Ejemplo n.º 1
0
int AsyncUDPSocket::connect(const folly::SocketAddress& address) {
  CHECK_NE(-1, fd_) << "Socket not yet bound";
  sockaddr_storage addrStorage;
  address.getAddress(&addrStorage);
  return fsp::connect(
      fd_, reinterpret_cast<sockaddr*>(&addrStorage), address.getActualSize());
}
Ejemplo n.º 2
0
ssize_t AsyncUDPSocket::writev(const folly::SocketAddress& address,
                               const struct iovec* vec, size_t iovec_len) {
  CHECK_NE(-1, fd_) << "Socket not yet bound";

  sockaddr_storage addrStorage;
  address.getAddress(&addrStorage);

  struct msghdr msg;
  msg.msg_name = reinterpret_cast<void*>(&addrStorage);
  msg.msg_namelen = address.getActualSize();
  msg.msg_iov = const_cast<struct iovec*>(vec);
  msg.msg_iovlen = iovec_len;
  msg.msg_control = nullptr;
  msg.msg_controllen = 0;
  msg.msg_flags = 0;

  return ::sendmsg(fd_, &msg, 0);
}
Ejemplo n.º 3
0
ssize_t AsyncUDPSocket::writev(
    const folly::SocketAddress& address,
    const struct iovec* vec,
    size_t iovec_len,
    int gso) {
  CHECK_NE(-1, fd_) << "Socket not yet bound";

  sockaddr_storage addrStorage;
  address.getAddress(&addrStorage);

  struct msghdr msg;
  msg.msg_name = reinterpret_cast<void*>(&addrStorage);
  msg.msg_namelen = address.getActualSize();
  msg.msg_iov = const_cast<struct iovec*>(vec);
  msg.msg_iovlen = iovec_len;
  msg.msg_control = nullptr;
  msg.msg_controllen = 0;
  msg.msg_flags = 0;

#ifdef FOLLY_HAVE_MSG_ERRQUEUE
  if (gso > 0) {
    char control[CMSG_SPACE(sizeof(uint16_t))];
    msg.msg_control = control;
    msg.msg_controllen = sizeof(control);

    struct cmsghdr* cm = CMSG_FIRSTHDR(&msg);
    cm->cmsg_level = SOL_UDP;
    cm->cmsg_type = UDP_SEGMENT;
    cm->cmsg_len = CMSG_LEN(sizeof(uint16_t));
    uint16_t gso_len = static_cast<uint16_t>(gso);
    memcpy(CMSG_DATA(cm), &gso_len, sizeof(gso_len));

    return sendmsg(fd_, &msg, 0);
  }
#else
  CHECK_LT(gso, 1) << "GSO not supported";
#endif

  return sendmsg(fd_, &msg, 0);
}
Ejemplo n.º 4
0
void AsyncUDPSocket::bind(const folly::SocketAddress& address) {
  int socket = fsp::socket(address.getFamily(), SOCK_DGRAM, IPPROTO_UDP);
  if (socket == -1) {
    throw AsyncSocketException(
        AsyncSocketException::NOT_OPEN,
        "error creating async udp socket",
        errno);
  }

  auto g = folly::makeGuard([&] { ::close(socket); });

  // put the socket in non-blocking mode
  int ret = fcntl(socket, F_SETFL, O_NONBLOCK);
  if (ret != 0) {
    throw AsyncSocketException(
        AsyncSocketException::NOT_OPEN,
        "failed to put socket in non-blocking mode",
        errno);
  }

  if (reuseAddr_) {
    // put the socket in reuse mode
    int value = 1;
    if (setsockopt(socket, SOL_SOCKET, SO_REUSEADDR, &value, sizeof(value)) !=
        0) {
      throw AsyncSocketException(
          AsyncSocketException::NOT_OPEN,
          "failed to put socket in reuse mode",
          errno);
    }
  }

  if (reusePort_) {
    // put the socket in port reuse mode
    int value = 1;
    if (setsockopt(socket, SOL_SOCKET, SO_REUSEPORT, &value, sizeof(value)) !=
        0) {
      throw AsyncSocketException(
          AsyncSocketException::NOT_OPEN,
          "failed to put socket in reuse_port mode",
          errno);
    }
  }

  if (busyPollUs_ > 0) {
#ifdef SO_BUSY_POLL
    // Set busy_poll time in microseconds on the socket.
    // It sets how long socket will be in busy_poll mode when no event occurs.
    int value = busyPollUs_;
    if (setsockopt(socket, SOL_SOCKET, SO_BUSY_POLL, &value, sizeof(value)) !=
        0) {
      throw AsyncSocketException(
          AsyncSocketException::NOT_OPEN,
          "failed to set SO_BUSY_POLL on the socket",
          errno);
    }
#else /* SO_BUSY_POLL is not supported*/
    throw AsyncSocketException(
        AsyncSocketException::NOT_OPEN, "SO_BUSY_POLL is not supported", errno);
#endif
  }

