Ejemplo n.º 1
0
    TER doApply () override
    {
        // Divvy if source or destination is non-native or if there are paths.
        std::uint32_t const uTxFlags = mTxn.getFlags ();
        bool const partialPaymentAllowed = uTxFlags & tfPartialPayment;
        bool const limitQuality = uTxFlags & tfLimitQuality;
        bool const defaultPathsAllowed = !(uTxFlags & tfNoDivvyDirect);
        bool const bPaths = mTxn.isFieldPresent (sfPaths);
        bool const bMax = mTxn.isFieldPresent (sfSendMax);
        AccountID const uDstAccountID (mTxn.getFieldAccount160 (sfDestination));
        STAmount const saDstAmount (mTxn.getFieldAmount (sfAmount));
        STAmount maxSourceAmount;
        if (bMax)
            maxSourceAmount = mTxn.getFieldAmount (sfSendMax);
        else if (saDstAmount.native ())
            maxSourceAmount = saDstAmount;
        else
          maxSourceAmount = STAmount (
              {saDstAmount.getCurrency (), mTxnAccountID},
              saDstAmount.mantissa(), saDstAmount.exponent (),
              saDstAmount < zero);

        m_journal.trace <<
            "maxSourceAmount=" << maxSourceAmount.getFullText () <<
            " saDstAmount=" << saDstAmount.getFullText ();

        // Open a ledger for editing.
        auto const index = getAccountRootIndex (uDstAccountID);
        SLE::pointer sleDst (mEngine->view().entryCache (ltACCOUNT_ROOT, index));

        if (!sleDst)
        {
            // Destination account does not exist.
            if (!saDstAmount.native ())
            {
                m_journal.trace <<
                    "Delay transaction: Destination account does not exist.";

                // Another transaction could create the account and then this
                // transaction would succeed.
                return tecNO_DST;
            }
            else if (mParams & tapOPEN_LEDGER && partialPaymentAllowed)
            {
                // You cannot fund an account with a partial payment.
                // Make retry work smaller, by rejecting this.
                m_journal.trace <<
                    "Delay transaction: Partial payment not allowed to create account.";


                // Another transaction could create the account and then this
                // transaction would succeed.
                return telNO_DST_PARTIAL;
            }
            else if (saDstAmount < STAmount (mEngine->getLedger ()->getReserve (0)))
            {
                // getReserve() is the minimum amount that an account can have.
                // Reserve is not scaled by load.
                m_journal.trace <<
                    "Delay transaction: Destination account does not exist. " <<
                    "Insufficent payment to create account.";

                // TODO: dedupe
                // Another transaction could create the account and then this
                // transaction would succeed.
                return tecNO_DST_INSUF_XDV;
            }

            // Create the account.
            sleDst = std::make_shared<SLE>(ltACCOUNT_ROOT,
                getAccountRootIndex (uDstAccountID));
            sleDst->setFieldAccount (sfAccount, uDstAccountID);
            sleDst->setFieldU32 (sfSequence, 1);
            mEngine->view().entryCreate(sleDst);
        }
        else if ((sleDst->getFlags () & lsfRequireDestTag) &&
                 !mTxn.isFieldPresent (sfDestinationTag))
        {
            // The tag is basically account-specific information we don't
            // understand, but we can require someone to fill it in.

            // We didn't make this test for a newly-formed account because there's
            // no way for this field to be set.
            m_journal.trace << "Malformed transaction: DestinationTag required.";

            return tecDST_TAG_NEEDED;
        }
        else
        {
            // Tell the engine that we are intending to change the the destination
            // account.  The source account gets always charged a fee so it's always
            // marked as modified.
            mEngine->view().entryModify (sleDst);
        }

        TER terResult;

        bool const bDivvy = bPaths || bMax || !saDstAmount.native ();
        // XXX Should bMax be sufficient to imply divvy?

        if (bDivvy)
        {
            // Divvy payment with at least one intermediate step and uses
            // transitive balances.

            // Copy paths into an editable class.
            STPathSet spsPaths = mTxn.getFieldPathSet (sfPaths);

            try
            {
                path::DivvyCalc::Input rcInput;
                rcInput.partialPaymentAllowed = partialPaymentAllowed;
                rcInput.defaultPathsAllowed = defaultPathsAllowed;
                rcInput.limitQuality = limitQuality;
                rcInput.deleteUnfundedOffers = true;
                rcInput.isLedgerOpen = static_cast<bool>(mParams & tapOPEN_LEDGER);

                bool pathTooBig = spsPaths.size () > MaxPathSize;

                for (auto const& path : spsPaths)
                    if (path.size () > MaxPathLength)
                        pathTooBig = true;

                if (rcInput.isLedgerOpen && pathTooBig)
                {
                    terResult = telBAD_PATH_COUNT; // Too many paths for proposed ledger.
                }
                else
                {

                    path::DivvyCalc::Output rc;
                    {
                        ScopedDeferCredits g (mEngine->view ());
                        rc = path::DivvyCalc::divvyCalculate (
                            mEngine->view (),
                            maxSourceAmount,
                            saDstAmount,
                            uDstAccountID,
                            mTxnAccountID,
                            spsPaths,
                            &rcInput);
                    }

                    // TODO: is this right?  If the amount is the correct amount, was
                    // the delivered amount previously set?
                    if (rc.result () == tesSUCCESS && rc.actualAmountOut != saDstAmount)
                        mEngine->view ().setDeliveredAmount (rc.actualAmountOut);

                    terResult = rc.result ();
                }

                // TODO(tom): what's going on here?
                if (isTerRetry (terResult))
                    terResult = tecPATH_DRY;

            }
            catch (std::exception const& e)
            {
                m_journal.trace <<
                    "Caught throw: " << e.what ();

                terResult = tefEXCEPTION;
            }
        }
        else
        {
            // Direct XDV payment.

