Ejemplo n.º 1
0
void EventDriven::updateIndexSetsWithDoubleCondition()
{

  assert(_nsds);
  assert(_nsds->topology());

  // for all Interactions in indexSet[i-1], compute y[i-1] and
  // update the indexSet[i]

  SP::Topology topo = _nsds->topology();

  SP::InteractionsGraph indexSet2 = topo->indexSet(2);

  InteractionsGraph::VIterator ui, uiend, vnext;
  std11::tie(ui, uiend) = indexSet2->vertices();

  for (vnext = ui; ui != uiend; ui = vnext)
  {
    ++vnext;

    SP::Interaction inter = indexSet2->bundle(*ui);
    double gamma = inter->getYRef(2);
    double F     = inter->getLambdaRef(2);
    if (fabs(F) < _TOL_ED)
      indexSet2->remove_vertex(inter);
    else if ((gamma < -_TOL_ED) || (F < -_TOL_ED))
      RuntimeException::selfThrow("EventDriven::updateIndexSetsWithDoubleCondition(), output[2] and lambda[2] for Interactionof indexSet[2] must be higher or equal to zero.");
    else if (((fabs(gamma) > _TOL_ED) && (fabs(F) > _TOL_ED)))
      RuntimeException::selfThrow("EventDriven::updateIndexSetsWithDoubleCondition(), something is wrong for the LCP resolution.");
  }
}
Ejemplo n.º 2
0
void TimeStepping::initOSNS()
{
  // === creates links between work vector in OSI and work vector in
  // Interactions
  SP::OneStepIntegrator  osi;

  SP::Topology topo =  _nsds->topology();
  SP::InteractionsGraph indexSet0 = topo->indexSet(0);

  InteractionsGraph::VIterator ui, uiend;

  if (!_allNSProblems->empty()) // ie if some Interactions have been
    // declared and a Non smooth problem
    // built.
  {
    //if (_allNSProblems->size()>1)
    //  RuntimeException::selfThrow("TimeStepping::initialize, at the time, a time stepping simulation can not have more than one non smooth problem.");

    // At the time, we consider that for all systems, levelMin is
    // equal to the minimum value of the relative degree - 1 except
    // for degree 0 case where we keep 0.


    // === update all index sets ===
    updateIndexSets();

    // initialization of  OneStepNonSmoothProblem
    for (OSNSIterator itOsns = _allNSProblems->begin(); itOsns != _allNSProblems->end(); ++itOsns)
    {
      if (*itOsns)
        (*itOsns)->initialize(shared_from_this());
      else
        RuntimeException::selfThrow("TimeStepping::initOSNS failed. A OneStepNSProblem has not been set. ");
    }
  }
}
Ejemplo n.º 3
0
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
double EventDriven::detectEvents(bool updateIstate)
{
  double _minResiduOutput = 0.0; // maximum of g_i with i running over all activated or deactivated contacts
  // Loop over all interactions to detect whether some constraints are activated or deactivated
  bool _IsContactClosed = false;
  bool _IsContactOpened = false;
  bool _IsFirstTime = true;
  InteractionsGraph::VIterator ui, uiend;
  SP::SiconosVector y, ydot, lambda;
  SP::Topology topo = _nsds->topology();
  SP::InteractionsGraph indexSet2 = topo->indexSet(2);
  //
#ifdef DEBUG_MESSAGES
  cout << "======== In EventDriven::detectEvents =========" <<endl;
#endif
  for (std11::tie(ui, uiend) = _indexSet0->vertices(); ui != uiend; ++ui)
  {
    SP::Interaction inter = _indexSet0->bundle(*ui);
    double nsLawSize = inter->nonSmoothLaw()->size();
    if (nsLawSize != 1)
    {
      RuntimeException::selfThrow("In EventDriven::detectEvents, the interaction size > 1 has not been implemented yet!!!");
    }
    y = inter->y(0);   // output y at this Interaction
    ydot = inter->y(1); // output of level 1 at this Interaction
    lambda = inter->lambda(2); // input of level 2 at this Interaction
    if (!(indexSet2->is_vertex(inter))) // if Interaction is not in the indexSet[2]
    {
      if ((*y)(0) < _TOL_ED) // gap at the current interaction <= 0
      {
        _IsContactClosed = true;
      }

      if (_IsFirstTime)
      {
        _minResiduOutput = (*y)(0);
        _IsFirstTime = false;
      }
      else
      {
        if (_minResiduOutput > (*y)(0))
        {
          _minResiduOutput = (*y)(0);
        }
      }
    }
    else // If interaction is in the indexSet[2]
    {
      if ((*lambda)(0) < _TOL_ED) // normal force at the current interaction <= 0
      {
        _IsContactOpened = true;
      }

      if (_IsFirstTime)
      {
        _minResiduOutput = (*lambda)(0);
        _IsFirstTime = false;
      }
      else
      {
        if (_minResiduOutput > (*lambda)(0))
        {
          _minResiduOutput = (*lambda)(0);
        }
      }
    }
    //
#ifdef DEBUG_MESSAGES
    cout.precision(15);
    cout << "Contact number: " << inter->number() <<endl;
    cout << "Contact gap: " << (*y)(0) <<endl;
    cout << "Contact force: " << (*lambda)(0) <<endl;
    cout << "Is contact is closed: " << _IsContactClosed <<endl;
    cout << "Is contact is opened: " << _IsContactOpened <<endl;
#endif
    //
  }
  //
  if (updateIstate)
  {
    if ((!_IsContactClosed) && (!_IsContactOpened))
    {
      _istate = 2; //no event is detected
    }
    else if ((_IsContactClosed) && (!_IsContactOpened))
    {
      _istate = 3; // Only some contacts are closed
    }
    else if ((!_IsContactClosed) && (_IsContactOpened))
    {
      _istate = 4; // Only some contacts are opened
    }
    else
    {
      _istate = 5; // Some contacts are closed AND some contacts are opened
    }
  }
  //
  return  _minResiduOutput;
}
Ejemplo n.º 4
0
void EventDriven::updateIndexSet(unsigned int i)
{
  assert(_nsds);
  assert(_nsds->topology());
  SP::Topology topo = _nsds->topology();

  assert(i < topo->indexSetsSize() &&
         "EventDriven::updateIndexSet(i), indexSets[i] does not exist.");
  // IndexSets[0] must not be updated in simulation, since it belongs to Topology.
  assert(i > 0  &&
         "EventDriven::updateIndexSet(i=0), indexSets[0] cannot be updated.");

  // For all Interactions in indexSet[i-1], compute y[i-1] and
  // update the indexSet[i].
  SP::InteractionsGraph indexSet1 = topo->indexSet(1);
  SP::InteractionsGraph indexSet2 = topo->indexSet(2);
  assert(_indexSet0);
  assert(indexSet1);
  assert(indexSet2);

