Ejemplo n.º 1
0
//
// Initialize GLUT & OpenSG and set up the scene
//
int main(int argc, char **argv)
{
    // OSG init
    OSG::osgInit(argc,argv);

    // GLUT init
    int winid = setupGLUT(&argc, argv);

    // open a new scope, because the pointers below should go out of scope
    // before entering glutMainLoop.
    // Otherwise OpenSG will complain about objects being alive after shutdown.
    {
        // the connection between GLUT and OpenSG
        OSG::GLUTWindowRefPtr gwin = OSG::GLUTWindow::create();
        gwin->setGlutId(winid);
        gwin->init();
    
        // create the SimpleSceneManager helper
        mgr = OSG::SimpleSceneManager::create();
        mgr->setWindow(gwin);

        // create a pretty simple graph: a Group with two Transforms as children,
        // each of which carries a single Geometry.
        
        // The scene
        
        OSG::NodeRefPtr  scene = OSG::Node::create();
        
        // The cylinder and its transformation
        OSG::NodeRefPtr     cyl    = OSG::Node::create();
        OSG::GeometryRefPtr cylgeo = OSG::makeCylinderGeo( 1.4f, .3f, 24, 
                                                           true, true, true );
        
        cyl->setCore(cylgeo);
    
        cyltrans = OSG::Transform::create();
    
        OSG::NodeRefPtr cyltransnode = OSG::Node::create();
        cyltransnode->setCore (cyltrans);
        cyltransnode->addChild(cyl     );
        
        // add it to the scene
        scene->addChild(cyltransnode);
        
        // The torus and its transformation
        OSG::NodeRefPtr     torus    = OSG::Node::create();
        OSG::GeometryRefPtr torusgeo = OSG::makeTorusGeo( .2f, 1, 24, 36 );
        
        torus->setCore(torusgeo);
            
        tortrans = OSG::Transform::create();
    
        OSG::NodeRefPtr tortransnode = OSG::Node::create();
        tortransnode->setCore (tortrans);
        tortransnode->addChild(torus   );
        
        // add it to the scene
        scene->addChild(tortransnode);

        //
        // create the shader program
        //
        OSG::ShaderProgramChunkRefPtr prog_chunk = OSG::ShaderProgramChunk::create();
        OSG::ShaderProgramRefPtr      vertShader = OSG::ShaderProgram::createVertexShader();
        OSG::ShaderProgramRefPtr      fragShader = OSG::ShaderProgram::createFragmentShader();

        vertShader->setProgram(get_vp_program());
        fragShader->setProgram(get_fp_program());

        //
        // binding the unifrom block to a buffer binding point can be performed 
        // either by calling the shaders's addUniformBlock method or by
        // adding a 'uniform block' variable to a ShaderProgramVariableChunk.
        // In the following we use both variants for illustration.
        //
        fragShader->addUniformBlock("Materials", 1);    // block binding point
        fragShader->addUniformBlock("Lights",    2);    // block binding point

        //
        // The following is replaced by adding ShaderProgramVariableChunk objects
        // to the chunk material. See below...
        //
        // fragShader->addUniformBlock("GeomState", 3);    // block binding point

        prog_chunk->addShader(vertShader);
        prog_chunk->addShader(fragShader);

        //
        // create uniform buffer objects and corresponding materials
        //
        OSG::UniformBufferObjChunkRefPtr ubo_material_database = create_material_database_state(materials);
                                         ubo_light_state       = create_light_state(lights);

        OSG::PolygonChunkRefPtr polygon_chunk = OSG::PolygonChunk::create();
        polygon_chunk->setFrontMode(GL_FILL);
        polygon_chunk->setBackMode(GL_FILL);
        polygon_chunk->setCullFace(GL_NONE);

        OSG::DepthChunkRefPtr depth_chunk = OSG::DepthChunk::create();
        depth_chunk->setEnable(true);

        OSG::ChunkMaterialRefPtr prog_state = OSG::ChunkMaterial::create();
        prog_state->addChunk(ubo_material_database, 1);  // buffer binding point 1
        prog_state->addChunk(ubo_light_state,       2);  // buffer binding point 2
        prog_state->addChunk(prog_chunk);
        prog_state->addChunk(polygon_chunk);
        prog_state->addChunk(depth_chunk);

        OSG::ShaderProgramVariableChunkRefPtr shader_var_chunk = OSG::ShaderProgramVariableChunk::create();
        shader_var_chunk->addUniformBlock("GeomState", 3);

        GeomState geom1; geom1.material_index = dist(generator);
        OSG::ChunkMaterialRefPtr geom1_state = OSG::ChunkMaterial::create();
        ubo_geom_state_1 = create_geometry_material_state(geom1);
        geom1_state->addChunk(ubo_geom_state_1, 3);     // buffer binding point 3
        geom1_state->addChunk(shader_var_chunk);        // block binding point

