__forceinline void Pipedata::addVertex(const Viewport& vp, const vec4& src, const mat4& m)
{
auto point_in_eyespace = mat4_mul(m, src);
auto point_in_clipspace = vp.eye_to_clip(point_in_eyespace);
auto clipflags = Guardband::clipPoint(point_in_clipspace);
vlst_p.push_back(point_in_eyespace);
vlst_cf.push_back(clipflags);
new_vcnt++;
}
void Pipedata::process_face(PFace& f, const Viewport& vp, const Viewdevice& vpd)
{
vec4 p1 = vpd.clip_to_device(vp.eye_to_clip(vlst_p[f.ivp[0]]));
vec4 p2 = vpd.clip_to_device(vp.eye_to_clip(vlst_p[f.ivp[1]]));
vec4 p3 = vpd.clip_to_device(vp.eye_to_clip(vlst_p[f.ivp[2]]));
const vec4 d31 = p3 - p1;
const vec4 d21 = p2 - p1;
const float area = d31.x*d21.y - d31.y*d21.x;
bool backfacing = area < 0;
if (backfacing) return; // cull
// if (f.backfacing) {
// std::swap(p1, p3);
// }
binner.insert(p1, p2, p3, backfacing, f);
}
void Pipedata::addFace(const Viewport& vp, const Viewdevice& vpd, const Face& fsrc)
{
const int vidx1 = fsrc.ivp[0] + vbase;
const int vidx2 = fsrc.ivp[1] + vbase;
const int vidx3 = fsrc.ivp[2] + vbase;
const auto& pv1_p = vlst_p[vidx1];
const auto& pv2_p = vlst_p[vidx2];
const auto& pv3_p = vlst_p[vidx3];
const auto& pv1_cf = vlst_cf[vidx1];
const auto& pv2_cf = vlst_cf[vidx2];
const auto& pv3_cf = vlst_cf[vidx3];
// early out if all points are outside of any plane
if (pv1_cf & pv2_cf & pv3_cf) return;
const unsigned required_clipping = pv1_cf | pv2_cf | pv3_cf;
if (required_clipping == 0) {
// all inside
process_face(fsrc.make_rebased(vbase, tbase, nbase), vp, vpd);
return;
}
// needs clipping
unsigned a_vidx[32], b_vidx[32];
unsigned a_tidx[32], b_tidx[32];
unsigned a_nidx[32], b_nidx[32];
unsigned a_cnt = 3;
for (unsigned i = 0; i < 3; i++) {
a_vidx[i] = fsrc.ivp[i] + vbase;
a_tidx[i] = fsrc.iuv[i] + tbase;
a_nidx[i] = fsrc.ipn[i] + nbase;
}
for (int clip_plane = 0; clip_plane < 5; clip_plane++) { // XXX set to 6 to enable the far plane
const int planebit = 1 << clip_plane;
if (!(required_clipping & planebit)) continue; // skip plane that is ok
bool we_are_inside;
unsigned this_pi = 0;
unsigned b_cnt = 0;
do {
const auto next_pi = (this_pi + 1) % a_cnt; // wrap
const auto& this_v_p = vlst_p[a_vidx[this_pi]];
const auto this_v_c = vp.eye_to_clip(this_v_p);
const auto& this_t = tlst[a_tidx[this_pi]];
const auto& this_n = nlst[a_nidx[this_pi]];
const auto& next_v_p = vlst_p[a_vidx[next_pi]];
const auto next_v_c = vp.eye_to_clip(next_v_p);
const auto& next_t = tlst[a_tidx[next_pi]];
const auto& next_n = nlst[a_nidx[next_pi]];
if (this_pi == 0) {
we_are_inside = Guardband::is_inside(planebit, this_v_c);
}
const bool next_is_inside = Guardband::is_inside(planebit, next_v_c);
if (we_are_inside) {
b_vidx[b_cnt] = a_vidx[this_pi];
