Py::Object ParameterGrpPy::setUnsigned(const Py::Tuple& args)
{
char *pstr;
unsigned int UInt;
if (!PyArg_ParseTuple(args.ptr(), "sI", &pstr,&UInt))
throw Py::Exception();
_cParamGrp->SetUnsigned(pstr,UInt);
return Py::None();
}
Py::Object ParameterGrpPy::setBool(const Py::Tuple& args)
{
char *pstr;
int Bool;
if (!PyArg_ParseTuple(args.ptr(), "si", &pstr,&Bool))
throw Py::Exception();
_cParamGrp->SetBool(pstr,Bool!=0);
return Py::None();
}
Py::Object ParameterGrpPy::setInt(const Py::Tuple& args)
{
char *pstr;
int Int;
if (!PyArg_ParseTuple(args.ptr(), "si", &pstr,&Int))
throw Py::Exception();
_cParamGrp->SetInt(pstr,Int);
return Py::None();
}
PyObject *ParameterGrpPy::PyNotify(PyObject *args)
{
char *pstr;
if (!PyArg_ParseTuple(args, "s", &pstr)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
_cParamGrp->Notify(pstr);
Py_Return;
}PY_CATCH;
}
PyObject *ParameterGrpPy::PyNotifyAll(PyObject *args)
{
if (!PyArg_ParseTuple(args, "")) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
_cParamGrp->NotifyAll();
Py_Return;
}PY_CATCH;
}
PyObject *ParameterGrpPy::PyGetString(PyObject *args)
{
char *pstr;
char * str="";
if (!PyArg_ParseTuple(args, "s|s", &pstr,&str)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
return Py_BuildValue("s",_cParamGrp->GetASCII(pstr,str).c_str());
}PY_CATCH;
}
PyObject *ParameterGrpPy::PyGetFloat(PyObject *args)
{
char *pstr;
double Float=0.0;
if (!PyArg_ParseTuple(args, "s|d", &pstr,&Float)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
return Py_BuildValue("d",_cParamGrp->GetFloat(pstr,Float));
}PY_CATCH;
}
PyObject *ParameterGrpPy::PyGetUnsigned(PyObject *args)
{
char *pstr;
unsigned long UInt=0;
if (!PyArg_ParseTuple(args, "s|I", &pstr,&UInt)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
return Py_BuildValue("I",_cParamGrp->GetUnsigned(pstr,UInt));
}PY_CATCH;
}
PyObject *ParameterGrpPy::PyGetInt(PyObject *args)
{
char *pstr;
long Int=0;
if (!PyArg_ParseTuple(args, "s|i", &pstr,&Int)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
return Py_BuildValue("i",_cParamGrp->GetInt(pstr,Int));
}PY_CATCH;
}
Py::Object ParameterGrpPy::setFloat(const Py::Tuple& args)
{
char *pstr;
double Float;
if (!PyArg_ParseTuple(args.ptr(), "sd", &pstr,&Float))
throw Py::Exception();
_cParamGrp->SetFloat(pstr,Float);
return Py::None();
}
PyObject *ParameterGrpPy::PySetString(PyObject *args)
{
char *pstr;
char * str;
if (!PyArg_ParseTuple(args, "ss", &pstr,&str)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
_cParamGrp->SetASCII(pstr,str);
Py_Return;
}PY_CATCH;
}
PyObject *ParameterGrpPy::PySetFloat(PyObject *args)
{
char *pstr;
double Float;
if (!PyArg_ParseTuple(args, "sd", &pstr,&Float)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
_cParamGrp->SetFloat(pstr,Float);
Py_Return;
}PY_CATCH;
}
PyObject *ParameterGrpPy::PySetUnsigned(PyObject *args)
{
char *pstr;
unsigned long UInt;
if (!PyArg_ParseTuple(args, "sI", &pstr,&UInt)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
_cParamGrp->SetUnsigned(pstr,UInt);
Py_Return;
}PY_CATCH;
}
PyObject *ParameterGrpPy::PyGetGrp(PyObject *args)
{
char *pstr;
if (!PyArg_ParseTuple(args, "s", &pstr)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
// get the Handle of the wanted group
Base::Reference<ParameterGrp> handle = _cParamGrp->GetGroup(pstr);
if(handle.isValid()){
// crate a python wrapper class
ParameterGrpPy *pcParamGrp = new ParameterGrpPy(handle);
// increment the reff count
//pcParamGrp->_INCREF();
return pcParamGrp;
}else{
PyErr_SetString(PyExc_IOError, "GetGroup failed");
return 0L;
}
}PY_CATCH;
}
PyObject *ParameterGrpPy::PySetBool(PyObject *args)
{
char *pstr;
int Bool;
if (!PyArg_ParseTuple(args, "si", &pstr,&Bool)) // convert args: Python->C
return NULL; // NULL triggers exception
PY_TRY {
_cParamGrp->SetBool(pstr,Bool!=0);
Py_Return;
}PY_CATCH;
}
DrawViewSpreadsheet::DrawViewSpreadsheet(void)
{
static const char *vgroup = "Spreadsheet";
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/TechDraw/Labels");
std::string fontName = hGrp->GetASCII("LabelFont", "Sans");
ADD_PROPERTY_TYPE(Source ,(0),vgroup,App::Prop_None,"Spreadsheet to view");
ADD_PROPERTY_TYPE(CellStart ,("A1"),vgroup,App::Prop_None,"The top left cell of the range to display");
ADD_PROPERTY_TYPE(CellEnd ,("B2"),vgroup,App::Prop_None,"The bottom right cell of the range to display");
ADD_PROPERTY_TYPE(Font ,((fontName.c_str())),vgroup,App::Prop_None,"The name of the font to use");
ADD_PROPERTY_TYPE(TextColor,(0.0f,0.0f,0.0f),vgroup,App::Prop_None,"The default color of the text and lines");
ADD_PROPERTY_TYPE(TextSize,(12.0),vgroup,App::Prop_None,"The size of the text");
ADD_PROPERTY_TYPE(LineWidth,(0.35),vgroup,App::Prop_None,"The thickness of the cell lines");
//ADD_PROPERTY_TYPE(Symbol,(""),vgroup,App::Prop_Hidden,"The SVG image of this spreadsheet");
EditableTexts.setStatus(App::Property::Hidden,true);
}
QColor QGCustomText::getNormalColor()
{
QColor result;
QGIView *parent;
QGraphicsItem* qparent = parentItem();
if (qparent == nullptr) {
parent = nullptr;
} else {
parent = dynamic_cast<QGIView *> (qparent);
}
if (parent != nullptr) {
result = parent->getNormalColor();
} else {
Base::Reference<ParameterGrp> hGrp = getParmGroup();
App::Color fcColor;
fcColor.setPackedValue(hGrp->GetUnsigned("NormalColor", 0x00000000));
result = fcColor.asValue<QColor>();
