void myGlutMouse(int button, int state, int x, int y){
GLint viewport[4];
::glGetIntegerv(GL_VIEWPORT,viewport);
const int win_w = viewport[2];
const int win_h = viewport[3];
mov_begin_x = (2.0*x-win_w)/win_w;
mov_begin_y = (win_h-2.0*y)/win_h;
imodifier = ::glutGetModifiers();
if( state == GLUT_DOWN && imodifier == 0 ){
const unsigned int size_buffer = 2048;
unsigned int selec_buffer[size_buffer];
Com::View::PickPre(size_buffer,selec_buffer, x,y,5,5, camera);
drawer_ary.DrawSelection();
std::vector<Com::View::SSelectedObject> aSelecObj = Com::View::PickPost(selec_buffer, x,y, camera );
drawer_ary.ClearSelected();
if( aSelecObj.size() > 0 ){
drawer_ary.AddSelected( aSelecObj[0].name );
if( aSelecObj[0].name[1] == 3 ){ id_loop_selected = aSelecObj[0].name[2]; picked_pos = aSelecObj[0].picked_pos; }
else{ id_loop_selected = 0; }
mouse_pos = picked_pos;
}
}
if( state == GLUT_UP && imodifier == 0 ){
if( imode == 1 ){
if( cad_3d.IsElemID(Cad::LOOP,id_loop_selected) ){
const Cad::CLoop3D& l = cad_3d.GetLoop(id_loop_selected);
const Com::CVector2D v0 = l.Project(picked_pos);
const Com::CVector2D v1 = l.Project(mouse_pos);
cad_3d.AddRectLoop(id_loop_selected,v0,v1);
id_loop_selected = 0;
drawer_ary.Clear();
drawer_ary.PushBack( new Cad::View::CDrawer_Cad3D(cad_3d) );
}
}
}
}
void myGlutMotion( int x, int y ){
GLint viewport[4];
::glGetIntegerv(GL_VIEWPORT,viewport);
const int win_w = viewport[2];
const int win_h = viewport[3];
const double mov_end_x = (2.0*x-win_w)/win_w;
const double mov_end_y = (win_h-2.0*y)/win_h;
if( imodifier == GLUT_ACTIVE_CTRL ){
camera.MouseRotation(mov_begin_x,mov_begin_y,mov_end_x,mov_end_y);
}
else if( imodifier == GLUT_ACTIVE_SHIFT ){
camera.MousePan(mov_begin_x,mov_begin_y,mov_end_x,mov_end_y);
}
else if( cad_3d.IsElemID(Cad::LOOP,id_loop_selected) ){
if( imode == 0 ){
if( cad_3d.IsElemID(Cad::LOOP,id_loop_selected) ){
Com::CVector3D nv = cad_3d.GetLoop(id_loop_selected).normal;
double n[3] = { nv.x, nv.y, nv.z };
double r[9]; camera.RotMatrix33(r);
double nr[3] = { r[0]*n[0]+r[1]*n[1]+r[2]*n[2], r[3]*n[0]+r[4]*n[1]+r[5]*n[2], r[6]*n[0]+r[7]*n[1]+r[8]*n[2] };
double del[2] = { mov_end_x-mov_begin_x, mov_end_y-mov_begin_y };
nr[0] /= camera.GetHalfViewHeight()*camera.GetWindowAspect();
nr[1] /= camera.GetHalfViewHeight();
if( nr[0]*nr[0] + nr[1]*nr[1] > 1.0e-5 ){
double r = (nr[0]*del[0]+nr[1]*del[1])/(nr[0]*nr[0]+nr[1]*nr[1]);
cad_3d.LiftLoop(id_loop_selected,nv*r);
drawer_ary.Clear();
drawer_ary.PushBack( new Cad::View::CDrawer_Cad3D(cad_3d) );
}
}
}
if( imode == 1 ){
if( cad_3d.IsElemID(Cad::LOOP,id_loop_selected) ){
const Cad::CLoop3D& l = cad_3d.GetLoop(id_loop_selected);
const Com::CVector3D& o0 = l.org;
const Com::CVector3D& n0 = l.normal;
Com::CMatrix3 r = camera.RotMatrix33();
Com::CVector3D d1 = r.MatVecTrans( Com::CVector3D(0,0,-1) );
double hvh = camera.GetHalfViewHeight();
double asp = camera.GetWindowAspect();
