int main(int argc, char* argv[])
{
// Check arguments
if (argc < 3) {
std::cerr << "Usage: shallow_water NODES_FILE TRIS_FILE\n";
exit(1);
}
MeshType mesh;
// HW4B: Need node_type before this can be used!
#if 1
std::vector<typename MeshType::node_type> mesh_node;
#endif
// Read all Points and add them to the Mesh
std::ifstream nodes_file(argv[1]);
Point p;
while (CS207::getline_parsed(nodes_file, p)) {
// HW4B: Need to implement add_node before this can be used!
#if 1
mesh_node.push_back(mesh.add_node(p));
#endif
}
// Read all mesh triangles and add them to the Mesh
std::ifstream tris_file(argv[2]);
std::array<int,3> t;
while (CS207::getline_parsed(tris_file, t)) {
// HW4B: Need to implement add_triangle before this can be used!
#if 1
mesh.add_triangle(mesh_node[t[0]], mesh_node[t[1]], mesh_node[t[2]]);
#endif
}
// Print out the stats
std::cout << mesh.num_nodes() << " "
<< mesh.num_edges() << " "
<< mesh.num_triangles() << std::endl;
// HW4B Initialization
// Set the initial conditions based off third argument
// Perform any needed precomputation
std::pair<double, double> value_pair;
if ((*argv[3]) == '0') {
std::cout << "Pebble Ripple" << std::endl;
value_pair = PebbleRipple()(mesh);
} else if ((*argv[3]) == '1') {
std::cout << "Sharp Wave" << std::endl;
value_pair = SharpWave()(mesh);
} else {
std::cout << "Dam Break" << std::endl;
value_pair = DamBreak()(mesh);
}
double max_height = value_pair.first;
double min_edge_length = value_pair.second;
// Launch the SDLViewer
CS207::SDLViewer viewer;
viewer.launch();
// HW4B: Need to define Mesh::node_type and node/edge iterator
// before these can be used!
#if 1
auto node_map = viewer.empty_node_map(mesh);
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
CS207::DefaultColor(), NodePosition(), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
#endif
viewer.center_view();
// CFL stability condition requires dt <= dx / max|velocity|
// For the shallow water equations with u = v = 0 initial conditions
// we can compute the minimum edge length and maximum original water height
// to set the time-step
// Compute the minimum edge length and maximum water height for computing dt
#if 1
double dt = 0.25 * min_edge_length / (sqrt(grav * max_height));
#else
// Placeholder!! Delete me when min_edge_length and max_height can be computed!
double dt = 0.1;
#endif
double t_start = 0;
double t_end = 5;
// Preconstruct a Flux functor
EdgeFluxCalculator f;
// Begin the time stepping
for (double t = t_start; t < t_end; t += dt) {
// Step forward in time with forward Euler
hyperbolic_step(mesh, f, t, dt);
// Update node values with triangle-averaged values
post_process(mesh);
// Update the viewer with new node positions
#if 1
// Update viewer with nodes' new positions
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
CoolColor(), NodePosition(), node_map);
#endif
viewer.set_label(t);
// These lines slow down the animation for small meshes.
// Feel free to remove them or tweak the constants.