  // DEBUG_PRINTF("update indexSets start : indexSet0 size : %ld\n", indexSet0->size());
  // DEBUG_PRINTF("update IndexSets start : indexSet1 size : %ld\n", indexSet1->size());
  // DEBUG_PRINTF("update IndexSets start : indexSet2 size : %ld\n", indexSet2->size());

  InteractionsGraph::VIterator uibegin, uipend, uip;
  std11::tie(uibegin, uipend) = _indexSet0->vertices();
  // loop over all vertices of the indexSet[i-1]
  for (uip = uibegin; uip != uipend; ++uip)
  {
    SP::Interaction inter = _indexSet0->bundle(*uip);
    if (i == 1) // IndexSet[1]
    {
      // if indexSet[1]=>getYRef(0): output y
      // if indexSet[2]=>getYRef(1): output ydot
      double y = inter->getYRef(0); // output to define the IndexSets at this Interaction
      if (y < -_TOL_ED) // y[0] < 0
      {
        inter->display();
        cout << "y = " << y << " < -_TOL_ED =  "   << -_TOL_ED  <<endl;
        RuntimeException::selfThrow("EventDriven::updateIndexSet, output of level 0 must be positive!!! ");
      }
      // 1 - If the Interaction is not yet in the set
      if (!indexSet1->is_vertex(inter)) // Interaction is not yet in the indexSet[i]
      {
        if (fabs(y) <= _TOL_ED)
        {
          // vertex and edges insertions
          indexSet1->copy_vertex(inter, *_indexSet0);
        }
      }
      else // if the Interaction was already in the set
      {
        if (fabs(y) > _TOL_ED)
        {
          indexSet1->remove_vertex(inter); // remove the Interaction from IndexSet[1]
          inter->lambda(1)->zero(); // reset the lambda[1] to zero
        }
      }
    }
    else if (i == 2) // IndexSet[2]
    {
      if (indexSet1->is_vertex(inter)) // Interaction is in the indexSet[1]
      {
        double y = inter->getYRef(1); // output of level 1 at this Interaction
        if (!indexSet2->is_vertex(inter)) // Interaction is not yet in the indexSet[2]
        {
          if (fabs(y) <= _TOL_ED)
          {
            // vertex and edges insertions
            indexSet2->copy_vertex(inter, *_indexSet0);
          }
        }
        else // if the Interaction was already in the set
        {
          if (fabs(y) > _TOL_ED)
          {
            indexSet2->remove_vertex(inter); // remove the Interaction from IndexSet[1]
            inter->lambda(2)->zero(); // reset the lambda[i] to zero
          }
        }
      }
      else // Interaction is not in the indexSet[1]
      {
        if (indexSet2->is_vertex(inter)) // Interaction is in the indexSet[2]
        {
          indexSet2->remove_vertex(inter); // remove the Interaction from IndexSet[2]
          inter->lambda(2)->zero(); // reset the lambda[i] to zero
        }
      }
    }
    else
    {
      RuntimeException::selfThrow("EventDriven::updateIndexSet, IndexSet[i > 2] doesn't exist");
    }
  }

  // DEBUG_PRINTF("update indexSets end : indexSet0 size : %ld\n", indexSet0->size());
  // DEBUG_PRINTF("update IndexSets end : indexSet1 size : %ld\n", indexSet1->size());
  // DEBUG_PRINTF("update IndexSets end : indexSet2 size : %ld\n", indexSet2->size());
}
Ejemplo n.º 5
0
void EventDriven::computeg(SP::OneStepIntegrator osi,
                           integer * sizeOfX, doublereal* time,
                           doublereal* x, integer * ng,
                           doublereal * gOut)
{
  assert(_nsds);
  assert(_nsds->topology());
  InteractionsGraph::VIterator ui, uiend;
  SP::Topology topo = _nsds->topology();
  SP::InteractionsGraph indexSet2 = topo->indexSet(2);
  unsigned int nsLawSize, k = 0 ;
  SP::SiconosVector y, ydot, yddot, lambda;
  SP::LsodarOSI lsodar = std11::static_pointer_cast<LsodarOSI>(osi);
  // Solve LCP at acceleration level to calculate the lambda[2] at Interaction of indexSet[2]
  lsodar->fillXWork(sizeOfX, x);
  //
  double t = *time;
  if (!_allNSProblems->empty())
  {
    if (((*_allNSProblems)[SICONOS_OSNSP_ED_SMOOTH_ACC]->hasInteractions()))
    {
      (*_allNSProblems)[SICONOS_OSNSP_ED_SMOOTH_ACC]->compute(t);
    }
  };
  /*
     double * xdottmp = (double *)malloc(*sizeOfX*sizeof(double));
     computef(osi, sizeOfX,time,x,xdottmp);
     free(xdottmp);
     */
  // Update the output from level 0 to level 1
  _nsds->updateOutput(t,0);
  _nsds->updateOutput(t,1);
  _nsds->updateOutput(t,2);
  //
  for (std11::tie(ui, uiend) = _indexSet0->vertices(); ui != uiend; ++ui)
  {
    SP::Interaction inter = _indexSet0->bundle(*ui);
    nsLawSize = inter->nonSmoothLaw()->size();
    y = inter->y(0);   // output y at this Interaction
    ydot = inter->y(1); // output of level 1 at this Interaction
    yddot = inter->y(2);
    lambda = inter->lambda(2); // input of level 2 at this Interaction
    if (!(indexSet2->is_vertex(inter))) // if Interaction is not in the indexSet[2]
    {
      for (unsigned int i = 0; i < nsLawSize; ++i)
      {
        if ((*y)(i) > _TOL_ED)
        {
          gOut[k] = (*y)(i);
        }
        else
        {
          if ((*ydot)(i) > -_TOL_ED)
          {
            gOut[k] = 100 * _TOL_ED;
          }
          else
          {
            gOut[k] = (*y)(i);
          }
        }
        k++;
      }
    }
    else // If Interaction is in the indexSet[2]
    {
      for (unsigned int i = 0; i < nsLawSize; ++i)
      {
        if ((*lambda)(i) > _TOL_ED)
        {
          gOut[k] = (*lambda)(i); // g = lambda[2]
        }
        else
        {
          if ((*yddot)(i) > _TOL_ED)
          {
            gOut[k] = (*lambda)(i);
          }
          else
          {
            gOut[k] = 100 * _TOL_ED;
          }
        }
        k++;
      }
    }

  }
}
double D1MinusLinearOSI::computeResiduHalfExplicitAccelerationLevel()
{
  DEBUG_BEGIN("\n D1MinusLinearOSI::computeResiduHalfExplicitAccelerationLevel()\n");

  double t = _simulation->nextTime(); // end of the time step
  double told = _simulation->startingTime(); // beginning of the time step
  double h = _simulation->timeStep(); // time step length

