void SoFCUnifiedSelection::applySettings()
{
float transparency;
ParameterGrp::handle hGrp = Gui::WindowParameter::getDefaultParameter()->GetGroup("View");
bool enablePre = hGrp->GetBool("EnablePreselection", true);
bool enableSel = hGrp->GetBool("EnableSelection", true);
if (!enablePre) {
this->highlightMode = SoFCUnifiedSelection::OFF;
}
else {
// Search for a user defined value with the current color as default
SbColor highlightColor = this->colorHighlight.getValue();
unsigned long highlight = (unsigned long)(highlightColor.getPackedValue());
highlight = hGrp->GetUnsigned("HighlightColor", highlight);
highlightColor.setPackedValue((uint32_t)highlight, transparency);
this->colorHighlight.setValue(highlightColor);
}
if (!enableSel) {
this->selectionMode = SoFCUnifiedSelection::OFF;
}
else {
// Do the same with the selection color
SbColor selectionColor = this->colorSelection.getValue();
unsigned long selection = (unsigned long)(selectionColor.getPackedValue());
selection = hGrp->GetUnsigned("SelectionColor", selection);
selectionColor.setPackedValue((uint32_t)selection, transparency);
this->colorSelection.setValue(selectionColor);
}
}
Gui::SoFCSelection* ViewProviderPoints::createFromSettings() const
{
Gui::SoFCSelection* sel = new Gui::SoFCSelection();
float transparency;
ParameterGrp::handle hGrp = Gui::WindowParameter::getDefaultParameter()->GetGroup("View");
bool enablePre = hGrp->GetBool("EnablePreselection", true);
bool enableSel = hGrp->GetBool("EnableSelection", true);
if (!enablePre) {
sel->highlightMode = Gui::SoFCSelection::OFF;
}
else {
// Search for a user defined value with the current color as default
SbColor highlightColor = sel->colorHighlight.getValue();
unsigned long highlight = (unsigned long)(highlightColor.getPackedValue());
highlight = hGrp->GetUnsigned("HighlightColor", highlight);
highlightColor.setPackedValue((uint32_t)highlight, transparency);
sel->colorHighlight.setValue(highlightColor);
}
if (!enableSel || !Selectable.getValue()) {
sel->selectionMode = Gui::SoFCSelection::SEL_OFF;
}
else {
// Do the same with the selection color
SbColor selectionColor = sel->colorSelection.getValue();
unsigned long selection = (unsigned long)(selectionColor.getPackedValue());
selection = hGrp->GetUnsigned("SelectionColor", selection);
selectionColor.setPackedValue((uint32_t)selection, transparency);
sel->colorSelection.setValue(selectionColor);
}
return sel;
}
void ImpExpDxfRead::setOptions(void)
{
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath(getOptionSource().c_str());
optionGroupLayers = hGrp->GetBool("groupLayers",false);
optionImportAnnotations = hGrp->GetBool("dxftext",false);
optionScaling = hGrp->GetFloat("dxfScaling",1.0);
}
DraftDxfRead::DraftDxfRead(std::string filepath, App::Document *pcDoc) : CDxfRead(filepath.c_str())
{
document = pcDoc;
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/Mod/Draft");
optionGroupLayers = hGrp->GetBool("groupLayers",false);
optionImportAnnotations = hGrp->GetBool("dxftext",false);
optionScaling = hGrp->GetFloat("dxfScaling",1.0);
}
void ImpExpDxfWrite::setOptions(void)
{
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath(getOptionSource().c_str());
optionMaxLength = hGrp->GetFloat("maxsegmentlength",5.0);
optionExpPoints = hGrp->GetBool("ExportPoints",false);
m_version = hGrp->GetInt("DxfVersionOut",14);
optionPolyLine = hGrp->GetBool("DiscretizeEllipses",false);
m_polyOverride = hGrp->GetBool("DiscretizeEllipses",false);
setDataDir(App::Application::getResourceDir() + "Mod/Import/DxfPlate/");