            // uOwnerCount is the number of entries in this legder for this
            // account that require a reserve.
            auto const uOwnerCount = mTxnAccount->getFieldU32 (sfOwnerCount);

            // This is the total reserve in drops.
            std::uint64_t const uReserve =
                mEngine->getLedger ()->getReserve (uOwnerCount);

            // mPriorBalance is the balance on the sending account BEFORE the
            // fees were charged. We want to make sure we have enough reserve
            // to send. Allow final spend to use reserve for fee.
            auto const mmm = std::max(mTxn.getTransactionFee (),
                STAmount (uReserve));

            if (mPriorBalance < saDstAmount + mmm)
            {
                // Vote no. However the transaction might succeed, if applied in
                // a different order.
                m_journal.trace << "Delay transaction: Insufficient funds: " <<
                    " " << mPriorBalance.getText () <<
                    " / " << (saDstAmount + mmm).getText () <<
                    " (" << uReserve << ")";

                terResult = tecUNFUNDED_PAYMENT;
            }
            else
            {
                // The source account does have enough money, so do the
                // arithmetic for the transfer and make the ledger change.
                mTxnAccount->setFieldAmount (sfBalance,
                    mSourceBalance - saDstAmount);
                sleDst->setFieldAmount (sfBalance,
                    sleDst->getFieldAmount (sfBalance) + saDstAmount);

                // Re-arm the password change fee if we can and need to.
                if ((sleDst->getFlags () & lsfPasswordSpent))
                    sleDst->clearFlag (lsfPasswordSpent);

                terResult = tesSUCCESS;
            }
        }

        std::string strToken;
        std::string strHuman;

        if (transResultInfo (terResult, strToken, strHuman))
        {
            m_journal.trace <<
                strToken << ": " << strHuman;
        }
        else
        {
            assert (false);
        }

        return terResult;
    }
Ejemplo n.º 2
0
    TER doApply () override
    {
        assert (mTxnAccount);

        // A ticket counts against the reserve of the issuing account, but we check
        // the starting balance because we want to allow dipping into the reserve to
        // pay fees.
        auto const accountReserve (mEngine->getLedger ()->getReserve (
            mTxnAccount->getFieldU32 (sfOwnerCount) + 1));

        if (mPriorBalance.getNValue () < accountReserve)
            return tecINSUFFICIENT_RESERVE;

        std::uint32_t expiration (0);

        if (mTxn.isFieldPresent (sfExpiration))
        {
            expiration = mTxn.getFieldU32 (sfExpiration);

            if (!expiration)
            {
                m_journal.warning <<
                    "Malformed ticket requestion: bad expiration";

                return temBAD_EXPIRATION;
            }

            if (mEngine->getLedger ()->getParentCloseTimeNC () >= expiration)
                return tesSUCCESS;
        }

        SLE::pointer sleTicket = mEngine->entryCreate (ltTICKET,
            Ledger::getTicketIndex (mTxnAccountID, mTxn.getSequence ()));

        sleTicket->setFieldAccount (sfAccount, mTxnAccountID);
        sleTicket->setFieldU32 (sfSequence, mTxn.getSequence ());

        if (expiration != 0)
            sleTicket->setFieldU32 (sfExpiration, expiration);

        if (mTxn.isFieldPresent (sfTarget))
        {
            Account const target_account (mTxn.getFieldAccount160 (sfTarget));

            SLE::pointer sleTarget = mEngine->entryCache (ltACCOUNT_ROOT,
                Ledger::getAccountRootIndex (target_account));

            // Destination account does not exist.
            if (!sleTarget)
                return tecNO_TARGET;

            // The issuing account is the default account to which the ticket
            // applies so don't bother saving it if that's what's specified.
            if (target_account != mTxnAccountID)
                sleTicket->setFieldAccount (sfTarget, target_account);
        }

        std::uint64_t hint;

        auto describer = [&](SLE::pointer p, bool b)
        {
            Ledger::ownerDirDescriber(p, b, mTxnAccountID);
        };
        TER result = mEngine->view ().dirAdd (
            hint,
            Ledger::getOwnerDirIndex (mTxnAccountID),
            sleTicket->getIndex (),
            describer);

        m_journal.trace <<
            "Creating ticket " << to_string (sleTicket->getIndex ()) <<
            ": " << transHuman (result);

        if (result != tesSUCCESS)
            return result;

        sleTicket->setFieldU64(sfOwnerNode, hint);

        // If we succeeded, the new entry counts agains the creator's reserve.
        mEngine->view ().incrementOwnerCount (mTxnAccount);

        return result;
    }
Ejemplo n.º 3
0
TER
CreateOffer::doApply ()
{
    if (m_journal.debug) m_journal.debug <<
        "OfferCreate> " << mTxn.getJson (0);

    std::uint32_t const uTxFlags = mTxn.getFlags ();

    bool const bPassive (uTxFlags & tfPassive);
    bool const bImmediateOrCancel (uTxFlags & tfImmediateOrCancel);
    bool const bFillOrKill (uTxFlags & tfFillOrKill);
    bool const bSell  (uTxFlags & tfSell);

    STAmount saTakerPays = mTxn.getFieldAmount (sfTakerPays);
    STAmount saTakerGets = mTxn.getFieldAmount (sfTakerGets);

    if (!saTakerPays.isLegalNet () || !saTakerGets.isLegalNet ())
        return temBAD_AMOUNT;

    auto const& uPaysIssuerID = saTakerPays.getIssuer ();
    auto const& uPaysCurrency = saTakerPays.getCurrency ();

    auto const& uGetsIssuerID = saTakerGets.getIssuer ();
    auto const& uGetsCurrency = saTakerGets.getCurrency ();

    bool const bHaveExpiration (mTxn.isFieldPresent (sfExpiration));
    bool const bHaveCancel (mTxn.isFieldPresent (sfOfferSequence));

    std::uint32_t const uExpiration = mTxn.getFieldU32 (sfExpiration);
    std::uint32_t const uCancelSequence = mTxn.getFieldU32 (sfOfferSequence);

    // FIXME understand why we use SequenceNext instead of current transaction
    //       sequence to determine the transaction. Why is the offer seuqnce
    //       number insufficient?

    std::uint32_t const uAccountSequenceNext = mTxnAccount->getFieldU32 (sfSequence);
    std::uint32_t const uSequence = mTxn.getSequence ();

    const uint256 uLedgerIndex = Ledger::getOfferIndex (mTxnAccountID, uSequence);

    if (m_journal.debug)
    {
        m_journal.debug <<
            "Creating offer node: " << to_string (uLedgerIndex) <<
            " uSequence=" << uSequence;

        if (bImmediateOrCancel)
            m_journal.debug << "Transaction: IoC set.";

        if (bFillOrKill)
            m_journal.debug << "Transaction: FoK set.";
    }

    // This is the original rate of this offer, and is the rate at which it will
    // be placed, even if crossing offers change the amounts.
    std::uint64_t const uRate = STAmount::getRate (saTakerGets, saTakerPays);

    TER terResult (tesSUCCESS);

    // This is the ledger view that we work against. Transactions are applied
    // as we go on processing transactions.
    core::LedgerView& view (mEngine->view ());

    // This is a checkpoint with just the fees paid. If something goes wrong
    // with this transaction, we roll back to this ledger.
    core::LedgerView view_checkpoint (view);

    view.bumpSeq (); // Begin ledger variance.

