Ejemplo n.º 1
0
SvnHelper::SvnHelper():KApplication() {
	KCmdLineArgs *args = KCmdLineArgs::parsedArgs();
#ifdef Q_WS_X11
	m_id=KWindowSystem::activeWindow();
	KWindowSystem::activateWindow(m_id);
#else
	m_id = 0;
#endif

	KUrl::List list;
	for ( int i = 0 ; i < args->count() ; i++ )
		list << args->url(i);

	if (args->isSet("u")) {
		kDebug(7128) << "update " << list;
		const KUrl servURL("svn+http://this_is_a_fake_URL_and_this_is_normal/");
		//FIXME when 1.2 is out (move the loop inside kio_svn's ::update)
		for ( QList<KUrl>::const_iterator it = list.constBegin(); it != list.constEnd() ; ++it ) {
			QByteArray parms;
			QDataStream s( &parms, QIODevice::WriteOnly );
			int cmd = 2;
			int rev = -1;
			kDebug(7128) << "updating : " << (*it).prettyUrl();
			s << cmd << *it << rev << QString( "HEAD" );
			KIO::SimpleJob * job = KIO::special(servURL, parms);
			connect( job, SIGNAL( result( KJob * ) ), this, SLOT( slotResult( KJob * ) ) );
			KIO::NetAccess::synchronousRun( job, 0 );
		}
	} else if (args->isSet("c")) {
void GalleryWindow::slotAddPhoto()
{
    QTreeWidgetItem* item = d->albumView->currentItem();
    int column            = d->albumView->currentColumn();
    if (!item)
        return;     // NO album selected: FIXME: do something

    // albumName
    QString albumTitle = item->text(column);
    if(!d->albumDict.contains(albumTitle))
        return;     // NO album name found: FIXME: do something

    // photoPath
    KUrl::List urls = KPImageDialog::getImageUrls(this, m_interface);
    if (urls.isEmpty())
        return; // NO photo selected: FIXME: do something

    for (KUrl::List::ConstIterator it = urls.constBegin(); it != urls.constEnd(); ++it)
    {
        mpUploadList->append( (*it).path() );
    }

    m_uploadTotal = mpUploadList->count();
    m_progressDlg->reset();
    m_progressDlg->setMaximum(m_uploadTotal);
    m_uploadCount = 0;
    slotAddPhotoNext();
}
void KonqSidebarTree::contentsDropEvent( QDropEvent *ev )
{
    if (d->m_dropMode == SidebarTreeMode) {
        m_autoOpenTimer->stop();

        if ( !selectedItem() )
        {
            //        KonqOperations::doDrop( 0L, m_dirtreeDir.dir, ev, this );
            KUrl::List urls;
            if ( K3URLDrag::decode( ev, urls ) )
            {
                for(KUrl::List::ConstIterator it = urls.constBegin();
                        it != urls.constEnd(); ++it)
                {
                    addUrl(0, *it);
                }
            }
        }
        else
        {
            KonqSidebarTreeItem *selection = static_cast<KonqSidebarTreeItem *>( selectedItem() );
            selection->drop( ev );
        }
    } else {
        K3ListView::contentsDropEvent(ev);
    }
}
Ejemplo n.º 4
0
/** Replaces the ImagesList::slotAddImages method, so that
  * MyImageListViewItems can be added instead of ImagesListViewItems
  */
void MyImageList::slotAddImages(const KUrl::List& list)
{
    // Figure out which of the supplied URL's should actually be added and which
    // of them already exist.
    bool found = false;

    for (KUrl::List::ConstIterator it = list.constBegin(); it != list.constEnd(); ++it)
    {
        KUrl imageUrl = *it;
        found         = false;

        for (int i = 0; i < listView()->topLevelItemCount(); ++i)
        {
            MyImageListViewItem* const currItem = dynamic_cast<MyImageListViewItem*>(listView()->topLevelItem(i));

            if (currItem && currItem->url() == imageUrl)
            {
                found = true;
                break;
            }
        }

        if (!found && KPMetadata::isRawFile(imageUrl))
        {
            new MyImageListViewItem(listView(), imageUrl);
        }
    }

    // Duplicate the signalImageListChanged of the ImageWindow, to enable the
    // upload button again.
    emit signalImageListChanged();
}
Ejemplo n.º 5
0
void UploadDialog::imagesFilesButtonAdd()
{
    QStringList fileList;
    KUrl::List urls;