}
void MacroManager::run(MacroType eType,const char *sName)
{
try {
ParameterGrp::handle hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("OutputWindow");
PyObject* pyout = hGrp->GetBool("RedirectPythonOutput") ? new OutputStdout : 0;
PyObject* pyerr = hGrp->GetBool("RedirectPythonErrors") ? new OutputStderr : 0;
PythonRedirector std_out("stdout",pyout);
PythonRedirector std_err("stderr",pyerr);
//The given path name is expected to be Utf-8
Base::Interpreter().runFile(sName, true);
}
catch (const Base::SystemExitException&) {
Base::PyGILStateLocker lock;
PyErr_Clear();
Base::Interpreter().systemExit();
}
catch (const Base::PyException& e) {
Base::Console().Error("%s%s: %s\n",
e.getStackTrace().c_str(), e.getErrorType().c_str(), e.what());
}
catch (const Base::Exception& e) {
qWarning("%s",e.what());
}
}
void Gui::ActiveObjectList::setObject(App::DocumentObject* obj, const char* name, const Gui::HighlightMode& mode)
{
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/TreeView");
bool autoExpand = hGrp->GetBool("TreeActiveAutoExpand", true);
if (hasObject(name)) {
App::DocumentObject* act = getObject<App::DocumentObject*>(name);
Gui::Document* doc = Application::Instance->getDocument(act->getDocument());
Gui::ViewProviderDocumentObject* viewProvider = static_cast
<Gui::ViewProviderDocumentObject*>(doc->getViewProvider(act));
doc->signalHighlightObject(*viewProvider, mode, false);
if (autoExpand)
doc->signalExpandObject(*viewProvider, Gui::Collapse);
}
if (obj) {
Gui::Document* doc = Application::Instance->getDocument(obj->getDocument());
Gui::ViewProviderDocumentObject* viewProvider = static_cast
<Gui::ViewProviderDocumentObject*>(doc->getViewProvider(obj));
doc->signalHighlightObject(*viewProvider, mode, true);
if (autoExpand)
doc->signalExpandObject(*viewProvider, Gui::Expand);
_ObjectMap[name] = obj;
}
else {
if (hasObject(name))
_ObjectMap.erase(name);
}
}
void ShowRestoreInformationLayer(SketcherGui::ViewProviderSketch* vp, char * visibleelementname)
{
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/Mod/Sketcher/General");
bool status = hGrp->GetBool(visibleelementname, true);
hGrp->SetBool(visibleelementname, !status);
vp->showRestoreInformationLayer();
}
DrawingView::DrawingView(Gui::Document* doc, QWidget* parent)
: Gui::MDIView(doc, parent), m_view(new SvgView)
{
m_backgroundAction = new QAction(tr("&Background"), this);
m_backgroundAction->setEnabled(false);
m_backgroundAction->setCheckable(true);
m_backgroundAction->setChecked(true);
connect(m_backgroundAction, SIGNAL(toggled(bool)), m_view, SLOT(setViewBackground(bool)));
m_outlineAction = new QAction(tr("&Outline"), this);
m_outlineAction->setEnabled(false);
m_outlineAction->setCheckable(true);
m_outlineAction->setChecked(false);
connect(m_outlineAction, SIGNAL(toggled(bool)), m_view, SLOT(setViewOutline(bool)));
m_nativeAction = new QAction(tr("&Native"), this);
m_nativeAction->setCheckable(true);
m_nativeAction->setChecked(false);
#ifndef QT_NO_OPENGL
m_glAction = new QAction(tr("&OpenGL"), this);
m_glAction->setCheckable(true);
#endif
m_imageAction = new QAction(tr("&Image"), this);
m_imageAction->setCheckable(true);
#ifndef QT_NO_OPENGL
m_highQualityAntialiasingAction = new QAction(tr("&High Quality Antialiasing"), this);
m_highQualityAntialiasingAction->setEnabled(false);
m_highQualityAntialiasingAction->setCheckable(true);
m_highQualityAntialiasingAction->setChecked(false);
connect(m_highQualityAntialiasingAction, SIGNAL(toggled(bool)),
m_view, SLOT(setHighQualityAntialiasing(bool)));
