Ejemplo n.º 1
0
int main (int argc, char *argv[])
{
  std::string phyMode ("DsssRate1Mbps");
  double rss = -80;  // -dBm
  uint32_t packetSize = 1000; // bytes
  uint32_t numPackets = 1;
  double interval = 1.0; // seconds
  bool verbose = false;

  CommandLine cmd;

  cmd.AddValue ("phyMode", "Wifi Phy mode", phyMode);
  cmd.AddValue ("rss", "received signal strength", rss);
  cmd.AddValue ("packetSize", "size of application packet sent", packetSize);
  cmd.AddValue ("numPackets", "number of packets generated", numPackets);
  cmd.AddValue ("interval", "interval (seconds) between packets", interval);
  cmd.AddValue ("verbose", "turn on all WifiNetDevice log components", verbose);

  cmd.Parse (argc, argv);
  // Convert to time object
  Time interPacketInterval = Seconds (interval);

  // disable fragmentation for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
  // turn off RTS/CTS for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
  // Fix non-unicast data rate to be the same as that of unicast
  Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode", 
                      StringValue (phyMode));

  NodeContainer c;
  c.Create (2);

  // The below set of helpers will help us to put together the wifi NICs we want
  WifiHelper wifi;
  if (verbose)
    {
      wifi.EnableLogComponents ();  // Turn on all Wifi logging
    }
  wifi.SetStandard (WIFI_PHY_STANDARD_80211b);

  YansWifiPhyHelper wifiPhy =  YansWifiPhyHelper::Default ();
  // This is one parameter that matters when using FixedRssLossModel
  // set it to zero; otherwise, gain will be added
  wifiPhy.Set ("RxGain", DoubleValue (0) ); 
  // ns-3 supports RadioTap and Prism tracing extensions for 802.11b
  wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO); 

  YansWifiChannelHelper wifiChannel;
  wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
  // The below FixedRssLossModel will cause the rss to be fixed regardless
  // of the distance between the two stations, and the transmit power
  wifiChannel.AddPropagationLoss ("ns3::FixedRssLossModel","Rss",DoubleValue (rss));
  wifiPhy.SetChannel (wifiChannel.Create ());

  // Add a non-QoS upper mac, and disable rate control
  NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
  wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
                                "DataMode",StringValue (phyMode),
                                "ControlMode",StringValue (phyMode));
  // Set it to adhoc mode
  wifiMac.SetType ("ns3::AdhocWifiMac");
  NetDeviceContainer devices = wifi.Install (wifiPhy, wifiMac, c);

  // Note that with FixedRssLossModel, the positions below are not 
  // used for received signal strength. 
  MobilityHelper mobility;
  Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
  positionAlloc->Add (Vector (0.0, 0.0, 0.0));
  positionAlloc->Add (Vector (5.0, 0.0, 0.0));
  mobility.SetPositionAllocator (positionAlloc);
  mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
  mobility.Install (c);

  InternetStackHelper internet;
  internet.Install (c);

  Ipv4AddressHelper ipv4;
  NS_LOG_INFO ("Assign IP Addresses.");
  ipv4.SetBase ("10.1.1.0", "255.255.255.0");
  Ipv4InterfaceContainer i = ipv4.Assign (devices);

  TypeId tid = TypeId::LookupByName ("ns3::UdpSocketFactory");
  Ptr<Socket> recvSink = Socket::CreateSocket (c.Get (0), tid);
  InetSocketAddress local = InetSocketAddress (Ipv4Address::GetAny (), 80);
  recvSink->Bind (local);
  recvSink->SetRecvCallback (MakeCallback (&ReceivePacket));

  Ptr<Socket> source = Socket::CreateSocket (c.Get (1), tid);
  InetSocketAddress remote = InetSocketAddress (Ipv4Address ("255.255.255.255"), 80);
  source->SetAllowBroadcast (true);
  source->Connect (remote);

  // Tracing
  wifiPhy.EnablePcap ("wifi-simple-adhoc", devices);