if (mesh.num_nodes() < 100)
CS207::sleep(0.05);
}
return 0;
}
int main(int argc, char** argv) {
// Check arguments
if (argc < 5) {
std::cerr << "Usage: " << argv[0] << " NODES_FILE TETS_FILE\n";
exit(1);
}
// Construct the first mesh
MeshType mesh;
//construct the second mesh
MeshType mesh2;
std::vector<typename MeshType::node_type> mesh_node;
// Read all Points and add them to the Mesh
std::ifstream nodes_file(argv[1]);
Point p;
while (CS207::getline_parsed(nodes_file, p)) {
mesh_node.push_back(mesh.add_node(p));
}
// Read all mesh triangles and add them to the Mesh
std::ifstream tris_file(argv[2]);
std::array<int,3> t;
while (CS207::getline_parsed(tris_file, t)) {
mesh.add_triangle(mesh_node[t[0]], mesh_node[t[1]], mesh_node[t[2]]);
}
std::vector<typename MeshType::node_type> mesh_node2;
// Read all Points and add them to the Mesh
std::ifstream nodes_file2(argv[3]);
while (CS207::getline_parsed(nodes_file2, p)) {
mesh_node2.push_back(mesh2.add_node(p));
}
// Read all mesh triangles and add them to the Mesh
std::ifstream tris_file2(argv[4]);
while (CS207::getline_parsed(tris_file2, t)) {
mesh2.add_triangle(mesh_node2[t[0]], mesh_node2[t[1]], mesh_node2[t[2]]);
}
//move the second mesh to the specified position
for(auto it = mesh2.node_begin();it!=mesh2.node_end();++it){
(*it).position().elem[1] +=4 ;
(*it).position().elem[2] +=4 ;
}
// Print out the stats
std::cout << mesh.num_nodes() << " "
<< mesh.num_edges() << " "
<< mesh.num_triangles() << std::endl;
std::cout << mesh2.num_nodes() << " "
<< mesh2.num_edges() << " "
<< mesh2.num_triangles() << std::endl;
//set the mass and velocity of each Node for the first mesh
for (auto it = mesh.node_begin(); it != mesh.node_end(); ++it){
(*it).value().mass = float(1)/mesh.num_nodes();
(*it).value().velocity = Point(0, 10, 10);
}
//set the mass and velocity of each Node for the second mesh
for (auto it = mesh2.node_begin(); it != mesh2.node_end(); ++it){
(*it).value().mass = float(1)/mesh.num_nodes();
(*it).value().velocity = Point(0, -10, -10);
}
//set K and L for each edge
for (auto it = mesh.node_begin(); it != mesh.node_end(); ++it)
{
for (auto j = (*it).edge_begin(); j != (*it).edge_end(); ++j){
(*j).value().L = (*j).length();
(*j).value().K = 16000;
}
}
for (auto it = mesh2.node_begin(); it != mesh2.node_end(); ++it)
{
for (auto j = (*it).edge_begin(); j != (*it).edge_end(); ++j){
(*j).value().L = (*j).length();
(*j).value().K = 16000;
}
}
// Launch the SDLViewer
CS207::SDLViewer viewer;
auto node_map = viewer.empty_node_map(mesh);
viewer.launch();
viewer.add_nodes(mesh.node_begin(), mesh.node_end(), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
viewer.add_nodes(mesh2.node_begin(), mesh2.node_end(), node_map);
viewer.add_edges(mesh2.edge_begin(), mesh2.edge_end(), node_map);
viewer.center_view();
//Begin the mass-spring simulation
double dt = 0.0002;
double t_start = 0.0;
double t_end = 10.0;
//three color parameter
int color1 = 1;
int color2 = 1;
int color3 = 1;
//Create listener
Pause_listener* pause = new Pause_listener(dt);
Speed_listener* speed = new Speed_listener(dt, dt);
XYZ_listener<MeshType>* xyz = new XYZ_listener<MeshType>(&mesh);
Color_listener* col = new Color_listener(&color1, &color2, &color3);
//add listener
viewer.add_listener(pause);
viewer.add_listener(speed);
viewer.add_listener(xyz);
viewer.add_listener(col);
//Initialize forces
WindForce wind_force(Point(0,100,200));
PressureForce<typename MeshType::node_type, MeshType> pressure_force(1, 2500, &mesh);
DampingForce damp_force(float(1)/mesh.num_nodes());
//auto force = make_combined_force(MassSpringForce(), GravityForce(), make_combined_force(pressure_force, damp_force, wind_force));
auto force = make_combined_force(MassSpringForce(), make_combined_force(pressure_force, damp_force, wind_force));
//Initialize constriants
auto constraint = PlaneConstraint<MeshType>(-4);
//simulation processing
for (double t = t_start; t < t_end; t += dt) {
constraint(mesh, 0);
constraint(mesh2, 0);
//define a collision constrain
auto collision_constrain = CollisionConstraint<MeshType>();
//add the forces to the meshs at each dt
symp_euler_step(mesh, t, dt, force);
symp_euler_step(mesh2, t, dt, force);
//detec the collision betweent the two meshes
CollisionDetector<MeshType> c;
c.add_object(mesh);
c.add_object(mesh2);
c.check_collisions();
std::vector<unsigned> collision;
std::vector<unsigned> collision2;
//find the corresponding mesh for each node
