static int sun4i_ts_probe(struct platform_device *pdev)
{
struct sun4i_ts_data *ts;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device *hwmon;
int error;
u32 reg;
bool ts_attached;
u32 tp_sensitive_adjust = 15;
u32 filter_type = 1;
ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
if (!ts)
return -ENOMEM;
ts->dev = dev;
ts->ignore_fifo_data = true;
ts->temp_data = -1;
if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) {
/* Allwinner SDK has temperature (C) = (value / 6) - 271 */
ts->temp_offset = 271000;
ts->temp_step = 167;
} else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) {
/*
* The A10 temperature sensor has quite a wide spread, these
* parameters are based on the averaging of the calibration
* results of 4 completely different boards, with a spread of
* temp_step from 0.096 - 0.170 and temp_offset from 176 - 331.
*/
ts->temp_offset = 257000;
ts->temp_step = 133;
} else {
/*
* The user manuals do not contain the formula for calculating
* the temperature. The formula used here is from the AXP209,
* which is designed by X-Powers, an affiliate of Allwinner:
*
* temperature (C) = (value * 0.1) - 144.7
*
* Allwinner does not have any documentation whatsoever for
* this hardware. Moreover, it is claimed that the sensor
* is inaccurate and cannot work properly.
*/
ts->temp_offset = 144700;
ts->temp_step = 100;
}
ts_attached = of_property_read_bool(np, "allwinner,ts-attached");
if (ts_attached) {
ts->input = devm_input_allocate_device(dev);
if (!ts->input)
return -ENOMEM;
ts->input->name = pdev->name;
ts->input->phys = "sun4i_ts/input0";
ts->input->open = sun4i_ts_open;
ts->input->close = sun4i_ts_close;
ts->input->id.bustype = BUS_HOST;
ts->input->id.vendor = 0x0001;
ts->input->id.product = 0x0001;
ts->input->id.version = 0x0100;
ts->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
__set_bit(BTN_TOUCH, ts->input->keybit);
input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
input_set_drvdata(ts->input, ts);
}
ts->base = devm_ioremap_resource(dev,
platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (IS_ERR(ts->base))
return PTR_ERR(ts->base);
ts->irq = platform_get_irq(pdev, 0);
error = devm_request_irq(dev, ts->irq, sun4i_ts_irq, 0, "sun4i-ts", ts);
if (error)
return error;
/*
* Select HOSC clk, clkin = clk / 6, adc samplefreq = clkin / 8192,
* t_acq = clkin / (16 * 64)
*/
writel(ADC_CLK_SEL(0) | ADC_CLK_DIV(2) | FS_DIV(7) | T_ACQ(63),
ts->base + TP_CTRL0);
/*
* tp_sensitive_adjust is an optional property
* tp_mode = 0 : only x and y coordinates, as we don't use dual touch
*/
of_property_read_u32(np, "allwinner,tp-sensitive-adjust",
&tp_sensitive_adjust);
writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0),
ts->base + TP_CTRL2);
/*
* Enable median and averaging filter, optional property for
* filter type.
*/
of_property_read_u32(np, "allwinner,filter-type", &filter_type);
writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3);
/* Enable temperature measurement, period 1953 (2 seconds) */
writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
/*
* Set stylus up debounce to aprox 10 ms, enable debounce, and
* finally enable tp mode.
*/
reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1);
if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts"))
reg |= SUN6I_TP_MODE_EN(1);
else
reg |= TP_MODE_EN(1);
writel(reg, ts->base + TP_CTRL1);
/*
* The thermal core does not register hwmon devices for DT-based
* thermal zone sensors, such as this one.
*/
hwmon = devm_hwmon_device_register_with_groups(ts->dev, "sun4i_ts",
ts, sun4i_ts_groups);
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
devm_thermal_zone_of_sensor_register(ts->dev, 0, ts, &sun4i_ts_tz_ops);
writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
if (ts_attached) {
error = input_register_device(ts->input);
if (error) {
writel(0, ts->base + TP_INT_FIFOC);
return error;
}
}
platform_set_drvdata(pdev, ts);
return 0;
}
static int sun4i_ts_probe(struct platform_device *pdev)
{
struct sun4i_ts_data *ts;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device *hwmon;
int error;
bool ts_attached;
ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
if (!ts)
return -ENOMEM;
ts->dev = dev;
ts->ignore_fifo_data = true;
ts->temp_data = -1;
ts_attached = of_property_read_bool(np, "allwinner,ts-attached");
if (ts_attached) {
ts->input = devm_input_allocate_device(dev);
if (!ts->input)
return -ENOMEM;
ts->input->name = pdev->name;
ts->input->phys = "sun4i_ts/input0";
ts->input->open = sun4i_ts_open;
ts->input->close = sun4i_ts_close;
ts->input->id.bustype = BUS_HOST;
ts->input->id.vendor = 0x0001;
ts->input->id.product = 0x0001;
ts->input->id.version = 0x0100;
ts->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
__set_bit(BTN_TOUCH, ts->input->keybit);
input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
input_set_drvdata(ts->input, ts);
}
ts->base = devm_ioremap_resource(dev,
platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (IS_ERR(ts->base))
return PTR_ERR(ts->base);
ts->irq = platform_get_irq(pdev, 0);
error = devm_request_irq(dev, ts->irq, sun4i_ts_irq, 0, "sun4i-ts", ts);
if (error)
return error;
/*
* Select HOSC clk, clkin = clk / 6, adc samplefreq = clkin / 8192,
* t_acq = clkin / (16 * 64)
*/
writel(ADC_CLK_SEL(0) | ADC_CLK_DIV(2) | FS_DIV(7) | T_ACQ(63),
ts->base + TP_CTRL0);
/*
* sensitive_adjust = 15 : max, which is not all that sensitive,
* tp_mode = 0 : only x and y coordinates, as we don't use dual touch
*/
writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
ts->base + TP_CTRL2);
/* Enable median filter, type 1 : 5/3 */
writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
/* Enable temperature measurement, period 1953 (2 seconds) */
writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
/*
* Set stylus up debounce to aprox 10 ms, enable debounce, and
* finally enable tp mode.
*/
writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1),
ts->base + TP_CTRL1);
hwmon = devm_hwmon_device_register_with_groups(ts->dev, "sun4i_ts",
ts, sun4i_ts_groups);
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
if (ts_attached) {
error = input_register_device(ts->input);
if (error) {
writel(0, ts->base + TP_INT_FIFOC);
return error;
}
}
platform_set_drvdata(pdev, ts);
return 0;
}