Com::CVector3D cp = -camera.GetCenterPosition()+Com::CVector3D(hvh*asp*mov_end_x,hvh*mov_end_y,0);
Com::CVector3D o1 = r.MatVecTrans( cp ) + camera.GetObjectCenter();
double tmp0 = Dot(d1,n0);
double tmp1 = Dot(o0-o1,n0);
double tmp2 = tmp1/tmp0;
mouse_pos = o1+d1*tmp2;
}
}
}
mov_begin_x = mov_end_x;
mov_begin_y = mov_end_y;
::glutPostRedisplay();
}
void myGlutDisplay(void)
{
// ::glClearColor(0.2, .7, 0.7, 1.0);
::glClearColor(1.0, 1.0, 1.0, 1.0);
::glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
::glEnable(GL_DEPTH_TEST);
::glEnable(GL_POLYGON_OFFSET_FILL );
::glPolygonOffset( 1.1f, 4.0f );
::glMatrixMode(GL_MODELVIEW);
::glLoadIdentity();
Com::View::SetModelViewTransform(camera);
ShowBackGround();
ShowFPS();
{
::glDisable(GL_LIGHTING);
::glLineWidth(2);
/*
std::vector<unsigned int> aIdL = cad_3d.GetAryElemID(Cad::LOOP);
for(unsigned int iil=0;iil<aIdL.size();iil++){
unsigned int id_l = aIdL[iil];
const Cad::CLoop3D& l = cad_3d.GetLoop(id_l);
const Com::CVector3D& o = l.org;
const Com::CVector3D& n = l.normal;
double r = 0.1;
::glBegin(GL_LINES);
::glColor3d(1,0,0);
::glVertex3d(o.x,o.y,o.z);
::glVertex3d(o.x+n.x*r,o.y+n.y*r,o.z+n.z*r);
::glEnd();
}
*/
if( imode == 1 ){
if( cad_3d.IsElemID(Cad::LOOP,id_loop_selected) ){
const Cad::CLoop3D& l = cad_3d.GetLoop(id_loop_selected);
const Com::CVector3D& o0 = l.org;
const Com::CVector3D& n0 = l.normal;
Com::CVector3D x0 = l.dirx;
Com::CVector3D y0 = Cross(n0,x0);
x0 = Dot(mouse_pos-picked_pos,x0)*x0;
y0 = Dot(mouse_pos-picked_pos,y0)*y0;
const Com::CVector3D& p = picked_pos;
const Com::CVector3D& px = picked_pos+x0;
const Com::CVector3D& py = picked_pos+y0;
const Com::CVector3D& pxy = picked_pos+x0+y0;
::glLineWidth(1);
::glColor3d(0,0,0);
::glBegin(GL_LINES);
::glVertex3d(p.x,p.y,p.z);
::glVertex3d(px.x,px.y,px.z);
::glVertex3d(p.x,p.y,p.z);
::glVertex3d(py.x,py.y,py.z);
::glVertex3d(pxy.x,pxy.y,pxy.z);
::glVertex3d(px.x,px.y,px.z);
::glVertex3d(pxy.x,pxy.y,pxy.z);
::glVertex3d(py.x,py.y,py.z);
::glEnd();
}
/*
::glBegin(GL_POINTS);
::glColor3d(1,0,0);
::glVertex3d(picked_pos.x,picked_pos.y,picked_pos.z);
::glColor3d(1,0,1);
::glVertex3d(mouse_pos.x,mouse_pos.y,mouse_pos.z);
::glEnd();
*/
}
::glEnable(GL_LIGHTING);
}
drawer_ary.Draw();
glutSwapBuffers();
}
bool SetNewProblem()
{
const unsigned int nprob = 4;
static unsigned int iprob = 0;
std::cout << "SetNewProblem() " << iprob << std::endl;
cad_3d.Clear();
if( iprob == 0 ){
unsigned int id_s0 = cad_3d.AddCuboid(1,1,1);
drawer_ary.Clear();
drawer_ary.PushBack( new Cad::View::CDrawer_Cad3D(cad_3d) );
drawer_ary.InitTrans(camera);
}
if( iprob == 1 ){
unsigned int id_s0 = cad_3d.AddCuboid(1,1,0.7);
unsigned int id_l1 = 0;
{
std::vector<Com::CVector3D> aVec;
aVec.push_back( Com::CVector3D(0.5,0.2,0.7) );
aVec.push_back( Com::CVector3D(0.8,0.2,0.7) );
aVec.push_back( Com::CVector3D(0.8,0.8,0.7) );
aVec.push_back( Com::CVector3D(0.5,0.8,0.7) );
id_l1 = cad_3d.AddPolygon(aVec,6);
}
unsigned int id_l2 = 0;
