pitot- and the static pressure sensor in hPa (zero).
* temperature sensor
*/
void ProvideSensorCalibration(double value, double offset) {
sensor_calibration_factor = value;
sensor_calibration_offset = offset;
sensor_calibration_available.Update(clock);
}
/**
* Provide dynamic pressure from a pitot tube.
* Use only to compute indicated airspeed when static pressure is known.
* When both pitot- and dynamic pressure are available use dynamic.
*/
void ProvideDynamicPressure(AtmosphericPressure value) {
dyn_pressure = value;
dyn_pressure_available.Update(clock);
}
/**
* Provide barometric altitude from a static pressure sensor, but
* only use it if the previous altitude was not present or the
* same/lower priority.
*/
void ProvideStaticPressure(AtmosphericPressure value) {
static_pressure = value;
static_pressure_available.Update(clock);
}
void ValidityDialog::init()
{
const Map *const map = m_selection->activeSheet()->map();
const CalculationSettings *settings = map->calculationSettings();
const KLocale* locale = settings->locale();
Validity validity = Cell(m_selection->activeSheet(), m_selection->marker()).validity();
if (!validity.isEmpty()) {
message->setPlainText(validity.message());
title->setText(validity.title());
QString tmp;
switch (validity.restriction()) {
case Validity::None:
chooseType->setCurrentIndex(0);
break;
case Validity::Number:
chooseType->setCurrentIndex(1);
if (validity.condition() >= 5)
val_max->setText(tmp.setNum((double)numToDouble(validity.maximumValue().asFloat())));
val_min->setText(tmp.setNum((double)numToDouble(validity.minimumValue().asFloat())));
break;
case Validity::Integer:
chooseType->setCurrentIndex(2);
if (validity.condition() >= 5)
val_max->setText(tmp.setNum((double)numToDouble(validity.maximumValue().asFloat())));
val_min->setText(tmp.setNum((double)numToDouble(validity.minimumValue().asFloat())));
break;
case Validity::TextLength:
chooseType->setCurrentIndex(6);
if (validity.condition() >= 5)
val_max->setText(tmp.setNum((double)numToDouble(validity.maximumValue().asFloat())));
val_min->setText(tmp.setNum((double)numToDouble(validity.minimumValue().asFloat())));
break;
case Validity::Text:
chooseType->setCurrentIndex(3);
break;
case Validity::Date:
chooseType->setCurrentIndex(4);
val_min->setText(locale->formatDate(validity.minimumValue().asDate(settings), KLocale::ShortDate));
if (validity.condition() >= 5)
val_max->setText(locale->formatDate(validity.maximumValue().asDate(settings), KLocale::ShortDate));
break;
case Validity::Time:
chooseType->setCurrentIndex(5);
val_min->setText(locale->formatTime(validity.minimumValue().asTime(settings), true));
if (validity.condition() >= 5)
val_max->setText(locale->formatTime(validity.maximumValue().asTime(settings), true));
break;
case Validity::List: {
chooseType->setCurrentIndex(7);
const QStringList lst = validity.validityList();
QString tmp;
for (QStringList::ConstIterator it = lst.begin(); it != lst.end(); ++it) {
tmp += (*it) + '\n';
}
validityList->setText(tmp);
}
break;
default :
chooseType->setCurrentIndex(0);
break;
}
chooseAction->setCurrentIndex(chooseAction->findData(QVariant::fromValue(validity.action())));
choose->setCurrentIndex(choose->findData(QVariant::fromValue(validity.condition())));
displayMessage->setChecked(validity.displayMessage());
allowEmptyCell->setChecked(validity.allowEmptyCell());
titleHelp->setText(validity.titleInfo());
messageHelp->setPlainText(validity.messageInfo());
displayHelp->setChecked(validity.displayValidationInformation());
}
changeIndexType(chooseType->currentIndex()) ;
changeIndexCond(choose->currentIndex()) ;
}
void ValidityDialog::OkPressed()
{
const KLocale* locale = m_selection->activeSheet()->map()->calculationSettings()->locale();
const ValueParser *const parser = m_selection->activeSheet()->map()->parser();
Validity validity;
if (chooseType->currentIndex() == 1) {
bool ok;
val_min->text().toDouble(&ok);
if (! ok) {
KMessageBox::error(this , i18n("This is not a valid value."), i18n("Error"));
val_min->setText("");
return;
}
val_max->text().toDouble(&ok);
if (! ok && choose->currentIndex() >= 5 && choose->currentIndex() < 7) {
KMessageBox::error(this , i18n("This is not a valid value."), i18n("Error"));
val_max->setText("");
return;
}
} else if (chooseType->currentIndex() == 2 || chooseType->currentIndex() == 6) {
bool ok;
val_min->text().toInt(&ok);
if (! ok) {
KMessageBox::error(this , i18n("This is not a valid value."), i18n("Error"));
val_min->setText("");
return;
}
val_max->text().toInt(&ok);
if (! ok && choose->currentIndex() >= 5 && choose->currentIndex() < 7) {