  SP::OneStepNSProblems allOSNS  = _simulation->oneStepNSProblems(); // all OSNSP
  SP::Topology topo =  _simulation->nonSmoothDynamicalSystem()->topology();
  SP::InteractionsGraph indexSet2 = topo->indexSet(2);

  /**************************************************************************************************************
   *  Step 1-  solve a LCP at acceleration level for lambda^+_{k} for the last set indices
   *   if index2 is empty we should skip this step
   **************************************************************************************************************/

  DEBUG_PRINT("\nEVALUATE LEFT HAND SIDE\n");

  DEBUG_EXPR(std::cout<< "allOSNS->empty()   " << std::boolalpha << allOSNS->empty() << std::endl << std::endl);
  DEBUG_EXPR(std::cout<< "allOSNS->size()   "  << allOSNS->size() << std::endl << std::endl);

// -- LEFT SIDE --
  DynamicalSystemsGraph::VIterator dsi, dsend;
  for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
  {
    if (!checkOSI(dsi)) continue;
    SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

    Type::Siconos dsType = Type::value(*ds);
    SP::SiconosVector accFree;
    SP::SiconosVector work_tdg;
    SP::SiconosMatrix Mold;
    DEBUG_EXPR((*it)->display());

    if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
    {
      SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
      accFree = d->workspace(DynamicalSystem::free); /* POINTER CONSTRUCTOR : will contain
                                                       * the acceleration without contact force */
      accFree->zero();

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit
      Mold = d->mass();

      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());
      DEBUG_EXPR(Mold->display());

      if (! d->workspace(DynamicalSystem::free_tdg))
      {
        d->allocateWorkVector(DynamicalSystem::free_tdg, d->dimension()) ;
      }
      work_tdg = d->workspace(DynamicalSystem::free_tdg);
      work_tdg->zero();
      DEBUG_EXPR(work_tdg->display());

      if (d->forces())
      {
        d->computeForces(told, qold, vold);
        DEBUG_EXPR(d->forces()->display());

        *accFree += *(d->forces());
      }
      Mold->PLUForwardBackwardInPlace(*accFree); // contains left (right limit) acceleration without contact force
      d->addWorkVector(accFree,DynamicalSystem::free_tdg); // store the value in WorkFreeFree
    }
    else if(dsType == Type::NewtonEulerDS)
    {
      SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
      accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force
      accFree->zero();

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit
      //Mold = d->mass();
      assert(!d->mass()->isPLUInversed());
      Mold.reset(new SimpleMatrix(*(d->mass()))); // we copy the mass matrix to avoid its factorization
      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());
      DEBUG_EXPR(Mold->display());

      if (! d->workspace(DynamicalSystem::free_tdg))
      {
        d->allocateWorkVector(DynamicalSystem::free_tdg, d->dimension()) ;
      }

      work_tdg = d->workspace(DynamicalSystem::free_tdg);
      work_tdg->zero();
      DEBUG_EXPR(work_tdg->display());

      if (d->forces())
      {
        d->computeForces(told, qold, vold);
        DEBUG_EXPR(d->forces()->display());

        *accFree += *(d->forces());
      }
      Mold->PLUForwardBackwardInPlace(*accFree); // contains left (right limit) acceleration without contact force

      d->addWorkVector(accFree,DynamicalSystem::free_tdg); // store the value in WorkFreeFree

    }
    else
    {
      RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);
    }


    DEBUG_PRINT("accFree contains right limit acceleration at  t^+_k with contact force :\n");
    DEBUG_EXPR(accFree->display());
    DEBUG_PRINT("work_tdg contains right limit acceleration at t^+_k without contact force :\n");
    DEBUG_EXPR(work_tdg->display());

  }


  if (!allOSNS->empty())
  {
    if (indexSet2->size() >0)
    {
      InteractionsGraph::VIterator ui, uiend;
      SP::Interaction inter;
      for (std11::tie(ui, uiend) = indexSet2->vertices(); ui != uiend; ++ui)
      {
        inter = indexSet2->bundle(*ui);
        inter->relation()->computeJach(t, *inter, indexSet2->properties(*ui));
        inter->relation()->computeJacg(told, *inter, indexSet2->properties(*ui));
      }

      if (_simulation->nonSmoothDynamicalSystem()->topology()->hasChanged())
      {
        for (OSNSIterator itOsns = allOSNS->begin(); itOsns != allOSNS->end(); ++itOsns)
        {
          (*itOsns)->setHasBeenUpdated(false);
        }
      }
      assert((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]);

      if (((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->hasInteractions())) // it should be equivalent to indexSet2
      {
        DEBUG_PRINT("We compute lambda^+_{k} \n");
        (*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->compute(told);
        DEBUG_EXPR((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->display());
      }


      // Note Franck : at the time this results in a call to swapInMem of all Interactions of the NSDS
      // So let the simu do this.
      //(*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->saveInMemory(); // we push y and lambda in Memories
      _simulation->nonSmoothDynamicalSystem()->pushInteractionsInMemory();
      _simulation->nonSmoothDynamicalSystem()->updateInput(_simulation->nextTime(),2);

      for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
      {
        if (!checkOSI(dsi)) continue;
        SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

        Type::Siconos dsType = Type::value(*ds);
        if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
        {
          SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
          SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force

          SP::SiconosVector dummy(new SiconosVector(*(d->p(2)))); // value = contact force
          SP::SiconosMatrix Mold = d->mass();
          Mold->PLUForwardBackwardInPlace(*dummy);
          *accFree  += *(dummy);

          DEBUG_EXPR(d->p(2)->display());
        }
        else if (dsType == Type::NewtonEulerDS)
        {
          SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
          SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force

          SP::SiconosVector dummy(new SiconosVector(*(d->p(2)))); // value = contact force
          SP::SiconosMatrix Mold(new SimpleMatrix(*(d->mass())));  // we copy the mass matrix to avoid its factorization
          DEBUG_EXPR(Mold->display());
          Mold->PLUForwardBackwardInPlace(*dummy);
          *accFree  += *(dummy);

          DEBUG_EXPR(d->p(2)->display());

        }
        else
          RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);

      }
    }
  }

  /**************************************************************************************************************
   *  Step 2 -  compute v_{k,1}
   **************************************************************************************************************/


  DEBUG_PRINT("\n PREDICT RIGHT HAND SIDE\n");

  for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
  {
    if (!checkOSI(dsi)) continue;
    SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);


    // type of the current DS
    Type::Siconos dsType = Type::value(*ds);
    /* \warning the following conditional statement should be removed with a MechanicalDS class */
    if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
    {
      SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
      SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // contains acceleration without contact force