  // Output what we are doing
  NS_LOG_UNCOND ("Testing " << numPackets  << " packets sent with receiver rss " << rss );

  Simulator::ScheduleWithContext (source->GetNode ()->GetId (),
                                  Seconds (1.0), &GenerateTraffic, 
                                  source, packetSize, numPackets, interPacketInterval);

  Simulator::Run ();
  Simulator::Destroy ();

  return 0;
}
int
main (int argc, char *argv[])
{
#ifdef NS3_CLICK

  //
  // Enable logging
  //
  LogComponentEnable ("NsclickUdpClientServerWifi", LOG_LEVEL_INFO);

  //
  // Explicitly create the nodes required by the topology (shown above).
  //
  NS_LOG_INFO ("Create nodes.");
  NodeContainer n;
  n.Create (4);

  NS_LOG_INFO ("Create channels.");
  //
  // Explicitly create the channels required by the topology (shown above).
  //
  std::string phyMode ("DsssRate1Mbps");

  // disable fragmentation for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
  // turn off RTS/CTS for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
  // Fix non-unicast data rate to be the same as that of unicast
  Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode",
                      StringValue (phyMode));

  WifiHelper wifi;
  wifi.SetStandard (WIFI_PHY_STANDARD_80211b);

  YansWifiPhyHelper wifiPhy =  YansWifiPhyHelper::Default ();
  // This is one parameter that matters when using FixedRssLossModel
  // set it to zero; otherwise, gain will be added
  wifiPhy.Set ("RxGain", DoubleValue (0) );
  // ns-3 supports RadioTap and Prism tracing extensions for 802.11b
  wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO);

  YansWifiChannelHelper wifiChannel;
  wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
  // The below FixedRssLossModel will cause the rss to be fixed regardless
  // of the distance between the two stations, and the transmit power
  wifiChannel.AddPropagationLoss ("ns3::FixedRssLossModel","Rss",DoubleValue (-80));
  wifiPhy.SetChannel (wifiChannel.Create ());

  // Add a non-QoS upper mac, and disable rate control
  NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
  wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
                                "DataMode",StringValue (phyMode),
                                "ControlMode",StringValue (phyMode));
  // Set it to adhoc mode
  wifiMac.SetType ("ns3::AdhocWifiMac");
  NetDeviceContainer d = wifi.Install (wifiPhy, wifiMac, n);

  MobilityHelper mobility;
  Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
  positionAlloc->Add (Vector (0.0, 0.0, 0.0));
  positionAlloc->Add (Vector (10.0, 0.0, 0.0));
  positionAlloc->Add (Vector (20.0, 0.0, 0.0));
  positionAlloc->Add (Vector (0.0, 10.0, 0.0));
  mobility.SetPositionAllocator (positionAlloc);
  mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
  mobility.Install (n);

  //
  // Install Click on the nodes
  //
  ClickInternetStackHelper clickinternet;
  clickinternet.SetClickFile (n.Get (0), "src/click/examples/nsclick-wifi-single-interface.click");
  clickinternet.SetClickFile (n.Get (1), "src/click/examples/nsclick-wifi-single-interface.click");
  clickinternet.SetClickFile (n.Get (2), "src/click/examples/nsclick-wifi-single-interface.click");

  // Node 4 is to run in promiscuous mode. This can be verified
  // from the pcap trace Node4_in_eth0.pcap generated after running
  // this script.
  clickinternet.SetClickFile (n.Get (3), "src/click/examples/nsclick-wifi-single-interface-promisc.click");
  clickinternet.SetRoutingTableElement (n, "rt");
  clickinternet.Install (n);
  Ipv4AddressHelper ipv4;
  //
  // We've got the "hardware" in place.  Now we need to add IP addresses.
  //
  NS_LOG_INFO ("Assign IP Addresses.");
  ipv4.SetBase ("172.16.1.0", "255.255.255.0");
  Ipv4InterfaceContainer i = ipv4.Assign (d);