for (auto it=c.begin(); it!= c.end(); ++it){
auto boom = *it;
Node n = boom.n1;
if (boom.mesh1 == &mesh)
collision.push_back(n.index());
if (boom.mesh1 == &mesh2)
collision2.push_back(n.index());
}
//add the collision constrain to the meshes
collision_constrain(mesh,mesh2,collision,collision2);
viewer.set_label(t);
//update with removed nodes
//clear teh viewer's node
viewer.clear();
node_map.clear();
//update viewer with new positions and new edges
viewer.add_nodes(mesh.node_begin(), mesh.node_end(), color(color1, color2, color3), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
viewer.add_nodes(mesh2.node_begin(), mesh2.node_end(), color(color1, color2, color3), node_map);
viewer.add_edges(mesh2.edge_begin(), mesh2.edge_end(), node_map);
// These lines slow down the animation for small graphs
if (mesh.num_nodes() < 100)
CS207::sleep(0.001);
}
return 0;
}
int main(int argc, char* argv[]) {
// Check arguments
if (argc < 2) {
std::cerr << "Usage: " << argv[0] << " NODES_FILE TETS_FILE\n";
exit(1);
}
MeshType mesh;
std::vector<typename MeshType::node_type> nodes;
// Create a nodes_file from the first input argument
std::ifstream nodes_file(argv[1]);
// Interpret each line of the nodes_file as a 3D Point and add to the Mesh
Point p;
while (CS207::getline_parsed(nodes_file, p))
nodes.push_back(mesh.add_node(p));
// Create a trianges_file from the second input argument
std::ifstream triangles_file(argv[2]);
// Interpret each line of the tets_file as three ints which refer to nodes
std::array<int,3> t;
// add in the triangles
while (CS207::getline_parsed(triangles_file, t))
for (unsigned i = 1; i < t.size(); ++i)
for (unsigned j = 0; j < i; ++j)
for (unsigned k = 0; k < j; ++k)
{
mesh.add_triangle(nodes[t[i]], nodes[t[j]], nodes[t[k]]);
}
// Set masses of nodes equal to 1/N where N is the number of nodes
// and the initial velocities to 0. Also, get the indexes of
// the nodes at positions (1,0,0) and (0,0,0)
for(auto it=mesh.node_begin(); it != mesh.node_end(); ++ it)
{
(*it).value().mass = total_mass/mesh.num_nodes();
(*it).value().velocity = Point(0.0,0.0,0.0);
}
// Set spring constants for each node equal to spring_const variable
// and set initial length values equal to lengths of edges prior to
// running the symplectic Euler steps
for(auto it=mesh.edge_begin(); it != mesh.edge_end(); ++ it)
{
(*it).value().spring_constant = spring_const;
(*it).value().initial_length = (*it).length();
}
// Set the triangle direction values so that we can determine which
// way to point normal vectors. This part assumes a convex shape
Point center = get_center(mesh);
for(auto it=mesh.triangle_begin(); it != mesh.triangle_end(); ++ it)
{
//std::cout << (*it).index() << std::endl;
set_normal_direction((*it),center);
}
// Print out the stats
std::cout << mesh.num_nodes() << " " << mesh.num_edges() << std::endl;
std::cout << "Center: " << get_center(mesh) << std::endl;
// Launch the SDLViewer
CS207::SDLViewer viewer;
auto node_map = viewer.empty_node_map(mesh);
viewer.launch();
viewer.add_nodes(mesh.node_begin(), mesh.node_end(), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
viewer.center_view();
// Begin the mass-spring simulation
double dt = 0.0001;
double t_start = 0;
double t_end = 20.0;
// Initialize constraints
PlaneConstraint c1;
//SelfCollisionConstraint c2;
//auto combined_constraints = make_combined_constraints(c1,c2);
for (double t = t_start; t < t_end; t += dt) {
MassSpringForce ms_force;
PressureForce p_force = PressureForce(0.0);
DampingForce d_force = DampingForce(mesh.num_nodes());
GravityForce g_force;
WindForce w_force;
(void) d_force; // prevents compiler from throwing error for unused variable
if (t >= t_addgas - dt) {
p_force.set_pressure(gas_const/get_volume(mesh));
if (t < t_addgas)
std::cout << "Adding gas to the ball now..." << std::endl;
}
auto combined_forces = make_combined_force(ms_force, p_force, w_force, g_force);
symp_euler_step(mesh, t, dt, combined_forces, c1);
// Update viewer with nodes' new positions
viewer.add_nodes(mesh.node_begin(), mesh.node_end(), node_map);
// update the viewer's label with the ball center's position on the z axis
viewer.set_label(get_center(mesh).z);
}
return 0;
}
int main(int argc, char* argv[])
{
// Check arguments
if (argc < 3) {
std::cerr << "Usage: shallow_water NODES_FILE TRIS_FILE\n";
exit(1);
}
MeshType mesh;
// HW4B: Need node_type before this can be used!
