Ejemplo n.º 1
0
void adjointInput::JacobianXbeta(double t, SiconosVector& xvalue, SP::SiconosMatrix JacXbeta)
{


  JacXbeta->setValue(0, 0, 0.0) ;
  JacXbeta->setValue(0, 1, -1.0 / 2.0) ;
  JacXbeta->setValue(1, 0, 1.0 / 2.0) ;
  JacXbeta->setValue(1, 1, 0.0) ;
#ifdef SICONOS_DEBUG
  std::cout << "JacXbeta\n" << std::endl;;
  JacXbeta->display();
#endif

}
Ejemplo n.º 2
0
             itindex != bc->velocityIndices()->end();
             ++itindex)
        {
          // (nslawSize,sizeDS));
          SP::SiconosVector coltmp(new SiconosVector(nslawSize));
          coltmp->zero();
          leftInteractionBlock->setCol(*itindex, *coltmp);
        }
      }
      DEBUG_PRINT("leftInteractionBlock after application of boundary conditions\n");
      DEBUG_EXPR(leftInteractionBlock->display(););
      // (inter1 == inter2)
      SP::SiconosMatrix work(new SimpleMatrix(*leftInteractionBlock));
      work->trans();
      SP::SiconosMatrix centralInteractionBlock = getOSIMatrix(Osi, ds);
      DEBUG_EXPR(centralInteractionBlock->display(););
      DEBUG_EXPR_WE(std::cout <<  std::boolalpha << " centralInteractionBlock->isPLUFactorized() = "<< centralInteractionBlock->isPLUFactorized() << std::endl;);
      centralInteractionBlock->PLUForwardBackwardInPlace(*work);
      //*currentInteractionBlock +=  *leftInteractionBlock ** work;
      DEBUG_EXPR(work->display(););
      prod(*leftInteractionBlock, *work, *currentInteractionBlock, false);
      //      gemm(CblasNoTrans,CblasNoTrans,1.0,*leftInteractionBlock,*work,1.0,*currentInteractionBlock);
      //*currentInteractionBlock *=h;
      DEBUG_EXPR(currentInteractionBlock->display(););
      assert(currentInteractionBlock->isSymmetric(1e-10));


    }
    else RuntimeException::selfThrow("LinearOSNS::computeInteractionBlock not yet implemented for relation of type " + relationType);
    // Set pos for next loop.
    pos = pos2;
double D1MinusLinearOSI::computeResiduHalfExplicitAccelerationLevel()
{
  DEBUG_BEGIN("\n D1MinusLinearOSI::computeResiduHalfExplicitAccelerationLevel()\n");

  double t = _simulation->nextTime(); // end of the time step
  double told = _simulation->startingTime(); // beginning of the time step
  double h = _simulation->timeStep(); // time step length

  SP::OneStepNSProblems allOSNS  = _simulation->oneStepNSProblems(); // all OSNSP
  SP::Topology topo =  _simulation->nonSmoothDynamicalSystem()->topology();
  SP::InteractionsGraph indexSet2 = topo->indexSet(2);

  /**************************************************************************************************************
   *  Step 1-  solve a LCP at acceleration level for lambda^+_{k} for the last set indices
   *   if index2 is empty we should skip this step
   **************************************************************************************************************/

  DEBUG_PRINT("\nEVALUATE LEFT HAND SIDE\n");

  DEBUG_EXPR(std::cout<< "allOSNS->empty()   " << std::boolalpha << allOSNS->empty() << std::endl << std::endl);
  DEBUG_EXPR(std::cout<< "allOSNS->size()   "  << allOSNS->size() << std::endl << std::endl);

// -- LEFT SIDE --
  DynamicalSystemsGraph::VIterator dsi, dsend;
  for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
  {
    if (!checkOSI(dsi)) continue;
    SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

    Type::Siconos dsType = Type::value(*ds);
    SP::SiconosVector accFree;
    SP::SiconosVector work_tdg;
    SP::SiconosMatrix Mold;
    DEBUG_EXPR((*it)->display());

    if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
    {
      SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
      accFree = d->workspace(DynamicalSystem::free); /* POINTER CONSTRUCTOR : will contain
                                                       * the acceleration without contact force */
      accFree->zero();

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit
      Mold = d->mass();

      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());
      DEBUG_EXPR(Mold->display());

      if (! d->workspace(DynamicalSystem::free_tdg))
      {
        d->allocateWorkVector(DynamicalSystem::free_tdg, d->dimension()) ;
      }
      work_tdg = d->workspace(DynamicalSystem::free_tdg);
      work_tdg->zero();
      DEBUG_EXPR(work_tdg->display());

      if (d->forces())
      {
        d->computeForces(told, qold, vold);
        DEBUG_EXPR(d->forces()->display());

        *accFree += *(d->forces());
      }
      Mold->PLUForwardBackwardInPlace(*accFree); // contains left (right limit) acceleration without contact force
      d->addWorkVector(accFree,DynamicalSystem::free_tdg); // store the value in WorkFreeFree
    }
    else if(dsType == Type::NewtonEulerDS)
    {
      SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
      accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force
      accFree->zero();

