// Return the inline-size that the float (including margins) will take up
// in the writing mode of the containing block. If this returns
// NS_UNCONSTRAINEDSIZE, we're dealing with an orthogonal block that
// has block-size:auto, and we'll need to actually reflow it to find out
// how much inline-size it will occupy in the containing block's mode.
static nscoord
FloatMarginISize(const nsHTMLReflowState& aCBReflowState,
nscoord aFloatAvailableISize,
nsIFrame *aFloat,
const nsCSSOffsetState& aFloatOffsetState)
{
AutoMaybeDisableFontInflation an(aFloat);
WritingMode wm = aFloatOffsetState.GetWritingMode();
LogicalSize floatSize =
aFloat->ComputeSize(
aCBReflowState.rendContext,
wm,
aCBReflowState.ComputedSize(wm),
aFloatAvailableISize,
aFloatOffsetState.ComputedLogicalMargin().Size(wm),
aFloatOffsetState.ComputedLogicalBorderPadding().Size(wm) -
aFloatOffsetState.ComputedLogicalPadding().Size(wm),
aFloatOffsetState.ComputedLogicalPadding().Size(wm),
nsIFrame::ComputeSizeFlags::eShrinkWrap);
WritingMode cbwm = aCBReflowState.GetWritingMode();
nscoord floatISize = floatSize.ConvertTo(cbwm, wm).ISize(cbwm);
if (floatISize == NS_UNCONSTRAINEDSIZE) {
return NS_UNCONSTRAINEDSIZE; // reflow is needed to get the true size
}
return floatISize +
aFloatOffsetState.ComputedLogicalMargin().Size(wm).
ConvertTo(cbwm, wm).ISize(cbwm) +
aFloatOffsetState.ComputedLogicalBorderPadding().Size(wm).
ConvertTo(cbwm, wm).ISize(cbwm);
}
// Only reflow the selected child ...
void
nsMathMLSelectedFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
aStatus = NS_FRAME_COMPLETE;
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
mBoundingMetrics = nsBoundingMetrics();
nsIFrame* childFrame = GetSelectedFrame();
if (childFrame) {
WritingMode wm = childFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState childReflowState(aPresContext, aReflowState,
childFrame, availSize);
ReflowChild(childFrame, aPresContext, aDesiredSize,
childReflowState, aStatus);
SaveReflowAndBoundingMetricsFor(childFrame, aDesiredSize,
aDesiredSize.mBoundingMetrics);
mBoundingMetrics = aDesiredSize.mBoundingMetrics;
}
FinalizeReflow(*aReflowState.rendContext, aDesiredSize);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
}
void
nsMeterFrame::ReflowBarFrame(nsIFrame* aBarFrame,
nsPresContext* aPresContext,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
bool vertical = ResolvedOrientationIsVertical();
WritingMode wm = aBarFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState reflowState(aPresContext, aReflowState,
aBarFrame, availSize);
nscoord size = vertical ? aReflowState.ComputedHeight()
: aReflowState.ComputedWidth();
nscoord xoffset = aReflowState.ComputedPhysicalBorderPadding().left;
nscoord yoffset = aReflowState.ComputedPhysicalBorderPadding().top;
// NOTE: Introduce a new function getPosition in the content part ?
HTMLMeterElement* meterElement = static_cast<HTMLMeterElement*>(mContent);
double max = meterElement->Max();
double min = meterElement->Min();
double value = meterElement->Value();
double position = max - min;
position = position != 0 ? (value - min) / position : 1;
size = NSToCoordRound(size * position);
if (!vertical && (wm.IsVertical() ? wm.IsVerticalRL() : !wm.IsBidiLTR())) {
xoffset += aReflowState.ComputedWidth() - size;
}
// The bar position is *always* constrained.
if (vertical) {
// We want the bar to begin at the bottom.
yoffset += aReflowState.ComputedHeight() - size;
size -= reflowState.ComputedPhysicalMargin().TopBottom() +
reflowState.ComputedPhysicalBorderPadding().TopBottom();
size = std::max(size, 0);
reflowState.SetComputedHeight(size);
} else {
size -= reflowState.ComputedPhysicalMargin().LeftRight() +
reflowState.ComputedPhysicalBorderPadding().LeftRight();
size = std::max(size, 0);
reflowState.SetComputedWidth(size);
}
xoffset += reflowState.ComputedPhysicalMargin().left;
yoffset += reflowState.ComputedPhysicalMargin().top;
nsHTMLReflowMetrics barDesiredSize(reflowState);
ReflowChild(aBarFrame, aPresContext, barDesiredSize, reflowState, xoffset,
yoffset, 0, aStatus);
FinishReflowChild(aBarFrame, aPresContext, barDesiredSize, &reflowState,
xoffset, yoffset, 0);
}
static nscoord
FloatMarginWidth(const nsHTMLReflowState& aCBReflowState,
nscoord aFloatAvailableWidth,
nsIFrame *aFloat,
const nsCSSOffsetState& aFloatOffsetState)
{
AutoMaybeDisableFontInflation an(aFloat);
WritingMode fosWM = aFloatOffsetState.GetWritingMode();
return aFloat->ComputeSize(
aCBReflowState.rendContext,
fosWM,
aCBReflowState.ComputedSize(fosWM),
aFloatAvailableWidth,
aFloatOffsetState.ComputedLogicalMargin().Size(fosWM),
aFloatOffsetState.ComputedLogicalBorderPadding().Size(fosWM),
aFloatOffsetState.ComputedLogicalPadding().Size(fosWM),
true).Width(fosWM) +
aFloatOffsetState.ComputedPhysicalMargin().LeftRight() +
aFloatOffsetState.ComputedPhysicalBorderPadding().LeftRight();
}
void
nsMathMLTokenFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
MarkInReflow();
mPresentationData.flags &= ~NS_MATHML_ERROR;
// initializations needed for empty markup like <mtag></mtag>
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
aDesiredSize.mBoundingMetrics = nsBoundingMetrics();
nsIFrame* childFrame = GetFirstPrincipalChild();
while (childFrame) {
// ask our children to compute their bounding metrics
nsHTMLReflowMetrics childDesiredSize(aReflowState.GetWritingMode(),
aDesiredSize.mFlags
| NS_REFLOW_CALC_BOUNDING_METRICS);
WritingMode wm = childFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState childReflowState(aPresContext, aReflowState,
childFrame, availSize);
ReflowChild(childFrame, aPresContext, childDesiredSize,
childReflowState, aStatus);
//NS_ASSERTION(NS_FRAME_IS_COMPLETE(aStatus), "bad status");
SaveReflowAndBoundingMetricsFor(childFrame, childDesiredSize,
childDesiredSize.mBoundingMetrics);
childFrame = childFrame->GetNextSibling();
}
// place and size children
FinalizeReflow(aReflowState.rendContext->GetDrawTarget(), aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aButtonDesiredSize,
const nsHTMLReflowState& aButtonReflowState,
nsIFrame* aFirstKid)
{
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
const nsMargin focusPadding = mRenderer.GetAddedButtonBorderAndPadding();
WritingMode wm = aFirstKid->GetWritingMode();
LogicalSize availSize = aButtonReflowState.ComputedSize(GetWritingMode());
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= LogicalMargin(wm, focusPadding).IStartEnd(wm);
// See whether out availSize's width is big enough. If it's smaller than our
// intrinsic min width, that means that the kid wouldn't really fit; for a
// better look in such cases we adjust the available width and our left
// offset to allow the kid to spill left into our padding.
nscoord xoffset = focusPadding.left +
aButtonReflowState.ComputedPhysicalBorderPadding().left;
nscoord extrawidth = GetMinISize(aButtonReflowState.rendContext) -
aButtonReflowState.ComputedWidth();
if (extrawidth > 0) {
nscoord extraleft = extrawidth / 2;
nscoord extraright = extrawidth - extraleft;
NS_ASSERTION(extraright >=0, "How'd that happen?");
// Do not allow the extras to be bigger than the relevant padding
extraleft = std::min(extraleft, aButtonReflowState.ComputedPhysicalPadding().left);
extraright = std::min(extraright, aButtonReflowState.ComputedPhysicalPadding().right);
xoffset -= extraleft;
availSize.Width(wm) = availSize.Width(wm) + extraleft + extraright;
}
availSize.Width(wm) = std::max(availSize.Width(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
nsHTMLReflowState adjustedButtonReflowState =
CloneReflowStateWithReducedContentBox(aButtonReflowState, focusPadding);
nsHTMLReflowState contentsReflowState(aPresContext,
adjustedButtonReflowState,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
nsHTMLReflowMetrics contentsDesiredSize(aButtonReflowState);
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowState,
xoffset,
focusPadding.top + aButtonReflowState.ComputedPhysicalBorderPadding().top,
0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box height:
nscoord buttonContentBoxHeight = 0;
if (aButtonReflowState.ComputedHeight() != NS_INTRINSICSIZE) {
// Button has a fixed height -- that's its content-box height.
buttonContentBoxHeight = aButtonReflowState.ComputedHeight();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' height, plus any focus-padding space:
buttonContentBoxHeight =
contentsDesiredSize.Height() + focusPadding.TopBottom();
// Make sure we obey min/max-height in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowState.ComputedHeight()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxHeight and
// mComputedMinHeight are content heights.
buttonContentBoxHeight =
NS_CSS_MINMAX(buttonContentBoxHeight,
aButtonReflowState.ComputedMinHeight(),
aButtonReflowState.ComputedMaxHeight());
}
// Center child vertically in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBoxHeight - focusPadding.TopBottom() -
contentsDesiredSize.Height();
nscoord yoffset = std::max(0, extraSpace / 2);
// Adjust yoffset to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
yoffset += focusPadding.top + aButtonReflowState.ComputedPhysicalBorderPadding().top;
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowState,
xoffset, yoffset, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
nsHTMLReflowMetrics::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowState.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.Width() = aButtonReflowState.ComputedWidth() +
aButtonReflowState.ComputedPhysicalBorderPadding().LeftRight();
aButtonDesiredSize.Height() = buttonContentBoxHeight +
aButtonReflowState.ComputedPhysicalBorderPadding().TopBottom();
// * Button's ascent is its child's ascent, plus the child's y-offset
// within our frame:
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
yoffset);
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}
void
nsMathMLmrootFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
MarkInReflow();
nsReflowStatus childStatus;
mPresentationData.flags &= ~NS_MATHML_ERROR;
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
nsBoundingMetrics bmSqr, bmBase, bmIndex;
DrawTarget* drawTarget = aReflowState.rendContext->GetDrawTarget();
//////////////////
// Reflow Children
int32_t count = 0;
nsIFrame* baseFrame = nullptr;
nsIFrame* indexFrame = nullptr;
nsHTMLReflowMetrics baseSize(aReflowState);
nsHTMLReflowMetrics indexSize(aReflowState);
nsIFrame* childFrame = mFrames.FirstChild();
while (childFrame) {
// ask our children to compute their bounding metrics
nsHTMLReflowMetrics childDesiredSize(aReflowState,
aDesiredSize.mFlags
| NS_REFLOW_CALC_BOUNDING_METRICS);
WritingMode wm = childFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState childReflowState(aPresContext, aReflowState,
childFrame, availSize);
ReflowChild(childFrame, aPresContext,
childDesiredSize, childReflowState, childStatus);
//NS_ASSERTION(NS_FRAME_IS_COMPLETE(childStatus), "bad status");
if (0 == count) {
// base
baseFrame = childFrame;
baseSize = childDesiredSize;
bmBase = childDesiredSize.mBoundingMetrics;
}
else if (1 == count) {
// index
indexFrame = childFrame;
indexSize = childDesiredSize;
bmIndex = childDesiredSize.mBoundingMetrics;
}
count++;
childFrame = childFrame->GetNextSibling();
}
if (2 != count) {
// report an error, encourage people to get their markups in order
ReportChildCountError();
ReflowError(drawTarget, aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
// Call DidReflow() for the child frames we successfully did reflow.