}
return result;
}
void DlgImportExportIges::loadSettings()
{
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part")->GetGroup("IGES");
int unit = hGrp->GetInt("Unit", 0);
ui->comboBoxUnits->setCurrentIndex(unit);
int value = Interface_Static::IVal("write.iges.brep.mode");
bool brep = hGrp->GetBool("BrepMode", value > 0);
if (brep)
ui->radioButtonBRepOn->setChecked(true);
else
ui->radioButtonBRepOff->setChecked(true);
// Import
ui->checkSkipBlank->setChecked(hGrp->GetBool("SkipBlankEntities", true));
// header info
ui->lineEditCompany->setText(QString::fromStdString(hGrp->GetASCII("Company",
Interface_Static::CVal("write.iges.header.company"))));
ui->lineEditAuthor->setText(QString::fromStdString(hGrp->GetASCII("Author",
Interface_Static::CVal("write.iges.header.author"))));
//ui->lineEditProduct->setText(QString::fromStdString(hGrp->GetASCII("Product")));
ui->lineEditProduct->setText(QString::fromLatin1(
Interface_Static::CVal("write.iges.header.product")));
}
void DlgImportExportIges::saveSettings()
{
int unit = ui->comboBoxUnits->currentIndex();
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part")->GetGroup("IGES");
hGrp->SetInt("Unit", unit);
switch (unit) {
case 1:
Interface_Static::SetCVal("write.iges.unit","M");
break;
case 2:
Interface_Static::SetCVal("write.iges.unit","IN");
break;
default:
Interface_Static::SetCVal("write.iges.unit","MM");
break;
}
hGrp->SetBool("BrepMode", bg->checkedId() == 1);
Interface_Static::SetIVal("write.iges.brep.mode", bg->checkedId());
// Import
hGrp->SetBool("SkipBlankEntities", ui->checkSkipBlank->isChecked());
// header info
hGrp->SetASCII("Company", ui->lineEditCompany->text().toLatin1());
hGrp->SetASCII("Author", ui->lineEditAuthor->text().toLatin1());
//hGrp->SetASCII("Product", ui->lineEditProduct->text().toLatin1());
Interface_Static::SetCVal("write.iges.header.company", ui->lineEditCompany->text().toLatin1());
Interface_Static::SetCVal("write.iges.header.author", ui->lineEditAuthor->text().toLatin1());
//Interface_Static::SetCVal("write.iges.header.product", ui->lineEditProduct->text().toLatin1());
}
DrawViewAnnotation::DrawViewAnnotation(void)
{
static const char *vgroup = "Annotation";
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/TechDraw/Labels");
std::string fontName = hGrp->GetASCII("LabelFont", "osifont");
ADD_PROPERTY_TYPE(Text ,("Default Text"),vgroup,App::Prop_None,"The text to be displayed");
ADD_PROPERTY_TYPE(Font ,(fontName.c_str()),vgroup,App::Prop_None, "The name of the font to use");
ADD_PROPERTY_TYPE(TextColor,(0.0f,0.0f,0.0f),vgroup,App::Prop_None,"The color of the text");
ADD_PROPERTY_TYPE(TextSize,(8.0),vgroup,App::Prop_None,"The size of the text in units");
ADD_PROPERTY_TYPE(MaxWidth,(-1.0),vgroup,App::Prop_None,"The maximum width of the Annotation block");
ADD_PROPERTY_TYPE(LineSpace,(80),vgroup,App::Prop_None,"Line spacing adjustment. 100 is normal spacing.");
TextStyle.setEnums(TextStyleEnums);
ADD_PROPERTY(TextStyle, ((long)0));
Scale.setStatus(App::Property::Hidden,true);
ScaleType.setStatus(App::Property::Hidden,true);
}
DrawHatch::DrawHatch(void)
{
static const char *vgroup = "Hatch";
ADD_PROPERTY_TYPE(DirProjection ,(0,0,1.0) ,vgroup,App::Prop_None,"Projection direction when Hatch was defined"); //sb RO?
ADD_PROPERTY_TYPE(Source,(0),vgroup,(App::PropertyType)(App::Prop_None),"The View + Face to be hatched");
ADD_PROPERTY_TYPE(HatchPattern ,(""),vgroup,App::Prop_None,"The hatch pattern file for this area");
ADD_PROPERTY_TYPE(HatchColor,(0.0f,0.0f,0.0f),vgroup,App::Prop_None,"The color of the hatch pattern");
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/TechDraw");
std::string defaultDir = App::Application::getResourceDir() + "Mod/Drawing/patterns/";
std::string defaultFileName = defaultDir + "simple.svg";
QString patternFileName = QString::fromStdString(hGrp->GetASCII("PatternFile",defaultFileName.c_str()));
if (patternFileName.isEmpty()) {
patternFileName = QString::fromStdString(defaultFileName);
}
QFileInfo tfi(patternFileName);
if (tfi.isReadable()) {
HatchPattern.setValue(patternFileName.toUtf8().constData());
}
}
QString DownloadItem::getDownloadDirectory() const
{
QString exe = QString::fromLatin1(App::GetApplication().getExecutableName());
#if QT_VERSION >= 0x050000
QString path = QStandardPaths::writableLocation(QStandardPaths::DocumentsLocation);
#else
QString path = QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation);
#endif
QString dirPath = QDir(path).filePath(exe);
Base::Reference<ParameterGrp> hPath = App::GetApplication().GetUserParameter().GetGroup("BaseApp")
->GetGroup("Preferences")->GetGroup("General");
std::string dir = hPath->GetASCII("DownloadPath", "");
if (!dir.empty()) {
dirPath = QString::fromUtf8(dir.c_str());
}
if (QFileInfo(dirPath).exists() || QDir().mkpath(dirPath)) {
return dirPath;
}
else {
return path;
}
}
void DrawViewSection::getParameters()
{
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/TechDraw/Colors");
App::Color cutColor = App::Color((uint32_t) hGrp->GetUnsigned("CutSurfaceColor", 0xC8C8C800));
CutSurfaceColor.setValue(cutColor);
App::Color hatchColor = App::Color((uint32_t) hGrp->GetUnsigned("SectionHatchColor", 0x00000000));
HatchColor.setValue(hatchColor);
hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/TechDraw");