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit
      //Mold = d->mass();
      assert(!d->mass()->isPLUInversed());
      Mold.reset(new SimpleMatrix(*(d->mass()))); // we copy the mass matrix to avoid its factorization
      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());
      DEBUG_EXPR(Mold->display());

      if (! d->workspace(DynamicalSystem::free_tdg))
      {
        d->allocateWorkVector(DynamicalSystem::free_tdg, d->dimension()) ;
      }

      work_tdg = d->workspace(DynamicalSystem::free_tdg);
      work_tdg->zero();
      DEBUG_EXPR(work_tdg->display());

      if (d->forces())
      {
        d->computeForces(told, qold, vold);
        DEBUG_EXPR(d->forces()->display());

        *accFree += *(d->forces());
      }
      Mold->PLUForwardBackwardInPlace(*accFree); // contains left (right limit) acceleration without contact force

      d->addWorkVector(accFree,DynamicalSystem::free_tdg); // store the value in WorkFreeFree

    }
    else
    {
      RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);
    }


    DEBUG_PRINT("accFree contains right limit acceleration at  t^+_k with contact force :\n");
    DEBUG_EXPR(accFree->display());
    DEBUG_PRINT("work_tdg contains right limit acceleration at t^+_k without contact force :\n");
    DEBUG_EXPR(work_tdg->display());

  }


  if (!allOSNS->empty())
  {
    if (indexSet2->size() >0)
    {
      InteractionsGraph::VIterator ui, uiend;
      SP::Interaction inter;
      for (std11::tie(ui, uiend) = indexSet2->vertices(); ui != uiend; ++ui)
      {
        inter = indexSet2->bundle(*ui);
        inter->relation()->computeJach(t, *inter, indexSet2->properties(*ui));
        inter->relation()->computeJacg(told, *inter, indexSet2->properties(*ui));
      }

      if (_simulation->nonSmoothDynamicalSystem()->topology()->hasChanged())
      {
        for (OSNSIterator itOsns = allOSNS->begin(); itOsns != allOSNS->end(); ++itOsns)
        {
          (*itOsns)->setHasBeenUpdated(false);
        }
      }
      assert((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]);

      if (((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->hasInteractions())) // it should be equivalent to indexSet2
      {
        DEBUG_PRINT("We compute lambda^+_{k} \n");
        (*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->compute(told);
        DEBUG_EXPR((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->display());
      }


      // Note Franck : at the time this results in a call to swapInMem of all Interactions of the NSDS
      // So let the simu do this.
      //(*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->saveInMemory(); // we push y and lambda in Memories
      _simulation->nonSmoothDynamicalSystem()->pushInteractionsInMemory();
      _simulation->nonSmoothDynamicalSystem()->updateInput(_simulation->nextTime(),2);

      for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
      {
        if (!checkOSI(dsi)) continue;
        SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

        Type::Siconos dsType = Type::value(*ds);
        if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
        {
          SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
          SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force

          SP::SiconosVector dummy(new SiconosVector(*(d->p(2)))); // value = contact force
          SP::SiconosMatrix Mold = d->mass();
          Mold->PLUForwardBackwardInPlace(*dummy);
          *accFree  += *(dummy);

          DEBUG_EXPR(d->p(2)->display());
        }
        else if (dsType == Type::NewtonEulerDS)
        {
          SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
          SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force

          SP::SiconosVector dummy(new SiconosVector(*(d->p(2)))); // value = contact force
          SP::SiconosMatrix Mold(new SimpleMatrix(*(d->mass())));  // we copy the mass matrix to avoid its factorization
          DEBUG_EXPR(Mold->display());
          Mold->PLUForwardBackwardInPlace(*dummy);
          *accFree  += *(dummy);

          DEBUG_EXPR(d->p(2)->display());

        }
        else
          RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);

      }
    }
  }

  /**************************************************************************************************************
   *  Step 2 -  compute v_{k,1}
   **************************************************************************************************************/


  DEBUG_PRINT("\n PREDICT RIGHT HAND SIDE\n");

  for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
  {
    if (!checkOSI(dsi)) continue;
    SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);


    // type of the current DS
    Type::Siconos dsType = Type::value(*ds);
    /* \warning the following conditional statement should be removed with a MechanicalDS class */
    if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
    {
      SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
      SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // contains acceleration without contact force

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0);

      // initialize *it->residuFree and predicted right velocity (left limit)
      SP::SiconosVector residuFree = ds->workspace(DynamicalSystem::freeresidu); // contains residu without nonsmooth effect
      SP::SiconosVector v = d->velocity(); //contains velocity v_{k+1}^- and not free velocity
      residuFree->zero();
      v->zero();

      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());


      *residuFree -= 0.5 * h**accFree;

      *v += h**accFree;
      *v += *vold;

      DEBUG_EXPR(residuFree->display());
      DEBUG_EXPR(v->display());

      SP::SiconosVector q = d->q(); // POINTER CONSTRUCTOR : contains position q_{k+1}
      *q = *qold;

      scal(0.5 * h, *vold + *v, *q, false);
      DEBUG_EXPR(q->display());
    }
    else if (dsType == Type::NewtonEulerDS)
    {
      SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
      SP::SiconosVector accFree = d->workspace(DynamicalSystem::free);

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0);

