size_t
ModuleList::RemoveOrphans (bool mandatory)
{
Mutex::Locker locker;
if (mandatory)
{
locker.Lock (m_modules_mutex);
}
else
{
// Not mandatory, remove orphans if we can get the mutex
if (!locker.TryLock(m_modules_mutex))
return 0;
}
collection::iterator pos = m_modules.begin();
size_t remove_count = 0;
while (pos != m_modules.end())
{
if (pos->unique())
{
pos = RemoveImpl(pos);
++remove_count;
}
else
{
++pos;
}
}
return remove_count;
}
ConnectionStatus
ConnectionFileDescriptor::Disconnect (Error *error_ptr)
{
Log *log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_CONNECTION));
if (log)
log->Printf ("%p ConnectionFileDescriptor::Disconnect ()",
static_cast<void*>(this));
ConnectionStatus status = eConnectionStatusSuccess;
if (!IsConnected())
{
if (log)
log->Printf ("%p ConnectionFileDescriptor::Disconnect(): Nothing to disconnect",
static_cast<void*>(this));
return eConnectionStatusSuccess;
}
if (m_read_sp && m_read_sp->IsValid() && m_read_sp->GetFdType() == IOObject::eFDTypeSocket)
static_cast<Socket&>(*m_read_sp).PreDisconnect();
// Try to get the ConnectionFileDescriptor's mutex. If we fail, that is quite likely
// because somebody is doing a blocking read on our file descriptor. If that's the case,
// then send the "q" char to the command file channel so the read will wake up and the connection
// will then know to shut down.
m_shutting_down = true;
Mutex::Locker locker;
bool got_lock = locker.TryLock (m_mutex);
if (!got_lock)
{
if (m_pipe.WriteDescriptorIsValid())
{
int result;
result = m_pipe.Write("q", 1) == 1;
if (log)
log->Printf ("%p ConnectionFileDescriptor::Disconnect(): Couldn't get the lock, sent 'q' to %d, result = %d.",
static_cast<void*>(this), m_pipe.GetWriteFileDescriptor(), result);
}
else if (log)
{
log->Printf ("%p ConnectionFileDescriptor::Disconnect(): Couldn't get the lock, but no command pipe is available.",
static_cast<void*>(this));
}
locker.Lock (m_mutex);
}
Error error = m_read_sp->Close();
Error error2 = m_write_sp->Close();
if (error.Fail() || error2.Fail())
status = eConnectionStatusError;
if (error_ptr)
*error_ptr = error.Fail() ? error : error2;
m_shutting_down = false;
return status;
}
bool
GDBRemoteCommunication::GetSequenceMutex (Mutex::Locker& locker, const char *failure_message)
{
if (IsRunning())
return locker.TryLock (m_sequence_mutex, failure_message);
locker.Lock (m_sequence_mutex);
return true;
}
ExecutionContext::ExecutionContext (const ExecutionContextRef &exe_ctx_ref, Mutex::Locker &locker) :
m_target_sp (exe_ctx_ref.GetTargetSP()),
m_process_sp (),
m_thread_sp (),
m_frame_sp ()
{
if (m_target_sp)
{
locker.Lock(m_target_sp->GetAPIMutex());
m_process_sp = exe_ctx_ref.GetProcessSP();
m_thread_sp = exe_ctx_ref.GetThreadSP();
m_frame_sp = exe_ctx_ref.GetFrameSP();
}
}
lldb::ValueObjectSP
GetSP (Process::StopLocker &stop_locker, Mutex::Locker &api_locker, Error &error)
{
Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_API));
if (!m_valobj_sp)
{
error.SetErrorString("invalid value object");
return m_valobj_sp;
}
lldb::ValueObjectSP value_sp = m_valobj_sp;
Target *target = value_sp->GetTargetSP().get();
if (target)
api_locker.Lock(target->GetAPIMutex());
ProcessSP process_sp(value_sp->GetProcessSP());
if (process_sp && !stop_locker.TryLock (&process_sp->GetRunLock()))
{
// We don't allow people to play around with ValueObject if the process is running.
// If you want to look at values, pause the process, then look.
if (log)
log->Printf ("SBValue(%p)::GetSP() => error: process is running", value_sp.get());
error.SetErrorString ("process must be stopped.");
return ValueObjectSP();
}
if (value_sp->GetDynamicValue(m_use_dynamic))
value_sp = value_sp->GetDynamicValue(m_use_dynamic);
if (value_sp->GetSyntheticValue(m_use_synthetic))
value_sp = value_sp->GetSyntheticValue(m_use_synthetic);
if (!value_sp)
error.SetErrorString("invalid value object");
if (!m_name.IsEmpty())
value_sp->SetName(m_name);
return value_sp;
}
size_t
ConnectionFileDescriptor::Read (void *dst,
size_t dst_len,
uint32_t timeout_usec,
ConnectionStatus &status,
Error *error_ptr)
{
LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_CONNECTION));
if (log)
log->Printf ("%p ConnectionFileDescriptor::Read () ::read (fd = %i, dst = %p, dst_len = %llu)...",
this, m_fd_recv, dst, (uint64_t)dst_len);
Mutex::Locker locker;
bool got_lock = locker.TryLock (m_mutex);
if (!got_lock)
{
if (log)
log->Printf ("%p ConnectionFileDescriptor::Read () failed to get the connection lock.",
this);
if (error_ptr)
error_ptr->SetErrorString ("failed to get the connection lock for read.");
status = eConnectionStatusTimedOut;
return 0;
}
else if (m_shutting_down)
return eConnectionStatusError;
ssize_t bytes_read = 0;
status = BytesAvailable (timeout_usec, error_ptr);
if (status == eConnectionStatusSuccess)
{
do
{
bytes_read = ::read (m_fd_recv, dst, dst_len);
} while (bytes_read < 0 && errno == EINTR);
}
if (status != eConnectionStatusSuccess)
return 0;
Error error;
if (bytes_read == 0)
{
error.Clear(); // End-of-file. Do not automatically close; pass along for the end-of-file handlers.
