Ejemplo n.º 1
0
// Functor supplies triangles to things like IntersectionVisitor, ComputeBoundsVisitor, etc.
void
TileDrawable::accept(osg::PrimitiveFunctor& f) const
{
    const osg::Vec3Array& verts   = *static_cast<osg::Vec3Array*>(_geom->getVertexArray());
    const osg::Vec3Array& normals = *static_cast<osg::Vec3Array*>(_geom->getNormalArray());
        
#if 1 // triangles (OSG-stats-friendly)

    //TODO: improve by caching the entire Vec3f, not just the height.

    f.begin(GL_TRIANGLES);
    for(int t=0; t<_tileSize-1; ++t)
    {
        for(int s=0; s<_tileSize-1; ++s)
        {
            int i00 = t*_tileSize + s;
            int i10 = i00 + 1;
            int i01 = i00 + _tileSize;
            int i11 = i01 + 1;
            
            osg::Vec3d v01 = verts[i01] + normals[i01] * _heightCache[i01];
            osg::Vec3d v10 = verts[i10] + normals[i10] * _heightCache[i10];

            f.vertex( verts[i00] + normals[i00] * _heightCache[i00] );
            f.vertex( v01 );
            f.vertex( v10 );
            
            f.vertex( v10 );
            f.vertex( v01 );
            f.vertex( verts[i11] + normals[i11] * _heightCache[i11] );
        }
    }
    f.end();

#else
    // triangle-strips (faster? but not stats-friendly; will cause the OSG stats
    // to report _tileSize-1 primitive sets per TileDrawable even though there
    // is only one.

    for(int t=0; t<_tileSize-1; ++t)
    {
        f.begin( GL_TRIANGLE_STRIP );

        for(int s=0; s<_tileSize; ++s)
        {
            int i = t*_tileSize + s;
            f.vertex( verts[i] + normals[i] * _heightCache[i] );

            i += _tileSize;
            f.vertex( verts[i] + normals[i] * _heightCache[i] );
        }

        f.end();
    }

#endif
}
Ejemplo n.º 2
0
// Functor supplies triangles to things like IntersectionVisitor, ComputeBoundsVisitor, etc.
void
TileDrawable::accept(osg::PrimitiveFunctor& f) const
{        
#if 1 // triangles (OSG-stats-friendly)
    //TODO: improve by caching the entire Vec3f, not just the height.
    
    f.begin(GL_TRIANGLES);
    for(int t=0; t<_tileSize-1; ++t)
    {
        for(int s=0; s<_tileSize-1; ++s)
        {
            int i00 = t*_tileSize + s;
            int i10 = i00 + 1;
            int i01 = i00 + _tileSize;
            int i11 = i01 + 1;

            f.vertex(_mesh[i00]);  f.vertex(_mesh[i01]);  f.vertex(_mesh[i10]);
            f.vertex(_mesh[i10]);  f.vertex(_mesh[i01]);  f.vertex(_mesh[i11]);
        }
    }

    f.end();

#else
    // triangle-strips (faster? but not stats-friendly; will cause the OSG stats
    // to report _tileSize-1 primitive sets per TileDrawable even though there
    // is only one.

    for(int t=0; t<_tileSize-1; ++t)
    {
        f.begin( GL_TRIANGLE_STRIP );

        for(int s=0; s<_tileSize; ++s)
        {
            int i = t*_tileSize + s;
            f.vertex( _mesh[i] );

            i += _tileSize;
            f.vertex( _mesh[i] );
        }

        f.end();
    }

#endif
}
Ejemplo n.º 3
0
void
TileDrawable::accept(osg::PrimitiveFunctor& f) const
{
    if ( !_elevationRaster.valid() )
        return;

    const osg::Vec3Array* verts   = static_cast<osg::Vec3Array*>(_geom->getVertexArray());
    const osg::Vec3Array* normals = static_cast<osg::Vec3Array*>(_geom->getNormalArray());