DidReflowChildren(mFrames.FirstChild(), childFrame);
return;
}
////////////
// Prepare the radical symbol and the overline bar
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
nscoord ruleThickness, leading, psi;
GetRadicalParameters(fm, StyleFont()->mMathDisplay ==
NS_MATHML_DISPLAYSTYLE_BLOCK,
ruleThickness, leading, psi);
// built-in: adjust clearance psi to emulate \mathstrut using '1' (TexBook, p.131)
char16_t one = '1';
nsBoundingMetrics bmOne =
nsLayoutUtils::AppUnitBoundsOfString(&one, 1, *fm, drawTarget);
if (bmOne.ascent > bmBase.ascent)
psi += bmOne.ascent - bmBase.ascent;
// make sure that the rule appears on on screen
nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);
if (ruleThickness < onePixel) {
ruleThickness = onePixel;
}
// adjust clearance psi to get an exact number of pixels -- this
// gives a nicer & uniform look on stacked radicals (bug 130282)
nscoord delta = psi % onePixel;
if (delta)
psi += onePixel - delta; // round up
// Stretch the radical symbol to the appropriate height if it is not big enough.
nsBoundingMetrics contSize = bmBase;
contSize.descent = bmBase.ascent + bmBase.descent + psi;
contSize.ascent = ruleThickness;
// height(radical) should be >= height(base) + psi + ruleThickness
nsBoundingMetrics radicalSize;
mSqrChar.Stretch(aPresContext, drawTarget,
fontSizeInflation,
NS_STRETCH_DIRECTION_VERTICAL,
contSize, radicalSize,
NS_STRETCH_LARGER,
StyleVisibility()->mDirection);
// radicalSize have changed at this point, and should match with
// the bounding metrics of the char
mSqrChar.GetBoundingMetrics(bmSqr);
// Update the desired size for the container (like msqrt, index is not yet included)
// the baseline will be that of the base.
mBoundingMetrics.ascent = bmBase.ascent + psi + ruleThickness;
mBoundingMetrics.descent =
std::max(bmBase.descent,
(bmSqr.ascent + bmSqr.descent - mBoundingMetrics.ascent));
mBoundingMetrics.width = bmSqr.width + bmBase.width;
mBoundingMetrics.leftBearing = bmSqr.leftBearing;
mBoundingMetrics.rightBearing = bmSqr.width +
std::max(bmBase.width, bmBase.rightBearing); // take also care of the rule
aDesiredSize.SetBlockStartAscent(mBoundingMetrics.ascent + leading);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
std::max(baseSize.Height() - baseSize.BlockStartAscent(),
mBoundingMetrics.descent + ruleThickness);
aDesiredSize.Width() = mBoundingMetrics.width;
/////////////
// Re-adjust the desired size to include the index.
// the index is raised by some fraction of the height
// of the radical, see \mroot macro in App. B, TexBook
float raiseIndexPercent = 0.6f;
gfxFont* mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();
if (mathFont) {
raiseIndexPercent =
mathFont->GetMathConstant(gfxFontEntry::RadicalDegreeBottomRaisePercent);
}
nscoord raiseIndexDelta = NSToCoordRound(raiseIndexPercent *
(bmSqr.ascent + bmSqr.descent));
nscoord indexRaisedAscent = mBoundingMetrics.ascent // top of radical
- (bmSqr.ascent + bmSqr.descent) // to bottom of radical
+ raiseIndexDelta + bmIndex.ascent + bmIndex.descent; // to top of raised index
nscoord indexClearance = 0;
if (mBoundingMetrics.ascent < indexRaisedAscent) {
indexClearance =
indexRaisedAscent - mBoundingMetrics.ascent; // excess gap introduced by a tall index
mBoundingMetrics.ascent = indexRaisedAscent;
nscoord descent = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();
aDesiredSize.SetBlockStartAscent(mBoundingMetrics.ascent + leading);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() + descent;
}
nscoord dxIndex, dxSqr;
GetRadicalXOffsets(bmIndex.width, bmSqr.width, fm, &dxIndex, &dxSqr);
mBoundingMetrics.width = dxSqr + bmSqr.width + bmBase.width;
mBoundingMetrics.leftBearing =
std::min(dxIndex + bmIndex.leftBearing, dxSqr + bmSqr.leftBearing);
mBoundingMetrics.rightBearing = dxSqr + bmSqr.width +
std::max(bmBase.width, bmBase.rightBearing);
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
GatherAndStoreOverflow(&aDesiredSize);
// place the index
nscoord dx = dxIndex;
nscoord dy = aDesiredSize.BlockStartAscent() -
(indexRaisedAscent + indexSize.BlockStartAscent() - bmIndex.ascent);
FinishReflowChild(indexFrame, aPresContext, indexSize, nullptr,
MirrorIfRTL(aDesiredSize.Width(), indexSize.Width(), dx),
dy, 0);
// place the radical symbol and the radical bar
dx = dxSqr;
dy = indexClearance + leading; // leave a leading at the top
mSqrChar.SetRect(nsRect(MirrorIfRTL(aDesiredSize.Width(), bmSqr.width, dx),
dy, bmSqr.width, bmSqr.ascent + bmSqr.descent));
dx += bmSqr.width;
mBarRect.SetRect(MirrorIfRTL(aDesiredSize.Width(), bmBase.width, dx),
dy, bmBase.width, ruleThickness);
// place the base
dy = aDesiredSize.BlockStartAscent() - baseSize.BlockStartAscent();
FinishReflowChild(baseFrame, aPresContext, baseSize, nullptr,
MirrorIfRTL(aDesiredSize.Width(), baseSize.Width(), dx),
dy, 0);
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
}
void
nsRangeFrame::ReflowAnonymousContent(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState)
{
// The width/height of our content box, which is the available width/height
// for our anonymous content:
nscoord rangeFrameContentBoxWidth = aReflowState.ComputedWidth();
nscoord rangeFrameContentBoxHeight = aReflowState.ComputedHeight();
if (rangeFrameContentBoxHeight == NS_AUTOHEIGHT) {
rangeFrameContentBoxHeight = 0;
}
nsIFrame* trackFrame = mTrackDiv->GetPrimaryFrame();
if (trackFrame) { // display:none?
// Position the track:
// The idea here is that we allow content authors to style the width,
// height, border and padding of the track, but we ignore margin and
// positioning properties and do the positioning ourself to keep the center
// of the track's border box on the center of the nsRangeFrame's content
// box.
WritingMode wm = trackFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState trackReflowState(aPresContext, aReflowState,
trackFrame, availSize);
// Find the x/y position of the track frame such that it will be positioned
// as described above. These coordinates are with respect to the
// nsRangeFrame's border-box.
nscoord trackX = rangeFrameContentBoxWidth / 2;
nscoord trackY = rangeFrameContentBoxHeight / 2;
// Account for the track's border and padding (we ignore its margin):
trackX -= trackReflowState.ComputedPhysicalBorderPadding().left +
trackReflowState.ComputedWidth() / 2;
trackY -= trackReflowState.ComputedPhysicalBorderPadding().top +
trackReflowState.ComputedHeight() / 2;
// Make relative to our border box instead of our content box:
trackX += aReflowState.ComputedPhysicalBorderPadding().left;
trackY += aReflowState.ComputedPhysicalBorderPadding().top;
nsReflowStatus frameStatus;
nsHTMLReflowMetrics trackDesiredSize(aReflowState);
ReflowChild(trackFrame, aPresContext, trackDesiredSize,
trackReflowState, trackX, trackY, 0, frameStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(frameStatus),
"We gave our child unconstrained height, so it should be complete");
FinishReflowChild(trackFrame, aPresContext, trackDesiredSize,
&trackReflowState, trackX, trackY, 0);
}
nsIFrame* thumbFrame = mThumbDiv->GetPrimaryFrame();
if (thumbFrame) { // display:none?
WritingMode wm = thumbFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState thumbReflowState(aPresContext, aReflowState,
thumbFrame, availSize);
// Where we position the thumb depends on its size, so we first reflow
// the thumb at {0,0} to obtain its size, then position it afterwards.
nsReflowStatus frameStatus;
nsHTMLReflowMetrics thumbDesiredSize(aReflowState);
ReflowChild(thumbFrame, aPresContext, thumbDesiredSize,
thumbReflowState, 0, 0, 0, frameStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(frameStatus),
"We gave our child unconstrained height, so it should be complete");
FinishReflowChild(thumbFrame, aPresContext, thumbDesiredSize,
&thumbReflowState, 0, 0, 0);
DoUpdateThumbPosition(thumbFrame, nsSize(aDesiredSize.Width(),
aDesiredSize.Height()));
}
nsIFrame* rangeProgressFrame = mProgressDiv->GetPrimaryFrame();
if (rangeProgressFrame) { // display:none?