    SLE::pointer sleCreator = mEngine->entryCache (
        ltACCOUNT_ROOT, Ledger::getAccountRootIndex (mTxnAccountID));

    if (uTxFlags & tfOfferCreateMask)
    {
        if (m_journal.debug) m_journal.debug <<
            "Malformed transaction: Invalid flags set.";

        terResult = temINVALID_FLAG;
    }
    else if (bImmediateOrCancel && bFillOrKill)
    {
        if (m_journal.debug) m_journal.debug <<
            "Malformed transaction: both IoC and FoK set.";

        terResult = temINVALID_FLAG;
    }
    else if (bHaveExpiration && !uExpiration)
    {
        m_journal.warning <<
            "Malformed offer: bad expiration";

        terResult = temBAD_EXPIRATION;
    }
    else if (saTakerPays.isNative () && saTakerGets.isNative ())
    {
        m_journal.warning <<
            "Malformed offer: XRP for XRP";

        terResult = temBAD_OFFER;
    }
    else if (saTakerPays <= zero || saTakerGets <= zero)
    {
        m_journal.warning <<
            "Malformed offer: bad amount";

        terResult = temBAD_OFFER;
    }
    else if (uPaysCurrency == uGetsCurrency && uPaysIssuerID == uGetsIssuerID)
    {
        m_journal.warning <<
            "Malformed offer: redundant offer";

        terResult = temREDUNDANT;
    }
    // We don't allow a non-native currency to use the currency code XRP.
    else if (badCurrency() == uPaysCurrency || badCurrency() == uGetsCurrency)
    {
        m_journal.warning <<
            "Malformed offer: Bad currency.";

        terResult = temBAD_CURRENCY;
    }
    else if (saTakerPays.isNative () != !uPaysIssuerID ||
             saTakerGets.isNative () != !uGetsIssuerID)
    {
        m_journal.warning <<
            "Malformed offer: bad issuer";

        terResult = temBAD_ISSUER;
    }
    else if (view.isGlobalFrozen (uPaysIssuerID) || view.isGlobalFrozen (uGetsIssuerID))
    {
        m_journal.warning <<
            "Offer involves frozen asset";

        terResult = tecFROZEN;
    }
    else if (view.accountFunds (
        mTxnAccountID, saTakerGets, fhZERO_IF_FROZEN) <= zero)
    {
        m_journal.warning <<
            "delay: Offers must be at least partially funded.";

        terResult = tecUNFUNDED_OFFER;
    }
    // This can probably be simplified to make sure that you cancel sequences
    // before the transaction sequence number.
    else if (bHaveCancel && (!uCancelSequence || uAccountSequenceNext - 1 <= uCancelSequence))
    {
        if (m_journal.debug) m_journal.debug <<
            "uAccountSequenceNext=" << uAccountSequenceNext <<
            " uOfferSequence=" << uCancelSequence;

        terResult = temBAD_SEQUENCE;
    }

    if (terResult != tesSUCCESS)
    {
        if (m_journal.debug) m_journal.debug <<
            "final terResult=" << transToken (terResult);

        return terResult;
    }

    // Process a cancellation request that's passed along with an offer.
    if ((terResult == tesSUCCESS) && bHaveCancel)
    {
        uint256 const uCancelIndex (
            Ledger::getOfferIndex (mTxnAccountID, uCancelSequence));
        SLE::pointer sleCancel = mEngine->entryCache (ltOFFER, uCancelIndex);

        // It's not an error to not find the offer to cancel: it might have
        // been consumed or removed as we are processing.
        if (sleCancel)
        {
            m_journal.warning <<
                "Cancelling order with sequence " << uCancelSequence;

            terResult = view.offerDelete (sleCancel);
        }
    }

    // Expiration is defined in terms of the close time of the parent ledger,
    // because we definitively know the time that it closed but we do not
    // know the closing time of the ledger that is under construction.
    if (bHaveExpiration &&
        (mEngine->getLedger ()->getParentCloseTimeNC () >= uExpiration))
    {
        return tesSUCCESS;
    }

    // Make sure that we are authorized to hold what the taker will pay us.
    if (terResult == tesSUCCESS && !saTakerPays.isNative ())
        terResult = checkAcceptAsset (Issue (uPaysCurrency, uPaysIssuerID));

    bool crossed = false;
    bool const bOpenLedger (mParams & tapOPEN_LEDGER);

    if (terResult == tesSUCCESS)
    {
        // We reverse gets and pays because during offer crossing we are taking.
        core::Amounts const taker_amount (saTakerGets, saTakerPays);

        // The amount of the offer that we will need to place, after we finish
        // offer crossing processing. It may be equal to the original amount,
        // empty (fully crossed), or something in-between.
        core::Amounts place_offer;

        std::tie(terResult, place_offer) = crossOffers (view, taker_amount);

        if (terResult == tecFAILED_PROCESSING && bOpenLedger)
            terResult = telFAILED_PROCESSING;

        if (terResult == tesSUCCESS)
        {
            // We now need to reduce the offer by the cross flow. We reverse
            // in and out here, since during crossing we were takers.
            assert (saTakerPays.getCurrency () == place_offer.out.getCurrency ());
            assert (saTakerPays.getIssuer () == place_offer.out.getIssuer ());
            assert (saTakerGets.getCurrency () == place_offer.in.getCurrency ());
            assert (saTakerGets.getIssuer () == place_offer.in.getIssuer ());

            if (taker_amount != place_offer)
                crossed = true;

            if (m_journal.debug)
            {
                m_journal.debug << "Offer Crossing: " << transToken (terResult);

                if (terResult == tesSUCCESS)
                {
                    m_journal.debug <<
                        "    takerPays: " << saTakerPays.getFullText () <<
                        " -> " << place_offer.out.getFullText ();
                    m_journal.debug <<
                        "    takerGets: " << saTakerGets.getFullText () <<
                        " -> " << place_offer.in.getFullText ();
                }
            }

            saTakerPays = place_offer.out;
            saTakerGets = place_offer.in;
        }
    }

    if (terResult != tesSUCCESS)
    {
        m_journal.debug <<
            "final terResult=" << transToken (terResult);