    ImageUtils::PixelReader elevation(_elevationRaster.get());

    float
        scaleU = _elevationScaleBias(0,0),
        scaleV = _elevationScaleBias(1,1),
        biasU  = _elevationScaleBias(3,0),
        biasV  = _elevationScaleBias(3,1);    
    
    for(int t=0; t<_tileSize-1; ++t)
    {
        float v  = (float)t     / (float)(_tileSize-1);
        float v1 = (float)(t+1) / (float)(_tileSize-1);

        f.begin( GL_QUAD_STRIP );

        for(int s=0; s<_tileSize; ++s)
        {
            float u = (float)s / (float)(_tileSize-1);

            int index = t*_tileSize + s;
            {
                const osg::Vec3f& vert   = (*verts)[index];
                const osg::Vec3f& normal = (*normals)[index];
                float h = elevation(u*scaleU+biasU, v*scaleV+biasV).r();
                f.vertex( vert + normal*h );
            }

            index += _tileSize;
            {
                const osg::Vec3f& vert = (*verts)[index];
                const osg::Vec3f& normal = (*normals)[index];
                float h = elevation(u*scaleU+biasU, v1*scaleV+biasV).r();
                f.vertex( vert + normal*h );
            }
        }

        f.end();
    }
}
Ejemplo n.º 4
0
void
TileDrawable::accept(osg::PrimitiveFunctor& f) const
{
    const osg::Vec3Array* verts   = static_cast<osg::Vec3Array*>(_geom->getVertexArray());
    const osg::Vec3Array* normals = static_cast<osg::Vec3Array*>(_geom->getNormalArray());

    if ( _elevationRaster.valid() )
    {
        ImageUtils::PixelReader elevation(_elevationRaster.get());
        elevation.setBilinear(true);

        float
            scaleU = _elevationScaleBias(0,0),
            scaleV = _elevationScaleBias(1,1),
            biasU  = _elevationScaleBias(3,0),
            biasV  = _elevationScaleBias(3,1);

        //float
        //    texelScale = (float)(_elevationRaster->s()-1)/(float)_elevationRaster->s(),
        //    texelBias  = 0.5f/(float)(_elevationRaster->s());

        if ( osg::equivalent(scaleU, 0.0f) || osg::equivalent(scaleV, 0.0f) )
        {
            OE_WARN << LC << "Precision loss in tile " << _key.str() << "\n";
        }
    
        for(int t=0; t<_tileSize-1; ++t)
        {
            float v0 = (float)t     / (float)(_tileSize-1);
            float v1 = (float)(t+1) / (float)(_tileSize-1);

            v0 = v0*scaleV + biasV;
            v1 = v1*scaleV + biasV;

            f.begin( GL_QUAD_STRIP );

            for(int s=0; s<_tileSize; ++s)
            {
                float u = (float)s / (float)(_tileSize-1);
                
                u = u*scaleU + biasU;

                int index = t*_tileSize + s;
                {
                    const osg::Vec3f& vert   = (*verts)[index];
                    const osg::Vec3f& normal = (*normals)[index];
                    float h = elevation(u, v0).r();
                    f.vertex( vert + normal*h );
                }

                index += _tileSize;
                {
                    const osg::Vec3f& vert = (*verts)[index];
                    const osg::Vec3f& normal = (*normals)[index];
                    float h = elevation(u, v1).r();
                    f.vertex( vert + normal*h );
                }
            }

            f.end();
        }
    }

    // no elevation
    else
    {
        for(int t=0; t<_tileSize-1; ++t)
        {
            f.begin( GL_QUAD_STRIP );

            for(int s=0; s<_tileSize; ++s)
            {
                int index = t*_tileSize + s;
                f.vertex( (*verts)[index] );
                f.vertex( (*verts)[index + _tileSize] );
            }

            f.end();
        }
    }
}