#if KIPI_PLUGIN
    urls = KPImageDialog::getImageUrls(this);
#else
    const QString filter      = QString( "*.jpg *.jpeg *.jpe *.tiff *.gif *.png *.bmp|" + i18n("Image files") );
    QPointer<KFileDialog> dlg = new KFileDialog( QString(), filter, this );
//    QPointer<KFileDialog> dlg = new KFileDialog( QString::null, filter, this, "addImagesDlg", true );
    dlg->setCaption( i18n("Add Images") );
    dlg->setMode( KFile::Files | KFile::Directory );
    dlg->exec();
    urls = dlg->selectedUrls();
    delete dlg;
#endif

    if ( urls.isEmpty() ) return;

    for( KUrl::List::ConstIterator it = urls.constBegin() ; it != urls.constEnd() ; ++it )
        fileList << (*it).path();

    addDropItems( fileList );
}
Ejemplo n.º 6
0
void KipiInterface::addSelectedAlbums(const KUrl::List& albums)
{
    for (KUrl::List::const_iterator it = albums.constBegin(); it!=albums.constEnd(); ++it)
    {
        addSelectedAlbum(*it);
    }
}
Ejemplo n.º 7
0
KURL::List K3b::convertToLocalUrls( const KURL::List& urls )
{
  KURL::List r;
  for( KURL::List::const_iterator it = urls.constBegin(); it != urls.constEnd(); ++it )
    r.append( convertToLocalUrl( *it ) );
  return r;
}
Ejemplo n.º 8
0
//-----------------------------------------------------------------------------
void SplashInstaller::slotFilesDropped(const KUrl::List &urls)
{
  for(KUrl::List::ConstIterator it = urls.constBegin();
      it != urls.end();
      ++it)
      addNewTheme(*it);
}
Ejemplo n.º 9
0
void SoundtrackDialog::addItems(const KUrl::List& fileList)
{
    if (fileList.isEmpty())
        return;

    KUrl::List Files = fileList;

    for (KUrl::List::ConstIterator it = Files.constBegin(); it != Files.constEnd(); ++it)
    {
        KUrl currentFile             = *it;
        KUrl path                    = KUrl(currentFile.path().section('/', 0, -1));
        m_sharedData->soundtrackPath = path;
        SoundItem *item              = new SoundItem(m_SoundFilesListBox, path);
        item->setName(currentFile.path().section('/', -1));
        m_SoundFilesListBox->insertItem(m_SoundFilesListBox->count() - 1, item);

        m_soundItems->insert(path, item);

        connect(m_soundItems->value(path), SIGNAL(signalTotalTimeReady(const KUrl&, const QTime&)),
                this, SLOT(slotAddNewTime(const KUrl&, const QTime&)));

        m_urlList.append(path);
    }

    m_SoundFilesListBox->setCurrentItem(m_SoundFilesListBox->item(m_SoundFilesListBox->count() - 1)) ;

    slotSoundFilesSelected(m_SoundFilesListBox->currentRow());
    m_SoundFilesListBox->scrollToItem(m_SoundFilesListBox->currentItem());
    m_previewButton->setEnabled(true);
}
Ejemplo n.º 10
0
void KipiInterface::refreshImages(const KUrl::List& urls)
{
    kipiDebug(QString( "Plugin asks to refresh %1 images:").arg( urls.size() ));
    for (KUrl::List::ConstIterator it = urls.constBegin(); it!=urls.constEnd(); ++it)
    {
        kipiDebug("  " + (*it).url());
    }
}
Ejemplo n.º 11
0
void KNewFileMenuPrivate::executeStrategy()
{
    m_tempFileToDelete = m_copyData.tempFileToDelete();
    const QString src = m_copyData.sourceFileToCopy();
    QString chosenFileName = expandTilde(m_copyData.chosenFileName(), true);

    if (src.isEmpty())
        return;
    KUrl uSrc(src);
    if (uSrc.isLocalFile()) {
        // In case the templates/.source directory contains symlinks, resolve
        // them to the target files. Fixes bug #149628.
        KFileItem item(uSrc, QString(), KFileItem::Unknown);
        if (item.isLink())
            uSrc.setPath(item.linkDest());

        if (!m_copyData.m_isSymlink) {
            // If the file is not going to be detected as a desktop file, due to a
            // known extension (e.g. ".pl"), append ".desktop". #224142.
            QFile srcFile(uSrc.toLocalFile());
            if (srcFile.open(QIODevice::ReadOnly)) {
                KMimeType::Ptr wantedMime = KMimeType::findByUrl(uSrc);
                KMimeType::Ptr mime = KMimeType::findByNameAndContent(m_copyData.m_chosenFileName, srcFile.read(1024));
                //kDebug() << "mime=" << mime->name() << "wantedMime=" << wantedMime->name();
                if (!mime->is(wantedMime->name()))
                    chosenFileName += wantedMime->mainExtension();
            }
        }
    }

    // The template is not a desktop file [or it's a URL one]
    // Copy it.
    KUrl::List::const_iterator it = m_popupFiles.constBegin();
    for (; it != m_popupFiles.constEnd(); ++it)
    {
        KUrl dest(*it);
        dest.addPath(KIO::encodeFileName(chosenFileName));

