bool KABCPersistence::syncWithKABC( MetaContact * mc )
{
kDebug(14010) ;
bool contactAdded = false;
// check whether the dontShowAgain was checked
KABC::AddressBook* ab = addressBook();
KABC::Addressee addr = ab->findByUid( mc->kabcId() );
if ( !addr.isEmpty() ) // if we are associated with KABC
{
// load the set of addresses from KABC
const QStringList customs = addr.customs();
QStringList::ConstIterator it;
for ( it = customs.constBegin(); it != customs.constEnd(); ++it )
{
QString app, name, value;
splitField( *it, app, name, value );
kDebug( 14010 ) << "app=" << app << " name=" << name << " value=" << value;
if ( app.startsWith( QLatin1String( "messaging/" ) ) )
{
if ( name == QLatin1String( "All" ) )
{
kDebug( 14010 ) << " syncing \"" << app << ":" << name << " with contact list ";
// Get the protocol name from the custom field
// by chopping the 'messaging/' prefix from the custom field app name
QString protocolName = app.right( app.length() - 10 );
// munge Jabber hack
if ( protocolName == QLatin1String( "xmpp" ) )
protocolName = QLatin1String( "jabber" );
// Check Kopete supports it
Protocol * proto = dynamic_cast<Protocol*>( PluginManager::self()->loadPlugin( QLatin1String( "kopete_" ) + protocolName ) );
if ( !proto )
{
KMessageBox::queuedMessageBox( Kopete::UI::Global::mainWidget(), KMessageBox::Sorry,
i18n( "<qt>\"%1\" is not supported by Kopete.</qt>", protocolName ),
i18n( "Could Not Sync with KDE Address Book" ) );
continue;
}
// See if we need to add each contact in this protocol
QStringList addresses = value.split( QChar( 0xE000 ), QString::SkipEmptyParts );
QStringList::iterator end = addresses.end();
for ( QStringList::iterator it = addresses.begin(); it != end; ++it )
{
// check whether each one is present in Kopete
// Is it in the contact list?
// First discard anything after an 0xE120, this is used by IRC to separate nick and server group name, but
// IRC doesn't support this properly yet, so the user will have to select an appropriate account manually
int separatorPos = (*it).indexOf( QChar( 0xE120 ) );
if ( separatorPos != -1 )
*it = (*it).left( separatorPos );
Kopete::MetaContact *otherMc = 0;
foreach( Kopete::Account *act, Kopete::AccountManager::self()->accounts() )
{
if( act->protocol() != proto )
continue;
Kopete::Contact *c= act->contacts().value(*it);
if(c)
{
otherMc=c->metaContact();
break;
}
}
if ( otherMc ) // Is it in another metacontact?
{
// Is it already in this metacontact? If so, we needn't do anything
if ( otherMc == mc )
{
kDebug( 14010 ) << *it << " already a child of this metacontact.";
continue;
}
kDebug( 14010 ) << *it << " already exists in OTHER metacontact, move here?";
// find the Kopete::Contact and attempt to move it to this metacontact.
otherMc->findContact( proto->pluginId(), QString(), *it )->setMetaContact( mc );
}
else
{
// if not, prompt to add it
kDebug( 14010 ) << proto->pluginId() << "://" << *it << " was not found in the contact list. Prompting to add...";
if ( KMessageBox::Yes == KMessageBox::questionYesNo( Kopete::UI::Global::mainWidget(),
i18n( "<qt>An address was added to this contact by another application.<br />Would you like to use it in Kopete?<br /><b>Protocol:</b> %1<br /><b>Address:</b> %2</qt>", proto->displayName(), *it ), i18n( "Import Address From Address Book" ), KGuiItem( i18n("Use") ), KGuiItem( i18n("Do Not Use") ), QLatin1String( "ImportFromKABC" ) ) )
{
// Check the accounts for this protocol are all connected
// Most protocols do not allow you to add contacts while offline
// Would be better to have a virtual bool Kopete::Account::readyToAddContact()
int accountcount=0;
bool allAccountsConnected = true;
Kopete::Account *chosen = 0;
foreach( Kopete::Account *act, Kopete::AccountManager::self()->accounts() )
{
if( act->protocol() == proto)
{
accountcount++;
if(!act->isConnected())
{
allAccountsConnected=false;
break;
}
chosen=act;
}
}
if ( !allAccountsConnected )
{
KMessageBox::queuedMessageBox( Kopete::UI::Global::mainWidget(), KMessageBox::Sorry,
i18n( "<qt>One or more of your accounts using %1 are offline. Most systems have to be connected to add contacts. Please connect these accounts and try again.</qt>", protocolName ),
i18n( "Not Connected" ) );
continue;
}
// we have got a contact to add, our accounts are connected, so add it.