b_tidx[b_cnt] = a_tidx[this_pi];
b_nidx[b_cnt] = a_nidx[this_pi];
b_cnt++;
}
if (we_are_inside != next_is_inside) {
we_are_inside = !we_are_inside;
const float t = Guardband::clipLine(planebit, this_v_c, next_v_c);
auto new_p = lerp(this_v_p, next_v_p, t);
auto new_c = vp.eye_to_clip(new_p);
vlst_p.push_back(new_p);
vlst_cf.push_back(0);
b_vidx[b_cnt] = vlst_p.size() - 1;
tlst.push_back(lerp(this_t, next_t, t)); b_tidx[b_cnt] = tlst.size() - 1;
nlst.push_back(lerp(this_n, next_n, t)); b_nidx[b_cnt] = nlst.size() - 1;
b_cnt++;
}
this_pi = next_pi;
} while (this_pi != 0);
for (unsigned i = 0; i < b_cnt; i++) {
a_vidx[i] = b_vidx[i];
a_tidx[i] = b_tidx[i];
a_nidx[i] = b_nidx[i];
}
a_cnt = b_cnt;
if (a_cnt == 0) break;
}
if (a_cnt == 0) return;
for (unsigned a = 1; a < a_cnt - 1; a++) {
PFace f = make_tri(
fsrc.mf,
a_vidx[0], a_vidx[a], a_vidx[a + 1],
a_tidx[0], a_tidx[a], a_tidx[a + 1],
a_nidx[0], a_nidx[a], a_nidx[a + 1]);
process_face(f, vp, vpd);
}
}
void Binner::insert_gltri(
const Viewport& vp,
const Viewdevice& vpd,
const vec4 * const pv,
const vec4 * const pn,
const vec4 * const pc,
const vec4 * const pt,
int i0, int i1, int i2,
const int material_id
)
{
auto p1 = vpd.clip_to_device(vp.eye_to_clip(pv[i0]));
auto p2 = vpd.clip_to_device(vp.eye_to_clip(pv[i1]));
auto p3 = vpd.clip_to_device(vp.eye_to_clip(pv[i2]));
const auto d31 = p3 - p1;
const auto d21 = p2 - p1;
const float area = d31.x*d21.y - d31.y*d21.x;
auto backfacing = area < 0;
if (backfacing) return; // cull
/*
if (backfacing) {
std::swap(p1, p3);
std::swap(i0, i2);
}
*/
auto pmin = vmax(vmin(p1, vmin(p2, p3)), vec4::zero());
auto pmax = vmin(vmax(p1, vmax(p2, p3)), device_max);
auto x0 = int(pmin._x());
auto y0 = int(pmin._y());
auto x1 = int(pmax._x()); // trick: set this to pmin._x()
auto y1 = int(pmax._y());
const int ylim = min(y1 / tileheight, device_height_in_tiles - 1);
const int xlim = min(x1 / tilewidth, device_width_in_tiles - 1);
const int tx0 = x0 / tilewidth;
for (int ty = y0 / tileheight; ty <= ylim; ty++) {
int bin_row_offset = ty * device_width_in_tiles;
for (int tx = tx0; tx <= xlim; tx++) {
auto& bin = bins[bin_row_offset + tx];
unsigned char facedata = material_id;
if (backfacing) facedata |= 0x80;
bin.glface.push_back(facedata);
bin.gldata.push_back(p1);
bin.gldata.push_back(pv[i0]);
bin.gldata.push_back(pn[i0]);
bin.gldata.push_back(pc[i0]);
bin.gldata.push_back(pt[i0]);
bin.gldata.push_back(p2);
bin.gldata.push_back(pv[i1]);
bin.gldata.push_back(pn[i1]);
bin.gldata.push_back(pc[i1]);
bin.gldata.push_back(pt[i1]);
bin.gldata.push_back(p3);
bin.gldata.push_back(pv[i2]);
bin.gldata.push_back(pn[i2]);
bin.gldata.push_back(pc[i2]);
bin.gldata.push_back(pt[i2]);
}
}
}