        KUrl::List lstSrc;
        lstSrc.append(uSrc);
        KIO::Job* kjob;
        if (m_copyData.m_isSymlink) {
            kjob = KIO::symlink(src, dest);
            // This doesn't work, FileUndoManager registers new links in copyingLinkDone,
            // which KIO::symlink obviously doesn't emit... Needs code in FileUndoManager.
            //KIO::FileUndoManager::self()->recordJob(KIO::FileUndoManager::Link, lstSrc, dest, kjob);
        } else {
            //kDebug(1203) << "KIO::copyAs(" << uSrc.url() << "," << dest.url() << ")";
            KIO::CopyJob * job = KIO::copyAs(uSrc, dest);
            job->setDefaultPermissions(true);
            kjob = job;
            KIO::FileUndoManager::self()->recordJob(KIO::FileUndoManager::Copy, lstSrc, dest, job);
        }
        kjob->ui()->setWindow(m_parentWidget);
        QObject::connect(kjob, SIGNAL(result(KJob*)), q, SLOT(slotResult(KJob*)));
    }
}
Ejemplo n.º 12
0
void PlaylistWindow::slotAddLocation( bool directPlay ) //SLOT
{
    // open a file selector to add media to the playlist
    KURL::List files;
    //files = KFileDialog::getOpenURLs( QString::null, "*.*|" + i18n("All Files"), this, i18n("Add Media") );
    KFileDialog dlg(QString::null, "*.*|", this, "openMediaDialog", true);
    dlg.setCaption(directPlay ? i18n("Play Media (Files or URLs)") : i18n("Add Media (Files or URLs)"));
    dlg.setMode( KFile::Files | KFile::Directory );
    dlg.exec();
    files = dlg.selectedURLs();
    if( files.isEmpty() ) return;
    const int options = directPlay ? Playlist::Append | Playlist::DirectPlay : Playlist::Append;

    const KURL::List::ConstIterator end  = files.constEnd();

    for(  KURL::List::ConstIterator it = files.constBegin(); it != end; ++it )
        if( it == files.constBegin() )
            Playlist::instance()->insertMedia( *it, options );
        else
            Playlist::instance()->insertMedia( *it, Playlist::Append );
}
Ejemplo n.º 13
0
void DeleteWidget::setFiles(const KUrl::List &files)
{
    ddFileList->clear();
//    ddFileList->insertStringList(files);
    for( KUrl::List::ConstIterator it = files.constBegin(), end = files.constEnd(); it != end; ++it)
    {
        if( (*it).isLocalFile() ) //path is nil for non-local
            ddFileList->insertItem( (*it).path() );
        else
            ddFileList->insertItem( (*it).url() );
    }
    ddNumFiles->setText(i18np("<b>1</b> file selected.", "<b>%1</b> files selected.", files.count()));
}
void QGpgMECryptoConfigEntry::setURLValueList( const KUrl::List& urls )
{
  QStringList lst;
  for( KUrl::List::const_iterator it = urls.constBegin(); it != urls.constEnd(); ++it ) {
    lst << splitURL( mRealArgType, *it );
  }
  mValue = lst;
  if ( lst.isEmpty() && !isOptional() )
    mSet = false;
  else
    mSet = true;
  mDirty = true;
}
Ejemplo n.º 15
0
void ActionThread::processRawFiles(const KUrl::List& urlList)
{
    for (KUrl::List::const_iterator it = urlList.constBegin();
         it != urlList.constEnd(); ++it )
    {
        ActionThreadPriv::Task* t = new ActionThreadPriv::Task;
        t->fileUrl                = *it;
        t->action                 = PROCESS;

        QMutexLocker lock(&d->mutex);
        d->todo << t;
        d->condVar.wakeAll();
    }
}
Ejemplo n.º 16
0
void ActionThread::identifyRawFiles(const KUrl::List& urlList, bool full)
{
    for (KUrl::List::const_iterator it = urlList.constBegin();
         it != urlList.constEnd(); ++it )
    {
        ActionThreadPriv::Task* t = new ActionThreadPriv::Task;
        t->fileUrl                = *it;
        t->action                 = full ? IDENTIFY_FULL : IDENTIFY;

        QMutexLocker lock(&d->mutex);
        d->todo << t;
        d->condVar.wakeAll();
    }
}
void BatchProcessImagesDialog::slotImagesFilesButtonAdd()
{
    QStringList ImageFilesList;

    const KUrl::List urls = KPImageDialog::getImageUrls(this);

    if (urls.isEmpty())
        return;

    for (KUrl::List::ConstIterator it = urls.constBegin(); it != urls.constEnd(); ++it)
        ImageFilesList << (*it).path(); // PENDING(blackie) handle remote URLS

    slotAddDropItems(ImageFilesList);
}
Ejemplo n.º 18
0
//--------------------------------------------------------------------------
QString KMFolder::mailingListPostAddress() const
{
  if ( mMailingList.features() & MailingList::Post ) {
    KUrl::List::const_iterator it;
    KUrl::List post = mMailingList.postURLS();
    for( it = post.constBegin(); it != post.constEnd(); ++it ) {
      // We check for isEmpty because before 3.3 postAddress was just an
      // [email protected] and that leaves protocol() field in the kurl class
      if ( (*it).protocol() == "mailto" || (*it).protocol().isEmpty() )
        return (*it).path();
    }
  }
  return QString();
}
Ejemplo n.º 19
0
void KNewFileMenuPrivate::executeStrategy()
{
    m_tempFileToDelete = m_strategy.tempFileToDelete();
    const QString src = m_strategy.sourceFileToCopy();
    QString chosenFileName = expandTilde(m_strategy.chosenFileName(), true);

    if (src.isEmpty())
        return;
    KUrl uSrc(src);

    if (uSrc.isLocalFile()) {
        // In case the templates/.source directory contains symlinks, resolve
        // them to the target files. Fixes bug #149628.
        KFileItem item(uSrc, QString(), KFileItem::Unknown);
        if (item.isLink())
            uSrc.setPath(item.linkDest());
    }