std::string defaultDir = App::Application::getResourceDir() + "Mod/Drawing/patterns/";
std::string defaultFileName = defaultDir + "simple.svg";
QString patternFileName = QString::fromStdString(hGrp->GetASCII("PatternFile",defaultFileName.c_str()));
if (patternFileName.isEmpty()) {
patternFileName = QString::fromStdString(defaultFileName);
}
QFileInfo tfi(patternFileName);
if (tfi.isReadable()) {
HatchPattern.setValue(patternFileName.toUtf8().constData());
}
}
void ParameterGrp::insertTo(Base::Reference<ParameterGrp> Grp)
{
// copy group
std::vector<Base::Reference<ParameterGrp> > Grps = GetGroups();
std::vector<Base::Reference<ParameterGrp> >::iterator It1;
for (It1 = Grps.begin();It1 != Grps.end();++It1)
(*It1)->insertTo(Grp->GetGroup((*It1)->GetGroupName()));
// copy strings
std::vector<std::pair<std::string,std::string> > StringMap = GetASCIIMap();
std::vector<std::pair<std::string,std::string> >::iterator It2;
for (It2 = StringMap.begin();It2 != StringMap.end();++It2)
Grp->SetASCII(It2->first.c_str(),It2->second.c_str());
// copy bool
std::vector<std::pair<std::string,bool> > BoolMap = GetBoolMap();
std::vector<std::pair<std::string,bool> >::iterator It3;
for (It3 = BoolMap.begin();It3 != BoolMap.end();++It3)
Grp->SetBool(It3->first.c_str(),It3->second);
// copy int
std::vector<std::pair<std::string,long> > IntMap = GetIntMap();
std::vector<std::pair<std::string,long> >::iterator It4;
for (It4 = IntMap.begin();It4 != IntMap.end();++It4)
Grp->SetInt(It4->first.c_str(),It4->second);
// copy float
std::vector<std::pair<std::string,double> > FloatMap = GetFloatMap();
std::vector<std::pair<std::string,double> >::iterator It5;
for (It5 = FloatMap.begin();It5 != FloatMap.end();++It5)
Grp->SetFloat(It5->first.c_str(),It5->second);
// copy uint
std::vector<std::pair<std::string,unsigned long> > UIntMap = GetUnsignedMap();
std::vector<std::pair<std::string,unsigned long> >::iterator It6;
for (It6 = UIntMap.begin();It6 != UIntMap.end();++It6)
Grp->SetUnsigned(It6->first.c_str(),It6->second);
}
void PartExport initPart()
{
std::stringstream str;
str << OCC_VERSION_MAJOR << "." << OCC_VERSION_MINOR << "." << OCC_VERSION_MAINTENANCE;
#ifdef OCC_VERSION_DEVELOPMENT
str << "." OCC_VERSION_DEVELOPMENT;
#endif
App::Application::Config()["OCC_VERSION"] = str.str();
Base::Console().Log("Module: Part\n");
// This is highly experimental and we should keep an eye on it
// if we have mysterious crashes
// The argument must be 'Standard_False' to avoid FPE caused by
// Python's cmath module.
#if !defined(_DEBUG)
OSD::SetSignal(Standard_False);
#endif
PyObject* partModule = Py_InitModule3("Part", Part_methods, module_part_doc); /* mod name, table ptr */
Base::Console().Log("Loading Part module... done\n");
PyObject* OCCError = 0;
if (PyObject_IsSubclass(Base::BaseExceptionFreeCADError,
PyExc_RuntimeError)) {
OCCError = PyErr_NewException("Part.OCCError",
Base::BaseExceptionFreeCADError, NULL);
}
else {
Base::Console().Error("Can not inherit Part.OCCError form BaseFreeCADError.\n");
OCCError = PyErr_NewException("Part.OCCError",
PyExc_RuntimeError, NULL);
}
Py_INCREF(OCCError);
PyModule_AddObject(partModule, "OCCError", OCCError);
PartExceptionOCCError = OCCError; //set global variable ;(
PartExceptionOCCDomainError = PyErr_NewException("Part.OCCDomainError",
PartExceptionOCCError, NULL);
Py_INCREF(PartExceptionOCCDomainError);
PyModule_AddObject(partModule, "OCCDomainError",
PartExceptionOCCDomainError);
PartExceptionOCCRangeError = PyErr_NewException("Part.OCCRangeError",
PartExceptionOCCDomainError, NULL);
Py_INCREF(PartExceptionOCCRangeError);
PyModule_AddObject(partModule, "OCCRangeError", PartExceptionOCCRangeError);
PartExceptionOCCConstructionError = PyErr_NewException(
"Part.OCCConstructionError", PartExceptionOCCDomainError, NULL);
Py_INCREF(PartExceptionOCCConstructionError);
PyModule_AddObject(partModule, "OCCConstructionError",
PartExceptionOCCConstructionError);
PartExceptionOCCDimensionError = PyErr_NewException(
"Part.OCCDimensionError", PartExceptionOCCDomainError, NULL);
Py_INCREF(PartExceptionOCCConstructionError);
PyModule_AddObject(partModule, "OCCDimensionError",
PartExceptionOCCDimensionError);
//rename the types properly to pickle and unpickle them
Part::TopoShapePy ::Type.tp_name = "Part.Shape";
Part::TopoShapeVertexPy ::Type.tp_name = "Part.Vertex";
Part::TopoShapeWirePy ::Type.tp_name = "Part.Wire";
Part::TopoShapeEdgePy ::Type.tp_name = "Part.Edge";
Part::TopoShapeSolidPy ::Type.tp_name = "Part.Solid";
Part::TopoShapeFacePy ::Type.tp_name = "Part.Face";
Part::TopoShapeCompoundPy ::Type.tp_name = "Part.Compound";
Part::TopoShapeCompSolidPy::Type.tp_name = "Part.CompSolid";
Part::TopoShapeShellPy ::Type.tp_name = "Part.Shell";
// Add Types to module
Base::Interpreter().addType(&Part::TopoShapePy ::Type,partModule,"Shape");
Base::Interpreter().addType(&Part::TopoShapeVertexPy ::Type,partModule,"Vertex");
Base::Interpreter().addType(&Part::TopoShapeWirePy ::Type,partModule,"Wire");
Base::Interpreter().addType(&Part::TopoShapeEdgePy ::Type,partModule,"Edge");
Base::Interpreter().addType(&Part::TopoShapeSolidPy ::Type,partModule,"Solid");
Base::Interpreter().addType(&Part::TopoShapeFacePy ::Type,partModule,"Face");
Base::Interpreter().addType(&Part::TopoShapeCompoundPy ::Type,partModule,"Compound");