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0);

      // initialize *it->residuFree and predicted right velocity (left limit)
      SP::SiconosVector residuFree = ds->workspace(DynamicalSystem::freeresidu); // contains residu without nonsmooth effect
      SP::SiconosVector v = d->velocity(); //contains velocity v_{k+1}^- and not free velocity
      residuFree->zero();
      v->zero();

      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());


      *residuFree -= 0.5 * h**accFree;

      *v += h**accFree;
      *v += *vold;

      DEBUG_EXPR(residuFree->display());
      DEBUG_EXPR(v->display());

      SP::SiconosVector q = d->q(); // POINTER CONSTRUCTOR : contains position q_{k+1}
      *q = *qold;

      scal(0.5 * h, *vold + *v, *q, false);
      DEBUG_EXPR(q->display());
    }
    else if (dsType == Type::NewtonEulerDS)
    {
      SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
      SP::SiconosVector accFree = d->workspace(DynamicalSystem::free);

      // get left state from memory
      SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
      SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0);

      // initialize *it->residuFree and predicted right velocity (left limit)
      SP::SiconosVector residuFree = ds->workspace(DynamicalSystem::freeresidu); // contains residu without nonsmooth effect
      SP::SiconosVector v = d->velocity(); //contains velocity v_{k+1}^- and not free velocity
      residuFree->zero();
      v->zero();

      DEBUG_EXPR(accFree->display());
      DEBUG_EXPR(qold->display());
      DEBUG_EXPR(vold->display());


      *residuFree -= 0.5 * h**accFree;

      *v += h**accFree;
      *v += *vold;

      DEBUG_EXPR(residuFree->display());
      DEBUG_EXPR(v->display());

      //first step consists in computing  \dot q.
      //second step consists in updating q.
      //
      SP::SiconosMatrix T = d->T();
      SP::SiconosVector dotq = d->dotq();
      prod(*T, *v, *dotq, true);

      SP::SiconosVector dotqold = d->dotqMemory()->getSiconosVector(0);

      SP::SiconosVector q = d->q(); // POINTER CONSTRUCTOR : contains position q_{k+1}
      *q = *qold;

      scal(0.5 * h, *dotqold + *dotq, *q, false);
      DEBUG_PRINT("new q before normalizing\n");
      DEBUG_EXPR(q->display());
      //q[3:6] must be normalized
      d->normalizeq();
      d->computeT();
      DEBUG_PRINT("new q after normalizing\n");
      DEBUG_EXPR(q->display());



    }
    else
      RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);


    /** At this step, we obtain
     * \f[
     * \begin{cases}
     * v_{k,0} = \mbox{\tt vold} \\
     * q_{k,0} = qold \\
     * F_{k,+} = F(told,qold,vold) \\
     * Work_{freefree} =  M^{-1}_k (F^+_{k})  \mbox{stored in work_tdg} \\
     * Work_{free} =  M^{-1}_k (P^+_{2,k}+F^+_{k})  \mbox{stored in accFree} \\
     * R_{free} = -h/2 * M^{-1}_k (P^+_{2,k}+F^+_{k})  \mbox{stored in ResiduFree} \\
     * v_{k,1} = v_{k,0} + h * M^{-1}_k (P^+_{2,k}+F^+_{k})  \mbox{stored in v} \\
     * q_{k,1} = q_{k,0} + \frac{h}{2} (v_{k,0} + v_{k,1}) \mbox{stored in q} \\
     * \end{cases}
     * \f]
     **/
  }

  DEBUG_PRINT("\n DECIDE STRATEGY\n");
  /** Decide of the strategy impact or smooth multiplier.
   *  Compute _isThereImpactInTheTimeStep
   */
  _isThereImpactInTheTimeStep = false;
  if (!allOSNS->empty())
  {

    for (unsigned int level = _simulation->levelMinForOutput();
         level < _simulation->levelMaxForOutput(); level++)
    {
      _simulation->nonSmoothDynamicalSystem()->updateOutput(_simulation->nextTime(),level);
    }
    _simulation->updateIndexSets();

    SP::Topology topo =  _simulation->nonSmoothDynamicalSystem()->topology();
    SP::InteractionsGraph indexSet3 = topo->indexSet(3);

    if (indexSet3->size() > 0)
    {
      _isThereImpactInTheTimeStep = true;
      DEBUG_PRINT("There is an impact in the step. indexSet3->size() > 0. _isThereImpactInTheTimeStep = true;\n");
    }
    else
    {
      _isThereImpactInTheTimeStep = false;
      DEBUG_PRINT("There is no  impact in the step. indexSet3->size() = 0. _isThereImpactInTheTimeStep = false;\n");
    }
  }


  /* If _isThereImpactInTheTimeStep = true;
   * we recompute residuFree by removing the contribution of the nonimpulsive contact forces.
   * We add the contribution of the external forces at the end
   * of the time--step
   * If _isThereImpactInTheTimeStep = false;
   * we recompute residuFree by adding   the contribution of the external forces at the end
   * and the contribution of the nonimpulsive contact forces that are computed by solving the osnsp.
   */
  if (_isThereImpactInTheTimeStep)
  {

    DEBUG_PRINT("There is an impact in the step. indexSet3->size() > 0.  _isThereImpactInTheTimeStep = true\n");
    for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
    {
      if (!checkOSI(dsi)) continue;
      SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

      // type of the current DS
      Type::Siconos dsType = Type::value(*ds);
      /* \warning the following conditional statement should be removed with a MechanicalDS class */
      if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
      {
        SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
        SP::SiconosVector residuFree = d->workspace(DynamicalSystem::freeresidu);
        SP::SiconosVector v = d->velocity();
        SP::SiconosVector q = d->q();
        SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
        SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit

        SP::SiconosMatrix M = d->mass(); // POINTER CONSTRUCTOR : contains mass matrix

        //residuFree->zero();
        //v->zero();
        SP::SiconosVector work_tdg = d->workspace(DynamicalSystem::free_tdg);
        assert(work_tdg);
        *residuFree =  - 0.5 * h**work_tdg;


        d->computeMass();
        DEBUG_EXPR(M->display());
        if (d->forces())
        {
          d->computeForces(t, q, v);
          *work_tdg = *(d->forces());
          DEBUG_EXPR(d->forces()->display());
        }

        M->PLUForwardBackwardInPlace(*work_tdg); // contains right (left limit) acceleration without contact force
        *residuFree -= 0.5 * h**work_tdg;
        DEBUG_EXPR(residuFree->display());
      }
      else if (dsType == Type::NewtonEulerDS)
      {
        SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
        SP::SiconosVector residuFree = d->workspace(DynamicalSystem::freeresidu);
        SP::SiconosVector v = d->velocity();
        SP::SiconosVector q = d->q();
        SP::SiconosVector qold = d->qMemory()->getSiconosVector(0);
        SP::SiconosVector vold = d->velocityMemory()->getSiconosVector(0); // right limit