    // The template is not a desktop file [or it's a URL one]
    // Copy it.
    KUrl::List::const_iterator it = m_popupFiles.constBegin();
    for (; it != m_popupFiles.constEnd(); ++it)
    {
        KUrl dest(*it);
        dest.addPath(KIO::encodeFileName(chosenFileName));

        KUrl::List lstSrc;
        lstSrc.append(uSrc);
        KIO::Job* kjob;
        if (m_strategy.m_isSymlink) {
            kjob = KIO::symlink(src, dest);
            // This doesn't work, FileUndoManager registers new links in copyingLinkDone,
            // which KIO::symlink obviously doesn't emit... Needs code in FileUndoManager.
            //KIO::FileUndoManager::self()->recordJob(KIO::FileUndoManager::Link, lstSrc, dest, kjob);
        } else {
            //kDebug(1203) << "KIO::copyAs(" << uSrc.url() << "," << dest.url() << ")";
            KIO::CopyJob * job = KIO::copyAs(uSrc, dest);
            job->setDefaultPermissions(true);
            kjob = job;
            KIO::FileUndoManager::self()->recordJob(KIO::FileUndoManager::Copy, lstSrc, dest, job);
        }
        kjob->ui()->setWindow(m_parentWidget);
        QObject::connect(kjob, SIGNAL(result(KJob*)), q, SLOT(slotResult(KJob*)));
    }
    
}
void KNoteEdit::dropEvent( QDropEvent *e )
{
  const QMimeData *md = e->mimeData();

  if ( KUrl::List::canDecode( md ) ) {
    KUrl::List list = KUrl::List::fromMimeData( md );
    KUrl::List::ConstIterator begin = list.constBegin();
    KUrl::List::ConstIterator end = list.constEnd();
    for ( KUrl::List::ConstIterator it = begin; it != end; ++it ) {
      if ( it != begin ) {
        insertPlainText( ", " );
      }
      insertPlainText( ( *it ).prettyUrl() );
    }
  } else {
      KTextEdit::dropEvent( e );
  }
}
Ejemplo n.º 21
0
K3BookmarkDrag * K3BookmarkDrag::newDrag( const Q3ValueList<KBookmark> & bookmarks, QWidget * dragSource, const char * name )
{
    KUrl::List urls;

    for ( Q3ValueListConstIterator<KBookmark> it = bookmarks.constBegin(); it != bookmarks.constEnd(); ++it ) {
       urls.append( (*it).url() );
    }

    // See KURLDrag::newDrag
    Q3StrList uris;
    KUrl::List::ConstIterator uit = urls.constBegin();
    KUrl::List::ConstIterator uEnd = urls.constEnd();
    // Get each URL encoded in utf8 - and since we get it in escaped
    // form on top of that, .toLatin1().constData() is fine.
    for ( ; uit != uEnd ; ++uit )
        uris.append( K3URLDrag::urlToString(*uit).toLatin1() );

    return new K3BookmarkDrag( bookmarks, uris, dragSource, name );
}
Ejemplo n.º 22
0
void ActionThread::convert2grayscale(const KUrl::List& urlList)
{
    JobCollection* const collection = new JobCollection();

    for (KUrl::List::const_iterator it = urlList.constBegin(); it != urlList.constEnd(); ++it )
    {
        ActionThread::Task* const t = new Task(this);
        t->fileUrl                  = *it;
        t->action                   = GrayScale;

        connect(t, SIGNAL(started(ThreadWeaver::Job*)),
                this, SLOT(slotJobStarted(ThreadWeaver::Job*)));

        connect(t, SIGNAL(done(ThreadWeaver::Job*)),
                this, SLOT(slotJobDone(ThreadWeaver::Job*)));

        collection->addJob(t);
    }

    appendJob(collection);
}
Ejemplo n.º 23
0
void ActionThread::flip(const KUrl::List& urlList, FlipAction val)
{
    JobCollection* collection = new JobCollection();

    for (KUrl::List::const_iterator it = urlList.constBegin();
         it != urlList.constEnd(); ++it )
    {
        Task* t       = new Task(this);
        t->fileUrl    = *it;
        t->action     = Flip;
        t->flipAction = val;

        connect(t, SIGNAL(started(ThreadWeaver::Job*)),
                this, SLOT(slotJobStarted(ThreadWeaver::Job*)));

        connect(t, SIGNAL(done(ThreadWeaver::Job*)),
                this, SLOT(slotJobDone(ThreadWeaver::Job*)));

        collection->addJob(t);
    }

    appendJob(collection);
}
Ejemplo n.º 24
0
bool KMail::Util::mailingListsHandleURL( const KUrl::List& lst,const QSharedPointer<MailCommon::FolderCollection> &folder )
{
  const QString handler = ( folder->mailingList().handler() == MailingList::KMail )
    ? QLatin1String( "mailto" ) : QLatin1String( "https" );