  NS_LOG_INFO ("Create Applications.");
  //
  // Create one udpServer applications on node one.
  //
  uint16_t port = 4000;
  UdpServerHelper server (port);
  ApplicationContainer apps = server.Install (n.Get (1));
  apps.Start (Seconds (1.0));
  apps.Stop (Seconds (10.0));

  //
  // Create one UdpClient application to send UDP datagrams from node zero to
  // node one.
  //
  uint32_t MaxPacketSize = 1024;
  Time interPacketInterval = Seconds (0.5);
  uint32_t maxPacketCount = 320;
  UdpClientHelper client (i.GetAddress (1), port);
  client.SetAttribute ("MaxPackets", UintegerValue (maxPacketCount));
  client.SetAttribute ("Interval", TimeValue (interPacketInterval));
  client.SetAttribute ("PacketSize", UintegerValue (MaxPacketSize));
  apps = client.Install (NodeContainer (n.Get (0), n.Get (2)));
  apps.Start (Seconds (2.0));
  apps.Stop (Seconds (10.0));

  wifiPhy.EnablePcap ("nsclick-udp-client-server-wifi", d);

  // Force the MAC address of the second node: The current ARP
  // implementation of Click sends only one ARP request per incoming
  // packet for an unknown destination and does not retransmit if no
  // response is received. With the scenario of this example, all ARP
  // requests of node 3 are lost due to interference from node
  // 1. Hence, we fill in the ARP table of node 2 before at the
  // beginning of the simulation
  Simulator::Schedule (Seconds (0.5), &ReadArp, n.Get (2)->GetObject<Ipv4ClickRouting> ());
  Simulator::Schedule (Seconds (0.6), &WriteArp, n.Get (2)->GetObject<Ipv4ClickRouting> ());
  Simulator::Schedule (Seconds (0.7), &ReadArp, n.Get (2)->GetObject<Ipv4ClickRouting> ());

  //
  // Now, do the actual simulation.
  //
  NS_LOG_INFO ("Run Simulation.");
  Simulator::Stop (Seconds (20.0));
  Simulator::Run ();
  Simulator::Destroy ();
  NS_LOG_INFO ("Done.");
#else
  NS_FATAL_ERROR ("Can't use ns-3-click without NSCLICK compiled in");
#endif
}
int main (int argc, char *argv[])
{
  std::string phyMode ("DsssRate1Mbps");
  double distance = 500;  // m
  uint32_t packetSize = 1000; // bytes
  uint32_t numPackets = 1;
  uint32_t numNodes = 25;  // by default, 5x5
  uint32_t sinkNode = 0;
  uint32_t sourceNode = 24;
  double interval = 1.0; // seconds
  bool verbose = false;
  bool tracing = false;

  CommandLine cmd;

  cmd.AddValue ("phyMode", "Wifi Phy mode", phyMode);
  cmd.AddValue ("distance", "distance (m)", distance);
  cmd.AddValue ("packetSize", "size of application packet sent", packetSize);
  cmd.AddValue ("numPackets", "number of packets generated", numPackets);
  cmd.AddValue ("interval", "interval (seconds) between packets", interval);
  cmd.AddValue ("verbose", "turn on all WifiNetDevice log components", verbose);
  cmd.AddValue ("tracing", "turn on ascii and pcap tracing", tracing);
  cmd.AddValue ("numNodes", "number of nodes", numNodes);
  cmd.AddValue ("sinkNode", "Receiver node number", sinkNode);
  cmd.AddValue ("sourceNode", "Sender node number", sourceNode);

  cmd.Parse (argc, argv);
  // Convert to time object
  Time interPacketInterval = Seconds (interval);

  // disable fragmentation for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
  // turn off RTS/CTS for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
  // Fix non-unicast data rate to be the same as that of unicast
  Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode", 
                      StringValue (phyMode));

  NodeContainer c;
  c.Create (numNodes);

  // The below set of helpers will help us to put together the wifi NICs we want
  WifiHelper wifi;
  if (verbose)
    {
      wifi.EnableLogComponents ();  // Turn on all Wifi logging
    }