Base::Interpreter().addType(&Part::TopoShapeCompSolidPy ::Type,partModule,"CompSolid");
Base::Interpreter().addType(&Part::TopoShapeShellPy ::Type,partModule,"Shell");
Base::Interpreter().addType(&Part::LinePy ::Type,partModule,"Line");
Base::Interpreter().addType(&Part::PointPy ::Type,partModule,"Point");
Base::Interpreter().addType(&Part::CirclePy ::Type,partModule,"Circle");
Base::Interpreter().addType(&Part::EllipsePy ::Type,partModule,"Ellipse");
Base::Interpreter().addType(&Part::HyperbolaPy ::Type,partModule,"Hyperbola");
Base::Interpreter().addType(&Part::ParabolaPy ::Type,partModule,"Parabola");
Base::Interpreter().addType(&Part::ArcPy ::Type,partModule,"Arc");
Base::Interpreter().addType(&Part::ArcOfCirclePy ::Type,partModule,"ArcOfCircle");
Base::Interpreter().addType(&Part::ArcOfEllipsePy ::Type,partModule,"ArcOfEllipse");
Base::Interpreter().addType(&Part::ArcOfParabolaPy ::Type,partModule,"ArcOfParabola");
Base::Interpreter().addType(&Part::ArcOfHyperbolaPy ::Type,partModule,"ArcOfHyperbola");
Base::Interpreter().addType(&Part::BezierCurvePy ::Type,partModule,"BezierCurve");
Base::Interpreter().addType(&Part::BSplineCurvePy ::Type,partModule,"BSplineCurve");
Base::Interpreter().addType(&Part::OffsetCurvePy ::Type,partModule,"OffsetCurve");
Base::Interpreter().addType(&Part::PlanePy ::Type,partModule,"Plane");
Base::Interpreter().addType(&Part::CylinderPy ::Type,partModule,"Cylinder");
Base::Interpreter().addType(&Part::ConePy ::Type,partModule,"Cone");
Base::Interpreter().addType(&Part::SpherePy ::Type,partModule,"Sphere");
Base::Interpreter().addType(&Part::ToroidPy ::Type,partModule,"Toroid");
Base::Interpreter().addType(&Part::BezierSurfacePy ::Type,partModule,"BezierSurface");
Base::Interpreter().addType(&Part::BSplineSurfacePy ::Type,partModule,"BSplineSurface");
Base::Interpreter().addType(&Part::OffsetSurfacePy ::Type,partModule,"OffsetSurface");
Base::Interpreter().addType(&Part::SurfaceOfExtrusionPy ::Type,partModule,"SurfaceOfExtrusion");
Base::Interpreter().addType(&Part::SurfaceOfRevolutionPy::Type,partModule,"SurfaceOfRevolution");
Base::Interpreter().addType(&Part::RectangularTrimmedSurfacePy
::Type,partModule,"RectangularTrimmedSurface");
Base::Interpreter().addType(&Part::PartFeaturePy ::Type,partModule,"Feature");
PyObject* brepModule = Py_InitModule3("BRepOffsetAPI", 0, "BrepOffsetAPI");
Py_INCREF(brepModule);
PyModule_AddObject(partModule, "BRepOffsetAPI", brepModule);
Base::Interpreter().addType(&Part::BRepOffsetAPI_MakePipeShellPy::Type,brepModule,"MakePipeShell");
Part::TopoShape ::init();
Part::PropertyPartShape ::init();
Part::PropertyGeometryList ::init();
Part::PropertyShapeHistory ::init();
Part::PropertyFilletEdges ::init();
Part::Feature ::init();
Part::FeatureExt ::init();
Part::FeaturePython ::init();
Part::FeatureGeometrySet ::init();
Part::CustomFeature ::init();
Part::CustomFeaturePython ::init();
Part::Primitive ::init();
Part::Box ::init();
Part::Fractal ::init();
Part::Spline ::init();
Part::Boolean ::init();
Part::Common ::init();
Part::MultiCommon ::init();
Part::Cut ::init();
Part::Fuse ::init();
Part::MultiFuse ::init();
Part::Section ::init();
Part::FilletBase ::init();
Part::Fillet ::init();
Part::Chamfer ::init();
Part::Compound ::init();
Part::Extrusion ::init();
Part::Revolution ::init();
Part::Mirroring ::init();
Part::ImportStep ::init();
Part::ImportIges ::init();
Part::ImportBrep ::init();
Part::CurveNet ::init();
Part::Polygon ::init();
Part::Circle ::init();
Part::Ellipse ::init();
Part::Vertex ::init();
Part::Line ::init();
Part::Ellipsoid ::init();
Part::Plane ::init();
Part::Sphere ::init();
Part::Cylinder ::init();
Part::Prism ::init();
Part::RegularPolygon ::init();
Part::Cone ::init();
Part::Torus ::init();
Part::Helix ::init();
Part::Spiral ::init();
Part::Wedge ::init();
Part::Part2DObject ::init();
Part::Part2DObjectPython ::init();
Part::RuledSurface ::init();
Part::Loft ::init();
Part::Sweep ::init();
Part::Offset ::init();
Part::Thickness ::init();
// Geometry types
Part::Geometry ::init();
Part::GeomPoint ::init();
Part::GeomCurve ::init();
Part::GeomBezierCurve ::init();
Part::GeomBSplineCurve ::init();
Part::GeomCircle ::init();
Part::GeomArcOfCircle ::init();
Part::GeomArcOfEllipse ::init();
Part::GeomArcOfParabola ::init();
Part::GeomArcOfHyperbola ::init();
Part::GeomEllipse ::init();
Part::GeomHyperbola ::init();
Part::GeomParabola ::init();
Part::GeomLine ::init();
Part::GeomLineSegment ::init();
Part::GeomOffsetCurve ::init();
Part::GeomTrimmedCurve ::init();
Part::GeomSurface ::init();
Part::GeomBezierSurface ::init();
Part::GeomBSplineSurface ::init();
Part::GeomCylinder ::init();
Part::GeomCone ::init();
Part::GeomSphere ::init();
Part::GeomToroid ::init();
Part::GeomPlane ::init();
Part::GeomOffsetSurface ::init();
Part::GeomTrimmedSurface ::init();
Part::GeomSurfaceOfRevolution ::init();
Part::GeomSurfaceOfExtrusion ::init();
IGESControl_Controller::Init();
STEPControl_Controller::Init();
// set the user-defined settings
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part");
// General
Base::Reference<ParameterGrp> hGenGrp = hGrp->GetGroup("General");
// http://www.opencascade.org/org/forum/thread_20801/
// read.surfacecurve.mode:
// A preference for the computation of curves in an entity which has both 2D and 3D representation.