#endif
QActionGroup *rendererGroup = new QActionGroup(this);
rendererGroup->addAction(m_nativeAction);
#ifndef QT_NO_OPENGL
rendererGroup->addAction(m_glAction);
#endif
rendererGroup->addAction(m_imageAction);
connect(rendererGroup, SIGNAL(triggered(QAction *)),
this, SLOT(setRenderer(QAction *)));
setCentralWidget(m_view);
//setWindowTitle(tr("SVG Viewer"));
m_orientation = QPrinter::Landscape;
m_pageSize = QPrinter::A4;
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath
("User parameter:BaseApp/Preferences/View");
bool on = hGrp->GetBool("InvertZoom", true);
m_view->setZoomInverted(on);
}
bool ViewProviderPartExt::loadParameter()
{
bool changed = false;
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath
("User parameter:BaseApp/Preferences/Mod/Part");
float deviation = hGrp->GetFloat("MeshDeviation",0.2);
bool novertexnormals = hGrp->GetBool("NoPerVertexNormals",false);
bool qualitynormals = hGrp->GetBool("QualityNormals",false);
if (Deviation.getValue() != deviation) {
Deviation.setValue(deviation);
changed = true;
}
if (this->noPerVertexNormals != novertexnormals) {
this->noPerVertexNormals = novertexnormals;
changed = true;
}
if (this->qualityNormals != qualitynormals) {
this->qualityNormals = qualitynormals;
changed = true;
}
return changed;
}
DockWindowItems* StdWorkbench::setupDockWindows() const
{
DockWindowItems* root = new DockWindowItems();
root->addDockWidget("Std_ToolBox", Qt::RightDockWidgetArea, false, false);
//root->addDockWidget("Std_HelpView", Qt::RightDockWidgetArea, true, false);
root->addDockWidget("Std_TreeView", Qt::LeftDockWidgetArea, true, false);
root->addDockWidget("Std_PropertyView", Qt::LeftDockWidgetArea, true, false);
root->addDockWidget("Std_SelectionView", Qt::LeftDockWidgetArea, false, false);
root->addDockWidget("Std_CombiView", Qt::LeftDockWidgetArea, false, false);
root->addDockWidget("Std_ReportView", Qt::BottomDockWidgetArea, true, true);
root->addDockWidget("Std_PythonView", Qt::BottomDockWidgetArea, true, true);
//Dagview through parameter.
ParameterGrp::handle group = App::GetApplication().GetUserParameter().
GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("DAGView");
bool enabled = group->GetBool("Enabled", false);
if (enabled)
root->addDockWidget("Std_DAGView", Qt::RightDockWidgetArea, false, false);
return root;
}
void MacroManager::run(MacroType eType, const char *sName)
{
Q_UNUSED(eType);
try {
ParameterGrp::handle hGrp = App::GetApplication().GetUserParameter()
.GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("OutputWindow");
PyObject* pyout = hGrp->GetBool("RedirectPythonOutput",true) ? new OutputStdout : 0;
PyObject* pyerr = hGrp->GetBool("RedirectPythonErrors",true) ? new OutputStderr : 0;
PythonRedirector std_out("stdout",pyout);
PythonRedirector std_err("stderr",pyerr);
//The given path name is expected to be Utf-8
Base::Interpreter().runFile(sName, this->localEnv);
}
catch (const Base::SystemExitException&) {
throw;
}
catch (const Base::PyException& e) {
e.ReportException();
}
catch (const Base::Exception& e) {
qWarning("%s",e.what());
}
}
void Gui::GUIApplicationNativeEventAware::importSettings()
{
ParameterGrp::handle group = App::GetApplication().GetUserParameter().GetGroup("BaseApp")->GetGroup("Spaceball")->GetGroup("Motion");
// here I import settings from a dialog. For now they are set as is
bool dominant = group->GetBool("Dominant"); // Is dominant checked
bool flipXY = group->GetBool("FlipYZ");; // Is Flip X/Y checked