        SP::SiconosMatrix M(new SimpleMatrix(*(d->mass()))); // we copy the mass matrix to avoid its factorization;
        DEBUG_EXPR(M->display());

        //residuFree->zero();
        v->zero();
        SP::SiconosVector work_tdg = d->workspace(DynamicalSystem::free_tdg);
        assert(work_tdg);
        *residuFree = 0.5 * h**work_tdg;
        work_tdg->zero();

        if (d->forces())
        {
          d->computeForces(t, q, v);
          *work_tdg += *(d->forces());
        }

        M->PLUForwardBackwardInPlace(*work_tdg); // contains right (left limit) acceleration without contact force
        *residuFree -= 0.5 * h**work_tdg;
        DEBUG_EXPR(residuFree->display());
      }
      else
        RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);
    }
  }
  else
  {
    DEBUG_PRINT("There is no  impact in the step. indexSet3->size() = 0. _isThereImpactInTheTimeStep = false;\n");
    // -- RIGHT SIDE --
    // calculate acceleration without contact force

    for (std11::tie(dsi, dsend) = _dynamicalSystemsGraph->vertices(); dsi != dsend; ++dsi)
    {
      if (!checkOSI(dsi)) continue;
      SP::DynamicalSystem ds = _dynamicalSystemsGraph->bundle(*dsi);

    
      // type of the current DS
      Type::Siconos dsType = Type::value(*ds);
      /* \warning the following conditional statement should be removed with a MechanicalDS class */
      if ((dsType == Type::LagrangianDS) || (dsType == Type::LagrangianLinearTIDS))
      {

        SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (ds);
        SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force
        accFree->zero();
        // get right state from memory
        SP::SiconosVector q = d->q(); // contains position q_{k+1}
        SP::SiconosVector v = d->velocity(); // contains velocity v_{k+1}^- and not free velocity
        SP::SiconosMatrix M = d->mass(); // POINTER CONSTRUCTOR : contains mass matrix

        DEBUG_EXPR(accFree->display());
        DEBUG_EXPR(q->display());
        DEBUG_EXPR(v->display());
        // Lagrangian Nonlinear Systems
        if (dsType == Type::LagrangianDS || dsType == Type::LagrangianLinearTIDS)
        {
          d->computeMass();

          DEBUG_EXPR(M->display());
          if (d->forces())
          {
            d->computeForces(t, q, v);
            *accFree += *(d->forces());
          }
        }
        else
          RuntimeException::selfThrow
          ("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);

        M->PLUForwardBackwardInPlace(*accFree); // contains right (left limit) acceleration without contact force
        DEBUG_PRINT("accFree contains left limit acceleration at  t^-_{k+1} without contact force :\n");
        DEBUG_EXPR(accFree->display());
       }
      else if (dsType == Type::NewtonEulerDS)
      {
        SP::NewtonEulerDS d = std11::static_pointer_cast<NewtonEulerDS> (ds);
        SP::SiconosVector accFree = d->workspace(DynamicalSystem::free); // POINTER CONSTRUCTOR : contains acceleration without contact force
        accFree->zero();
        // get right state from memory
        SP::SiconosVector q = d->q(); // contains position q_{k+1}
        SP::SiconosVector v = d->velocity(); // contains velocity v_{k+1}^- and not free velocity
        SP::SiconosMatrix M(new SimpleMatrix(*(d->mass()))); // we copy the mass matrix to avoid its factorization;

        DEBUG_EXPR(accFree->display());
        DEBUG_EXPR(q->display());
        DEBUG_EXPR(v->display());

        if (d->forces())
        {
          d->computeForces(t, q, v);
          *accFree += *(d->forces());
        }

        M->PLUForwardBackwardInPlace(*accFree); // contains right (left limit) acceleration without contact force
        DEBUG_PRINT("accFree contains left limit acceleration at  t^-_{k+1} without contact force :\n");
        DEBUG_EXPR(accFree->display());
      }
      else
        RuntimeException::selfThrow("D1MinusLinearOSI::computeResidu - not yet implemented for Dynamical system type: " + dsType);

    }

    // solve a LCP at acceleration level only for contacts which have been active at the beginning of the time-step
    if (!allOSNS->empty())
    {
      // for (unsigned int level = _simulation->levelMinForOutput(); level < _simulation->levelMaxForOutput(); level++)
      // {
      //   _simulation->updateOutput(level);
      // }
      // _simulation->updateIndexSets();
      DEBUG_PRINT("We compute lambda^-_{k+1} \n");
      InteractionsGraph::VIterator ui, uiend;
      SP::Interaction inter;
      for (std11::tie(ui, uiend) = indexSet2->vertices(); ui != uiend; ++ui)
      {
        inter = indexSet2->bundle(*ui);
        inter->relation()->computeJach(t, *inter, indexSet2->properties(*ui));
        inter->relation()->computeJacg(t, *inter, indexSet2->properties(*ui));
      }
      if (_simulation->nonSmoothDynamicalSystem()->topology()->hasChanged())
      {
        for (OSNSIterator itOsns = allOSNS->begin(); itOsns != allOSNS->end(); ++itOsns)
        {
          (*itOsns)->setHasBeenUpdated(false);
        }
      }

      if (((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->hasInteractions()))
      {
        (*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->compute(t);
        DEBUG_EXPR((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY + 1]->display(););
        _simulation->nonSmoothDynamicalSystem()->updateInput(_simulation->nextTime(),2);
      }
Ejemplo n.º 7
0
void TimeStepping::updateIndexSet(unsigned int i)
{
  // To update IndexSet i: add or remove Interactions from
  // this set, depending on y values.
  // boost::default_color_type is used to organize update in InteractionsGraph:
  // - white_color : undiscovered vertex (Interaction)
  // - gray_color : discovered vertex (Interaction) but searching descendants
  // - black_color : discovered vertex (Interaction) together with the descendants

  assert(_nsds);
  assert(_nsds->topology());

  SP::Topology topo = _nsds->topology();

  assert(i < topo->indexSetsSize() &&
         "TimeStepping::updateIndexSet(i), indexSets[i] does not exist.");
  // IndexSets[0] must not be updated in simulation, since it belongs to Topology.
  assert(i > 0 &&
         "TimeStepping::updateIndexSet(i=0), indexSets[0] cannot be updated.");