// Each TopoDS_Edge in TopoDS_Face must have a 3D and 2D curve that references the surface.
// If both 2D and 3D representation of the entity are present, the computation of these curves depends on
// the following values of parameter:
// 0: "Default" - no preference, both curves are taken
// 3: "3DUse_Preferred" - 3D curves are used to rebuild 2D ones
// Additional modes for IGES
// 2: "2DUse_Preferred" - the 2D is used to rebuild the 3D in case of their inconsistency
// -2: "2DUse_Forced" - the 2D is always used to rebuild the 3D (even if 2D is present in the file)
// -3: "3DUse_Forced" - the 3D is always used to rebuild the 2D (even if 2D is present in the file)
int readsurfacecurve = hGenGrp->GetInt("ReadSurfaceCurveMode", 0);
Interface_Static::SetIVal("read.surfacecurve.mode", readsurfacecurve);
// write.surfacecurve.mode (STEP-only):
// This parameter indicates whether parametric curves (curves in parametric space of surface) should be
// written into the STEP file. This parameter can be set to Off in order to minimize the size of the resulting
// STEP file.
// Off (0) : writes STEP files without pcurves. This mode decreases the size of the resulting file.
// On (1) : (default) writes pcurves to STEP file
int writesurfacecurve = hGenGrp->GetInt("WriteSurfaceCurveMode", 1);
Interface_Static::SetIVal("write.surfacecurve.mode", writesurfacecurve);
//IGES handling
Base::Reference<ParameterGrp> hIgesGrp = hGrp->GetGroup("IGES");
int value = Interface_Static::IVal("write.iges.brep.mode");
bool brep = hIgesGrp->GetBool("BrepMode", value > 0);
Interface_Static::SetIVal("write.iges.brep.mode",brep ? 1 : 0);
Interface_Static::SetCVal("write.iges.header.company", hIgesGrp->GetASCII("Company").c_str());
Interface_Static::SetCVal("write.iges.header.author", hIgesGrp->GetASCII("Author").c_str());
//Interface_Static::SetCVal("write.iges.header.product", hIgesGrp->GetASCII("Product").c_str());
int unitIges = hIgesGrp->GetInt("Unit", 0);
switch (unitIges) {
case 1:
Interface_Static::SetCVal("write.iges.unit","M");
break;
case 2:
Interface_Static::SetCVal("write.iges.unit","IN");
break;
default:
Interface_Static::SetCVal("write.iges.unit","MM");
break;
}
//STEP handling
Base::Reference<ParameterGrp> hStepGrp = hGrp->GetGroup("STEP");
int unitStep = hStepGrp->GetInt("Unit", 0);
switch (unitStep) {
case 1:
Interface_Static::SetCVal("write.step.unit","M");
break;
case 2:
Interface_Static::SetCVal("write.step.unit","IN");
break;
default:
Interface_Static::SetCVal("write.step.unit","MM");
break;
}
std::string ap = hStepGrp->GetASCII("Scheme", Interface_Static::CVal("write.step.schema"));
Interface_Static::SetCVal("write.step.schema", ap.c_str());
}
static PyObject * importer(PyObject *self, PyObject *args)
{
char* Name;
char* DocName=0;
if (!PyArg_ParseTuple(args, "et|s","utf-8",&Name,&DocName))
return 0;
std::string Utf8Name = std::string(Name);
PyMem_Free(Name);
std::string name8bit = Part::encodeFilename(Utf8Name);
PY_TRY {
//Base::Console().Log("Insert in Part with %s",Name);
Base::FileInfo file(Utf8Name.c_str());
App::Document *pcDoc = 0;
if (DocName) {
pcDoc = App::GetApplication().getDocument(DocName);
}
if (!pcDoc) {
pcDoc = App::GetApplication().newDocument("Unnamed");
}
Handle(XCAFApp_Application) hApp = XCAFApp_Application::GetApplication();
Handle(TDocStd_Document) hDoc;
hApp->NewDocument(TCollection_ExtendedString("MDTV-CAF"), hDoc);
if (file.hasExtension("stp") || file.hasExtension("step")) {
try {
STEPCAFControl_Reader aReader;
aReader.SetColorMode(true);
aReader.SetNameMode(true);
aReader.SetLayerMode(true);
if (aReader.ReadFile((const char*)name8bit.c_str()) != IFSelect_RetDone) {
PyErr_SetString(Base::BaseExceptionFreeCADError, "cannot read STEP file");
return 0;
}
Handle_Message_ProgressIndicator pi = new Part::ProgressIndicator(100);
aReader.Reader().WS()->MapReader()->SetProgress(pi);
pi->NewScope(100, "Reading STEP file...");
pi->Show();
aReader.Transfer(hDoc);
pi->EndScope();
}
catch (OSD_Exception) {
Handle_Standard_Failure e = Standard_Failure::Caught();
Base::Console().Error("%s\n", e->GetMessageString());
Base::Console().Message("Try to load STEP file without colors...\n");
Part::ImportStepParts(pcDoc,Utf8Name.c_str());
pcDoc->recompute();
}
}
else if (file.hasExtension("igs") || file.hasExtension("iges")) {
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part")->GetGroup("IGES");
try {
IGESControl_Controller::Init();
IGESCAFControl_Reader aReader;
// http://www.opencascade.org/org/forum/thread_20603/?forum=3
aReader.SetReadVisible(hGrp->GetBool("SkipBlankEntities", true)
? Standard_True : Standard_False);
aReader.SetColorMode(true);
aReader.SetNameMode(true);
aReader.SetLayerMode(true);
if (aReader.ReadFile((const char*)name8bit.c_str()) != IFSelect_RetDone) {
PyErr_SetString(Base::BaseExceptionFreeCADError, "cannot read IGES file");
return 0;
}
Handle_Message_ProgressIndicator pi = new Part::ProgressIndicator(100);
aReader.WS()->MapReader()->SetProgress(pi);
pi->NewScope(100, "Reading IGES file...");