        return terResult;
    }

    if (m_journal.debug)
    {
        m_journal.debug <<
            "takeOffers: saTakerPays=" <<saTakerPays.getFullText ();
        m_journal.debug <<
            "takeOffers: saTakerGets=" << saTakerGets.getFullText ();
        m_journal.debug <<
            "takeOffers: mTxnAccountID=" <<
            to_string (mTxnAccountID);
        m_journal.debug <<
            "takeOffers:         FUNDS=" << view.accountFunds (
            mTxnAccountID, saTakerGets, fhZERO_IF_FROZEN).getFullText ();
    }

    if (saTakerPays < zero || saTakerGets < zero)
    {
        // Earlier, we verified that the amounts, as specified in the offer,
        // were not negative. That they are now suggests that something went
        // very wrong with offer crossing.
        m_journal.fatal << (crossed ? "Partially consumed" : "Full") <<
            " offer has negative component:" <<
            " pays=" << saTakerPays.getFullText () <<
            " gets=" << saTakerGets.getFullText ();

        assert (saTakerPays >= zero);
        assert (saTakerGets >= zero);
        return tefINTERNAL;
    }

    if (bFillOrKill && (saTakerPays != zero || saTakerGets != zero))
    {
        // Fill or kill and have leftovers.
        view.swapWith (view_checkpoint); // Restore with just fees paid.
        return tesSUCCESS;
    }

    // What the reserve would be if this offer was placed.
    auto const accountReserve (mEngine->getLedger ()->getReserve (
        sleCreator->getFieldU32 (sfOwnerCount) + 1));

    if (saTakerPays == zero ||                // Wants nothing more.
        saTakerGets == zero ||                // Offering nothing more.
        bImmediateOrCancel)                   // Do not persist.
    {
        // Complete as is.
    }
    else if (mPriorBalance.getNValue () < accountReserve)
    {
        // If we are here, the signing account had an insufficient reserve
        // *prior* to our processing. We use the prior balance to simplify
        // client writing and make the user experience better.

        if (bOpenLedger) // Ledger is not final, can vote no.
        {
            // Hope for more reserve to come in or more offers to consume. If we
            // specified a local error this transaction will not be retried, so
            // specify a tec to distribute the transaction and allow it to be
            // retried. In particular, it may have been successful to a
            // degree (partially filled) and if it hasn't, it might succeed.
            terResult = tecINSUF_RESERVE_OFFER;
        }
        else if (!crossed)
        {
            // Ledger is final, insufficent reserve to create offer, processed
            // nothing.
            terResult = tecINSUF_RESERVE_OFFER;
        }
        else
        {
            // Ledger is final, insufficent reserve to create offer, processed
            // something.

            // Consider the offer unfunded. Treat as tesSUCCESS.
        }
    }
    else
    {
        assert (saTakerPays > zero);
        assert (saTakerGets > zero);

        // We need to place the remainder of the offer into its order book.
        if (m_journal.debug) m_journal.debug <<
            "offer not fully consumed:" <<
            " saTakerPays=" << saTakerPays.getFullText () <<
            " saTakerGets=" << saTakerGets.getFullText ();

        std::uint64_t uOwnerNode;
        std::uint64_t uBookNode;
        uint256 uDirectory;

        // Add offer to owner's directory.
        terResult = view.dirAdd (uOwnerNode,
            Ledger::getOwnerDirIndex (mTxnAccountID), uLedgerIndex,
            std::bind (
                &Ledger::ownerDirDescriber, std::placeholders::_1,
                std::placeholders::_2, mTxnAccountID));

        if (tesSUCCESS == terResult)
        {
            // Update owner count.
            view.ownerCountAdjust (mTxnAccountID, 1, sleCreator);

            uint256 const uBookBase (Ledger::getBookBase (
                {{uPaysCurrency, uPaysIssuerID},
                    {uGetsCurrency, uGetsIssuerID}}));

            if (m_journal.debug) m_journal.debug <<
                "adding to book: " << to_string (uBookBase) <<
                " : " << saTakerPays.getHumanCurrency () <<
                "/" << to_string (saTakerPays.getIssuer ()) <<
                " -> " << saTakerGets.getHumanCurrency () <<
                "/" << to_string (saTakerGets.getIssuer ());

            // We use the original rate to place the offer.
            uDirectory = Ledger::getQualityIndex (uBookBase, uRate);

            // Add offer to order book.
            terResult = view.dirAdd (uBookNode, uDirectory, uLedgerIndex,
                std::bind (
                    &Ledger::qualityDirDescriber, std::placeholders::_1,
                    std::placeholders::_2, saTakerPays.getCurrency (),
                    uPaysIssuerID, saTakerGets.getCurrency (),
                    uGetsIssuerID, uRate));
        }

        if (tesSUCCESS == terResult)
        {
            if (m_journal.debug)
            {
                m_journal.debug <<
                    "sfAccount=" <<
                    to_string (mTxnAccountID);
                m_journal.debug <<
                    "uPaysIssuerID=" <<
                    to_string (uPaysIssuerID);
                m_journal.debug <<
                    "uGetsIssuerID=" <<
                    to_string (uGetsIssuerID);
                m_journal.debug <<
                    "saTakerPays.isNative()=" <<
                    saTakerPays.isNative ();
                m_journal.debug <<
                    "saTakerGets.isNative()=" <<
                    saTakerGets.isNative ();
                m_journal.debug <<
                    "uPaysCurrency=" <<
                    saTakerPays.getHumanCurrency ();
                m_journal.debug <<
                    "uGetsCurrency=" <<
                    saTakerGets.getHumanCurrency ();
            }

            SLE::pointer sleOffer (mEngine->entryCreate (ltOFFER, uLedgerIndex));

            sleOffer->setFieldAccount (sfAccount, mTxnAccountID);
            sleOffer->setFieldU32 (sfSequence, uSequence);
            sleOffer->setFieldH256 (sfBookDirectory, uDirectory);
            sleOffer->setFieldAmount (sfTakerPays, saTakerPays);
            sleOffer->setFieldAmount (sfTakerGets, saTakerGets);
            sleOffer->setFieldU64 (sfOwnerNode, uOwnerNode);
            sleOffer->setFieldU64 (sfBookNode, uBookNode);

            if (uExpiration)
                sleOffer->setFieldU32 (sfExpiration, uExpiration);

            if (bPassive)
                sleOffer->setFlag (lsfPassive);

            if (bSell)
                sleOffer->setFlag (lsfSell);

            if (m_journal.debug) m_journal.debug <<
                "final terResult=" << transToken (terResult) <<
                " sleOffer=" << sleOffer->getJson (0);
        }
    }

    if (terResult != tesSUCCESS)
    {
        m_journal.debug <<
            "final terResult=" << transToken (terResult);
    }

    return terResult;
}
Ejemplo n.º 4
0
TER TransferTransactor::doApply ()
{
    WriteLog (lsTRACE, LedgerConsensus) << "Transfer transaction is applying\n\n\n\n\n\n";
    uint160 const uDstAccountID = mTxn.getFieldAccount160 (sfDestination);
    uint256 const objectId = mTxn.getObjectId ();
    WriteLog (lsTRACE, LedgerConsensus) << "Transfer transaction is applying";
    WriteLog (lsTRACE, LedgerConsensus) << "___________________________________applying";
    WriteLog (lsTRACE, LedgerConsensus) << "\n\n\n\n\n\n";