      // initialize *it->residuFree and predicted right velocity (left limit)
      SP::SiconosVector residuFree = ds->workspace(DynamicalSystem::freeresidu); // contains residu without nonsmooth effect
      SP::SiconosVector v = d->velocity(); //contains velocity v_{k+1}^- and not free velocity
      residuFree->zero();
      v->zero();

      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());


      *residuFree -= 0.5 * h**accFree;

      *v += h**accFree;
      *v += *vold;

      DEBUG_EXPR(residuFree->display());
      DEBUG_EXPR(v->display());

      //first step consists in computing  \dot q.
      //second step consists in updating q.
      //
      SP::SiconosMatrix T = d->T();
      SP::SiconosVector dotq = d->dotq();
      prod(*T, *v, *dotq, true);

      SP::SiconosVector dotqold = d->dotqMemory()->getSiconosVector(0);

      SP::SiconosVector q = d->q(); // POINTER CONSTRUCTOR : contains position q_{k+1}
      *q = *qold;

      scal(0.5 * h, *dotqold + *dotq, *q, false);
      DEBUG_PRINT("new q before normalizing\n");
      DEBUG_EXPR(q->display());
      //q[3:6] must be normalized
      d->normalizeq();
      d->computeT();
      DEBUG_PRINT("new q after normalizing\n");
      DEBUG_EXPR(q->display());



    }
    else
      RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);


    /** At this step, we obtain
     * \f[
     * \begin{cases}
     * v_{k,0} = \mbox{\tt vold} \\
     * q_{k,0} = qold \\
     * F_{k,+} = F(told,qold,vold) \\
     * Work_{freefree} =  M^{-1}_k (F^+_{k})  \mbox{stored in work_tdg} \\
     * Work_{free} =  M^{-1}_k (P^+_{2,k}+F^+_{k})  \mbox{stored in accFree} \\
     * R_{free} = -h/2 * M^{-1}_k (P^+_{2,k}+F^+_{k})  \mbox{stored in ResiduFree} \\
     * v_{k,1} = v_{k,0} + h * M^{-1}_k (P^+_{2,k}+F^+_{k})  \mbox{stored in v} \\
     * q_{k,1} = q_{k,0} + \frac{h}{2} (v_{k,0} + v_{k,1}) \mbox{stored in q} \\
     * \end{cases}
     * \f]
     **/
  }

  DEBUG_PRINT("\n DECIDE STRATEGY\n");
  /** Decide of the strategy impact or smooth multiplier.
   *  Compute _isThereImpactInTheTimeStep
   */
  _isThereImpactInTheTimeStep = false;
  if (!allOSNS->empty())
  {

    for (unsigned int level = _simulation->levelMinForOutput();
         level < _simulation->levelMaxForOutput(); level++)
    {
      _simulation->nonSmoothDynamicalSystem()->updateOutput(_simulation->nextTime(),level);
    }
    _simulation->updateIndexSets();

    SP::Topology topo =  _simulation->nonSmoothDynamicalSystem()->topology();
    SP::InteractionsGraph indexSet3 = topo->indexSet(3);

    if (indexSet3->size() > 0)
    {
      _isThereImpactInTheTimeStep = true;
      DEBUG_PRINT("There is an impact in the step. indexSet3->size() > 0. _isThereImpactInTheTimeStep = true;\n");
    }
    else
    {
      _isThereImpactInTheTimeStep = false;
      DEBUG_PRINT("There is no  impact in the step. indexSet3->size() = 0. _isThereImpactInTheTimeStep = false;\n");
    }
  }


  /* If _isThereImpactInTheTimeStep = true;
   * we recompute residuFree by removing the contribution of the nonimpulsive contact forces.
   * We add the contribution of the external forces at the end
   * of the time--step
   * If _isThereImpactInTheTimeStep = false;
   * we recompute residuFree by adding   the contribution of the external forces at the end
   * and the contribution of the nonimpulsive contact forces that are computed by solving the osnsp.
   */
  if (_isThereImpactInTheTimeStep)
  {

    DEBUG_PRINT("There is an impact in the step. indexSet3->size() > 0.  _isThereImpactInTheTimeStep = true\n");
    for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
    {
      if (!checkOSI(dsi)) continue;
      SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

      // type of the current DS
      Type::Siconos dsType = Type::value(*ds);
      /* \warning the following conditional statement should be removed with a MechanicalDS class */
      if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
      {
        SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
        SP::SiconosVector residuFree = d->workspace(DynamicalSystem::freeresidu);
        SP::SiconosVector v = d->velocity();
        SP::SiconosVector q = d->q();
        SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
        SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit

        SP::SiconosMatrix M = d->mass(); // POINTER CONSTRUCTOR : contains mass matrix

        //residuFree->zero();
        //v->zero();
        SP::SiconosVector work_tdg = d->workspace(DynamicalSystem::free_tdg);
        assert(work_tdg);
        *residuFree =  - 0.5 * h**work_tdg;


        d->computeMass();
        DEBUG_EXPR(M->display());
        if (d->forces())
        {
          d->computeForces(t, q, v);
          *work_tdg = *(d->forces());
          DEBUG_EXPR(d->forces()->display());
        }