pi->Show();
aReader.Transfer(hDoc);
pi->EndScope();
}
catch (OSD_Exception) {
Handle_Standard_Failure e = Standard_Failure::Caught();
Base::Console().Error("%s\n", e->GetMessageString());
Base::Console().Message("Try to load IGES file without colors...\n");
Part::ImportIgesParts(pcDoc,Utf8Name.c_str());
pcDoc->recompute();
}
}
else {
PyErr_SetString(Base::BaseExceptionFreeCADError, "no supported file format");
return 0;
}
ImportOCAFExt ocaf(hDoc, pcDoc, file.fileNamePure());
ocaf.loadShapes();
pcDoc->recompute();
}
catch (Standard_Failure) {
App::DocumentObjectExecReturn *MultiFuse::execute(void)
{
std::vector<TopoDS_Shape> s;
std::vector<App::DocumentObject*> obj = Shapes.getValues();
std::vector<App::DocumentObject*>::iterator it;
for (it = obj.begin(); it != obj.end(); ++it) {
if ((*it)->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
s.push_back(static_cast<Part::Feature*>(*it)->Shape.getValue());
}
}
bool argumentsAreInCompound = false;
TopoDS_Shape compoundOfArguments;
//if only one source shape, and it is a compound - fuse children of the compound
if (s.size() == 1){
compoundOfArguments = s[0];
if (compoundOfArguments.ShapeType() == TopAbs_COMPOUND){
s.clear();
TopoDS_Iterator it(compoundOfArguments);
for (; it.More(); it.Next()) {
const TopoDS_Shape& aChild = it.Value();
s.push_back(aChild);
}
argumentsAreInCompound = true;
}
}
if (s.size() >= 2) {
try {
std::vector<ShapeHistory> history;
#if OCC_VERSION_HEX <= 0x060800
TopoDS_Shape resShape = s.front();
if (resShape.IsNull())
throw Base::Exception("Input shape is null");
for (std::vector<TopoDS_Shape>::iterator it = s.begin()+1; it != s.end(); ++it) {
if (it->IsNull())
throw Base::Exception("Input shape is null");
// Let's call algorithm computing a fuse operation:
BRepAlgoAPI_Fuse mkFuse(resShape, *it);
// Let's check if the fusion has been successful
if (!mkFuse.IsDone())
throw Base::Exception("Fusion failed");
resShape = mkFuse.Shape();
ShapeHistory hist1 = buildHistory(mkFuse, TopAbs_FACE, resShape, mkFuse.Shape1());
ShapeHistory hist2 = buildHistory(mkFuse, TopAbs_FACE, resShape, mkFuse.Shape2());
if (history.empty()) {
history.push_back(hist1);
history.push_back(hist2);
}
else {
for (std::vector<ShapeHistory>::iterator jt = history.begin(); jt != history.end(); ++jt)
*jt = joinHistory(*jt, hist1);
history.push_back(hist2);
}
}
#else
BRepAlgoAPI_Fuse mkFuse;
TopTools_ListOfShape shapeArguments,shapeTools;
shapeArguments.Append(s.front());
for (std::vector<TopoDS_Shape>::iterator it = s.begin()+1; it != s.end(); ++it) {
if (it->IsNull())
throw Base::Exception("Input shape is null");
shapeTools.Append(*it);
}
mkFuse.SetArguments(shapeArguments);
mkFuse.SetTools(shapeTools);
mkFuse.Build();
if (!mkFuse.IsDone())
throw Base::Exception("MultiFusion failed");
TopoDS_Shape resShape = mkFuse.Shape();
for (std::vector<TopoDS_Shape>::iterator it = s.begin(); it != s.end(); ++it) {
history.push_back(buildHistory(mkFuse, TopAbs_FACE, resShape, *it));
}
#endif
if (resShape.IsNull())
throw Base::Exception("Resulting shape is null");
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part/Boolean");
if (hGrp->GetBool("CheckModel", false)) {
BRepCheck_Analyzer aChecker(resShape);
if (! aChecker.IsValid() ) {
return new App::DocumentObjectExecReturn("Resulting shape is invalid");
}
}
if (hGrp->GetBool("RefineModel", false)) {
try {
TopoDS_Shape oldShape = resShape;
BRepBuilderAPI_RefineModel mkRefine(oldShape);
resShape = mkRefine.Shape();
ShapeHistory hist = buildHistory(mkRefine, TopAbs_FACE, resShape, oldShape);
for (std::vector<ShapeHistory>::iterator jt = history.begin(); jt != history.end(); ++jt)
*jt = joinHistory(*jt, hist);
}
catch (Standard_Failure) {
// do nothing
}
}
this->Shape.setValue(resShape);
if (argumentsAreInCompound){
//combine histories of every child of source compound into one
ShapeHistory overallHist;
TopTools_IndexedMapOfShape facesOfCompound;
TopAbs_ShapeEnum type = TopAbs_FACE;
TopExp::MapShapes(compoundOfArguments, type, facesOfCompound);
for (std::size_t iChild = 0; iChild < history.size(); iChild++){ //loop over children of source compound
//for each face of a child, find the inex of the face in compound, and assign the corresponding right-hand-size of the history
TopTools_IndexedMapOfShape facesOfChild;
TopExp::MapShapes(s[iChild], type, facesOfChild);
for(std::pair<const int,ShapeHistory::List> &histitem: history[iChild].shapeMap){ //loop over elements of history - that is - over faces of the child of source compound
int iFaceInChild = histitem.first;
ShapeHistory::List &iFacesInResult = histitem.second;
TopoDS_Shape srcFace = facesOfChild(iFaceInChild + 1); //+1 to convert our 0-based to OCC 1-bsed conventions
int iFaceInCompound = facesOfCompound.FindIndex(srcFace)-1;
overallHist.shapeMap[iFaceInCompound] = iFacesInResult; //this may overwrite existing info if the same face is used in several children of compound. This shouldn't be a problem, because the histories should match anyway...