float generalSensitivity = convertPrefToSensitivity(group->GetInt("GlobalSensitivity"));
// array that has stored info about "Enabled" checkboxes of all axes
bool enabled[6];
enabled[0] = group->GetBool("Translations", true) && group->GetBool("PanLREnable", true);
enabled[1] = group->GetBool("Translations", true) && group->GetBool("PanUDEnable", true);
enabled[2] = group->GetBool("Translations", true) && group->GetBool("ZoomEnable", true);
enabled[3] = group->GetBool("Rotations", true) && group->GetBool("TiltEnable", true);
enabled[4] = group->GetBool("Rotations", true) && group->GetBool("RollEnable", true);
enabled[5] = group->GetBool("Rotations", true) && group->GetBool("SpinEnable", true);
// array that has stored info about "Reversed" checkboxes of all axes
bool reversed[6];
reversed[0] = group->GetBool("PanLRReverse");
reversed[1] = group->GetBool("PanUDReverse");
reversed[2] = group->GetBool("ZoomReverse");
reversed[3] = group->GetBool("TiltReverse");
reversed[4] = group->GetBool("RollReverse");
reversed[5] = group->GetBool("SpinReverse");
// array that has stored info about sliders - on each slider you need to use method DlgSpaceballSettings::GetValuefromSlider
// which will convert <-50, 50> linear integers from slider to <0.1, 10> exponential floating values
float sensitivity[6];
sensitivity[0] = convertPrefToSensitivity(group->GetInt("PanLRSensitivity"));
sensitivity[1] = convertPrefToSensitivity(group->GetInt("PanUDSensitivity"));
sensitivity[2] = convertPrefToSensitivity(group->GetInt("ZoomSensitivity"));
sensitivity[3] = convertPrefToSensitivity(group->GetInt("TiltSensitivity"));
sensitivity[4] = convertPrefToSensitivity(group->GetInt("RollSensitivity"));
sensitivity[5] = convertPrefToSensitivity(group->GetInt("SpinSensitivity"));
if (group->GetBool("Calibrate"))
{
group->SetInt("CalibrationX",motionDataArray[0]);
group->SetInt("CalibrationY",motionDataArray[1]);
group->SetInt("CalibrationZ",motionDataArray[2]);
group->SetInt("CalibrationXr",motionDataArray[3]);
group->SetInt("CalibrationYr",motionDataArray[4]);
group->SetInt("CalibrationZr",motionDataArray[5]);
group->RemoveBool("Calibrate");
return;
}
else
{
motionDataArray[0] = motionDataArray[0] - group->GetInt("CalibrationX");
motionDataArray[1] = motionDataArray[1] - group->GetInt("CalibrationY");
motionDataArray[2] = motionDataArray[2] - group->GetInt("CalibrationZ");
motionDataArray[3] = motionDataArray[3] - group->GetInt("CalibrationXr");
motionDataArray[4] = motionDataArray[4] - group->GetInt("CalibrationYr");
motionDataArray[5] = motionDataArray[5] - group->GetInt("CalibrationZr");
}
int i;
if (flipXY) {
bool tempBool;
float tempFloat;
tempBool = enabled[1];
enabled[1] = enabled[2];
enabled[2] = tempBool;
tempBool = enabled[4];
enabled[4] = enabled[5];
enabled[5] = tempBool;
tempBool = reversed[1];
reversed[1] = reversed[2];
reversed[2] = tempBool;
tempBool = reversed[4];
reversed[4] = reversed[5];
reversed[5] = tempBool;
tempFloat = sensitivity[1];
sensitivity[1] = sensitivity[2];
sensitivity[2] = tempFloat;
tempFloat = sensitivity[4];
sensitivity[4] = sensitivity[5];
sensitivity[5] = tempFloat;
i = motionDataArray[1];
motionDataArray[1] = motionDataArray[2];
motionDataArray[2] = - i;
i = motionDataArray[4];
motionDataArray[4] = motionDataArray[5];
motionDataArray[5] = - i;
}
if (dominant) { // if dominant is checked
int max = 0;
bool flag = false;
for (i = 0; i < 6; ++i) {
if (abs(motionDataArray[i]) > abs(max)) max = motionDataArray[i];
}
for (i = 0; i < 6; ++i) {
if ((motionDataArray[i] != max) || (flag)) {