  YansWifiPhyHelper wifiPhy =  YansWifiPhyHelper::Default ();
  // set it to zero; otherwise, gain will be added
  wifiPhy.Set ("RxGain", DoubleValue (-10) ); 
  // ns-3 supports RadioTap and Prism tracing extensions for 802.11b
  wifiPhy.SetPcapDataLinkType (YansWifiPhyHelper::DLT_IEEE802_11_RADIO); 

  YansWifiChannelHelper wifiChannel;
  wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
  wifiChannel.AddPropagationLoss ("ns3::FriisPropagationLossModel");
  wifiPhy.SetChannel (wifiChannel.Create ());

  // Add a non-QoS upper mac, and disable rate control
  NqosWifiMacHelper wifiMac = NqosWifiMacHelper::Default ();
  wifi.SetStandard (WIFI_PHY_STANDARD_80211b);
  wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
                                "DataMode",StringValue (phyMode),
                                "ControlMode",StringValue (phyMode));
  // Set it to adhoc mode
  wifiMac.SetType ("ns3::AdhocWifiMac");
  NetDeviceContainer devices = wifi.Install (wifiPhy, wifiMac, c);

  MobilityHelper mobility;
  mobility.SetPositionAllocator ("ns3::GridPositionAllocator",
                                 "MinX", DoubleValue (0.0),
                                 "MinY", DoubleValue (0.0),
                                 "DeltaX", DoubleValue (distance),
                                 "DeltaY", DoubleValue (distance),
                                 "GridWidth", UintegerValue (5),
                                 "LayoutType", StringValue ("RowFirst"));
  mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
  mobility.Install (c);

  // Enable OLSR
  OlsrHelper olsr;
  Ipv4StaticRoutingHelper staticRouting;

  Ipv4ListRoutingHelper list;
  list.Add (staticRouting, 0);
  list.Add (olsr, 10);

  InternetStackHelper internet;
  internet.SetRoutingHelper (list); // has effect on the next Install ()
  internet.Install (c);

  Ipv4AddressHelper ipv4;
  NS_LOG_INFO ("Assign IP Addresses.");
  ipv4.SetBase ("10.1.1.0", "255.255.255.0");
  Ipv4InterfaceContainer i = ipv4.Assign (devices);

  TypeId tid = TypeId::LookupByName ("ns3::UdpSocketFactory");
  Ptr<Socket> recvSink = Socket::CreateSocket (c.Get (sinkNode), tid);
  InetSocketAddress local = InetSocketAddress (Ipv4Address::GetAny (), 80);
  recvSink->Bind (local);
  recvSink->SetRecvCallback (MakeCallback (&ReceivePacket));

  Ptr<Socket> source = Socket::CreateSocket (c.Get (sourceNode), tid);
  InetSocketAddress remote = InetSocketAddress (i.GetAddress (sinkNode, 0), 80);
  source->Connect (remote);

  if (tracing == true)
    {
      AsciiTraceHelper ascii;
      wifiPhy.EnableAsciiAll (ascii.CreateFileStream ("wifi-simple-adhoc-grid.tr"));
      wifiPhy.EnablePcap ("wifi-simple-adhoc-grid", devices);
      // Trace routing tables
      Ptr<OutputStreamWrapper> routingStream = Create<OutputStreamWrapper> ("wifi-simple-adhoc-grid.routes", std::ios::out);
      olsr.PrintRoutingTableAllEvery (Seconds (2), routingStream);

      // To do-- enable an IP-level trace that shows forwarding events only
    }

  // Give OLSR time to converge-- 30 seconds perhaps
  Simulator::Schedule (Seconds (30.0), &GenerateTraffic, 
                       source, packetSize, numPackets, interPacketInterval);

  // Output what we are doing
  NS_LOG_UNCOND ("Testing from node " << sourceNode << " to " << sinkNode << " with grid distance " << distance);

  Simulator::Stop (Seconds (32.0));
  Simulator::Run ();
  Simulator::Destroy ();

  return 0;
}