#if 1
std::vector<typename MeshType::node_type> mesh_node;
#endif
// Read all Points and add them to the Mesh
std::ifstream nodes_file(argv[1]);
Point p;
while (CS207::getline_parsed(nodes_file, p)) {
// HW4B: Need to implement add_node before this can be used!
#if 1
mesh_node.push_back(mesh.add_node(p));
#endif
}
// Read all mesh triangles and add them to the Mesh
std::ifstream tris_file(argv[2]);
std::array<int,3> t;
while (CS207::getline_parsed(tris_file, t)) {
// HW4B: Need to implement add_triangle before this can be used!
#if 1
mesh.add_triangle(mesh_node[t[0]], mesh_node[t[1]], mesh_node[t[2]]);
#endif
}
// Print out the stats
std::cout << mesh.num_nodes() << " "
<< mesh.num_edges() << " "
<< mesh.num_triangles() << std::endl;
// HW4B Initialization
// Set the initial conditions according the type of input pattern
if(argv[2][5]=='d'){
Dam<MeshType> init;
for(auto it= mesh.node_begin(); it != mesh.node_end(); ++it)
init(*it);
}
else if((argv[2][5]=='p')){
Pebble<MeshType> init;
for(auto it= mesh.node_begin(); it != mesh.node_end(); ++it)
init(*it);
}
else{
Wave<MeshType> init;
for(auto it= mesh.node_begin(); it != mesh.node_end(); ++it)
init(*it);
}
// Set triangle values
for (auto it=mesh.triangle_begin(); it!=mesh.triangle_end(); ++it) {
(*it).value().Q = QVar(0.0,0.0,0.0);
(*it).value().Q += (*it).node(0).value().Q;
(*it).value().Q += (*it).node(1).value().Q;
(*it).value().Q += (*it).node(2).value().Q;
(*it).value().Q /= 3.0;
}
// Launch the SDLViewer
CS207::SDLViewer viewer;
viewer.launch();
// HW4B: Need to define Mesh::node_type and node/edge iterator
// before these can be used!
#if 1
auto node_map = viewer.empty_node_map(mesh);
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
CS207::DefaultColor(), NodePosition(), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
#endif
viewer.center_view();
// HW4B: Timestep
// CFL stability condition requires dt <= dx / max|velocity|
// For the shallow water equations with u = v = 0 initial conditions
// we can compute the minimum edge length and maximum original water height
// to set the time-step
// Compute the minimum edge length and maximum water height for computing dt
double min_edge_length =( *mesh.edge_begin()).length();
for (auto it=mesh.edge_begin(); it!=mesh.edge_end(); ++it) {
if ((*it).length() < min_edge_length) {
min_edge_length = (*it).length();
}
}
double max_height = 0.0;
for (auto it=mesh.node_begin(); it!=mesh.node_end(); ++it) {
if ((*it).value().Q.h > max_height) {
max_height = (*it).value().Q.h;
}
}
#if 1
double dt = 0.25 * min_edge_length / (sqrt(grav * max_height));
#else
// Placeholder!! Delete me when min_edge_length and max_height can be computed!
double dt = 0.1;
#endif
double t_start = 0;
double t_end = 10;
// Preconstruct a Flux functor
EdgeFluxCalculator f;
// Begin the time stepping
for (double t = t_start; t < t_end; t += dt) {
//print(mesh, t);
// Step forward in time with forward Euler
hyperbolic_step(mesh, f, t, dt);
// Update node values with triangle-averaged values
post_process(mesh);
// Update the viewer with new node positions
// HW4B: Need to define node_iterators before these can be used!