        M->PLUForwardBackwardInPlace(*work_tdg); // contains right (left limit) acceleration without contact force
        *residuFree -= 0.5 * h**work_tdg;
        DEBUG_EXPR(residuFree->display());
      }
      else if (dsType == Type::NewtonEulerDS)
      {
        SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
        SP::SiconosVector residuFree = d->workspace(DynamicalSystem::freeresidu);
        SP::SiconosVector v = d->velocity();
        SP::SiconosVector q = d->q();
        SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
        SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit

        SP::SiconosMatrix M(new SimpleMatrix(*(d->mass()))); // we copy the mass matrix to avoid its factorization;
        DEBUG_EXPR(M->display());

        //residuFree->zero();
        v->zero();
        SP::SiconosVector work_tdg = d->workspace(DynamicalSystem::free_tdg);
        assert(work_tdg);
        *residuFree = 0.5 * h**work_tdg;
        work_tdg->zero();

        if (d->forces())
        {
          d->computeForces(t, q, v);
          *work_tdg += *(d->forces());
        }

        M->PLUForwardBackwardInPlace(*work_tdg); // contains right (left limit) acceleration without contact force
        *residuFree -= 0.5 * h**work_tdg;
        DEBUG_EXPR(residuFree->display());
      }
      else
        RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);
    }
  }
  else
  {
    DEBUG_PRINT("There is no  impact in the step. indexSet3->size() = 0. _isThereImpactInTheTimeStep = false;\n");
    // -- RIGHT SIDE --
    // calculate acceleration without contact force

    for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
    {
      if (!checkOSI(dsi)) continue;
      SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

    
      // type of the current DS
      Type::Siconos dsType = Type::value(*ds);
      /* \warning the following conditional statement should be removed with a MechanicalDS class */
      if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
      {

        SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
        SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force
        accFree->zero();
        // get right state from memory
        SP::SiconosVector q = d->q(); // contains position q_{k+1}
        SP::SiconosVector v = d->velocity(); // contains velocity v_{k+1}^- and not free velocity
        SP::SiconosMatrix M = d->mass(); // POINTER CONSTRUCTOR : contains mass matrix

        DEBUG_EXPR(accFree->display());
        DEBUG_EXPR(q->display());
        DEBUG_EXPR(v->display());
        // Lagrangian Nonlinear Systems
        if (dsType == Type::LagrangianDS || dsType == Type::LagrangianLinearTIDS)
        {
          d->computeMass();

          DEBUG_EXPR(M->display());
          if (d->forces())
          {
            d->computeForces(t, q, v);
            *accFree += *(d->forces());
          }
        }
        else
          RuntimeException::selfThrow
          ("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);

        M->PLUForwardBackwardInPlace(*accFree); // contains right (left limit) acceleration without contact force
        DEBUG_PRINT("accFree contains left limit acceleration at  t^-_{k+1} without contact force :\n");
        DEBUG_EXPR(accFree->display());
       }
      else if (dsType == Type::NewtonEulerDS)
      {
        SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
        SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force
        accFree->zero();
        // get right state from memory
        SP::SiconosVector q = d->q(); // contains position q_{k+1}
        SP::SiconosVector v = d->velocity(); // contains velocity v_{k+1}^- and not free velocity
        SP::SiconosMatrix M(new SimpleMatrix(*(d->mass()))); // we copy the mass matrix to avoid its factorization;

        DEBUG_EXPR(accFree->display());
        DEBUG_EXPR(q->display());
        DEBUG_EXPR(v->display());

        if (d->forces())
        {
          d->computeForces(t, q, v);
          *accFree += *(d->forces());
        }

        M->PLUForwardBackwardInPlace(*accFree); // contains right (left limit) acceleration without contact force
        DEBUG_PRINT("accFree contains left limit acceleration at  t^-_{k+1} without contact force :\n");
        DEBUG_EXPR(accFree->display());
      }
      else
        RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);

    }

    // solve a LCP at acceleration level only for contacts which have been active at the beginning of the time-step
    if (!allOSNS->empty())
    {
      // for (unsigned int level = _simulation->levelMinForOutput(); level < _simulation->levelMaxForOutput(); level++)
      // {
      //   _simulation->updateOutput(level);
      // }
      // _simulation->updateIndexSets();
      DEBUG_PRINT("We compute lambda^-_{k+1} \n");
      InteractionsGraph::VIterator ui, uiend;
      SP::Interaction inter;
      for (std11::tie(ui, uiend) = indexSet2->vertices(); ui != uiend; ++ui)
      {
        inter = indexSet2->bundle(*ui);
        inter->relation()->computeJach(t, *inter, indexSet2->properties(*ui));
        inter->relation()->computeJacg(t, *inter, indexSet2->properties(*ui));
      }
      if (_simulation->nonSmoothDynamicalSystem()->topology()->hasChanged())
      {
        for (OSNSIterator itOsns = allOSNS->begin(); itOsns != allOSNS->end(); ++itOsns)
        {
          (*itOsns)->setHasBeenUpdated(false);
        }
      }

      if (((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->hasInteractions()))
      {
        (*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->compute(t);
        DEBUG_EXPR((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->display(););
        _simulation->nonSmoothDynamicalSystem()->updateInput(_simulation->nextTime(),2);
      }
Ejemplo n.º 4
0
void MLCPProjectOnConstraints::computeInteractionBlock(const InteractionsGraph::EDescriptor& ed)
{

  // Computes matrix _interactionBlocks[inter1][inter2] (and allocates memory if
  // necessary) if inter1 and inter2 have commond DynamicalSystem.  How
  // _interactionBlocks are computed depends explicitely on the type of
  // Relation of each Interaction.