  // For all Interactions in indexSet[i-1], compute y[i-1] and
  // update the indexSet[i].
  SP::InteractionsGraph indexSet0 = topo->indexSet(0);
  SP::InteractionsGraph indexSet1 = topo->indexSet(1);
  assert(indexSet0);
  assert(indexSet1);
  DynamicalSystemsGraph& DSG0= *nonSmoothDynamicalSystem()->dynamicalSystems();
  topo->setHasChanged(false);

  DEBUG_PRINTF("TimeStepping::updateIndexSet(unsigned int i). update indexSets start : indexSet0 size : %ld\n", indexSet0->size());
  DEBUG_PRINTF("TimeStepping::updateIndexSet(unsigned int i). update IndexSets start : indexSet1 size : %ld\n", indexSet1->size());

  // Check indexSet1
  InteractionsGraph::VIterator ui1, ui1end, v1next;
  std11::tie(ui1, ui1end) = indexSet1->vertices();

  //Remove interactions from the indexSet1
  for (v1next = ui1; ui1 != ui1end; ui1 = v1next)
  {
    ++v1next;

    SP::Interaction inter1 = indexSet1->bundle(*ui1);
    if (indexSet0->is_vertex(inter1))
    {
      InteractionsGraph::VDescriptor inter1_descr0 = indexSet0->descriptor(inter1);

      assert((indexSet0->color(inter1_descr0) == boost::white_color));

      indexSet0->color(inter1_descr0) = boost::gray_color;
      if (Type::value(*(inter1->nonSmoothLaw())) != Type::EqualityConditionNSL)
      {
	// We assume that the integrator of the ds1 drive the update of the index set
        //SP::OneStepIntegrator Osi = indexSet1->properties(*ui1).osi;
	SP::DynamicalSystem ds1 = indexSet1->properties(*ui1).source;
	OneStepIntegrator& osi = *DSG0.properties(DSG0.descriptor(ds1)).osi;

        //if(predictorDeactivate(inter1,i))
        if (osi.removeInteractionFromIndexSet(inter1, i))
        {
          // Interaction is not active
          // ui1 becomes invalid
          indexSet0->color(inter1_descr0) = boost::black_color;

          indexSet1->eraseProperties(*ui1);

          InteractionsGraph::OEIterator oei, oeiend;
          for (std11::tie(oei, oeiend) = indexSet1->out_edges(*ui1);
               oei != oeiend; ++oei)
          {
            InteractionsGraph::EDescriptor ed1, ed2;
            std11::tie(ed1, ed2) = indexSet1->edges(indexSet1->source(*oei), indexSet1->target(*oei));
            if (ed2 != ed1)
            {
              indexSet1->eraseProperties(ed1);
              indexSet1->eraseProperties(ed2);
            }
            else
            {
              indexSet1->eraseProperties(ed1);
            }
          }
          indexSet1->remove_vertex(inter1);
          /* \warning V.A. 25/05/2012 : Multiplier lambda are only set to zero if they are removed from the IndexSet*/
          inter1->lambda(1)->zero();
          topo->setHasChanged(true);
        }
      }
    }
    else
    {
      // Interaction is not in indexSet0 anymore.
      // ui1 becomes invalid
      indexSet1->eraseProperties(*ui1);
      InteractionsGraph::OEIterator oei, oeiend;
      for (std11::tie(oei, oeiend) = indexSet1->out_edges(*ui1);
           oei != oeiend; ++oei)
      {
        InteractionsGraph::EDescriptor ed1, ed2;
        std11::tie(ed1, ed2) = indexSet1->edges(indexSet1->source(*oei), indexSet1->target(*oei));
        if (ed2 != ed1)
        {
          indexSet1->eraseProperties(ed1);
          indexSet1->eraseProperties(ed2);
        }
        else
        {
          indexSet1->eraseProperties(ed1);
        }
      }

      indexSet1->remove_vertex(inter1);
      topo->setHasChanged(true);
    }
  }

  // indexSet0\indexSet1 scan
  InteractionsGraph::VIterator ui0, ui0end;
  //Add interaction in indexSet1
  for (std11::tie(ui0, ui0end) = indexSet0->vertices(); ui0 != ui0end; ++ui0)
  {
    if (indexSet0->color(*ui0) == boost::black_color)
    {
      // reset
      indexSet0->color(*ui0) = boost::white_color ;
    }
    else
    {
      if (indexSet0->color(*ui0) == boost::gray_color)
      {
        // reset
        indexSet0->color(*ui0) = boost::white_color;

        assert(indexSet1->is_vertex(indexSet0->bundle(*ui0)));
        /*assert( { !predictorDeactivate(indexSet0->bundle(*ui0),i) ||
          Type::value(*(indexSet0->bundle(*ui0)->nonSmoothLaw())) == Type::EqualityConditionNSL ;
          });*/
      }
      else
      {
        assert(indexSet0->color(*ui0) == boost::white_color);

        SP::Interaction inter0 = indexSet0->bundle(*ui0);
        assert(!indexSet1->is_vertex(inter0));
        bool activate = true;
        if (Type::value(*(inter0->nonSmoothLaw())) != Type::EqualityConditionNSL
            && Type::value(*(inter0->nonSmoothLaw())) != Type::RelayNSL)
        {
          //SP::OneStepIntegrator Osi = indexSet0->properties(*ui0).osi;
	  // We assume that the integrator of the ds1 drive the update of the index set
	  SP::DynamicalSystem ds1 = indexSet1->properties(*ui0).source;
	  OneStepIntegrator& osi = *DSG0.properties(DSG0.descriptor(ds1)).osi;

          activate = osi.addInteractionInIndexSet(inter0, i);
        }
        if (activate)
        {
          assert(!indexSet1->is_vertex(inter0));

          // vertex and edges insertion in indexSet1
          indexSet1->copy_vertex(inter0, *indexSet0);
          topo->setHasChanged(true);
          assert(indexSet1->is_vertex(inter0));
        }
      }
    }
  }

  assert(indexSet1->size() <= indexSet0->size());

  DEBUG_PRINTF("TimeStepping::updateIndexSet(unsigned int i). update indexSets end : indexSet0 size : %ld\n", indexSet0->size());
  DEBUG_PRINTF("TimeStepping::updateIndexSet(unsigned int i). update IndexSets end : indexSet1 size : %ld\n", indexSet1->size());
}
Ejemplo n.º 8
0
int main(int argc, char* argv[])
{
  try
  {
    // ================= Creation of the model =======================

    // parameters according to Table 1
    unsigned int nDof = 3; // degrees of freedom for robot arm
    double t0 = 0;         // initial computation time
    double T = 0.2;       // final computation time
    double h = 1e-5;       // time step : do not decrease, because of strong penetrations