{
std::vector<Com::CVector3D> aVec;
aVec.push_back( Com::CVector3D(0.2,1.0,0.3) );
aVec.push_back( Com::CVector3D(0.2,1.0,0.5) );
aVec.push_back( Com::CVector3D(0.8,1.0,0.5) );
aVec.push_back( Com::CVector3D(0.8,1.0,0.3) );
id_l2 = cad_3d.AddPolygon(aVec,3);
}
cad_3d.LiftLoop(id_l1,cad_3d.GetLoop(id_l1).normal* 0.2);
cad_3d.LiftLoop(id_l2,cad_3d.GetLoop(id_l2).normal*-0.2);
{
const unsigned int id_v1 = cad_3d.AddPoint( Cad::EDGE,1, Com::CVector3D(0,0.7,0 ) );
const unsigned int id_v2 = cad_3d.AddPoint( Cad::EDGE,9, Com::CVector3D(0,0.7,0.7) );
Cad::CBRepSurface::CResConnectVertex res = cad_3d.ConnectVertex(id_v1, id_v2);
unsigned int id_l_lift = cad_3d.GetIdLoop_Edge(res.id_e_add,true);
cad_3d.LiftLoop(id_l_lift,cad_3d.GetLoop(id_l_lift).normal*0.2);
}
{
const unsigned int id_v1 = cad_3d.AddPoint( Cad::EDGE,9, Com::CVector3D(0,0.3,0.7 ) );
const unsigned int id_v2 = cad_3d.AddPoint( Cad::EDGE,5, Com::CVector3D(0,0.0,0.2 ) );
const unsigned int id_v3 = cad_3d.AddPoint( Cad::LOOP,17,Com::CVector3D(0,0.3,0.2 ) );
cad_3d.ConnectVertex(id_v1, id_v3);
Cad::CBRepSurface::CResConnectVertex res = cad_3d.ConnectVertex(id_v2, id_v3);
unsigned int id_l_lift = res.id_l_add;
cad_3d.LiftLoop(id_l_lift,cad_3d.GetLoop(id_l_lift).normal*-0.2);
}
cad_3d.LiftLoop(6,Com::CVector3D(0,0,-0.1));
{
const unsigned int id_v1 = cad_3d.AddPoint( Cad::EDGE,3, Com::CVector3D(1.0,0.2,0.0 ) );
const unsigned int id_v2 = cad_3d.AddPoint( Cad::LOOP,4, Com::CVector3D(1.0,0.2,0.2 ) );
const unsigned int id_v3 = cad_3d.AddPoint( Cad::LOOP,4, Com::CVector3D(1.0,0.6,0.2 ) );
const unsigned int id_v4 = cad_3d.AddPoint( Cad::EDGE,3, Com::CVector3D(1.0,0.6,0.0 ) );
cad_3d.ConnectVertex(id_v1, id_v2);
cad_3d.ConnectVertex(id_v2, id_v3);
Cad::CBRepSurface::CResConnectVertex res = cad_3d.ConnectVertex(id_v3, id_v4);
unsigned int id_l_lift = res.id_l_add;
cad_3d.LiftLoop(id_l_lift,cad_3d.GetLoop(id_l_lift).normal*-0.1);
}
drawer_ary.Clear();
drawer_ary.PushBack( new Cad::View::CDrawer_Cad3D(cad_3d) );
drawer_ary.InitTrans(camera);
}
if( iprob == 2 ){
unsigned int id_s0 = cad_3d.AddCuboid(1,1,1);
cad_3d.AddRectLoop(1, Com::CVector2D(0.2,0.2), Com::CVector2D(0.8,1.2) );
cad_3d.LiftLoop(1,cad_3d.GetLoop(1).normal*0.1);
// cad_3d.LiftLoop(7,cad_3d.GetLoop(7).normal*0.1);
drawer_ary.Clear();
drawer_ary.PushBack( new Cad::View::CDrawer_Cad3D(cad_3d) );
drawer_ary.InitTrans(camera);
}
if( iprob == 3 ){
unsigned int id_s0 = cad_3d.AddCuboid(1,1,1);
cad_3d.AddRectLoop(6,
cad_3d.GetLoop(6).Project(Com::CVector3D(0.2,0.2,1)),
cad_3d.GetLoop(6).Project(Com::CVector3D(0.8,0.8,1)) );
cad_3d.AddRectLoop(7,
cad_3d.GetLoop(7).Project(Com::CVector3D(0.3,0.3,1)),
cad_3d.GetLoop(7).Project(Com::CVector3D(0.7,0.7,1)) );
// cad_3d.AddRectLoop(7, Com::CVector2D(0.3,0.3), Com::CVector2D(0.7,0.7) );
cad_3d.LiftLoop(7,cad_3d.GetLoop(7).normal*0.1);
drawer_ary.Clear();
drawer_ary.PushBack( new Cad::View::CDrawer_Cad3D(cad_3d) );