  // Warning: we suppose that at this point, all non linear
  // operators (G for lagrangian relation for example) have been
  // computed through plug-in mechanism.

#ifdef MLCPPROJ_DEBUG
  std::cout << "MLCPProjectOnConstraints::computeInteractionBlock currentInteractionBlock start " << std::endl;
#endif
  // Get dimension of the NonSmoothLaw (ie dim of the interactionBlock)
  SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());

  SP::DynamicalSystem ds = indexSet->bundle(ed);
  SP::Interaction inter1 = indexSet->bundle(indexSet->source(ed));
  SP::Interaction inter2 = indexSet->bundle(indexSet->target(ed));
  // For the edge 'ds', we need to find relative position of this ds
  // in inter1 and inter2 relation matrices (--> pos1 and pos2 below)
  // - find if ds is source or target in inter_i
  InteractionsGraph::VDescriptor vertex_inter;
  // - get the corresponding position
  unsigned int pos1, pos2;
  // source of inter1 :
  vertex_inter = indexSet->source(ed);
  VectorOfSMatrices& workMInter1 = *indexSet->properties(vertex_inter).workMatrices;
  SP::OneStepIntegrator Osi = indexSet->properties(vertex_inter).osi;
  SP::DynamicalSystem tmpds = indexSet->properties(vertex_inter).source;
  if (tmpds == ds)
    pos1 =  indexSet->properties(vertex_inter).source_pos;
  else
  {
    tmpds  = indexSet->properties(vertex_inter).target;
    pos1 =  indexSet->properties(vertex_inter).target_pos;
  }
  // now, inter2
  vertex_inter = indexSet->target(ed);
  VectorOfSMatrices& workMInter2 = *indexSet->properties(vertex_inter).workMatrices;
  tmpds = indexSet->properties(vertex_inter).source;
  if (tmpds == ds)
    pos2 =  indexSet->properties(vertex_inter).source_pos;
  else
  {
    tmpds  = indexSet->properties(vertex_inter).target;
    pos2 =  indexSet->properties(vertex_inter).target_pos;
  }
    
  unsigned int index1 = indexSet->index(indexSet->source(ed));
  unsigned int index2 = indexSet->index(indexSet->target(ed));
    
  unsigned int sizeY1 = 0;
  sizeY1 = std11::static_pointer_cast<OSNSMatrixProjectOnConstraints>
    (_M)->computeSizeForProjection(inter1);
  unsigned int sizeY2 = 0;
  sizeY2 = std11::static_pointer_cast<OSNSMatrixProjectOnConstraints>
    (_M)->computeSizeForProjection(inter2);
    
  SP::SiconosMatrix currentInteractionBlock;
    
  assert(index1 != index2);

  if (index2 > index1) // upper block
  {
    //     if (! indexSet->properties(ed).upper_block)
    //     {
    //       indexSet->properties(ed).upper_block.reset(new SimpleMatrix(sizeY1, sizeY2));
    //     }

    currentInteractionBlock = indexSet->upper_blockProj[ed];
#ifdef MLCPPROJ_DEBUG
    std::cout << "MLCPProjectOnConstraints::computeInteractionBlock currentInteractionBlock " << std::endl;
    //    currentInteractionBlock->display();
    std::cout << "sizeY1 " << sizeY1  << std::endl;
    std::cout << "sizeY2 " << sizeY2  << std::endl;
    std::cout <<  "upper_blockProj " <<  indexSet->upper_blockProj[ed].get() << " of edge " << ed << " of size " << currentInteractionBlock->size(0) << " x " << currentInteractionBlock->size(0) << " for interaction " << inter1->number() << " and interaction " <<  inter2->number() <<  std::endl;
    // std::cout<<"inter1->display() "<< inter1->number()<< std::endl;
    //inter1->display();
    // std::cout<<"inter2->display() "<< inter2->number()<< std::endl;
    //inter2->display();

#endif
    assert(currentInteractionBlock->size(0) == sizeY1);
    assert(currentInteractionBlock->size(1) == sizeY2);

  }
  else  // lower block
  {
    //     if (! indexSet->properties(ed).lower_block)
    //     {
    //       indexSet->properties(ed).lower_block.reset(new SimpleMatrix(sizeY1, sizeY2));
    //     }

    assert(indexSet->lower_blockProj[ed]->size(0) == sizeY1);
    assert(indexSet->lower_blockProj[ed]->size(1) == sizeY2);

    currentInteractionBlock = indexSet->lower_blockProj[ed];
  }


  SP::SiconosMatrix leftInteractionBlock, rightInteractionBlock;

  RELATION::TYPES relationType1, relationType2;