WritingMode wm = rangeProgressFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState progressReflowState(aPresContext, aReflowState,
rangeProgressFrame, availSize);
// We first reflow the range-progress frame at {0,0} to obtain its
// unadjusted dimensions, then we adjust it to so that the appropriate edge
// ends at the thumb.
nsReflowStatus frameStatus;
nsHTMLReflowMetrics progressDesiredSize(aReflowState);
ReflowChild(rangeProgressFrame, aPresContext,
progressDesiredSize, progressReflowState, 0, 0,
0, frameStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(frameStatus),
"We gave our child unconstrained height, so it should be complete");
FinishReflowChild(rangeProgressFrame, aPresContext,
progressDesiredSize, &progressReflowState, 0, 0, 0);
DoUpdateRangeProgressFrame(rangeProgressFrame, nsSize(aDesiredSize.Width(),
aDesiredSize.Height()));
}
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aButtonDesiredSize,
const nsHTMLReflowState& aButtonReflowState,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
LogicalSize availSize = aButtonReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// See whether out availSize's inline-size is big enough. If it's
// smaller than our intrinsic min iSize, that means that the kid
// wouldn't really fit. In that case, we overflow into our internal
// focuspadding (which other browsers don't have) so that there's a
// little more space for it.
// Note that GetMinISize includes the focusPadding.
nscoord IOverflow = GetMinISize(aButtonReflowState.rendContext) -
aButtonReflowState.ComputedISize();
nscoord IFocusPadding = focusPadding.IStartEnd(wm);
nscoord focusPaddingReduction = std::min(IFocusPadding,
std::max(IOverflow, 0));
if (focusPaddingReduction > 0) {
nscoord startReduction = focusPadding.IStart(wm);
if (focusPaddingReduction != IFocusPadding) {
startReduction = NSToCoordRound(startReduction *
(float(focusPaddingReduction) /
float(IFocusPadding)));
}
focusPadding.IStart(wm) -= startReduction;
focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
}
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowState.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
LogicalPoint childPos(wm);
childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
nsHTMLReflowState adjustedButtonReflowState =
CloneReflowStateWithReducedContentBox(aButtonReflowState,
focusPadding.GetPhysicalMargin(wm));
nsHTMLReflowState contentsReflowState(aPresContext,
adjustedButtonReflowState,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
nsHTMLReflowMetrics contentsDesiredSize(aButtonReflowState);
childPos.B(wm) = 0; // This will be set properly later, after reflowing the
// child to determine its size.
// We just pass a dummy containerSize here, as the child will be
// repositioned later by FinishReflowChild.
nsSize dummyContainerSize;
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowState,
wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box size:
LogicalSize buttonContentBox(wm);
if (aButtonReflowState.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBox.BSize(wm) = aButtonReflowState.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBox.BSize(wm) =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowState.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBox.BSize(wm) =
NS_CSS_MINMAX(buttonContentBox.BSize(wm),
aButtonReflowState.ComputedMinBSize(),
aButtonReflowState.ComputedMaxBSize());
}
if (aButtonReflowState.ComputedISize() != NS_INTRINSICSIZE) {
buttonContentBox.ISize(wm) = aButtonReflowState.ComputedISize();
} else {
buttonContentBox.ISize(wm) =
contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
buttonContentBox.ISize(wm) =
NS_CSS_MINMAX(buttonContentBox.ISize(wm),
aButtonReflowState.ComputedMinISize(),
aButtonReflowState.ComputedMaxISize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
childPos.B(wm) = std::max(0, extraSpace / 2);
// Adjust childPos.B() to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);
nsSize containerSize =
(buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowState,
wm, childPos, containerSize, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
nsHTMLReflowMetrics::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowState.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowState.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
childPos.B(wm));
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}
void
nsProgressFrame::ReflowBarFrame(nsIFrame* aBarFrame,
nsPresContext* aPresContext,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
bool vertical = ResolvedOrientationIsVertical();
WritingMode wm = aBarFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState reflowState(aPresContext, aReflowState,
aBarFrame, availSize);
nscoord size = vertical ? aReflowState.ComputedHeight()
: aReflowState.ComputedWidth();
nscoord xoffset = aReflowState.ComputedPhysicalBorderPadding().left;
nscoord yoffset = aReflowState.ComputedPhysicalBorderPadding().top;
double position = static_cast<HTMLProgressElement*>(mContent)->Position();
// Force the bar's size to match the current progress.
// When indeterminate, the progress' size will be 100%.
if (position >= 0.0) {
size *= position;
}
if (!vertical && (wm.IsVertical() ? wm.IsVerticalRL() : !wm.IsBidiLTR())) {
xoffset += aReflowState.ComputedWidth() - size;
}
// The bar size is fixed in these cases:
// - the progress position is determined: the bar size is fixed according
// to it's value.
// - the progress position is indeterminate and the bar appearance should be
// shown as native: the bar size is forced to 100%.
// Otherwise (when the progress is indeterminate and the bar appearance isn't
// native), the bar size isn't fixed and can be set by the author.
if (position != -1 || ShouldUseNativeStyle()) {
if (vertical) {
// We want the bar to begin at the bottom.
yoffset += aReflowState.ComputedHeight() - size;
size -= reflowState.ComputedPhysicalMargin().TopBottom() +
reflowState.ComputedPhysicalBorderPadding().TopBottom();
size = std::max(size, 0);
reflowState.SetComputedHeight(size);
} else {
size -= reflowState.ComputedPhysicalMargin().LeftRight() +
reflowState.ComputedPhysicalBorderPadding().LeftRight();
size = std::max(size, 0);
reflowState.SetComputedWidth(size);
}
} else if (vertical) {
// For vertical progress bars, we need to position the bar specificly when
// the width isn't constrained (position == -1 and !ShouldUseNativeStyle())
// because aReflowState.ComputedHeight() - size == 0.
yoffset += aReflowState.ComputedHeight() - reflowState.ComputedHeight();
}
xoffset += reflowState.ComputedPhysicalMargin().left;
yoffset += reflowState.ComputedPhysicalMargin().top;
nsHTMLReflowMetrics barDesiredSize(aReflowState);
ReflowChild(aBarFrame, aPresContext, barDesiredSize, reflowState, xoffset,
yoffset, 0, aStatus);
FinishReflowChild(aBarFrame, aPresContext, barDesiredSize, &reflowState,
xoffset, yoffset, 0);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aButtonDesiredSize,
const nsHTMLReflowState& aButtonReflowState,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
bool isVertical = wm.IsVertical();
LogicalSize availSize = aButtonReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
const LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowState.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
// See whether out availSize's inline-size is big enough. If it's smaller than
// our intrinsic min iSize, that means that the kid wouldn't really fit; for a
// better look in such cases we adjust the available iSize and our inline-start
// offset to allow the kid to spill start-wards into our padding.
nscoord ioffset = focusPadding.IStart(wm) + clbp.IStart(wm);
nscoord extraISize = GetMinISize(aButtonReflowState.rendContext) -
aButtonReflowState.ComputedISize();
if (extraISize > 0) {
nscoord extraIStart = extraISize / 2;
nscoord extraIEnd = extraISize - extraIStart;
NS_ASSERTION(extraIEnd >=0, "How'd that happen?");
// Do not allow the extras to be bigger than the relevant padding
const LogicalMargin& padding = aButtonReflowState.ComputedLogicalPadding();
extraIStart = std::min(extraIStart, padding.IStart(wm));
extraIEnd = std::min(extraIEnd, padding.IEnd(wm));
ioffset -= extraIStart;
availSize.ISize(wm) = availSize.ISize(wm) + extraIStart + extraIEnd;
}
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
nsHTMLReflowState adjustedButtonReflowState =
CloneReflowStateWithReducedContentBox(aButtonReflowState,
focusPadding.GetPhysicalMargin(wm));
nsHTMLReflowState contentsReflowState(aPresContext,
adjustedButtonReflowState,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
nsHTMLReflowMetrics contentsDesiredSize(aButtonReflowState);
nscoord boffset = focusPadding.BStart(wm) + clbp.BStart(wm);
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowState,
isVertical ? boffset : ioffset,
isVertical ? ioffset : boffset,
0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box height:
nscoord buttonContentBoxBSize = 0;
if (aButtonReflowState.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBoxBSize = aButtonReflowState.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBoxBSize =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowState.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBoxBSize =
NS_CSS_MINMAX(buttonContentBoxBSize,
aButtonReflowState.ComputedMinBSize(),
aButtonReflowState.ComputedMaxBSize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBoxBSize - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
boffset = std::max(0, extraSpace / 2);
// Adjust boffset to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
boffset += focusPadding.BStart(wm) + clbp.BStart(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowState,
isVertical ? boffset : ioffset,
isVertical ? ioffset : boffset,
0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
nsHTMLReflowMetrics::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowState.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowState.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBoxBSize + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
boffset);
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowState, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
// The width of our content box, which is the available width
// for our anonymous content:
const nscoord contentBoxWidth = aReflowState.ComputedWidth();
nscoord contentBoxHeight = aReflowState.ComputedHeight();
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxHeight == NS_INTRINSICSIZE) {
contentBoxHeight = 0;
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
nsHTMLReflowMetrics wrappersDesiredSize(aReflowState);
WritingMode wm = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState wrapperReflowState(aPresContext, aReflowState,
outerWrapperFrame, availSize);
// offsets of wrapper frame
nscoord xoffset = aReflowState.ComputedPhysicalBorderPadding().left +
wrapperReflowState.ComputedPhysicalMargin().left;
nscoord yoffset = aReflowState.ComputedPhysicalBorderPadding().top +
wrapperReflowState.ComputedPhysicalMargin().top;
nsReflowStatus childStatus;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowState, xoffset, yoffset, 0, childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained height, so it should be complete");
nscoord wrappersMarginBoxHeight = wrappersDesiredSize.Height() +
wrapperReflowState.ComputedPhysicalMargin().TopBottom();
if (contentBoxHeight == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// height:
contentBoxHeight = wrappersMarginBoxHeight;
// Make sure we obey min/max-height in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowState.ComputedHeight()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxHeight and
// mComputedMinHeight are content heights.
contentBoxHeight =
NS_CSS_MINMAX(contentBoxHeight,
aReflowState.ComputedMinHeight(),
aReflowState.ComputedMaxHeight());
}
// Center child vertically
nscoord extraSpace = contentBoxHeight - wrappersMarginBoxHeight;
yoffset += std::max(0, extraSpace / 2);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowState, xoffset, yoffset, 0);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowState.GetWritingMode(),
contentBoxWidth));
}
aDesiredSize.Width() = contentBoxWidth +
aReflowState.ComputedPhysicalBorderPadding().LeftRight();
aDesiredSize.Height() = contentBoxHeight +
aReflowState.ComputedPhysicalBorderPadding().TopBottom();
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
}
bool
nsBlockReflowContext::ComputeCollapsedBStartMargin(const nsHTMLReflowState& aRS,
nsCollapsingMargin* aMargin,
nsIFrame* aClearanceFrame,
bool* aMayNeedRetry,
bool* aBlockIsEmpty)
{
WritingMode wm = aRS.GetWritingMode();
WritingMode parentWM = mMetrics.GetWritingMode();
// Include block-start element of frame's margin
aMargin->Include(aRS.ComputedLogicalMargin().ConvertTo(parentWM, wm).BStart(parentWM));
// The inclusion of the block-end margin when empty is done by the caller
// since it doesn't need to be done by the top-level (non-recursive)
// caller.
