Ejemplo n.º 1
0
// virtual
void KeyframeHelper::mousePressEvent(QMouseEvent * event)
{
    m_hoverKeyframe = -1;
    if (event->button() != Qt::LeftButton) {
        QWidget::mousePressEvent(event);
        return;
    }
    int xPos = event->x() - margin;
    int headOffset = m_lineHeight / 1.5;
    if (m_geom != NULL && (event->y() <= headOffset)) {
        // check if we want to move a keyframe
        int mousePos = qMax((int)(xPos / m_scale), 0) + m_offset;
        Mlt::GeometryItem item;
        if (m_geom->next_key(&item, mousePos) == 0) {
            if (qAbs((item.frame() - m_offset)* m_scale - xPos) < headOffset) {
                m_movingItem.x(item.x());
                m_movingItem.y(item.y());
                m_movingItem.w(item.w());
                m_movingItem.h(item.h());
                m_movingItem.mix(item.mix());
                m_movingItem.frame(item.frame());

                while (!m_extraMovingItems.isEmpty()) {
                    Mlt::GeometryItem *gitem = m_extraMovingItems.takeFirst();
                    if (gitem) delete gitem;
                }
                for (int i = 0; i < m_extraGeometries.count(); ++i) {
                    if (m_extraGeometries.at(i)->next_key(item, mousePos) == 0) {
                        Mlt::GeometryItem *item2 = new Mlt::GeometryItem();
                        item2->x(item.x());
                        item2->frame(item.frame());
                        m_extraMovingItems.append(item2);
                    } else {
                        m_extraMovingItems.append(NULL);
                    }
                }
                m_dragStart = event->pos();
                return;
            }
        }
    }
    int seekRequest = xPos / m_scale;
    if (seekRequest != m_position) {
        m_seekPosition = seekRequest;
        emit requestSeek(m_seekPosition);
        update();
    }
}
Ejemplo n.º 2
0
void Geometryval::slotDeleteFrame(int pos)
{
    // check there is more than one keyframe
    Mlt::GeometryItem item;
    int frame = m_timePos.getValue();

    if (pos == -1) pos = frame;
    int error = m_geom->next_key(&item, pos + 1);
    if (error) {
        error = m_geom->prev_key(&item, pos - 1);
        if (error || item.frame() == pos) return;
    }