  // General form of the interactionBlock is : interactionBlock =
  // a*extraInteractionBlock + b * leftInteractionBlock * centralInteractionBlocks
  // * rightInteractionBlock a and b are scalars, centralInteractionBlocks a
  // matrix depending on the integrator (and on the DS), the
  // simulation type ...  left, right and extra depend on the relation
  // type and the non smooth law.
  relationType1 = inter1->relation()->getType();
  relationType2 = inter2->relation()->getType();
  if (relationType1 == NewtonEuler &&
      relationType2 == NewtonEuler)
  {
    assert(inter1 != inter2);
    currentInteractionBlock->zero();
#ifdef MLCPPROJ_WITH_CT
    unsigned int sizeDS = (std11::static_pointer_cast<NewtonEulerDS>(ds))->getDim();
    leftInteractionBlock.reset(new SimpleMatrix(sizeY1, sizeDS));
    inter1->getLeftInteractionBlockForDS(pos1, leftInteractionBlock);
    SP::NewtonEulerDS neds = (std11::static_pointer_cast<NewtonEulerDS>(ds));
    SP::SimpleMatrix T = neds->T();
    SP::SimpleMatrix workT(new SimpleMatrix(*T));
    workT->trans();
    SP::SimpleMatrix workT2(new SimpleMatrix(6, 6));
    prod(*workT, *T, *workT2, true);
    rightInteractionBlock.reset(new SimpleMatrix(sizeY2, sizeDS));
    inter2->getLeftInteractionBlockForDS(pos2, rightInteractionBlock);
    rightInteractionBlock->trans();
    workT2->PLUForwardBackwardInPlace(*rightInteractionBlock);
    prod(*leftInteractionBlock, *rightInteractionBlock, *currentInteractionBlock, false);

#else

    unsigned int sizeDS = (std11::static_pointer_cast<NewtonEulerDS>(ds))->getqDim();
    leftInteractionBlock.reset(new SimpleMatrix(sizeY1, sizeDS));
    inter1->getLeftInteractionBlockForDSProjectOnConstraints(pos1, leftInteractionBlock);
    SP::NewtonEulerDS neds = (std11::static_pointer_cast<NewtonEulerDS>(ds));
    rightInteractionBlock.reset(new SimpleMatrix(sizeY2, sizeDS));
    inter2->getLeftInteractionBlockForDSProjectOnConstraints(pos2, rightInteractionBlock);
    rightInteractionBlock->trans();
    prod(*leftInteractionBlock, *rightInteractionBlock, *currentInteractionBlock, false);
  }
#endif
  else if (relationType1 == Lagrangian &&
           relationType2 == Lagrangian)
  {
    unsigned int sizeDS =  ds->getDim();
    leftInteractionBlock.reset(new SimpleMatrix(sizeY1, sizeDS));
    inter1->getLeftInteractionBlockForDS(pos1, leftInteractionBlock, workMInter1);

    Type::Siconos dsType = Type::value(*ds);
    if (dsType == Type::LagrangianLinearTIDS || dsType == Type::LagrangianDS)
    {
      SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);

      if (d->boundaryConditions()) // V.A. Should we do that ?
      {
        for (std::vector<unsigned int>::iterator itindex =
               d->boundaryConditions()->velocityIndices()->begin() ;
             itindex != d->boundaryConditions()->velocityIndices()->end();
             ++itindex)
        {
          // (sizeY1,sizeDS));
          SP::SiconosVector coltmp(new SiconosVector(sizeY1));
          coltmp->zero();
          leftInteractionBlock->setCol(*itindex, *coltmp);
        }
      }
    }
#ifdef MLCPPROJ_DEBUG
    std::cout << "MLCPProjectOnConstraints::computeInteractionBlock : leftInteractionBlock" << std::endl;
    leftInteractionBlock->display();
#endif
    // inter1 != inter2
    rightInteractionBlock.reset(new SimpleMatrix(sizeY2, sizeDS));
    inter2->getLeftInteractionBlockForDS(pos2, rightInteractionBlock, workMInter2);
#ifdef MLCPPROJ_DEBUG
    std::cout << "MLCPProjectOnConstraints::computeInteractionBlock : rightInteractionBlock" << std::endl;
    rightInteractionBlock->display();
#endif
    // Warning: we use getLeft for Right interactionBlock
    // because right = transpose(left) and because of
    // size checking inside the getBlock function, a
    // getRight call will fail.
    SP::SiconosMatrix centralInteractionBlock = getOSIMatrix(Osi, ds);
#ifdef MLCPPROJ_DEBUG
    std::cout << "MLCPProjectOnConstraints::computeInteractionBlock : centralInteractionBlocks " << std::endl;
    centralInteractionBlock->display();
#endif
    rightInteractionBlock->trans();

    if (_useMassNormalization)
    {
      centralInteractionBlock->PLUForwardBackwardInPlace(*rightInteractionBlock);
      //*currentInteractionBlock +=  *leftInteractionBlock ** work;
      prod(*leftInteractionBlock, *rightInteractionBlock, *currentInteractionBlock, false);
    }
    else
    {
      prod(*leftInteractionBlock, *rightInteractionBlock, *currentInteractionBlock, false);
    }
#ifdef MLCPPROJ_DEBUG
    std::cout << "MLCPProjectOnConstraints::computeInteractionBlock : currentInteractionBlock" << std::endl;
    currentInteractionBlock->display();
#endif
  }

  else
    RuntimeException::selfThrow("MLCPProjectOnConstraints::computeInteractionBlock not yet implemented for relation of type " + relationType1);

}
Ejemplo n.º 5
0
void MLCPProjectOnConstraints::computeDiagonalInteractionBlock(const InteractionsGraph::VDescriptor& vd)
{
  SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());