    // initial conditions
    SP::SiconosVector q0(new SiconosVector(nDof));
    SP::SiconosVector v0(new SiconosVector(nDof));
    q0->zero();
    (*q0)(0) = y_0;
    (*q0)(1) = phi_0;	
    v0->zero();
    (*v0)(0) = v_0;
    (*v0)(1) = omega_0;

    // -------------------------
    // --- Dynamical systems ---
    // -------------------------
    cout << "====> Model loading ..." << endl << endl;

    SP::LagrangianDS slider(new LagrangianDS(q0, v0, "OscillatorPlugin:mass"));
    slider->setComputeNNLFunction("OscillatorPlugin", "NNL");
    slider->setComputeJacobianNNLqFunction("OscillatorPlugin", "jacobianNNLq");
    slider->setComputeJacobianNNLqDotFunction("OscillatorPlugin", "jacobianNNLqDot");
    slider->setComputeFIntFunction("OscillatorPlugin", "FInt");
    slider->setComputeJacobianFIntqFunction("OscillatorPlugin", "jacobianFIntq");
    slider->setComputeJacobianFIntqDotFunction("OscillatorPlugin", "jacobianFIntqDot");

    // -------------------
    // --- Interactions---
    // -------------------
    // -- corner 1 --
#ifdef WITH_FRICTION
    SP::NonSmoothLaw nslaw1(new NewtonImpactFrictionNSL(eN1, eT1, mu1, 2));
    SP::Relation relation1(new LagrangianScleronomousR("SliderCrankPlugin:g1", "SliderCrankPlugin:W1"));
    SP::Interaction inter1(new Interaction(2, nslaw1, relation1, 1));

    // -- corner 2 --
    SP::NonSmoothLaw nslaw2(new NewtonImpactFrictionNSL(eN2, eT2, mu2, 2));
    SP::Relation relation2(new LagrangianScleronomousR("SliderCrankPlugin:g2", "SliderCrankPlugin:W2"));
    SP::Interaction inter2(new Interaction(2, nslaw2, relation2, 2));

    // -- corner 3 --
    SP::NonSmoothLaw nslaw3(new NewtonImpactFrictionNSL(eN3, eT3, mu3, 2));
    SP::Relation relation3(new LagrangianScleronomousR("SliderCrankPlugin:g3", "SliderCrankPlugin:W3"));
    SP::Interaction inter3(new Interaction(2, nslaw3, relation3, 3));

    // -- corner 4 --
    SP::NonSmoothLaw nslaw4(new NewtonImpactFrictionNSL(eN4, eT4, mu4, 2));
    SP::Relation relation4(new LagrangianScleronomousR("SliderCrankPlugin:g4", "SliderCrankPlugin:W4"));
    SP::Interaction inter4(new Interaction(2, nslaw4, relation4, 4));
#else
    // -- corner 1 --
    SP::NonSmoothLaw nslaw1(new NewtonImpactNSL(eN1));
    SP::Relation relation1(new LagrangianScleronomousR("SliderCrankPlugin:g1", "SliderCrankPlugin:W1"));
    SP::Interaction inter1(new Interaction(1, nslaw1, relation1, 1));

    // -- corner 2 --
    SP::NonSmoothLaw nslaw2(new NewtonImpactNSL(eN2));
    SP::Relation relation2(new LagrangianScleronomousR("SliderCrankPlugin:g2", "SliderCrankPlugin:W2"));
    SP::Interaction inter2(new Interaction(1, nslaw2, relation2, 2));

    // -- corner 3 --
    SP::NonSmoothLaw nslaw3(new NewtonImpactNSL(eN3));
    SP::Relation relation3(new LagrangianScleronomousR("SliderCrankPlugin:g3", "SliderCrankPlugin:W3"));
    SP::Interaction inter3(new Interaction(1, nslaw3, relation3, 3));

    // -- corner 4 --
    SP::NonSmoothLaw nslaw4(new NewtonImpactNSL(eN4));
    SP::Relation relation4(new LagrangianScleronomousR("SliderCrankPlugin:g4", "SliderCrankPlugin:W4"));
    SP::Interaction inter4(new Interaction(1, nslaw4, relation4, 4));
#endif

    // -------------
    // --- Model ---
    // -------------
    SP::Model sliderWithClearance(new Model(t0, T));
    sliderWithClearance->nonSmoothDynamicalSystem()->insertDynamicalSystem(slider);
    sliderWithClearance->nonSmoothDynamicalSystem()->link(inter1, slider);
    sliderWithClearance->nonSmoothDynamicalSystem()->link(inter2, slider);
    sliderWithClearance->nonSmoothDynamicalSystem()->link(inter3, slider);
    sliderWithClearance->nonSmoothDynamicalSystem()->link(inter4, slider);

    // ----------------
    // --- Simulation ---
    // ----------------
    SP::MoreauJeanOSI OSI(new MoreauJeanOSI(slider, 0.5, 0.0));
    SP::TimeDiscretisation t(new TimeDiscretisation(t0, h));
#ifdef WITH_FRICTION
    SP::OneStepNSProblem impact(new FrictionContact(2, SICONOS_FRICTION_2D_ENUM));
#else
    SP::OneStepNSProblem impact(new LCP(SICONOS_LCP_LEMKE));
#endif
    impact->numericsSolverOptions()->dparam[0] = 1e-08;
    impact->numericsSolverOptions()->iparam[0] = 100;
    impact->numericsSolverOptions()->iparam[2] = 1; // random
    SP::TimeStepping s(new TimeStepping(t));
    s->insertIntegrator(OSI);
    s->insertNonSmoothProblem(impact, SICONOS_OSNSP_TS_VELOCITY);
    s->setNewtonTolerance(1e-10);
    s->setNewtonMaxIteration(200);

    SP::Topology topo = sliderWithClearance->nonSmoothDynamicalSystem()->topology();
    // =========================== End of model definition ===========================

    // ================================= Computation =================================

    // --- Simulation initialization ---
    cout << "====> Initialisation ..." << endl << endl;
    sliderWithClearance->initialize(s);
    int N = ceil((T - t0) / h) + 1; // Number of time steps

    // --- Get the values to be plotted ---
    // -> saved in a matrix dataPlot
    unsigned int outputSize = 27;
    SimpleMatrix dataPlot(N + 1, outputSize);