#if 1
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
CS207::DefaultColor(), NodePosition(), node_map);
#endif
viewer.set_label(t);
// These lines slow down the animation for small meshes.
// Feel free to remove them or tweak the constants.
if (mesh.num_nodes() < 100)
CS207::sleep(0.05);
}
return 0;
}
int main(int argc, char* argv[]) {
// Check arguments
if (argc < 5) {
std::cerr << "Usage: final_project NODES_FILE TRIS_FILE ball.nodes ball.tris \n";
exit(1);
}
MeshType mesh;
std::vector<typename MeshType::node_type> mesh_node;
// Read all water Points and add them to the Mesh
std::ifstream nodes_file(argv[1]);
Point p;
uint water_nodes = 0;
while (CS207::getline_parsed(nodes_file, p)) {
mesh_node.push_back(mesh.add_node(p));
water_nodes++;
}
// Read all water mesh triangles and add them to the Mesh
std::ifstream tris_file(argv[2]);
std::array<int,3> t;
int water_tris = 0;
while (CS207::getline_parsed(tris_file, t)) {
mesh.add_triangle(mesh_node[t[0]], mesh_node[t[1]], mesh_node[t[2]]);
water_tris++;
}
uint water_edges = mesh.num_edges();
std::ifstream nodes_file2(argv[3]);
double radius = 1 * scale;
while (CS207::getline_parsed(nodes_file2, p)) {
p *= scale;
p.z += + start_height;
mesh_node.push_back(mesh.add_node(p));
}
// Read all ball mesh triangles and add them to the mesh
std::ifstream tris_file2(argv[4]);
while (CS207::getline_parsed(tris_file2, t)) {
mesh.add_triangle(mesh_node[t[0]+water_nodes], mesh_node[t[1]+water_nodes], mesh_node[t[2]+water_nodes]);
}
// Print out the stats
std::cout << mesh.num_nodes() << " "
<< mesh.num_edges() << " "
<< mesh.num_triangles() << std::endl;
/* Set the initial conditions */
// Set the initial values of the nodes and get the maximum height double
double max_h = 0;
double dx = 0;
double dy = 0;
auto init_cond = Still();
auto b_init_cond = Cone();
// Find the maximum height and apply initial conditions to nodes
for (auto it = mesh.node_begin(); it != mesh.node_end(); ++it) {
auto n = *it;
if (n.index() < water_nodes){
n.value().q = init_cond(n.position());
n.value().b = b_init_cond(n.position());
max_h = std::max(max_h, n.value().q.h);
}
else {
n.value().q = QVar(n.position().z, 0, 0);
n.value().mass = total_mass/(mesh.num_nodes() - water_nodes);
n.value().velocity = Point(0.0,0.0,0.0);
}
}
// Set the initial values of the triangles to the average of their nodes and finds S
// Set the triangle direction values so that we can determine which
// way to point normal vectors. This part assumes a convex shape
Point center = get_center(mesh);
for (auto it = mesh.triangle_begin(); it != mesh.triangle_end(); ++it) {
auto t = *it;
if (t.index() < water_tris){
t.value().q_bar = (t.node1().value().q +
t.node2().value().q +
t.node3().value().q) / 3.0;
t.value().q_bar2 = t.value().q_bar;
double b_avg = (t.node1().value().b +
t.node2().value().b +
t.node3().value().b) / 3.0;
// finds the max dx and dy to calculate Source
dx = std::max(dx, fabs(t.node1().position().x - t.node2().position().x));
dx = std::max(dx, fabs(t.node2().position().x - t.node3().position().x));
dx = std::max(dx, fabs(t.node3().position().x - t.node1().position().x));
dy = std::max(dy, fabs(t.node1().position().y - t.node2().position().y));
dy = std::max(dy, fabs(t.node2().position().y - t.node3().position().y));
dy = std::max(dy, fabs(t.node3().position().y - t.node1().position().y));
t.value().S = QVar(0, -grav * t.value().q_bar.h * b_avg / dx, -grav * t.value().q_bar.h * b_avg / dy);