// Do we need to choose an account
if ( accountcount > 1 )
{ // if we have >1 account in this protocol, prompt for the protocol.
KDialog *chooser = new KDialog(0);
chooser->setCaption( i18n("Choose Account") );
chooser->setButtons( KDialog::Ok | KDialog::Cancel );
AccountSelector *accSelector = new AccountSelector(proto, chooser);
accSelector->setObjectName( QLatin1String("accSelector") );
chooser->setMainWidget(accSelector);
if ( chooser->exec() == QDialog::Rejected )
continue;
chosen = accSelector->selectedItem();
delete chooser;
}
else if ( accountcount == 0 )
{
KMessageBox::queuedMessageBox( Kopete::UI::Global::mainWidget(), KMessageBox::Sorry,
i18n( "<qt>You do not have an account configured for <b>%1</b> yet. Please create an account, connect it, and try again.</qt>", protocolName ),
i18n( "No Account Found" ) );
continue;
}
// add the contact to the chosen account
if ( chosen )
{
kDebug( 14010 ) << "Adding " << *it << " to " << chosen->accountId();
if ( chosen->addContact( *it, mc ) )
contactAdded = true;
else
KMessageBox::queuedMessageBox( Kopete::UI::Global::mainWidget(), KMessageBox::Sorry,
i18n( "<qt>It was not possible to add the contact.</qt>" ),
i18n( "Could Not Add Contact") ) ;
}
}
else
kDebug( 14010 ) << " user declined to add " << *it << " to contact list ";
}
}
kDebug( 14010 ) << " all " << addresses.count() << " contacts in " << proto->pluginId() << " checked ";
}
else
void CustomFieldsEditWidget::loadContact( const KABC::Addressee &contact )
{
CustomField::List externalCustomFields;
CustomField::List globalCustomFields = CustomFieldManager::globalCustomFieldDescriptions();
const QStringList customs = contact.customs();
foreach ( const QString &custom, customs ) {
QString app, name, value;
splitCustomField( custom, app, name, value );
// skip all well-known fields that have separated editor widgets
if ( custom.startsWith( QLatin1String( "messaging/" ) ) ) { // IM addresses
continue;
}
if ( app == QLatin1String( "KADDRESSBOOK" ) ) {
static QSet<QString> blacklist;
if ( blacklist.isEmpty() ) {
blacklist << QLatin1String( "BlogFeed" )
<< QLatin1String( "X-IMAddress" )
<< QLatin1String( "X-Profession" )
<< QLatin1String( "X-Office" )
<< QLatin1String( "X-ManagersName" )
<< QLatin1String( "X-AssistantsName" )
<< QLatin1String( "X-Anniversary" )
<< QLatin1String( "X-ANNIVERSARY" )
<< QLatin1String( "X-SpousesName" )
<< QLatin1String( "X-Profession" )
<< QLatin1String( "MailPreferedFormatting")
<< QLatin1String( "MailAllowToRemoteContent")
<< QLatin1String( "CRYPTOPROTOPREF" )
<< QLatin1String( "OPENPGPFP" )
<< QLatin1String( "SMIMEFP" )
<< QLatin1String( "CRYPTOSIGNPREF" )
<< QLatin1String( "CRYPTOENCRYPTPREF" );
}
if ( blacklist.contains( name ) ) { // several KAddressBook specific fields
continue;
}
}
// check whether it correspond to a local custom field
bool isLocalCustomField = false;
for ( int i = 0; i < mLocalCustomFields.count(); ++i ) {
if ( mLocalCustomFields[ i ].key() == name ) {
mLocalCustomFields[ i ].setValue( value );
isLocalCustomField = true;
break;
}
}
// check whether it correspond to a global custom field
bool isGlobalCustomField = false;
for ( int i = 0; i < globalCustomFields.count(); ++i ) {
if ( globalCustomFields[ i ].key() == name ) {
globalCustomFields[ i ].setValue( value );
isGlobalCustomField = true;
break;
}
}
// if not local and not global it must be external
if ( !isLocalCustomField && !isGlobalCustomField ) {
if ( app == QLatin1String( "KADDRESSBOOK" ) ) {
// however if it starts with our prefix it might be that this is an outdated
// global custom field, in this case treat it as local field of type text
CustomField customField( name, name, CustomField::TextType, CustomField::LocalScope );
customField.setValue( value );
mLocalCustomFields << customField;
} else {
// it is really an external custom field
const QString key = app + QLatin1Char( '-' ) + name;
CustomField customField( key, key, CustomField::TextType, CustomField::ExternalScope );
customField.setValue( value );
externalCustomFields << customField;
}
}
}