motionDataArray[i] = 0;
} else if (motionDataArray[i] == max) {
flag = true;
}
}
}
for (i = 0; i < 6; ++i) {
if (motionDataArray[i] != 0) {
if (enabled[i] == false)
motionDataArray[i] = 0;
else {
if (reversed[i] == true)
motionDataArray[i] = - motionDataArray[i];
motionDataArray[i] = (int)((float)(motionDataArray[i]) * sensitivity[i] * generalSensitivity);
}
}
}
}
void TaskCheckGeometryResults::goCheck()
{
Gui::WaitCursor wc;
int selectedCount(0), checkedCount(0), invalidShapes(0);
std::vector<Gui::SelectionSingleton::SelObj> selection = Gui::Selection().getSelection();
std::vector<Gui::SelectionSingleton::SelObj>::iterator it;
ResultEntry *theRoot = new ResultEntry();
for (it = selection.begin(); it != selection.end(); ++it)
{
selectedCount++;
Part::Feature *feature = dynamic_cast<Part::Feature *>((*it).pObject);
if (!feature)
continue;
currentSeparator = Gui::Application::Instance->activeDocument()->getViewProvider(feature)->getRoot();
if (!currentSeparator)
continue;
TopoDS_Shape shape = feature->Shape.getValue();
QString baseName;
QTextStream baseStream(&baseName);
baseStream << (*it).DocName;
baseStream << "." << (*it).FeatName;
if (strlen((*it).SubName) > 0)
{
shape = feature->Shape.getShape().getSubShape((*it).SubName);
baseStream << "." << (*it).SubName;
}
if (shape.IsNull())
continue;
checkedCount++;
checkedMap.Clear();
buildShapeContent(baseName, shape);
BRepCheck_Analyzer shapeCheck(shape);
if (!shapeCheck.IsValid())
{
invalidShapes++;
ResultEntry *entry = new ResultEntry();
entry->parent = theRoot;
entry->shape = shape;
entry->name = baseName;
entry->type = shapeEnumToString(shape.ShapeType());
entry->error = QObject::tr("Invalid");
entry->viewProviderRoot = currentSeparator;
entry->viewProviderRoot->ref();
goSetupResultBoundingBox(entry);
theRoot->children.push_back(entry);
recursiveCheck(shapeCheck, shape, entry);
continue; //don't run BOPAlgo_ArgumentAnalyzer if BRepCheck_Analyzer finds something.
}
else
{
//BOPAlgo_ArgumentAnalyzer can be really slow!
//so only run it when the shape seems valid to BRepCheck_Analyzer And
//when the option is set.
ParameterGrp::handle group = App::GetApplication().GetUserParameter().
GetGroup("BaseApp")->GetGroup("Preferences")->GetGroup("Mod")->GetGroup("Part")->GetGroup("CheckGeometry");
bool runSignal = group->GetBool("RunBOPCheck", false);
//for now, user has edit the config file to turn it on.
//following line ensures that the config file has the setting.
group->SetBool("RunBOPCheck", runSignal);
if (runSignal)
invalidShapes += goBOPSingleCheck(shape, theRoot, baseName);
}
}
model->setResults(theRoot);
treeView->expandAll();
treeView->header()->resizeSections(QHeaderView::ResizeToContents);
QString aMessage;
QTextStream aStream(&aMessage);
aStream << checkedCount << " processed out of " << selectedCount << " selected\n";
aStream << invalidShapes << " invalid shapes.";
message->setText(aMessage);
Gui::Selection().clearSelection();
}
void CmdSketcherToggleConstruction::activated(int iMsg)
{
Q_UNUSED(iMsg);
// Option A: nothing is selected change creation mode from/to construction
if(Gui::Selection().countObjectsOfType(Sketcher::SketchObject::getClassTypeId()) == 0){
Gui::CommandManager &rcCmdMgr = Gui::Application::Instance->commandManager();
if (geometryCreationMode == Construction) {
geometryCreationMode = Normal;
}
else {
geometryCreationMode = Construction;
}
rcCmdMgr.updateCommands("ToggleConstruction", static_cast<int>(geometryCreationMode));
}
else // there was a selection, so operate in toggle mode.