    WriteLog (lsTRACE, LedgerConsensus) << uDstAccountID;
    WriteLog (lsTRACE, LedgerConsensus) << objectId;


    if (!uDstAccountID)
    {
        m_journal.trace <<
            "Malformed transaction: Transfer destination account not specified.";

        return temDST_NEEDED;
    }
    WriteLog (lsTRACE, LedgerConsensus) << "Checking object in db \n\n\n\n\n\n";

    SLE::pointer sleObj (mEngine->entryCache (
        ltOWNERSHIP, objectId));
    WriteLog (lsTRACE, LedgerConsensus) << objectId << " \n\n\n\n\n\n";

    WriteLog (lsTRACE, LedgerConsensus) << "Checked object in db \n\n\n\n\n\n";
    WriteLog (lsTRACE, LedgerConsensus) << sleObj<< " \n\n\n\n\n\n";

    if (sleObj)
    {
        // Object  exists.
        WriteLog (lsTRACE, LedgerConsensus) << "Object  exists \n\n\n\n\n\n Source account";
        WriteLog (lsTRACE, LedgerConsensus) << mTxn.getSourceAccount().getAccountID();
        WriteLog (lsTRACE, LedgerConsensus) << "Object  exists \n\n\n\n\n\n New account";

        WriteLog (lsTRACE, LedgerConsensus) << uDstAccountID;


        if(sleObj->getFieldAccount160(sfAccount) != mTxn.getSourceAccount().getAccountID())
        {
            WriteLog (lsTRACE, LedgerConsensus) << "Not your object \n\n\n\n\n\n";
            return temMALFORMED;
        }

        SLE::pointer sleDst (mEngine->entryCache (
            ltACCOUNT_ROOT, Ledger::getAccountRootIndex (uDstAccountID)));

        if (!sleDst)
        {
            WriteLog (lsTRACE, LedgerConsensus) << "Destination account doesnt exist \n\n\n\n\n\n";
            return temMALFORMED;
        }



        sleObj->setFieldAccount (sfAccount, uDstAccountID);

        WriteLog (lsTRACE, LedgerConsensus) << "New dstAccount is set \n\n\n\n\n\n";

    }
    else
    {
        WriteLog (lsTRACE, LedgerConsensus) << "You cannot make Transfer to non-existing object \n\n\n\n\n\n";
        return temMALFORMED;
    }

    WriteLog (lsTRACE, LedgerConsensus) << "Transfer applying is finished \n\n\n\n\n\n";


    return tesSUCCESS;
}
Ejemplo n.º 5
0
    TER doApply () override
    {
        // Ripple if source or destination is non-native or if there are paths.
        std::uint32_t const uTxFlags = mTxn.getFlags ();
        bool const partialPaymentAllowed = uTxFlags & tfPartialPayment;
        bool const limitQuality = uTxFlags & tfLimitQuality;
        bool const defaultPathsAllowed = !(uTxFlags & tfNoRippleDirect);
        bool const bPaths = mTxn.isFieldPresent (sfPaths);
        bool const bMax = mTxn.isFieldPresent (sfSendMax);
        Account const uDstAccountID (mTxn.getFieldAccount160 (sfDestination));
        STAmount const saDstAmount (mTxn.getFieldAmount (sfAmount));
        STAmount maxSourceAmount;
        if (bMax)
            maxSourceAmount = mTxn.getFieldAmount (sfSendMax);
        else if (saDstAmount.isNative ())
            maxSourceAmount = saDstAmount;
        else
          maxSourceAmount = STAmount (
              {saDstAmount.getCurrency (), mTxnAccountID},
              saDstAmount.mantissa(), saDstAmount.exponent (),
              saDstAmount < zero);
        auto const& uSrcCurrency = maxSourceAmount.getCurrency ();
        auto const& uDstCurrency = saDstAmount.getCurrency ();

        // isZero() is XRP.  FIX!
        bool const bXRPDirect = uSrcCurrency.isZero () && uDstCurrency.isZero ();

        m_journal.trace <<
            "maxSourceAmount=" << maxSourceAmount.getFullText () <<
            " saDstAmount=" << saDstAmount.getFullText ();

        if (!isLegalNet (saDstAmount) || !isLegalNet (maxSourceAmount))
            return temBAD_AMOUNT;

        if (uTxFlags & tfPaymentMask)
        {
            m_journal.trace <<
                "Malformed transaction: Invalid flags set.";

            return temINVALID_FLAG;
        }
        else if (!uDstAccountID)
        {
            m_journal.trace <<
                "Malformed transaction: Payment destination account not specified.";

            return temDST_NEEDED;
        }
        else if (bMax && maxSourceAmount <= zero)
        {
            m_journal.trace <<
                "Malformed transaction: bad max amount: " << maxSourceAmount.getFullText ();

            return temBAD_AMOUNT;
        }
        else if (saDstAmount <= zero)
        {
            m_journal.trace <<
                "Malformed transaction: bad dst amount: " << saDstAmount.getFullText ();

            return temBAD_AMOUNT;
        }
        else if (badCurrency() == uSrcCurrency || badCurrency() == uDstCurrency)
        {
            m_journal.trace <<
                "Malformed transaction: Bad currency.";

            return temBAD_CURRENCY;
        }
        else if (mTxnAccountID == uDstAccountID && uSrcCurrency == uDstCurrency && !bPaths)
        {
            // You're signing yourself a payment.
            // If bPaths is true, you might be trying some arbitrage.
            m_journal.trace <<
                "Malformed transaction: Redundant transaction:" <<
                " src=" << to_string (mTxnAccountID) <<
                " dst=" << to_string (uDstAccountID) <<
                " src_cur=" << to_string (uSrcCurrency) <<
                " dst_cur=" << to_string (uDstCurrency);

            return temREDUNDANT;
        }
        else if (bMax && maxSourceAmount == saDstAmount &&
                 maxSourceAmount.getCurrency () == saDstAmount.getCurrency ())
        {
            // Consistent but redundant transaction.
            m_journal.trace <<
                "Malformed transaction: Redundant SendMax.";