        GeomState geom2; geom2.material_index = dist(generator);
        OSG::ChunkMaterialRefPtr geom2_state = OSG::ChunkMaterial::create();
        ubo_geom_state_2 = create_geometry_material_state(geom2);
        geom2_state->addChunk(ubo_geom_state_2, 3);     // buffer binding point 3
        geom1_state->addChunk(shader_var_chunk);        // block binding point
       
        cylgeo  ->setMaterial(geom1_state);
        torusgeo->setMaterial(geom2_state);

        OSG::MaterialChunkOverrideGroupRefPtr mgrp = OSG::MaterialChunkOverrideGroup::create();
        mgrp->setMaterial(prog_state);
        scene->setCore(mgrp);

        OSG::commitChanges();
    
        mgr->setRoot(scene);
    
        // show the whole scene
        mgr->showAll();
    }

    // GLUT main loop
    glutMainLoop();

    return 0;
}
//
// Initialize GLUT & OpenSG and set up the scene
//
int main(int argc, char **argv)
{
    // OSG init
    OSG::osgInit(argc,argv);

    // GLUT init
    int winid = setupGLUT(&argc, argv);

    // open a new scope, because the pointers below should go out of scope
    // before entering glutMainLoop.
    // Otherwise OpenSG will complain about objects being alive after shutdown.
    {
        // the connection between GLUT and OpenSG
        OSG::GLUTWindowRefPtr gwin = OSG::GLUTWindow::create();
        gwin->setGlutId(winid);
        gwin->init();
    
        // create the SimpleSceneManager helper
        mgr = OSG::SimpleSceneManager::create();
        mgr->setWindow(gwin);

        // create a pretty simple graph: a Group with two Transforms as children,
        // each of which carries a single Geometry.
        
        // The scene
        
        OSG::NodeRefPtr  scene = OSG::Node::create();
        
        // The cylinder and its transformation
        OSG::NodeRefPtr     cyl    = OSG::Node::create();
        OSG::GeometryRefPtr cylgeo = OSG::makeCylinderGeo( 1.4f, .3f, 24, 
                                                           true, true, true );
        
        cyl->setCore(cylgeo);
    
        cyltrans = OSG::Transform::create();
    
        OSG::NodeRefPtr cyltransnode = OSG::Node::create();
        cyltransnode->setCore (cyltrans);
        cyltransnode->addChild(cyl     );
        
        // add it to the scene
        scene->addChild(cyltransnode);
        
        // The torus and its transformation
        OSG::NodeRefPtr     torus    = OSG::Node::create();
        OSG::GeometryRefPtr torusgeo = OSG::makeTorusGeo( .2f, 1, 24, 36 );
        
        torus->setCore(torusgeo);
            
        tortrans = OSG::Transform::create();
    
        OSG::NodeRefPtr tortransnode = OSG::Node::create();
        tortransnode->setCore (tortrans);
        tortransnode->addChild(torus   );
        
        // add it to the scene
        scene->addChild(tortransnode);

        //
        // create the shader program
        //
        OSG::ShaderProgramChunkRefPtr prog_chunk = OSG::ShaderProgramChunk::create();
        OSG::ShaderProgramRefPtr      vertShader = OSG::ShaderProgram::createVertexShader();
        OSG::ShaderProgramRefPtr      fragShader = OSG::ShaderProgram::createFragmentShader();

        vertShader->setProgram(get_vp_program());
        fragShader->setProgram(get_fp_program());

        //
        // binding the shader storage block to a buffer binding point can be performed 
        // either by calling the shaders's addShaderStorageBlock method or by
        // adding a 'buffer block' variable to a ShaderProgramVariableChunk.
        // In the following we use both variants for illustration.
        //
        fragShader->addShaderStorageBlock("ExampleBlock", 1); // block binding point

        prog_chunk->addShader(vertShader);
        prog_chunk->addShader(fragShader);

        //
        // create shader storage buffer object for block 'ExampleBlock'
        //
        OSG::MultiPropertySSBOChunkRefPtr ssbo_example_block = create_example_block_state();

        OSG::PolygonChunkRefPtr polygon_chunk = OSG::PolygonChunk::create();
        polygon_chunk->setFrontMode(GL_FILL);
        polygon_chunk->setBackMode(GL_FILL);
        polygon_chunk->setCullFace(GL_NONE);

        OSG::DepthChunkRefPtr depth_chunk = OSG::DepthChunk::create();
        depth_chunk->setEnable(true);

        OSG::ChunkMaterialRefPtr prog_state = OSG::ChunkMaterial::create();
        prog_state->addChunk(ssbo_example_block, 1);      // buffer binding point 1
        prog_state->addChunk(prog_chunk);
        prog_state->addChunk(polygon_chunk);
        prog_state->addChunk(depth_chunk);

        OSG::MaterialChunkOverrideGroupRefPtr mgrp = OSG::MaterialChunkOverrideGroup::create();
        mgrp->setMaterial(prog_state);
        scene->setCore(mgrp);

        OSG::commitChanges();
    
        mgr->setRoot(scene);
    
        // show the whole scene
        mgr->showAll();
    }

    // GLUT main loop
    glutMainLoop();

    return 0;
}