    m_geom->remove(frame);
    buttonAdd->setEnabled(true);
    buttonDelete->setEnabled(false);
    widget->setEnabled(false);
    spinTransp->setEnabled(false);
    frameOptions->setEnabled(false);
    m_reset->setEnabled(false);
    m_helper->update();
    slotPositionChanged(pos, false);
    updateTransitionPath();
    emit parameterChanged();
}
Ejemplo n.º 3
0
void Geometryval::slotPreviousFrame()
{
    Mlt::GeometryItem item;
    int error = m_geom->prev_key(&item, m_helper->value() - 1);
    kDebug() << "// SEEK TO NEXT KFR: " << error;
    if (error) return;
    int pos = item.frame();
    m_ui.spinPos->setValue(pos);
}
Ejemplo n.º 4
0
void Geometryval::slotPreviousFrame()
{
    Mlt::GeometryItem item;
    int error = m_geom->prev_key(&item, m_helper->value() - 1);
    //qDebug() << "// SEEK TO NEXT KFR: " << error;
    if (error) return;
    int pos = item.frame();
    m_timePos.setValue(pos);
    slotPositionChanged();
}
Ejemplo n.º 5
0
void Geometryval::slotNextFrame()
{
    Mlt::GeometryItem item;
    int error = m_geom->next_key(&item, m_helper->value() + 1);
    kDebug() << "// SEEK TO NEXT KFR: " << error;
    if (error) {
        // Go to end
        m_ui.spinPos->setValue(m_ui.spinPos->maximum());
        return;
    }
    int pos = item.frame();
    m_ui.spinPos->setValue(pos);
}
Ejemplo n.º 6
0
QString GeometryWidget::offsetAnimation(int offset, bool useOffset)
{
    Mlt::Geometry *geometry = new Mlt::Geometry((char*)NULL, m_outPoint, m_monitor->render->frameRenderWidth(), m_monitor->render->renderHeight());
    Mlt::GeometryItem item;
    int pos = 0;
    int ix = 0;
    while (!m_geometry->next_key(&item, pos)) {
        pos = item.frame() + 1;
        item.frame(item.frame() + offset);
        geometry->insert(item);
        ix++;
    }
    m_useOffset = useOffset;
    QString result = geometry->serialise();
    if (!m_fixedGeom && result.contains(QStringLiteral(";")) && !result.section(QStringLiteral(";"),0,0).contains(QStringLiteral("="))) {
        result.prepend("0=");
    }
    m_geometry->parse(result.toUtf8().data(), m_outPoint, m_monitor->render->frameRenderWidth(), m_monitor->render->renderHeight());
    m_timeline->setKeyGeometry(m_geometry, m_inPoint, m_outPoint, m_useOffset);
    delete geometry;
    return result;
}
Ejemplo n.º 7
0
void Geometryval::slotNextFrame()
{
    Mlt::GeometryItem item;
    int error = m_geom->next_key(&item, m_helper->value() + 1);
    int pos;
    //qDebug() << "// SEEK TO NEXT KFR: " << error;
    if (error) {
        // Go to end
        pos = m_helper->frameLength;
    } else pos = item.frame();
    m_timePos.setValue(pos);
    slotPositionChanged();
}
Ejemplo n.º 8
0
void Geometryval::slotUpdateTransitionProperties()
{
    int pos = m_timePos.getValue();
    Mlt::GeometryItem item;
    int error = m_geom->next_key(&item, pos);
    if (error || item.frame() != pos) {
        // no keyframe under cursor
        return;
    }
    QRectF r = m_paramRect->rect().normalized();
    QPointF rectpos = m_paramRect->pos();
    item.x(rectpos.x() / m_dar);
    item.y(rectpos.y());
    item.w(r.width() / m_dar);
    item.h(r.height());
    m_geom->insert(item);
    updateTransitionPath();
    emit parameterChanged();
}
Ejemplo n.º 9
0
void Geometryval::slotAddFrame()
{
    int pos = m_ui.spinPos->value();
    Mlt::GeometryItem item;
    item.frame(pos);
    item.x(m_paramRect->pos().x());
    item.y(m_paramRect->pos().y());
    item.w(m_paramRect->rect().width());
    item.h(m_paramRect->rect().height());
    item.mix(m_ui.spinTransp->value());
    m_geom->insert(item);
    m_ui.buttonAdd->setEnabled(false);
    m_ui.buttonDelete->setEnabled(true);
    m_ui.widget->setEnabled(true);
    m_ui.spinTransp->setEnabled(true);
    m_scaleMenu->setEnabled(true);
    m_alignMenu->setEnabled(true);
    m_helper->update();
    emit parameterChanged();
}
Ejemplo n.º 10
0
void Geometryval::updateTransitionPath()
{
    if (m_fixedMode) return;
    Mlt::GeometryItem item;
    int pos = 0;
    int counter = 0;
    QPainterPath path;
    while (true) {
        if (m_geom->next_key(&item, pos) == 1) break;
        pos = item.frame();
        if (counter == 0) {
            path.moveTo(item.x() * m_dar + item.w() * m_dar / 2, item.y() + item.h() / 2);
        } else {
            path.lineTo(item.x() * m_dar + item.w() * m_dar / 2, item.y() + item.h() / 2);
        }
        counter++;
        pos++;
    }
    m_path->setPath(path);
}
Ejemplo n.º 11
0
void Geometryval::slotDeleteFrame()
{
    // check there is more than one keyframe
    Mlt::GeometryItem item;
    const int pos = m_ui.spinPos->value();
    int error = m_geom->next_key(&item, pos + 1);
    if (error) {
        error = m_geom->prev_key(&item, pos - 1);
        if (error || item.frame() == pos) return;
    }

    m_geom->remove(m_ui.spinPos->value());
    m_ui.buttonAdd->setEnabled(true);
    m_ui.buttonDelete->setEnabled(false);
    m_ui.widget->setEnabled(false);
    m_ui.spinTransp->setEnabled(false);
    m_scaleMenu->setEnabled(false);
    m_alignMenu->setEnabled(false);
    m_helper->update();
    slotPositionChanged(pos, false);
    updateTransitionPath();
    emit parameterChanged();
}
Ejemplo n.º 12
0
void Geometryval::slotAddFrame(int pos)
{
    int frame = m_timePos.getValue();
    if (pos == -1) pos = frame;
    Mlt::GeometryItem item;
    item.frame(pos);
    QRectF r = m_paramRect->rect().normalized();
    QPointF rectpos = m_paramRect->pos();
    item.x(rectpos.x() / m_dar);
    item.y(rectpos.y());
    item.w(r.width() / m_dar);
    item.h(r.height());
    item.mix(spinTransp->value());
    m_geom->insert(item);
    buttonAdd->setEnabled(false);
    buttonDelete->setEnabled(true);
    widget->setEnabled(true);
    spinTransp->setEnabled(true);
    frameOptions->setEnabled(true);
    m_reset->setEnabled(true);
    m_helper->update();
    emit parameterChanged();
}