}
}
history.clear();
history.push_back(overallHist);
}
this->History.setValues(history);
}
catch (Standard_Failure& e) {
return new App::DocumentObjectExecReturn(e.GetMessageString());
}
}
else {
throw Base::Exception("Not enough shape objects linked");
}
return App::DocumentObject::StdReturn;
}
void PartExport initPart()
{
std::stringstream str;
str << OCC_VERSION_MAJOR << "." << OCC_VERSION_MINOR << "." << OCC_VERSION_MAINTENANCE;
App::Application::Config()["OCC_VERSION"] = str.str();
// see Init.py
#if defined (_OCC64)
#if OCC_VERSION_HEX < 0x060503
App::GetApplication().addImportType("STEP (*.step *.stp)","Part");
App::GetApplication().addExportType("STEP (*.step *.stp)","Part");
#else
App::GetApplication().addImportType("STEP with colors (*.step *.stp)","ImportGui");
App::GetApplication().addExportType("STEP with colors (*.step *.stp)","ImportGui");
#endif
#endif
// This is highly experimental and we should keep an eye on it
// if we have mysterious crashes
// The argument must be 'Standard_False' to avoid FPE caused by
// Python's cmath module.
//#if defined(FC_OS_LINUX)
OSD::SetSignal(Standard_False);
//#endif
PyObject* partModule = Py_InitModule3("Part", Part_methods, module_part_doc); /* mod name, table ptr */
Base::Console().Log("Loading Part module... done\n");
// Add Types to module
Base::Interpreter().addType(&Part::TopoShapePy ::Type,partModule,"Shape");
Base::Interpreter().addType(&Part::TopoShapeVertexPy ::Type,partModule,"Vertex");
Base::Interpreter().addType(&Part::TopoShapeWirePy ::Type,partModule,"Wire");
Base::Interpreter().addType(&Part::TopoShapeEdgePy ::Type,partModule,"Edge");
Base::Interpreter().addType(&Part::TopoShapeSolidPy ::Type,partModule,"Solid");
Base::Interpreter().addType(&Part::TopoShapeFacePy ::Type,partModule,"Face");
Base::Interpreter().addType(&Part::TopoShapeCompoundPy ::Type,partModule,"Compound");
Base::Interpreter().addType(&Part::TopoShapeCompSolidPy ::Type,partModule,"CompSolid");
Base::Interpreter().addType(&Part::TopoShapeShellPy ::Type,partModule,"Shell");
Base::Interpreter().addType(&Part::LinePy ::Type,partModule,"Line");
Base::Interpreter().addType(&Part::PointPy ::Type,partModule,"Point");
Base::Interpreter().addType(&Part::CirclePy ::Type,partModule,"Circle");
Base::Interpreter().addType(&Part::EllipsePy ::Type,partModule,"Ellipse");
Base::Interpreter().addType(&Part::HyperbolaPy ::Type,partModule,"Hyperbola");
Base::Interpreter().addType(&Part::ParabolaPy ::Type,partModule,"Parabola");
Base::Interpreter().addType(&Part::ArcPy ::Type,partModule,"Arc");
Base::Interpreter().addType(&Part::ArcOfCirclePy ::Type,partModule,"ArcOfCircle");
Base::Interpreter().addType(&Part::BezierCurvePy ::Type,partModule,"BezierCurve");
Base::Interpreter().addType(&Part::BSplineCurvePy ::Type,partModule,"BSplineCurve");
Base::Interpreter().addType(&Part::OffsetCurvePy ::Type,partModule,"OffsetCurve");
Base::Interpreter().addType(&Part::PlanePy ::Type,partModule,"Plane");
Base::Interpreter().addType(&Part::CylinderPy ::Type,partModule,"Cylinder");
Base::Interpreter().addType(&Part::ConePy ::Type,partModule,"Cone");
Base::Interpreter().addType(&Part::SpherePy ::Type,partModule,"Sphere");
Base::Interpreter().addType(&Part::ToroidPy ::Type,partModule,"Toroid");
Base::Interpreter().addType(&Part::BezierSurfacePy ::Type,partModule,"BezierSurface");
Base::Interpreter().addType(&Part::BSplineSurfacePy ::Type,partModule,"BSplineSurface");
Base::Interpreter().addType(&Part::OffsetSurfacePy ::Type,partModule,"OffsetSurface");
Base::Interpreter().addType(&Part::SurfaceOfExtrusionPy ::Type,partModule,"SurfaceOfExtrusion");
Base::Interpreter().addType(&Part::SurfaceOfRevolutionPy::Type,partModule,"SurfaceOfRevolution");
Base::Interpreter().addType(&Part::RectangularTrimmedSurfacePy
::Type,partModule,"RectangularTrimmedSurface");
Base::Interpreter().addType(&Part::PartFeaturePy ::Type,partModule,"Feature");
PyObject* brepModule = Py_InitModule3("BRepOffsetAPI", 0, "BrepOffsetAPI");
Py_INCREF(brepModule);
PyModule_AddObject(partModule, "BRepOffsetAPI", brepModule);
Base::Interpreter().addType(&Part::BRepOffsetAPI_MakePipeShellPy::Type,brepModule,"MakePipeShell");
Part::TopoShape ::init();
Part::PropertyPartShape ::init();
Part::PropertyGeometryList ::init();
Part::PropertyShapeHistory ::init();
Part::PropertyFilletEdges ::init();
Part::Feature ::init();
Part::FeatureExt ::init();
Part::FeaturePython ::init();
Part::FeatureGeometrySet ::init();
Part::CustomFeature ::init();
Part::CustomFeaturePython ::init();
Part::Primitive ::init();
Part::Box ::init();
Part::Boolean ::init();
Part::Common ::init();
Part::MultiCommon ::init();
Part::Cut ::init();
Part::Fuse ::init();
Part::MultiFuse ::init();
Part::Section ::init();
Part::FilletBase ::init();
Part::Fillet ::init();
Part::Chamfer ::init();
Part::Extrusion ::init();
Part::Revolution ::init();
Part::Mirroring ::init();
Part::ImportStep ::init();
Part::ImportIges ::init();
Part::ImportBrep ::init();
Part::CurveNet ::init();
Part::Polygon ::init();
Part::Circle ::init();
Part::Ellipse ::init();
Part::Vertex ::init();
Part::Line ::init();
Part::Ellipsoid ::init();
Part::Plane ::init();
Part::Sphere ::init();
Part::Cylinder ::init();
Part::Cone ::init();
Part::Torus ::init();
Part::Helix ::init();
Part::Wedge ::init();
Part::Part2DObject ::init();
Part::Part2DObjectPython ::init();
Part::RuledSurface ::init();
Part::Loft ::init();