  SP::DynamicalSystem DS1 = indexSet->properties(vd).source;
  SP::DynamicalSystem DS2 = indexSet->properties(vd).target;
  SP::Interaction inter = indexSet->bundle(vd);
  SP::OneStepIntegrator Osi = indexSet->properties(vd).osi;
  unsigned int pos1, pos2;
  pos1 = indexSet->properties(vd).source_pos;
  pos2 = indexSet->properties(vd).target_pos;

  unsigned int sizeY = 0;
  sizeY = std11::static_pointer_cast<OSNSMatrixProjectOnConstraints>
    (_M)->computeSizeForProjection(inter);


#ifdef MLCPPROJ_DEBUG
  std::cout << "\nMLCPProjectOnConstraints::computeDiagonalInteractionBlock" <<std::endl;
  std::cout << "indexSetLevel()" << indexSetLevel() << std::endl;
  //   std::cout << "indexSet :"<< indexSet << std::endl;
  //   std::cout << "vd :"<< vd << std::endl;
  //  indexSet->display();
  //  std::cout << "DS1 :" << std::endl;
  // DS1->display();
  //  std::cout << "DS2 :" << std::endl;
  // DS2->display();
#endif
  assert(indexSet->blockProj[vd]);
  SP::SiconosMatrix currentInteractionBlock = indexSet->blockProj[vd];

#ifdef MLCPPROJ_DEBUG
  //     std::cout<<"MLCPProjectOnConstraints::computeDiagonalInteractionBlock  "<<std::endl;
  //    currentInteractionBlock->display();
  std::cout << "sizeY " << sizeY  << std::endl;
  std::cout <<  "blockProj " <<  indexSet->blockProj[vd].get() << " of edge " << vd << " of size " << currentInteractionBlock->size(0) << " x " << currentInteractionBlock->size(0) << " for interaction " << inter->number() <<  std::endl;
  // std::cout<<"inter1->display() "<< inter1->number()<< std::endl;
  //inter1->display();
  // std::cout<<"inter2->display() "<< inter2->number()<< std::endl;
  //inter2->display();

#endif

  assert(currentInteractionBlock->size(0) == sizeY);
  assert(currentInteractionBlock->size(1) == sizeY);

  if (!_hasBeenUpdated)
    computeOptions(inter, inter);
  // Computes matrix _interactionBlocks[inter1][inter2] (and allocates memory if
  // necessary) if inter1 and inter2 have commond DynamicalSystem.  How
  // _interactionBlocks are computed depends explicitely on the type of
  // Relation of each Interaction.

  // Warning: we suppose that at this point, all non linear
  // operators (G for lagrangian relation for example) have been
  // computed through plug-in mechanism.

  // Get the W and Theta maps of one of the Interaction -
  // Warning: in the current version, if OSI!=MoreauJeanOSI, this fails.
  // If OSI = MOREAU, centralInteractionBlocks = W if OSI = LSODAR,
  // centralInteractionBlocks = M (mass matrices)
  SP::SiconosMatrix leftInteractionBlock, rightInteractionBlock, leftInteractionBlock1;


  // General form of the interactionBlock is : interactionBlock =
  // a*extraInteractionBlock + b * leftInteractionBlock * centralInteractionBlocks
  // * rightInteractionBlock a and b are scalars, centralInteractionBlocks a
  // matrix depending on the integrator (and on the DS), the
  // simulation type ...  left, right and extra depend on the relation
  // type and the non smooth law.


  VectorOfSMatrices& workMInter = *indexSet->properties(vd).workMatrices;

  currentInteractionBlock->zero();

  // loop over the common DS
  bool endl = false;
  unsigned int pos = pos1;
  for (SP::DynamicalSystem ds = DS1; !endl; ds = DS2)
  {
    assert(ds == DS1 || ds == DS2);
    endl = (ds == DS2);

    if (Type::value(*ds) == Type::LagrangianLinearTIDS ||
        Type::value(*ds) == Type::LagrangianDS)
    {
      if (inter->relation()->getType() != Lagrangian)
      {
        RuntimeException::selfThrow(
          "MLCPProjectOnConstraints::computeDiagonalInteractionBlock - relation is not of type Lagrangian with a LagrangianDS.");
      }


      SP::LagrangianDS lds = (std11::static_pointer_cast<LagrangianDS>(ds));
      unsigned int sizeDS = lds->getDim();
      leftInteractionBlock.reset(new SimpleMatrix(sizeY, sizeDS));
      inter->getLeftInteractionBlockForDS(pos, leftInteractionBlock, workMInter);

      if (lds->boundaryConditions()) // V.A. Should we do that ?
      {
        for (std::vector<unsigned int>::iterator itindex =
               lds->boundaryConditions()->velocityIndices()->begin() ;
             itindex != lds->boundaryConditions()->velocityIndices()->end();
             ++itindex)
        {
          // (sizeY,sizeDS));
          SP::SiconosVector coltmp(new SiconosVector(sizeY));
          coltmp->zero();
          leftInteractionBlock->setCol(*itindex, *coltmp);
        }
      }
      // (inter1 == inter2)
      SP::SiconosMatrix work(new SimpleMatrix(*leftInteractionBlock));
      //
      //        std::cout<<"LinearOSNS : leftUBlock\n";
      //        work->display();
      work->trans();
      //        std::cout<<"LinearOSNS::computeInteractionBlock leftInteractionBlock"<<endl;
      //        leftInteractionBlock->display();



      if (_useMassNormalization)
      {
        SP::SiconosMatrix centralInteractionBlock = getOSIMatrix(Osi, ds);
        centralInteractionBlock->PLUForwardBackwardInPlace(*work);
        prod(*leftInteractionBlock, *work, *currentInteractionBlock, false);
        //      gemm(CblasNoTrans,CblasNoTrans,1.0,*leftInteractionBlock,*work,1.0,*currentInteractionBlock);
      }
      else
      {
        prod(*leftInteractionBlock, *work, *currentInteractionBlock, false);
      }