{
// get the selection
std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
// only one sketch with its subelements are allowed to be selected
if (selection.size() != 1) {
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
QObject::tr("Select edge(s) from the sketch."));
return;
}
// get the needed lists and objects
const std::vector<std::string> &SubNames = selection[0].getSubNames();
if (SubNames.empty()) {
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
QObject::tr("Select edge(s) from the sketch."));
return;
}
// undo command open
openCommand("Toggle draft from/to draft");
// go through the selected subelements
for (std::vector<std::string>::const_iterator it=SubNames.begin();it!=SubNames.end();++it){
// only handle edges
if (it->size() > 4 && it->substr(0,4) == "Edge") {
int GeoId = std::atoi(it->substr(4,4000).c_str()) - 1;
// issue the actual commands to toggle
doCommand(Doc,"App.ActiveDocument.%s.toggleConstruction(%d) ",selection[0].getFeatName(),GeoId);
}
}
// finish the transaction and update
commitCommand();
ParameterGrp::handle hGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/Mod/Sketcher");
bool autoRecompute = hGrp->GetBool("AutoRecompute",false);
if(autoRecompute) // toggling does not modify the DoF of the solver, however it may affect features depending on the sketch
Gui::Command::updateActive();
// clear the selection (convenience)
getSelection().clearSelection();
}
}
void StdCmdDownloadOnlineHelp::activated(int iMsg)
{
if (!wget->isDownloading()) {
ParameterGrp::handle hGrp = App::GetApplication().GetUserParameter().GetGroup("BaseApp");
hGrp = hGrp->GetGroup("Preferences")->GetGroup("OnlineHelp");
std::string url = hGrp->GetASCII("DownloadURL", "www.freecadweb.org/wiki/");
std::string prx = hGrp->GetASCII("ProxyText", "");
bool bUseProxy = hGrp->GetBool ("UseProxy", false);
bool bAuthor = hGrp->GetBool ("Authorize", false);
if (bUseProxy) {
QString username = QString::null;
QString password = QString::null;
if (bAuthor) {
QDialog dlg(getMainWindow());
dlg.setModal(true);
Ui_DlgAuthorization ui;
ui.setupUi(&dlg);
if (dlg.exec() == QDialog::Accepted) {
username = ui.username->text();
password = ui.password->text();
}
}
wget->setProxy(QString::fromAscii(prx.c_str()), username, password);
}
int loop=3;
bool canStart = false;
// set output directory
QString path = QString::fromUtf8(App::GetApplication().GetHomePath());
path += QString::fromAscii("/doc/");
ParameterGrp::handle hURLGrp = App::GetApplication().GetParameterGroupByPath("User parameter:BaseApp/Preferences/OnlineHelp");
path = QString::fromUtf8(hURLGrp->GetASCII( "DownloadLocation", path.toAscii() ).c_str());
while (loop > 0) {
loop--;
QFileInfo fi( path);
if (!fi.exists()) {
if (QMessageBox::critical(getMainWindow(), tr("Non-existing directory"),
tr("The directory '%1' does not exist.\n\n"
"Do you want to specify an existing directory?").arg(fi.filePath()),
QMessageBox::Yes|QMessageBox::Default, QMessageBox::No|QMessageBox::Escape) !=
QMessageBox::Yes)
{
// exit the command
return;
}
else
{
path = FileDialog::getExistingDirectory();
if ( path.isEmpty() )
return;
}
}
if (!fi.permission( QFile::WriteUser)) {
if (QMessageBox::critical(getMainWindow(), tr("Missing permission"),
tr("You don't have write permission to '%1'\n\n"
"Do you want to specify another directory?").arg(fi.filePath()),
QMessageBox::Yes|QMessageBox::Default, QMessageBox::No|QMessageBox::Escape) !=
QMessageBox::Yes)
{
// exit the command
return;
}
else {
path = FileDialog::getExistingDirectory();
if ( path.isEmpty() )
return;
}
}
else {
wget->setOutputDirectory( path );
canStart = true;
break;
}
}
if (canStart) {
bool ok = wget->startDownload(QString::fromAscii(url.c_str()));
if ( ok == false )
Base::Console().Error("The tool 'wget' couldn't be found. Please check your installation.");
else if ( wget->isDownloading() && _pcAction )
_pcAction->setText(tr("Stop downloading"));
}
}
else // kill the process now
{
wget->abort();
}
}