            return temREDUNDANT_SEND_MAX;
        }
        else if (bXRPDirect && bMax)
        {
            // Consistent but redundant transaction.
            m_journal.trace <<
                "Malformed transaction: SendMax specified for XRP to XRP.";

            return temBAD_SEND_XRP_MAX;
        }
        else if (bXRPDirect && bPaths)
        {
            // XRP is sent without paths.
            m_journal.trace <<
                "Malformed transaction: Paths specified for XRP to XRP.";

            return temBAD_SEND_XRP_PATHS;
        }
        else if (bXRPDirect && partialPaymentAllowed)
        {
            // Consistent but redundant transaction.
            m_journal.trace <<
                "Malformed transaction: Partial payment specified for XRP to XRP.";

            return temBAD_SEND_XRP_PARTIAL;
        }
        else if (bXRPDirect && limitQuality)
        {
            // Consistent but redundant transaction.
            m_journal.trace <<
                "Malformed transaction: Limit quality specified for XRP to XRP.";

            return temBAD_SEND_XRP_LIMIT;
        }
        else if (bXRPDirect && !defaultPathsAllowed)
        {
            // Consistent but redundant transaction.
            m_journal.trace <<
                "Malformed transaction: No ripple direct specified for XRP to XRP.";

            return temBAD_SEND_XRP_NO_DIRECT;
        }

        //
        // Open a ledger for editing.
        auto const index = getAccountRootIndex (uDstAccountID);
        SLE::pointer sleDst (mEngine->entryCache (ltACCOUNT_ROOT, index));

        if (!sleDst)
        {
            // Destination account does not exist.
            if (!saDstAmount.isNative ())
            {
                m_journal.trace <<
                    "Delay transaction: Destination account does not exist.";

                // Another transaction could create the account and then this
                // transaction would succeed.
                return tecNO_DST;
            }
            else if (mParams & tapOPEN_LEDGER && partialPaymentAllowed)
            {
                // You cannot fund an account with a partial payment.
                // Make retry work smaller, by rejecting this.
                m_journal.trace <<
                    "Delay transaction: Partial payment not allowed to create account.";


                // Another transaction could create the account and then this
                // transaction would succeed.
                return telNO_DST_PARTIAL;
            }
            else if (saDstAmount.getNValue () < mEngine->getLedger ()->getReserve (0))
            {
                // getReserve() is the minimum amount that an account can have.
                // Reserve is not scaled by load.
                m_journal.trace <<
                    "Delay transaction: Destination account does not exist. " <<
                    "Insufficent payment to create account.";

                // TODO: dedupe
                // Another transaction could create the account and then this
                // transaction would succeed.
                return tecNO_DST_INSUF_XRP;
            }

            // Create the account.
            auto const newIndex = getAccountRootIndex (uDstAccountID);
            sleDst = mEngine->entryCreate (ltACCOUNT_ROOT, newIndex);
            sleDst->setFieldAccount (sfAccount, uDstAccountID);
            sleDst->setFieldU32 (sfSequence, 1);
        }
        else if ((sleDst->getFlags () & lsfRequireDestTag) &&
                 !mTxn.isFieldPresent (sfDestinationTag))
        {
            // The tag is basically account-specific information we don't
            // understand, but we can require someone to fill it in.

            // We didn't make this test for a newly-formed account because there's
            // no way for this field to be set.
            m_journal.trace << "Malformed transaction: DestinationTag required.";

            return tefDST_TAG_NEEDED;
        }
        else
        {
            // Tell the engine that we are intending to change the the destination
            // account.  The source account gets always charged a fee so it's always
            // marked as modified.
            mEngine->entryModify (sleDst);
        }

        TER terResult;

        bool const bRipple = bPaths || bMax || !saDstAmount.isNative ();
        // XXX Should bMax be sufficient to imply ripple?

        if (bRipple)
        {
            // Ripple payment with at least one intermediate step and uses
            // transitive balances.

            // Copy paths into an editable class.
            STPathSet spsPaths = mTxn.getFieldPathSet (sfPaths);

            try
            {
                path::RippleCalc::Input rcInput;
                rcInput.partialPaymentAllowed = partialPaymentAllowed;
                rcInput.defaultPathsAllowed = defaultPathsAllowed;
                rcInput.limitQuality = limitQuality;
                rcInput.deleteUnfundedOffers = true;
                rcInput.isLedgerOpen = static_cast<bool>(mParams & tapOPEN_LEDGER);

                bool pathTooBig = spsPaths.size () > MaxPathSize;

                for (auto const& path : spsPaths)
                    if (path.size () > MaxPathLength)
                        pathTooBig = true;

                if (rcInput.isLedgerOpen && pathTooBig)
                {
                    terResult = telBAD_PATH_COUNT; // Too many paths for proposed ledger.
                }
                else
                {
                    auto rc = path::RippleCalc::rippleCalculate (
                        mEngine->view (),
                        maxSourceAmount,
                        saDstAmount,
                        uDstAccountID,
                        mTxnAccountID,
                        spsPaths,
                        &rcInput);

                    // TODO: is this right?  If the amount is the correct amount, was
                    // the delivered amount previously set?
                    if (rc.result () == tesSUCCESS && rc.actualAmountOut != saDstAmount)
                        mEngine->view ().setDeliveredAmount (rc.actualAmountOut);

                    terResult = rc.result ();
                }

                // TODO(tom): what's going on here?
                if (isTerRetry (terResult))
                    terResult = tecPATH_DRY;

            }
            catch (std::exception const& e)
            {
                m_journal.trace <<
                    "Caught throw: " << e.what ();

                terResult = tefEXCEPTION;
            }
        }
        else
        {
            // Direct XRP payment.