  KUrl urlToHandle;
  KUrl::List::ConstIterator end( lst.constEnd() );
  for ( KUrl::List::ConstIterator itr = lst.constBegin(); itr != end; ++itr ) {
    if ( handler == (*itr).protocol() ) {
      urlToHandle = *itr;
      break;
    }
  }
  if ( urlToHandle.isEmpty() && !lst.empty() ) {
    urlToHandle = lst.first();
  }

  if ( !urlToHandle.isEmpty() ) {
    return KMail::Util::handleClickedURL( urlToHandle, folder );
  } else {
    kWarning()<< "Can't handle url";
    return false;
  }
}
Ejemplo n.º 25
0
void BatchDialog::slotIdentify() // Set Identity and Target file
{
    QString ext;

    switch(d->saveSettingsBox->fileFormat())
    {
        case KPSaveSettingsWidget::OUTPUT_JPEG:
            ext = ".jpg";
            break;
        case KPSaveSettingsWidget::OUTPUT_TIFF:
            ext = ".tif";
            break;
        case KPSaveSettingsWidget::OUTPUT_PPM:
            ext = ".ppm";
            break;
        case KPSaveSettingsWidget::OUTPUT_PNG:
            ext = ".png";
            break;
    }

    KUrl::List urlList = d->listView->imageUrls(true);

    for (KUrl::List::const_iterator  it = urlList.constBegin(); it != urlList.constEnd(); ++it)
    {
        QFileInfo fi((*it).path());

        if(d->saveSettingsBox->conflictRule() == KPSaveSettingsWidget::OVERWRITE)
        {
            QString dest              = fi.completeBaseName() + ext;
            MyImageListViewItem* item = dynamic_cast<MyImageListViewItem*>(d->listView->listView()->findItem(*it));
            if (item) item->setDestFileName(dest);
        }
        else
        {
            QString dest = fi.absolutePath() + QString("/") + fi.completeBaseName() + ext;
            QFileInfo a(dest);

            bool fileNotFound = (a.exists());

            if (!fileNotFound)
            {
                dest = fi.completeBaseName() + ext;
            }

            else
            {
                int i = 0;
                while(fileNotFound)
                {
                    a = QFileInfo(dest);

                    if (!a.exists())
                    {
                        fileNotFound = false;
                    }
                    else
                    {
                        i++;
                        dest = fi.absolutePath() + QString("/") + fi.completeBaseName() + QString("_") + QString::number(i) + ext;
                    }
                }

                dest = fi.completeBaseName() + QString("_") + QString::number(i) + ext;
            }

            MyImageListViewItem* const item = dynamic_cast<MyImageListViewItem*>(d->listView->listView()->findItem(*it));

            if (item)
            {
                item->setDestFileName(dest);
            }
        }
    }

    if (!urlList.empty())
    {
        d->thread->identifyRawFiles(urlList);

        if (!d->thread->isRunning())
            d->thread->start();
    }
}
Ejemplo n.º 26
0
void PicasawebWindow::slotListPhotosDoneForUpload(int errCode, const QString &errMsg,
                                                  const QList <PicasaWebPhoto>& photosList)
{
    disconnect(m_talker, SIGNAL(signalListPhotosDone(int,QString,QList<PicasaWebPhoto>)),
               this, SLOT(slotListPhotosDoneForUpload(int,QString,QList<PicasaWebPhoto>)));

    if (errCode != 0)
    {
        KMessageBox::error(this, i18n("Picasaweb Call Failed: %1\n", errMsg));
        return;
    }

    typedef QPair<KUrl,PicasaWebPhoto> Pair;

    m_transferQueue.clear();

    KUrl::List urlList = m_widget->m_imgList->imageUrls(true);

    if (urlList.isEmpty())
        return;

    for (KUrl::List::ConstIterator it = urlList.constBegin(); it != urlList.constEnd(); ++it)
    {
        KPImageInfo info(*it);
        PicasaWebPhoto temp;
        temp.title = info.name();

        // Picasa doesn't support image titles. Include it in descriptions if needed.
        QStringList descriptions = QStringList() << info.title() << info.description();
        descriptions.removeAll("");
        temp.description = descriptions.join("\n\n");

        // check for existing items
        QString localId;
        KPMetadata meta;
        if (meta.load((*it).toLocalFile()))
        {
            localId = meta.getXmpTagString("Xmp.kipi.picasawebGPhotoId");
        }
        QList<PicasaWebPhoto>::const_iterator itPWP;
        for (itPWP = photosList.begin(); itPWP != photosList.end(); ++itPWP)
        {
            if ((*itPWP).id == localId)
            {
                temp.id       = localId;
                temp.editUrl  = (*itPWP).editUrl;
                temp.thumbURL = (*itPWP).thumbURL;
                break;
            }
        }