KMessageBox::error(this , i18n("This is not a valid value."), i18n("Error"));
val_max->setText("");
return;
}
} else if (chooseType->currentIndex() == 5) {
if (!locale->readTime(val_min->text()).isValid()) {
KMessageBox::error(this , i18n("This is not a valid time."), i18n("Error"));
val_min->setText("");
return;
}
if (!locale->readTime(val_max->text()).isValid() && choose->currentIndex() >= 5) {
KMessageBox::error(this , i18n("This is not a valid time."), i18n("Error"));
val_max->setText("");
return;
}
} else if (chooseType->currentIndex() == 4) {
if (!locale->readDate(val_min->text()).isValid()) {
KMessageBox::error(this , i18n("This is not a valid date."), i18n("Error"));
val_min->setText("");
return;
}
if (!locale->readDate(val_max->text()).isValid() && choose->currentIndex() >= 5) {
KMessageBox::error(this , i18n("This is not a valid date."), i18n("Error"));
val_max->setText("");
return;
}
} else if (chooseType->currentIndex() == 7) {
//Nothing
}
if (chooseType->currentIndex() == 0) {//no validity
validity.setRestriction(Validity::None);
validity.setAction(Validity::Stop);
validity.setCondition(Conditional::Equal);
validity.setMessage(message->toPlainText());
validity.setTitle(title->text());
validity.setMinimumValue(Value());
validity.setMaximumValue(Value());
} else {
validity.setRestriction(chooseType->itemData(chooseType->currentIndex()).value<Validity::Restriction>());
validity.setAction(chooseAction->itemData(chooseAction->currentIndex()).value<Validity::Action>());
validity.setCondition(choose->itemData(choose->currentIndex()).value<Conditional::Type>());
validity.setMessage(message->toPlainText());
validity.setTitle(title->text());
validity.setMinimumValue(Value());
validity.setMaximumValue(Value());
if (chooseType->currentIndex() == 1) {
if (choose->currentIndex() < 5) {
validity.setMinimumValue(Value(val_min->text().toDouble()));
} else {
validity.setMinimumValue(Value(qMin(val_min->text().toDouble(), val_max->text().toDouble())));
validity.setMaximumValue(Value(qMax(val_max->text().toDouble(), val_min->text().toDouble())));
}
} else if (chooseType->currentIndex() == 2 || chooseType->currentIndex() == 6) {
if (choose->currentIndex() < 5) {
validity.setMinimumValue(Value(val_min->text().toInt()));
} else {
validity.setMinimumValue(Value(qMin(val_min->text().toInt(), val_max->text().toInt())));
validity.setMaximumValue(Value(qMax(val_max->text().toInt(), val_min->text().toInt())));
}
} else if (chooseType->currentIndex() == 4) {
const Value minValue = parser->tryParseDate(val_min->text());
const Value maxValue = parser->tryParseDate(val_max->text());
if (choose->currentIndex() < 5) {
validity.setMinimumValue(minValue);
} else {
if (minValue.less(maxValue)) {
validity.setMinimumValue(minValue);
validity.setMaximumValue(maxValue);
} else {
validity.setMinimumValue(maxValue);
validity.setMaximumValue(minValue);
}
}
} else if (chooseType->currentIndex() == 5) {
const Value minValue = parser->tryParseTime(val_min->text());
const Value maxValue = parser->tryParseTime(val_max->text());
if (choose->currentIndex() < 5) {
validity.setMinimumValue(minValue);
} else {
if (minValue.less(maxValue)) {
validity.setMaximumValue(maxValue);
validity.setMinimumValue(minValue);
} else {
validity.setMaximumValue(minValue);
validity.setMinimumValue(maxValue);
}
}
} else if (chooseType->currentIndex() == 7) {
validity.setValidityList(validityList->toPlainText().split('\n', QString::SkipEmptyParts));
}
}
validity.setDisplayMessage(displayMessage->isChecked());
validity.setAllowEmptyCell(allowEmptyCell->isChecked());
validity.setDisplayValidationInformation(displayHelp->isChecked());
validity.setMessageInfo(messageHelp->toPlainText());
validity.setTitleInfo(titleHelp->text());
ValidityCommand* manipulator = new ValidityCommand();
manipulator->setSheet(m_selection->activeSheet());
manipulator->setValidity(validity);
manipulator->add(*m_selection);
manipulator->execute(m_selection->canvas());
accept();
}
/**
* Set the barometric TE vario value [m/s].
*/
void ProvideTotalEnergyVario(double value) {
total_energy_vario = value;
total_energy_vario_available.Update(clock);
}
/**
* Used to compute indicated airspeed
* when static pressure is known.
* Value already includes calibration data.
*/
void ProvidePitotPressure(AtmosphericPressure value) {
pitot_pressure = value;
pitot_pressure_available.Update(clock);
}
/**
* Set the barometric netto vario value [m/s].
*/
void ProvideNettoVario(double value) {
netto_vario = value;
netto_vario_available.Update(clock);
}