  if (rcvBuf_ > 0) {
    // Set the size of the buffer for the received messages in rx_queues.
    int value = rcvBuf_;
    if (setsockopt(socket, SOL_SOCKET, SO_RCVBUF, &value, sizeof(value)) != 0) {
      throw AsyncSocketException(
          AsyncSocketException::NOT_OPEN,
          "failed to set SO_RCVBUF on the socket",
          errno);
    }
  }

  if (sndBuf_ > 0) {
    // Set the size of the buffer for the sent messages in tx_queues.
    int value = rcvBuf_;
    if (setsockopt(socket, SOL_SOCKET, SO_SNDBUF, &value, sizeof(value)) != 0) {
      throw AsyncSocketException(
          AsyncSocketException::NOT_OPEN,
          "failed to set SO_SNDBUF on the socket",
          errno);
    }
  }

  // If we're using IPv6, make sure we don't accept V4-mapped connections
  if (address.getFamily() == AF_INET6) {
    int flag = 1;
    if (setsockopt(socket, IPPROTO_IPV6, IPV6_V6ONLY, &flag, sizeof(flag))) {
      throw AsyncSocketException(
          AsyncSocketException::NOT_OPEN, "Failed to set IPV6_V6ONLY", errno);
    }
  }

  // bind to the address
  sockaddr_storage addrStorage;
  address.getAddress(&addrStorage);
  sockaddr* saddr = reinterpret_cast<sockaddr*>(&addrStorage);
  if (fsp::bind(socket, saddr, address.getActualSize()) != 0) {
    throw AsyncSocketException(
        AsyncSocketException::NOT_OPEN,
        "failed to bind the async udp socket for:" + address.describe(),
        errno);
  }

  // success
  g.dismiss();
  fd_ = socket;
  ownership_ = FDOwnership::OWNS;

  // attach to EventHandler
  EventHandler::changeHandlerFD(fd_);

  if (address.getPort() != 0) {
    localAddress_ = address;
  } else {
    localAddress_.setFromLocalAddress(fd_);
  }
}
Ejemplo n.º 5
0
void AsyncUDPSocket::bind(const folly::SocketAddress& address) {
  int socket = fsp::socket(address.getFamily(), SOCK_DGRAM, IPPROTO_UDP);
  if (socket == -1) {
    throw AsyncSocketException(AsyncSocketException::NOT_OPEN,
                              "error creating async udp socket",
                              errno);
  }

  auto g = folly::makeGuard([&] { ::close(socket); });

  // put the socket in non-blocking mode
  int ret = fcntl(socket, F_SETFL, O_NONBLOCK);
  if (ret != 0) {
    throw AsyncSocketException(AsyncSocketException::NOT_OPEN,
                              "failed to put socket in non-blocking mode",
                              errno);
  }

  if (reuseAddr_) {
    // put the socket in reuse mode
    int value = 1;
    if (setsockopt(socket,
                  SOL_SOCKET,
                  SO_REUSEADDR,
                  &value,
                  sizeof(value)) != 0) {
      throw AsyncSocketException(AsyncSocketException::NOT_OPEN,
                                "failed to put socket in reuse mode",
                                errno);
    }
  }

  if (reusePort_) {
    // put the socket in port reuse mode
    int value = 1;
    if (setsockopt(socket,
                   SOL_SOCKET,
                   SO_REUSEPORT,
                   &value,
                   sizeof(value)) != 0) {
      throw AsyncSocketException(AsyncSocketException::NOT_OPEN,
                                "failed to put socket in reuse_port mode",
                                errno);

    }
  }

  // If we're using IPv6, make sure we don't accept V4-mapped connections
  if (address.getFamily() == AF_INET6) {
    int flag = 1;
    if (setsockopt(socket, IPPROTO_IPV6, IPV6_V6ONLY, &flag, sizeof(flag))) {
      throw AsyncSocketException(
        AsyncSocketException::NOT_OPEN,
        "Failed to set IPV6_V6ONLY",
        errno);
    }
  }

  // bind to the address
  sockaddr_storage addrStorage;
  address.getAddress(&addrStorage);
  sockaddr* saddr = reinterpret_cast<sockaddr*>(&addrStorage);
  if (fsp::bind(socket, saddr, address.getActualSize()) != 0) {
    throw AsyncSocketException(
        AsyncSocketException::NOT_OPEN,
        "failed to bind the async udp socket for:" + address.describe(),
        errno);
  }

  // success
  g.dismiss();
  fd_ = socket;
  ownership_ = FDOwnership::OWNS;

  // attach to EventHandler
  EventHandler::changeHandlerFD(fd_);

  if (address.getPort() != 0) {
    localAddress_ = address;
  } else {
    localAddress_.setFromLocalAddress(fd_);
  }
}