        //Tags from the database
        temp.gpsLat.setNum(info.latitude());
        temp.gpsLon.setNum(info.longitude());

        temp.tags = info.tagsPath();
        m_transferQueue.append( Pair( (*it), temp) );
    }

    if (m_transferQueue.isEmpty())
        return;

    m_currentAlbumID = m_widget->m_albumsCoB->itemData(
                                 m_widget->m_albumsCoB->currentIndex()).toString();
    m_imagesTotal = m_transferQueue.count();
    m_imagesCount = 0;

    m_widget->progressBar()->setFormat(i18n("%v / %m"));
    m_widget->progressBar()->setMaximum(m_imagesTotal);
    m_widget->progressBar()->setValue(0);
    m_widget->progressBar()->show();
    m_widget->progressBar()->progressScheduled(i18n("Picasa Export"), true, true);
    m_widget->progressBar()->progressThumbnailChanged(KIcon("kipi").pixmap(22, 22));


    m_renamingOpt = 0;

    uploadNextPhoto();
}
void KOEditorAttachments::handlePasteOrDrop( const QMimeData *mimeData )
{
  KUrl::List urls;
  bool probablyWeHaveUris = false;
  bool weCanCopy = true;
  QStringList labels;

  if ( KPIM::KVCardDrag::canDecode( mimeData ) ) {
    KABC::Addressee::List addressees;
    KPIM::KVCardDrag::fromMimeData( mimeData, addressees );
    for ( KABC::Addressee::List::ConstIterator it = addressees.constBegin();
          it != addressees.constEnd(); ++it ) {
      urls.append( KDEPIMPROTOCOL_CONTACT + ( *it ).uid() );
      // there is some weirdness about realName(), hence fromUtf8
      labels.append( QString::fromUtf8( ( *it ).realName().toLatin1() ) );
    }
    probablyWeHaveUris = true;
  } else if ( KUrl::List::canDecode( mimeData ) ) {
    QMap<QString,QString> metadata;

    urls = KUrl::List::fromMimeData( mimeData, &metadata );
    probablyWeHaveUris = true;
    labels = metadata["labels"].split( ':', QString::SkipEmptyParts );
    for ( QStringList::Iterator it = labels.begin(); it != labels.end(); ++it ) {
      *it = KUrl::fromPercentEncoding( (*it).toLatin1() );
    }
  } else if ( mimeData->hasText() ) {
    QString text = mimeData->text();
    QStringList lst = text.split( '\n', QString::SkipEmptyParts );
    for ( QStringList::ConstIterator it = lst.constBegin(); it != lst.constEnd(); ++it ) {
      urls.append( *it );
    }
    probablyWeHaveUris = true;
  }

  KMenu menu( this );
  QAction *linkAction = 0, *cancelAction;
  if ( probablyWeHaveUris ) {
    linkAction = menu.addAction( i18nc( "@action:inmenu", "&Link here" ) );
    // we need to check if we can reasonably expect to copy the objects
    for ( KUrl::List::ConstIterator it = urls.constBegin(); it != urls.constEnd(); ++it ) {
      if ( !( weCanCopy = KProtocolManager::supportsReading( *it ) ) ) {
        break; // either we can copy them all, or no copying at all
      }
    }
    if ( weCanCopy ) {
      menu.addAction( i18nc( "@action:inmenu", "&Copy here" ) );
    }
  } else {
    menu.addAction( i18nc( "@action:inmenu", "&Copy here" ) );
  }

  menu.addSeparator();
  cancelAction = menu.addAction( i18nc( "@action:inmenu", "C&ancel" ) );

  QByteArray data;
  QString mimeType;
  QString label;

  if(!mimeData->formats().isEmpty() && !probablyWeHaveUris) {
    data=mimeData->data( mimeData->formats().first() );
    mimeType = mimeData->formats().first();
    if( KMimeType::mimeType( mimeData->formats().first() ) )
      label = KMimeType::mimeType( mimeData->formats().first() )->name();
  }


  QAction *ret = menu.exec( QCursor::pos() );
  if ( linkAction == ret ) {
    QStringList::ConstIterator jt = labels.constBegin();
    for ( KUrl::List::ConstIterator it = urls.constBegin();
          it != urls.constEnd(); ++it ) {
      addUriAttachment( (*it).url(), QString(), ( jt == labels.constEnd() ?
                                                  QString() : *( jt++ ) ), true );
    }
  } else if ( cancelAction != ret ) {
    if ( probablyWeHaveUris ) {
      for ( KUrl::List::ConstIterator it = urls.constBegin();
            it != urls.constEnd(); ++it ) {
        KIO::Job *job = KIO::storedGet( *it );
        connect( job, SIGNAL(result(KJob *)), SLOT(downloadComplete(KJob *)) );
      }
    } else { // we take anything
      addDataAttachment( data,
                         mimeType,
                         label );
    }
  }
}
Ejemplo n.º 28
0
int main(int argc, char **argv)
{
    KCmdLineOptions options;
    options.add("+[cmd]");
    options.add("+[url]");

    KCmdLineArgs::init(argc, argv, "kfstest", 0, ki18n("kfstest"), "0", ki18n("test app"));
    KCmdLineArgs::addCmdLineOptions(options);
    KApplication a;
    a.setQuitOnLastWindowClosed(false);

    QString name1;
    QStringList names;