status = eConnectionStatusEndOfFile;
}
else if (bytes_read < 0)
{
error.SetErrorToErrno();
}
else
{
error.Clear();
}
if (log)
log->Printf ("%p ConnectionFileDescriptor::Read () ::read (fd = %i, dst = %p, dst_len = %llu) => %lli, error = %s",
this,
m_fd_recv,
dst,
(uint64_t)dst_len,
(int64_t)bytes_read,
error.AsCString());
if (error_ptr)
*error_ptr = error;
if (error.Fail())
{
uint32_t error_value = error.GetError();
switch (error_value)
{
case EAGAIN: // The file was marked for non-blocking I/O, and no data were ready to be read.
if (m_fd_recv_type == eFDTypeSocket || m_fd_recv_type == eFDTypeSocketUDP)
status = eConnectionStatusTimedOut;
else
status = eConnectionStatusSuccess;
return 0;
case EFAULT: // Buf points outside the allocated address space.
case EINTR: // A read from a slow device was interrupted before any data arrived by the delivery of a signal.
case EINVAL: // The pointer associated with fildes was negative.
case EIO: // An I/O error occurred while reading from the file system.
// The process group is orphaned.
// The file is a regular file, nbyte is greater than 0,
// the starting position is before the end-of-file, and
// the starting position is greater than or equal to the
// offset maximum established for the open file
// descriptor associated with fildes.
case EISDIR: // An attempt is made to read a directory.
case ENOBUFS: // An attempt to allocate a memory buffer fails.
case ENOMEM: // Insufficient memory is available.
status = eConnectionStatusError;
break; // Break to close....
case ENOENT: // no such file or directory
case EBADF: // fildes is not a valid file or socket descriptor open for reading.
case ENXIO: // An action is requested of a device that does not exist..
// A requested action cannot be performed by the device.
case ECONNRESET:// The connection is closed by the peer during a read attempt on a socket.
case ENOTCONN: // A read is attempted on an unconnected socket.
status = eConnectionStatusLostConnection;
break; // Break to close....
case ETIMEDOUT: // A transmission timeout occurs during a read attempt on a socket.
status = eConnectionStatusTimedOut;
return 0;
}
//Disconnect (NULL);
return 0;
}
return bytes_read;
}
ConnectionStatus
ConnectionFileDescriptor::Disconnect (Error *error_ptr)
{
LogSP log(lldb_private::GetLogIfAnyCategoriesSet (LIBLLDB_LOG_CONNECTION));
if (log)
log->Printf ("%p ConnectionFileDescriptor::Disconnect ()", this);
ConnectionStatus status = eConnectionStatusSuccess;
if (m_fd_send < 0 && m_fd_recv < 0)
{
if (log)
log->Printf ("%p ConnectionFileDescriptor::Disconnect(): Nothing to disconnect", this);
return eConnectionStatusSuccess;
}
// Try to get the ConnectionFileDescriptor's mutex. If we fail, that is quite likely
// because somebody is doing a blocking read on our file descriptor. If that's the case,
// then send the "q" char to the command file channel so the read will wake up and the connection
// will then know to shut down.
m_shutting_down = true;
Mutex::Locker locker;
bool got_lock= locker.TryLock (m_mutex);
if (!got_lock)
{
if (m_pipe_write != -1 )
{
write (m_pipe_write, "q", 1);
close (m_pipe_write);
m_pipe_write = -1;
}
locker.Lock (m_mutex);
}
if (m_should_close_fd == true)
{
if (m_fd_send == m_fd_recv)
{
status = Close (m_fd_send, error_ptr);
}
else
{
// File descriptors are the different, close both if needed
if (m_fd_send >= 0)
status = Close (m_fd_send, error_ptr);
if (m_fd_recv >= 0)
{
ConnectionStatus recv_status = Close (m_fd_recv, error_ptr);
if (status == eConnectionStatusSuccess)
status = recv_status;
}
}
}
// Now set all our descriptors to invalid values.
m_fd_send = m_fd_recv = -1;
if (status != eConnectionStatusSuccess)
{
return status;
}
m_shutting_down = false;
return eConnectionStatusSuccess;
}
void
WatchpointList::GetListMutex (Mutex::Locker &locker)
{
return locker.Lock (m_mutex);
}
bool
CommunicationKDP::GetSequenceMutex (Mutex::Locker& locker)
{
return locker.TryLock (m_sequence_mutex);
}
