Ejemplo n.º 1
0
void PropertyView::slotChangePropertyEditor(const App::Property& prop)
{
    App::PropertyContainer* parent = prop.getContainer();
    if (parent && parent->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
        propertyEditorData->updatetEditorMode(prop);
    }
    else if (parent && parent->isDerivedFrom(Gui::ViewProvider::getClassTypeId())) {
        propertyEditorView->updatetEditorMode(prop);
    }
}
Ejemplo n.º 2
0
void PropertyView::slotRemoveDynamicProperty(const App::Property& prop)
{
    App::PropertyContainer* parent = prop.getContainer();
    if (parent && parent->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
        propertyEditorData->removeProperty(prop);
    }
    else if (parent && parent->isDerivedFrom(Gui::ViewProvider::getClassTypeId())) {
        propertyEditorView->removeProperty(prop);
    }
}
Ejemplo n.º 3
0
void PropertyView::slotAppendDynamicProperty(const App::Property& prop)
{
    App::PropertyContainer* parent = prop.getContainer();
    if (parent->isHidden(&prop) || prop.testStatus(App::Property::Hidden))
        return;

    if (parent && parent->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
        propertyEditorData->appendProperty(prop);
    }
    else if (parent && parent->isDerivedFrom(Gui::ViewProvider::getClassTypeId())) {
        propertyEditorView->appendProperty(prop);
    }
}
void PropertyPartShape::SaveDocFile (Base::Writer &writer) const
{
    // If the shape is empty we simply store nothing. The file size will be 0 which
    // can be checked when reading in the data.
    if (_Shape._Shape.IsNull())
        return;
    // NOTE: Cleaning the triangulation may cause problems on some algorithms like BOP
    // Before writing to the project we clean all triangulation data to save memory
    BRepBuilderAPI_Copy copy(_Shape._Shape);
    const TopoDS_Shape& myShape = copy.Shape();
    BRepTools::Clean(myShape); // remove triangulation

    // create a temporary file and copy the content to the zip stream
    // once the tmp. filename is known use always the same because otherwise
    // we may run into some problems on the Linux platform
    static Base::FileInfo fi(Base::FileInfo::getTempFileName());

    if (!BRepTools::Write(myShape,(const Standard_CString)fi.filePath().c_str())) {
        // Note: Do NOT throw an exception here because if the tmp. file could
        // not be created we should not abort.
        // We only print an error message but continue writing the next files to the
        // stream...
        App::PropertyContainer* father = this->getContainer();
        if (father && father->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
            App::DocumentObject* obj = static_cast<App::DocumentObject*>(father);
            Base::Console().Error("Shape of '%s' cannot be written to BRep file '%s'\n", 
                obj->Label.getValue(),fi.filePath().c_str());
        }
        else {
            Base::Console().Error("Cannot save BRep file '%s'\n", fi.filePath().c_str());
        }
    }

    Base::ifstream file(fi, std::ios::in | std::ios::binary);
    if (file){
        unsigned long ulSize = 0; 
        std::streambuf* buf = file.rdbuf();
        if (buf) {
            unsigned long ulCurr;
            ulCurr = buf->pubseekoff(0, std::ios::cur, std::ios::in);
            ulSize = buf->pubseekoff(0, std::ios::end, std::ios::in);
            buf->pubseekoff(ulCurr, std::ios::beg, std::ios::in);
        }

        // read in the ASCII file and write back to the stream
        std::strstreambuf sbuf(ulSize);
        file >> &sbuf;
        writer.Stream() << &sbuf;
    }

    file.close();
    // remove temp file
    fi.deleteFile();
}
void PropertyPartShape::RestoreDocFile(Base::Reader &reader)
{
    Base::FileInfo brep(reader.getFileName());
    if (brep.hasExtension("bin")) {
        TopoShape shape;
        shape.importBinary(reader);
        setValue(shape);
    }
    else {
        bool direct = App::GetApplication().GetParameterGroupByPath
            ("User parameter:BaseApp/Preferences/Mod/Part/General")->GetBool("DirectAccess", true);
        if (!direct) {
            BRep_Builder builder;
            // create a temporary file and copy the content from the zip stream
            Base::FileInfo fi(App::Application::getTempFileName());