    QString argv1;
    KUrl startDir;
    if (argc > 1)
        argv1 = QLatin1String(argv[1]);
    if ( argc > 2 )
        startDir = KUrl( argv[2] );

#if 0 // SPLIT-TODO
    if (argv1 == QLatin1String("diroperator")) {
        KDirOperator *op = new KDirOperator(startDir, 0);
        KConfigGroup grp(KGlobal::config(), "TestGroup" );
        op->setViewConfig(grp);
        op->setView(KFile::Simple);
        op->show();
        a.exec();
    } else
#endif
    if (argv1 == QLatin1String("localonly")) {
        QString name = KFileDialog::getOpenFileName(startDir);
        qDebug("filename=%s",name.toLatin1().constData());
    }
    else if (argv1 == QLatin1String("oneurl")) {
        KUrl url = KFileDialog::getOpenUrl(startDir);
        qDebug() << "url=" << url;
    }

    else if (argv1 == QLatin1String("existingDirectoryUrl")) {
        KUrl url = KFileDialog::getExistingDirectoryUrl();
        qDebug("URL=%s",url.url().toLatin1().constData());
        name1 = url.url();
    }

    else if (argv1 == QLatin1String("preview")) {
        KUrl u =  KFileDialog::getImageOpenUrl();
        qDebug("filename=%s", u.url().toLatin1().constData());
    }

    else if (argv1 == QLatin1String("preselect")) {
        names = KFileDialog::getOpenFileNames(KUrl("/etc/passwd"));
        QStringList::Iterator it = names.begin();
        while ( it != names.end() ) {
            qDebug("selected file: %s", (*it).toLatin1().constData());
            ++it;
        }
    }

    else if (argv1 == QLatin1String("dirs"))
        name1 = KFileDialog::getExistingDirectory();

    else if (argv1 == QLatin1String("heap")) {
        KFileDialog *dlg = new KFileDialog( startDir, QString(), 0L);
        dlg->setMode( KFile::File);
        dlg->setOperationMode( KFileDialog::Saving );
        QStringList filter;
        filter << "all/allfiles" << "text/plain";
        dlg->setMimeFilter( filter, "all/allfiles" );
#if 0 // SPLIT-TODO
        KUrlBar *urlBar = dlg->speedBar();
        if ( urlBar )
        {
            urlBar->insertDynamicItem( KUrl("ftp://ftp.kde.org"),
                                       QLatin1String("KDE FTP Server") );
        }
#endif
        if ( dlg->exec() == KDialog::Accepted )
            name1 = dlg->selectedUrl().url();
    }

    else if ( argv1 == QLatin1String("eventloop") )
    {
        new KFDTest( startDir );
        return a.exec();
    }

    else if (argv1 == QLatin1String("save")) {
        KUrl u = KFileDialog::getSaveUrl(startDir);
//        QString(QDir::homePath() + QLatin1String("/testfile")),
//        QString(), 0L);
        name1 = u.url();
    }

    else if (argv1 == QLatin1String("icon")) {
        KIconDialog dlg;
        QString icon = dlg.getIcon();
        kDebug() << icon;
    }

//     else if ( argv1 == QLatin1String("dirselect") ) {
//         KUrl url;
//         url.setPath( "/" );
//         KUrl selected = KDirSelectDialog::selectDirectory( url );
//         name1 = selected.url();
//         qDebug("*** selected: %s", selected.url().toLatin1().constData());
//     }

    else {
        KFileDialog dlg(startDir,
                        QString::fromLatin1("*|All Files\n"
                                            "*.lo *.o *.la|All libtool Files"),0);
//    dlg.setFilter( "*.kdevelop" );
        dlg.setMode( KFile::Files |
                     KFile::Directory |
                     KFile::ExistingOnly |
                     KFile::LocalOnly );
//        QStringList filter;
//        filter << "text/plain" << "text/html" << "image/png";
//        dlg.setMimeFilter( filter );
//        KMimeType::List types;
//        types.append( KMimeType::mimeType( "text/plain" ) );
//        types.append( KMimeType::mimeType( "text/html" ) );
//        dlg.setFilterMimeType( "Filetypes:", types, types.first() );
        if ( dlg.exec() == QDialog::Accepted ) {
            const KUrl::List list = dlg.selectedUrls();
            KUrl::List::ConstIterator it = list.constBegin();
            qDebug("*** selectedUrls(): ");
            while ( it != list.constEnd() ) {
                name1 = (*it).url();
                qDebug("  -> %s", name1.toLatin1().constData());
                ++it;
            }
            qDebug("*** selectedFile: %s", dlg.selectedFile().toLatin1().constData());
            qDebug("*** selectedUrl: %s", dlg.selectedUrl().url().toLatin1().constData());
            qDebug("*** selectedFiles: ");
            QStringList l = dlg.selectedFiles();
            QStringList::Iterator it2 = l.begin();
            while ( it2 != l.end() ) {
                qDebug("  -> %s", (*it2).toLatin1().constData());
                ++it2;
            }
        }
    }

    if (!(name1.isNull()))
        KMessageBox::information(0, QLatin1String("You selected the file " ) + name1,
                                 QLatin1String("Your Choice"));
    return 0;
}
Ejemplo n.º 29
0
/*!
    \fn KmlExport::generate()
 */
void KmlExport::generate()
{
    //! @todo perform a test here before continuing.
    createDir(QString(m_tempDestDir + m_imageDir));

    m_progressDialog->show();
    ImageCollection selection = m_interface->currentSelection();
    ImageCollection album     = m_interface->currentAlbum();