#ifdef NOISY_BLOCKDIR_MARGINS
nsFrame::ListTag(stdout, aRS.frame);
printf(": %d => %d\n", aRS.ComputedLogicalMargin().BStart(wm), aMargin->get());
#endif
bool dirtiedLine = false;
bool setBlockIsEmpty = false;
// Calculate the frame's generational block-start-margin from its child
// blocks. Note that if the frame has a non-zero block-start-border or
// block-start-padding then this step is skipped because it will be a margin
// root. It is also skipped if the frame is a margin root for other
// reasons.
nsIFrame* frame = DescendIntoBlockLevelFrame(aRS.frame);
nsPresContext* prescontext = frame->PresContext();
nsBlockFrame* block = nullptr;
if (0 == aRS.ComputedLogicalBorderPadding().BStart(wm)) {
block = nsLayoutUtils::GetAsBlock(frame);
if (block) {
bool bStartMarginRoot, unused;
block->IsMarginRoot(&bStartMarginRoot, &unused);
if (bStartMarginRoot) {
block = nullptr;
}
}
}
// iterate not just through the lines of 'block' but also its
// overflow lines and the normal and overflow lines of its next in
// flows. Note that this will traverse some frames more than once:
// for example, if A contains B and A->nextinflow contains
// B->nextinflow, we'll traverse B->nextinflow twice. But this is
// OK because our traversal is idempotent.
for ( ;block; block = static_cast<nsBlockFrame*>(block->GetNextInFlow())) {
for (int overflowLines = 0; overflowLines <= 1; ++overflowLines) {
nsBlockFrame::line_iterator line;
nsBlockFrame::line_iterator line_end;
bool anyLines = true;
if (overflowLines) {
nsBlockFrame::FrameLines* frames = block->GetOverflowLines();
nsLineList* lines = frames ? &frames->mLines : nullptr;
if (!lines) {
anyLines = false;
} else {
line = lines->begin();
line_end = lines->end();
}
} else {
line = block->begin_lines();
line_end = block->end_lines();
}
for (; anyLines && line != line_end; ++line) {
if (!aClearanceFrame && line->HasClearance()) {
// If we don't have a clearance frame, then we're computing
// the collapsed margin in the first pass, assuming that all
// lines have no clearance. So clear their clearance flags.
line->ClearHasClearance();
line->MarkDirty();
dirtiedLine = true;
}
bool isEmpty;
if (line->IsInline()) {
isEmpty = line->IsEmpty();
} else {
nsIFrame* kid = line->mFirstChild;
if (kid == aClearanceFrame) {
line->SetHasClearance();
line->MarkDirty();
dirtiedLine = true;
goto done;
}
// Here is where we recur. Now that we have determined that a
// generational collapse is required we need to compute the
// child blocks margin and so in so that we can look into
// it. For its margins to be computed we need to have a reflow
// state for it.
// We may have to construct an extra reflow state here if
// we drilled down through a block wrapper. At the moment
// we can only drill down one level so we only have to support
// one extra reflow state.
const nsHTMLReflowState* outerReflowState = &aRS;
if (frame != aRS.frame) {
NS_ASSERTION(frame->GetParent() == aRS.frame,
"Can only drill through one level of block wrapper");
LogicalSize availSpace = aRS.ComputedSize(frame->GetWritingMode());
outerReflowState = new nsHTMLReflowState(prescontext,
aRS, frame, availSpace);
}
{
LogicalSize availSpace =
outerReflowState->ComputedSize(kid->GetWritingMode());
nsHTMLReflowState innerReflowState(prescontext,
*outerReflowState, kid,
availSpace);
// Record that we're being optimistic by assuming the kid
// has no clearance
if (kid->StyleDisplay()->mBreakType != NS_STYLE_CLEAR_NONE) {
*aMayNeedRetry = true;
}
if (ComputeCollapsedBStartMargin(innerReflowState, aMargin,
aClearanceFrame, aMayNeedRetry,
&isEmpty)) {
line->MarkDirty();
dirtiedLine = true;
}
if (isEmpty) {
WritingMode innerWM = innerReflowState.GetWritingMode();
LogicalMargin innerMargin =
innerReflowState.ComputedLogicalMargin().ConvertTo(parentWM, innerWM);
aMargin->Include(innerMargin.BEnd(parentWM));
}
}
if (outerReflowState != &aRS) {
delete const_cast<nsHTMLReflowState*>(outerReflowState);
}
}
if (!isEmpty) {
if (!setBlockIsEmpty && aBlockIsEmpty) {
setBlockIsEmpty = true;
*aBlockIsEmpty = false;
}
goto done;
}
}
if (!setBlockIsEmpty && aBlockIsEmpty) {
// The first time we reach here is when this is the first block
// and we have processed all its normal lines.
setBlockIsEmpty = true;
// All lines are empty, or we wouldn't be here!
*aBlockIsEmpty = aRS.frame->IsSelfEmpty();
}
}
}
done:
if (!setBlockIsEmpty && aBlockIsEmpty) {
*aBlockIsEmpty = aRS.frame->IsEmpty();
}
#ifdef NOISY_BLOCKDIR_MARGINS
nsFrame::ListTag(stdout, aRS.frame);
printf(": => %d\n", aMargin->get());
#endif
return dirtiedLine;
}
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowState, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
const WritingMode myWM = aReflowState.GetWritingMode();
// The ISize of our content box, which is the available ISize
// for our anonymous content:
const nscoord contentBoxISize = aReflowState.ComputedISize();
nscoord contentBoxBSize = aReflowState.ComputedBSize();
// Figure out our border-box sizes as well (by adding borderPadding to
// content-box sizes):
const nscoord borderBoxISize = contentBoxISize +
aReflowState.ComputedLogicalBorderPadding().IStartEnd(myWM);
nscoord borderBoxBSize;
if (contentBoxBSize != NS_INTRINSICSIZE) {
borderBoxBSize = contentBoxBSize +
aReflowState.ComputedLogicalBorderPadding().BStartEnd(myWM);
} // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxBSize == NS_INTRINSICSIZE) {
contentBoxBSize = 0;
borderBoxBSize =
aReflowState.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
nsHTMLReflowMetrics wrappersDesiredSize(aReflowState);
WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wrapperWM);
availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState wrapperReflowState(aPresContext, aReflowState,
outerWrapperFrame, availSize);
// Convert wrapper margin into my own writing-mode (in case it differs):
LogicalMargin wrapperMargin =
wrapperReflowState.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);
// offsets of wrapper frame within this frame:
LogicalPoint
wrapperOffset(myWM,
aReflowState.ComputedLogicalBorderPadding().IStart(myWM) +
wrapperMargin.IStart(myWM),
aReflowState.ComputedLogicalBorderPadding().BStart(myWM) +
wrapperMargin.BStart(myWM));
nsReflowStatus childStatus;
// We initially reflow the child with a dummy containerSize; positioning
// will be fixed later.
const nsSize dummyContainerSize;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowState, myWM, wrapperOffset, dummyContainerSize, 0,
childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained available block-size, "
"so it should be complete");
nscoord wrappersMarginBoxBSize =
wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// block-size:
contentBoxBSize = wrappersMarginBoxBSize;
// Make sure we obey min/max-bsize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowState.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since ComputedMaxBSize and
// ComputedMinBSize are content heights.
contentBoxBSize =
NS_CSS_MINMAX(contentBoxBSize,
aReflowState.ComputedMinBSize(),
aReflowState.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowState.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
// Center child in block axis
nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);
// Needed in FinishReflowChild, for logical-to-physical conversion:
nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
GetPhysicalSize(myWM);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowState, myWM, wrapperOffset,
borderBoxSize, 0);
nsSize contentBoxSize =
LogicalSize(myWM, contentBoxISize, contentBoxBSize).
GetPhysicalSize(myWM);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowState.GetWritingMode(),
contentBoxSize));
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aDesiredSize.SetSize(myWM, logicalDesiredSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
}
bool
nsColumnSetFrame::ReflowChildren(nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
bool aUnboundedLastColumn,
nsCollapsingMargin* aBottomMarginCarriedOut,
ColumnBalanceData& aColData)
{
aColData.Reset();
bool allFit = true;
bool RTL = StyleVisibility()->mDirection == NS_STYLE_DIRECTION_RTL;
bool shrinkingHeightOnly = !NS_SUBTREE_DIRTY(this) &&
mLastBalanceHeight > aConfig.mColMaxHeight;
#ifdef DEBUG_roc
printf("*** Doing column reflow pass: mLastBalanceHeight=%d, mColMaxHeight=%d, RTL=%d\n, mBalanceColCount=%d, mColWidth=%d, mColGap=%d\n",
mLastBalanceHeight, aConfig.mColMaxHeight, RTL, aConfig.mBalanceColCount,
aConfig.mColWidth, aConfig.mColGap);
#endif
DrainOverflowColumns();
const bool colHeightChanged = mLastBalanceHeight != aConfig.mColMaxHeight;
if (colHeightChanged) {
mLastBalanceHeight = aConfig.mColMaxHeight;
// XXX Seems like this could fire if incremental reflow pushed the column set
// down so we reflow incrementally with a different available height.
// We need a way to do an incremental reflow and be sure availableHeight
// changes are taken account of! Right now I think block frames with absolute
// children might exit early.