            // read in the ASCII file and write back to the file stream
            Base::ofstream file(fi, std::ios::out | std::ios::binary);
            unsigned long ulSize = 0; 
            if (reader) {
                std::streambuf* buf = file.rdbuf();
                reader >> buf;
                file.flush();
                ulSize = buf->pubseekoff(0, std::ios::cur, std::ios::in);
            }
            file.close();

            // Read the shape from the temp file, if the file is empty the stored shape was already empty.
            // If it's still empty after reading the (non-empty) file there must occurred an error.
            TopoDS_Shape shape;
            if (ulSize > 0) {
                if (!BRepTools::Read(shape, (Standard_CString)fi.filePath().c_str(), builder)) {
                    // Note: Do NOT throw an exception here because if the tmp. created file could
                    // not be read it's NOT an indication for an invalid input stream 'reader'.
                    // We only print an error message but continue reading the next files from the
                    // stream...
                    App::PropertyContainer* father = this->getContainer();
                    if (father && father->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
                        App::DocumentObject* obj = static_cast<App::DocumentObject*>(father);
                        Base::Console().Error("BRep file '%s' with shape of '%s' seems to be empty\n", 
                            fi.filePath().c_str(),obj->Label.getValue());
                    }
                    else {
                        Base::Console().Warning("Loaded BRep file '%s' seems to be empty\n", fi.filePath().c_str());
                    }
                }
            }

            // delete the temp file
            fi.deleteFile();
            setValue(shape);
        }
        else {
void PropertyPartShape::SaveDocFile (Base::Writer &writer) const
{
    // If the shape is empty we simply store nothing. The file size will be 0 which
    // can be checked when reading in the data.
    if (_Shape.getShape().IsNull())
        return;
    TopoDS_Shape myShape = _Shape.getShape();
    if (writer.getMode("BinaryBrep")) {
        TopoShape shape;
        shape.setShape(myShape);
        shape.exportBinary(writer.Stream());
    }
    else {
        bool direct = App::GetApplication().GetParameterGroupByPath
            ("User parameter:BaseApp/Preferences/Mod/Part/General")->GetBool("DirectAccess", true);
        if (!direct) {
            // create a temporary file and copy the content to the zip stream
            // once the tmp. filename is known use always the same because otherwise
            // we may run into some problems on the Linux platform
            static Base::FileInfo fi(App::Application::getTempFileName());

            if (!BRepTools_Write(myShape,(Standard_CString)fi.filePath().c_str())) {
                // Note: Do NOT throw an exception here because if the tmp. file could
                // not be created we should not abort.
                // We only print an error message but continue writing the next files to the
                // stream...
                App::PropertyContainer* father = this->getContainer();
                if (father && father->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
                    App::DocumentObject* obj = static_cast<App::DocumentObject*>(father);
                    Base::Console().Error("Shape of '%s' cannot be written to BRep file '%s'\n", 
                        obj->Label.getValue(),fi.filePath().c_str());
                }
                else {
                    Base::Console().Error("Cannot save BRep file '%s'\n", fi.filePath().c_str());
                }

                std::stringstream ss;
                ss << "Cannot save BRep file '" << fi.filePath() << "'";
                writer.addError(ss.str());
            }

            Base::ifstream file(fi, std::ios::in | std::ios::binary);
            if (file) {
                //unsigned long ulSize = 0; 
                std::streambuf* buf = file.rdbuf();
                //if (buf) {
                //    unsigned long ulCurr;
                //    ulCurr = buf->pubseekoff(0, std::ios::cur, std::ios::in);
                //    ulSize = buf->pubseekoff(0, std::ios::end, std::ios::in);
                //    buf->pubseekoff(ulCurr, std::ios::beg, std::ios::in);
                //}

                // read in the ASCII file and write back to the stream
                //std::strstreambuf sbuf(ulSize);
                //file >> &sbuf;
                //writer.Stream() << &sbuf;
                writer.Stream() << buf;
            }

            file.close();
            // remove temp file
            fi.deleteFile();
        }
        else {
            BRepTools_Write(myShape, writer.Stream());
        }
    }
}