    // create the document, and it's root
    m_kmlDocument                   = new QDomDocument("");
    QDomImplementation impl;
    QDomProcessingInstruction instr = m_kmlDocument->createProcessingInstruction("xml", "version=\"1.0\" encoding=\"UTF-8\"");
    m_kmlDocument->appendChild(instr);
    QDomElement kmlRoot             = m_kmlDocument->createElementNS("http://www.opengis.net/kml/2.2", "kml");
    m_kmlDocument->appendChild( kmlRoot );

    QDomElement kmlAlbum            = addKmlElement(kmlRoot, "Document");
    QDomElement kmlName             = addKmlTextElement(kmlAlbum, "name", album.name());
    QDomElement kmlDescription      = addKmlHtmlElement(kmlAlbum, "description",
                                                        "Created with kmlexport <a href=\"http://www.digikam.org/\">kipi-plugin</a>");

    if (m_GPXtracks)
    {
        addTrack(kmlAlbum);
    }

    KPMetadata meta;
    KUrl::List images = selection.images();
    int defectImage   = 0;
    int pos           = 1;
    int count         = images.count();
    KUrl::List::ConstIterator imagesEnd (images.constEnd());

    for( KUrl::List::ConstIterator selIt = images.constBegin(); selIt != imagesEnd; ++selIt, ++pos)
    {
        double alt, lat, lng;
        KUrl url        = *selIt;
        KPImageInfo info(url);
        bool hasGPSInfo = info.hasGeolocationInfo();

        if (hasGPSInfo)
        {
            lat = info.latitude();
            lng = info.longitude();
            alt = info.altitude();
        }
        else
        {
            meta.load(url.path());
            hasGPSInfo = meta.getGPSInfo(alt, lat, lng);
        }

        if ( hasGPSInfo )
        {
            // generation de l'image et de l'icone
            generateImagesthumb(url, kmlAlbum);
        }
        else
        {
            logWarning(i18n("No position data for '%1'", info.name()));
            defectImage++;
        }

        m_progressDialog->progressWidget()->setProgress(pos, count);
        kapp->processEvents();
    }

    if (defectImage)
    {
        /** @todo if defectImage==count there are no pictures exported, does is it worth to continue? */
        KMessageBox::information(kapp->activeWindow(),
                                 i18np("No position data for 1 picture",
                                       "No position data for %1 pictures", defectImage));
    }

    /** @todo change to kml or kmz if compressed */
    QFile file( m_tempDestDir + m_KMLFileName + ".kml");
    /** @todo handle file opening problems */
    file.open( QIODevice::WriteOnly );
    QTextStream stream( &file ); // we will serialize the data into the file
    stream << m_kmlDocument->toString();
    file.close();

    delete m_kmlDocument;
    m_kmlDocument = 0;

    KIO::moveAs(m_tempDestDir, m_baseDestDir, KIO::HideProgressInfo | KIO::Overwrite);
    logInfo(i18n("Move to final directory"));
    m_progressDialog->close();
}
void BracketStackList::addItems(const KUrl::List& list)
{
    if (list.count() == 0)
        return;

    KUrl::List urls;

    for ( KUrl::List::ConstIterator it = list.constBegin(); it != list.constEnd(); ++it )
    {
        KUrl imageUrl = *it;

        // Check if the new item already exist in the list.
        bool found = false;

        QTreeWidgetItemIterator iter(this);
        while (*iter)
        {
            BracketStackItem* item = dynamic_cast<BracketStackItem*>(*iter);

            if (item->url() == imageUrl)
                found = true;

            ++iter;
        }

        if (!found)
        {
            BracketStackItem* item = new BracketStackItem(this);
            item->setUrl(imageUrl);
            item->setOn(true);
            urls.append(imageUrl);
        }
    }

    if (d->iface)
    {
        d->iface->thumbnails(urls, iconSize().width());
    }
    else
    {
#if KDE_IS_VERSION(4,7,0)
        KFileItemList items;
        for (KUrl::List::ConstIterator it = urls.begin() ; it != urls.end() ; ++it)
        {
            if ((*it).isValid())
                items.append(KFileItem(KFileItem::Unknown, KFileItem::Unknown, *it, true));
        }
        KIO::PreviewJob* job = KIO::filePreview(items, iconSize());
#else
        KIO::PreviewJob *job = KIO::filePreview(urls, iconSize().width());
#endif

        connect(job, SIGNAL(gotPreview(KFileItem,QPixmap)),
                this, SLOT(slotKDEPreview(KFileItem,QPixmap)));

        connect(job, SIGNAL(failed(KFileItem)),
                this, SLOT(slotKDEPreviewFailed(KFileItem)));
    }

    emit signalAddItems(urls);
}