//NS_ASSERTION(aKidReason != eReflowReason_Incremental,
// "incremental reflow should not have changed the balance height");
}
// get our border and padding
nsMargin borderPadding = aReflowState.ComputedPhysicalBorderPadding();
borderPadding.ApplySkipSides(GetSkipSides(&aReflowState));
nsRect contentRect(0, 0, 0, 0);
nsOverflowAreas overflowRects;
nsIFrame* child = mFrames.FirstChild();
nsPoint childOrigin = nsPoint(borderPadding.left, borderPadding.top);
// For RTL, figure out where the last column's left edge should be. Since the
// columns might not fill the frame exactly, we need to account for the
// slop. Otherwise we'll waste time moving the columns by some tiny
// amount unnecessarily.
if (RTL) {
nscoord availWidth = aReflowState.AvailableWidth();
if (aReflowState.ComputedWidth() != NS_INTRINSICSIZE) {
availWidth = aReflowState.ComputedWidth();
}
if (availWidth != NS_INTRINSICSIZE) {
childOrigin.x += availWidth - aConfig.mColWidth;
#ifdef DEBUG_roc
printf("*** childOrigin.x = %d\n", childOrigin.x);
#endif
}
}
int columnCount = 0;
int contentBEnd = 0;
bool reflowNext = false;
while (child) {
// Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
// skip if the next column is dirty, because the next column's first line(s)
// might be pullable back to this column. We can't skip if it's the last child
// because we need to obtain the bottom margin. We can't skip
// if this is the last column and we're supposed to assign unbounded
// height to it, because that could change the available height from
// the last time we reflowed it and we should try to pull all the
// content from its next sibling. (Note that it might be the last
// column, but not be the last child because the desired number of columns
// has changed.)
bool skipIncremental = !aReflowState.ShouldReflowAllKids()
&& !NS_SUBTREE_DIRTY(child)
&& child->GetNextSibling()
&& !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
&& !NS_SUBTREE_DIRTY(child->GetNextSibling());
// If we need to pull up content from the prev-in-flow then this is not just
// a height shrink. The prev in flow will have set the dirty bit.
// Check the overflow rect YMost instead of just the child's content height. The child
// may have overflowing content that cares about the available height boundary.
// (It may also have overflowing content that doesn't care about the available height
// boundary, but if so, too bad, this optimization is defeated.)
// We want scrollable overflow here since this is a calculation that
// affects layout.
bool skipResizeHeightShrink = shrinkingHeightOnly
&& child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxHeight;
nscoord childContentBEnd = 0;
WritingMode wm = child->GetWritingMode();
if (!reflowNext && (skipIncremental || skipResizeHeightShrink)) {
// This child does not need to be reflowed, but we may need to move it
MoveChildTo(this, child, childOrigin);
// If this is the last frame then make sure we get the right status
nsIFrame* kidNext = child->GetNextSibling();
if (kidNext) {
aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
? NS_FRAME_OVERFLOW_INCOMPLETE
: NS_FRAME_NOT_COMPLETE;
} else {
aStatus = mLastFrameStatus;
}
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
#ifdef DEBUG_roc
printf("*** Skipping child #%d %p (incremental %d, resize height shrink %d): status = %d\n",
columnCount, (void*)child, skipIncremental, skipResizeHeightShrink, aStatus);
#endif
} else {
nsSize physicalSize(aConfig.mColWidth, aConfig.mColMaxHeight);
if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
physicalSize.height = GetAvailableContentHeight(aReflowState);
}
LogicalSize availSize(wm, physicalSize);
LogicalSize computedSize = aReflowState.ComputedSize(wm);
if (reflowNext)
child->AddStateBits(NS_FRAME_IS_DIRTY);
nsHTMLReflowState kidReflowState(PresContext(), aReflowState, child,
availSize, availSize.ISize(wm),
computedSize.BSize(wm));
kidReflowState.mFlags.mIsTopOfPage = true;
kidReflowState.mFlags.mTableIsSplittable = false;
kidReflowState.mFlags.mIsColumnBalancing = aConfig.mBalanceColCount < INT32_MAX;
// We need to reflow any float placeholders, even if our column height
// hasn't changed.
kidReflowState.mFlags.mMustReflowPlaceholders = !colHeightChanged;
#ifdef DEBUG_roc
printf("*** Reflowing child #%d %p: availHeight=%d\n",
columnCount, (void*)child,availSize.BSize(wm));
#endif
// Note if the column's next in flow is not being changed by this incremental reflow.
// This may allow the current column to avoid trying to pull lines from the next column.
if (child->GetNextSibling() &&
!(GetStateBits() & NS_FRAME_IS_DIRTY) &&
!(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
kidReflowState.mFlags.mNextInFlowUntouched = true;
}
nsHTMLReflowMetrics kidDesiredSize(wm, aDesiredSize.mFlags);
// XXX it would be cool to consult the float manager for the
// previous block to figure out the region of floats from the
// previous column that extend into this column, and subtract
// that region from the new float manager. So you could stick a
// really big float in the first column and text in following
// columns would flow around it.
// Reflow the frame
ReflowChild(child, PresContext(), kidDesiredSize, kidReflowState,
childOrigin.x + kidReflowState.ComputedPhysicalMargin().left,
childOrigin.y + kidReflowState.ComputedPhysicalMargin().top,
0, aStatus);
reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;
#ifdef DEBUG_roc
printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d CarriedOutBottomMargin=%d\n",
columnCount, (void*)child, aStatus, kidDesiredSize.Width(), kidDesiredSize.Height(),
kidDesiredSize.mCarriedOutBEndMargin.get());
#endif
NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);
*aBottomMarginCarriedOut = kidDesiredSize.mCarriedOutBEndMargin;
FinishReflowChild(child, PresContext(), kidDesiredSize,
&kidReflowState, childOrigin.x, childOrigin.y, 0);
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
if (childContentBEnd > aConfig.mColMaxHeight) {
allFit = false;
}
if (childContentBEnd > availSize.BSize(wm)) {
aColData.mMaxOverflowingHeight = std::max(childContentBEnd,
aColData.mMaxOverflowingHeight);
}
}
contentRect.UnionRect(contentRect, child->GetRect());
ConsiderChildOverflow(overflowRects, child);
contentBEnd = std::max(contentBEnd, childContentBEnd);
aColData.mLastHeight = childContentBEnd;
aColData.mSumHeight += childContentBEnd;
// Build a continuation column if necessary
nsIFrame* kidNextInFlow = child->GetNextInFlow();
if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
child = nullptr;
break;
} else {
++columnCount;
// Make sure that the column has a next-in-flow. If not, we must
// create one to hold the overflowing stuff, even if we're just
// going to put it on our overflow list and let *our*
// next in flow handle it.
if (!kidNextInFlow) {
NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
"We have to create a continuation, but the block doesn't want us to reflow it?");
// We need to create a continuing column
nsresult rv = CreateNextInFlow(child, kidNextInFlow);
if (NS_FAILED(rv)) {
NS_NOTREACHED("Couldn't create continuation");
child = nullptr;
break;
}
}
// Make sure we reflow a next-in-flow when it switches between being
// normal or overflow container
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
}
else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
if ((contentBEnd > aReflowState.ComputedMaxBSize() ||
contentBEnd > aReflowState.ComputedBSize()) &&
aConfig.mBalanceColCount < INT32_MAX) {
// We overflowed vertically, but have not exceeded the number of
// columns. We're going to go into overflow columns now, so balancing
// no longer applies.
aColData.mHasExcessHeight = true;
}
if (columnCount >= aConfig.mBalanceColCount) {
// No more columns allowed here. Stop.
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
// Move any of our leftover columns to our overflow list. Our
// next-in-flow will eventually pick them up.
const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
if (continuationColumns.NotEmpty()) {
SetOverflowFrames(continuationColumns);
}
child = nullptr;
break;
}
}
if (PresContext()->HasPendingInterrupt()) {
// Stop the loop now while |child| still points to the frame that bailed
// out. We could keep going here and condition a bunch of the code in
// this loop on whether there's an interrupt, or even just keep going and
// trying to reflow the blocks (even though we know they'll interrupt
// right after their first line), but stopping now is conceptually the
// simplest (and probably fastest) thing.
break;
}
// Advance to the next column
child = child->GetNextSibling();
if (child) {
if (!RTL) {
childOrigin.x += aConfig.mColWidth + aConfig.mColGap;
} else {
childOrigin.x -= aConfig.mColWidth + aConfig.mColGap;
}
#ifdef DEBUG_roc
printf("*** NEXT CHILD ORIGIN.x = %d\n", childOrigin.x);
#endif
}
}
if (PresContext()->CheckForInterrupt(this) &&
(GetStateBits() & NS_FRAME_IS_DIRTY)) {
// Mark all our kids starting with |child| dirty
// Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
// because we might have interrupted while reflowing |child|, and since
// we're about to add a dirty bit to |child| we need to make sure that
// |this| is scheduled to have dirty bits marked on it and its ancestors.
// Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
// bail out immediately, since it'll already have a dirty bit.
for (; child; child = child->GetNextSibling()) {
child->AddStateBits(NS_FRAME_IS_DIRTY);
}
}
aColData.mMaxHeight = contentBEnd;
contentRect.height = std::max(contentRect.height, contentBEnd);
mLastFrameStatus = aStatus;
// contentRect included the borderPadding.left,borderPadding.top of the child rects
contentRect -= nsPoint(borderPadding.left, borderPadding.top);
WritingMode wm = aReflowState.GetWritingMode();
LogicalSize contentSize(wm, nsSize(contentRect.XMost(), contentRect.YMost()));
// Apply computed and min/max values
// (aConfig members need to be converted from Width/Height to ISize/BSize)
if (aConfig.mComputedHeight != NS_INTRINSICSIZE) {
if (aReflowState.AvailableHeight() != NS_INTRINSICSIZE) {
contentSize.BSize(wm) = std::min(contentSize.BSize(wm),
aConfig.mComputedHeight);
} else {
contentSize.BSize(wm) = aConfig.mComputedHeight;
}
} else {
// We add the "consumed" height back in so that we're applying
// constraints to the correct height value, then subtract it again
// after we've finished with the min/max calculation. This prevents us from
// having a last continuation that is smaller than the min height. but which
// has prev-in-flows, trigger a larger height than actually required.