      //*currentInteractionBlock *=h;
    }
    else if (Type::value(*ds) == Type::NewtonEulerDS)
    {

      if (inter->relation()->getType() != NewtonEuler)
      {
        RuntimeException::selfThrow("MLCPProjectOnConstraints::computeDiagonalInteractionBlock - relation is not from NewtonEulerR.");
      }
      SP::NewtonEulerDS neds = (std11::static_pointer_cast<NewtonEulerDS>(ds));
#ifdef MLCPPROJ_WITH_CT
      unsigned int sizeDS = neds->getDim();
      SP::SimpleMatrix T = neds->T();
      SP::SimpleMatrix workT(new SimpleMatrix(*T));
      workT->trans();
      SP::SimpleMatrix workT2(new SimpleMatrix(6, 6));
      prod(*workT, *T, *workT2, true);
      leftInteractionBlock.reset(new SimpleMatrix(sizeY, sizeDS));
      inter->getLeftInteractionBlockForDS(pos, leftInteractionBlock);
      SP::SiconosMatrix work(new SimpleMatrix(*leftInteractionBlock));
      std::cout << "LinearOSNS : leftUBlock\n";
      work->display();
      work->trans();
      std::cout << "LinearOSNS::computeInteractionBlock workT2" <<std::endl;
      workT2->display();
      workT2->PLUForwardBackwardInPlace(*work);
      prod(*leftInteractionBlock, *work, *currentInteractionBlock, false);
#else
      if (0) //(std11::static_pointer_cast<NewtonEulerR> inter->relation())->_isConstact){
      {
//        unsigned int sizeDS = neds->getDim();
//        SP::SimpleMatrix T = neds->T();
//        SP::SimpleMatrix workT(new SimpleMatrix(*T));
//        workT->trans();
//        SP::SimpleMatrix workT2(new SimpleMatrix(6, 6));
//        prod(*workT, *T, *workT2, true);
//        leftInteractionBlock1.reset(new SimpleMatrix(sizeY, sizeDS));
//        inter->getLeftInteractionBlockForDS(pos, leftInteractionBlock);
//        leftInteractionBlock.reset(new SimpleMatrix(1, sizeDS));
//        for (unsigned int ii = 0; ii < sizeDS; ii++)
//          leftInteractionBlock->setValue(1, ii, leftInteractionBlock1->getValue(1, ii));
//
//        SP::SiconosMatrix work(new SimpleMatrix(*leftInteractionBlock));
//        //cout<<"LinearOSNS : leftUBlock\n";
//        //work->display();
//        work->trans();
//        //cout<<"LinearOSNS::computeInteractionBlock workT2"<<endl;
//        //workT2->display();
//        workT2->PLUForwardBackwardInPlace(*work);
//        prod(*leftInteractionBlock, *work, *currentInteractionBlock, false);
      }
      else
      {
        unsigned int sizeDS = (std11::static_pointer_cast<NewtonEulerDS>(ds))->getqDim();
        leftInteractionBlock.reset(new SimpleMatrix(sizeY, sizeDS));
        inter->getLeftInteractionBlockForDSProjectOnConstraints(pos, leftInteractionBlock);
        // #ifdef MLCPPROJ_DEBUG
        //          std::cout << "MLCPProjectOnConstraints::computeDiagonalInteractionBlock - NewtonEuler case leftInteractionBlock : " << std::endl;
        //         leftInteractionBlock->display();
        // #endif

        SP::SiconosMatrix work(new SimpleMatrix(*leftInteractionBlock));
        //cout<<"LinearOSNS sizeY="<<sizeY<<": leftUBlock\n";
        //work->display();
        work->trans();
        prod(*leftInteractionBlock, *work, *currentInteractionBlock, false);
        // #ifdef MLCPPROJ_DEBUG
        //          std::cout << "MLCPProjectOnConstraints::computeDiagonalInteractionBlock - NewtonEuler case currentInteractionBlock : "<< std::endl;
        //         currentInteractionBlock->display();
        // #endif


      }
      
    }
    else
      RuntimeException::selfThrow("MLCPProjectOnConstraints::computeDiagonalInteractionBlock - ds is not from NewtonEulerDS neither a LagrangianDS.");



#endif
#ifdef MLCPPROJ_DEBUG
    std::cout << "MLCPProjectOnConstraints::computeDiagonalInteractionBlock DiaginteractionBlock " << std::endl;
    currentInteractionBlock->display();
#endif
    // Set pos for next loop. 
    pos = pos2;
     
  }
  
}