drawer_ary.InitTrans(camera);
}
::glMatrixMode(GL_PROJECTION);
::glLoadIdentity();
Com::View::SetProjectionTransform(camera);
iprob++;
if( iprob == nprob ) iprob=0;
return true;
}
bool CDrawer_Cad3D::UpdateCAD_TopologyGeometry(const Cad::CCadObj3D& cad_3d)
{
this->sutable_rot_mode = 3;
//! 今までのDrawerPartの配列を一端バッファにコピーして，必要な物だけを戻す
for(unsigned int idp=0;idp<m_apIndexAry.size();idp++){ delete m_apIndexAry[idp]; }
m_apIndexAry.clear();
m_aIndexVertex.clear();
std::vector<CVector3D> aVec3D;
aVec3D.reserve(256);
const std::vector<unsigned int>& aIdV = cad_3d.GetAryElemID(Cad::VERTEX);
for(unsigned int i=0;i<aIdV.size();i++){
aVec3D.push_back( cad_3d.GetVertexCoord(aIdV[i]) );
}
{
const std::vector<unsigned int>& aIdE = cad_3d.GetAryElemID(Cad::EDGE);
for(unsigned int iie=0;iie<aIdE.size();iie++){
unsigned int id_e = aIdE[iie];
assert( cad_3d.IsElemID(Cad::EDGE,id_e) );
unsigned int id_vs, id_ve;
cad_3d.GetIdVertex_Edge(id_vs,id_ve,id_e);
CDrawPart* pcp = new CDrawPart();
CDrawPart& cp = *pcp;
cp.is_show = true;
cp.itype = Cad::EDGE;
cp.id_cad = id_e;
cp.nelem = 1;
cp.npoel = 2;
cp.pIndexArray = new unsigned int [2];
cp.pIndexArray[0] = id_vs-1;
cp.pIndexArray[1] = id_ve-1;
m_apIndexAry.push_back(pcp);
}
}
{
const std::vector<unsigned int>& aIdL = cad_3d.GetAryElemID(Cad::LOOP);
for(unsigned int iil=0;iil<aIdL.size();iil++){
unsigned int id_l = aIdL[iil];
assert( cad_3d.IsElemID(Cad::LOOP,id_l) );
Msh::CMesher2D msh2d( CLoopPxy2D(cad_3d,id_l) );
const std::vector<Msh::CTriAry2D>& aTriAry = msh2d.GetTriArySet();
// const std::vector<CVector2D>& aVec2D = msh2d.GetVectorAry();
if( aTriAry.size() != 1 ) continue;
const unsigned int ntri = aTriAry[0].m_aTri.size();
// std::cout << aTriAry[0].m_aTri.size() << std::endl;
// std::cout << aVec2D.size() << std::endl;
CDrawPart* pcp = new CDrawPart();
CDrawPart& cp = *pcp;
cp.is_show = true;
cp.itype = Cad::LOOP;
cp.id_cad = id_l;
{
const Cad::CLoop3D& l = cad_3d.GetLoop(id_l);
const Com::CVector3D& n = l.normal;
cp.is_const_normal = true;
cp.normal[0] = n.x;
cp.normal[1] = n.y;
cp.normal[2] = n.z;
}
cp.nelem = ntri;
cp.npoel = 3;
cp.pIndexArray = new unsigned int [ntri*3];
for(unsigned int itri=0;itri<ntri;itri++){
cp.pIndexArray[itri*3+0] = aTriAry[0].m_aTri[itri].v[0];
cp.pIndexArray[itri*3+1] = aTriAry[0].m_aTri[itri].v[1];
cp.pIndexArray[itri*3+2] = aTriAry[0].m_aTri[itri].v[2];
}
m_apIndexAry.push_back(pcp);
}
}
{
for(unsigned int i=0;i<aIdV.size();i++){
CDrawPart_CadVertex dpv;
dpv.id_cad = aIdV[i];
dpv.is_selected = false;
dpv.iv = i;
dpv.is_show = true;
m_aIndexVertex.push_back(dpv);
}
}
{ // 座標をセット
const unsigned int npoin = aVec3D.size();
const unsigned int ndim = 3;
m_vertex_ary.SetSize(npoin,ndim);
for(unsigned int ipoin=0;ipoin<npoin;ipoin++){
m_vertex_ary.pVertexArray[ipoin*ndim ] = aVec3D[ipoin].x;
m_vertex_ary.pVertexArray[ipoin*ndim+1] = aVec3D[ipoin].y;
m_vertex_ary.pVertexArray[ipoin*ndim+2] = aVec3D[ipoin].z;
}
}
return true;
}