contentSize.BSize(wm) =
aReflowState.ApplyMinMaxHeight(contentSize.BSize(wm),
aConfig.mConsumedHeight);
}
if (aReflowState.ComputedISize() != NS_INTRINSICSIZE) {
contentSize.ISize(wm) = aReflowState.ComputedISize();
} else {
contentSize.ISize(wm) =
aReflowState.ApplyMinMaxWidth(contentSize.ISize(wm));
}
LogicalMargin bp(wm, borderPadding);
contentSize.ISize(wm) += bp.IStartEnd(wm);
contentSize.BSize(wm) += bp.BStartEnd(wm);
aDesiredSize.SetSize(wm, contentSize);
aDesiredSize.mOverflowAreas = overflowRects;
aDesiredSize.UnionOverflowAreasWithDesiredBounds();
#ifdef DEBUG_roc
printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus);
}
void
nsAbsoluteContainingBlock::ReflowAbsoluteFrame(nsIFrame* aDelegatingFrame,
nsPresContext* aPresContext,
const nsHTMLReflowState& aReflowState,
const nsRect& aContainingBlock,
bool aConstrainHeight,
nsIFrame* aKidFrame,
nsReflowStatus& aStatus,
nsOverflowAreas* aOverflowAreas)
{
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent);
printf("abs pos ");
if (aKidFrame) {
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
}
char width[16];
char height[16];
PrettyUC(aReflowState.AvailableWidth(), width);
PrettyUC(aReflowState.AvailableHeight(), height);
printf(" a=%s,%s ", width, height);
PrettyUC(aReflowState.ComputedWidth(), width);
PrettyUC(aReflowState.ComputedHeight(), height);
printf("c=%s,%s \n", width, height);
}
AutoNoisyIndenter indent(nsBlockFrame::gNoisy);
#endif // DEBUG
WritingMode wm = aKidFrame->GetWritingMode();
nscoord availISize = LogicalSize(wm, aContainingBlock.Size()).ISize(wm);
if (availISize == -1) {
NS_ASSERTION(aReflowState.ComputedSize(wm).ISize(wm) !=
NS_UNCONSTRAINEDSIZE,
"Must have a useful inline-size _somewhere_");
availISize =
aReflowState.ComputedSizeWithPadding(wm).ISize(wm);
}
nsHTMLReflowMetrics kidDesiredSize(aReflowState);
nsHTMLReflowState kidReflowState(aPresContext, aReflowState, aKidFrame,
LogicalSize(wm, availISize,
NS_UNCONSTRAINEDSIZE),
aContainingBlock.width,
aContainingBlock.height);
// Get the border values
const nsMargin& border = aReflowState.mStyleBorder->GetComputedBorder();
bool constrainHeight = (aReflowState.AvailableHeight() != NS_UNCONSTRAINEDSIZE)
&& aConstrainHeight
// Don't split if told not to (e.g. for fixed frames)
&& (aDelegatingFrame->GetType() != nsGkAtoms::inlineFrame)
//XXX we don't handle splitting frames for inline absolute containing blocks yet
&& (aKidFrame->GetRect().y <= aReflowState.AvailableHeight());
// Don't split things below the fold. (Ideally we shouldn't *have*
// anything totally below the fold, but we can't position frames
// across next-in-flow breaks yet.
if (constrainHeight) {
kidReflowState.AvailableHeight() = aReflowState.AvailableHeight() - border.top
- kidReflowState.ComputedPhysicalMargin().top;
if (NS_AUTOOFFSET != kidReflowState.ComputedPhysicalOffsets().top)
kidReflowState.AvailableHeight() -= kidReflowState.ComputedPhysicalOffsets().top;
}
// Do the reflow
aKidFrame->Reflow(aPresContext, kidDesiredSize, kidReflowState, aStatus);
// If we're solving for 'left' or 'top', then compute it now that we know the
// width/height
if ((NS_AUTOOFFSET == kidReflowState.ComputedPhysicalOffsets().left) ||
(NS_AUTOOFFSET == kidReflowState.ComputedPhysicalOffsets().top)) {
nscoord aContainingBlockWidth = aContainingBlock.width;
nscoord aContainingBlockHeight = aContainingBlock.height;
if (-1 == aContainingBlockWidth) {
// Get the containing block width/height
kidReflowState.ComputeContainingBlockRectangle(aPresContext,
&aReflowState,
aContainingBlockWidth,
aContainingBlockHeight);
}
if (NS_AUTOOFFSET == kidReflowState.ComputedPhysicalOffsets().left) {
NS_ASSERTION(NS_AUTOOFFSET != kidReflowState.ComputedPhysicalOffsets().right,
"Can't solve for both left and right");
kidReflowState.ComputedPhysicalOffsets().left = aContainingBlockWidth -
kidReflowState.ComputedPhysicalOffsets().right -
kidReflowState.ComputedPhysicalMargin().right -
kidDesiredSize.Width() -
kidReflowState.ComputedPhysicalMargin().left;
}
if (NS_AUTOOFFSET == kidReflowState.ComputedPhysicalOffsets().top) {
kidReflowState.ComputedPhysicalOffsets().top = aContainingBlockHeight -
kidReflowState.ComputedPhysicalOffsets().bottom -
kidReflowState.ComputedPhysicalMargin().bottom -
kidDesiredSize.Height() -
kidReflowState.ComputedPhysicalMargin().top;
}
}
// Position the child relative to our padding edge
nsRect rect(border.left + kidReflowState.ComputedPhysicalOffsets().left + kidReflowState.ComputedPhysicalMargin().left,
border.top + kidReflowState.ComputedPhysicalOffsets().top + kidReflowState.ComputedPhysicalMargin().top,
kidDesiredSize.Width(), kidDesiredSize.Height());
// Offset the frame rect by the given origin of the absolute containing block.
// If the frame is auto-positioned on both sides of an axis, it will be
// positioned based on its containing block and we don't need to offset.
if (aContainingBlock.TopLeft() != nsPoint(0, 0)) {
if (!(kidReflowState.mStylePosition->mOffset.GetLeftUnit() == eStyleUnit_Auto &&
kidReflowState.mStylePosition->mOffset.GetRightUnit() == eStyleUnit_Auto)) {
rect.x += aContainingBlock.x;
}
if (!(kidReflowState.mStylePosition->mOffset.GetTopUnit() == eStyleUnit_Auto &&
kidReflowState.mStylePosition->mOffset.GetBottomUnit() == eStyleUnit_Auto)) {
rect.y += aContainingBlock.y;
}
}
aKidFrame->SetRect(rect);
nsView* view = aKidFrame->GetView();
if (view) {
// Size and position the view and set its opacity, visibility, content
// transparency, and clip
nsContainerFrame::SyncFrameViewAfterReflow(aPresContext, aKidFrame, view,
kidDesiredSize.VisualOverflow());
} else {
nsContainerFrame::PositionChildViews(aKidFrame);
}
aKidFrame->DidReflow(aPresContext, &kidReflowState, nsDidReflowStatus::FINISHED);
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent - 1);
printf("abs pos ");
if (aKidFrame) {
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
}
printf("%p rect=%d,%d,%d,%d\n", static_cast<void*>(aKidFrame),
rect.x, rect.y, rect.width, rect.height);
}
#endif
if (aOverflowAreas) {
aOverflowAreas->UnionWith(kidDesiredSize.mOverflowAreas + rect.TopLeft());
}
}
void
nsMathMLmfencedFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
MarkInReflow();
mPresentationData.flags &= ~NS_MATHML_ERROR;
aDesiredSize.ClearSize();
aDesiredSize.SetBlockStartAscent(0);
aDesiredSize.mBoundingMetrics = nsBoundingMetrics();
int32_t i;
const nsStyleFont* font = StyleFont();
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
RefPtr<nsFontMetrics> fm;
nsLayoutUtils::GetFontMetricsForFrame(this, getter_AddRefs(fm),
fontSizeInflation);
nscoord axisHeight, em;
GetAxisHeight(*aReflowState.rendContext, fm, axisHeight);
GetEmHeight(fm, em);
// leading to be left at the top and the bottom of stretched chars
nscoord leading = NSToCoordRound(0.2f * em);
/////////////
// Reflow children
// Asking each child to cache its bounding metrics
// Note that we don't use the base method nsMathMLContainerFrame::Reflow()
// because we want to stretch our fences, separators and stretchy frames using
// the *same* initial aDesiredSize.mBoundingMetrics. If we were to use the base
// method here, our stretchy frames will be stretched and placed, and we may
// end up stretching our fences/separators with a different aDesiredSize.
// XXX The above decision was revisited in bug 121748 and this code can be
// refactored to use nsMathMLContainerFrame::Reflow() at some stage.
nsReflowStatus childStatus;
nsIFrame* firstChild = GetFirstPrincipalChild();
nsIFrame* childFrame = firstChild;
nscoord ascent = 0, descent = 0;
if (firstChild || mOpenChar || mCloseChar || mSeparatorsCount > 0) {
// We use the ASCII metrics to get our minimum height. This way,
// if we have borders or a background, they will fit better with
// other elements on the line.
ascent = fm->MaxAscent();
descent = fm->MaxDescent();
}
while (childFrame) {
nsHTMLReflowMetrics childDesiredSize(aReflowState,
aDesiredSize.mFlags
| NS_REFLOW_CALC_BOUNDING_METRICS);
WritingMode wm = childFrame->GetWritingMode();
LogicalSize availSize = aReflowState.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
nsHTMLReflowState childReflowState(aPresContext, aReflowState,
childFrame, availSize);
ReflowChild(childFrame, aPresContext, childDesiredSize,
childReflowState, childStatus);
//NS_ASSERTION(NS_FRAME_IS_COMPLETE(childStatus), "bad status");
SaveReflowAndBoundingMetricsFor(childFrame, childDesiredSize,
childDesiredSize.mBoundingMetrics);
mozilla::WritingMode outerWM = aReflowState.GetWritingMode();
nscoord childDescent = childDesiredSize.BSize(outerWM) -
childDesiredSize.BlockStartAscent();
if (descent < childDescent)
descent = childDescent;
if (ascent < childDesiredSize.BlockStartAscent())
ascent = childDesiredSize.BlockStartAscent();
childFrame = childFrame->GetNextSibling();
}
/////////////
// Ask stretchy children to stretch themselves
nsBoundingMetrics containerSize;
nsStretchDirection stretchDir = NS_STRETCH_DIRECTION_VERTICAL;
GetPreferredStretchSize(*aReflowState.rendContext,
0, /* i.e., without embellishments */
stretchDir, containerSize);
childFrame = firstChild;
while (childFrame) {
nsIMathMLFrame* mathmlChild = do_QueryFrame(childFrame);
if (mathmlChild) {
nsHTMLReflowMetrics childDesiredSize(aReflowState);
// retrieve the metrics that was stored at the previous pass
GetReflowAndBoundingMetricsFor(childFrame, childDesiredSize,
childDesiredSize.mBoundingMetrics);
mathmlChild->Stretch(*aReflowState.rendContext,
stretchDir, containerSize, childDesiredSize);
// store the updated metrics
SaveReflowAndBoundingMetricsFor(childFrame, childDesiredSize,
childDesiredSize.mBoundingMetrics);
nscoord childDescent = childDesiredSize.Height() - childDesiredSize.BlockStartAscent();
if (descent < childDescent)
descent = childDescent;
if (ascent < childDesiredSize.BlockStartAscent())
ascent = childDesiredSize.BlockStartAscent();
}
childFrame = childFrame->GetNextSibling();
}
// bug 121748: for surrounding fences & separators, use a size that covers everything
GetPreferredStretchSize(*aReflowState.rendContext,
STRETCH_CONSIDER_EMBELLISHMENTS,
stretchDir, containerSize);
bool isRTL = StyleVisibility()->mDirection;
// To achieve a minimum size of "1", the container should be enlarged by the
// unstretched metrics of the fences and separators.