            // uOwnerCount is the number of entries in this legder for this account
            // that require a reserve.

            std::uint32_t const uOwnerCount (mTxnAccount->getFieldU32 (sfOwnerCount));

            // This is the total reserve in drops.
            // TODO(tom): there should be a class for this.
            std::uint64_t const uReserve (mEngine->getLedger ()->getReserve (uOwnerCount));

            // mPriorBalance is the balance on the sending account BEFORE the fees were charged.
            //
            // Make sure have enough reserve to send. Allow final spend to use
            // reserve for fee.
            auto const mmm = std::max(uReserve, mTxn.getTransactionFee ().getNValue ());
            if (mPriorBalance < saDstAmount + mmm)
            {
                // Vote no.
                // However, transaction might succeed, if applied in a different order.
                m_journal.trace << "Delay transaction: Insufficient funds: " <<
                    " " << mPriorBalance.getText () <<
                    " / " << (saDstAmount + uReserve).getText () <<
                    " (" << uReserve << ")";

                terResult = tecUNFUNDED_PAYMENT;
            }
            else
            {
                // The source account does have enough money, so do the arithmetic
                // for the transfer and make the ledger change.
                mTxnAccount->setFieldAmount (sfBalance, mSourceBalance - saDstAmount);
                sleDst->setFieldAmount (sfBalance, sleDst->getFieldAmount (sfBalance) + saDstAmount);

                // Re-arm the password change fee if we can and need to.
                if ((sleDst->getFlags () & lsfPasswordSpent))
                    sleDst->clearFlag (lsfPasswordSpent);

                terResult = tesSUCCESS;
            }
        }

        std::string strToken;
        std::string strHuman;

        if (transResultInfo (terResult, strToken, strHuman))
        {
            m_journal.trace <<
                strToken << ": " << strHuman;
        }
        else
        {
            assert (false);
        }

        return terResult;
    }
Ejemplo n.º 6
0
TER PaymentTransactor::doApply ()
{
    // Ripple if source or destination is non-native or if there are paths.
    std::uint32_t const uTxFlags = mTxn.getFlags ();
	//bool const bPartialPayment = is_bit_set(uTxFlags, tfPartialPayment);
    bool const bLimitQuality = is_bit_set (uTxFlags, tfLimitQuality);
    bool const bNoRippleDirect = is_bit_set (uTxFlags, tfNoRippleDirect);
    bool const bPaths = mTxn.isFieldPresent (sfPaths);
    bool const bMax = mTxn.isFieldPresent (sfSendMax);
    uint160 const uDstAccountID = mTxn.getFieldAccount160 (sfDestination);
    STAmount const saDstAmount = mTxn.getFieldAmount (sfAmount);
    STAmount const saMaxAmount = bMax
                                   ? mTxn.getFieldAmount (sfSendMax)
                                   : saDstAmount.isNative ()
                                   ? saDstAmount
                                   : STAmount (saDstAmount.getCurrency (),
                                        mTxnAccountID,
                                        saDstAmount.getMantissa (),
                                        saDstAmount.getExponent (),
                                        saDstAmount < zero);
    uint160 const uSrcCurrency = saMaxAmount.getCurrency ();
    uint160 const uDstCurrency = saDstAmount.getCurrency ();
    bool const bSTRDirect = uSrcCurrency.isZero () && uDstCurrency.isZero ();

	
    m_journal.trace <<
        "saMaxAmount=" << saMaxAmount.getFullText () <<
        " saDstAmount=" << saDstAmount.getFullText ();

    if (!saDstAmount.isLegalNet () || !saMaxAmount.isLegalNet ())
        return temBAD_AMOUNT;

    if (uTxFlags & tfPaymentMask)
    {
        m_journal.trace <<
            "Malformed transaction: Invalid flags set.";

        return temINVALID_FLAG;
    }
    else if (!uDstAccountID)
    {
        m_journal.trace <<
            "Malformed transaction: Payment destination account not specified.";

        return temDST_NEEDED;
    }
    else if (bMax && saMaxAmount <= zero)
    {
        m_journal.trace <<
            "Malformed transaction: bad max amount: " << saMaxAmount.getFullText ();

        return temBAD_AMOUNT;
    }
    else if (saDstAmount <= zero)
    {
        m_journal.trace <<
            "Malformed transaction: bad dst amount: " << saDstAmount.getFullText ();

        return temBAD_AMOUNT;
    }
    else if (CURRENCY_BAD == uSrcCurrency || CURRENCY_BAD == uDstCurrency)
    {
        m_journal.trace <<
            "Malformed transaction: Bad currency.";

        return temBAD_CURRENCY;
    }
    else if (mTxnAccountID == uDstAccountID && uSrcCurrency == uDstCurrency && !bPaths)
    {
        m_journal.trace <<
            "Malformed transaction: Redundant transaction:" <<
            " src=" << to_string (mTxnAccountID) <<
            " dst=" << to_string (uDstAccountID) <<
            " src_cur=" << to_string (uSrcCurrency) <<
            " dst_cur=" << to_string (uDstCurrency);

        return temREDUNDANT;
    }
    else if (bMax && saMaxAmount == saDstAmount && saMaxAmount.getCurrency () == saDstAmount.getCurrency ())
    {
        m_journal.trace <<
            "Malformed transaction: Redundant SendMax.";

        return temREDUNDANT_SEND_MAX;
    }
    else if (bSTRDirect && bMax)
    {
        m_journal.trace <<
            "Malformed transaction: SendMax specified for STR to STR.";

        return temBAD_SEND_STR_MAX;
    }
    else if (bSTRDirect && bPaths)
    {
        m_journal.trace <<
            "Malformed transaction: Paths specified for STR to STR.";

        return temBAD_SEND_STR_PATHS;
    }
    else if (bSTRDirect && bLimitQuality)
    {
        m_journal.trace <<
            "Malformed transaction: Limit quality specified for STR to STR.";

        return temBAD_SEND_STR_LIMIT;
    }
    else if (bSTRDirect && bNoRippleDirect)
    {
        m_journal.trace <<
            "Malformed transaction: No ripple direct specified for STR to STR.";

        return temBAD_SEND_STR_NO_DIRECT;
    }

    SLE::pointer sleDst (mEngine->entryCache (
        ltACCOUNT_ROOT, Ledger::getAccountRootIndex (uDstAccountID)));

    if (!sleDst)
    {
        // Destination account does not exist.

        if (!saDstAmount.isNative ())
        {
            m_journal.trace <<
                "Delay transaction: Destination account does not exist.";

            // Another transaction could create the account and then this transaction would succeed.
            return tecNO_DST;
        }
        
        // Note: Reserve is not scaled by load.
        else if (saDstAmount.getNValue () < mEngine->getLedger ()->getReserve (0))
        {
            m_journal.trace <<
                "Delay transaction: Destination account does not exist. " <<
                "Insufficient payment to create account.";

            // Another transaction could create the account and then this
            // transaction would succeed.
            return tecNO_DST_INSUF_STR;
        }

        // Create the account.
        sleDst = mEngine->entryCreate (
            ltACCOUNT_ROOT, Ledger::getAccountRootIndex (uDstAccountID));

        sleDst->setFieldAccount (sfAccount, uDstAccountID);
        sleDst->setFieldU32 (sfSequence, 1);
    }
    else if ((sleDst->getFlags () & lsfRequireDestTag) && !mTxn.isFieldPresent (sfDestinationTag))
    {
        m_journal.trace <<
            "Malformed transaction: DestinationTag required.";

        return tefDST_TAG_NEEDED;
    }
    else
    {
        mEngine->entryModify (sleDst);
    }