    SP::SiconosVector q = slider->q();
    SP::SiconosVector v = slider->velocity();

    dataPlot(0, 0) = sliderWithClearance->t0();
    dataPlot(0, 1) = (*q)(0) / (2.*M_PI); // crank revolution
    dataPlot(0, 2) = (*q)(1);
    dataPlot(0, 3) = (*q)(2);
    dataPlot(0, 4) = (*v)(0);
    dataPlot(0, 5) = (*v)(1);
    dataPlot(0, 6) = (*v)(2);
    dataPlot(0, 7) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) - a * sin((*q)(2)) + b * cos((*q)(2)) - b) / c; // y corner 1 (normalized)
    dataPlot(0, 8) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) + a * sin((*q)(2)) + b * cos((*q)(2)) - b) / c; // y corner 2 (normalized)
    dataPlot(0, 9) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) - a * sin((*q)(2)) - b * cos((*q)(2)) + b) / (-c); // y corner 3 (normalized)
    dataPlot(0, 10) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) + a * sin((*q)(2)) - b * cos((*q)(2)) + b) / (-c); // y corner 4 (normalized)
    dataPlot(0, 11) = (l1 * cos((*q)(0)) + l2 * cos((*q)(1)) - l2) / l1; // x slider (normalized)
    dataPlot(0, 12) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1))) / c; // y slider (normalized
    dataPlot(0, 13) = (*inter1->y(0))(0) ; // g1
    dataPlot(0, 14) = (*inter2->y(0))(0) ; // g2
    dataPlot(0, 15) = (*inter3->y(0))(0) ; // g3
    dataPlot(0, 16) = (*inter4->y(0))(0) ; // g4
    dataPlot(0, 17) = (*inter1->y(1))(0) ; // dot g1
    dataPlot(0, 18) = (*inter2->y(1))(0) ; // dot g2
    dataPlot(0, 19) = (*inter3->y(1))(0) ; // dot g3
    dataPlot(0, 20) = (*inter4->y(1))(0) ; // dot g4
    dataPlot(0, 21) = (*inter1->lambda(1))(0) ; // lambda1
    dataPlot(0, 22) = (*inter2->lambda(1))(0) ; // lambda1
    dataPlot(0, 23) = (*inter3->lambda(1))(0) ; // lambda3
    dataPlot(0, 24) = (*inter4->lambda(1))(0) ; // lambda4
    dataPlot(0, 25) = 0;
    dataPlot(0, 26) = 0;

    // --- Time loop ---
    cout << "====> Start computation ... " << endl << endl;

    // ==== Simulation loop - Writing without explicit event handling =====
    int k = 1;
    boost::progress_display show_progress(N);

    boost::timer time;
    time.restart();
    SP::InteractionsGraph indexSet1 = topo->indexSet(1);

    while ((s->hasNextEvent()) && (k<= 3000))
//    while ((s->hasNextEvent()))
    {

      std::cout <<"=====================================================" <<std::endl;
      std::cout <<"=====================================================" <<std::endl;
      std::cout <<"=====================================================" <<std::endl;
      std::cout <<"Iteration k = " << k <<std::endl;
      std::cout <<"s->nextTime() = " <<s->nextTime()  <<std::endl;
      std::cout <<"=====================================================" <<std::endl;



      //std::cout << "=============== Step k ="<< k<< std::endl;
      s->advanceToEvent();
      impact->setNumericsVerboseMode(0);
      // --- Get values to be plotted ---
      dataPlot(k, 0) = s->nextTime();
      dataPlot(k, 1) = (*q)(0) / (2.*M_PI); // crank revolution
      dataPlot(k, 2) = (*q)(1);
      dataPlot(k, 3) = (*q)(2);
      dataPlot(k, 4) = (*v)(0);
      dataPlot(k, 5) = (*v)(1);
      dataPlot(k, 6) = (*v)(2);
      dataPlot(k, 7) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) - a * sin((*q)(2)) + b * cos((*q)(2)) - b) / c; // y corner 1 (normalized)
      dataPlot(k, 8) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) + a * sin((*q)(2)) + b * cos((*q)(2)) - b) / c; // y corner 2 (normalized)
      dataPlot(k, 9) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) - a * sin((*q)(2)) - b * cos((*q)(2)) + b) / (c); // y corner 3 (normalized)
      dataPlot(k, 10) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1)) + a * sin((*q)(2)) - b * cos((*q)(2)) + b) / (c); // y corner 4 (normalized)
      dataPlot(k, 11) = (l1 * cos((*q)(0)) + l2 * cos((*q)(1)) - l2) / l1; // x slider (normalized)
      dataPlot(k, 12) = (l1 * sin((*q)(0)) + l2 * sin((*q)(1))) / c; // y slider (normalized)
      dataPlot(k, 13) = (*inter1->y(0))(0) ; // g1
      dataPlot(k, 14) = (*inter2->y(0))(0) ; // g2
      dataPlot(k, 15) = (*inter3->y(0))(0) ; // g3
      dataPlot(k, 16) = (*inter4->y(0))(0) ; // g4
      dataPlot(k, 17) = (*inter1->y(1))(0) ; // dot g1
      dataPlot(k, 18) = (*inter2->y(1))(0) ; // dot g2
      dataPlot(k, 19) = (*inter3->y(1))(0) ; // dot g3
      dataPlot(k, 20) = (*inter4->y(1))(0) ; // dot g4
      dataPlot(k, 21) = (*inter1->lambda(1))(0) ; // lambda1
      dataPlot(k, 22) = (*inter2->lambda(1))(0) ; // lambda1
      dataPlot(k, 23) = (*inter3->lambda(1))(0) ; // lambda3
      dataPlot(k, 24) = (*inter4->lambda(1))(0) ; // lambda4
      dataPlot(k, 25) = s->getNewtonNbSteps();
      dataPlot(k, 26) = indexSet1->size();

      if (indexSet1->size() > 5)
      {
        impact->display();
      }
      //      if (s->nextTime() > 0.035 and (*inter1->lambda(1))(0) >0.0)
#ifdef DISPLAY_INTER
        std::cout << "=============== Step k =" << k << std::endl;
        std::cout << "Time " << s->nextTime() << std::endl;

        impact->display();
        std::cout << " (*inter1->lambda(1))(0) " << (*inter1->lambda(1))(0) << std:: endl;
        std::cout << " (*inter2->lambda(1))(0) " << (*inter2->lambda(1))(0) << std:: endl;
        std::cout << " (*inter3->lambda(1))(0) " << (*inter3->lambda(1))(0) << std:: endl;
        std::cout << " (*inter4->lambda(1))(0) " << (*inter4->lambda(1))(0) << std:: endl;
#endif

      s->processEvents();
      ++show_progress;
      k++;
    }

    cout << endl << "End of computation - Number of iterations done: " << k - 1 << endl;
    cout << "Computation Time " << time.elapsed()  << endl;

    // --- Output files ---
    cout << "====> Output file writing ..." << endl;
    dataPlot.resize(k, outputSize);
    ioMatrix::write("result.dat", "ascii", dataPlot, "noDim");
  }

  catch (SiconosException e)
  {
    cout << e.report() << endl;
  }
  catch (...)
  {
    cout << "Exception caught in SliderCrankD1MinusLinearOSI.cpp" << endl;
  }
}