ApplyUnstretchedMetrics(aPresContext, *aReflowState.rendContext,
fontSizeInflation, mOpenChar,
containerSize, isRTL);
for (i = 0; i < mSeparatorsCount; i++) {
ApplyUnstretchedMetrics(aPresContext, *aReflowState.rendContext,
fontSizeInflation, &mSeparatorsChar[i],
containerSize, isRTL);
}
ApplyUnstretchedMetrics(aPresContext, *aReflowState.rendContext,
fontSizeInflation, mCloseChar,
containerSize, isRTL);
//////////////////////////////////////////
// Prepare the opening fence, separators, and closing fence, and
// adjust the origin of children.
// we need to center around the axis
nscoord delta = std::max(containerSize.ascent - axisHeight,
containerSize.descent + axisHeight);
containerSize.ascent = delta + axisHeight;
containerSize.descent = delta - axisHeight;
/////////////////
// opening fence ...
ReflowChar(aPresContext, *aReflowState.rendContext, *fm,
fontSizeInflation, mOpenChar,
NS_MATHML_OPERATOR_FORM_PREFIX, font->mScriptLevel,
axisHeight, leading, em, containerSize, ascent, descent, isRTL);
/////////////////
// separators ...
for (i = 0; i < mSeparatorsCount; i++) {
ReflowChar(aPresContext, *aReflowState.rendContext, *fm,
fontSizeInflation, &mSeparatorsChar[i],
NS_MATHML_OPERATOR_FORM_INFIX, font->mScriptLevel,
axisHeight, leading, em, containerSize, ascent, descent, isRTL);
}
/////////////////
// closing fence ...
ReflowChar(aPresContext, *aReflowState.rendContext, *fm,
fontSizeInflation, mCloseChar,
NS_MATHML_OPERATOR_FORM_POSTFIX, font->mScriptLevel,
axisHeight, leading, em, containerSize, ascent, descent, isRTL);
//////////////////
// Adjust the origins of each child.
// and update our bounding metrics
i = 0;
nscoord dx = 0;
nsBoundingMetrics bm;
bool firstTime = true;
nsMathMLChar *leftChar, *rightChar;
if (isRTL) {
leftChar = mCloseChar;
rightChar = mOpenChar;
} else {
leftChar = mOpenChar;
rightChar = mCloseChar;
}
if (leftChar) {
PlaceChar(leftChar, ascent, bm, dx);
aDesiredSize.mBoundingMetrics = bm;
firstTime = false;
}
if (isRTL) {
childFrame = this->GetLastChild(nsIFrame::kPrincipalList);
} else {
childFrame = firstChild;
}
while (childFrame) {
nsHTMLReflowMetrics childSize(aReflowState);
GetReflowAndBoundingMetricsFor(childFrame, childSize, bm);
if (firstTime) {
firstTime = false;
aDesiredSize.mBoundingMetrics = bm;
}
else
aDesiredSize.mBoundingMetrics += bm;
FinishReflowChild(childFrame, aPresContext, childSize, nullptr,
dx, ascent - childSize.BlockStartAscent(), 0);
dx += childSize.Width();
if (i < mSeparatorsCount) {
PlaceChar(&mSeparatorsChar[isRTL ? mSeparatorsCount - 1 - i : i],
ascent, bm, dx);
aDesiredSize.mBoundingMetrics += bm;
}
i++;
if (isRTL) {
childFrame = childFrame->GetPrevSibling();
} else {
childFrame = childFrame->GetNextSibling();
}
}
if (rightChar) {
PlaceChar(rightChar, ascent, bm, dx);
if (firstTime)
aDesiredSize.mBoundingMetrics = bm;
else
aDesiredSize.mBoundingMetrics += bm;
}
aDesiredSize.Width() = aDesiredSize.mBoundingMetrics.width;
aDesiredSize.Height() = ascent + descent;
aDesiredSize.SetBlockStartAscent(ascent);
SetBoundingMetrics(aDesiredSize.mBoundingMetrics);
SetReference(nsPoint(0, aDesiredSize.BlockStartAscent()));
// see if we should fix the spacing
FixInterFrameSpacing(aDesiredSize);
// Finished with these:
ClearSavedChildMetrics();
// Set our overflow area
GatherAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
}
void
nsAbsoluteContainingBlock::ReflowAbsoluteFrame(nsIFrame* aDelegatingFrame,
nsPresContext* aPresContext,
const nsHTMLReflowState& aReflowState,
const nsRect& aContainingBlock,
AbsPosReflowFlags aFlags,
nsIFrame* aKidFrame,
nsReflowStatus& aStatus,
nsOverflowAreas* aOverflowAreas)
{
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent);
printf("abs pos ");
if (aKidFrame) {
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
}
char width[16];
char height[16];
PrettyUC(aReflowState.AvailableWidth(), width, 16);
PrettyUC(aReflowState.AvailableHeight(), height, 16);
printf(" a=%s,%s ", width, height);
PrettyUC(aReflowState.ComputedWidth(), width, 16);
PrettyUC(aReflowState.ComputedHeight(), height, 16);
printf("c=%s,%s \n", width, height);
}
AutoNoisyIndenter indent(nsBlockFrame::gNoisy);
#endif // DEBUG
WritingMode wm = aKidFrame->GetWritingMode();
LogicalSize logicalCBSize(wm, aContainingBlock.Size());
nscoord availISize = logicalCBSize.ISize(wm);
if (availISize == -1) {
NS_ASSERTION(aReflowState.ComputedSize(wm).ISize(wm) !=
NS_UNCONSTRAINEDSIZE,
"Must have a useful inline-size _somewhere_");
availISize =
aReflowState.ComputedSizeWithPadding(wm).ISize(wm);
}
uint32_t rsFlags = 0;
if (aFlags & AbsPosReflowFlags::eIsGridContainerCB) {
// When a grid container generates the abs.pos. CB for a *child* then
// the static-position is the CB origin (i.e. of the grid area rect).
// https://drafts.csswg.org/css-grid/#static-position
nsIFrame* placeholder =
aPresContext->PresShell()->GetPlaceholderFrameFor(aKidFrame);
if (placeholder && placeholder->GetParent() == aDelegatingFrame) {
rsFlags |= nsHTMLReflowState::STATIC_POS_IS_CB_ORIGIN;
}
}
nsHTMLReflowState kidReflowState(aPresContext, aReflowState, aKidFrame,
LogicalSize(wm, availISize,
NS_UNCONSTRAINEDSIZE),
&logicalCBSize, rsFlags);
// Get the border values
WritingMode outerWM = aReflowState.GetWritingMode();
const LogicalMargin border(outerWM,
aReflowState.mStyleBorder->GetComputedBorder());
const LogicalMargin margin =
kidReflowState.ComputedLogicalMargin().ConvertTo(outerWM, wm);
bool constrainBSize = (aReflowState.AvailableBSize() != NS_UNCONSTRAINEDSIZE)
&& (aFlags & AbsPosReflowFlags::eConstrainHeight)
// Don't split if told not to (e.g. for fixed frames)
&& (aDelegatingFrame->GetType() != nsGkAtoms::inlineFrame)
//XXX we don't handle splitting frames for inline absolute containing blocks yet
&& (aKidFrame->GetLogicalRect(aContainingBlock.Size()).BStart(wm) <=
aReflowState.AvailableBSize());
// Don't split things below the fold. (Ideally we shouldn't *have*
// anything totally below the fold, but we can't position frames
// across next-in-flow breaks yet.
if (constrainBSize) {
kidReflowState.AvailableBSize() =
aReflowState.AvailableBSize() - border.ConvertTo(wm, outerWM).BStart(wm) -
kidReflowState.ComputedLogicalMargin().BStart(wm);
if (NS_AUTOOFFSET != kidReflowState.ComputedLogicalOffsets().BStart(wm)) {
kidReflowState.AvailableBSize() -=
kidReflowState.ComputedLogicalOffsets().BStart(wm);
}
}
// Do the reflow
nsHTMLReflowMetrics kidDesiredSize(kidReflowState);
aKidFrame->Reflow(aPresContext, kidDesiredSize, kidReflowState, aStatus);
const LogicalSize kidSize = kidDesiredSize.Size(wm).ConvertTo(outerWM, wm);
LogicalMargin offsets =
kidReflowState.ComputedLogicalOffsets().ConvertTo(outerWM, wm);
// If we're solving for start in either inline or block direction,
// then compute it now that we know the dimensions.
if ((NS_AUTOOFFSET == offsets.IStart(outerWM)) ||
(NS_AUTOOFFSET == offsets.BStart(outerWM))) {
if (-1 == logicalCBSize.ISize(wm)) {
// Get the containing block width/height
logicalCBSize =
kidReflowState.ComputeContainingBlockRectangle(aPresContext,
&aReflowState);
}
if (NS_AUTOOFFSET == offsets.IStart(outerWM)) {
NS_ASSERTION(NS_AUTOOFFSET != offsets.IEnd(outerWM),
"Can't solve for both start and end");
offsets.IStart(outerWM) =
logicalCBSize.ConvertTo(outerWM, wm).ISize(outerWM) -
offsets.IEnd(outerWM) - margin.IStartEnd(outerWM) -
kidSize.ISize(outerWM);
}
if (NS_AUTOOFFSET == offsets.BStart(outerWM)) {
offsets.BStart(outerWM) =
logicalCBSize.ConvertTo(outerWM, wm).BSize(outerWM) -
offsets.BEnd(outerWM) - margin.BStartEnd(outerWM) -
kidSize.BSize(outerWM);
}
kidReflowState.SetComputedLogicalOffsets(offsets.ConvertTo(wm, outerWM));
}
// Position the child relative to our padding edge
LogicalRect rect(outerWM,
border.IStart(outerWM) + offsets.IStart(outerWM) +
margin.IStart(outerWM),
border.BStart(outerWM) + offsets.BStart(outerWM) +
margin.BStart(outerWM),
kidSize.ISize(outerWM), kidSize.BSize(outerWM));
nsRect r =
rect.GetPhysicalRect(outerWM, logicalCBSize.GetPhysicalSize(wm) +
border.Size(outerWM).GetPhysicalSize(outerWM));
// Offset the frame rect by the given origin of the absolute containing block.