    TER terResult;
    // XXX Should bMax be sufficient to imply ripple?
    bool const bRipple = bPaths || bMax || !saDstAmount.isNative ();

    if (bRipple)
    {
        // Ripple payment

        STPathSet spsPaths = mTxn.getFieldPathSet (sfPaths);
        std::vector<PathState::pointer> vpsExpanded;
        STAmount saMaxAmountAct;
        STAmount saDstAmountAct;

        try
        {
            bool const openLedger = is_bit_set (mParams, tapOPEN_LEDGER);
			bool tooManyPaths = false;
			if (spsPaths.size() > MAX_NUM_PATHS) tooManyPaths = true;
			else
			{
				for (auto const& path : spsPaths)
				{
					if (path.size() > MAX_PATH_SIZE)
					{
						tooManyPaths = true;
						break;
					}
				}
			}

			
			terResult = openLedger && tooManyPaths
				? telBAD_PATH_COUNT // Too many paths for proposed ledger.
				: RippleCalc::rippleCalc(
				mEngine->view(),
				saMaxAmountAct,
				saDstAmountAct,
				vpsExpanded,
				saMaxAmount,
				saDstAmount,
				uDstAccountID,
				mTxnAccountID,
				spsPaths,
				false,
				bLimitQuality,
				bNoRippleDirect, // Always compute for finalizing ledger.
				false, // Not standalone, delete unfundeds.
				is_bit_set(mParams, tapOPEN_LEDGER));

			if (isTerRetry(terResult))
				terResult = tecPATH_DRY;

			if ((tesSUCCESS == terResult) && (saDstAmountAct != saDstAmount))
				mEngine->view().setDeliveredAmount(saDstAmountAct);
			
        }
        catch (std::exception const& e)
        {
            m_journal.trace <<
                "Caught throw: " << e.what ();

            terResult   = tefEXCEPTION;
        }
    }
    else
    {
        // Direct STR payment.

        std::uint32_t const uOwnerCount (mTxnAccount->getFieldU32 (sfOwnerCount));
        std::uint64_t const uReserve (mEngine->getLedger ()->getReserve (uOwnerCount));

        // Make sure have enough reserve to send. Allow final spend to use reserve for fee.
        if (mPriorBalance < saDstAmount + std::max(uReserve, mTxn.getTransactionFee ().getNValue ()))
        {
            // Vote no. However, transaction might succeed, if applied in a different order.
            m_journal.trace << "Delay transaction: Insufficient funds: " <<
                " " << mPriorBalance.getText () <<
                " / " << (saDstAmount + uReserve).getText () <<
                " (" << uReserve << ")";

            terResult   = tecUNFUNDED_PAYMENT;
        }
        else
        {
            mTxnAccount->setFieldAmount (sfBalance, mSourceBalance - saDstAmount);
            sleDst->setFieldAmount (sfBalance, sleDst->getFieldAmount (sfBalance) + saDstAmount);


            terResult = tesSUCCESS;
        }
    }

    std::string strToken;
    std::string strHuman;

    if (transResultInfo (terResult, strToken, strHuman))
    {
        m_journal.trace <<
            strToken << ": " << strHuman;
    }
    else
    {
        assert (false);
    }

    return terResult;
}
Ejemplo n.º 7
0
TER WalletAddTransactor::doApply ()
{
    std::uint32_t const uTxFlags = mTxn.getFlags ();

    if (uTxFlags & tfUniversalMask)
    {
        m_journal.trace <<
            "Malformed transaction: Invalid flags set.";

        return temINVALID_FLAG;
    }

    Blob const vucPubKey    = mTxn.getFieldVL (sfPublicKey);
    Blob const vucSignature = mTxn.getFieldVL (sfSignature);

    uint160 const uAuthKeyID (mTxn.getFieldAccount160 (sfRegularKey));
    RippleAddress const naMasterPubKey (
        RippleAddress::createAccountPublic (vucPubKey));
    uint160 const uDstAccountID (naMasterPubKey.getAccountID ());

    // FIXME: This should be moved to the transaction's signature check logic and cached
	if (!naMasterPubKey.verifySignature(
        Serializer::getSHA512Half (uAuthKeyID.begin (), uAuthKeyID.size ()), 
        vucSignature))
    {
        m_journal.trace <<
            "Unauthorized: bad signature ";
        return tefBAD_ADD_AUTH;
    }

    SLE::pointer sleDst (mEngine->entryCache (
        ltACCOUNT_ROOT, Ledger::getAccountRootIndex (uDstAccountID)));

    if (sleDst)
    {
        m_journal.trace <<
            "account already created";
        return tefCREATED;
    }

    // Direct STR payment.

    STAmount saDstAmount = mTxn.getFieldAmount (sfAmount);
    STAmount saPaid = mTxn.getTransactionFee ();
    STAmount const saSrcBalance = mTxnAccount->getFieldAmount (sfBalance);
    std::uint32_t const uOwnerCount = mTxnAccount->getFieldU32 (sfOwnerCount);
    std::uint64_t const uReserve = mEngine->getLedger ()->getReserve (uOwnerCount);
    

    // Make sure have enough reserve to send. Allow final spend to use reserve
    // for fee.
    // Note: Reserve is not scaled by fee.
    if (saSrcBalance + saPaid < saDstAmount + uReserve)
    {
        // Vote no. However, transaction might succeed, if applied in a
        // different order.
        m_journal.trace <<
            "Delay transaction: Insufficient funds: %s / %s (%d)" <<
            saSrcBalance.getText () << " / " <<
            (saDstAmount + uReserve).getText () << " with reserve = " <<
            uReserve;
        return tecUNFUNDED_ADD;
    }

    // Deduct initial balance from source account.
    mTxnAccount->setFieldAmount (sfBalance, saSrcBalance - saDstAmount);

    // Create the account.
    sleDst  = mEngine->entryCreate (ltACCOUNT_ROOT,
        Ledger::getAccountRootIndex (uDstAccountID));

    sleDst->setFieldAccount (sfAccount, uDstAccountID);
    sleDst->setFieldU32 (sfSequence, 1);
    sleDst->setFieldAmount (sfBalance, saDstAmount);
    sleDst->setFieldAccount (sfRegularKey, uAuthKeyID);

    return tesSUCCESS;
}