Part::Sweep ::init();
Part::Offset ::init();
Part::Thickness ::init();
// Geometry types
Part::Geometry ::init();
Part::GeomPoint ::init();
Part::GeomCurve ::init();
Part::GeomBezierCurve ::init();
Part::GeomBSplineCurve ::init();
Part::GeomCircle ::init();
Part::GeomArcOfCircle ::init();
Part::GeomEllipse ::init();
Part::GeomHyperbola ::init();
Part::GeomParabola ::init();
Part::GeomLine ::init();
Part::GeomLineSegment ::init();
Part::GeomOffsetCurve ::init();
Part::GeomTrimmedCurve ::init();
Part::GeomSurface ::init();
Part::GeomBezierSurface ::init();
Part::GeomBSplineSurface ::init();
Part::GeomCylinder ::init();
Part::GeomCone ::init();
Part::GeomSphere ::init();
Part::GeomToroid ::init();
Part::GeomPlane ::init();
Part::GeomOffsetSurface ::init();
Part::GeomTrimmedSurface ::init();
Part::GeomSurfaceOfRevolution ::init();
Part::GeomSurfaceOfExtrusion ::init();
// set the user-defined units
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part");
int unit = hGrp->GetInt("Unit", 0);
switch (unit) {
case 1:
Interface_Static::SetCVal("write.iges.unit","M");
Interface_Static::SetCVal("write.step.unit","M");
break;
case 2:
Interface_Static::SetCVal("write.iges.unit","IN");
Interface_Static::SetCVal("write.step.unit","IN");
break;
default:
Interface_Static::SetCVal("write.iges.unit","MM");
Interface_Static::SetCVal("write.step.unit","MM");
break;
}
}
void AutoSaver::saveDocument(const std::string& name, AutoSaveProperty& saver)
{
Gui::WaitCursor wc;
App::Document* doc = App::GetApplication().getDocument(name.c_str());
if (doc) {
// Set the document's current transient directory
std::string dirName = doc->TransientDir.getValue();
dirName += "/fc_recovery_files";
saver.dirName = dirName;
// Write recovery meta file
QFile file(QString::fromLatin1("%1/fc_recovery_file.xml")
.arg(QString::fromUtf8(doc->TransientDir.getValue())));
if (file.open(QFile::WriteOnly)) {
QTextStream str(&file);
str.setCodec("UTF-8");
str << "<?xml version='1.0' encoding='utf-8'?>" << endl
<< "<AutoRecovery SchemaVersion=\"1\">" << endl;
str << " <Status>Created</Status>" << endl;
str << " <Label>" << QString::fromUtf8(doc->Label.getValue()) << "</Label>" << endl; // store the document's current label
str << " <FileName>" << QString::fromUtf8(doc->FileName.getValue()) << "</FileName>" << endl; // store the document's current filename
str << "</AutoRecovery>" << endl;
file.close();
}
// make sure to tmp. disable saving thumbnails because this causes trouble if the
// associated 3d view is not active
Base::Reference<ParameterGrp> hGrp = App::GetApplication().GetParameterGroupByPath
("User parameter:BaseApp/Preferences/Document");
bool save = hGrp->GetBool("SaveThumbnail",false);
hGrp->SetBool("SaveThumbnail",false);
getMainWindow()->showMessage(tr("Please wait until the AutoRecovery file has been saved..."), 5000);
//qApp->processEvents();
// open extra scope to close ZipWriter properly
Base::StopWatch watch;
watch.start();
{
if (!this->compressed) {
RecoveryWriter writer(saver);
if (hGrp->GetBool("SaveBinaryBrep", true))
writer.setMode("BinaryBrep");
writer.putNextEntry("Document.xml");
doc->Save(writer);
// Special handling for Gui document.
doc->signalSaveDocument(writer);
// write additional files
writer.writeFiles();
}
else {
std::string fn = doc->TransientDir.getValue();
fn += "/fc_recovery_file.fcstd";
Base::FileInfo tmp(fn);
Base::ofstream file(tmp, std::ios::out | std::ios::binary);
if (file.is_open())
{
Base::ZipWriter writer(file);
if (hGrp->GetBool("SaveBinaryBrep", true))
writer.setMode("BinaryBrep");
writer.setComment("AutoRecovery file");
writer.setLevel(1); // apparently the fastest compression
writer.putNextEntry("Document.xml");
doc->Save(writer);
// Special handling for Gui document.
doc->signalSaveDocument(writer);
// write additional files
writer.writeFiles();
}
}
}
std::string str = watch.toString(watch.elapsed());
Base::Console().Log("Save AutoRecovery file: %s\n", str.c_str());
hGrp->SetBool("SaveThumbnail",save);
}
}
void DlgImportExportStep::saveSettings()
{
int unit = ui->comboBoxUnits->currentIndex();
Base::Reference<ParameterGrp> hPartGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod/Part");
// General
Base::Reference<ParameterGrp> hGenGrp = hPartGrp->GetGroup("General");
int writesurfacecurve = ui->checkBoxPcurves->isChecked() ? 1 : 0;
hGenGrp->SetInt("WriteSurfaceCurveMode", writesurfacecurve);
Interface_Static::SetIVal("write.surfacecurve.mode", writesurfacecurve);
// STEP
Base::Reference<ParameterGrp> hStepGrp = hPartGrp->GetGroup("STEP");
hStepGrp->SetInt("Unit", unit);
switch (unit) {
case 1:
Interface_Static::SetCVal("write.step.unit","M");
break;
case 2:
Interface_Static::SetCVal("write.step.unit","IN");
break;
default:
Interface_Static::SetCVal("write.step.unit","MM");
break;
}
// scheme
if (ui->radioButtonAP203->isChecked()) {
Interface_Static::SetCVal("write.step.schema","AP203");
hStepGrp->SetASCII("Scheme", "AP203");
}
else {
// possible values: AP214CD (1996), AP214DIS (1998), AP214IS (2002)
Interface_Static::SetCVal("write.step.schema","AP214IS");
hStepGrp->SetASCII("Scheme", "AP214IS");
}
// header info
hStepGrp->SetASCII("Company", ui->lineEditCompany->text().toLatin1());
hStepGrp->SetASCII("Author", ui->lineEditAuthor->text().toLatin1());
//hStepGrp->SetASCII("Product", ui->lineEditProduct->text().toLatin1());
// (h)STEP of Import module
ui->checkBoxMergeCompound->onSave();
}