// If the frame is auto-positioned on both sides of an axis, it will be
// positioned based on its containing block and we don't need to offset
// (unless the caller demands it (the STATIC_POS_IS_CB_ORIGIN case)).
if (aContainingBlock.TopLeft() != nsPoint(0, 0)) {
const nsStyleSides& offsets = kidReflowState.mStylePosition->mOffset;
if (!(offsets.GetLeftUnit() == eStyleUnit_Auto &&
offsets.GetRightUnit() == eStyleUnit_Auto) ||
(rsFlags & nsHTMLReflowState::STATIC_POS_IS_CB_ORIGIN)) {
r.x += aContainingBlock.x;
}
if (!(offsets.GetTopUnit() == eStyleUnit_Auto &&
offsets.GetBottomUnit() == eStyleUnit_Auto) ||
(rsFlags & nsHTMLReflowState::STATIC_POS_IS_CB_ORIGIN)) {
r.y += aContainingBlock.y;
}
}
aKidFrame->SetRect(r);
nsView* view = aKidFrame->GetView();
if (view) {
// Size and position the view and set its opacity, visibility, content
// transparency, and clip
nsContainerFrame::SyncFrameViewAfterReflow(aPresContext, aKidFrame, view,
kidDesiredSize.VisualOverflow());
} else {
nsContainerFrame::PositionChildViews(aKidFrame);
}
aKidFrame->DidReflow(aPresContext, &kidReflowState,
nsDidReflowStatus::FINISHED);
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent - 1);
printf("abs pos ");
if (aKidFrame) {
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
}
printf("%p rect=%d,%d,%d,%d\n", static_cast<void*>(aKidFrame),
r.x, r.y, r.width, r.height);
}
#endif
if (aOverflowAreas) {
aOverflowAreas->UnionWith(kidDesiredSize.mOverflowAreas + r.TopLeft());
}
}
void
nsTableOuterFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aOuterRS,
nsReflowStatus& aStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsTableOuterFrame");
DISPLAY_REFLOW(aPresContext, this, aOuterRS, aDesiredSize, aStatus);
uint8_t captionSide = GetCaptionSide();
// Initialize out parameters
aDesiredSize.ClearSize();
aStatus = NS_FRAME_COMPLETE;
if (!(GetStateBits() & NS_FRAME_FIRST_REFLOW)) {
// Set up our kids. They're already present, on an overflow list,
// or there are none so we'll create them now
MoveOverflowToChildList();
}
// Use longs to get more-aligned space.
#define LONGS_IN_HTMLRS \
((sizeof(nsHTMLReflowState) + sizeof(long) - 1) / sizeof(long))
long captionRSSpace[LONGS_IN_HTMLRS];
nsHTMLReflowState *captionRS =
static_cast<nsHTMLReflowState*>((void*)captionRSSpace);
long innerRSSpace[LONGS_IN_HTMLRS];
nsHTMLReflowState *innerRS =
static_cast<nsHTMLReflowState*>((void*) innerRSSpace);
nsRect origInnerRect = InnerTableFrame()->GetRect();
nsRect origInnerVisualOverflow = InnerTableFrame()->GetVisualOverflowRect();
bool innerFirstReflow =
(InnerTableFrame()->GetStateBits() & NS_FRAME_FIRST_REFLOW) != 0;
nsRect origCaptionRect;
nsRect origCaptionVisualOverflow;
bool captionFirstReflow;
if (mCaptionFrames.NotEmpty()) {
origCaptionRect = mCaptionFrames.FirstChild()->GetRect();
origCaptionVisualOverflow =
mCaptionFrames.FirstChild()->GetVisualOverflowRect();
captionFirstReflow =
(mCaptionFrames.FirstChild()->GetStateBits() & NS_FRAME_FIRST_REFLOW) != 0;
}
// ComputeAutoSize has to match this logic.
WritingMode wm;
if (captionSide == NO_SIDE) {
// We don't have a caption.
wm = InnerTableFrame()->GetWritingMode();
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRS,
innerRSSpace, aOuterRS.ComputedSize(wm).ISize(wm));
} else if (captionSide == NS_STYLE_CAPTION_SIDE_LEFT ||
captionSide == NS_STYLE_CAPTION_SIDE_RIGHT) {
// nsTableCaptionFrame::ComputeAutoSize takes care of making side
// captions small. Compute the caption's size first, and tell the
// table to fit in what's left.
wm = mCaptionFrames.FirstChild()->GetWritingMode();
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRS,
captionRSSpace, aOuterRS.ComputedSize(wm).ISize(wm));
nscoord innerAvailISize = aOuterRS.ComputedSize(wm).ISize(wm) -
captionRS->ComputedSizeWithMarginBorderPadding(wm).ISize(wm);
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRS,
innerRSSpace, innerAvailISize);
} else if (captionSide == NS_STYLE_CAPTION_SIDE_TOP ||
captionSide == NS_STYLE_CAPTION_SIDE_BOTTOM) {
// Compute the table's size first, and then prevent the caption from
// being wider unless it has to be.
//
// Note that CSS 2.1 (but not 2.0) says:
// The width of the anonymous box is the border-edge width of the
// table box inside it
// We don't actually make our anonymous box that width (if we did,
// it would break 'auto' margins), but this effectively does that.
wm = InnerTableFrame()->GetWritingMode();
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRS,
innerRSSpace, aOuterRS.ComputedSize(wm).ISize(wm));
// It's good that CSS 2.1 says not to include margins, since we
// can't, since they already been converted so they exactly
// fill the available width (ignoring the margin on one side if
// neither are auto). (We take advantage of that later when we call
// GetCaptionOrigin, though.)
nscoord innerBorderWidth =
innerRS->ComputedSizeWithBorderPadding(wm).ISize(wm);
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRS,
captionRSSpace, innerBorderWidth);
} else {
NS_ASSERTION(captionSide == NS_STYLE_CAPTION_SIDE_TOP_OUTSIDE ||
captionSide == NS_STYLE_CAPTION_SIDE_BOTTOM_OUTSIDE,
"unexpected caption-side");
// Size the table and the caption independently.
wm = mCaptionFrames.FirstChild()->GetWritingMode();
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRS,
captionRSSpace, aOuterRS.ComputedSize(wm).ISize(wm));
wm = InnerTableFrame()->GetWritingMode();
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRS,
innerRSSpace, aOuterRS.ComputedSize(wm).ISize(wm));
}
// First reflow the caption.
nsHTMLReflowMetrics captionMet(captionRS->GetWritingMode());
nsSize captionSize;
nsMargin captionMargin;
if (mCaptionFrames.NotEmpty()) {
nsReflowStatus capStatus; // don't let the caption cause incomplete
OuterDoReflowChild(aPresContext, mCaptionFrames.FirstChild(),
*captionRS, captionMet, capStatus);
captionSize.width = captionMet.Width();
captionSize.height = captionMet.Height();
captionMargin = captionRS->ComputedPhysicalMargin();
// Now that we know the height of the caption, reduce the available height
// for the table frame if we are height constrained and the caption is above
// or below the inner table.
if (NS_UNCONSTRAINEDSIZE != aOuterRS.AvailableHeight()) {
nscoord captionHeight = 0;
switch (captionSide) {
case NS_STYLE_CAPTION_SIDE_TOP:
case NS_STYLE_CAPTION_SIDE_BOTTOM:
case NS_STYLE_CAPTION_SIDE_TOP_OUTSIDE:
case NS_STYLE_CAPTION_SIDE_BOTTOM_OUTSIDE: {
captionHeight = captionSize.height + captionMargin.TopBottom();
break;
}
}
innerRS->AvailableHeight() =
std::max(0, innerRS->AvailableHeight() - captionHeight);
}
} else {
captionSize.SizeTo(0,0);
captionMargin.SizeTo(0,0,0,0);
}
// Then, now that we know how much to reduce the width of the inner
// table to account for side captions, reflow the inner table.
nsHTMLReflowMetrics innerMet(innerRS->GetWritingMode());
OuterDoReflowChild(aPresContext, InnerTableFrame(), *innerRS,
innerMet, aStatus);
nsSize innerSize;
innerSize.width = innerMet.Width();
innerSize.height = innerMet.Height();
nsMargin innerMargin = innerRS->ComputedPhysicalMargin();
nsSize containSize = GetContainingBlockSize(aOuterRS);
// Now that we've reflowed both we can place them.
// XXXldb Most of the input variables here are now uninitialized!
// XXX Need to recompute inner table's auto margins for the case of side
// captions. (Caption's are broken too, but that should be fixed earlier.)
if (mCaptionFrames.NotEmpty()) {
nsPoint captionOrigin;
GetCaptionOrigin(captionSide, containSize, innerSize,
innerMargin, captionSize, captionMargin, captionOrigin);
FinishReflowChild(mCaptionFrames.FirstChild(), aPresContext, captionMet,
captionRS, captionOrigin.x, captionOrigin.y, 0);
captionRS->~nsHTMLReflowState();
}
// XXX If the height is constrained then we need to check whether
// everything still fits...
nsPoint innerOrigin;
GetInnerOrigin(captionSide, containSize, captionSize,
captionMargin, innerSize, innerMargin, innerOrigin);
FinishReflowChild(InnerTableFrame(), aPresContext, innerMet, innerRS,
innerOrigin.x, innerOrigin.y, 0);
innerRS->~nsHTMLReflowState();
nsTableFrame::InvalidateTableFrame(InnerTableFrame(), origInnerRect,
origInnerVisualOverflow, innerFirstReflow);
if (mCaptionFrames.NotEmpty()) {
nsTableFrame::InvalidateTableFrame(mCaptionFrames.FirstChild(), origCaptionRect,
origCaptionVisualOverflow,
captionFirstReflow);
}
UpdateReflowMetrics(captionSide, aDesiredSize, innerMargin, captionMargin);
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aOuterRS,
aDesiredSize.mOverflowAreas, 0,
aStatus);
}
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aOuterRS, aStatus);
// Return our desired rect
NS_FRAME_SET_TRUNCATION(aStatus, aOuterRS, aDesiredSize);
}