}
else
set_normal_direction((*it),center);
}
// Calculate the minimum edge length and set edge inital condititons
double min_edge_length = std::numeric_limits<double>::max();
uint count = 0;
for (auto it = mesh.edge_begin(); it != mesh.edge_end(); ++it, count++){
if (count < water_edges)
min_edge_length = std::min(min_edge_length, (*it).length());
else {
(*it).value().spring_constant = spring_const;
(*it).value().initial_length = (*it).length();
}
}
// Launch the SDLViewer
CS207::SDLViewer viewer;
viewer.launch();
auto node_map = viewer.empty_node_map(mesh);
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
Color(water_nodes), NodePosition(), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
// adds solid color-slows down program significantly
//viewer.add_triangles(mesh.triangle_begin(), mesh.triangle_end(), node_map);
viewer.center_view();
// CFL stability condition requires dt <= dx / max|velocity|
// For the shallow water equations with u = v = 0 initial conditions
// we can compute the minimum edge length and maximum original water height
// to set the time-step
// Compute the minimum edge length and maximum water height for computing dt
double dt = 0.25 * min_edge_length / (sqrt(grav * max_h));
double t_start = 0;
double t_end = 10;
Point ball_loc = Point(0,0,0);
double dh = 0;
// double pressure = gas_const/(4/3*M_PI*radius*radius*radius);
// add listener
my_listener* l = new my_listener(viewer,mesh,dt);
viewer.add_listener(l);
// Preconstruct a Flux functor
EdgeFluxCalculator f;
// defines the constraint
PlaneConstraint c = PlaneConstraint(plane_const);
// Begin the time stepping
for (double t = t_start; t < t_end; t += dt) {
// define forces on ball
GravityForce g_force;
BuoyantForce b_force = BuoyantForce(dh, ball_loc.z);
WindForce w_force;
MassSpringForce ms_force;
// PressureForce p_force = PressureForce(pressure);
// DampingForce d_force = DampingForce(mesh.num_nodes());
auto combined_forces = make_combined_force(g_force, b_force, w_force, ms_force);
// Step forward in time with forward Euler
hyperbolic_step(mesh, f, t, dt, ball_loc, water_tris);
// Update node values with triangle-averaged values
ball_loc = post_process(mesh, combined_forces, c, t, dt, water_nodes);
// Update the viewer with new node positions
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
Color(water_nodes), NodePosition(), node_map);
// viewer.add_triangles(mesh.triangle_begin(), mesh.triangle_end(), node_map);
viewer.set_label(t);
// find radius of cross sectional radius of ball submerged
dh = ball_loc.z;
if (dh > 2*radius)
dh = 2 * radius;
ball_loc.z = cross_radius(radius, dh);
// These lines slow down the animation for small meshes.
if (mesh.num_nodes() < 100)
CS207::sleep(0.05);
}
return 0;
}
int main(int argc, char* argv[])
{
// Check arguments
if (argc < 3) {
std::cerr << "Usage: shallow_water NODES_FILE TRIS_FILE\n";
exit(1);
}
auto start = std::chrono::high_resolution_clock::now();
MeshType mesh;
// HW4B: Need node_type before this can be used!
std::vector<typename MeshType::node_type> mesh_node;
// Read all Points and add them to the Mesh
std::ifstream nodes_file(argv[1]);
Point p;
while (CS207::getline_parsed(nodes_file, p)) {
mesh_node.push_back(mesh.add_node(p));
}
// Read all mesh triangles and add them to the Mesh
std::ifstream tris_file(argv[2]);
std::array<int,3> t;
while (CS207::getline_parsed(tris_file, t)) {
// HW4B: Need to implement add_triangle before this can be used!
mesh.add_triangle(mesh_node[t[0]], mesh_node[t[1]], mesh_node[t[2]]);
}
// Print out the stats
std::cout << mesh.num_nodes() << " "
<< mesh.num_edges() << " "
<< mesh.num_triangles() << std::endl;
//Start of nearest neighor. Put all positions that you want inspected in a vector of type double
std::vector<double> pos;
for (auto it = mesh.node_begin(); it != mesh.node_end(); ++it )
pos.push_back((*it).position().z);
unsigned num_neighbors = 10; //num of neighors to return
unsigned object_idx = 5; // do this if you want to examine the neighbors of a specific idx
MeshType::NearestNeighbor a = mesh.calculateNearestNeighbors(num_neighbors ,pos);
auto idx = mesh.getNeighbors(a,object_idx);
auto dist = mesh.getNeighborDistances(a,object_idx);
/*auto all_n = mesh.getAllNeighbors(a);
auto all_d = mesh.getAllNeighborDistances(a);*/
for (unsigned i = 0; i < idx.size(); ++i)
std::cout << "Node " << object_idx << "'s " << i << " neighbor is: node " << idx[i] << " with distance of " << dist[i] << endl;
/*//Uncomment to view results for all nodes
for (unsigned j = 0; j < pos.size(); ++j){
std::cout << endl;
for (unsigned i = 0; i < num_neighbors; ++i)
std::cout << "For node " << j << " neighbor " << i << " is index " << all_n[i+j*num_neighbors] << " and distance is " << all_d[i+j*num_neighbors] << endl;
}*/
// HW4B Initialization
// Set the initial conditions
int wave = 0, peddle=0, dam=1;
if (wave){
for ( auto it = mesh.node_begin(); it!= mesh.node_end(); ++it){
auto x = (*it).position().x;
auto y = (*it).position().y;
double h = 1-0.75 * exp(-80 * ( (x-0.75)*(x-0.75) + y*y ));
mesh.value((*it),QVar( h,0,0));
}
}
else if (peddle){
for ( auto it = mesh.node_begin(); it!= mesh.node_end(); ++it){
auto x = (*it).position().x;
auto y = (*it).position().y;
double h = (x-0.75)*(x-0.75) + y*y -0.15*0.15 ;
int H =0;
if (h < 0)
H = 1;
mesh.value((*it), QVar(1+0.75*H,0,0));
}
}
else if (dam){
for ( auto it = mesh.node_begin(); it!= mesh.node_end(); ++it){
auto x = (*it).position().x;
int H =0;
if (x < 0)
H = 1;
mesh.value((*it), QVar(1+0.75*H,0,0));
}
}
// Perform any needed precomputation
// initialize triangle
for (auto it = mesh.tri_begin(); it != mesh.tri_end(); ++it ) {
(*it).value() = ((*it).node1().value() + (*it).node2().value() + (*it).node3().value())/3.0;
}
// Launch the SDLViewer
CS207::SDLViewer viewer;
viewer.launch();
// HW4B: Need to define Mesh::node_type and node/edge iterator
// before these can be used!
auto node_map = viewer.empty_node_map(mesh);
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
CS207::DefaultColor(), NodePosition(), node_map);
viewer.add_edges(mesh.edge_begin(), mesh.edge_end(), node_map);
viewer.center_view();
// HW4B: Timestep
// CFL stability condition requires dt <= dx / max|velocity|
// For the shallow water equations with u = v = 0 initial conditions
// we can compute the minimum edge length and maximum original water height
// to set the time-step
// Compute the minimum edge length and maximum water height for computing dt
auto min_length = *std::min_element(mesh.edge_begin(), mesh.edge_end(), EdgeComparator);
auto max_h = *std::max_element(mesh.node_begin(), mesh.node_end(), HeightComparator);
double dt = 0.25 * min_length.length() / (sqrt(grav * max_h.value().h));
double t_start = 0;
double t_end = 0.1;
// Preconstruct a Flux functor
EdgeFluxCalculator f;
// Begin the time stepping
for (double t = t_start; t < t_end; t += dt) {
// Step forward in time with forward Euler
hyperbolic_step(mesh, f, t, dt);
// Update node values with triangle-averaged values
post_process(mesh);
// Update the viewer with new node positions
// HW4B: Need to define node_iterators before these can be used!
viewer.add_nodes(mesh.node_begin(), mesh.node_end(),
CS207::DefaultColor(), NodePosition(), node_map);
viewer.set_label(t);
// These lines slow down the animation for small meshes.
// Feel free to remove them or tweak the constants.
if (mesh.num_nodes() < 100)
CS207::sleep(0.05);
}
auto elapsed = std::chrono::high_resolution_clock::now() - start;
long long microseconds = std::chrono::duration_cast<std::chrono::microseconds>(elapsed).count();
cout << microseconds << endl;
return 0;
}